Re: Problems with X11 on Ultra10
On Sat, 03 May 2014 17:20:33 -0600 Hayden Kroepfl perlpow...@gmail.com wrote: On 03/05/14 03:39 PM, Sad Clouds wrote: Hello, I'm new to Debian and trying it out on Ultra10 which has Creator3D framebuffer. I installed Debian stable and seem to be having some issues with X11 or display manager. The system boots OK and I can see boot messages, but when it goes to start display manager the screen goes black and nothing happens. No windows, no mouse cursor, nothing. Any ideas? Might as well ask about the obvious right away, do you have your monitor hooked up to the onboard video in the bottom left corner (facing the back), or to the 13W3 video connector on the Creator3D? What could be happening is X11 picked the wrong card by default and is only showing it on the opposite connector. If you have a second monitor try hooking one up to the 13W3 and one to the VGA connector. Hayden K. Hello, that was the first thing I tried however there is no VGA signal on machfb. I managed to get IP address assigned to this machine from DHCP server, logged in via ssh and looked at the logs. Looks like X server has problems configuring framebuffer device. So I generated xorg.conf manually with 'X -configure' and it thinks I have 3 cards: Identifier Card0 Driver mach64 BusID PCI:1:2:0 Identifier Card1 Driver fbdev BusID PCI:1:2:0 Identifier Card2 Driver vesa BusID PCI:1:2:0 This looks wrong to me, one of them should be using sunffb driver. And why all three drivers refer to the same BusID? I tried copying this file to /etc/X11/xorg.conf and leaving only Identifier Card1 Driver sunffb BusID PCI:1:2:0 But still can't get X11 running Any ideas? -- To UNSUBSCRIBE, email to debian-alpha-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20140504082516.c8adb9d67a6a3039cfe2a...@googlemail.com
Re: Problems with X11 on Ultra10
On Sun, 4 May 2014 08:25:16 +0100 Sad Clouds cryintotheblue...@googlemail.com wrote: On Sat, 03 May 2014 17:20:33 -0600 Hayden Kroepfl perlpow...@gmail.com wrote: On 03/05/14 03:39 PM, Sad Clouds wrote: Hello, I'm new to Debian and trying it out on Ultra10 which has Creator3D framebuffer. I installed Debian stable and seem to be having some issues with X11 or display manager. The system boots OK and I can see boot messages, but when it goes to start display manager the screen goes black and nothing happens. No windows, no mouse cursor, nothing. Any ideas? Might as well ask about the obvious right away, do you have your monitor hooked up to the onboard video in the bottom left corner (facing the back), or to the 13W3 video connector on the Creator3D? What could be happening is X11 picked the wrong card by default and is only showing it on the opposite connector. If you have a second monitor try hooking one up to the 13W3 and one to the VGA connector. Hayden K. Hello, that was the first thing I tried however there is no VGA signal on machfb. I managed to get IP address assigned to this machine from DHCP server, logged in via ssh and looked at the logs. Looks like X server has problems configuring framebuffer device. So I generated xorg.conf manually with 'X -configure' and it thinks I have 3 cards: Identifier Card0 Driver mach64 BusID PCI:1:2:0 Identifier Card1 Driver fbdev BusID PCI:1:2:0 Identifier Card2 Driver vesa BusID PCI:1:2:0 This looks wrong to me, one of them should be using sunffb driver. And why all three drivers refer to the same BusID? I tried copying this file to /etc/X11/xorg.conf and leaving only Identifier Card1 Driver sunffb BusID PCI:1:2:0 But still can't get X11 running Any ideas? OK changed that to BusID SBUS:/SUNW,ffb@1e,0 and X11 works now. -- To UNSUBSCRIBE, email to debian-alpha-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20140504085745.1a1891593485ab7e82a14...@googlemail.com
Re: Problems with X11 on Ultra10
Hi, I was curious as to what prompted you to try SBUS:/SUNW,ffb@1e,0 for the BusID value? Thanks, Dave -Original Message- From: Sad Clouds Sent: Sunday, May 04, 2014 3:57 AM To: Hayden Kroepfl Cc: debian-po...@lists.debian.org Subject: Re: Problems with X11 on Ultra10 On Sun, 4 May 2014 08:25:16 +0100 Sad Clouds cryintotheblue...@googlemail.com wrote: On Sat, 03 May 2014 17:20:33 -0600 Hayden Kroepfl perlpow...@gmail.com wrote: On 03/05/14 03:39 PM, Sad Clouds wrote: Hello, I'm new to Debian and trying it out on Ultra10 which has Creator3D framebuffer. I installed Debian stable and seem to be having some issues with X11 or display manager. The system boots OK and I can see boot messages, but when it goes to start display manager the screen goes black and nothing happens. No windows, no mouse cursor, nothing. Any ideas? Might as well ask about the obvious right away, do you have your monitor hooked up to the onboard video in the bottom left corner (facing the back), or to the 13W3 video connector on the Creator3D? What could be happening is X11 picked the wrong card by default and is only showing it on the opposite connector. If you have a second monitor try hooking one up to the 13W3 and one to the VGA connector. Hayden K. Hello, that was the first thing I tried however there is no VGA signal on machfb. I managed to get IP address assigned to this machine from DHCP server, logged in via ssh and looked at the logs. Looks like X server has problems configuring framebuffer device. So I generated xorg.conf manually with 'X -configure' and it thinks I have 3 cards: Identifier Card0 Driver mach64 BusID PCI:1:2:0 Identifier Card1 Driver fbdev BusID PCI:1:2:0 Identifier Card2 Driver vesa BusID PCI:1:2:0 This looks wrong to me, one of them should be using sunffb driver. And why all three drivers refer to the same BusID? I tried copying this file to /etc/X11/xorg.conf and leaving only Identifier Card1 Driver sunffb BusID PCI:1:2:0 But still can't get X11 running Any ideas? OK changed that to BusID SBUS:/SUNW,ffb@1e,0 and X11 works now. -- To UNSUBSCRIBE, email to debian-powerpc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20140504085745.1a1891593485ab7e82a14...@googlemail.com -- To UNSUBSCRIBE, email to debian-alpha-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/A073714047E1467D83D0E44AD63B4AC6@Sam
Re: Problems with X11 on Ultra10, BusID value
Op 2014-05-04 om 13:38 schreef David Gosselin: From: Sad Clouds Sent: Sunday, May 04, 2014 3:57 AM On Sun, 4 May 2014 08:25:16 +0100 Sad Clouds wrote: On Sat, 03 May 2014 17:20:33 -0600 Hayden Kroepfl wrote: On 03/05/14 03:39 PM, Sad Clouds wrote: Hello, I'm new to Debian and trying it out on Ultra10 which has Creator3D framebuffer. I installed Debian stable and seem to be having some issues with X11 or display manager. The system boots OK and I can see boot messages, but when it goes to start display manager the screen goes black and nothing happens. No windows, no mouse cursor, nothing. Any ideas? Might as well ask about the obvious right away, do you have your monitor hooked up to the onboard video in the bottom left corner (facing the back), or to the 13W3 video connector on the Creator3D? What could be happening is X11 picked the wrong card by default and is only showing it on the opposite connector. If you have a second monitor try hooking one up to the 13W3 and one to the VGA connector. Hayden K. Hello, that was the first thing I tried however there is no VGA signal on machfb. I managed to get IP address assigned to this machine from DHCP server, logged in via ssh and looked at the logs. Looks like X server has problems configuring framebuffer device. So I generated xorg.conf manually with 'X -configure' and it thinks I have 3 cards: Identifier Card0 Driver mach64 BusID PCI:1:2:0 Identifier Card1 Driver fbdev BusID PCI:1:2:0 Identifier Card2 Driver vesa BusID PCI:1:2:0 This looks wrong to me, one of them should be using sunffb driver. And why all three drivers refer to the same BusID? I tried copying this file to /etc/X11/xorg.conf and leaving only Identifier Card1 Driver sunffb BusID PCI:1:2:0 But still can't get X11 running Any ideas? OK changed that to BusID SBUS:/SUNW,ffb@1e,0 and X11 works now. Hi, I was curious as to what prompted you to try SBUS:/SUNW,ffb@1e,0 for the BusID value? Me too Thanks, Dave And the archive mostlike also. Please respect the discussion sequence and reply below the text. Groeten Geert Stappers -- Leven en laten leven signature.asc Description: Digital signature
Re: Problems with X11 on Ultra10
On Sun, 4 May 2014 13:38:15 -0400 David Gosselin d...@appleside.org wrote: Hi, I was curious as to what prompted you to try SBUS:/SUNW,ffb@1e,0 for the BusID value? Thanks, Dave Searched on google for debian on sparc64 and creator3d framebuffer and someone had their xorg.conf with that bus id. Xorg log file also makes references to that. -- To UNSUBSCRIBE, email to debian-alpha-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20140504221208.41a0f3f6c2a955f48943c...@googlemail.com
Re: Problems with X11 on Ultra10
On 03/05/14 03:39 PM, Sad Clouds wrote: Hello, I'm new to Debian and trying it out on Ultra10 which has Creator3D framebuffer. I installed Debian stable and seem to be having some issues with X11 or display manager. The system boots OK and I can see boot messages, but when it goes to start display manager the screen goes black and nothing happens. No windows, no mouse cursor, nothing. Any ideas? Might as well ask about the obvious right away, do you have your monitor hooked up to the onboard video in the bottom left corner (facing the back), or to the 13W3 video connector on the Creator3D? What could be happening is X11 picked the wrong card by default and is only showing it on the opposite connector. If you have a second monitor try hooking one up to the 13W3 and one to the VGA connector. Hayden K. -- To UNSUBSCRIBE, email to debian-alpha-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/536579c1.30...@gmail.com
