Package: installation-reports
INSTALL REPORT
Debian-installer-version: http://http.us.debian.org/debian/dists/testing/main/installer-sparc/current/images/sparc32/netboot/2.6/boot.img
uname -a: Linux sparc4.homeunix.net 2.6.8-1-sparc32 #1 Sun Oct 17 18:03:22 EDT 2004 sparc GNU/Linux
Date: Nov 28 2004
Method: How did you install? rarpd/tftpd running on i386 debiain What did you boot off? rarpd/tftpd running on i386 debiain If network install, from where? ftp.funet.fi Proxied? no
Machine: sparcstation4 Processor: Fujitsu MB86904 Memory: 64M
Root Device:
SCSI subsystem initialized
esp0: IRQ 36 SCSI ID 7 Clk 40MHz CCYC=25000 CCF=8 TOut 167 NCR53C9XF(espfast)
ESP: Total of 1 ESP hosts found, 1 actually in use.
scsi0 : Sparc ESP100A-FAST
Vendor: SEAGATE Model: ST39173WC Rev: 5698
Type: Direct-Access ANSI SCSI revision: 02
esp0: target 3 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sda: 17783240 512-byte hdwr sectors (9105 MB)
SCSI device sda: drive cache: write through
/dev/scsi/host0/bus0/target3/lun0: p1 p2 p3 p4
Attached scsi disk sda at scsi0, channel 0, id 3, lun 0
Root Size/partition table:
sparc4:~# fdisk -l
Disk /dev/sda (Sun disk label): 64 heads, 32 sectors, 8683 cylinders Units = cylinders of 2048 * 512 bytes
Device Flag Start End Blocks Id System /dev/sda1 0 95 97280 1 Boot /dev/sda2 95 8517 8624128 83 Linux native /dev/sda3 0 8683 8891392 5 Whole disk /dev/sda4 8517 8683 169984 82 Linux swap sparc4:~# mount | grep sda /dev/sda2 on / type ext3 (rw,errors=remount-ro) /dev/sda1 on /boot type ext3 (rw)
Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O]
Comments/Problems:
console was in black&white mode during installation and the menus were unusable
since you couldn't see what item you had selected in the list.
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]