Re: Problem with NICs on Amd64 installer
On Wednesday 16 November 2005 17:54, Lennart Sorensen wrote: On Wed, Nov 16, 2005 at 03:48:31PM +, David Goodenough wrote: I tried this but it did not help. In fact it also does not seem to have the driver for the RAID card in it, so I could not even install without the network. Which raid card? I also tried the most recent etch-rc1 ISO, and that fails in the same way. I am confident that the ethernet cable is correctly installed and that the connection to the hub is working as the relevant panel light comes on both in the front of the machine and on the hub. The driver loads apparently correctly, and ifconfig reports a device. dhclient tries to get an address but fails, and if I statically configure the card it accepts the values but then fails to communicate. Which ethernet chip? Anyone have any further ideas? Well what does lspci -n |grep 0200 say for the network card? How about lspci -n |grep 010[14] for the ide/sata/raid cards? Len Sorensen Of course I could not do an lspci with the installer, as it is not present (why, it would be so useful), so I used Knoppix instead. The raid card is: 1044:a511 RAID controller Adaptec (formerly DPT) SmartRAID V Controller rev 1 and the network cards:- 14e4:1640 Broadcom NetXtreme BCM5704. With your driver in exprt mode it correctly identified the cards and the drivers that were needed for them, but said they could not be loaded. David -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: convert .wma to .mp3
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 * On 2005-11-16 19:14 [EMAIL PROTECTED] wrote: : how can I encode .wma to .mp3 with no mplayer ? please get xmms-wma, play the songs with the diskwriter-plugin and finally convert the produced wav-files to whatever you want. lg raphael -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFDfGNNR/faipuTVh4RApzBAJwMZHBww5HnfFf3nHKQIJoAWarUIACgzY1b 8ylI1LsHDaVzJuFrhPfxb2U= =6gum -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
CD ISO Install AMD64
Bonjour, Quelqu'un sait'il ou récupérer l'image ISO qui fonctionne, pour creer un CD de Boot Réseau pour l'installation. Merci. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: CD ISO Install AMD64
[EMAIL PROTECTED] wrote: Bonjour, Quelqu'un sait'il ou récupérer l'image ISO qui fonctionne, pour creer un CD de Boot Réseau pour l'installation. Merci. http://cdimage.debian.org/cdimage/unofficial/sarge-amd64/iso-cd/debian-31r0a-amd64-netinst.iso -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Ip own modem/router ADSL
Am 2005-11-15 09:37:48, schrieb A J Stiles:
If you are lucky, the first hop will be your router's own external IP
address.
If you are unlucky, the first hop will be an unroutable 10.x.y.z address --
this means your ISP is connecting you through a secondary router {mine does
that}. In which case, get someone whose IP address you *do* know to put this
in their cgi-bin:
#!/usr/bin/perl -w
use strict;
my $ip_address = $ENV{REMOTE_ADDR};
print qq|Content-type: text/plain
Your IP address is $ip_address.
|;
exit 0;
Then visit it with a web browser.
And if he has no cgi-bin?
Better:
__( '/home/michelle.konzack/public_html/ip.php' )_
/
| ?php echo $_SERVER['REMOTE_ADDR'] ?
\__
it works on most common free hosting providers.
Greetings
Michelle
--
Linux-User #280138 with the Linux Counter, http://counter.li.org/
Michelle Konzack Apt. 917 ICQ #328449886
50, rue de Soultz MSM LinuxMichi
0033/3/8845235667100 Strasbourg/France IRC #Debian (irc.icq.com)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: convert .wma to .mp3
The easy and efficient way of doing this would be to use a pcm output redirect to the wav file and then use lame to convert it to mp3. I've been doing this method to convert wma files into ogg. worked like a charm. Andrei On Wed, 2005-11-16 at 16:17 +, debianista.deb wrote: hello how can I encode .wma to .mp3 with no mplayer ? please thanks debianista.deb signature.asc Description: This is a digitally signed message part
X86_64 on Shuttle-XPC ST20G5
Hello, debian runs on that machine but suboptimal, here are some notes I send to the manufacturer support: sata support: sata_uli If the raid switch is turned off in the bios, the linux kernel module sata_uli detects the hard disc only after a second load. Only if the bios switch for raid is turned on its possible to boot from sata drive. In both modes it's not possible to detect my Plextor PX-716SA sata dvd-writer. The company ULI offers sata module for older kernels (current is 2.6.14) on their website, but on the need to boot from sata drive the module must be included in the kernel and cannot be loaded afterwards. usb: My Logitech mouse at the usb port flickers, the drivers where constantly loded and and unloaded. At first it seems like a break inside the mouse cable, but I could elimate that, by using that mouse at another computer. Therefore it must be a bug in the usb driver, take a look at the syslog abstract below to see how that makes the use of a mouse at that port impossible. sound: With snd-hda-intel module for the Realtech ALC 880 sound component of the ST20G5, only the Line out exit at the back is usable. Headphones and Microphone ports are unusable. acpi: The kernel could only start with acpi and apic off, otherwise the kernel stops at boot. Kernel command line: root=/dev/sda2 bootkbd=qwertz/de acpi=off noapic ro console=tty0 ATI XPress 200 graphics: Currently the usage of X is only possible with the standard vesa module of the Xorg 6.8.2 server. If I use the ati fglrx driver the monitor flickers on every redraw, a multiple horizontal movement of the contents on the Monitor on every update of contents inside a window. Hardware: ST20G5 BIOS: update on ft20s016 sata-hdd: Maxtor 6L200MD sata-dvd: Plextor Px-716sa (not useable) CPU: AMD Athlon(tm) 64 X2 dual core Processor 3800+ stepping 02 RAM: 2Gbyte -- 2x 1024MB Infineon DDR400 CL3 Kbd: Microsoft Natural Ergonomic 4000 Mouse: Logitech MouseMan Wheel at USB (not useable) Monitor: Philips 180P2 at DVI port Chipset: ULI 1573 Software: Linux 2.6.14 Debian Etch Xorg server 6.8.2 may you have Ideas to get rid of these problems greetings thomas Bootdata ok (command line is root=/dev/sda2 bootkbd=qwertz/de acpi=off noapic ro console=tty0) Linux version 2.6.14-1.06-st20g5 ([EMAIL PROTECTED]) (gcc version 4.0.2 (Debian 4.0.2-2)) #1 SMP PREEMPT Sat Nov 12 16:49:18 CET 2005 BIOS-provided physical RAM map: BIOS-e820: - 0009c000 (usable) BIOS-e820: 0009c000 - 000a (reserved) BIOS-e820: 000f - 0010 (reserved) BIOS-e820: 0010 - 7bef (usable) BIOS-e820: 7bef - 7bef3000 (ACPI NVS) BIOS-e820: 7bef3000 - 7bf0 (ACPI data) BIOS-e820: e000 - f000 (reserved) BIOS-e820: fec0 - 0001 (reserved) Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase Limit 7bef Using 20 for the hash shift. Max adder is 7bef Using node hash shift of 20 Bootmem setup node 0 -7bef On node 0 totalpages: 507532 DMA zone: 3996 pages, LIFO batch:1 Normal zone: 503536 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM0 6Product ID: PROD 6APIC at: 0xFEE0 Processor #0 6:8 APIC version 17 Processor #1 6:8 APIC version 17 I/O APIC #2 Version 17 at 0xFEC0. Setting APIC routing to flat Processors: 2 Allocating PCI resources starting at 8000 (gap: 7bf0:6410) Checking aperture... CPU 0: aperture @ e57a00 size 32 MB Aperture from northbridge cpu 0 too small (32 MB) No AGP bridge found Built 1 zonelists Kernel command line: root=/dev/sda2 bootkbd=qwertz/de acpi=off noapic ro console=tty0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 2009.723 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 1994880k/2030528k available (2602k kernel code, 35248k reserved, 915k data, 236k init) Calibrating delay using timer specific routine.. 4033.59 BogoMIPS (lpj=2016795) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(2) - Node 0 - Core 0 mtrr: v2.0 (20020519) Using local APIC timer interrupts. Detected 12.560 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 spurious 8259A interrupt: IRQ7. Calibrating delay using timer specific routine.. 4017.09
Re: convert .wma to .mp3
all right thanks a lot dude :D my wma is already on mp3.On 11/17/05, Andrei Mikhailovsky [EMAIL PROTECTED] wrote: The easy and efficient way of doing this would be to use a pcm outputredirect to the wav file and then use lame to convert it to mp3. I've been doing this method to convert wma files into ogg. worked like acharm.AndreiOn Wed, 2005-11-16 at 16:17 +, debianista.deb wrote: hello how can I encode .wma to .mp3 with no mplayer ? please thanks debianista.deb-BEGIN PGP SIGNATURE-Version: GnuPG v1.4.2 (GNU/Linux)iD8DBQBDfILeqBT/4Cs0ON4RAlX0AJ9TSWcfv7uB/c9NpmyKvMD/cZSkXQCggfmGANjJWV9qmeHfT38j29fGpDY= =QiHR-END PGP SIGNATURE-
Re: How to install nvidia driver
On Sunday 13 November 2005 00:30, Alan Ianson wrote: On Sat November 12 2005 04:01 pm, Stefan Salewski wrote: Hello, next week I will try to install debian-amd64 on a new computer with a nvidia graphic card (7800GTX). I don't really like these closed source drivers from ati and nvidia, but I think I have to use it. I have just done some google search about debian and nvidia drivers. Some people recommend not to install the nvidia way, but to use the debian way. I found only one detailed explanation about how to do it: http://home.comcast.net/~andrex/Debian-nVidia/installation.html This tutorial is very nice, but I am not sure if it is an official debian recommendation and if it will work for AMD64 too. Can you comment on this? Are there other tutorials around? Will I have only textmode available until I install the nvidia driver, or will the X-Org driver give me an unaccelerated graphical display? You can use the nv driver in the mean time. That's what I have been using here and it works fine. I don't know for sure what the difference is but I think if you want 3D acceleration (for gaming) you may need the nvidia drivers. I've been trying to get them installed too, so I'll be watching this thread. The difference, at least to my eyes, is much better font rendering and a generally over all shaper image with the nvidia drivers compared to nv. I didn't realize that a driver could make so much difference but switching to nvidia after using nv for a while was like getting a new monitor. Having said that I can't get the nvidia drivers to work with 2.6.14 but they work fine with 2.6.12. Graham -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: How to install nvidia driver
Graham Smith wrote: On Sunday 13 November 2005 00:30, Alan Ianson wrote: On Sat November 12 2005 04:01 pm, Stefan Salewski wrote: Hello, next week I will try to install debian-amd64 on a new computer with a nvidia graphic card (7800GTX). I don't really like these closed source drivers from ati and nvidia, but I think I have to use it. I have just done some google search about debian and nvidia drivers. Some people recommend not to install the nvidia way, but to use the debian way. I found only one detailed explanation about how to do it: http://home.comcast.net/~andrex/Debian-nVidia/installation.html This tutorial is very nice, but I am not sure if it is an official debian recommendation and if it will work for AMD64 too. Can you comment on this? Are there other tutorials around? Will I have only textmode available until I install the nvidia driver, or will the X-Org driver give me an unaccelerated graphical display? You can use the nv driver in the mean time. That's what I have been using here and it works fine. I don't know for sure what the difference is but I think if you want 3D acceleration (for gaming) you may need the nvidia drivers. I've been trying to get them installed too, so I'll be watching this thread. The difference, at least to my eyes, is much better font rendering and a generally over all shaper image with the nvidia drivers compared to nv. I didn't realize that a driver could make so much difference but switching to nvidia after using nv for a while was like getting a new monitor. Having said that I can't get the nvidia drivers to work with 2.6.14 but they work fine with 2.6.12. Graham 2.6.14 requires newer drivers than those in sarge or sid: * add deb-src http://mirror.ox.ac.uk/debian experimental main contrib non-free to /etc/apt/sources.list * go to a new empty folder * apt-get update * apt-get source -t experimental nvidia-glx * apt-get build-dep nvidia-glx * cd nvidia* * dpkg-buildpackage * cd .. * dpkg -i nvidia-kernel-source* * apt-get install module-assistant build-essential * cat /proc/version - make sure your kernel's gcc is installed (e.g. gcc-3.4 must be installed if your kernel was compiled with gcc 3.4.x) * wget ftp://ftp.debian.org/debian/pool/contrib/n/nvidia-kernel-common/nvidia-kernel-common_20051028+1_all.deb; * dpkg -i nvidia-kernel-common* * m-a a-i nvidia * dpkg -i nvidia-glx_* * dpkg -i nvidia-glx-i* * dpkg -i nvidia-set* Change your X server as per usual. I think some people make their generated packages available on the web. --Jo Shields -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Problems with mozilla-browser 1.7.12-1 in testing
Using testing, mozilla-browser 1.7.12-1 is unusable for me: It crashes after a half-dozen clicks from a web browser (if four clicks doesn't kill it, usually a back-button or two does). Reverting to 1.7.8-1 restores its health. I've tried removing the .mozilla folder, but it doesn't help. Does the amd64 testing mozilla-browser 1.7.12-1 work well for anyone? I'm using a variety of self-compiled recent kernels (including the binary nvidia module), but everything else is rock-solid. If others say that this is working for them, then that will give me some information. Thanks, --Pete -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Problems with mozilla-browser 1.7.12-1 in testing
Hi Pete, On Thu, Nov 17, 2005 at 01:48:34PM -0600, Pete Harlan wrote: Using testing, mozilla-browser 1.7.12-1 is unusable for me: It crashes after a half-dozen clicks from a web browser (if four clicks doesn't kill it, usually a back-button or two does). Mine (1.7.12-1 on unstable) is also crashing frequently. Mostly on pressing the back button, but sometimes also on other occasions. All the best, Jochen -- http://seehuhn.de/ signature.asc Description: Digital signature
Re: RAID
That (nvraid) is definitely software raid. Every built-in RAID controller on *consumer grade* hardware I have ever seen is software raid, including controllers/chips by silicon image, marvel, broadcom and nvidia controllers. In such a case, linux software raid is definitely the way to go. NPM On Nov 16, 2005, at 1:28 PM, lordSauron wrote: I have a ECS Elitegroup nForce 3-A. I'll google for it to see if the nvRaid is (s||h)w but that's the hardware. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: How to install nvidia driver
Hi! I can't do: * dpkg -i nvidia-set* Because I didn't get any nvidia-set*. Is this a problem?On 11/17/05, Jo Shields [EMAIL PROTECTED] wrote: Graham Smith wrote:On Sunday 13 November 2005 00:30, Alan Ianson wrote:On Sat November 12 2005 04:01 pm, Stefan Salewski wrote:Hello, next week I will try to install debian-amd64 on a new computerwith a nvidia graphic card (7800GTX).I don't really like these closed source drivers from ati and nvidia, but I think I have to use it.I have just done some google search about debian and nvidiadrivers. Some people recommend not to install the nvidia way, but to use the debian way. I found only one detailed explanationabout how to do it: http://home.comcast.net/~andrex/Debian-nVidia/installation.htmlThis tutorial is very nice, but I am not sure if it is anofficial debian recommendation and if it will work for AMD64 too.Can you comment on this? Are there other tutorials around? Will Ihave only textmode available until I install the nvidia driver,or will the X-Org driver give mean unaccelerated graphical display?You can use the nv driver in the mean time. That's what I have been usinghere and it works fine. I don't know for sure what the difference is but I think if you want 3D acceleration (for gaming) you may need the nvidiadrivers. I've been trying to get them installed too, so I'll be watchingthis thread. The difference, at least to my eyes, is much better font rendering and agenerally over all shaper image with the nvidia drivers compared to nv. Ididn't realize that a driver could make so much difference but switching to nvidia after using nv for a while was like getting a new monitor.Having said that I can't get the nvidia drivers to work with 2.6.14 but theywork fine with 2.6.12.Graham 2.6.14 requires newer drivers than those in sarge or sid:* add deb-src http://mirror.ox.ac.uk/debian experimental main contribnon-free to /etc/apt/sources.list * go to a new empty folder* apt-get update* apt-get source -t experimental nvidia-glx* apt-get build-dep nvidia-glx* cd nvidia** dpkg-buildpackage * cd ..* dpkg -i nvidia-kernel-source** apt-get install module-assistant build-essential* cat /proc/version - make sure your kernel's gcc is installed (e.g. gcc-3.4 must be installed if your kernel was compiled with gcc 3.4.x)* wgetftp://ftp.debian.org/debian/pool/contrib/n/nvidia-kernel-common/nvidia-kernel-common_20051028+1_all.deb * dpkg -i nvidia-kernel-common** m-a a-i nvidia* dpkg -i nvidia-glx_** dpkg -i nvidia-glx-i** dpkg -i nvidia-set*Change your X server as per usual. I think some people make their generated packages available on the web.--Jo Shields--To UNSUBSCRIBE, email to [EMAIL PROTECTED]with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
WLAN on Acer Aspire 1513LMi or WG511
Hi All, I've a Netgear WG511 (The v1 made in China) on a PCMCIA slot and an AMD64-based Laptop running 64bit-Debian: I needed to use that card to access to my WLAN in Linux, too. I've read about prism54 and ndiswrapper, but both seems to be full working only if running 32-bit drivers; in fact it'd seem no manufacturer releases 64-bit version of its driver. In alternative, I've the integrated WiFi Lan - it should be a 54 MBit-WLAN- Chip: Broadcom Corporation BCM94306 802.11g (rev 03) - which works fine under Windows (XP Home Edition 32bit). Thanks in advance, Regards, Max
Re: How to install nvidia driver
Tony Power wrote: Hi! I can't do: * dpkg -i nvidia-set* Because I didn't get any nvidia-set*. Is this a problem? On 11/17/05, *Jo Shields* [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: Graham Smith wrote: On Sunday 13 November 2005 00:30, Alan Ianson wrote: On Sat November 12 2005 04:01 pm, Stefan Salewski wrote: Hello, next week I will try to install debian-amd64 on a new computer with a nvidia graphic card (7800GTX). I don't really like these closed source drivers from ati and nvidia, but I think I have to use it. I have just done some google search about debian and nvidia drivers. Some people recommend not to install the nvidia way, but to use the debian way. I found only one detailed explanation about how to do it: http://home.comcast.net/~andrex/Debian-nVidia/installation.html http://home.comcast.net/%7Eandrex/Debian-nVidia/installation.html This tutorial is very nice, but I am not sure if it is an official debian recommendation and if it will work for AMD64 too. Can you comment on this? Are there other tutorials around? Will I have only textmode available until I install the nvidia driver, or will the X-Org driver give me an unaccelerated graphical display? You can use the nv driver in the mean time. That's what I have been using here and it works fine. I don't know for sure what the difference is but I think if you want 3D acceleration (for gaming) you may need the nvidia drivers. I've been trying to get them installed too, so I'll be watching this thread. The difference, at least to my eyes, is much better font rendering and a generally over all shaper image with the nvidia drivers compared to nv. I didn't realize that a driver could make so much difference but switching to nvidia after using nv for a while was like getting a new monitor. Having said that I can't get the nvidia drivers to work with 2.6.14 but they work fine with 2.6.12. Graham 2.6.14 requires newer drivers than those in sarge or sid: * add deb-src http://mirror.ox.ac.uk/debian experimental main contrib non-free to /etc/apt/sources.list * go to a new empty folder * apt-get update * apt-get source -t experimental nvidia-glx * apt-get build-dep nvidia-glx * cd nvidia* * dpkg-buildpackage * cd .. * dpkg -i nvidia-kernel-source* * apt-get install module-assistant build-essential * cat /proc/version - make sure your kernel's gcc is installed (e.g. gcc-3.4 must be installed if your kernel was compiled with gcc 3.4.x) * wget ftp://ftp.debian.org/debian/pool/contrib/n/nvidia-kernel-common/nvidia-kernel-common_20051028+1_all.deb; ftp://ftp.debian.org/debian/pool/contrib/n/nvidia-kernel-common/nvidia-kernel-common_20051028+1_all.deb%22 * dpkg -i nvidia-kernel-common* * m-a a-i nvidia * dpkg -i nvidia-glx_* * dpkg -i nvidia-glx-i* * dpkg -i nvidia-set* Change your X server as per usual. I think some people make their generated packages available on the web. --Jo Shields -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] My mistake. aptitude install nvidia-settings should be fine. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: WLAN on Acer Aspire 1513LMi or WG511
Hi, I've a Netgear WG511 (The v1 made in China) on a PCMCIA slot and an AMD64-based Laptop running 64bit-Debian: I needed to use that card to access to my WLAN in Linux, too. I've read about prism54 and ndiswrapper, but both seems to be full working only if running 32-bit drivers; in fact it'd seem no manufacturer releases 64-bit version of its driver. this might help you a little: (?) http://forums.gentoo.org/viewtopic.php?t=177446 sigi. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: WLAN on Acer Aspire 1513LMi or WG511
On Thursday 17 November 2005 15:58, sigi wrote: | I've a Netgear WG511 (The v1 made in China) on a PCMCIA slot and an | AMD64-based Laptop running 64bit-Debian: I needed to use that card to | access to my WLAN in Linux, too. I've read about prism54 and ndiswrapper, | but both seems to be full working only if running 32-bit drivers; in fact | it'd seem no manufacturer releases 64-bit version of its driver. so you've tried the prism54 driver? I also have a netgear wg511 (not sure the version, but can check into it soon) that works perfectly with the prism54 drivers and 64bit debian. -Ted -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
