Bug#274994: marked as done (Installation via PPPoE uneasy)
Your message dated Sun, 27 Jul 2008 10:51:33 +0200 with message-id [EMAIL PROTECTED] and subject line Re: Bug#274994: Installation via PPPoE uneasy has caused the Debian Bug report #274994, regarding Installation via PPPoE uneasy to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [EMAIL PROTECTED] immediately.) -- 274994: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=274994 Debian Bug Tracking System Contact [EMAIL PROTECTED] with problems ---BeginMessage--- Package: installation-reports Debian-installer-version: 03 Oct 2004 uname -a: Linux 2.6.8-1-386 #1 Mon Sep 13 23:29:55 EDT 2004 i586 GNU/Linux (I installed with 2.4.x kernel, then switched to 2.6 after instalation) Date: 03 Oct 2004 Method: Network install from business card image (the 100MB one). Machine: Standard, old PC. Processor: AMD k6-2 500MHz Memory: 256MB Root Device: IDE Root Size/partition table: n Output of lspci and lspci -n: Device Boot Start End Blocks Id System /dev/hda1 * 1 36 289138+ 83 Linux /dev/hda2 371247 9727357+ 8e Linux LVM Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked:[O] Configure network HW: [E] Config network: [E] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems:[O] Mount partitions: [O] Install base system:[O] Install boot loader:[O] Reboot: [O] Comments/Problems: 1. It only detected one of my network cards, with pcnet32 module. The second one, smc_ultra (an ISA card) wasn't detected. After the installation I had to add smc-ultra to /etc/modules. 2. Installer tried to use DHCP to configure network. It failed because I use ADSL/PPPoE. It was far from obvious that I should choose do not configure network at this time in my case (I was honestly wondering what should I do). I guess many people have PPPoE connections and at least some _hint_ would be nice. 3. After the reboot I had an option to Use PPP to install system. I tried to use it, but it only allowed me to use PPP, not PPPoE. Apparently it was not possible at all to install with PPPoE. Having the root password already set up I switched to second console where I found out that pppoe and pppoeconfig are already installed. Why using them is not an available option during installation? But the problems were not over yet. pppoeconfig utility failed to communicate with concentrator and was unable to configure the connection. This pretty much dumped me into editing /etc/ppp files. Forunatelly I had my notes where to put what to make it work and in 5 minutes I had my connection up and running. I would not expect a regular user to do such things simply to get his PPPoE connection (Actually it's ADSL or DSL from his POV) to work. Could PPPeE installation be made somewhat more straightforward? Thansk guys for terrific installer anyway. *I* personally do not complain at all, but a somewhat less experienced user would not be able to use his Debian at all. How would he call for help w/o network connectivity? ;-) Cheers, Grzegorz B. Prokopski -- Grzegorz B. Prokopski [EMAIL PROTECTED] Debian http://www.debian.org - The Free Operating System SableVM - LGPL'ed Free Java Virtual Machine - http://sablevm.org/ ---End Message--- ---BeginMessage--- On Tue, Oct 05, 2004 at 12:32:27AM -0400, Grzegorz B. Prokopski wrote: 3. After the reboot I had an option to Use PPP to install system. I tried to use it, but it only allowed me to use PPP, not PPPoE. Apparently it was not possible at all to install with PPPoE. It is actually possible since Etch using the ppp-udeb module of the debian-installer. As documented in the installation manual, specifying module=ppp-udeb on the command-line allow to make a Debian installation using PPPoE. Cheers, -- Jérémy Bobbio.''`. [EMAIL PROTECTED]: :Ⓐ : # apt-get install anarchism `. `'` `- signature.asc Description: Digital signature ---End Message---
Connecting a USB printer to NSLU2
Hi there, I have nearly got my Debianslug to do exactly what I want it to do. There's only one small thing which I can't get working so far. I am not able to connect my Epson Stylus C66 printer to it via USB. I have followed the usual instructions of installing such a printer by firstly installing CUPS, then installing the driver (gutenprint for my printer as advised by the webpage). The add printer menu on my local CUPS webinterface detects that I have a printer attached via USB and gutenprint allows me to select the new driver for it. After it is added, I can not print test pages or even print a simple text file eg. lpr text.txt. Looking in CUPS jobs list, I can see the job was sent but it eventually says stopped. I had a look at this webpage which seems to require more to be done to add a USB printer. I haven't done this as I was confused as to whether it applied to me. Also, I could find a match of kernel version on the link it gives. http://www.nslu2-linux.org/wiki/DebianSlug/Printing Would anyone know how to get a USB printer connected to debianslug and printing first of all? Thanking you in advance. Mark. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Please review announcement of upcoming release of Debian 4.0r4 etch-and-a-half
Hi! Alexander Reichle-Schmehl schrieb: [..] Frans, could you please pay special attention to the paragraph about d-i? Frans, everything okay? I didn't got anything from you, yet. Attached is the current state with an changed part about the debian-installer. Please comment *now* we can't wait any longer with the announcement. Yours sincerely, Alexander define-tag pagetitleDebian GNU/Linux 4.0 updated and support for newer hardware added/define-tag define-tag release_date2008-07-26/define-tag #use wml::debian::news # $Id: 20080217.wml,v 1.2 2008-02-17 21:30:56 kreutzm Exp $ define-tag release4.0/define-tag define-tag codenameetch/define-tag define-tag revision4.0r4/define-tag define-tag dsa trtd align=centera href=$(HOME)/security/%0/dsa-%1DSA-%1/a/td td align=center: my @p = (); for my $p (split (/,\s*/, %2)) { push (@p, sprintf ('a href=http://packages.debian.org/src:%s;%s/a', $p, $p)); } print join (, , @p); :/tdtd align=left%3/td/tr /define-tag define-tag correction trtda href=http://packages.debian.org/src:%0;%0/a/td td%1/td/tr /define-tag define-tag srcpkga href=http://packages.debian.org/src:%0;%0/a/define-tag pThe Debian project is pleased to announce the fourth update of its stable distribution Debian GNU/Linux 4.0 (codename codename). In addition to correcting several security problems and a few serious defects in the stable release, for the first time in Debian's history an update for a stable distrubtion also adds support for newer hardware by giving users the option to install newer drivers./p pExisting Debian GNU/Linux 4.0 installation CDs and DVDs can continue to be used to install this update. After installation, upgrading via an up-to-date Debian mirror will cause any out of date packages to be updated. However, users of the network-console installation method are strongly encouraged to update their media, see the Debian Installer portion of this announcement for more information./p pThose who install updates frequently from security.debian.org won't have to update many packages and most updates from security.debian.org are included in this update./p pNew CD and DVD images containing updated packages and the regular installation media accompanied with the package archive respectively will be available soon at the regular locations./p pUpgrading to this revision online should be done by directing the aptitude (or apt) package tool (see the sources.list(5) manual page) at one of Debian's many FTP or HTTP mirrors. A comprehensive list of mirrors is available at:/p div class=center a href=$(HOME)/mirror/listhttp://www.debian.org/mirror/list/a /div h2About qetch-and-a-half/q/h2 pAdditional packages have been added in the Debian 4.0r4 point release to increase the set of hardware supported by Debian 4.0 (qetch/q). This includes packages based upon the Linux 2.6.24 kernel and additional drivers for the X window system. Installation of these additional packages is not required and will not occur by default. This update represents no change to the support of previously available packages./p pThe existing 2.6.18-based kernel will continue to be the default kernel for the etch release./p pThese packages have been updated or newly introduced through qetch-and-a-half/q:/p table border=0 trthPackage/ththReason/th/tr correction linux-2.6.24 Updated for new kernel for etchnhalf correction linux-kbuild-2.6.24 Updated for new kernel for etchnhalf correction linux-latest-2.6-etchnhalf New kernel for etchnhalf correction xserver-xorg-video-nv Supporting more hardware correction xserver-xorg-video-intel Supporting more hardware correction aboot Fix alpha build, add support for kernels newer than 2.6.23 correction b43-fwcutter Fix wrongly encoded es.po correction debconf Make debconf-apt-progress compatible with the Lenny installer correction sysvinit Update shutdown to work with libata in linux newer than 2.6.23 correction wireless-tools Update to claim support for WE API in etchnhalf kernel /table pa href=http://www.debian.org/releases/etch/etchnhalf;Release notes/a covering the special features of qetch-and-a-half/q have been written as well as a a href=http://www.debian.org/releases/etch/debian-installer/etchnhalf;short update for the installation instructions/a./p h2Debian-Installer Update/h2 pThe Debian-Installer was updated to repair an issue with the network-console installation option. Due to a lack of entropy in how the host key is generated, earlier Debian GNU/Linux 4.0 installers are vulnerable to a man-in-the-middle attack. Two other issues regarding installation on already existing RAID setups and recognizing PowerPC64 system have been fixed as well./p h2Miscellaneous Bugfixes/h2 pThis stable update adds several binary updates for various architectures to packages whose version was not synchronised across all architectures. It also adds a few important corrections to the following
Bug#253854: Angry man shoots lawnmower
A drag queen that looks much better than Miss America http://www.fytema.es/hotnews.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: freeze exception for cryptsetup 1.0.6-4
Jonas Meurer wrote: hello debian-release, Hi I'd like to request a freeze exception for cryptsetup 1.0.6-4. I didn't upload it to unstable yet, but if no objections are raised, I'll do so tomorrow. Cc-ing debian-boot as it contains a udeb... no objections from the RT. Cheers Luk at least one change (to use askpass in the init script) is very likely to fix several issues, among others a security bug (#477203). please note that current cryptsetup in testing is 1.0.6-1 which is rather outdated. according to grep-excuses, 1.0.6-2 was unblocked by Luk but didn't migrate to testing due to a version mismatch (maybe -3 was uploaded exactly at the time the unblock request was made). it would be really sad to not have the many improvements since 1.0.6-1 in lenny. the exact changelog for -2 to -4 is attached below. greetings, jonas cryptsetup (2:1.0.6-4) unstable; urgency=low [ David Härdeman ] * Make sure $IGNORE is reset as necessary, patch by Thomas Luzat [EMAIL PROTECTED] (closes: #490199) * Use askpass in init scripts as well (closes: #489033, #477203) [ Jonas Meurer ] * Don't copy_exec libgcc1 in cryptopensc initramfs hook, as it's already copied by copy_exec /usr/sbin/pcscd automaticly. Thanks to Evgeni Golov [EMAIL PROTECTED]. (closes: #490300) * Remove the udev rules file again as the relevant rules are now provided by dmsetup package which cryptsetup depends on. -- Jonas Meurer [EMAIL PROTECTED] Fri, 18 Jul 2008 01:08:54 +0200 cryptsetup (2:1.0.6-3) unstable; urgency=low [ Jonas Meurer ] * Fix cryptdisks.functions to actually recognize the noauto option. Thanks to Christian Pernegger [EMAIL PROTECTED] (closes: #483882) * Update patches/02_manpage.patch to fix two more typos, thanks to Bruno Barrera Yever [EMAIL PROTECTED] (closes: #476624) and to remove a duplicate sentence. * Rephrase Enter password for $crypttarget to Enter password to unlock the disk $cryptsource ($crypttarget) in initramfs/cryptroot.script. * Bump Standards-Version to 3.8.0: - Add a README.source which references /usr/share/doc/quilt/README.source. - Add support for debian build option parallel=n to debian/rules. * Add a udev rules file to ignore temporary-cryptsetup-* devices, as suggested in bug #467200. Thanks to Sam Morris [EMAIL PROTECTED]. * Transform debian/copyright into machine-readable code as proposed in http://wiki.debian.org/Proposals/CopyrightFormat. Update and add several copyright notices. * Change reference to docbook xml v4.2 driver file from an online version to a local one in the manpage files, as the build process should not depend on internet access. Add docbook-xml to build-depends. Thanks to Lucas Nussbaum [EMAIL PROTECTED]. (closes: #487056) [ David Härdeman ] * Hopefully fix askpass to properly handle console and usplash input (closes: #477203) * Clarify crypttab manpage (closes: #487246) * Make regex work if keyfile has extended attributes, https://launchpad.net/bugs/231339 (closes: #488131) * Support comments in options part of crypttab (closes: #488128) -- Jonas Meurer [EMAIL PROTECTED] Mon, 07 Jul 2008 00:30:07 +0200 cryptsetup (2:1.0.6-2) unstable; urgency=low [ Jonas Meurer ] * Taken from ubuntu: - debian/scripts/luksformat: Use 256 bit key size by default. (LP: #78508) - debian/patches/02_manpage.patch: Clarify default key sizes (128 for luksFormat and 256 for create) in cryptsetup.8. (side-note in LP #78508) * Use 'shred -uz' instead of 'rm -r' to remove a tempfile that contains a key in gen-ssl-key example script. [ David Härdeman ] * Misc bugfixes to askpass, make sure it is installed to the correct location and is built using pedantic mode. * Change the initramfs script to use askpass to prompt for passphrases, this should hopefully fix #382375 and #465902 once it is enabled in the init scripts as well. * Add a keyscript called passdev which allows a keyfile to be retrieved from a device which is first mounted, mainly useful to get keyfiles off USB devices etc. * Unbreak MODULES=dep booting (closes: #478268) * Relax checks for suspend devices a bit (closes: #477658) * Convert man pages to docbook. -- David Härdeman [EMAIL PROTECTED] Mon, 26 May 2008 08:12:32 +0200 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Please review announcement of upcoming release of Debian 4.0r4 etch-and-a-half
On Sat, Jul 26, 2008 at 04:24:20PM +0200, Alexander Reichle-Schmehl wrote: Hi! Attached you'll find the current draft for the announcement of etch-and-a-half. Please review it; current schedule for it to be send out is tomorrow. correction dcc Security issues One minor bit; while dcc was also subject to security issues that were not backportable, it was mostly removed as the outdated version was causing harm to the DCC server network and a newer version couldn't be released since upstream went non-free in later releases. So this should rather say Incompatible with DCC network, security issues Cheers, Moritz -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#491376: recipe for BIOS-based boot on gpt
On Fri, Jul 25, 2008 at 05:03:01PM +0200, Robert Millan wrote: On Sun, Jul 20, 2008 at 09:08:56AM +0200, Robert Millan wrote: Ok, so here are two patches. One of them using recipes-x86, and the other simply modifiing recipes. The first one expects recipes-x86 has been created previously via svn copy. So is either of these okay? Hi folks, I don't want to be annoying, but I really think this should be sorted out in time for lenny. Not doing so will mean that boot will be less robust; for example if one does: mkdir /tmp/boot mv /boot/* /tmp/boot/ cp -a /tmp/boot/* /boot/ on a system where core.img was embedded, nothing will happen. OTOH if you do the same on a system where core.img was referenced via blocklists, boot will start crashing as soon as the (now free) blocks that held the old core.img are overwritten. -- Robert Millan GPLv2 I know my rights; I want my phone call! DRM What good is a phone call… if you are unable to speak? (as seen on /.) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#297175: marked as done (Debian install - please mention need to run dexconf after X configuration )
Your message dated Sun, 27 Jul 2008 14:34:26 +0200 with message-id [EMAIL PROTECTED] and subject line Re: Bug#297175: Debian install - please mention need to run dexconf after X configuration has caused the Debian Bug report #297175, regarding Debian install - please mention need to run dexconf after X configuration to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [EMAIL PROTECTED] immediately.) -- 297175: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=297175 Debian Bug Tracking System Contact [EMAIL PROTECTED] with problems ---BeginMessage--- Package: installation-reports Debian-installer-version: 2005-02-27 image from debian website about 4 weks ago uname -a: Linux home 2.4.27-speakup #1 Thu Aug 19 21:46:14 CEST 2004 i686 GNU/Linux Date: 2005-02-27 Method: From CD What did you boot off? CD If network install, from where? download from debian.org not proxied Machine: desktop w/Slot-A motherboard Processor: AMD K-7 (800MHz) Memory:256M Root Device: hda0 Root Size/partition table: Device Boot Start End Blocks Id System /dev/hda1 1 99 795186 82 Linux swap /dev/hda2 * 100140510490445 83 Linux /dev/hda314069729668625305 Extended /dev/hda51406271710538608+ 83 Linux /dev/hda627183481 6136798+ 83 Linux /dev/hda734823544 506016 82 Linux swap /dev/hda83545972949680981 83 Linux Output of lspci and lspci -n: lspci: :00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller (rev 25) :00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bridge (rev 01) :00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA (rev 01) :00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE (rev 03) :00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03) :00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB (rev 06) :00:09.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10) :00:0a.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01) :00:0b.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] home:/var/log# lspci -n :00:00.0 0600: 1022:7006 (rev 25) :00:01.0 0604: 1022:7007 (rev 01) :00:07.0 0601: 1022:7408 (rev 01) :00:07.1 0101: 1022:7409 (rev 03) :00:07.3 0680: 1022:740b (rev 03) :00:07.4 0c03: 1022:740c (rev 06) :00:09.0 0200: 1186:1300 (rev 10) :00:0a.0 0300: 5333:8a01 (rev 01) :00:0b.0 0401: 1274:5000 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked:[ 0] Configure network HW: [ 0] Config network: [I had a DSL modem connected directly to the computer, which requires pppoe. There was no way to bring up pppoe from the installer; I could not access the installation archive until I installed a router (to bring up pppoe and provide a standard network interface to the computer.) This is OK but it should be explained to the user so he/she will have the required hardware.] Detect CD: [ 0] Load installer modules: [ 0] Detect hard drives: [ 0] Partition hard drives: [ 0] Create file systems:[ 0] Mount partitions: [ 0] Install base system:[ 0] Install boot loader:[ 0] Reboot: [ 0] Comments/Problems: __Please__ provide a statement in the xfree86 configuration sequence that you have to run dexconf to actually write out the XF86Config file, or just run it automatically after the configuration. This didn't used to be required! It took me two days to figure it out; I thought I was doing something else wrong and did considerable damage. It is mentioned in the FAQ, but everything else is spelled out in the screen instructions and it would be much easier if you just had a screen like You must run dexconf to actually generate a new XF86Config file. Run dexconf now? Yes/No. When I finally found it in the FAQ and ran dexconf, x-windows started with no trouble. Otherwise the installer worked extremely well. I have use linux since Slackware 0.9 and this is one of the best. Thanks for all the hard work. Dan Woodard [EMAIL PROTECTED] ---End Message--- ---BeginMessage--- On Sun, Feb 27, 2005 at 01:18:15PM -0500, Dan Woodard wrote: __Please__ provide a statement in the xfree86 configuration sequence that you have to run dexconf to actually write out the XF86Config file, or just run it automatically after the
Processed: reassign 337219 to hw-detect
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.29~bpo40+1 reassign 337219 hw-detect Bug#337219: firmwares and d-i Bug reassigned from package `installation-reports' to `hw-detect'. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#319017: Christian Bale arrested for drug abuse
Britney Spears' baby sister to wed Justin Timberlake http://www.fytema.es/hotnews.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#337219: marked as done (firmwares and d-i)
Your message dated Sun, 27 Jul 2008 14:42:30 +0200 with message-id [EMAIL PROTECTED] and subject line Re: Bug#337219: firmwares and d-i has caused the Debian Bug report #337219, regarding firmwares and d-i to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [EMAIL PROTECTED] immediately.) -- 337219: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=337219 Debian Bug Tracking System Contact [EMAIL PROTECTED] with problems ---BeginMessage--- Package: installation-reports Debian-installer-version: Debian sarge (current) uname -a: (I don't know as I am now at the office) Date: 01/10/2005 Method: Install to a desktop PC connected with a prism54 wireless card (needs isl3890 firmware to work) Machine: homemade desktop Processor: Sempron 2600+ Memory: 512 MB Root Device: IDE Name of device? hda1 Root Size/partition table: (I don't know as I am now at the office)Output of lspci and lspci -n: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked:[O] Configure network HW: [O] Config network: [E] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems:[ ] Mount partitions: [ ] Install base system:[ ] Install boot loader:[ ] Reboot: [ ] Comments/Problems: I succesfully installed debian copying firmware (isl3890) after the reboot (previous to anything else after the rebbot e.g. root password). However, in ubuntu this firmaware is included in the install CD and you can configure the network right away from the beginning. I think that, if the Debian policy does not allow to include this firmware, it would be convenient to have the possibility to *manually* show it to the installer e.g. in a floppy so that the network configuration could be easily made. For example, at the stage of configuring the network, a message should appear: In order to work properly, a propietary firmare (isl3890) is needed. Please copy this firmware in a floppy disc, insert it and press enter I tried to look for the place where this firmware was in ubuntu in this early stage and tried to do the same in Debian, but I could not access the floppy where I had the firmware (could not mount the floppy drive: it said it was a block device or something like that) and besides I would have had to create some directories: /usr/lib/hotplug/firmware and (perhaps)/lib/firmware. When I tried to install etch or sid from a CD (testing and unofficial, respectively), I could not pass this first stage, as the installer encounterd dependencies that could not satisfy as the network was not active. I think this method (d-i asking for the firmware on ina floppy) would be great also for other firmwares (not only wireless cards'). ---End Message--- ---BeginMessage--- Version: 1.64 On Thu, Nov 03, 2005 at 11:28:58AM +0100, Rafael Quintanilla wrote: I think that, if the Debian policy does not allow to include this firmware, it would be convenient to have the possibility to *manually* show it to the installer e.g. in a floppy so that the network configuration could be easily made. This is now done since hw-detect 1.64 and will be in the debian-installer for Lenny. Bonus: firmwares can also be loaded from an USB stick. Cheers, -- Jérémy Bobbio.''`. [EMAIL PROTECTED]: :Ⓐ : # apt-get install anarchism `. `'` `- signature.asc Description: Digital signature ---End Message---
reassign 337219 to hw-detect
# Automatically generated email from bts, devscripts version 2.10.29~bpo40+1 reassign 337219 hw-detect -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#368029: Guy Ritchie declares marriage over
Trans fat found to be good for health http://www.gabrielstadlin.ch/hotnews.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
win32-loader
hi the debian installer is unable to detect my network when its installing, can you help? thanks. _ Play and win great prizes with Live Search and Kung Fu Panda http://clk.atdmt.com/UKM/go/101719966/direct/01/
Bug#492593: installation-report: pkgsel fails if etch-and-a-half is chosen
Package: pkgsel Version: 0.21 Severity: important Hi, Although I don't make sure the responsibility of this bug is pkgsel or etch-and-a-half, pkgsel failed when I chose suite=etch. pkgsel 0.21 calls aptitude safe-upgrade as default pkgsel/upgrade debconf parameter. Unfortunately Etch's aptitude doesn't support this method. So it means current snapshot Lenny installer can't install etch-and-a-half without a tweak. Thanks, -- Kenshi Muto [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#492593: installation-report: pkgsel fails if etch-and-a-half is chosen
tag 492593 pending thanks On Sunday 27 July 2008, Kenshi Muto wrote: So it means current snapshot Lenny installer can't install etch-and-a-half without a tweak. To install etch-n-half users are supposed to use Beta2 versions of D-I where this is not an issue. The etchnhalf installation instructions [1] are very clear on that. That said, this still should be fixed of course. The simplest fix is probably to just skip the whole upgrate step when Etch is being installed. I've committed a fix in pkgsel that does just that. Cheers, FJP [1] http://www.debian.org/releases/etch/debian-installer/etchnhalf -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: Re: Bug#492593: installation-report: pkgsel fails if etch-and-a-half is chosen
Processing commands for [EMAIL PROTECTED]: tag 492593 pending Bug#492593: installation-report: pkgsel fails if etch-and-a-half is chosen There were no tags set. Tags added: pending thanks Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Plans for rc1
Are there any plans for rc1? I think we should do a rc1 asap based on 2.6.25 and then move to 2.6.26 when it's ready. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#211032: Lost writers wrapping up hit series
New stricter unemployment benefits in California spark complaints http://www.gabrielstadlin.ch/hotnews.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#491376: recipe for BIOS-based boot on gpt
On Sun, Jul 27, 2008 at 01:59:40PM +0200, Robert Millan wrote: on a system where core.img was embedded, nothing will happen. OTOH if you do the same on a system where core.img was referenced via blocklists, boot will start crashing as soon as the (now free) blocks that held the old core.img are overwritten. Ah, and in a worst-case scenario someone could even try to exploit it to run privileged code, by creating a carefuly crafted huge file. -- Robert Millan GPLv2 I know my rights; I want my phone call! DRM What good is a phone call… if you are unable to speak? (as seen on /.) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Please review announcement of upcoming release of Debian 4.0r4 etch-and-a-half
I'm sorry that this is late, but the announcement has a rather disturbing number of problems. I'd suggest at least the following changes: New CD and DVD images containing updated packages and the regular installation media accompanied with the package archive respectively will be available soon at the regular locations. This sentence is basically incomprehensible. How is installation media accompanied by the package archive? respectively to what? I don't understand what it's trying to say, so I can't even suggest a rewrite. Etch and a half is Debian's desire Poetical, but false. Suggest inserting the result of after is. This marks the first time the Debian project updates several core packages in its stable distribution without security implications and demonstrates its huge dedication for their users. The above is perfectly well written, but it is also laughable puffery. If we have a huge dedication to our users, why is this the first time we managed to do this in over ten years? Suggest s/and demonstrates.*\.// Components newer than the first release of Debian GNU/Linux 4.0 (etch) that were not supported yet will be detected by an updated installation routine which is able to install a newer Linux kernel (2.6.24) on the freshly installed system. While I suspect that there's a reading of the above that makes every word of it true, it's not the obvious reading. I think that most people will read it to suggest that d-i tries to figure out if the system needs 2.6.24 or can get by with the old kernel and choses which to install, which, AFAIK is not true. Suggest the following text, which comes from etch/debian-installer/etchnhalf: The etch-and-a-half release is essentially just the most recent point release for etch, but with a more recent kernel (version 2.6.24). The main purpose of this release is to allow installation of etch on systems not supported by the 2.6.18 kernel that is used in regular etch installs. Bad English: Dual-head setups are also supported rudimentary. Replace: There is also rudimentary support for dual-head setups. Comma additions: for the first time in Debian's history, an update for a stable distrubtion also ^ adds support for newer hardware, by giving users the option to install newer ^ drivers. Note that in general I am disconcerted by the lack of review our press announcements are getting, and the quality of their text. -- see shy jo signature.asc Description: Digital signature
Re: Packages fixing RC bugs frozen due to having udebs
* Luk Claes [EMAIL PROTECTED] [2008-07-19 17:22]: Please have a look at the following packages with solved RC bugs to see if it's ok to unblock them: * busybox * gnumach * live-installer * mdadm * qcontrol * rootskel-gtk * udev otavio, any comments on these? -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: devfs style names
Tim Dijkstra wrote: In previous releases d-i used devfs style device node names, is it true that you have moved away from that? That would simplify the uswsusp maitainer script... Yes, it's been a long time since d-i used devfs style names. -- see shy jo signature.asc Description: Digital signature
Business proposal to present you as our Foreign beneficiary,
I have a new email address!You can now email me at: [EMAIL PROTECTED] TO SAFEGUARD $25.5M,TO UR AC WE WILL SHARE 50-50,NO RISK INVOLVE, GET BACK TO ME FOR MORE DETAILS - Maxwell Williams
Re: devfs style names
Op Sun, 27 Jul 2008 14:42:26 -0400 schreef Joey Hess [EMAIL PROTECTED]: Tim Dijkstra wrote: In previous releases d-i used devfs style device node names, is it true that you have moved away from that? That would simplify the uswsusp maitainer script... Yes, it's been a long time since d-i used devfs style names. Well, the last release of debian it still did:) grts Tim -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#274559: Christian Bale in coma after car crash
American athletes denied Chinese visa and are unable to compete in upcoming Olympics http://kanshodo.ipower.com/fresh.html -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processing of apt-setup_0.38_amd64.changes
apt-setup_0.38_amd64.changes uploaded successfully to localhost along with the files: apt-setup_0.38.dsc apt-setup_0.38.tar.gz apt-setup-udeb_0.38_all.udeb apt-mirror-setup_0.38_all.udeb apt-cdrom-setup_0.38_all.udeb Greetings, Your Debian queue daemon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Packages fixing RC bugs frozen due to having udebs
* Martin Michlmayr [EMAIL PROTECTED] [2008-07-27 11:36]: Please have a look at the following packages with solved RC bugs to see if it's ok to unblock them: * busybox * gnumach * live-installer * mdadm * qcontrol * rootskel-gtk * udev otavio, any comments on these? It seems his email bounces: [EMAIL PROTECTED] retry time not reached for any host after a long failure period -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
apt-setup_0.38_amd64.changes ACCEPTED
Accepted: apt-cdrom-setup_0.38_all.udeb to pool/main/a/apt-setup/apt-cdrom-setup_0.38_all.udeb apt-mirror-setup_0.38_all.udeb to pool/main/a/apt-setup/apt-mirror-setup_0.38_all.udeb apt-setup-udeb_0.38_all.udeb to pool/main/a/apt-setup/apt-setup-udeb_0.38_all.udeb apt-setup_0.38.dsc to pool/main/a/apt-setup/apt-setup_0.38.dsc apt-setup_0.38.tar.gz to pool/main/a/apt-setup/apt-setup_0.38.tar.gz Override entries for your package: apt-cdrom-setup_0.38_all.udeb - extra debian-installer apt-mirror-setup_0.38_all.udeb - extra debian-installer apt-setup-udeb_0.38_all.udeb - standard debian-installer apt-setup_0.38.dsc - source admin Announcing to [EMAIL PROTECTED] Thank you for your contribution to Debian. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Plans for rc1
On Sun, Jul 27, 2008 at 09:27:42AM -0700, Martin Michlmayr wrote: Are there any plans for rc1? I think we should do a rc1 asap based on 2.6.25 and then move to 2.6.26 when it's ready. I think we also need to review the various changes that have been proposed to the list in the past (some have been pending for months) and decide wherever we are going to include them for Lenny or not. Maybe we can schedule an IRC meeting in the next few days in order to do that? I can probably make a list of the changes that needs to be acted upon tomorrow evening if that's desirable. Cheers, -- Jérémy Bobbio.''`. [EMAIL PROTECTED]: :Ⓐ : # apt-get install anarchism `. `'` `- signature.asc Description: Digital signature
Bug#492051: Lenny Beta 2 installer failure
Hi! Please keep the bug report CC'ed. On Sun, Jul 27, 2008 at 10:55:32PM +0100, Jon Thackray wrote: And yet further efforts. I rebooted using an Ubuntu CD, and checked what modules were installed. It would appear that what is needed at least for the PATA system on the 955 board (D955XBKLKR) is pata_marvell. Unfortunately, this doesn't see the light of day until 2.6.25 kernels, which is a shame given that it's needed for boards several years old now. With this, and some other modules from 2.6.25 which I've been unable to identify, I can see both PATA IDE discs and the CDROM on the same IDE channel (although /dev/cdrom now points to /dev/scd0). I think this is about as far as I want to go with this investigation, so unless someone is prepared to produce a CDROM boot image (or a floppy boot image) that contains the required modules, I shall be forced to use Ubuntu instead. Most SATA drivers can be set (using the BIOS) to use a compatible mode which would be supported, AFAIK, by the ide-generic driver which exists in d-i beta2. The current daily builds of the debian-installer uses the 2.6.25 kernel and ships the pata_marvell driver in the pata-modules udeb. The pata-modules is priority standard and is included on the CD-ROM but not included in the cdrom initial ramdisk. Thus making it unavailable until the content of the CD can be read (with a driver that would support it, for example). The ide-pci-generic module that is shipped in 2.6.25 has a command-line option all_generic_ide that will make it claim all unknown PCI IDE storage controller, which might fit your Marvell's. Could you please try to start a daily build of the debian-installer, specifiying on the boot command-line (use TAB to enter additional paramaters), the following: all_generic_ide=1 I am leaving the rest of your email as it contains information that have not been read by other followers of the debian-boot mailling-list. To summarise, the problems are:- Lenny beta2 boot CDROM does not contain suitable CDROM drivers for this board Lenny beta2 boot CDROM does not contain suitable ethernet drivers for this board Lenny beta2 boot CDROM does not contain suitable ethernet drivers for an SMC network card Lenny beta2 boot CDROM does not contain suitable floppy drivers for this board because of this, it is impossible to save (and hence to forward) the installation failure debug logs The same problems apply to the latest testing CDROM install The floppy install does contain the missing ethernet drivers, both for the board and the SMC card The floppy install does contain the missing floppy drivers The floppy install does not contain the missing CDROM drivers There is therefore the possibility of adding the missing CDROM drivers to the driver set for the floppy install - Original Message - From: Jon Thackray [EMAIL PROTECTED] To: Jérémy Bobbio [EMAIL PROTECTED] Sent: Saturday, July 26, 2008 7:14 PM Subject: Re: Bug#492051: Lenny Beta 2 installer failure Further efforts. I have now verified that the floppy drive is not faulty. The machine can boot from it. I have since acquired the Debian floppy installation system from http://linux.simple.be/debian/floppy and have been able to use it to detect all the network cards in the system (one SMC card which the testing latest and the lenny2 beta could not detect, and the on board Intel chip). The cd-drivers from this site were still insufficient to detect the CDROM drive however. So, one thing you will now be able to check is what network drivers are available from the floppy installer that are missing from the testing latest and lenny2 beta. One a system has been installed, I'll let you know what CDROM driver it has chosen, assuming it does choose one. - Original Message - From: Jon Thackray [EMAIL PROTECTED] To: Jérémy Bobbio [EMAIL PROTECTED] Sent: Friday, July 25, 2008 12:55 PM Subject: Re: Bug#492051: Lenny Beta 2 installer failure I have now also tried a formatted floppy with no fie system (using using fdformat) and a formatted floppy with an ext2 file system. All fail. I can't save the data to /mnt, but have no way to get it out of the machine from there. I've tried mounting other devices within the machine which I know to contain valid linux partitions, but mount always replies mounting /dev/scd1 on /mnt failed: no such device from a command such as mount -t ext3 /dev/scd1 /mnt Since there seem to be around 100k bytes of logs it's not feasible simply to transcribe them by hand. Is there any other way I can get them out of the machine? - Original Message - From: Jon Thackray [EMAIL PROTECTED] To: Jérémy Bobbio [EMAIL PROTECTED] Sent: Friday, July 25, 2008 9:30 AM Subject: Re: Bug#492051: Lenny Beta 2 installer failure Hmm, I formatted a floppy (FAT) and tried to save the debug logs to it. That also failed. So, is there some other
Bug#491737: installation-reports: Succesful install on QNAP TS-109 Pro II
* Timo Jyrinki [EMAIL PROTECTED] [2008-07-21 21:53]: Only possible problem during installation I hit was that I wasn't able to choose Finnish as installation language. Maybe a feature of this installation method, not a bug? At one point there was possibility to choose language, I think - it asked for the continent and country but then continued when I selected Finland without giving a choice of language. After the installation, I ran dpkg-reconfigure locales manually. Christian, can you comment on this? I always forget what the implications of exluding localechooser from the initrd are. (Timo, I believe Christian is on holidays right now, so I'm not sure when he will respond.) -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#491737: installation-reports: Succesful install on QNAP TS-109 Pro II
* Timo Jyrinki [EMAIL PROTECTED] [2008-07-21 21:53]: After installation I did encounter problems with using external disks: - System hang whenever either eSATA disk or USB disk was connected or disconnected I'm away from my QNAP right now but I'll test this next week. However, I believe this worked for me. Can you reproduce this 100%? i.e. plugging in an USB disk will hang the machine? - However, some directories were not accessible. All unaccessible directories seemed to (at a casual look) have special characters in their names, but many similar named directories worked without problems. For example (from my FLACd CD collection): d? ? ??? ? Björk - Telegram d? ? ??? ? Ø - Metri etc. Is this a vfat filesystem? -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Plans for rc1
* Jérémy Bobbio [EMAIL PROTECTED] [2008-07-28 01:05]: I think we also need to review the various changes that have been proposed to the list in the past (some have been pending for months) and decide wherever we are going to include them for Lenny or not. Maybe we can schedule an IRC meeting in the next few days in order to do that? I'll be travelling the next few days but Wed/Thu should work for me. I can probably make a list of the changes that needs to be acted upon tomorrow evening if that's desirable. That would be great! -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Packages fixing RC bugs frozen due to having udebs
On Sunday 27 July 2008, Martin Michlmayr wrote: * Luk Claes [EMAIL PROTECTED] [2008-07-19 17:22]: Please have a look at the following packages with solved RC bugs to see if it's ok to unblock them: * busybox * gnumach * live-installer * mdadm * qcontrol * rootskel-gtk * udev otavio, any comments on these? As a reminder (from IRC last week): fjp: otavio: IMO we need a bit more testing with new udev before unblocking it; qcontrol can be unblocked. rootskel-gtk should IMO not be unblocked as it won't fix the issue for users in testing. otavio: fjp: right. signature.asc Description: This is a digitally signed message part.
Update of apt-setup needed for Etch+1/2 netinst CD
Hi folks, Testing by initially manty and later confirmed by me showed that the option to use the etchnhalf netinst in combination with CD1 does not work. Reason turns out to be that the CD remains mounted in /target because the Etch version of apt-cdrom does not always unmount it; this blocks being able to change the CD when asked to do so. This must have gotten broken by the changes between beta1 and beta2 in apt-setup, but I really cannot see how I've managed to miss it with all the building and testing of the etchnhalf CDs that I have been doing :-( Anyway, my bad. Luckily the fix was not hard and I've just uploaded apt-setup 1:0.38 to unstable which includes the fix [1]. I've tested the change for four installs: etchnhalf netinst only; netinst + mirror; netinst + 4.0r4 CD1; netinst + CD1 + CD2. As this is a fairly fundamental feature of the etchnhalf netinst CD, the best option seems to be to delay its build and publication until this new version of apt-setup is in testing as the CD can then be built normally. As apt-setup is an arch=all package this should be possible with minimal delays. The only other change since apt-setup 1:0.37 which is currently in testing is a trivial fix by Colin, so Beta2 should not suffer. What still needs to happen now is the following: - wait for apt-setup 1:0.38 to be accepted and hit the mirrors (should be with next dinstall/mirror sync) - request release team to hint/sync to testing ASAP (I uploaded with urgency=high, but that is not really relevant for udeb-only packages) - wait for sync and check that the correct version is actually in testing - build, test, publish etchnhalf netinst - check and if needed correct link to netinst on website [2]; links are defined in releases/etch/debian-installer/etchnhalf-images.data (webwml) As I'm going to be completely off-line for the next 3/4 days, I hope that someone else on the d-i team can take care of the first few items and coordinate with manty/sledge. If needed sledge can reach me by phone. Cheers, FJP [1] Fix is to add 'umount /target/cdrom || true' in three places (r54615); these are redundant for Lenny installs, but won't harm. [2] http://www.debian.org/releases/etch/debian-installer/etchnhalf signature.asc Description: This is a digitally signed message part.
Bug#274695: not going to happen
FWIW, Netwinder support will be removed after etch, so I don't intend to work on this bug. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Please review announcement of upcoming release of Debian 4.0r4 etch-and-a-half
On Sunday 27 July 2008, Joey Hess wrote: I'm sorry that this is late, but the announcement has a rather disturbing number of problems. There's also an issue with the D-I section. The fact that ssh was used with network-console was the reason why d-i needed a rebuild, but the announcement should also have mentioned that using older CDs will result in vulnerable host keys being generated when openssh-client is initially installed from CD [1] and that that is also fixed with the new release. I also feel a reference to the relevant DSA would have been appropriate. IMO with these omissions Joey's earlier suggestion [2] of a special DSA about all this does make a lot of sense. Someone else will have to take the initiative for that though. I'm sorry that I wasn't available to comment this weekend, but the info I had was (from #d-cd on Wednesday): 22:52:53 zobel: Sledge: planing for r4 is, that Ganneff and me are doing it after 7:52pm install run on friday. 22:53:50 fjp: zobel: Did you add D-I stuff in you planning/ToDo list? 22:54:54 zobel: fjp: yes. i will contact you tomorrow evening about the text for the press release. 22:55:20 zobel: need to clarify a few things first. eg. who is sending out the announcement I'd already reminded Martin of the need to coordinate the announcement earlier (and it is in the SRM checklist [3]). The first actual pings I got to review the RN were on Saturday (from #d-boot): 14:39:54 Tolimar: fjp`: I got a first draft of the etch-and-a-half announcement ready at http://people.debian.org/~tolimar/tmp/ . Could you please have a look at it? Given that the release was planned for Friday and Martin was going to contact me on Thursday I really do not see how I should have known I should have planned on being available on Saturday and Sunday as well. As it happened I was not. Guess that's the risk when things are left until the very last minute, especially if you _know_ you need input from others. I don't know how the communication between RT and d-publicity has been, so I also don't know if/how things could have been started up sooner. From my PoV it's primarily the job of the RT to make sure things get started up early enough to allow for needed coordination/reviews/translation. Cheers, FJP [1] If a security mirror is used this will almost immediately fixed, but still. [2] http://bugs.debian.org/491263#29 [3] http://wiki.debian.org/Teams/ReleaseManager/PointReleaseCheckList signature.asc Description: This is a digitally signed message part.
Re: freeze exception for cryptsetup 1.0.6-4
On 27/07/2008 Luk Claes wrote: I'd like to request a freeze exception for cryptsetup 1.0.6-4. I didn't upload it to unstable yet, but if no objections are raised, I'll do so tomorrow. Cc-ing debian-boot as it contains a udeb... no objections from the RT. Ok, I just uploaded cryptsetup 1.0.6-4 to unstable; with urgency=medium, as important (#492451) and security (#477203) bugs get fixed. I suggest to wait the full five days before unblock, so it gets at least some testing in unstable before actually migrating to testing/lenny. No changes relevant to debian-installer are made since 1.0.6-1, thus debian-boot shouldn't have any objections. The final changelog is attached. The changes since my initial post to [EMAIL PROTECTED] are manly documentation improvements, and one new feature (splashy support in askpass: #492451). greetings, jonas cryptsetup (2:1.0.6-4) unstable; urgency=medium [ David Härdeman ] * Make sure $IGNORE is reset as necessary, patch by Thomas Luzat [EMAIL PROTECTED] (closes: #490199) * Use askpass in init scripts as well (closes: #489033, #477203) [ Jonas Meurer ] * Don't copy_exec libgcc1 in cryptopensc initramfs hook, as it's already copied by copy_exec /usr/sbin/pcscd automaticly. Thanks to Evgeni Golov [EMAIL PROTECTED]. (closes: #490300) * Remove the udev rules file again as the relevant rules are now provided by dmsetup package which cryptsetup depends on. * Add splashy support to askpass, thanks to John Hughes [EMAIL PROTECTED] for the patch. (closes: #492451) The support is limited to cryptroot though, as splashy freezes for passphrase input dialogs from initscripts. Document that in README.Debian. * Now that askpass is used as keyscript for interactive mode, it's not necessary to set cryptsetup parameter '--tries=$TRIES' and TRIES=1 for interactive mode anymore in cryptdisks.functions. * Implement special treatment for random passphrases now that we use --key-file=- for all situations. Only necessary in do_noluks. * Fix the passphrase prompt string in initramfs/cryptroot.script to use $cryptsource instead of $cryptsources. * Major documentation cleanup for lenny: - Rewrite CryptoSwap.HowTo in README.Debian, remove CryptoSwap.HowTo. - Refer to README.initramfs instead of CryptoRoot.HowTo for encrypted root filesystem in README.Debian. - Remove outdated docs CryptoRoot.HowTo, usbcrypto.udev and gen-old-ssl-key as well as the decrypt_old_ssl keyscript. - Remove debian/TODO, didn't have any useful content anyway. - Fix section ''9. The decrypt_derived keyscript'': Add swap option to the example line for crypttab and other minor fixes. Thanks to Helmut Grohne [EMAIL PROTECTED]. (closes: #491867) * urgency=medium since important (#492451) and security (#477203) bugs get fixed by this upload. -- Jonas Meurer [EMAIL PROTECTED] Mon, 28 Jul 2008 00:21:44 +0200 cryptsetup (2:1.0.6-3) unstable; urgency=low [ Jonas Meurer ] * Fix cryptdisks.functions to actually recognize the noauto option. Thanks to Christian Pernegger [EMAIL PROTECTED] (closes: #483882) * Update patches/02_manpage.patch to fix two more typos, thanks to Bruno Barrera Yever [EMAIL PROTECTED] (closes: #476624) and to remove a duplicate sentence. * Rephrase Enter password for $crypttarget to Enter password to unlock the disk $cryptsource ($crypttarget) in initramfs/cryptroot.script. * Bump Standards-Version to 3.8.0: - Add a README.source which references /usr/share/doc/quilt/README.source. - Add support for debian build option parallel=n to debian/rules. * Add a udev rules file to ignore temporary-cryptsetup-* devices, as suggested in bug #467200. Thanks to Sam Morris [EMAIL PROTECTED]. * Transform debian/copyright into machine-readable code as proposed in http://wiki.debian.org/Proposals/CopyrightFormat. Update and add several copyright notices. * Change reference to docbook xml v4.2 driver file from an online version to a local one in the manpage files, as the build process should not depend on internet access. Add docbook-xml to build-depends. Thanks to Lucas Nussbaum [EMAIL PROTECTED]. (closes: #487056) [ David Härdeman ] * Hopefully fix askpass to properly handle console and usplash input (closes: #477203) * Clarify crypttab manpage (closes: #487246) * Make regex work if keyfile has extended attributes, https://launchpad.net/bugs/231339 (closes: #488131) * Support comments in options part of crypttab (closes: #488128) -- Jonas Meurer [EMAIL PROTECTED] Mon, 07 Jul 2008 00:30:07 +0200 cryptsetup (2:1.0.6-2) unstable; urgency=low [ Jonas Meurer ] * Taken from ubuntu: - debian/scripts/luksformat: Use 256 bit key size by default. (LP: #78508) - debian/patches/02_manpage.patch: Clarify default key sizes (128 for luksFormat and 256 for create) in cryptsetup.8. (side-note in LP #78508) *
Bug#491813: Acknowledgement ([lenny][i386][hd-media][20080721] fails to boot)
Hi Jeremy [ for some reason I did not get an email with your question, only the bug did... Should I have gotten one if you sent mail just to the bug? This may have been a transitory problem in our email system. ] Is this also the last message you see when using Expert Installation? Yes, this is. I see loading linux. loading initrd.gz.. ..ready. Then I would normally see boot messages from the kernel, and (even with the quiet option on) see a delay of a few seconds. What happened instead is that the _instant_ the 'ready.' string appears, the system went back to the start of the BIOS boot sequence. I tried a more recent image, http://people.debian.org/~joeyh/d-i/images/daily/hd-media/boot.img.gz md5: 355a9e6eee8abd27f6a5eb2e314622f7 http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso (dated Sat Jul 26 09:30:29 UTC 2008, not exactly the same as boot.img.gz) md5: 7863f1046be6383363e50b61bfd01f49 This works correctly, ie the installer is able to boot and I get as far as the network card configuration screen[1]. This is true whether I use the standard install item from the splash screen, the graphical item, or the advanced options-expert install. So I think this particular bug has been fixed and can be closed. Thanks for your followup. Vince [1] I still get stuck there, but it is sooo nice to have a sensible question about loading the missing firmware! Great job! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Please unblock cdebootstrap, devmapper, lvm2 and s390-tools
Please unblock cdebootstrap/0.5.3, devmapper/2:1.02.27-3, lvm2/2.02.39-2 and s390-tools/1.6.2-1. Bastian -- We have phasers, I vote we blast 'em! -- Bailey, The Corbomite Maneuver, stardate 1514.2 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processing of linux-kernel-di-arm-2.6_1.26_multi.changes
linux-kernel-di-arm-2.6_1.26_multi.changes uploaded successfully to localhost along with the files: usb-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb jffs2-modules-2.6.25-2-orion5x-di_1.26_arm.udeb pata-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb crc-modules-2.6.25-2-orion5x-di_1.26_arm.udeb kernel-image-2.6.25-2-iop32x-di_1.26_arm.udeb sata-modules-2.6.25-2-orion5x-di_1.26_arm.udeb core-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb crypto-dm-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb nls-core-modules-2.6.25-2-iop32x-di_1.26_arm.udeb reiserfs-modules-2.6.25-2-footbridge-di_1.26_arm.udeb multipath-modules-2.6.25-2-footbridge-di_1.26_arm.udeb scsi-core-modules-2.6.25-2-iop32x-di_1.26_arm.udeb reiserfs-modules-2.6.25-2-iop32x-di_1.26_arm.udeb ext2-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb crc-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb nic-shared-modules-2.6.25-2-footbridge-di_1.26_arm.udeb usb-modules-2.6.25-2-orion5x-di_1.26_arm.udeb input-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb usb-modules-2.6.25-2-footbridge-di_1.26_arm.udeb ext2-modules-2.6.25-2-iop32x-di_1.26_arm.udeb kernel-image-2.6.25-2-ixp4xx-di_1.26_arm.udeb crypto-core-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb kernel-image-2.6.25-2-orion5x-di_1.26_arm.udeb crypto-core-modules-2.6.25-2-orion5x-di_1.26_arm.udeb reiserfs-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb nic-usb-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb crypto-modules-2.6.25-2-iop32x-di_1.26_arm.udeb usb-storage-modules-2.6.25-2-footbridge-di_1.26_arm.udeb nic-modules-2.6.25-2-iop32x-di_1.26_arm.udeb loop-modules-2.6.25-2-iop32x-di_1.26_arm.udeb fat-modules-2.6.25-2-iop32x-di_1.26_arm.udeb usb-storage-modules-2.6.25-2-iop32x-di_1.26_arm.udeb crypto-dm-modules-2.6.25-2-iop32x-di_1.26_arm.udeb ata-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb sata-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb multipath-modules-2.6.25-2-iop32x-di_1.26_arm.udeb reiserfs-modules-2.6.25-2-orion5x-di_1.26_arm.udeb loop-modules-2.6.25-2-footbridge-di_1.26_arm.udeb md-modules-2.6.25-2-footbridge-di_1.26_arm.udeb linux-kernel-di-arm-2.6_1.26.dsc crypto-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb crypto-core-modules-2.6.25-2-footbridge-di_1.26_arm.udeb fat-modules-2.6.25-2-footbridge-di_1.26_arm.udeb input-modules-2.6.25-2-orion5x-di_1.26_arm.udeb usb-modules-2.6.25-2-iop32x-di_1.26_arm.udeb isofs-modules-2.6.25-2-footbridge-di_1.26_arm.udeb loop-modules-2.6.25-2-orion5x-di_1.26_arm.udeb isofs-modules-2.6.25-2-iop32x-di_1.26_arm.udeb crypto-modules-2.6.25-2-orion5x-di_1.26_arm.udeb md-modules-2.6.25-2-orion5x-di_1.26_arm.udeb core-modules-2.6.25-2-orion5x-di_1.26_arm.udeb usb-storage-modules-2.6.25-2-orion5x-di_1.26_arm.udeb multipath-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb nic-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb usb-storage-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb ext3-modules-2.6.25-2-iop32x-di_1.26_arm.udeb ide-core-modules-2.6.25-2-iop32x-di_1.26_arm.udeb ide-modules-2.6.25-2-footbridge-di_1.26_arm.udeb crypto-modules-2.6.25-2-footbridge-di_1.26_arm.udeb sata-modules-2.6.25-2-iop32x-di_1.26_arm.udeb ext2-modules-2.6.25-2-orion5x-di_1.26_arm.udeb ext3-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb ide-modules-2.6.25-2-iop32x-di_1.26_arm.udeb core-modules-2.6.25-2-iop32x-di_1.26_arm.udeb crc-modules-2.6.25-2-iop32x-di_1.26_arm.udeb multipath-modules-2.6.25-2-orion5x-di_1.26_arm.udeb nic-shared-modules-2.6.25-2-orion5x-di_1.26_arm.udeb linux-kernel-di-arm-2.6_1.26.tar.gz loop-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb md-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb md-modules-2.6.25-2-iop32x-di_1.26_arm.udeb nic-usb-modules-2.6.25-2-iop32x-di_1.26_arm.udeb cdrom-core-modules-2.6.25-2-iop32x-di_1.26_arm.udeb scsi-core-modules-2.6.25-2-footbridge-di_1.26_arm.udeb crypto-dm-modules-2.6.25-2-orion5x-di_1.26_arm.udeb ext3-modules-2.6.25-2-orion5x-di_1.26_arm.udeb nic-modules-2.6.25-2-orion5x-di_1.26_arm.udeb crypto-core-modules-2.6.25-2-iop32x-di_1.26_arm.udeb nic-usb-modules-2.6.25-2-orion5x-di_1.26_arm.udeb core-modules-2.6.25-2-footbridge-di_1.26_arm.udeb crc-modules-2.6.25-2-footbridge-di_1.26_arm.udeb scsi-core-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb nic-modules-2.6.25-2-footbridge-di_1.26_arm.udeb cdrom-core-modules-2.6.25-2-footbridge-di_1.26_arm.udeb scsi-core-modules-2.6.25-2-orion5x-di_1.26_arm.udeb fat-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb fat-modules-2.6.25-2-orion5x-di_1.26_arm.udeb kernel-image-2.6.25-2-footbridge-di_1.26_arm.udeb crypto-dm-modules-2.6.25-2-footbridge-di_1.26_arm.udeb Greetings, Your Debian queue daemon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processing of linux-kernel-di-amd64-2.6_1.42_amd64.changes
linux-kernel-di-amd64-2.6_1.42_amd64.changes uploaded successfully to localhost along with the files: linux-kernel-di-amd64-2.6_1.42.dsc linux-kernel-di-amd64-2.6_1.42.tar.gz kernel-image-2.6.25-2-amd64-di_1.42_amd64.udeb nic-modules-2.6.25-2-amd64-di_1.42_amd64.udeb nic-extra-modules-2.6.25-2-amd64-di_1.42_amd64.udeb nic-wireless-modules-2.6.25-2-amd64-di_1.42_amd64.udeb nic-shared-modules-2.6.25-2-amd64-di_1.42_amd64.udeb serial-modules-2.6.25-2-amd64-di_1.42_amd64.udeb usb-serial-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ppp-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ide-modules-2.6.25-2-amd64-di_1.42_amd64.udeb pata-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ide-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb cdrom-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb firewire-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb scsi-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb scsi-modules-2.6.25-2-amd64-di_1.42_amd64.udeb scsi-common-modules-2.6.25-2-amd64-di_1.42_amd64.udeb scsi-extra-modules-2.6.25-2-amd64-di_1.42_amd64.udeb plip-modules-2.6.25-2-amd64-di_1.42_amd64.udeb floppy-modules-2.6.25-2-amd64-di_1.42_amd64.udeb loop-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ipv6-modules-2.6.25-2-amd64-di_1.42_amd64.udeb nls-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ext2-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ext3-modules-2.6.25-2-amd64-di_1.42_amd64.udeb isofs-modules-2.6.25-2-amd64-di_1.42_amd64.udeb jfs-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ntfs-modules-2.6.25-2-amd64-di_1.42_amd64.udeb reiserfs-modules-2.6.25-2-amd64-di_1.42_amd64.udeb xfs-modules-2.6.25-2-amd64-di_1.42_amd64.udeb fat-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ufs-modules-2.6.25-2-amd64-di_1.42_amd64.udeb qnx4-modules-2.6.25-2-amd64-di_1.42_amd64.udeb md-modules-2.6.25-2-amd64-di_1.42_amd64.udeb multipath-modules-2.6.25-2-amd64-di_1.42_amd64.udeb usb-modules-2.6.25-2-amd64-di_1.42_amd64.udeb usb-storage-modules-2.6.25-2-amd64-di_1.42_amd64.udeb pcmcia-storage-modules-2.6.25-2-amd64-di_1.42_amd64.udeb fb-modules-2.6.25-2-amd64-di_1.42_amd64.udeb input-modules-2.6.25-2-amd64-di_1.42_amd64.udeb mouse-modules-2.6.25-2-amd64-di_1.42_amd64.udeb irda-modules-2.6.25-2-amd64-di_1.42_amd64.udeb parport-modules-2.6.25-2-amd64-di_1.42_amd64.udeb nic-pcmcia-modules-2.6.25-2-amd64-di_1.42_amd64.udeb pcmcia-modules-2.6.25-2-amd64-di_1.42_amd64.udeb nic-usb-modules-2.6.25-2-amd64-di_1.42_amd64.udeb sata-modules-2.6.25-2-amd64-di_1.42_amd64.udeb core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb acpi-modules-2.6.25-2-amd64-di_1.42_amd64.udeb crc-modules-2.6.25-2-amd64-di_1.42_amd64.udeb crypto-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb crypto-modules-2.6.25-2-amd64-di_1.42_amd64.udeb crypto-dm-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ata-modules-2.6.25-2-amd64-di_1.42_amd64.udeb zlib-modules-2.6.25-2-amd64-di_1.42_amd64.udeb virtio-modules-2.6.25-2-amd64-di_1.42_amd64.udeb Greetings, Your Debian queue daemon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processing of linux-kernel-di-sparc-2.6_1.32_multi.changes
linux-kernel-di-sparc-2.6_1.32_multi.changes uploaded successfully to localhost along with the files: reiserfs-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb usb-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb jfs-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb multipath-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb zlib-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb ide-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb ppp-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb ext3-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb isofs-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb pata-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb xfs-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb ipv6-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb scsi-core-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb crypto-core-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb linux-kernel-di-sparc-2.6_1.32.tar.gz crypto-dm-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb nls-core-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb linux-kernel-di-sparc-2.6_1.32.dsc sata-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb scsi-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb plip-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb crypto-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb md-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb kernel-image-2.6.25-2-sparc64-di_1.32_sparc.udeb scsi-common-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb nic-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb ata-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb fat-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb cdrom-core-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb Greetings, Your Debian queue daemon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processing of linux-kernel-di-mips-2.6_0.28_multi.changes
linux-kernel-di-mips-2.6_0.28_multi.changes uploaded successfully to localhost along with the files: ipv6-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb rtc-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb crypto-dm-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb crypto-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb xfs-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb ppp-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb rtc-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb ipv6-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb scsi-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb usb-storage-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb md-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb input-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb jfs-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb ide-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb scsi-common-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb fb-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb cdrom-core-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb crypto-core-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb scsi-core-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb ipv6-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb jfs-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb sata-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb kernel-image-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb isofs-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb md-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb ipv6-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb input-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb crypto-dm-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb loop-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb multipath-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb scsi-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb jfs-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb md-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb crypto-dm-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb isofs-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb ide-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb kernel-image-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb xfs-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb xfs-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb usb-storage-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb reiserfs-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb sata-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb multipath-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb kernel-image-2.6.25-2-4kc-malta-di_0.28_mips.udeb ide-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb fat-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb loop-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb reiserfs-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb multipath-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb xfs-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb reiserfs-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb scsi-common-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb md-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb sata-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb multipath-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb md-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb usb-storage-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb crypto-dm-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb usb-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb fb-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb kernel-image-2.6.25-2-r4k-ip22-di_0.28_mips.udeb rtc-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb multipath-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb crypto-core-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb reiserfs-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb fat-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb crypto-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb loop-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb crypto-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb crypto-dm-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb loop-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb rtc-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb linux-kernel-di-mips-2.6_0.28.dsc crypto-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb usb-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb isofs-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb cdrom-core-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb input-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb scsi-core-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb fat-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb crypto-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb xfs-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb jfs-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb cdrom-core-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb reiserfs-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb loop-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb ipv6-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb jfs-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb
Processing of linux-kernel-di-hppa-2.6_1.27_multi.changes
linux-kernel-di-hppa-2.6_1.27_multi.changes uploaded successfully to localhost along with the files: crypto-core-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb ipv6-modules-2.6.25-2-parisc-di_1.27_hppa.udeb crypto-dm-modules-2.6.25-2-parisc-di_1.27_hppa.udeb ide-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb nic-modules-2.6.25-2-parisc-di_1.27_hppa.udeb ppp-modules-2.6.25-2-parisc-di_1.27_hppa.udeb usb-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb multipath-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb cdrom-core-modules-2.6.25-2-parisc-di_1.27_hppa.udeb ext3-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb scsi-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb crypto-modules-2.6.25-2-parisc-di_1.27_hppa.udeb input-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb ext3-modules-2.6.25-2-parisc-di_1.27_hppa.udeb usb-storage-modules-2.6.25-2-parisc-di_1.27_hppa.udeb crypto-core-modules-2.6.25-2-parisc-di_1.27_hppa.udeb loop-modules-2.6.25-2-parisc-di_1.27_hppa.udeb crypto-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb md-modules-2.6.25-2-parisc-di_1.27_hppa.udeb scsi-modules-2.6.25-2-parisc-di_1.27_hppa.udeb cdrom-core-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb ide-modules-2.6.25-2-parisc-di_1.27_hppa.udeb ipv6-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb ppp-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb usb-storage-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb loop-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb crypto-dm-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb kernel-image-2.6.25-2-parisc-di_1.27_hppa.udeb multipath-modules-2.6.25-2-parisc-di_1.27_hppa.udeb input-modules-2.6.25-2-parisc-di_1.27_hppa.udeb usb-modules-2.6.25-2-parisc-di_1.27_hppa.udeb nic-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb md-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb linux-kernel-di-hppa-2.6_1.27.tar.gz linux-kernel-di-hppa-2.6_1.27.dsc kernel-image-2.6.25-2-parisc64-di_1.27_hppa.udeb Greetings, Your Debian queue daemon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processing of linux-kernel-di-armel-2.6_1.18_multi.changes
linux-kernel-di-armel-2.6_1.18_multi.changes uploaded successfully to localhost along with the files: kernel-image-2.6.25-2-ixp4xx-di_1.18_armel.udeb crypto-core-modules-2.6.25-2-iop32x-di_1.18_armel.udeb jffs2-modules-2.6.25-2-orion5x-di_1.18_armel.udeb core-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb reiserfs-modules-2.6.25-2-orion5x-di_1.18_armel.udeb md-modules-2.6.25-2-versatile-di_1.18_armel.udeb multipath-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb reiserfs-modules-2.6.25-2-iop32x-di_1.18_armel.udeb usb-modules-2.6.25-2-iop32x-di_1.18_armel.udeb sata-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb input-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb crypto-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb kernel-image-2.6.25-2-orion5x-di_1.18_armel.udeb loop-modules-2.6.25-2-versatile-di_1.18_armel.udeb usb-modules-2.6.25-2-versatile-di_1.18_armel.udeb crc-modules-2.6.25-2-versatile-di_1.18_armel.udeb pata-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb cdrom-core-modules-2.6.25-2-iop32x-di_1.18_armel.udeb md-modules-2.6.25-2-orion5x-di_1.18_armel.udeb crypto-core-modules-2.6.25-2-orion5x-di_1.18_armel.udeb crypto-modules-2.6.25-2-iop32x-di_1.18_armel.udeb linux-kernel-di-armel-2.6_1.18.tar.gz reiserfs-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb crc-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb loop-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb multipath-modules-2.6.25-2-versatile-di_1.18_armel.udeb crc-modules-2.6.25-2-iop32x-di_1.18_armel.udeb loop-modules-2.6.25-2-iop32x-di_1.18_armel.udeb fat-modules-2.6.25-2-orion5x-di_1.18_armel.udeb nic-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb crc-modules-2.6.25-2-orion5x-di_1.18_armel.udeb ext3-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb core-modules-2.6.25-2-orion5x-di_1.18_armel.udeb crypto-dm-modules-2.6.25-2-versatile-di_1.18_armel.udeb fat-modules-2.6.25-2-versatile-di_1.18_armel.udeb usb-modules-2.6.25-2-orion5x-di_1.18_armel.udeb core-modules-2.6.25-2-versatile-di_1.18_armel.udeb scsi-core-modules-2.6.25-2-iop32x-di_1.18_armel.udeb nic-usb-modules-2.6.25-2-orion5x-di_1.18_armel.udeb nic-usb-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb usb-storage-modules-2.6.25-2-versatile-di_1.18_armel.udeb sata-modules-2.6.25-2-iop32x-di_1.18_armel.udeb kernel-image-2.6.25-2-iop32x-di_1.18_armel.udeb md-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb multipath-modules-2.6.25-2-iop32x-di_1.18_armel.udeb fat-modules-2.6.25-2-iop32x-di_1.18_armel.udeb linux-kernel-di-armel-2.6_1.18.dsc ext2-modules-2.6.25-2-iop32x-di_1.18_armel.udeb input-modules-2.6.25-2-orion5x-di_1.18_armel.udeb scsi-core-modules-2.6.25-2-orion5x-di_1.18_armel.udeb ext2-modules-2.6.25-2-orion5x-di_1.18_armel.udeb isofs-modules-2.6.25-2-iop32x-di_1.18_armel.udeb nic-shared-modules-2.6.25-2-orion5x-di_1.18_armel.udeb loop-modules-2.6.25-2-orion5x-di_1.18_armel.udeb reiserfs-modules-2.6.25-2-versatile-di_1.18_armel.udeb crypto-core-modules-2.6.25-2-versatile-di_1.18_armel.udeb sata-modules-2.6.25-2-versatile-di_1.18_armel.udeb usb-storage-modules-2.6.25-2-iop32x-di_1.18_armel.udeb ide-modules-2.6.25-2-iop32x-di_1.18_armel.udeb nic-modules-2.6.25-2-iop32x-di_1.18_armel.udeb crypto-core-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb ext3-modules-2.6.25-2-iop32x-di_1.18_armel.udeb multipath-modules-2.6.25-2-orion5x-di_1.18_armel.udeb fat-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb crypto-dm-modules-2.6.25-2-orion5x-di_1.18_armel.udeb ide-core-modules-2.6.25-2-iop32x-di_1.18_armel.udeb usb-storage-modules-2.6.25-2-orion5x-di_1.18_armel.udeb md-modules-2.6.25-2-iop32x-di_1.18_armel.udeb crypto-modules-2.6.25-2-versatile-di_1.18_armel.udeb crypto-dm-modules-2.6.25-2-iop32x-di_1.18_armel.udeb scsi-core-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb usb-storage-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb nic-modules-2.6.25-2-orion5x-di_1.18_armel.udeb ata-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb usb-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb crypto-dm-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb kernel-image-2.6.25-2-versatile-di_1.18_armel.udeb sata-modules-2.6.25-2-orion5x-di_1.18_armel.udeb nls-core-modules-2.6.25-2-iop32x-di_1.18_armel.udeb ext3-modules-2.6.25-2-orion5x-di_1.18_armel.udeb nic-usb-modules-2.6.25-2-versatile-di_1.18_armel.udeb crypto-modules-2.6.25-2-orion5x-di_1.18_armel.udeb nic-usb-modules-2.6.25-2-iop32x-di_1.18_armel.udeb ext2-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb core-modules-2.6.25-2-iop32x-di_1.18_armel.udeb Greetings, Your Debian queue daemon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processing of linux-kernel-di-s390-2.6_0.26_multi.changes
linux-kernel-di-s390-2.6_0.26_multi.changes uploaded successfully to localhost along with the files: linux-kernel-di-s390-2.6_0.26.dsc dasd-modules-2.6.25-2-s390-di_0.26_s390.udeb md-modules-2.6.25-2-s390-di_0.26_s390.udeb scsi-core-modules-2.6.25-2-s390-di_0.26_s390.udeb crypto-core-modules-2.6.25-2-s390-di_0.26_s390.udeb scsi-modules-2.6.25-2-s390-di_0.26_s390.udeb fat-modules-2.6.25-2-s390-di_0.26_s390.udeb ext3-modules-2.6.25-2-s390-di_0.26_s390.udeb xfs-modules-2.6.25-2-s390-di_0.26_s390.udeb nic-modules-2.6.25-2-s390-di_0.26_s390.udeb core-modules-2.6.25-2-s390-di_0.26_s390.udeb kernel-image-2.6.25-2-s390-tape-di_0.26_s390.udeb ext2-modules-2.6.25-2-s390-di_0.26_s390.udeb linux-kernel-di-s390-2.6_0.26.tar.gz multipath-modules-2.6.25-2-s390-di_0.26_s390.udeb crypto-modules-2.6.25-2-s390-di_0.26_s390.udeb crypto-dm-modules-2.6.25-2-s390-di_0.26_s390.udeb kernel-image-2.6.25-2-s390-di_0.26_s390.udeb Greetings, Your Debian queue daemon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processing of linux-kernel-di-ia64-2.6_1.31_multi.changes
linux-kernel-di-ia64-2.6_1.31_multi.changes uploaded successfully to localhost along with the files: ntfs-modules-2.6.25-2-itanium-di_1.31_ia64.udeb nic-usb-modules-2.6.25-2-itanium-di_1.31_ia64.udeb xfs-modules-2.6.25-2-itanium-di_1.31_ia64.udeb nic-modules-2.6.25-2-itanium-di_1.31_ia64.udeb nls-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb ufs-modules-2.6.25-2-itanium-di_1.31_ia64.udeb scsi-modules-2.6.25-2-itanium-di_1.31_ia64.udeb multipath-modules-2.6.25-2-itanium-di_1.31_ia64.udeb ide-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb zlib-modules-2.6.25-2-itanium-di_1.31_ia64.udeb scsi-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb input-modules-2.6.25-2-itanium-di_1.31_ia64.udeb firewire-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb isofs-modules-2.6.25-2-itanium-di_1.31_ia64.udeb loop-modules-2.6.25-2-itanium-di_1.31_ia64.udeb cdrom-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb md-modules-2.6.25-2-itanium-di_1.31_ia64.udeb ext3-modules-2.6.25-2-itanium-di_1.31_ia64.udeb linux-kernel-di-ia64-2.6_1.31.tar.gz linux-kernel-di-ia64-2.6_1.31.dsc efi-modules-2.6.25-2-itanium-di_1.31_ia64.udeb fat-modules-2.6.25-2-itanium-di_1.31_ia64.udeb core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb crypto-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb pcmcia-modules-2.6.25-2-itanium-di_1.31_ia64.udeb jfs-modules-2.6.25-2-itanium-di_1.31_ia64.udeb crc-modules-2.6.25-2-itanium-di_1.31_ia64.udeb mouse-modules-2.6.25-2-itanium-di_1.31_ia64.udeb serial-modules-2.6.25-2-itanium-di_1.31_ia64.udeb kernel-image-2.6.25-2-itanium-di_1.31_ia64.udeb crypto-dm-modules-2.6.25-2-itanium-di_1.31_ia64.udeb ppp-modules-2.6.25-2-itanium-di_1.31_ia64.udeb usb-modules-2.6.25-2-itanium-di_1.31_ia64.udeb sata-modules-2.6.25-2-itanium-di_1.31_ia64.udeb nic-shared-modules-2.6.25-2-itanium-di_1.31_ia64.udeb parport-modules-2.6.25-2-itanium-di_1.31_ia64.udeb ide-modules-2.6.25-2-itanium-di_1.31_ia64.udeb reiserfs-modules-2.6.25-2-itanium-di_1.31_ia64.udeb ipv6-modules-2.6.25-2-itanium-di_1.31_ia64.udeb sn-modules-2.6.25-2-itanium-di_1.31_ia64.udeb irda-modules-2.6.25-2-itanium-di_1.31_ia64.udeb fb-modules-2.6.25-2-itanium-di_1.31_ia64.udeb ata-modules-2.6.25-2-itanium-di_1.31_ia64.udeb plip-modules-2.6.25-2-itanium-di_1.31_ia64.udeb usb-storage-modules-2.6.25-2-itanium-di_1.31_ia64.udeb crypto-modules-2.6.25-2-itanium-di_1.31_ia64.udeb Greetings, Your Debian queue daemon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processing of linux-kernel-di-mipsel-2.6_0.28_multi.changes
linux-kernel-di-mipsel-2.6_0.28_multi.changes uploaded successfully to localhost along with the files: ide-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb md-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb md-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb scsi-core-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb crypto-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb jfs-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb usb-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb rtc-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb cdrom-core-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb ipv6-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb kernel-image-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb ppp-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb reiserfs-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb usb-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb ipv6-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb input-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb kernel-image-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb ipv6-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb jfs-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb input-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb linux-kernel-di-mipsel-2.6_0.28.dsc nls-core-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb scsi-common-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb fat-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb xfs-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb kernel-image-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb ipv6-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb cdrom-core-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb multipath-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb loop-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb scsi-common-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb multipath-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb input-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb ppp-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb crypto-dm-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb usb-storage-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb fb-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb multipath-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb crypto-core-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb jfs-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb crypto-core-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb loop-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb isofs-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb scsi-core-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb cdrom-core-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb crypto-core-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb cdrom-core-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb crypto-dm-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb usb-storage-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb rtc-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb crypto-dm-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb sata-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb xfs-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb fb-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb ide-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb ppp-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb reiserfs-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb crypto-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb loop-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb kernel-image-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb crypto-dm-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb multipath-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb crypto-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb sata-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb scsi-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb ide-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb reiserfs-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb ppp-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb isofs-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb linux-kernel-di-mipsel-2.6_0.28.tar.gz usb-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb scsi-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb usb-storage-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb jfs-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb sata-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb md-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb fat-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb crypto-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb fat-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb reiserfs-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb nfs-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb fat-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb loop-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb xfs-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb
linux-kernel-di-hppa-2.6_1.27_multi.changes ACCEPTED
Accepted: cdrom-core-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/cdrom-core-modules-2.6.25-2-parisc-di_1.27_hppa.udeb cdrom-core-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/cdrom-core-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb crypto-core-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/crypto-core-modules-2.6.25-2-parisc-di_1.27_hppa.udeb crypto-core-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/crypto-core-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb crypto-dm-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/crypto-dm-modules-2.6.25-2-parisc-di_1.27_hppa.udeb crypto-dm-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/crypto-dm-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb crypto-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/crypto-modules-2.6.25-2-parisc-di_1.27_hppa.udeb crypto-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/crypto-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb ext3-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/ext3-modules-2.6.25-2-parisc-di_1.27_hppa.udeb ext3-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/ext3-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb ide-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/ide-modules-2.6.25-2-parisc-di_1.27_hppa.udeb ide-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/ide-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb input-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/input-modules-2.6.25-2-parisc-di_1.27_hppa.udeb input-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/input-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb ipv6-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/ipv6-modules-2.6.25-2-parisc-di_1.27_hppa.udeb ipv6-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/ipv6-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb kernel-image-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/kernel-image-2.6.25-2-parisc-di_1.27_hppa.udeb kernel-image-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/kernel-image-2.6.25-2-parisc64-di_1.27_hppa.udeb linux-kernel-di-hppa-2.6_1.27.dsc to pool/main/l/linux-kernel-di-hppa-2.6/linux-kernel-di-hppa-2.6_1.27.dsc linux-kernel-di-hppa-2.6_1.27.tar.gz to pool/main/l/linux-kernel-di-hppa-2.6/linux-kernel-di-hppa-2.6_1.27.tar.gz loop-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/loop-modules-2.6.25-2-parisc-di_1.27_hppa.udeb loop-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/loop-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb md-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/md-modules-2.6.25-2-parisc-di_1.27_hppa.udeb md-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/md-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb multipath-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/multipath-modules-2.6.25-2-parisc-di_1.27_hppa.udeb multipath-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/multipath-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb nic-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/nic-modules-2.6.25-2-parisc-di_1.27_hppa.udeb nic-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/nic-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb ppp-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/ppp-modules-2.6.25-2-parisc-di_1.27_hppa.udeb ppp-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/ppp-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb scsi-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/scsi-modules-2.6.25-2-parisc-di_1.27_hppa.udeb scsi-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/scsi-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb usb-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/usb-modules-2.6.25-2-parisc-di_1.27_hppa.udeb usb-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/usb-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb usb-storage-modules-2.6.25-2-parisc-di_1.27_hppa.udeb to pool/main/l/linux-kernel-di-hppa-2.6/usb-storage-modules-2.6.25-2-parisc-di_1.27_hppa.udeb usb-storage-modules-2.6.25-2-parisc64-di_1.27_hppa.udeb to
linux-kernel-di-s390-2.6_0.26_multi.changes ACCEPTED
Accepted: core-modules-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/core-modules-2.6.25-2-s390-di_0.26_s390.udeb crypto-core-modules-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/crypto-core-modules-2.6.25-2-s390-di_0.26_s390.udeb crypto-dm-modules-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/crypto-dm-modules-2.6.25-2-s390-di_0.26_s390.udeb crypto-modules-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/crypto-modules-2.6.25-2-s390-di_0.26_s390.udeb dasd-modules-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/dasd-modules-2.6.25-2-s390-di_0.26_s390.udeb ext2-modules-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/ext2-modules-2.6.25-2-s390-di_0.26_s390.udeb ext3-modules-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/ext3-modules-2.6.25-2-s390-di_0.26_s390.udeb fat-modules-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/fat-modules-2.6.25-2-s390-di_0.26_s390.udeb kernel-image-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/kernel-image-2.6.25-2-s390-di_0.26_s390.udeb kernel-image-2.6.25-2-s390-tape-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/kernel-image-2.6.25-2-s390-tape-di_0.26_s390.udeb linux-kernel-di-s390-2.6_0.26.dsc to pool/main/l/linux-kernel-di-s390-2.6/linux-kernel-di-s390-2.6_0.26.dsc linux-kernel-di-s390-2.6_0.26.tar.gz to pool/main/l/linux-kernel-di-s390-2.6/linux-kernel-di-s390-2.6_0.26.tar.gz md-modules-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/md-modules-2.6.25-2-s390-di_0.26_s390.udeb multipath-modules-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/multipath-modules-2.6.25-2-s390-di_0.26_s390.udeb nic-modules-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/nic-modules-2.6.25-2-s390-di_0.26_s390.udeb scsi-core-modules-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/scsi-core-modules-2.6.25-2-s390-di_0.26_s390.udeb scsi-modules-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/scsi-modules-2.6.25-2-s390-di_0.26_s390.udeb xfs-modules-2.6.25-2-s390-di_0.26_s390.udeb to pool/main/l/linux-kernel-di-s390-2.6/xfs-modules-2.6.25-2-s390-di_0.26_s390.udeb Override entries for your package: core-modules-2.6.25-2-s390-di_0.26_s390.udeb - standard debian-installer crypto-core-modules-2.6.25-2-s390-di_0.26_s390.udeb - extra debian-installer crypto-dm-modules-2.6.25-2-s390-di_0.26_s390.udeb - extra debian-installer crypto-modules-2.6.25-2-s390-di_0.26_s390.udeb - extra debian-installer dasd-modules-2.6.25-2-s390-di_0.26_s390.udeb - standard debian-installer ext2-modules-2.6.25-2-s390-di_0.26_s390.udeb - standard debian-installer ext3-modules-2.6.25-2-s390-di_0.26_s390.udeb - standard debian-installer fat-modules-2.6.25-2-s390-di_0.26_s390.udeb - extra debian-installer kernel-image-2.6.25-2-s390-di_0.26_s390.udeb - extra debian-installer kernel-image-2.6.25-2-s390-tape-di_0.26_s390.udeb - extra debian-installer linux-kernel-di-s390-2.6_0.26.dsc - source misc md-modules-2.6.25-2-s390-di_0.26_s390.udeb - extra debian-installer multipath-modules-2.6.25-2-s390-di_0.26_s390.udeb - extra debian-installer nic-modules-2.6.25-2-s390-di_0.26_s390.udeb - standard debian-installer scsi-core-modules-2.6.25-2-s390-di_0.26_s390.udeb - standard debian-installer scsi-modules-2.6.25-2-s390-di_0.26_s390.udeb - standard debian-installer xfs-modules-2.6.25-2-s390-di_0.26_s390.udeb - standard debian-installer Announcing to [EMAIL PROTECTED] Closing bugs: 490562 Thank you for your contribution to Debian. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
linux-kernel-di-mipsel-2.6_0.28_multi.changes ACCEPTED
Accepted: cdrom-core-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/cdrom-core-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb cdrom-core-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/cdrom-core-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb cdrom-core-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/cdrom-core-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb cdrom-core-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/cdrom-core-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb crypto-core-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-core-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb crypto-core-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-core-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb crypto-core-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-core-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb crypto-dm-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-dm-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb crypto-dm-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-dm-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb crypto-dm-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-dm-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb crypto-dm-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-dm-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb crypto-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb crypto-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb crypto-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb crypto-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/crypto-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb fat-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/fat-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb fat-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/fat-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb fat-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/fat-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb fat-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/fat-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb fb-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/fb-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb fb-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/fb-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb ide-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/ide-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb ide-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/ide-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb ide-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/ide-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb input-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/input-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb input-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/input-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb input-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/input-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb ipv6-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/ipv6-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb ipv6-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/ipv6-modules-2.6.25-2-r5k-cobalt-di_0.28_mipsel.udeb ipv6-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/ipv6-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mipsel.udeb ipv6-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb to pool/main/l/linux-kernel-di-mipsel-2.6/ipv6-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mipsel.udeb isofs-modules-2.6.25-2-4kc-malta-di_0.28_mipsel.udeb to
linux-kernel-di-armel-2.6_1.18_multi.changes ACCEPTED
Accepted: ata-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/ata-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb cdrom-core-modules-2.6.25-2-iop32x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/cdrom-core-modules-2.6.25-2-iop32x-di_1.18_armel.udeb core-modules-2.6.25-2-iop32x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/core-modules-2.6.25-2-iop32x-di_1.18_armel.udeb core-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/core-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb core-modules-2.6.25-2-orion5x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/core-modules-2.6.25-2-orion5x-di_1.18_armel.udeb core-modules-2.6.25-2-versatile-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/core-modules-2.6.25-2-versatile-di_1.18_armel.udeb crc-modules-2.6.25-2-iop32x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crc-modules-2.6.25-2-iop32x-di_1.18_armel.udeb crc-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crc-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb crc-modules-2.6.25-2-orion5x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crc-modules-2.6.25-2-orion5x-di_1.18_armel.udeb crc-modules-2.6.25-2-versatile-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crc-modules-2.6.25-2-versatile-di_1.18_armel.udeb crypto-core-modules-2.6.25-2-iop32x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crypto-core-modules-2.6.25-2-iop32x-di_1.18_armel.udeb crypto-core-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crypto-core-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb crypto-core-modules-2.6.25-2-orion5x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crypto-core-modules-2.6.25-2-orion5x-di_1.18_armel.udeb crypto-core-modules-2.6.25-2-versatile-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crypto-core-modules-2.6.25-2-versatile-di_1.18_armel.udeb crypto-dm-modules-2.6.25-2-iop32x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crypto-dm-modules-2.6.25-2-iop32x-di_1.18_armel.udeb crypto-dm-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crypto-dm-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb crypto-dm-modules-2.6.25-2-orion5x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crypto-dm-modules-2.6.25-2-orion5x-di_1.18_armel.udeb crypto-dm-modules-2.6.25-2-versatile-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crypto-dm-modules-2.6.25-2-versatile-di_1.18_armel.udeb crypto-modules-2.6.25-2-iop32x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crypto-modules-2.6.25-2-iop32x-di_1.18_armel.udeb crypto-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crypto-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb crypto-modules-2.6.25-2-orion5x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crypto-modules-2.6.25-2-orion5x-di_1.18_armel.udeb crypto-modules-2.6.25-2-versatile-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/crypto-modules-2.6.25-2-versatile-di_1.18_armel.udeb ext2-modules-2.6.25-2-iop32x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/ext2-modules-2.6.25-2-iop32x-di_1.18_armel.udeb ext2-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/ext2-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb ext2-modules-2.6.25-2-orion5x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/ext2-modules-2.6.25-2-orion5x-di_1.18_armel.udeb ext3-modules-2.6.25-2-iop32x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/ext3-modules-2.6.25-2-iop32x-di_1.18_armel.udeb ext3-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/ext3-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb ext3-modules-2.6.25-2-orion5x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/ext3-modules-2.6.25-2-orion5x-di_1.18_armel.udeb fat-modules-2.6.25-2-iop32x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/fat-modules-2.6.25-2-iop32x-di_1.18_armel.udeb fat-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/fat-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb fat-modules-2.6.25-2-orion5x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/fat-modules-2.6.25-2-orion5x-di_1.18_armel.udeb fat-modules-2.6.25-2-versatile-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/fat-modules-2.6.25-2-versatile-di_1.18_armel.udeb ide-core-modules-2.6.25-2-iop32x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/ide-core-modules-2.6.25-2-iop32x-di_1.18_armel.udeb ide-modules-2.6.25-2-iop32x-di_1.18_armel.udeb to pool/main/l/linux-kernel-di-armel-2.6/ide-modules-2.6.25-2-iop32x-di_1.18_armel.udeb input-modules-2.6.25-2-ixp4xx-di_1.18_armel.udeb to
linux-kernel-di-ia64-2.6_1.31_multi.changes ACCEPTED
Accepted: ata-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/ata-modules-2.6.25-2-itanium-di_1.31_ia64.udeb cdrom-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/cdrom-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb crc-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/crc-modules-2.6.25-2-itanium-di_1.31_ia64.udeb crypto-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/crypto-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb crypto-dm-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/crypto-dm-modules-2.6.25-2-itanium-di_1.31_ia64.udeb crypto-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/crypto-modules-2.6.25-2-itanium-di_1.31_ia64.udeb efi-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/efi-modules-2.6.25-2-itanium-di_1.31_ia64.udeb ext3-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/ext3-modules-2.6.25-2-itanium-di_1.31_ia64.udeb fat-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/fat-modules-2.6.25-2-itanium-di_1.31_ia64.udeb fb-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/fb-modules-2.6.25-2-itanium-di_1.31_ia64.udeb firewire-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/firewire-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb ide-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/ide-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb ide-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/ide-modules-2.6.25-2-itanium-di_1.31_ia64.udeb input-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/input-modules-2.6.25-2-itanium-di_1.31_ia64.udeb ipv6-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/ipv6-modules-2.6.25-2-itanium-di_1.31_ia64.udeb irda-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/irda-modules-2.6.25-2-itanium-di_1.31_ia64.udeb isofs-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/isofs-modules-2.6.25-2-itanium-di_1.31_ia64.udeb jfs-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/jfs-modules-2.6.25-2-itanium-di_1.31_ia64.udeb kernel-image-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/kernel-image-2.6.25-2-itanium-di_1.31_ia64.udeb linux-kernel-di-ia64-2.6_1.31.dsc to pool/main/l/linux-kernel-di-ia64-2.6/linux-kernel-di-ia64-2.6_1.31.dsc linux-kernel-di-ia64-2.6_1.31.tar.gz to pool/main/l/linux-kernel-di-ia64-2.6/linux-kernel-di-ia64-2.6_1.31.tar.gz loop-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/loop-modules-2.6.25-2-itanium-di_1.31_ia64.udeb md-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/md-modules-2.6.25-2-itanium-di_1.31_ia64.udeb mouse-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/mouse-modules-2.6.25-2-itanium-di_1.31_ia64.udeb multipath-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/multipath-modules-2.6.25-2-itanium-di_1.31_ia64.udeb nic-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/nic-modules-2.6.25-2-itanium-di_1.31_ia64.udeb nic-shared-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/nic-shared-modules-2.6.25-2-itanium-di_1.31_ia64.udeb nic-usb-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/nic-usb-modules-2.6.25-2-itanium-di_1.31_ia64.udeb nls-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/nls-core-modules-2.6.25-2-itanium-di_1.31_ia64.udeb ntfs-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/ntfs-modules-2.6.25-2-itanium-di_1.31_ia64.udeb parport-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/parport-modules-2.6.25-2-itanium-di_1.31_ia64.udeb pcmcia-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/pcmcia-modules-2.6.25-2-itanium-di_1.31_ia64.udeb plip-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/plip-modules-2.6.25-2-itanium-di_1.31_ia64.udeb ppp-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to pool/main/l/linux-kernel-di-ia64-2.6/ppp-modules-2.6.25-2-itanium-di_1.31_ia64.udeb reiserfs-modules-2.6.25-2-itanium-di_1.31_ia64.udeb to
linux-kernel-di-amd64-2.6_1.42_amd64.changes ACCEPTED
Accepted: acpi-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/acpi-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ata-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/ata-modules-2.6.25-2-amd64-di_1.42_amd64.udeb cdrom-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/cdrom-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb crc-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/crc-modules-2.6.25-2-amd64-di_1.42_amd64.udeb crypto-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/crypto-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb crypto-dm-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/crypto-dm-modules-2.6.25-2-amd64-di_1.42_amd64.udeb crypto-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/crypto-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ext2-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/ext2-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ext3-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/ext3-modules-2.6.25-2-amd64-di_1.42_amd64.udeb fat-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/fat-modules-2.6.25-2-amd64-di_1.42_amd64.udeb fb-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/fb-modules-2.6.25-2-amd64-di_1.42_amd64.udeb firewire-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/firewire-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb floppy-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/floppy-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ide-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/ide-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ide-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/ide-modules-2.6.25-2-amd64-di_1.42_amd64.udeb input-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/input-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ipv6-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/ipv6-modules-2.6.25-2-amd64-di_1.42_amd64.udeb irda-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/irda-modules-2.6.25-2-amd64-di_1.42_amd64.udeb isofs-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/isofs-modules-2.6.25-2-amd64-di_1.42_amd64.udeb jfs-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/jfs-modules-2.6.25-2-amd64-di_1.42_amd64.udeb kernel-image-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/kernel-image-2.6.25-2-amd64-di_1.42_amd64.udeb linux-kernel-di-amd64-2.6_1.42.dsc to pool/main/l/linux-kernel-di-amd64-2.6/linux-kernel-di-amd64-2.6_1.42.dsc linux-kernel-di-amd64-2.6_1.42.tar.gz to pool/main/l/linux-kernel-di-amd64-2.6/linux-kernel-di-amd64-2.6_1.42.tar.gz loop-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/loop-modules-2.6.25-2-amd64-di_1.42_amd64.udeb md-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/md-modules-2.6.25-2-amd64-di_1.42_amd64.udeb mouse-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/mouse-modules-2.6.25-2-amd64-di_1.42_amd64.udeb multipath-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/multipath-modules-2.6.25-2-amd64-di_1.42_amd64.udeb nic-extra-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/nic-extra-modules-2.6.25-2-amd64-di_1.42_amd64.udeb nic-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/nic-modules-2.6.25-2-amd64-di_1.42_amd64.udeb nic-pcmcia-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/nic-pcmcia-modules-2.6.25-2-amd64-di_1.42_amd64.udeb nic-shared-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/nic-shared-modules-2.6.25-2-amd64-di_1.42_amd64.udeb nic-usb-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/nic-usb-modules-2.6.25-2-amd64-di_1.42_amd64.udeb nic-wireless-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/nic-wireless-modules-2.6.25-2-amd64-di_1.42_amd64.udeb nls-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to pool/main/l/linux-kernel-di-amd64-2.6/nls-core-modules-2.6.25-2-amd64-di_1.42_amd64.udeb ntfs-modules-2.6.25-2-amd64-di_1.42_amd64.udeb to
linux-kernel-di-arm-2.6_1.26_multi.changes ACCEPTED
Accepted: ata-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/ata-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb cdrom-core-modules-2.6.25-2-footbridge-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/cdrom-core-modules-2.6.25-2-footbridge-di_1.26_arm.udeb cdrom-core-modules-2.6.25-2-iop32x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/cdrom-core-modules-2.6.25-2-iop32x-di_1.26_arm.udeb core-modules-2.6.25-2-footbridge-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/core-modules-2.6.25-2-footbridge-di_1.26_arm.udeb core-modules-2.6.25-2-iop32x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/core-modules-2.6.25-2-iop32x-di_1.26_arm.udeb core-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/core-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb core-modules-2.6.25-2-orion5x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/core-modules-2.6.25-2-orion5x-di_1.26_arm.udeb crc-modules-2.6.25-2-footbridge-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crc-modules-2.6.25-2-footbridge-di_1.26_arm.udeb crc-modules-2.6.25-2-iop32x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crc-modules-2.6.25-2-iop32x-di_1.26_arm.udeb crc-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crc-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb crc-modules-2.6.25-2-orion5x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crc-modules-2.6.25-2-orion5x-di_1.26_arm.udeb crypto-core-modules-2.6.25-2-footbridge-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crypto-core-modules-2.6.25-2-footbridge-di_1.26_arm.udeb crypto-core-modules-2.6.25-2-iop32x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crypto-core-modules-2.6.25-2-iop32x-di_1.26_arm.udeb crypto-core-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crypto-core-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb crypto-core-modules-2.6.25-2-orion5x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crypto-core-modules-2.6.25-2-orion5x-di_1.26_arm.udeb crypto-dm-modules-2.6.25-2-footbridge-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crypto-dm-modules-2.6.25-2-footbridge-di_1.26_arm.udeb crypto-dm-modules-2.6.25-2-iop32x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crypto-dm-modules-2.6.25-2-iop32x-di_1.26_arm.udeb crypto-dm-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crypto-dm-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb crypto-dm-modules-2.6.25-2-orion5x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crypto-dm-modules-2.6.25-2-orion5x-di_1.26_arm.udeb crypto-modules-2.6.25-2-footbridge-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crypto-modules-2.6.25-2-footbridge-di_1.26_arm.udeb crypto-modules-2.6.25-2-iop32x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crypto-modules-2.6.25-2-iop32x-di_1.26_arm.udeb crypto-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crypto-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb crypto-modules-2.6.25-2-orion5x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/crypto-modules-2.6.25-2-orion5x-di_1.26_arm.udeb ext2-modules-2.6.25-2-iop32x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/ext2-modules-2.6.25-2-iop32x-di_1.26_arm.udeb ext2-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/ext2-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb ext2-modules-2.6.25-2-orion5x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/ext2-modules-2.6.25-2-orion5x-di_1.26_arm.udeb ext3-modules-2.6.25-2-iop32x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/ext3-modules-2.6.25-2-iop32x-di_1.26_arm.udeb ext3-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/ext3-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb ext3-modules-2.6.25-2-orion5x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/ext3-modules-2.6.25-2-orion5x-di_1.26_arm.udeb fat-modules-2.6.25-2-footbridge-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/fat-modules-2.6.25-2-footbridge-di_1.26_arm.udeb fat-modules-2.6.25-2-iop32x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/fat-modules-2.6.25-2-iop32x-di_1.26_arm.udeb fat-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/fat-modules-2.6.25-2-ixp4xx-di_1.26_arm.udeb fat-modules-2.6.25-2-orion5x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/fat-modules-2.6.25-2-orion5x-di_1.26_arm.udeb ide-core-modules-2.6.25-2-iop32x-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/ide-core-modules-2.6.25-2-iop32x-di_1.26_arm.udeb ide-modules-2.6.25-2-footbridge-di_1.26_arm.udeb to pool/main/l/linux-kernel-di-arm-2.6/ide-modules-2.6.25-2-footbridge-di_1.26_arm.udeb ide-modules-2.6.25-2-iop32x-di_1.26_arm.udeb to
linux-kernel-di-mips-2.6_0.28_multi.changes ACCEPTED
Accepted: cdrom-core-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/cdrom-core-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb cdrom-core-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/cdrom-core-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb cdrom-core-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/cdrom-core-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb crypto-core-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-core-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb crypto-core-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-core-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb crypto-dm-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-dm-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb crypto-dm-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-dm-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb crypto-dm-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-dm-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb crypto-dm-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-dm-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb crypto-dm-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-dm-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb crypto-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb crypto-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb crypto-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb crypto-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb crypto-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/crypto-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb fat-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/fat-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb fat-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/fat-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb fat-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/fat-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb fb-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/fb-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb fb-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/fb-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb ide-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/ide-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb ide-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/ide-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb ide-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/ide-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb input-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/input-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb input-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/input-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb input-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/input-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb ipv6-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/ipv6-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb ipv6-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/ipv6-modules-2.6.25-2-r4k-ip22-di_0.28_mips.udeb ipv6-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/ipv6-modules-2.6.25-2-r5k-ip32-di_0.28_mips.udeb ipv6-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/ipv6-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb ipv6-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/ipv6-modules-2.6.25-2-sb1a-bcm91480b-di_0.28_mips.udeb isofs-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/isofs-modules-2.6.25-2-4kc-malta-di_0.28_mips.udeb isofs-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb to pool/main/l/linux-kernel-di-mips-2.6/isofs-modules-2.6.25-2-sb1-bcm91250a-di_0.28_mips.udeb
linux-kernel-di-sparc-2.6_1.32_multi.changes ACCEPTED
Accepted: ata-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/ata-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb cdrom-core-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/cdrom-core-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb crypto-core-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/crypto-core-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb crypto-dm-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/crypto-dm-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb crypto-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/crypto-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb ext3-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/ext3-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb fat-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/fat-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb ide-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/ide-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb ipv6-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/ipv6-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb isofs-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/isofs-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb jfs-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/jfs-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb kernel-image-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/kernel-image-2.6.25-2-sparc64-di_1.32_sparc.udeb linux-kernel-di-sparc-2.6_1.32.dsc to pool/main/l/linux-kernel-di-sparc-2.6/linux-kernel-di-sparc-2.6_1.32.dsc linux-kernel-di-sparc-2.6_1.32.tar.gz to pool/main/l/linux-kernel-di-sparc-2.6/linux-kernel-di-sparc-2.6_1.32.tar.gz md-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/md-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb multipath-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/multipath-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb nic-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/nic-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb nls-core-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/nls-core-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb pata-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/pata-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb plip-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/plip-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb ppp-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/ppp-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb reiserfs-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/reiserfs-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb sata-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/sata-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb scsi-common-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/scsi-common-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb scsi-core-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/scsi-core-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb scsi-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/scsi-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb usb-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/usb-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb xfs-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/xfs-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb zlib-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb to pool/main/l/linux-kernel-di-sparc-2.6/zlib-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb Override entries for your package: ata-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb - extra debian-installer cdrom-core-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb - standard debian-installer crypto-core-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb - extra debian-installer crypto-dm-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb - extra debian-installer crypto-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb - extra debian-installer ext3-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb - standard debian-installer fat-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb - extra debian-installer ide-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb - standard debian-installer ipv6-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb - extra debian-installer isofs-modules-2.6.25-2-sparc64-di_1.32_sparc.udeb - standard debian-installer
Bug#490562: marked as done (installation-report: hd-image couldn't mount partition)
Your message dated Mon, 28 Jul 2008 05:17:13 + with message-id [EMAIL PROTECTED] and subject line Bug#490562: fixed in linux-kernel-di-hppa-2.6 1.27 has caused the Debian Bug report #490562, regarding installation-report: hd-image couldn't mount partition to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [EMAIL PROTECTED] immediately.) -- 490562: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=490562 Debian Bug Tracking System Contact [EMAIL PROTECTED] with problems ---BeginMessage--- Package: installation-reports Version: 2.35 Severity: important -- Package-specific info: Boot method: usb Image version: daily amd64 image. from 12. Date: Date and time of the install Machine: intel d535ec based Partitions: df -Tl will do; the raw partition table is preferred Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ ] Detect network card:[ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [e] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Clock/timezone setup: [ ] User/password setup:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: The installer couldn't mount its own partition - it seem that mount/the kernel now by default tries to use iocharset=utf8 by default, but this charset isn't available in the installer. By changing iso-scan postinst to pass -o iocharset=iso8859-1 to the mount command, it was able to succeed. I guess it is related to the kernel changes recently described on devel: http://lists.debian.org/debian-devel/2008/07/msg00340.html -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to [EMAIL PROTECTED] == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=5.0 (lenny) - installer build 20080712-11:13 X_INSTALLATION_MEDIUM=hd-media == Installer hardware-summary: == umame -a: Linux eider 2.6.25-2-amd64 #1 SMP Fri Jun 27 00:16:12 UTC 2008 x86_64 unknown lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 82G35 Express DRAM Controller [8086:2980] (rev 03) lspci -knn: 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2982] (rev 03) lspci -knn: 00:02.1 Display controller [0380]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2983] (rev 03) lspci -knn: 00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02) lspci -knn: Kernel driver in use: e1000e lspci -knn: Kernel modules: e1000e lspci -knn: 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: Kernel modules: ehci-hcd lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831]
Bug#490562: marked as done (installation-report: hd-image couldn't mount partition)
Your message dated Mon, 28 Jul 2008 05:17:27 + with message-id [EMAIL PROTECTED] and subject line Bug#490562: fixed in linux-kernel-di-s390-2.6 0.26 has caused the Debian Bug report #490562, regarding installation-report: hd-image couldn't mount partition to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [EMAIL PROTECTED] immediately.) -- 490562: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=490562 Debian Bug Tracking System Contact [EMAIL PROTECTED] with problems ---BeginMessage--- Package: installation-reports Version: 2.35 Severity: important -- Package-specific info: Boot method: usb Image version: daily amd64 image. from 12. Date: Date and time of the install Machine: intel d535ec based Partitions: df -Tl will do; the raw partition table is preferred Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ ] Detect network card:[ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [e] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Clock/timezone setup: [ ] User/password setup:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: The installer couldn't mount its own partition - it seem that mount/the kernel now by default tries to use iocharset=utf8 by default, but this charset isn't available in the installer. By changing iso-scan postinst to pass -o iocharset=iso8859-1 to the mount command, it was able to succeed. I guess it is related to the kernel changes recently described on devel: http://lists.debian.org/debian-devel/2008/07/msg00340.html -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to [EMAIL PROTECTED] == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=5.0 (lenny) - installer build 20080712-11:13 X_INSTALLATION_MEDIUM=hd-media == Installer hardware-summary: == umame -a: Linux eider 2.6.25-2-amd64 #1 SMP Fri Jun 27 00:16:12 UTC 2008 x86_64 unknown lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 82G35 Express DRAM Controller [8086:2980] (rev 03) lspci -knn: 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2982] (rev 03) lspci -knn: 00:02.1 Display controller [0380]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2983] (rev 03) lspci -knn: 00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02) lspci -knn: Kernel driver in use: e1000e lspci -knn: Kernel modules: e1000e lspci -knn: 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: Kernel modules: ehci-hcd lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831]
Bug#490562: marked as done (installation-report: hd-image couldn't mount partition)
Your message dated Mon, 28 Jul 2008 05:17:16 + with message-id [EMAIL PROTECTED] and subject line Bug#490562: fixed in linux-kernel-di-ia64-2.6 1.31 has caused the Debian Bug report #490562, regarding installation-report: hd-image couldn't mount partition to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [EMAIL PROTECTED] immediately.) -- 490562: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=490562 Debian Bug Tracking System Contact [EMAIL PROTECTED] with problems ---BeginMessage--- Package: installation-reports Version: 2.35 Severity: important -- Package-specific info: Boot method: usb Image version: daily amd64 image. from 12. Date: Date and time of the install Machine: intel d535ec based Partitions: df -Tl will do; the raw partition table is preferred Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ ] Detect network card:[ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [e] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Clock/timezone setup: [ ] User/password setup:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: The installer couldn't mount its own partition - it seem that mount/the kernel now by default tries to use iocharset=utf8 by default, but this charset isn't available in the installer. By changing iso-scan postinst to pass -o iocharset=iso8859-1 to the mount command, it was able to succeed. I guess it is related to the kernel changes recently described on devel: http://lists.debian.org/debian-devel/2008/07/msg00340.html -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to [EMAIL PROTECTED] == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=5.0 (lenny) - installer build 20080712-11:13 X_INSTALLATION_MEDIUM=hd-media == Installer hardware-summary: == umame -a: Linux eider 2.6.25-2-amd64 #1 SMP Fri Jun 27 00:16:12 UTC 2008 x86_64 unknown lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 82G35 Express DRAM Controller [8086:2980] (rev 03) lspci -knn: 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2982] (rev 03) lspci -knn: 00:02.1 Display controller [0380]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2983] (rev 03) lspci -knn: 00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02) lspci -knn: Kernel driver in use: e1000e lspci -knn: Kernel modules: e1000e lspci -knn: 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: Kernel modules: ehci-hcd lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831]
Bug#490562: marked as done (installation-report: hd-image couldn't mount partition)
Your message dated Mon, 28 Jul 2008 05:17:29 + with message-id [EMAIL PROTECTED] and subject line Bug#490562: fixed in linux-kernel-di-sparc-2.6 1.32 has caused the Debian Bug report #490562, regarding installation-report: hd-image couldn't mount partition to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [EMAIL PROTECTED] immediately.) -- 490562: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=490562 Debian Bug Tracking System Contact [EMAIL PROTECTED] with problems ---BeginMessage--- Package: installation-reports Version: 2.35 Severity: important -- Package-specific info: Boot method: usb Image version: daily amd64 image. from 12. Date: Date and time of the install Machine: intel d535ec based Partitions: df -Tl will do; the raw partition table is preferred Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ ] Detect network card:[ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [e] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Clock/timezone setup: [ ] User/password setup:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: The installer couldn't mount its own partition - it seem that mount/the kernel now by default tries to use iocharset=utf8 by default, but this charset isn't available in the installer. By changing iso-scan postinst to pass -o iocharset=iso8859-1 to the mount command, it was able to succeed. I guess it is related to the kernel changes recently described on devel: http://lists.debian.org/debian-devel/2008/07/msg00340.html -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to [EMAIL PROTECTED] == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=5.0 (lenny) - installer build 20080712-11:13 X_INSTALLATION_MEDIUM=hd-media == Installer hardware-summary: == umame -a: Linux eider 2.6.25-2-amd64 #1 SMP Fri Jun 27 00:16:12 UTC 2008 x86_64 unknown lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 82G35 Express DRAM Controller [8086:2980] (rev 03) lspci -knn: 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2982] (rev 03) lspci -knn: 00:02.1 Display controller [0380]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2983] (rev 03) lspci -knn: 00:19.0 Ethernet controller [0200]: Intel Corporation 82566DC Gigabit Network Connection [8086:104b] (rev 02) lspci -knn: Kernel driver in use: e1000e lspci -knn: Kernel modules: e1000e lspci -knn: 00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: Kernel modules: ehci-hcd lspci -knn: 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02) lspci -knn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 02) lspci -knn: Kernel driver in use: pcieport-driver lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) lspci -knn: Kernel driver in use: uhci_hcd lspci -knn: Kernel modules: uhci-hcd lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831]