Package:Install Initial install from cdrom dated 3-15-2004 Updated 06-03-2004 using dselect. Issue: CDROM unavailable since initial install. Eject button will not open cdrom after POC hardware test.
All else seems to be working great. lspci and lsmod at bottom of dmesg report: Linux version 2.4.25-1-386 ([EMAIL PROTECTED]) (gcc version 3.3.3 (Debian 20040401)) #2 Wed Apr 14 19:38:08 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fcf0000 (usable) BIOS-e820: 000000002fcf0000 - 000000002fcfb000 (ACPI data) BIOS-e820: 000000002fcfb000 - 000000002fd00000 (ACPI NVS) BIOS-e820: 000000002fd00000 - 000000002fe80000 (usable) BIOS-e820: 000000002fe80000 - 0000000030000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) 766MB LOWMEM available. ACPI: have wakeup address 0xc0001000 found SMP MP-table at 000f62e0 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a0000 reserved twice. On node 0 totalpages: 196224 zone(0): 4096 pages. zone(1): 192128 pages. zone(2): 0 pages. IBM machine detected. Enabling interrupts during APM calls. ACPI: RSDP (v000 PTLTD ) @ 0x000f62b0 ACPI: RSDT (v001 PTLTD RSDT 0x060400d0 LTP 0x00000000) @ 0x2fcf7424 ACPI: FADT (v001 IBM NETVISTA 0x060400d0 PTL 0x00000001) @ 0x2fcfaee2 ACPI: TCPA (v001 IBM NETVISTA 0x060400d0 PTL 0x00000001) @ 0x2fcfaf56 ACPI: MADT (v001 PTLTD APIC 0x060400d0 LTP 0x00000000) @ 0x2fcfaf88 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x060400d0 LTP 0x00000001) @ 0x2fcfafd8 ACPI: DSDT (v001 IBM Yelotail 0x060400d0 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: IBM Product ID: NETVISTA APIC at: 0xFEE00000 I/O APIC #1 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Kernel command line: root=/dev/hda1 ro Initializing CPU#0 Detected 1993.539 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3971.48 BogoMIPS Memory: 770264k/784896k available (1076k kernel code, 14180k reserved, 465k data, 92k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 1 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 1 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 1-0, 1-21, 1-22 not connected. ..TIMER: vector=0x31 pin1=-1 pin2=0 ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 25. number of IO-APIC #1 registers: 24. testing the IO APIC....................... IO APIC #1...... .... register #00: 01000000 ....... : physical APIC id: 01 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 0 0 0 0 0 1 1 31 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 1 1 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 0 0 1 1 71 0a 001 01 1 1 0 0 0 1 1 79 0b 001 01 1 1 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 1 0 1 1 A9 11 001 01 1 1 0 1 0 1 1 B1 12 001 01 1 1 0 1 0 1 1 B9 13 001 01 1 1 0 1 0 1 1 C1 14 001 01 1 1 0 1 0 1 1 C9 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 001 01 1 1 0 1 0 1 1 D1 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ2 -> 0:2 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1993.5670 MHz. ..... host bus clock speed is 99.6782 MHz. cpu: 0, clocks: 996782, slice: 498391 CPU0<T0:996768,T1:498368,D:9,S:498391,C:996782> ACPI: Subsystem revision 20040116 ACPI: Interpreter disabled. PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge PCI: Discovered primary peer bus 01 [IRQ] PCI: Using IRQ router PIIX/ICH [8086/24c0] at 00:1f.0 PCI->APIC IRQ transform: (B0,I2,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B0,I29,P3) -> 23 PCI->APIC IRQ transform: (B0,I31,P0) -> 16 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B2,I8,P0) -> 20 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 3792 blocks [1 disk] into ram disk... done. Freeing initrd memory: 3792k freed VFS: Mounted root (cramfs filesystem). Freeing unused kernel memory: 92k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide: late registration of driver. ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:DMA hda: ST330011A, ATA DISK drive hdb: IBM-DTTA-350430, ATA DISK drive blk: queue f0826460, I/O limit 4095Mb (mask 0xffffffff) blk: queue f082659c, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: attached ide-disk driver. hda: 59772900 sectors (30604 MB) w/2048KiB Cache, CHS=59298/16/63, UDMA(100) hdb: attached ide-disk driver. hdb: 8405775 sectors (4304 MB) w/469KiB Cache, CHS=8895/15/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: [PTBL] [3720/255/63] p1 p2 < p5 > /dev/ide/host0/bus0/target1/lun0: [PTBL] [523/255/63] p1 p2 < p5 > Journalled Block Device driver loaded EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Adding Swap: 497972k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal Real Time Clock Driver v1.10f Intel 810 + AC97 Audio, version 0.24, 20:24:08 Apr 14 2004 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xc0080c00 and 0xc0080800, IRQ 17 i810: Intel ICH4 mmio at 0xf0870c00 and 0xf0872800 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: ADS114 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 20:27:23 Apr 14 2004 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 18 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 ehci_hcd 00:1d.7: irq 23, pci mem f0877000 usb.c: new USB bus registered, assigned bus number 4 ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 128 is not supported by device 00:1d.7 ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected i810_rng: RNG not detected Intel(R) PRO/100 Network Driver - version 2.3.38-k1 Copyright (c) 2004 Intel Corporation e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled e100: eth0 NIC Link is Up 100 Mbps Half duplex device eth0 entered promiscuous mode Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Intel ISA PCIC probe: not found. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Intel ISA PCIC probe: not found. apm: BIOS not found. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 689M agpgart: Detected an Intel(R) 845G Chipset. agpgart: Detected 892K stolen memory. agpgart: AGP aperture is 128M @ 0x88000000 [drm] AGP 0.99 Aperture @ 0x88000000 128MB [drm] Initialized i830 1.3.2 20021108 on minor 0 SCSI subsystem driver Revision: 1.00 lspci pcilib: Cannot open /sys/bus/pci/devices 0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01) 0000:00:02.0 VGA compatible controller: Intel Corp. 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01) 0000:00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 01) 0000:00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 01) 0000:00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 01) 0000:00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller (rev 01) 0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev 81) 0000:00:1f.0 ISA bridge: Intel Corp. 82801DB (ICH4) LPC Bridge (rev 01) 0000:00:1f.1 IDE interface: Intel Corp. 82801DB (ICH4) Ultra ATA 100 Storage Controller (rev 01) 0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 01) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97 Audio Controller (rev 01) 0000:02:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (LOM) Ethernet Controller (rev 81) lsmod Module Size Used by Not tainted edd 7180 0 (unused) sg 28316 0 (autoclean) (unused) scsi_mod 85312 1 (autoclean) [sg] isofs 23156 0 (autoclean) input 3040 0 (autoclean) i830 54524 12 agpgart 39428 11 (autoclean) pcmcia_core 38752 0 af_packet 11592 1 (autoclean) e100 42056 1 ehci-hcd 14956 0 (unused) usb-uhci 19632 0 (unused) usbcore 52908 1 [ehci-hcd usb-uhci] i810_audio 21340 0 (unused) ac97_codec 11412 0 [i810_audio] soundcore 3268 2 [i810_audio] ide-cd 27936 0 cdrom 25056 0 [ide-cd] rtc 6280 0 (autoclean) ext3 66632 1 (autoclean) jbd 35076 1 (autoclean) [ext3] ide-detect 288 0 (autoclean) (unused) piix 7432 1 (autoclean) ide-disk 12512 2 (autoclean) ide-core 94108 2 (autoclean) [ide-cd ide-detect piix ide-disk] unix 13260 101 (autoclean) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]