Package: installation-reports
Version: 2.43
Severity: important
Tags: d-i squeeze
-- Package-specific info:
Boot method: pressed tab and did debconf/priority=low speakup.synth=dectlk
Image version:
http://people.debian.org/~joeyH/d-i/images/daily/netboot/gtk/mini.iso
Date: 14th of December 2010 at around 11 PM Central time
Machine: custom built system with intel p4 processer 3.3 GHZ and 2 GB of ram
and an 80 GB hard drive that is IDE and all hardware works under linux
Partitions: FilesystemType 1K-blocks Used Available Use% Mounted on
/dev/sda2 ext476804136 3542952 72480888 5% /
tmpfstmpfs 1033296 0 1033296 0% /lib/init/rw
udev tmpfs 1028928 212 1028716 1% /dev
tmpfstmpfs 1033296 0 1033296 0% /dev/shm
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O ]
Detect network card: [O ]
Configure network: [O ]
Detect CD: [O ]
Load installer modules: [O ]
Detect hard drives: [O ]
Partition hard drives: [O ]
Install base system:[O ]
Clock/timezone setup: [O ]
User/password setup:[O ]
Install tasks: [O ]
Install boot loader:[O ]
Overall install:[O ]
Comments/Problems:
Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.
When I booted the installation from the CD I had set debconf/priority to low
and after the base system I went into console two and chrooted into /target and
set debconf/priority to low and also changed the adduser to not have system
wide readible home directories. When I tried to install X windows as well as
the standard system I got the selection of what pam modules needed to be chosen
and no matter which one or ones I selected the installation would not let me
continue saying no pam profiles could be selected I put spaces in front of the
numbers like with all of the other installation prompts that can be handled
this way. After the installation when running tasksel and installing all tasks
on the system I still got this same issue and had to boot into single user mode
as booting into normal mode caused the system to freeze as I could not just
kill aptitude as there was a lock that would not go away. When I rebooted into
single user mode I ran dpkg --reconfigure -a and se
lected unix authentication when the pam prompt came up and everything worked
fine but still this should be fixed as I would have liked to install X windows
as well as all other tasks during the initial installation and not have to
reboot more then once to finish the installation.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to sub...@bugs.debian.org.
==
Installer lsb-release:
==
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION=Debian GNU/Linux installer
DISTRIB_RELEASE=6.0 (squeeze) - installer build 20101214-21:57
X_INSTALLATION_MEDIUM=netboot-gtk
==
Installer hardware-summary:
==
uname -a: Linux chihuahuad1 2.6.32-5-486 #1 Fri Dec 10 15:32:53 UTC 2010 i686
GNU/Linux
lspci -knn: 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570] (rev 02)
lspci -knn: Subsystem: Intel Corporation 82865G/PE/P DRAM
Controller/Host-Hub Interface [8086:2570]
lspci -knn: Kernel driver in use: agpgart-intel
lspci -knn: 00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G
Integrated Graphics Controller [8086:2572] (rev 02)
lspci -knn: Subsystem: Micro-Star International Co., Ltd. Device [1462:0370]
lspci -knn: 00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P
Processor to I/O Memory Interface [8086:2576] (rev 02)
lspci -knn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02)
lspci -knn: Subsystem: Micro-Star International Co., Ltd. Device [1462:0370]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02)
lspci -knn: Subsystem: Micro-Star International Co., Ltd. Device [1462:0370]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02)
lspci -knn: Subsystem: Micro-Star International Co., Ltd. Device [1462:0370]
lspci -knn: Kernel driver in use: uhci_hcd
lspci -knn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER
(ICH5/ICH5R) USB UHCI Controller #4