chroot
Hi, today I tried to install a chroot on my amd64-machine, but it failed... I did it, like described here: https://alioth.debian.org/docman/view.php/30192/21/debian-amd64-howto.html#id271960 But debootstrap --arch i386 sid /var/chroot/sid-ia32 http://ftp.debian.org/debian/ gives the errormessage: E: Couldn't download base-config ignoring this and trying: chroot /var/chroot/sid-ia32 gives this: chroot: cannot run command `/bin/bash': No such file or directory So, where do I get the base-config files? Are they not available anymore? Or are they only temporary not available? sigi. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: chroot
sigi <[EMAIL PROTECTED]> writes: > Hi, > > today I tried to install a chroot on my amd64-machine, but it failed... > > I did it, like described here: > https://alioth.debian.org/docman/view.php/30192/21/debian-amd64-howto.html#id271960 > > But > debootstrap --arch i386 sid /var/chroot/sid-ia32 http://ftp.debian.org/debian/ Try it with sarge and then upgrade to side afterwards. MfG Goswin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: chroot
> > I did it, like described here: > > https://alioth.debian.org/docman/view.php/30192/21/debian-amd64-howto.html#id271960 > > > > But > > debootstrap --arch i386 sid /var/chroot/sid-ia32 > > http://ftp.debian.org/debian/ > > Try it with sarge and then upgrade to side afterwards. OK, thanks for the help, with sarge it worked... But how do I now install something via apt-get? It only shows: apt-get: error while loading shared libraries: libstdc++.so.6: cannot open shared object file: No such file or directory Do I have to download libstdc++ manually? Or do I have to set a link somewhere for that? It's all a little bit confusing to me with this chroot... sigi. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: chroot
> Do I have to download libstdc++ manually? Or do I have to set a link > somewhere for that? It's all a little bit confusing to me with this > chroot... Or can I just use your solution with the amd64-archive in any way? I only wanted to use the chroot for openoffice. I updated my system to xorg7 some days ago, and since then I can't install your openoffice.org-package, because it seems to be depending on xfree86-common. But if I try to install this, apt says, that it conflicts with x11-common7... Is there anything I can do about this? sigi. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
VMware + Perl failure.
Hi all, I installed the free Server on Debian AMD64. This went without any problems. The problem begins when I start "vmware &". The VMware Server Console (e.x.p build-22874) pops-up and show me a "Connect to Host" dialog. When I do a connect to localhost I get an error message: "The local VMware Server is not installed, or is not currently running. Make sure that the server is properly installed and try again." I think it has to do with Perl (/usr/lib/vmware/perl5/site_perl/5.005/i386-linux) and this AMD64 machine. I read somewhere to install some Perl 32 bit stuff, just like ia32-libs, but I can't find which package this could be. I posted on the VMware forum but I am not getting an answer. I followed the instructions on this site: http://blog.robinz.info/archives/2006/03/17/install-vmware-server-on-debian-amd64em64t/ It is installed and running: root 10482 0.0 0.0 1352 160 pts/3 S 20:56 0:00 /usr/bin/vmnet-bridge -d /var/run/vmnet-bridge-0.pid /dev/vmnet0 eth0 /tmp/vmware/ui-.log Apr 30 20:18:15: vmui| Log for VMware Server pid=7833 version=e.x.p build=build-22874 option=BETA Apr 30 20:18:16: vmui| Gdk: locale not supported by Xlib Apr 30 20:18:16: vmui| Gdk: can not set locale modifiers Apr 30 20:18:16: vmui| Using log file /tmp/vmware-janux/ui-7833.log Apr 30 20:18:16: vmui| HAL04LoadHALLibraries: Could not dlopen libhal.so.0. Apr 30 20:18:16: vmui| HAL05LoadHALLibraries: Could not dlopen libhal.so.1. Apr 30 20:18:18: vmui| SMBIOS: can't open /dev/mem Apr 30 20:18:18: vmui| VmhsHostInfoPopulateSystem: Could not get information from smbios to populate VMDB. Apr 30 20:18:18: vmui| HOSTINFO: Seeing AMD CPU, numCoresPerCPU 1 numThreadsPerCore 1. Apr 30 20:18:18: vmui| HOSTINFO: This machine has 1 physical CPUS, 1 total cores, and 1 logical CPUs. /var/log/vmware/vmware-ccagent.log Apr 30 20:18:22: app| Log for VMware Server pid=7840 version=e.x.p build=build-22874 option=BETA Apr 30 20:18:22: app| Program: /usr/sbin/vmware-serverd Apr 30 20:18:22: app| CWD: /var/log/vmware Apr 30 20:18:22: app| Init script: /usr/lib/vmware/serverd/init.pl Apr 30 20:18:23: app| Perl error 2 during parsing of files. Apr 30 20:18:23: app| eval error: Can't load '/usr/lib/vmware/perl5/site_perl/5.005/i386-linux/auto/VMware/HConfig/HConfig.so' for module VMware::HConfig: /usr/lib/vmware/perl5/site_perl/5.005/i386-linux/auto/VMware/HConfig/HConfig.so: invalid ELF header at /usr/lib/vmware/perl5/site_perl/5.005/DynaLoader.pm line 169. Apr 30 20:18:23: app| Apr 30 20:18:23: app| at /usr/lib/vmware/perl5/site_perl/5.005/VMware/HConfig/CommonConstant.pm line 18 Apr 30 20:18:23: app| BEGIN failed--compilation aborted at /usr/lib/vmware/perl5/site_perl/5.005/VMware/VMServerd.pm line 20. Apr 30 20:18:23: app| BEGIN failed--compilation aborted Apr 30 20:18:23: app| VMServerd Panic: Could not initialize Perl script handler. Apr 30 20:18:23: app| Apr 30 20:18:23: app| Backtrace: Apr 30 20:18:23: app| Backtrace[0] 0xa218 eip 0x80cdef1 Apr 30 20:18:23: app| Backtrace[1] 0xc298 eip 0x8078ce5 Thank in advance, Jan.
AMD64
I'm working at getting a Tyan S2877 board up and going using the net-install-cd of unofficial sarge AMD64. Several problems - first it would not recognize my SATA CD/DVD plextor drive (px-755SA) - not a big deal - so I put in an older IDE drive for now. Next, it sees the broadcom Network chips - but they fail to work. After setting up a raid configuration it fails to boot. I'm wondering if I should just give up on Sarge or work these out one at a time? This board has: dual Processors • Supports two AMD Opteron™ 2xx processors Two onboard 4-phase VRMs • µPGA 940-pin socket Chipset • nVIDIA CrushK8-04 Professional • Winbond W83627HF Super I/O • Analog Devices (1) ADT7468 Hardware Monitoring Integrated LAN Controllers • One Broadcom BCM5705 GbE LAN (G2NR) - One RJ-45 LAN connector with LEDs • One Marvell 88E GbE PHY - One RJ-45 LAN connectors with LEDs Karl Schmidt EMail [EMAIL PROTECTED] Transtronics, Inc. WEB http://xtronics.com 3209 West 9th StreetPh (785) 841-3089 Lawrence, KS 66049 FAX (785) 841-0434 A patent provides one a license to enrich his lawyer. -kps -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Help... messed around with insserv
Hello, do you know the programm insserv. It should add startup links for a program to the different runlevels. The system on which it is use should be lsb compabile. I thought that debian is not lsb compatible, but because the programm was available via apt, I used it (OK it is my own fault, not to talk about this...) But I got a lot of messages like this: insserv: warning: script 'bootclean' missing LSB tags insserv: warning: script 'bootclean' missing override too No, the most obvious problem I have is that my network is not configured by dhcp anymore. I have to type dhcp eth1 - and the the card is set up properly. There are a few other services which seems to be trashed by insserv. E.g. discover is startet up two time. I do not know anything about how to organize runlevels. Is there a way to get this thing right, or do I have to reinstall the system? Thank you advance. W. Mader pgpILaBmlCsyX.pgp Description: PGP signature
Re: AMD64
Karl Schmidt wrote: I'm working at getting a Tyan S2877 board up and going using the net-install-cd of unofficial sarge AMD64. Several problems - first it would not recognize my SATA CD/DVD plextor drive (px-755SA) - not a big deal - so I put in an older IDE drive for now. Next, it sees the broadcom Network chips - but they fail to work. After setting up a raid configuration it fails to boot. I'm wondering if I should just give up on Sarge or work these out one at a time? This board has: dual Processors • Supports two AMD Opteron™ 2xx processors Two onboard 4-phase VRMs • µPGA 940-pin socket Chipset • nVIDIA CrushK8-04 Professional • Winbond W83627HF Super I/O • Analog Devices (1) ADT7468 Hardware Monitoring Integrated LAN Controllers • One Broadcom BCM5705 GbE LAN (G2NR) - One RJ-45 LAN connector with LEDs • One Marvell 88E GbE PHY - One RJ-45 LAN connectors with LEDs I see no RAID hardware in the above. are you trying to configure MD? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: AMD64
Jo Shields wrote: Karl Schmidt wrote: I'm working at getting a Tyan S2877 board up and going using the net-install-cd of unofficial sarge AMD64. Several problems - first it would not recognize my SATA CD/DVD plextor drive (px-755SA) - not a big deal - so I put in an older IDE drive for now. Next, it sees the broadcom Network chips - but they fail to work. After setting up a raid configuration it fails to boot. I'm wondering if I should just give up on Sarge or work these out one at a time? This board has: dual Processors • Supports two AMD Opteron™ 2xx processors Two onboard 4-phase VRMs • µPGA 940-pin socket Chipset • nVIDIA CrushK8-04 Professional • Winbond W83627HF Super I/O • Analog Devices (1) ADT7468 Hardware Monitoring Integrated LAN Controllers • One Broadcom BCM5705 GbE LAN (G2NR) - One RJ-45 LAN connector with LEDs • One Marvell 88E GbE PHY - One RJ-45 LAN connectors with LEDs I see no RAID hardware in the above. are you trying to configure MD? Yes - I'm using software raid - MD -- !!!>> INCLUDE ALL TEXT IN TECHNICAL SUPPORT EMAIL REPLIES!!! Karl Schmidt EMail [EMAIL PROTECTED] Transtronics, Inc. WEB http://xtronics.com 3209 West 9th StreetPh (785) 841-3089 Lawrence, KS 66049 FAX (785) 841-0434 If man's brain was simple enough for us to understand, we would be to simple to understand it. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Once again: OOo2
Hi, since I had some problems, setting up my chroot and get running again Goswin von Brederlows openoffice-packages with amd64-archive, I found this note on http://openoffice.debian.net/ : "News from the OpenOffice.org amd64 porting. It is "Nothing of production quality yet, but should be usable now". (please wait for 2.0.2-3 or 2.0.3-1)" The 'should be usable now' passage made me hopeful and I installed the experimental OOo-2.0.2-packages from http://people.debian.org/~rene/openoffice.org/2.0.2/experimental And I only wanted to mention here, that they seem to work! Until now OO-writer only crashed after I tested the File > Wizards-buttons. But, it looks nice, and seems almost working! Thanks a lot out there for doing this porting...! :) sigi. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: chroot
sigi <[EMAIL PROTECTED]> writes: >> > I did it, like described here: >> > https://alioth.debian.org/docman/view.php/30192/21/debian-amd64-howto.html#id271960 >> > >> > But >> > debootstrap --arch i386 sid /var/chroot/sid-ia32 >> > http://ftp.debian.org/debian/ >> >> Try it with sarge and then upgrade to side afterwards. > > OK, thanks for the help, with sarge it worked... But how do I now > install something via apt-get? It only shows: > > > apt-get: error while loading shared libraries: libstdc++.so.6: cannot > open shared object file: No such file or directory > > > Do I have to download libstdc++ manually? Or do I have to set a link > somewhere for that? It's all a little bit confusing to me with this > chroot... > > sigi. Normaly (c)debootstrap installs the required libs for apt. cdebootstrap even uses apt-get inside the chroot itself. Not sure what went wrong there. The only thing that changed recently is the Sarge R2 release but I would be surprised if apt changed its depends there. So, unless you want to debug this, just fetch the proper deb and dpkg -i it. MfG Goswin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: chroot
sigi <[EMAIL PROTECTED]> writes: >> Do I have to download libstdc++ manually? Or do I have to set a link >> somewhere for that? It's all a little bit confusing to me with this >> chroot... > > Or can I just use your solution with the amd64-archive in any way? I > only wanted to use the chroot for openoffice. > > I updated my system to xorg7 some days ago, and since then I can't > install your openoffice.org-package, because it seems to be depending on > xfree86-common. But if I try to install this, apt says, that it > conflicts with x11-common7... Is there anything I can do about this? > > sigi. There are a ton of changes in sid that amd64-archive isn't aware of and OOo probably needs to be recompiled for it too. I'm working on an update but I'm also waiting for things to settle down a bit as well. MfG Goswin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Help... messed around with insserv
Wolfgang Mader schrieb: Hello, do you know the programm insserv. It should add startup links for a program to the different runlevels. The system on which it is use should be lsb compabile. I thought that debian is not lsb compatible, but because the programm was available via apt, I used it (OK it is my own fault, not to talk about this...) Can you use update-rc.d? ___ Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
