Re: Tyan Thunder K8S S2800 blues
Sander Smeenk wrote: I run 7 Tyan GX28 (all Dual Opteron) servers with Debian and 2.6 kernels and never have problems with ACPI on them. Tried flashing the BIOS to the latest available version? Yes. I even tried the latest beta version (3.02h). It didn't help. However, a colleague of mine is running a similar board without any problems. The only difference between his and mine is the simple fact that his doesn't have an on-board SCSI controller. Go figure. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Tyan Thunder K8S S2800 blues
Quoting Uroš Golja ([EMAIL PROTECTED]): > >>Any ideas? > However, I still maintain that the kernel will not boot unless > 'acpi=noirq' is appended to it. Anyone want to shed some light on the > subject? I had a laptop once, it had crappy ACPI tables in the BIOS. I had to fix them myself using some ACPI table dumper and vi. This might also be nescessary for your Tyan board. I run 7 Tyan GX28 (all Dual Opteron) servers with Debian and 2.6 kernels and never have problems with ACPI on them. Tried flashing the BIOS to the latest available version? Regards, Sander. -- | There is always one more imbecile than you counted on. | 1024D/08CEC94D - 34B3 3314 B146 E13C 70C8 9BDB D463 7E41 08CE C94D signature.asc Description: Digital signature
Re: Tyan Thunder K8S S2800 blues
Goswin von Brederlow wrote: Uro¹ Golja <[EMAIL PROTECTED]> writes: Any ideas? Change the cable, use a different port on the switch. Check the error counter in ifconfig. MfG Goswin Mea culpa. My linux box was using an IP that rightfully belonged to a Windows workstation. However, I still maintain that the kernel will not boot unless 'acpi=noirq' is appended to it. Anyone want to shed some light on the subject? Best regards, Uroš -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Tyan Thunder K8S S2800 blues
Uro¹ Golja <[EMAIL PROTECTED]> writes: > Any ideas? Change the cable, use a different port on the switch. Check the error counter in ifconfig. MfG Goswin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
