Re: sound-driver
On Fri, Dec 09, 2005 at 08:57:49PM +0100, Rob van Kraanen wrote: > Hi i have a Asus a7d laptop. > After some searching i found i have a dound-driver with a acore chipset, at > least thats what i think. > I'm a newby as it comes to compiling drivers, but i got no errors and even in > mij config i can see a device: "Midi through Midi Through Port-0 ALSE device" > But i hear nothing, anyone can help me? Midi is for musical instrument connections. It is not for playing sound on your computer. That would be done by the wave support part of the card instead. Of course given it is an ati chipset laptop, it is probably going to take a while to get proper support for the system under linux. In general, ati chips are just not well supported. I would expect the driver to use, if any work yet, would be snd-atiixp alsa driver. The newer the kernel the better the chance of it working is. Try adding that to /etc/modules, so that it loads early in the boot process. alsamixer should work for unmuting master and wave and turning up the volumes if it detects the chip. Len Sorensen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
sound-driver
Hi i have a Asus a7d laptop. After some searching i found i have a dound-driver with a acore chipset, at least thats what i think. I'm a newby as it comes to compiling drivers, but i got no errors and even in mij config i can see a device: "Midi through Midi Through Port-0 ALSE device" But i hear nothing, anyone can help me? regards Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: problem compiling sound driver
Thanks for the help. It worked perfectly and after reboot the sound was finally working (I switched from aRts to ALSA). Thanks, RossOn 6/30/05, Lennart Sorensen <[EMAIL PROTECTED]> wrote: On Thu, Jun 30, 2005 at 02:15:26AM +, Ross Urban wrote:> Hello all,> I was trying to compile an alsa driver for my realtek soundcard (alc650) and> during the ./configure step i'm getting the following error message. When I > tunnel down to the directory it is saying does not exist I get to> /lib/modules/2.6.8-11-em64t-p4-smp. Source exists in the directory but> source itself is not a directory, so I cannot go any further. I've checked > my packages and it appears that the kernel sources are installed. Are they> in a different place? Or is there another package that I could possibly be> missing. Here's the error output I get when i run ./configure. >> checking for kernel version... The file> /lib/modules/2.6.8-11-em64t-p4-smp/source/include/linux/version.h does not> exist.> Please, install the package with full kernel sources for your distribution > or use --with-kernel=dir option to specify another directory with kernel> sources (default is /lib/modules/2.6.8-11-em64t-p4-smp/source).Your source dir has to be fully configured and built (or a debian kernel-headers package which keeps the relevant parts).An unconfigured/cleaned source is no good for building against.apt-get install kernel-headers-2.6.8-11-em64t-p4-smp I guess in thiscase, and /usr/src/kernel- headers-2.6.8-11-em64t-p4-smp should containthe right files to compile against.Is the alsa in 2.6.8 too old to work with your card?Len Sorensen
Re: problem compiling sound driver
On Thu, Jun 30, 2005 at 02:15:26AM +, Ross Urban wrote: > Hello all, > I was trying to compile an alsa driver for my realtek soundcard (alc650) and > during the ./configure step i'm getting the following error message. When I > tunnel down to the directory it is saying does not exist I get to > /lib/modules/2.6.8-11-em64t-p4-smp. Source exists in the directory but > source itself is not a directory, so I cannot go any further. I've checked > my packages and it appears that the kernel sources are installed. Are they > in a different place? Or is there another package that I could possibly be > missing. Here's the error output I get when i run ./configure. > > checking for kernel version... The file > /lib/modules/2.6.8-11-em64t-p4-smp/source/include/linux/version.h does not > exist. > Please, install the package with full kernel sources for your distribution > or use --with-kernel=dir option to specify another directory with kernel > sources (default is /lib/modules/2.6.8-11-em64t-p4-smp/source). Your source dir has to be fully configured and built (or a debian kernel-headers package which keeps the relevant parts). An unconfigured/cleaned source is no good for building against. apt-get install kernel-headers-2.6.8-11-em64t-p4-smp I guess in this case, and /usr/src/kernel-headers-2.6.8-11-em64t-p4-smp should contain the right files to compile against. Is the alsa in 2.6.8 too old to work with your card? Len Sorensen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
problem compiling sound driver
Hello all, I was trying to compile an alsa driver for my realtek soundcard (alc650) and during the ./configure step i'm getting the following error message. When I tunnel down to the directory it is saying does not exist I get to /lib/modules/2.6.8-11-em64t-p4-smp. Source exists in the directory but source itself is not a directory, so I cannot go any further. I've checked my packages and it appears that the kernel sources are installed. Are they in a different place? Or is there another package that I could possibly be missing. Here's the error output I get when i run ./configure. checking for kernel version... The file /lib/modules/2.6.8-11-em64t-p4-smp/source/include/linux/version.h does not exist. Please, install the package with full kernel sources for your distribution or use --with-kernel=dir option to specify another directory with kernel sources (default is /lib/modules/2.6.8-11-em64t-p4-smp/source). Thanks, Ross
