Re: Bug#314988: Still a problem?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Mon, Oct 31, 2005 at 08:33:40AM -0500, Adam C Powell IV wrote: > On Fri, 2005-10-28 at 13:58 -0700, Steve Langasek wrote: > > On Fri, Oct 28, 2005 at 09:59:34PM +0200, Artur R. Czechowski wrote: > > > On Fri, Oct 28, 2005 at 09:55:25PM +0200, Leopold Palomo Avellaneda wrote: > > > > I did a build-deps and and dpkg-buildpackage to make sure that I had > > > > all the > > > > build depens, but it seems as Ted said and I confirm that I needs the > > > > nvidia-glx-dev. > > > The Question is: why the package needs nvidia-glx-dev on amd64 and on > > > other > > > platforms it builds succesfully without nvidia-glx-dev? > > Because of a longstanding bug in the nvidia lib package which creates a > > broken .so symlink when it's installed without nvidia-glx-dev as well. > Is this the same issue as in 272438? Yes, that's the same bug. > So should this be reassigned to nvidia-glx-dev? Uh, the build issue doesn't seem to have much to do with the reason for this bug report. - -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. [EMAIL PROTECTED] http://www.debian.org/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFDZtvdKN6ufymYLloRAkL+AJ9XxSh2Pd5qRESx+/gRD98huTEyyQCgqzSq 0naitiNPEL10yjWAVOMUZhY= =9INz -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Bug#314988: Still a problem?
On Fri, 2005-10-28 at 13:58 -0700, Steve Langasek wrote: > On Fri, Oct 28, 2005 at 09:59:34PM +0200, Artur R. Czechowski wrote: > > On Fri, Oct 28, 2005 at 09:55:25PM +0200, Leopold Palomo Avellaneda wrote: > > > I did a build-deps and and dpkg-buildpackage to make sure that I had all > > > the > > > build depens, but it seems as Ted said and I confirm that I needs the > > > nvidia-glx-dev. > > The Question is: why the package needs nvidia-glx-dev on amd64 and on other > > platforms it builds succesfully without nvidia-glx-dev? > > Because of a longstanding bug in the nvidia lib package which creates a > broken .so symlink when it's installed without nvidia-glx-dev as well. So should this be reassigned to nvidia-glx-dev? Is this the same issue as in 272438? -Adam -- GPG fingerprint: D54D 1AEE B11C CE9B A02B C5DD 526F 01E8 564E E4B6 Welcome to the best software in the world today cafe! http://www.take6.com/albums/greatesthits.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Bug#314988: Still a problem?
On Fri, Oct 28, 2005 at 09:59:34PM +0200, Artur R. Czechowski wrote: > On Fri, Oct 28, 2005 at 09:55:25PM +0200, Leopold Palomo Avellaneda wrote: > > I did a build-deps and and dpkg-buildpackage to make sure that I had all > > the > > build depens, but it seems as Ted said and I confirm that I needs the > > nvidia-glx-dev. > The Question is: why the package needs nvidia-glx-dev on amd64 and on other > platforms it builds succesfully without nvidia-glx-dev? Because of a longstanding bug in the nvidia lib package which creates a broken .so symlink when it's installed without nvidia-glx-dev as well. -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. [EMAIL PROTECTED] http://www.debian.org/ signature.asc Description: Digital signature
Re: Bug#314988: Still a problem?
On Fri, Oct 28, 2005 at 01:14:27PM -0700, Ted Kisner wrote: > On Friday 28 October 2005 13:02, Leopold Palomo Avellaneda wrote: > > > The Question is: why the package needs nvidia-glx-dev on amd64 and on > > > other platforms it builds succesfully without nvidia-glx-dev? > I think it's because I happen to be using the nvidia X driver and GL > libraries... I don't thinks so. I've just compiled it on amd64 without nvidia packages. Instead of it I installed texinfo. Regards Artur -- "ja to mam żonę, nie muszę lubić seksu" /Sunde/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Bug#314988: Still a problem?
On Friday 28 October 2005 13:02, Leopold Palomo Avellaneda wrote: > > The Question is: why the package needs nvidia-glx-dev on amd64 and on > > other platforms it builds succesfully without nvidia-glx-dev? I think it's because I happen to be using the nvidia X driver and GL libraries... -Ted -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Bug#314988: Still a problem?
A Divendres 28 Octubre 2005 21:59, Artur R. Czechowski va escriure: > On Fri, Oct 28, 2005 at 09:55:25PM +0200, Leopold Palomo Avellaneda wrote: > > I did a build-deps and and dpkg-buildpackage to make sure that I had all > > the build depens, but it seems as Ted said and I confirm that I needs the > > nvidia-glx-dev. > > The Question is: why the package needs nvidia-glx-dev on amd64 and on other > platforms it builds succesfully without nvidia-glx-dev? > good question!!! I thought the same -- Linux User 152692 Catalonia pgppH1lXpsKm5.pgp Description: PGP signature
Re: Bug#314988: Still a problem?
On Fri, Oct 28, 2005 at 09:55:25PM +0200, Leopold Palomo Avellaneda wrote: > I did a build-deps and and dpkg-buildpackage to make sure that I had all the > build depens, but it seems as Ted said and I confirm that I needs the > nvidia-glx-dev. The Question is: why the package needs nvidia-glx-dev on amd64 and on other platforms it builds succesfully without nvidia-glx-dev? Regards Artur -- zjadłam ruskie i barszcz ukraiński. ciekawe czy od tego dostanę automatycznie złotych zębów /majaka/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Bug#314988: Still a problem?
I did a build-deps and and dpkg-buildpackage to make sure that I had all the build depens, but it seems as Ted said and I confirm that I needs the nvidia-glx-dev. I have built the package and installed with the box updated today. I have run again the geomview and it crash in the same place :-( [EMAIL PROTECTED]:~/linux/debian/packages-build$ su -c "dpkg -i geomview_1.8.1-9_amd64.deb" Password: (S'està llegint la base de dades ... hi ha 157130 fitxers i directoris instal·lats actualment.) S'està preparant per a reemplaçar geomview 1.8.1-9 (fent servir geomview_1.8.1-9_amd64.deb) ... S'està desempaquetant el reemplaçament de geomview ... S'està configurant geomview (1.8.1-9) ... [EMAIL PROTECTED]:~/linux/debian/packages-build$ geomview InstCreate: Undefined option: 7309680 Error <1>: RefDecr: ref 6765e0 count -1 < 0! File: reference.c, Line: 68 Error <1>: ApDelete(6765e0) of non-Appearance: magic 0 != 9ce10001 File: appearance.c, Line: 183 Couldn't create inst InstCreate: Undefined option: 7310624 Error <1>: RefDecr: ref 6765e0 count -2 < 0! File: reference.c, Line: 68 Error <1>: ApDelete(6765e0) of non-Appearance: magic 0 != 9ce10001 File: appearance.c, Line: 183 Couldn't create inst InstCreate: Undefined option: 7310944 Error <1>: RefDecr: ref 6765e0 count -3 < 0! File: reference.c, Line: 68 Error <1>: ApDelete(6765e0) of non-Appearance: magic 0 != 9ce10001 File: appearance.c, Line: 183 Couldn't create inst Warning: reading "/usr/share/geomview/data/Antenna.geom": can't find file "white.pgm.Z", ignoring texture: > texture { > file white.pgm.Z > alphafile grid.pgm.Z -^ > apply modulate Warning: reading "/usr/share/geomview/data/Antenna.geom": can't find file "grid.pgm.Z", ignoring texture: > file white.pgm.Z > alphafile grid.pgm.Z > apply modulate -^ > transform 2 0 0 0 0 2 0 0 0 0 1 0 0 0 0 1 ListCreate: Undefined attribute: 8449168 Error <1>: RefDecr: ref 6765e0 count -4 < 0! File: reference.c, Line: 68 Error <1>: ApDelete(6765e0) of non-Appearance: magic 0 != 9ce10001 File: appearance.c, Line: 183 Geomview: internal error: Segmentation violation; dump core now (y/n) [n] ? so, Steve I can confirm the bug with a new build.(also I have done apt-get remove --purge geomview) Regards, Leo A Divendres 28 Octubre 2005 21:39, Ted Kisner va escriure: > after installing nvidia-glx-dev, I can successfully build the package and > install. Build log is attached. I can run the program and use the menus, > etc. Not sure what to do with the program, so I can't really test > anything ;-) > > -Ted > > On Friday 28 October 2005 12:32, Ted Kisner wrote: > > hmm, looks like it is complaining about the OpenGL dev libraries- I'll > > install and try again... > > > > -Ted > > > > On Friday 28 October 2005 12:24, Ted Kisner wrote: > > > I installed the build-deps and ran dpkg-buildpackage. It died for me > > > as well. The output is attached. > > > > > > -Ted > > > > > > On Friday 28 October 2005 11:44, Leopold Palomo Avellaneda wrote: > > > > A Divendres 28 Octubre 2005 19:10, Steve M. Robbins va escriure: > > > > > Hello, > > > > > > > > > > On Fri, Oct 28, 2005 at 06:16:24PM +0200, Leopold Palomo Avellaneda > > > > wrote: > > > > > > I have updated and upgrade today, and I have installed geomview: > > > > > > ii geomview 1.8.1-9 interactive geometry viewing program > > > > > > > > > > > > I'm using Nvidia driver well configured and no graphics problem I > > > > > > have by now. > > > > > > > > > > > > > > > > > > If I open geomview, I have this messages: > > > > > > > > > > [ ... ] > > > > > > > > > > Thanks Leopold and thanks also to Larry Doolittle who sent me a > > > > > similar message, privately. > > > > > > > > > > The messages you quote are definitely from the geomview source. > > > > > However, the binary you used was built over a month ago. Would it > > > > > be too much trouble for you to do the following? > > > > > > > > > > 1. apt-get source geomview > > > > > 2. build a new deb with current libs and compiler tool chain > > > > > 3. install and run new geomview > > > > > > > > well, I don't have much time now, but I have problem building the > > > > packege: I have done 1 > > > > and 2 with: > > > > > > > > $~/linux/debian/packages-build/geomview-1.8.1$ fakeroot > > > > dpkg-buildpackage -us -uc -b > > > > > > > > . > > > > > > > > and after some messages I have this: > > > > > > > > > > > > configure: exit 1 > > > > /usr/bin/make ACLOCAL="`pwd`/missing aclocal" AUTOCONF="`pwd`/missing > > > > autoconf" AUTOMAKE="`pwd`/missing automake" AUTOHEADER="`pwd`/missing > > > > autoheader" moduledir=/usr/lib/geomview > > > > geomdatadir=/usr/share/geomview/data make[1]: Entering directory > > > > `/home/leo/linux/debian/packages-build/geomview-1.8.1' > > > > make[1]: *** No targets specified and no makefile found. Stop. > > > > > > > > What I'm doing wrong? > > > > > > > > Leo -- Linux User 152692 Catalonia pgpjL84WEl
Re: Bug#314988: Still a problem?
hmm, looks like it is complaining about the OpenGL dev libraries- I'll install and try again... -Ted On Friday 28 October 2005 12:24, Ted Kisner wrote: > I installed the build-deps and ran dpkg-buildpackage. It died for me as > well. The output is attached. > > -Ted > > On Friday 28 October 2005 11:44, Leopold Palomo Avellaneda wrote: > > A Divendres 28 Octubre 2005 19:10, Steve M. Robbins va escriure: > > > Hello, > > > > > > On Fri, Oct 28, 2005 at 06:16:24PM +0200, Leopold Palomo Avellaneda wrote: > > > > I have updated and upgrade today, and I have installed geomview: > > > > ii geomview 1.8.1-9 interactive geometry viewing program > > > > > > > > I'm using Nvidia driver well configured and no graphics problem I > > > > have by now. > > > > > > > > > > > > If I open geomview, I have this messages: > > > > > > [ ... ] > > > > > > Thanks Leopold and thanks also to Larry Doolittle who sent me a > > > similar message, privately. > > > > > > The messages you quote are definitely from the geomview source. > > > However, the binary you used was built over a month ago. Would it be > > > too much trouble for you to do the following? > > > > > > 1. apt-get source geomview > > > 2. build a new deb with current libs and compiler tool chain > > > 3. install and run new geomview > > > > well, I don't have much time now, but I have problem building the > > packege: I have done 1 > > and 2 with: > > > > $~/linux/debian/packages-build/geomview-1.8.1$ fakeroot dpkg-buildpackage > > -us -uc -b > > > > . > > > > and after some messages I have this: > > > > > > configure: exit 1 > > /usr/bin/make ACLOCAL="`pwd`/missing aclocal" AUTOCONF="`pwd`/missing > > autoconf" AUTOMAKE="`pwd`/missing automake" AUTOHEADER="`pwd`/missing > > autoheader" moduledir=/usr/lib/geomview > > geomdatadir=/usr/share/geomview/data make[1]: Entering directory > > `/home/leo/linux/debian/packages-build/geomview-1.8.1' > > make[1]: *** No targets specified and no makefile found. Stop. > > > > What I'm doing wrong? > > > > Leo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Bug#314988: Still a problem?
I installed the build-deps and ran dpkg-buildpackage. It died for me as well. The output is attached. -Ted On Friday 28 October 2005 11:44, Leopold Palomo Avellaneda wrote: > A Divendres 28 Octubre 2005 19:10, Steve M. Robbins va escriure: > > Hello, > > > > On Fri, Oct 28, 2005 at 06:16:24PM +0200, Leopold Palomo Avellaneda wrote: > > > I have updated and upgrade today, and I have installed geomview: > > > ii geomview 1.8.1-9 interactive geometry viewing program > > > > > > I'm using Nvidia driver well configured and no graphics problem I have > > > by now. > > > > > > > > > If I open geomview, I have this messages: > > > > [ ... ] > > > > Thanks Leopold and thanks also to Larry Doolittle who sent me a > > similar message, privately. > > > > The messages you quote are definitely from the geomview source. > > However, the binary you used was built over a month ago. Would it be > > too much trouble for you to do the following? > > > > 1. apt-get source geomview > > 2. build a new deb with current libs and compiler tool chain > > 3. install and run new geomview > > well, I don't have much time now, but I have problem building the packege: > I have done 1 > and 2 with: > > $~/linux/debian/packages-build/geomview-1.8.1$ fakeroot dpkg-buildpackage > -us -uc -b > > . > > and after some messages I have this: > > > configure: exit 1 > /usr/bin/make ACLOCAL="`pwd`/missing aclocal" AUTOCONF="`pwd`/missing > autoconf" AUTOMAKE="`pwd`/missing automake" AUTOHEADER="`pwd`/missing > autoheader" moduledir=/usr/lib/geomview > geomdatadir=/usr/share/geomview/data make[1]: Entering directory > `/home/leo/linux/debian/packages-build/geomview-1.8.1' > make[1]: *** No targets specified and no makefile found. Stop. > > What I'm doing wrong? > > Leo geomview-1.8.1_output.gz Description: GNU Zip compressed data
Re: Bug#314988: Still a problem?
On Fri, Oct 28, 2005 at 08:44:17PM +0200, Leopold Palomo Avellaneda wrote: > > 1. apt-get source geomview > > 2. build a new deb with current libs and compiler tool chain > > 3. install and run new geomview > well, I don't have much time now, but I have problem building the packege: > I have done 1 > and 2 with: > > $~/linux/debian/packages-build/geomview-1.8.1$ fakeroot dpkg-buildpackage -us > -uc -b > > . > > and after some messages I have this: > > > configure: exit 1 > /usr/bin/make ACLOCAL="`pwd`/missing aclocal" AUTOCONF="`pwd`/missing > autoconf" AUTOMAKE="`pwd`/missing automake" AUTOHEADER="`pwd`/missing > autoheader" moduledir=/usr/lib/geomview geomdatadir=/usr/share/geomview/data > make[1]: Entering directory > `/home/leo/linux/debian/packages-build/geomview-1.8.1' > make[1]: *** No targets specified and no makefile found. Stop. Wild guess: you forgot about apt-get build-dep geomview. BTW, the most valuable messages are before configure: exit 1 line. Regards Artur -- "Nasz bohater często siada przed komputerem i myśli" recenzja http://czat.zlotemysli.pl/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Bug#314988: Still a problem?
A Divendres 28 Octubre 2005 19:10, Steve M. Robbins va escriure: > Hello, > > On Fri, Oct 28, 2005 at 06:16:24PM +0200, Leopold Palomo Avellaneda wrote: > > I have updated and upgrade today, and I have installed geomview: > > ii geomview 1.8.1-9 interactive geometry viewing program > > > > I'm using Nvidia driver well configured and no graphics problem I have by > > now. > > > > > > If I open geomview, I have this messages: > > [ ... ] > > Thanks Leopold and thanks also to Larry Doolittle who sent me a > similar message, privately. > > The messages you quote are definitely from the geomview source. > However, the binary you used was built over a month ago. Would it be > too much trouble for you to do the following? > > 1. apt-get source geomview > 2. build a new deb with current libs and compiler tool chain > 3. install and run new geomview well, I don't have much time now, but I have problem building the packege: I have done 1 and 2 with: $~/linux/debian/packages-build/geomview-1.8.1$ fakeroot dpkg-buildpackage -us -uc -b . and after some messages I have this: configure: exit 1 /usr/bin/make ACLOCAL="`pwd`/missing aclocal" AUTOCONF="`pwd`/missing autoconf" AUTOMAKE="`pwd`/missing automake" AUTOHEADER="`pwd`/missing autoheader" moduledir=/usr/lib/geomview geomdatadir=/usr/share/geomview/data make[1]: Entering directory `/home/leo/linux/debian/packages-build/geomview-1.8.1' make[1]: *** No targets specified and no makefile found. Stop. What I'm doing wrong? Leo -- Linux User 152692 Catalonia pgpym7NTDkYvj.pgp Description: PGP signature
Re: Bug#314988: Still a problem?
Hello, On Fri, Oct 28, 2005 at 06:16:24PM +0200, Leopold Palomo Avellaneda wrote: > I have updated and upgrade today, and I have installed geomview: > ii geomview 1.8.1-9 interactive geometry viewing program > > I'm using Nvidia driver well configured and no graphics problem I have by now. > > > If I open geomview, I have this messages: [ ... ] Thanks Leopold and thanks also to Larry Doolittle who sent me a similar message, privately. The messages you quote are definitely from the geomview source. However, the binary you used was built over a month ago. Would it be too much trouble for you to do the following? 1. apt-get source geomview 2. build a new deb with current libs and compiler tool chain 3. install and run new geomview It would be much appreciated, -Steve -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Bug#314988: Still a problem?
A Divendres 28 Octubre 2005 04:48, Steve M. Robbins va escriure: > On Thu, Oct 27, 2005 at 12:24:13AM -0400, Adam C Powell IV wrote: > > Greetings, > > > > I'm wondering whether the last four months have provided enough time to > > confirm this is still a bug deserving of the "grave" status. Because of > > this bug, geomview has been removed from testing, which nearly derailed > > the transition of about 40 packages today. > > > > Is it time to mark this "unreproducible", and/or change its severity > > downward to "important"? > > Well, I certainly can't reproduce it: I don't have access to an amd64 > system. > > AMD porters: can someone please test geomview? If it produces the > error, could you try rebuilding it with the latest toolchain etc? > > Thanks, > -Steve Hi, I'm using Unstable of the amd64 por. Also, I have a chroot with a ia32 Debian sid. I have updated and upgrade today, and I have installed geomview: ii geomview 1.8.1-9 interactive geometry viewing program I'm using Nvidia driver well configured and no graphics problem I have by now. If I open geomview, I have this messages: [EMAIL PROTECTED]:~$ geomview InstCreate: Undefined option: 7309680 Error <1>: RefDecr: ref 6765e0 count -1 < 0! File: reference.c, Line: 68 Error <1>: ApDelete(6765e0) of non-Appearance: magic 0 != 9ce10001 File: appearance.c, Line: 183 Couldn't create inst InstCreate: Undefined option: 7310624 Error <1>: RefDecr: ref 6765e0 count -2 < 0! File: reference.c, Line: 68 Error <1>: ApDelete(6765e0) of non-Appearance: magic 0 != 9ce10001 File: appearance.c, Line: 183 Couldn't create inst InstCreate: Undefined option: 7310944 Error <1>: RefDecr: ref 6765e0 count -3 < 0! File: reference.c, Line: 68 Error <1>: ApDelete(6765e0) of non-Appearance: magic 0 != 9ce10001 File: appearance.c, Line: 183 Couldn't create inst also, if I open the file:/usr/share/geomview/data/Antenna.geom I receive a coredump and this messages: Couldn't create inst Warning: reading "/usr/share/geomview/data/Antenna.geom": can't find file "white.pgm.Z", ignoring texture: > texture { > file white.pgm.Z > alphafile grid.pgm.Z -^ > apply modulate Warning: reading "/usr/share/geomview/data/Antenna.geom": can't find file "grid.pgm.Z", ignoring texture: > file white.pgm.Z > alphafile grid.pgm.Z > apply modulate -^ > transform 2 0 0 0 0 2 0 0 0 0 1 0 0 0 0 1 ListCreate: Undefined attribute: 8421840 Error <1>: RefDecr: ref 6765e0 count -4 < 0! File: reference.c, Line: 68 Error <1>: ApDelete(6765e0) of non-Appearance: magic 0 != 9ce10001 File: appearance.c, Line: 183 Geomview: internal error: Segmentation violation; dump core now (y/n) [n] ? y If I do the same in my chroot: same version, update and upgraded today: geomview1.8.1-9 when I run it in the chroot jail: [EMAIL PROTECTED]:~$ geomview32 (ia32) geomview32 Xlib: extension "XFree86-DRI" missing on display ":0.0". I only have this message, also I don't understand it: but I can load the Antena.geom file and I only have this mesages: Warning: reading "/usr/share/geomview/data/Antenna.geom": can't find file "white.pgm.Z", ignoring texture: > texture { > file white.pgm.Z > alphafile grid.pgm.Z -^ > apply modulate Warning: reading "/usr/share/geomview/data/Antenna.geom": can't find file "grid.pgm.Z", ignoring texture: > file white.pgm.Z > alphafile grid.pgm.Z > apply modulate -^ > transform 2 0 0 0 0 2 0 0 0 0 1 0 0 0 0 1 and I can see perfectly a ugly plate, but this is another question. Regards, Leo -- Linux User 152692 Catalonia pgpLLikFGd3Ej.pgp Description: PGP signature
Re: Bug#314988: Still a problem?
On Thu, Oct 27, 2005 at 12:24:13AM -0400, Adam C Powell IV wrote: > Greetings, > > I'm wondering whether the last four months have provided enough time to > confirm this is still a bug deserving of the "grave" status. Because of > this bug, geomview has been removed from testing, which nearly derailed > the transition of about 40 packages today. > > Is it time to mark this "unreproducible", and/or change its severity > downward to "important"? Well, I certainly can't reproduce it: I don't have access to an amd64 system. AMD porters: can someone please test geomview? If it produces the error, could you try rebuilding it with the latest toolchain etc? Thanks, -Steve -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]