Broadcom bcm43xx problems
Hello all, I am looking for two solutions with wireless cards. I have a Broadcom bcm4318 and a realtek rtl8169. - How can I force to use eth0 for the wlan-card, and eth1 for the hardwired-card ? I use udev, so sometimes theezh0 and eth1 changes at starting. Hardwired shall have a fixed IP, wlan shall get the ip with dhcp. - How can I force to use 11MBit on the wlan-card. The wlan-card originally always is using 54MBit. This my entry in /etc/network/interfaces, but this does not work: # The primary network interface auto eth0 eth1 iface eth0 inet dhcp wireless-essid myssid wireless-channel 6 wireless-key X wireless-mode managed wireless-rate 11M--- This should change the rate iface eth1 inet static address xxx.xxx.xxx.y netmask yyy.yyy.yyy.z network xxx.xxx.xxx.0 broadcast xxx.xxx.xxx.255 gateway xxx.xxx.xxx.x Best regards Hans -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Broadcom bcm43xx problems
- How can I force to use eth0 for the wlan-card, and eth1 for the hardwired-card ? I use udev, so sometimes theezh0 and eth1 changes at starting. Hardwired shall have a fixed IP, wlan shall get the ip with dhcp. i think something like this was discussed earlier... this won't allow you to have it eth0 and eth1, however this shouldn't matter: http://www.debianhelp.co.uk/udev.htm regards, -- Lubos [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Broadcom bcm43xx problems
On Fri, 2006-02-24 at 17:02 +0100, Hans wrote: Hello all, I am looking for two solutions with wireless cards. I have a Broadcom bcm4318 and a realtek rtl8169. - How can I force to use eth0 for the wlan-card, and eth1 for the hardwired-card ? I use udev, so sometimes theezh0 and eth1 changes at starting. Hardwired shall have a fixed IP, wlan shall get the ip with dhcp. Use ifrename for resolve your problem! - How can I force to use 11MBit on the wlan-card. The wlan-card originally always is using 54MBit. This my entry in /etc/network/interfaces, but this does not work: # The primary network interface auto eth0 eth1 iface eth0 inet dhcp wireless-essid myssid wireless-channel 6 wireless-key X wireless-mode managed wireless-rate 11M--- This should change the rate iface eth1 inet static address xxx.xxx.xxx.y netmask yyy.yyy.yyy.z network xxx.xxx.xxx.0 broadcast xxx.xxx.xxx.255 gateway xxx.xxx.xxx.x Best regards Hans -- .''`. ** Debian GNU/Linux ** | Francesco Cecconi ' |BrAnD| ' : :' : The Universal O.S.| [EMAIL PROTECTED] `. `'` | GPG Key ID: 11F6E468 `-| JID [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part
