Hi.
Trying to install with D-I beta 3 (i386, DVD binary-1), the installation
fails due to the CD drive not being detected. This seems to be a
PIIX/sata problem with the SATA driver blocking the PATA ports without
supporting them again.
Find attached an lspci -v and dmesg log. If you need any other logs,
please let me know, preferrably also by CCing me. I'm subscribed, but
sometimes don't have enough spare time to check the list.
regards,
Sven
PS: The selection screen for loading individual modules (IIRC) says
ALT-F2 would lead to a prompt and ALT-F1 would lead back to the dialogue
even in graphical installs where it is CTRL-ALT-F2 and (CTRL-)ALT-F7 (or
F5?) respectively.
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 22204K size 1024 blocksize
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
EISA: Detected 0 cards.
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input0
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI wakeup devices:
LID PBTN PCI0 USB0 USB1 USB2 USB3 EHCI AZAL PCIE RP01 RP02 NIC RP04 RP05 RP06
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 228k freed
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt :03:01.0[A] -> GSI 19 (level, low) -> IRQ 193
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[193] MMIO=[dcbff800-dcbf]
Max Packet=[2048] IR/IT contexts=[4/4]
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt :00:1d.0[A] -> GSI 20 (level, low) -> IRQ 58
PCI: Setting latency timer of device :00:1d.0 to 64
uhci_hcd :00:1d.0: UHCI Host Controller
uhci_hcd :00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd :00:1d.0: irq 58, io base 0xbf80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
libata version 1.20 loaded.
ACPI: PCI Interrupt :00:1d.1[B] -> GSI 21 (level, low) -> IRQ 66
PCI: Setting latency timer of device :00:1d.1 to 64
uhci_hcd :00:1d.1: UHCI Host Controller
uhci_hcd :00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd :00:1d.1: irq 66, io base 0xbf60
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt :00:1d.2[C] -> GSI 22 (level, low) -> IRQ 74
PCI: Setting latency timer of device :00:1d.2 to 64
uhci_hcd :00:1d.2: UHCI Host Controller
uhci_hcd :00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd :00:1d.2: irq 74, io base 0xbf40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt :00:1d.3[D] -> GSI 23 (level, low) -> IRQ 82
PCI: Setting latency timer of device :00:1d.3 to 64
uhci_hcd :00:1d.3: UHCI Host Controller
uhci_hcd :00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd :00:1d.3: irq 82, io base 0xbf20
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
ata_piix :00:1f.2: version 1.05
ACPI: PCI Interrupt :00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device :00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x20
input: SynPS/2 Synaptics TouchPad as /class/input/input1
ata1: dev 0 cfg 49:2f00 82:746b 83:7f09 84:6123 85:7469 86:3e09 87:6123 88:207f
ata1: dev 0 ATA-7, max UDMA/133, 231496650 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
Vendor: ATA Model: WDC WD1200BEVS-7 Rev: 02.0
Type: Direct-Access ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15
usb 1-1.2: new full speed USB device using uhci_hcd and address 3
ata2: dev 0 cfg 49:0b00 82:0210 83:5000 84:4000 85:0210 86:1000 87:4000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
usb 1-1.2: configuration #1 chosen from 1 choice
a
