Bug#423933: libbfd-2.17.so not found
On Sat, Jul 14, 2007 at 10:20:24PM +0200, Cyril Brulebois wrote: > Peter Chubb <[EMAIL PROTECTED]> (15/05/2007): > > Package: skyeye > > Version: 1.2.1-2 > > Severity: grave > > On a fresh x86 installation, trying to run skyeye gives: > > skyeye: error while loading shared libraries: libbfd-2.17.so: cannot > > open shared object file: No such file or directory > After a rebuild, it looks like this is gone. Although, I noticed this > during the build: > dpkg-shlibdeps: warning: unable to find dependency information for shared > library libbfd (soname 2.17.50.20070713, path libbfd-2.17.50.20070713.so, > dependency field Depends) > It looks to me that a binNMU might be sufficient, hence Cc-ing > debian-release. Except that a binNMU will still pick up a dependency on 'binutils', which is still wrong. I find four packages in the archive that are picking up a dependency on 'binutils' by way of shlibs: ggcov, nitpic, skyeye, and sysprof. nitpic needs libbfd-2.16.91.so, that's nice... ggcov, sysprof, and skyeye at least manage to have binary packages in stable that depend on the matching version of binutils. But all four packages are buggy, as is binutils for providing broken shlibs. The shlibs provided by binutils are effectively not supportable in a stable release; which means that until binutils has reasonable shlibs (perhaps using a virtual package name, the way apt does for its library?), packages should not be dynamically linking to libbfd. No binNMUs scheduled -- that would fix the current brokenness of the binary packages in unstable, but wouldn't fix the root RC bug. Thanks, -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. [EMAIL PROTECTED] http://www.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433150: aptitude: Totally Destroyed Debian as VMware appliance
Quoting Jonathan Smith ([EMAIL PROTECTED]): > Subject: aptitude: Totally Destroyed Debian as VMware appliance > Package: aptitude > Version: 0.4.4-4 > Severity: normal > > *** Please type your report below this line *** > > After aptitude held back a large number of packages schedule for > update, I did 'apt-get dist-upgrade' (Yes, I was asking for trouble). > > Sometime later ran aptitude again. An upgrade proceeded, to include > linux-kernels (e.g., 686 and k7). There was some long message with > answering OK being the only response. > > Afterward none of the kernels would boot. There was an file not found > error message. > > The info below show my system after a full restore to stable; I was > using testing when disaster struck. I see no reason for this bug to be assigned to aptitude. Moreover, as you give no details except vague messages about what you experienced, I do'nt think that aptitude maintainer can do anything about this. This bug will either rot in the BTS or just be closed without "solution". As you mentioned VmWare, please note that it is known that VmWare version 5 doesn't boot 2.6.21 any longer. signature.asc Description: Digital signature
Bug#415712: Not really fixed
tag 415712 pending thanks On Fri, Jun 08, 2007 at 12:16:28PM +0800, Hongzheng Wang wrote: > Hi Michael, > > This bug is not really fixed. It seems that eclipse now check > `/usr/lib/j2sdk1.6-sun' when it looks for a java environment. This > position, however, is not the one sun-java-6 packages locate in. > Instead, the sun-java-6 packages shipped by Debian are in > `/usr/lib/jvm/java-6-sun-1.6.0.00', which has a symbolic link as > `/usr/lib/jvm/java-6-sun'. > > Perhaps, a discussion between you and the maintainers of sun-java-6 > packages is needed. /usr/lib/j2sdk1.6-sun is a correct place to look. Its the place where java-package puts SUN JDK 6. The issue in this case was that I used /usr/lib/jvm/java-1.6.0-sun (which doesnt exist) instead of /usr/lib/jvm/java-6-sun. I got a bit fooled by the /usr/lib/jvm/java-1.5.0-sun entry. Anyway, the next upload will fix this. Thanks for reporting the issue. Cheers, Michael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433174: dibbler: [INTL:ru] Russian debconf templates translation
Package: dibbler Severity: wishlist Tags: l10n patch Russian debconf templates translation is attached. -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-4-amd64 Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to ru_RU.UTF-8) # translation of ru.po to Russian # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # # Yuri Kozlov <[EMAIL PROTECTED]>, 2007. msgid "" msgstr "" "Project-Id-Version: 0.6.0-1\n" "Report-Msgid-Bugs-To: [EMAIL PROTECTED]" "POT-Creation-Date: 2007-07-11 19:57+0200\n" "PO-Revision-Date: 2007-07-15 11:23+0400\n" "Last-Translator: Yuri Kozlov <[EMAIL PROTECTED]>\n" "Language-Team: Russian <[EMAIL PROTECTED]>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n" #. Type: title #. Description #: ../dibbler-client.templates:2001 msgid "dibbler-client: DHCPv6 client" msgstr "dibbler-client: клиент DHCPv6" #. Type: boolean #. Description #: ../dibbler-client.templates:3001 msgid "Should the Dibbler client be launched when the system starts?" msgstr "Запускать клиента Dibbler при загрузке системы?" #. Type: boolean #. Description #: ../dibbler-client.templates:3001 msgid "" "The Dibbler client can be configured to be launched when the system is " "started. If you choose this option, this host will have a correct IPv6 setup " "after booting. Please ensure that a DHCPv6 server is available on the " "network." msgstr "" "Клиент Dibbler можно настроить на запуск во время загрузки системы. " "Если вы ответите утвердительно, то эта машина будет правильно " "настроена в IPv6 сети после загрузки. Убедитесь, что в сети работает сервер " "DHCPv6." #. Type: string #. Description #: ../dibbler-client.templates:4001 msgid "Interfaces to be configured:" msgstr "Интерфейсы для настройки:" #. Type: string #. Description #: ../dibbler-client.templates:4001 msgid "Dibbler can configure any or all of a computer's network interfaces." msgstr "" "Dibbler можно настроить на некоторых или на всех сетевых интерфейсах " "компьютера." #. Type: string #. Description #: ../dibbler-client.templates:4001 msgid "" "More than one interface may be specified by separating the interface names " "with spaces." msgstr "Несколько имён интерфейсов нужно указывать через пробел." #. Type: multiselect #. Choices #: ../dibbler-client.templates:5001 msgid "dns" msgstr "dns-серверы" #. Type: multiselect #. Choices #: ../dibbler-client.templates:5001 msgid "domain" msgstr "домен" #. Type: multiselect #. Description #: ../dibbler-client.templates:5002 msgid "Additional parameters to obtain:" msgstr "Параметры, получаемые дополнительно:" #. Type: multiselect #. Description #: ../dibbler-client.templates:5002 msgid "" "The Dibbler client can request that the DHCPv6 server supplies additional " "configuration parameters." msgstr "" "Клиент Dibbler может запросить у сервера DHCPv6 дополнительные " "параметры настройки." #. Type: title #. Description #: ../dibbler-relay.templates:2001 msgid "dibbler-relay: DHCPv6 relay" msgstr "dibbler-relay: релей DHCPv6" #. Type: boolean #. Description #: ../dibbler-relay.templates:3001 msgid "Should the Dibbler relay be launched when the system starts?" msgstr "Запускать релей Dibbler при загрузке системы?" #. Type: boolean #. Description #: ../dibbler-relay.templates:3001 msgid "" "The Dibbler relay can be configured to be launched when the system is " "started. If you choose this option, this node will forward DHCPv6 messages " "between clients, servers and other relays." msgstr "" "Релей Dibbler можно настроить на запуск во время загрузки системы. " "Если вы ответите утвердительно, то эта машина будет пересылать " "сообщения DHCPPv6 между клиентами, серверами и другими " "релеями." #. Type: title #. Description #: ../dibbler-server.templates:2001 msgid "dibbler-server: DHCPv6 server" msgstr "dibbler-server: сервер DHCPv6" #. Type: boolean #. Description #: ../dibbler-server.templates:3001 msgid "Should the Dibbler server be launched when the system starts?" msgstr "Запускать сервер Dibbler при загрузке системы?" #. Type: boolean #. Description #: ../dibbler-server.templates:3001 msgid "" "The Dibbler server can be configured to be launched when the system is " "started. If you choose this option, this node will act as a DHCPv6 server. " "It will provide IPv6 addresses and additional configuration options to other " "nodes in the network." msgstr "" "Сервер Dibbler можно настроить на запуск во время загрузки системы. " "Если вы ответите утвердительно, то эта машина работать в качестве " "сервера DHCPPv6. Она будет выдавать адреса IPv6 и дополнительные
Bug#433161: compiz: messes up xfce workspaces
Michael Gilbert wrote: > Package: compiz > Version: 0.2.2-1 > Severity: normal > > when compiz is started on a system running xfce, the number of > workspaces will forced to one. even after compiz is stopped, there is > still only one workspace. it should be expected that compiz would not > alter xfce's number of workspaces. > Does compiz 0.5 help? It's in testing and unstable. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433144: xserver-xorg: VESA driver fails to load with: ILLEGAL EXTENDED X86 OPCODE!
reassign 433144 xserver-xorg-core forcermerge 404885 433144 thank you ian wrote: > Package: xserver-xorg > Version: 1:7.2-5 > Severity: important > > Xorg was working with the VESA driver @ 800x600 res with 24 bit colour. After > an upgrade the server stopped loading. The VGA driver still works. > Looks similar to #404885. I will forward this bug upstream at bugzilla.freedesktop.org next week. Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433092: [Pkg-samba-maint] Bug#433092: samba: package uninstallable due to unsatisfiable depends
Quoting Jiří Paleček ([EMAIL PROTECTED]): > Package: samba > Version: 3.9.1+4.0.0tp1-1 > Severity: important > > Hello, > > Samba in experimental depends on libgnutls12, which is not in the Debian > archive. > This makes the package uninstallable. and completely outdated We really should request for that package to be removed from the archive. Steve, do we need ftpmaster's help there? signature.asc Description: Digital signature
Bug#430189: gnome-speech: General update after the debconf review process
Dear Debian maintainer, On Saturday, June 02, 2007, I sent you a notification about the beginning of a review action on debconf templates for gnome-speech. Then, I sent you a bug report with rewritten templates and announcing the beginning of the second phase of this action: call for translation updates. Translators have been working hard and here is now the result of their efforts. Please consider using it EVEN if you committed files to your development tree as long as they were reported. The attached tarball contains: - debian/changelog with the list of changes - debian/control with rewrites of packages' descriptions - debian/ with all the rewritten templates file(s) - debian/po/*.po with all PO files (existing ones and new ones) As said, please use *at least* the PO files as provided here, preferrably over those sent by translators in their bug reports. All of them have been checked and reformatted. In some cases, formatting errors have been corrected. The patch-nopo file contains a patch for the templates and control file(s). Please note that this patch applies to the templates and control file(s) of your package as of Saturday, June 02, 2007. If your package was updated in the meantime, I may have updated my reference copybut I also may have missed that. This is indeed why I suggested you do not modified such files while the review process was running, remember..:-) It is now safe to upload a new package version with these changes. Please notify me of your intents with regards to this. There is of course no hurry to update your package but feel free to contact me in case you would need sponsoring or any other action to fix this. -- patch.tar.gz Description: Binary data --- gnome-speech.old/debian/gnome-speech-swift.templates2007-05-29 08:46:04.966978164 +0200 +++ gnome-speech/debian/gnome-speech-swift.templates2007-06-23 03:10:47.502057416 +0200 @@ -1,9 +1,18 @@ +# These templates have been reviewed by the debian-l10n-english +# team +# +# If modifications/additions/rewording are needed, please ask +# for an advice to [EMAIL PROTECTED] +# +# Even minor modifications require translation updates and such +# changes should be coordinated with translators and reviewers. + Template: gnome-speech-swift/swift_dir Type: string Default: /opt/swift -_Description: Cepstral swift directory: - The Cepstral swift include files and shared libraries are required - To compile the swift backend for GNOME Speech. +_Description: Cepstral swift installation directory: + Cepstral swift include files and shared libraries are required + to compile the swift backend for GNOME Speech. . - Enter the toplevel path where you installed the swift engine. + Please enter the directory where the swift engine is installed. --- gnome-speech.old/debian/control 2007-05-29 08:46:04.966978164 +0200 +++ gnome-speech/debian/control 2007-06-18 01:19:26.118576789 +0200 @@ -53,6 +53,5 @@ Upon installation, it will automatically attempt to compile and install the swift-synthesis-driver binary required to use GNOME Speech with swift. . - Important: This package is only useful if you have already downloaded and - installed the swift engine on your computer. - + This package is only useful if the swift engine is already installed on the + system. signature.asc Description: Digital signature
Bug#433175: Right clicking an icon on Desktop crashes nautilus
Package: nautilus Version: 2.18.1-3 Severity: important Nautilus crashes when I right-clicks on an icon on Desktop. To reproduce, 1. Run startx 2. Right-clcik on any icon on Desktop. Here's a trace back after installing bug-buddy, nautilus-dbg and libgtk2-dbg. Distribution: Debian lenny/sid Gnome Release: 2.18.3 2007-07-03 (Debian) BugBuddy Version: 2.18.1 System: Linux 2.6.22-1-686 #1 SMP Sat Jul 14 00:01:11 UTC 2007 i686 X Vendor: The X.Org Foundation X Vendor Release: 1030 Selinux: No Accessibility: Disabled GTK+ Theme: Clearlooks Icon Theme: gnome Memory status: size: 63664128 vsize: 63664128 resident: 16986112 share: 12263424 rss: 16986112 rss_rlim: 4294967295 CPU usage: start_time: 1184483721 rtime: 74 utime: 68 stime: 6 cutime:0 cstime: 0 timeout: 0 it_real_value: 0 frequency: 100 Backtrace was generated from '/usr/bin/nautilus' Using host libthread_db library "/lib/i686/cmov/libthread_db.so.1". [Thread debugging using libthread_db enabled] [New Thread -1227123024 (LWP 6180)] 0xe410 in ?? () #0 0xe410 in ?? () #1 0xbfdc8ca8 in ?? () #2 0x in ?? () Thread 1 (Thread -1227123024 (LWP 6180)): #0 0xe410 in ?? () No symbol table info available. #1 0xbfdc8ca8 in ?? () No symbol table info available. #2 0x in ?? () No symbol table info available. #0 0xe410 in ?? () The program is running. Quit anyway (and detach it)? (y or n) [answered Y; input not from terminal] --- .xsession-errors (36433814 sec old) - connection: 0x80e9a78 properties: ((name "DiscardCommand") (type "LISTofARRAY8") (value "rm") (value "-f") (value "/home/stluk/.metacity/sessions/1143643389-5149-366866963.ms")) ((name "CloneCommand") (type "LISTofARRAY8") (value "metacity")) ((name "RestartCommand") (type "LISTofARRAY8") (value "metacity") (value "--sm-save-file") (value "1143643389-5149-366866963.ms")) ((name "Program") (type "ARRAY8") (value "metacity")) ((name "UserID") (type "ARRAY8") (value "stluk")) ((name "RestartStyleHint") (type "CARD8") (value "")) ((name "ProcessID") (type "ARRAY8") (value "5165")) ((name "CurrentDirectory") (type "ARRAY8") (value "/home/stluk")) ((name "_GSM_Priority") (type "CARD8") (value "")) id: 117f0100011217660290021090002 handle: 2 connection: 0x80ecb90 properties: ((name "CurrentDirectory") (type "ARRAY8") (value "/home/stluk -- Regards, ST -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.22-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages nautilus depends on: ii desktop-file-utils 0.12-1Utilities for .desktop files ii gnome-control-center 1:2.18.1-1utilities to configure the GNOME d ii libart-2.0-2 2.3.19-3 Library of functions for 2D graphi ii libatk1.0-01.18.0-2 The ATK accessibility toolkit ii libbonobo2-0 2.18.0-2 Bonobo CORBA interfaces library ii libc6 2.6-2 GNU C Library: Shared libraries ii libcairo2 1.4.10-1 The Cairo 2D vector graphics libra ii libeel2-2.18 2.18.0.1-2Eazel Extensions Library (for GNOM ii libesd-alsa0 [libesd0] 0.2.36-3 Enlightened Sound Daemon (ALSA) - ii libexif12 0.6.16-1 library to parse EXIF files ii libgail-common 1.18.0-2 GNOME Accessibility Implementation ii libgail18 1.18.0-2 GNOME Accessibility Implementation ii libgconf2-42.18.0.1-3GNOME configuration database syste ii libglade2-01:2.6.1-1 library to load .glade files at ru ii libglib2.0-0 2.12.12-1+b1 The GLib library of C routines ii libgnome-desktop-2 2.18.3-1 Utility library for loading .deskt ii libgnome2-02.18.0-4 The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.14.0-3 A powerful object-oriented display ii libgnomeui-0 2.18.1-2 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 1:2.18.1-3+b1 GNOME Virtual File System (runtime ii libgtk2.0-02.10.13-1 The GTK+ graphical user interface ii libnautilus-extension1 2.18.1-3 libraries for nautilus components ii liborbit2 1:2.14.7-0.1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.16.4-2 Layout and rendering of internatio ii librsvg2-2 2.16.1-2 SAX-based renderer library for SVG ii libselinux12.0.15-2+b1 SELinux shared libraries ii libstartup-notification0 0.9-1 library for program launch feedbac ii libx11-6 2:1.0.3-7 X11 c
Bug#433167: compiz: fullscreen opengl games end up showing only a black screen
reassign 433167 libgl1-mesa-dri forcemerge 411141 433167 thank you Michael Gilbert wrote: > Package: compiz > Version: 0.2.2-1 > Severity: important > > when compiz is running, fullscreen opengl games become unplayable. > instead of the game rendering, there is just a completely black screen. > when compiz is not running, the game works just fine. > > to test this out, start up openarena and set it on windowed mode (you > can verify that both fullscreen and windowed mode work fine at this > point without compiz running). then start up compiz. the game works > fine here in windowed mode. now go to the menu and switch to > fullscreen. the screen will go all black, and the game and compiz will > both need to be killed to get the system working again. > That's probably expected. See #411141. About #415227, does changing /apps/compiz/general/screen0/options/unredirect_fullscreen_windows in gconf help? Brice -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#428663: Eclipse freezes BUG
On Wed, Jun 13, 2007 at 01:38:39PM +0200, Petr Castek wrote: > Package: eclipse > Version: 3.2.1-6 > > The IDE starts normally. I'm editing some Python files (opening and > closing them). When closing the already saved file, I click on the red > cross of the file or I press Alt+F4. In both cases, sometimes it closes > the file without problem, but sometimes the whole Eclipse freezes and > the CPU is on 100%. Below is the ps and top reports in the moment the > Eclipse is frozen. > > Sometimes it happens also when doubleclicking on some word in the opened > file in the Eclipse's editor. Sorry for the long delay. Can you please retry with using sun-java5-jdk instead of java-gcj-compat as runtime? This might be working. Another options is to try with eclipse 3.2.2-1. Please report back if anything of this helps or not. Cheers, Michael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433176: FTBFS: make: aclocal-1.9: Command not found
Package: freefem3d Version: 1.0pre10-1 Severity: serious You are build-depending on automake1.10 but using automake1.9. Use pbuilder please... build log snip: Automatic build of freefem3d_1.0pre10-1 on smackdown by sbuild/arm 98 Build started at 20070714-1420 ... debian/rules build test -x debian/rules mkdir -p "." libtoolize -c -f You should add the contents of `/usr/share/aclocal/libtool.m4' to `aclocal.m4'. aclocal-1.9 -I m4 make: aclocal-1.9: Command not found make: *** [debian/stamp-my-autotools] Error 127 ** Build finished at 20070714-1438 FAILED [dpkg-buildpackage died] "rm -rf" only sounds scary if you don't have backups -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433092: [Pkg-samba-maint] Bug#433092: Bug#433092: samba: package uninstallable due to unsatisfiable depends
On Sun, Jul 15, 2007 at 09:26:23AM +0200, Christian Perrier wrote: > We really should request for that package to be removed from the > archive. > Steve, do we need ftpmaster's help there? For a removal, yes. -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. [EMAIL PROTECTED] http://www.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#431811: nvidia-glx-legacy-96xx: black screen on X startup for geforce 420/440 go cards
I have a 420 MX, and use the 96xx driver. I also always got a black screen when starting up. What worked for me was to out-comment some lines in /etc/runlevel.conf, preventing the scripts from being executed. The lines are: #20 0,1,6 2,3,4,5 /etc/init.d/nvidia-kernel #20 0,1,6 2,3,4,5 /etc/init.d/nvidia-glx-legacy-96xx #20 0,1,6 2,3,4,5 /etc/init.d/nvidia-glx pgpKtCBi6zRRL.pgp Description: PGP signature
Bug#411851: Patch to make pm-utils restart sl-modem-daemon
On Tue, 10 Jul 2007 19:10:23 +0200 Julien Valroff <[EMAIL PROTECTED]> wrote: > Hi Tim, > > Le jeudi 17 mai 2007 à 21:54 +0200, Tim Dijkstra (tdykstra) a écrit : > > Package: sl-modem-daemon > > Followup-For: Bug #411851 > > > > As discussed, the best I can do is make pm-utils restart > > sl-modem-daemon. > > > > I'll attach a patch, I verified that the sl-modem-daemon package has the > > correct content now, I don't know about sl-modem-source. > > With the attached patch, I have an error in the pm-suspend.log: > /var/run/pm-suspend: line 1: export `sl-modem-daemon_SERVICE_ACTIVATE=yes': > not a valid identifier This is a bug in pm-utils. It doesn't accept a dash `-' in the service name, which is a bit stupid. I'll try to fix that. grts Tim signature.asc Description: PGP signature
Bug#433132: Version 2 not compatible with 1.X
Hi Iacopo, El ds 14 de 07 del 2007 a les 20:15 +0200, en/na Iacopo Spalletti va escriure: > Package: python-tables > Version: 2.0-1 > Severity: important > > --- Please enter the report below this line. --- > > Version 2 of pytables is not compatibile with 1.X, moreover, version 2 lacks > (in free version) features 1.X has (like column indexing). In which sense version 2 is not compatible with 1.x? > Due to this issues packages for both versions should be available in lenny. Keeping version 1.x in debian has the (grave) problem that it depends on numarray that, besides having known problems with 64-bit platforms, it is not being maintained anymore (the numarray makers are strongly encouraging people to migrate to NumPy [1]). So, I'm afraid that keeping PyTables 1.x series in lenny will only be a source of problems. Being said that, I'm ok if anybody would go ahead and be in charge of maintaining the 1.x series in debian (at his own responsability). [1] http://www.stsci.edu/resources/software_hardware/numarray Cheers, -- Francesc Altet| Be careful about using the following code -- Carabos Coop. V. | I've only proven that it works, www.carabos.com | I haven't tested it. -- Donald Knuth -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433179: pm-utils: restartsevice is broken for services with a dash
Package: pm-utils Version: 0.99.2-2 Severity: important Services with a dash in their name can't use restartservice. Example: /var/run/pm-suspend: line 1: export `sl-modem-daemon_SERVICE_ACTIVATE=yes': not a valid identifier -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (600, 'unstable'), (500, 'stable'), (19, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.21.5 Locale: LANG=C, LC_CTYPE=C (charmap=UTF-8) (ignored: LC_ALL set to nl_NL.utf8) Shell: /bin/sh linked to /bin/dash Versions of packages pm-utils depends on: ii powermgmt-base1.29 Common utils and configs for power Versions of packages pm-utils recommends: ii hal0.5.9.1-1 Hardware Abstraction Layer pn radeontool (no description available) ii uswsusp0.6~cvs20070513-1 tools to use userspace software su ii vbetool0.7-1.1 run real-mode video BIOS code to a -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433180: bug-buddy: Bug buddy error - failed to parse the xml-rpc response
Package: bug-buddy Version: 2.18.1-2 Severity: grave Justification: renders package unusable While trying to report a bug on natutilus, I got this error with bug-buddy. The screen shot of the error messages can be seen here: http://www.imagecows.com/uploads/7e91-Screenshot-BugBuddy-crash.png Regards, ST -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.22-1-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages bug-buddy depends on: ii gconf2 2.18.0.1-3GNOME configuration database syste ii gdb6.6.dfsg-1The GNU Debugger ii libbonobo2-0 2.18.0-2 Bonobo CORBA interfaces library ii libc6 2.6-2 GNU C Library: Shared libraries ii libebook1.2-9 1.10.2-2 Client library for evolution addre ii libgconf2-42.18.0.1-3GNOME configuration database syste ii libglade2-01:2.6.1-1 library to load .glade files at ru ii libglib2.0-0 2.12.12-1+b1 The GLib library of C routines ii libgnome-menu2 2.18.3-1 an implementation of the freedeskt ii libgnome2-02.18.0-4 The GNOME 2 library - runtime file ii libgnomeui-0 2.18.1-2 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 1:2.18.1-3+b1 GNOME Virtual File System (runtime ii libgtk2.0-02.10.13-1 The GTK+ graphical user interface ii libgtop2-7 2.14.9-1 gtop system monitoring library ii liborbit2 1:2.14.7-0.1 libraries for ORBit2 - a CORBA ORB ii libsoup2.2-8 2.2.100-1 an HTTP library implementation in ii libxml22.6.29.dfsg-1 GNOME XML library ii scrollkeeper 0.3.14-13 A free electronic cataloging syste bug-buddy recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433178: Missing dependency on libx11-dev
Package: nvidia-glx-dev Version: 1.0.8776-4 Severity: important The package headers (GL/glx.h) include headers from libx11-dev and thus depend on it to function. This dependency needs to be recorded in the package control file. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433070: exim4: [INTL:ja] updated Japanese debconf translation
tags #433070 confirmed pending thanks On Sat, Jul 14, 2007 at 04:54:09PM +0900, Kenshi Muto wrote: > I updated Japanese translation of debconf messages (ja.po). > Please apply this. Committed to svn, thanks. Greetings Marc -- - Marc Haber | "I don't trust Computers. They | Mailadresse im Header Mannheim, Germany | lose things."Winona Ryder | Fon: *49 621 72739834 Nordisch by Nature | How to make an American Quilt | Fax: *49 621 72739835 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#428007: Trouble with configure recognizing superlu
[ Friday 13 July 2007 ] | #include | *** |** UNABLE to CONFIGURE with GIVEN OPTIONS (see configure.log for | details): | --- | --with-superlu-lib=['/usr/lib/libsuperlu.so'] and | --with-superlu-include=/usr/include/superlu did not work | *** |** | | Is it possible there's a version mismatch? Christophe, is it possible | that the Debian package doesn't install this (optional?) header file? | | The directory /usr/include/superlu has: | Cnames.h csp_defs.h dsp_defs.h ssp_defs.h util.h | colamd.h dcomplex.h scomplex.h supermatrix.h zsp_defs.h Adam, I have uploaded the latest version of superlu, here are the header files ls /usr/include/superlu/ colamd.h slu_cdefs.h slu_dcomplex.h slu_scomplex.h slu_util.h supermatrix.h old_colamd.h slu_Cnames.h slu_ddefs.h slu_sdefs.h slu_zdefs.h Let me know if there are any issues with it. cu C. -- Debian Developer - http://people.debian.org/~prudhomm/ Scientific computing packages maintainer Fingerprint = 3703 50DE 7A9F 024E 0F26 0D07 A18F B40B D4BE 1450
Bug#433177: exim4: [INTL:th] Updated Thai Debconf translation
tags #433177 confirmed pending thanks On Sun, Jul 15, 2007 at 02:56:44PM +0700, Theppitak Karoonboonyanan wrote: > Please update Thai debconf translation, as attached. Committed to svn, thanks. Greetings Marc -- - Marc Haber | "I don't trust Computers. They | Mailadresse im Header Mannheim, Germany | lose things."Winona Ryder | Fon: *49 621 72739834 Nordisch by Nature | How to make an American Quilt | Fax: *49 621 72739835 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#201448: I plan to upload version 3.9 to the archive (main)
On Sun, Jul 15, 2007 at 02:28:35AM -0400, Simon Ruggier wrote: > I happen to have written source packages for various versions of > stepmania with cdbs-style rules files, hosted at > http://www.eng.uwaterloo.ca/~sruggier/files/apt/. There are three > versions - one of the 4.0 versions is from a snapshot, and the newest > version is checked directly out of CVS, and has a get-orig-source > target. If the CVS code were stable enough, it might have been > tempting to upload it, but unfortunately, it seems pretty buggy. Well, thanks, but the packaging itself is not the problem -- both Miriam and I already have local packages, and have had for some time. :-) /* Steinar */ -- Homepage: http://www.sesse.net/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433159: network-admin: fails to display any information
On Sun, Jul 15, 2007, Neil Williams wrote: > (network-admin:29688): Liboobs-WARNING **: There was an unknown error > communicating with the backends: Message did not receive a reply > (timeout by message bus) > > (network-admin:29688): Liboobs-WARNING **: There was an unknown error > communicating with the backends: Message did not receive a reply > (timeout by message bus) This is a known bug in libnet-dbus-perl; the workaround is to downgrade dbus to 1.0.x. I'm not reassigning the bug to avoid receiving further reports. -- Loïc Minier
Bug#433166: totem-xine: totem stopped working after recent upgrade: no codec is known anymore
On Sun, Jul 15, 2007, Carlo Wood wrote: > I've been totem for a long time without problems. > After my last apt-get update/upgrade, totem stops > playing anyting. Any movie that I try to open results > in a popup says something like: > Video codec 'XviD' is not handled. You might need to install additional > plugins to be able to play some types of movies. > where the codec name is whatever is needed. > No codec seems to work anymore. Can you please try with xine itself instead? -- Loïc Minier
Bug#433181: openssh: Manpages are outdated
Package: openssh Version: 1:4.6p1-4 Severity: normal Manpages for ssh, scp, sshd etc. date from September 25, 1999 while there are versions dating from June 12, 2007 on OpenSSH's website. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433182: adduser: [INTL:fi] Finnish translation update
Package: adduser Version: 3.102 Severity: wishlist Tags: l10n patch Updated fi.po included -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-4-amd64 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages adduser depends on: ii debconf [debconf-2.0] 1.5.11 Debian configuration management sy ii passwd 1:4.0.18.1-7 change and administer password and ii perl-base 5.8.8-7 The Pathologically Eclectic Rubbis adduser recommends no packages. -- debconf information excluded Need Mail bonding? Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users. http://answers.yahoo.com/dir/?link=list&sid=396546091# #Translators, if you are not familiar with the PO format, gettext #documentation is worth reading, especially sections dedicated to #this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # #Some information specific to po-debconf are available at #/usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # #Developers do not need to manually edit POT or PO files. # msgid "" msgstr "" "Project-Id-Version: adduser\n" "Report-Msgid-Bugs-To: [EMAIL PROTECTED]" "POT-Creation-Date: 2007-06-30 09:45+0200\n" "PO-Revision-Date: 2007-07-14 18:31+0200\n" "Last-Translator: Sami Kallio <[EMAIL PROTECTED]>\n" "Language-Team: Finnish <[EMAIL PROTECTED]>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" #| msgid "Do you want system wide readable home directories?" #. Type: boolean #. Description #: ../templates:2001 msgid "Do you want system-wide readable home directories?" msgstr "Voivatko kaikki järjestelmän käyttäjät lukea kotihakemistoja?" #| msgid "" #| "Normally, home directories can be viewed by all users on the system. If " #| "you want to increase the security/privacy on your system, you might want " #| "your home directories only readable by the user. If you are unsure, " #| "enable system wide readable home directories." #. Type: boolean #. Description #: ../templates:2001 msgid "By default, users' home directories are readable by all users on the system. If you want to increase security and privacy, you might want home directories to be readable only for their owners. But if in doubt, leave this option enabled." msgstr "Oletuksena kotihakemistot ovat kaikkien käyttäjien luettavissa. Jos haluat lisätä järjestelmäsi tietoturvaa ja yksityisyyden suojaa, voit antaa lukuoikeuden vain hakemiston omistajalle. Jos olet epävarma, jätä tämä valinta oletusarvoiseksi." #| msgid "" #| "This will only affect home directories of users added with the adduser " #| "program later." #. Type: boolean #. Description #: ../templates:2001 #, fuzzy msgid "This will only affect home directories of users added from now on with the adduser command." msgstr "" "Tämä vaikuttaa vain adduser-ohjelmalla luotujen käyttäjien\n" "kotihakemistoihin."
Bug#433183: djbdns-installer: init.d script failed if installed in non-FHS fashion
Package: djbdns-installer Version: 1.05-11 Severity: normal Currently the djbdns package built by this package contains a /etc/init.d/djbdns script that assumes a FHS-fashion installation. The service directory is assumed to be /var/lib/svscan, while in non-FHS-fashion it would be /service, so the script would fail to {start|stop|restart} djbdns. -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (990, 'stable'), (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-4-686 Locale: LANG=C, LC_CTYPE=zh_TW.UTF-8 (charmap=UTF-8) Versions of packages djbdns-installer depends on: ii daemontools 0.76-9 A collection of tools for managing ii daemontools-installer 0.76-9.2 Installer package for building dae ii debhelper 5.0.42 helper programs for debian/rules ii dpkg-dev 1.13.25package building tools for Debian ii fakeroot 1.5.10 Gives a fake root environment ii gcc 4:4.1.1-15 The GNU C compiler ii make 3.81-2 The GNU version of the "make" util ii patch 2.5.9-4Apply a diff file to an original ii sudo 1.6.8p12-4 Provide limited super user privile ii wget 1.10.2-2 retrieves files from the web djbdns-installer recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433180: bug-buddy: Bug buddy error - failed to parse the xml-rpc response
Hi, On Sun, Jul 15, 2007, LUK ShunTim wrote: > While trying to report a bug on natutilus, I got this error with bug-buddy. > The screen shot of the error messages can be seen here: > http://www.imagecows.com/uploads/7e91-Screenshot-BugBuddy-crash.png Could you please run a network sniffer such as "wireshark" and capture the traffic when you're submitting the bug? The problem here is that the server responds with an error in response to the contents of your submission. Thanks, -- Loïc Minier
Bug#433184: /usr/share/xsessions/fluxbox.desktop is missing
Package: fluxbox Version: 1.0~rc3-1 Severity: normal --- Please enter the report below this line. --- The fluxbox.desktop file is not included in this package Version. --- System information. --- Architecture: i386 Kernel: Linux 2.6.22.1 Debian Release: lenny/sid 500 testing security.debian.org 500 testing mirror.noreply.org 500 testing ftp.debian-unofficial.org 500 testing ftp.ch.debian.org --- Package information. --- Depends (Version) | Installed ==-+- menu (>= 2.1.19) | 2.1.34 libc6 (>= 2.5-5) | 2.5-9+b1 libfontconfig1 (>= 2.4.0) | 2.4.2-1.2 libgcc1(>= 1:4.2-20070516) | 1:4.2-20070627-1 libice6 (>= 1:1.0.0) | 1:1.0.3-2 libsm6 | 2:1.0.3-1+b1 libstdc++6 (>= 4.2-20070516) | 4.2-20070627-1 libx11-6 | 2:1.0.3-7 libxext6 | 1:1.0.3-2 libxft2 (>> 2.1.1) | 2.1.12-2 libxinerama1 | 1:1.0.2-1 libxpm4| 1:3.5.6-3 libxrandr2(>= 2:1.2.0) | 2:1.2.1-1 libxrender1| 1:0.9.2-1 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#99324: Change of address
Thank you for your e-mail. Please note that from 2nd April 2007 my e-mail address has changed to: [EMAIL PROTECTED] Please re-send to that address as I will not have received your message. Regards, Adrian Organ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433151: "forground" and fflush
package inoticoming tags 433151 + pending thanks * Robert Edmonds <[EMAIL PROTECTED]> [070715 00:08]: > I found another instance of "forground". I should slowly ask myself, why I spelled the option itself with "e"... ;-) > Also, I wonder if you'd be willing to fflush(stdout); when output is > directed to stdout? I run inoticoming with --foreground under > runit/svlogd and the output of inoticoming and the output of the command > it invokes are not properly intermingled in the svlogd log file unless I > have inoticoming and the invoked command flush stdout after each line. I've added setlinebuf() calls to the code in cvs. That should have the same effect and I do not have to remember to add flush if I add other code writing to stdout. Thanks for reporting, Bernhard R. Link -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433155: ekiga: Cannot upgrade due to conflict
reassign 433155 libopal-2.2 forcemerge #433152 433155 stop On Sun, Jul 15, 2007, Ian McDonald wrote: > Ekiga will not upgrade as below. > dpkg: error processing > /var/cache/apt/archives/libopal-2.2_2.2.8~dfsg1-1_i386.deb > (--unpack): > trying to overwrite `/usr/lib/libopal.so.2.2', which is > also in package libopal-2.2.0 -- Loïc Minier
Bug#433166: totem-xine: totem stopped working after recent upgrade: no codec is known anymore
On Sun, Jul 15, 2007, Carlo Wood wrote: > I've been totem for a long time without problems. > After my last apt-get update/upgrade, totem stops > playing anyting. Any movie that I try to open results > in a popup says something like: > Video codec 'XviD' is not handled. You might need to install additional > plugins to be able to play some types of movies. > where the codec name is whatever is needed. > No codec seems to work anymore. What if you install libxine1-ffmpeg? -- Loïc Minier
Bug#433185: Missing conflicts/replaces
Package: libpt-dev Version: 1.10.7~dfsg1-2 Severity: serious Hi, You're missing a conflicts/replaces for the file move of the symlink: dpkg : erreur de traitement de /var/cache/apt/archives/libpt-dev_1.10.7~dfsg1-2_i386.deb (--unpack) : tentative de remplacement de « /usr/lib/libpt.so.1.10 », qui appartient aussi au paquet libpt-1.10.0 Préparation du remplacement de libpt-1.10.0 1.10.2-2+b1 (en utilisant .../libpt-1.10.0_1.10.7~dfsg1-2_i386.deb) ... Bye, -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.22-rc7-686 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages libpt-dev depends on: ii libc6-dev2.6-2 GNU C Library: Development Librari ii libexpat1-dev1.95.8-3.4 XML parsing C library - developmen ii libldap2-dev 2.1.30-13.4 OpenLDAP development libraries ii libpt-1.10.0 1.10.7~dfsg1-2 Portable Windows Library ii libsasl2-dev 2.1.22.dfsg1-13 Development files for SASL authent ii libsdl1.2-dev1.2.11-9Simple DirectMedia Layer developme ii libssl-dev 0.9.8e-5SSL development libraries, header libpt-dev recommends no packages. -- no debconf information -- Loïc Minier
Bug#433186: ocsinventory-server: [INTL:pt] Portuguese translation for debconf messages
Package: ocsinventory-server Version: 1.01-1 Tags: l10n, patch Severity: wishlist Portuguese translation for csinventory-server's debconf messages. Translator: Américo Monteiro <[EMAIL PROTECTED]> Feel free to use it. For translation updates please contact 'Last Translator' or the Portuguese Translation Team . -- Best regards, Miguel Figueiredo "Traduz" - Portuguese Translation Team http://www.DebianPT.org pt.po Description: application/gettext
Bug#356182: please improve mass-submitter-changing (aka new email address)
reassign 356182 devscripts forcemerge 433169 356182 thanks On Fri, 10 Mar 2006, Bastian Venthur wrote: > This is a pretty uncomfortable, especially when you have filled more > than, say 50 bugs. > > A better solution would be to allow a pattern like: > > submitter all > > where "all" is a wildcard and stands for all bugs filled by the old > address. The solution is actually to make bts (the command in devscripts) slightly more powerful, which I have done with the patch for #433169. If you apply that patch, you can then do the following: bts submitter $(bts select submitter:[EMAIL PROTECTED]) [EMAIL PROTECTED]; or similar bouts of madness. Don Armstrong -- It was said that life was cheap in Ankh-Morpork. This was, of course, completely wrong. Life was often very expensive; you could get death for free. -- Terry Pratchet _Pyramids_ p25 http://www.donarmstrong.com http://rzlab.ucr.edu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433187: linux-2.6 - [sparc64-smp] produces unkillable processes
Package: linux-2.6 Version: 2.6.18-5 Severity: grave Forwarded: [EMAIL PROTECTED] sparc64 kernels produces unkillable dpkg-query processes (only seen in a buildd environment yet). Each process sucks one cpu and 3GiB of memory. Even the OOM killer is not able to kill them. This problem exists up to 2.6.21 (and most likely also .22) and makes it mostly impossible to run a reliable buildd. The problem was forwarded to upstream[1] but no response yet. Bastian [1]: http://article.gmane.org/gmane.linux.ports.sparc/7867 -- Spock: The odds of surviving another attack are 13562190123 to 1, Captain. signature.asc Description: Digital signature
Bug#433164: monit: Segfault in 3-5 seconds after start
Alexey Bestchekov wrote: > #0 0x2ace3273d8d7 in _IO_vfscanf_internal () from /lib/libc.so.6 > #1 0x2ace3274c395 in vsscanf () from /lib/libc.so.6 > #2 0x2ace32747ca8 in sscanf () from /lib/libc.so.6 > #3 0x0041f7b7 in get_response (s=0x56ec30, H=0x7fff78d03a40) at > protocols/http.c:473 > #4 0x0041fb51 in do_redirect (H=0x7fff78d03a40) at > protocols/http.c:431 > > the same problem exist in newer upstream version (4.9) > Since the coredump is in libc/vfscanf, I'm guessing this may be 64 bit + locale related. Could you try these steps? 1. Unset LANG LC_CTYPE LC_ALL and other locale related variables and try to start. 2. print the variables to get_response() (like gdb monit ; run ; up ; up ; up ; print s; print H ) 3. (a bit more work) upgrade to a newer libc and recompile with that. I'm also CC'ing upstream if they have some ideas. Regards, Stefan > -- System Information: > Debian Release: 4.0 > APT prefers stable > APT policy: (500, 'stable') > Architecture: amd64 (x86_64) > Shell: /bin/sh linked to /bin/bash > Kernel: Linux 2.6.18-4-amd64 > Locale: LANG=ru_RU.KOI8-R, LC_CTYPE=ru_RU.koi8r (charmap=KOI8-R) (ignored: > LC_ALL set to ru_RU.koi8r) > > Versions of packages monit depends on: > ii libc6 2.3.6.ds1-13 GNU C Library: Shared > libraries > ii libssl0.9.8 0.9.8c-4 SSL shared libraries > > monit recommends no packages. > > -- no debconf information > >
Bug#428007: Fwd: Accepted superlu 3.0+20070106-1 (source i386)
Adam, the new version of superlu has been accepted cu C. -- Debian Developer - http://people.debian.org/~prudhomm/ Scientific computing packages maintainer Fingerprint = 3703 50DE 7A9F 024E 0F26 0D07 A18F B40B D4BE 1450 --- Begin Message --- -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.7 Date: Sun, 15 Jul 2007 09:52:32 +0200 Source: superlu Binary: libsuperlu3-dev libsuperlu3 Architecture: source i386 Version: 3.0+20070106-1 Distribution: unstable Urgency: low Maintainer: Debian Scientific Computing Team <[EMAIL PROTECTED]> Changed-By: Christophe Prud'homme <[EMAIL PROTECTED]> Description: libsuperlu3 - Direct solution of large, sparse systems of linear equations libsuperlu3-dev - Direct solution of large, sparse systems of linear equations Changes: superlu (3.0+20070106-1) unstable; urgency=low . [ Rafael Laboissiere ] * debian/control: Added XS-Vcs-Svn and XS-Vcs-Browser fields to the Source section . [Christophe Prud'homme] * New upstream release Files: f2f5a6a7222124a73cf0dcdd31b5d4c8 865 devel optional superlu_3.0+20070106-1.dsc 94f364dc5b6ab8d62f9f1621d3e9fe35 1134097 devel optional superlu_3.0+20070106.orig.tar.gz 614472179c851f3dd12c7e548d0636b9 4713 devel optional superlu_3.0+20070106-1.diff.gz 5f680468e1fb0bb0d5c716425e9c69dc 547548 libdevel optional libsuperlu3-dev_3.0+20070106-1_i386.deb f8b50346e0b812c1e26e929239da26e0 161618 libs optional libsuperlu3_3.0+20070106-1_i386.deb -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFGmdUboY+0C9S+FFARAh7dAJ4+nUoNWF+6mJtx6Wibh0y+Wh3mtwCeOdgX joVn3od5XdxTvSLHBo2JfUY= =CcLV -END PGP SIGNATURE- Accepted: libsuperlu3-dev_3.0+20070106-1_i386.deb to pool/main/s/superlu/libsuperlu3-dev_3.0+20070106-1_i386.deb libsuperlu3_3.0+20070106-1_i386.deb to pool/main/s/superlu/libsuperlu3_3.0+20070106-1_i386.deb superlu_3.0+20070106-1.diff.gz to pool/main/s/superlu/superlu_3.0+20070106-1.diff.gz superlu_3.0+20070106-1.dsc to pool/main/s/superlu/superlu_3.0+20070106-1.dsc superlu_3.0+20070106.orig.tar.gz to pool/main/s/superlu/superlu_3.0+20070106.orig.tar.gz -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] --- End Message ---
Bug#433188: ikiwiki: img plugin does not always need to provide a link
Package: ikiwiki Version: 2.3 Severity: wishlist Tags: patch Hi, currently images included with the image plugin always provide a link to the image. Sometimes this may not be needed, it may be enough to just show the image. Currently one has to use HTML to do that. Possible patch, using a 'link="no"' parameter to implement this: diff --git a/img.pm b/img.pm index a453a49..6281896 100644 --- a/img.pm +++ b/img.pm @@ -23,6 +23,12 @@ sub preprocess (@) { #{{{ my $size = $params{size} || $imgdefaults{$params{page}}->{size} || 'full'; my $alt = $params{alt} || $imgdefaults{$params{page}}->{alt} || ''; + $params{link} = 'yes' unless exists($params{link}); + my $link = 'yes'; + if ($params{link} eq 'no') { + $link = 'no'; + } + if ($image eq 'defaults') { $imgdefaults{$params{page}} = { size => $size, @@ -96,12 +102,22 @@ sub preprocess (@) { #{{{ return "[[img ".sprintf(gettext("failed to determine size of image %s"), $file)."]]"; } - return ''; + if ($link eq 'no') { + return ''; + } + else { + return ''; + } } #}}} 1 Thanks, Nis -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433190: inhibit /etc/initramfs-tools/conf.d/resume creation in chroot
Package: initramfs-tools Version: 0.89 Severity: wishlist Tags: patch Hi maks, When installing initramfs-tools in a chroot, I'd like to propose that /etc/initramfs-tools/conf.d/resume not be created. debian-live and other custom debian distributions build their system up in a chroot environment, therefore it is not good for the resulting initramfs-tools generated initial ramdisk to be configured for the system that hosted the original chroot. Plus, who can use suspend in a chroot environment? ;-) Patch is attached. chrooted() function borrowed from udev's postinst. Thanks, Kel. diff -Nrup initramfs-tools-0.89/debian/initramfs-tools.preinst initramfs-tools-0.89-patched/debian/initramfs-tools.preinst --- initramfs-tools-0.89/debian/initramfs-tools.preinst 2007-05-29 08:00:39.0 +1000 +++ initramfs-tools-0.89-patched/debian/initramfs-tools.preinst 2007-07-15 18:47:16.0 +1000 @@ -2,6 +2,16 @@ set -e +chrooted() { + # borrowed from udev's postinst + if [ "$(stat -c %d/%i /)" = "$(stat -Lc %d/%i /proc/1/root 2>/dev/null)" ]; then + # the devicenumber/inode pair of / is the same as that of /sbin/init's + # root, so we're *not* in a chroot and hence return false. + return 1 + fi + return 0 +} + case "$1" in install) mkdir -p /etc/initramfs-tools/conf.d @@ -15,7 +25,8 @@ case "$1" in if [ -e /etc/mkinitrd/mkinitrd.conf ]; then . /etc/mkinitrd/mkinitrd.conf fi - if [ -n "${RESUME}" ]; then + # write conf.d/resume if not in a chroot + if [ -n "${RESUME}" ] && ! chrooted; then echo "RESUME=${RESUME}" > /etc/initramfs-tools/conf.d/resume fi
Bug#433189: eagle-usb: [INTL:pt] Portuguese translation for debconf messages
Package: eagle-usb Version: 2.1.1-3 Tags: l10n, patch Severity: wishlist Portuguese translation for eagle-usb's debconf messages. Translator: Américo Monteiro <[EMAIL PROTECTED]> Feel free to use it. For translation updates please contact 'Last Translator' or the Portuguese Translation Team . -- Best regards, Miguel Figueiredo "Traduz" - Portuguese Translation Team http://www.DebianPT.org pt.po Description: application/gettext
Bug#429244: [Fwd: invalid Joliet table (was: genisoimage creates invalid iso images)]
A Message from Jörg Schilling --- Begin Message --- Hi, do not expect to get any useful answer/help for your Debian bugreport. The projct is dead. BTW: I cannot see any problems with your data using a recent original software: http://cdrecord.berlios.de/ ftp://ftp.berlios.de/pub/cdrecord/alpha/ The debian program is a bad hack on a 2 year old version of mkisofs. Jörg -- EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin [EMAIL PROTECTED](uni) [EMAIL PROTECTED] (work) Blog: http://schily.blogspot.com/ URL: http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily --- End Message ---
Bug#429244: invalid Joliet table (was: genisoimage creates invalid iso images)
Am Samstag, den 14.07.2007, 22:13 +0200 schrieb Joerg Schilling: > Hi, > > do not expect to get any useful answer/help for your Debian bugreport. > The projct is dead. At least it does not violate against the GPL. > > BTW: I cannot see any problems with your data using a recent original > software: Your software violates against the GPL, because it uses libscg which is under CDDL. And as a Fellow of the Free Software Foundation Europe and a proud Debian user, I will never use software which violates against the GPL. > > http://cdrecord.berlios.de/ > > ftp://ftp.berlios.de/pub/cdrecord/alpha/ > > > The debian program is a bad hack on a 2 year old version of mkisofs. See previous answers. > Jörg PS: Keep it public -- Julian Andres Klode IRC Nickname: juliank (Debian/OFTC + Freenode) Fellow of FSFE: https://www.fsfe.org/en/fellows/jak (No. 1049) Debian Wiki:http://wiki.debian.org/JulianAndresKlode Ubuntu Wiki:http://wiki.ubuntu.com/JulianAndresKlode In Launchpad: https://launchpad.net/~juliank Packages Overv: http://qa.debian.org/[EMAIL PROTECTED] Languages: German, English, [bit French] signature.asc Description: Dies ist ein digital signierter Nachrichtenteil
Bug#430272: fixed 430272 in 5.1.1-2
# Automatically generated email from bts, devscripts version 2.10.6 #The bugreport was only for lenny and sid, not stable fixed 430272 5.1.1-2 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433191: xli: please add -quiet to mailcap entries
Package: xli Version: 1.17.0-22 Severity: wishlist Tags: patch Please add -quiet to the options of xli in the mailcap entries. Without this it always outputs multiple lines of image information which garbles the output of the text browser I'm starting it from. Hochachtungsvoll, Bernhard R. Link diff -r -u -N xli-1.17.0.old/debian/mime xli-1.17.0/debian/mime --- xli-1.17.0.old/debian/mime 2007-06-30 14:05:33.0 +0200 +++ xli-1.17.0/debian/mime 2007-06-30 13:27:27.0 +0200 @@ -1,13 +1,13 @@ -image/png; /usr/X11R6/bin/xli '%s'; test=test -n "$DISPLAY"; description=PNG Image; nametemplate=%s.png; priority=3 -image/x-ms-bmp; /usr/X11R6/bin/xli '%s'; test=test -n "$DISPLAY"; description=BMP Image; nametemplate=%s.bmp; priority=3 -image/x-cmu-raster; /usr/X11R6/bin/xli '%s'; test=test -n "$DISPLAY"; description=CMU-RasterFile Image; nametemplate=%s.ras; priority=3 -image/g3fax; /usr/X11R6/bin/xli '%s'; test=test -n "$DISPLAY"; description=G3-FAX Image; nametemplate=%s.g3; priority=3 -image/gif; /usr/X11R6/bin/xli '%s'; test=test -n "$DISPLAY"; description=GIF Image; nametemplate=%s.gif; priority=3 -image/jpeg; /usr/X11R6/bin/xli '%s'; test=test -n "$DISPLAY"; description=JPEG Image; nametemplate=%s.jpg; priority=3 -image/targa; /usr/X11R6/bin/xli '%s'; test=test -n "$DISPLAY"; description=TARGA Image; nametemplate=%s.tga; priority=3 -image/x-portable-bitmap; /usr/X11R6/bin/xli '%s'; test=test -n "$DISPLAY"; description=PBM Image; nametemplate=%s.pbm; priority=3 -image/x-portable-graymap; /usr/X11R6/bin/xli '%s'; test=test -n "$DISPLAY"; description=PGM Image; nametemplate=%s.pgm; priority=3 -image/x-portable-pixmap; /usr/X11R6/bin/xli '%s'; test=test -n "$DISPLAY"; description=PPM Image; nametemplate=%s.ppm; priority=3 -image/x-rgb; /usr/X11R6/bin/xli '%s'; test=test -n "$DISPLAY"; description=RGB Image; nametemplate=%s.rgb; priority=3 -image/x-xbitmap; /usr/X11R6/bin/xli '%s'; test=test -n "$DISPLAY"; description=XBM Image; nametemplate=%s.xbm; priority=3 -image/x-xpixmap; /usr/X11R6/bin/xli '%s'; test=test -n "$DISPLAY"; description=XPM Image; nametemplate=%s.xpm; priority=3 +image/png; /usr/bin/xli -quiet '%s'; test=test -n "$DISPLAY"; description=PNG Image; nametemplate=%s.png; priority=3 +image/x-ms-bmp; /usr/bin/xli -quiet '%s'; test=test -n "$DISPLAY"; description=BMP Image; nametemplate=%s.bmp; priority=3 +image/x-cmu-raster; /usr/bin/xli -quiet '%s'; test=test -n "$DISPLAY"; description=CMU-RasterFile Image; nametemplate=%s.ras; priority=3 +image/g3fax; /usr/bin/xli -quiet '%s'; test=test -n "$DISPLAY"; description=G3-FAX Image; nametemplate=%s.g3; priority=3 +image/gif; /usr/bin/xli -quiet '%s'; test=test -n "$DISPLAY"; description=GIF Image; nametemplate=%s.gif; priority=3 +image/jpeg; /usr/bin/xli -quiet '%s'; test=test -n "$DISPLAY"; description=JPEG Image; nametemplate=%s.jpg; priority=3 +image/targa; /usr/bin/xli -quiet '%s'; test=test -n "$DISPLAY"; description=TARGA Image; nametemplate=%s.tga; priority=3 +image/x-portable-bitmap; /usr/bin/xli -quiet '%s'; test=test -n "$DISPLAY"; description=PBM Image; nametemplate=%s.pbm; priority=3 +image/x-portable-graymap; /usr/bin/xli -quiet '%s'; test=test -n "$DISPLAY"; description=PGM Image; nametemplate=%s.pgm; priority=3 +image/x-portable-pixmap; /usr/bin/xli -quiet '%s'; test=test -n "$DISPLAY"; description=PPM Image; nametemplate=%s.ppm; priority=3 +image/x-rgb; /usr/bin/xli -quiet '%s'; test=test -n "$DISPLAY"; description=RGB Image; nametemplate=%s.rgb; priority=3 +image/x-xbitmap; /usr/bin/xli -quiet '%s'; test=test -n "$DISPLAY"; description=XBM Image; nametemplate=%s.xbm; priority=3 +image/x-xpixmap; /usr/bin/xli -quiet '%s'; test=test -n "$DISPLAY"; description=XPM Image; nametemplate=%s.xpm; priority=3
Bug#433181: openssh: Manpages are outdated
severity 433181 minor thanks On Sun, Jul 15, 2007 at 10:18:43AM +0200, Yannick P. wrote: > Package: openssh > Version: 1:4.6p1-4 > Severity: normal > > Manpages for ssh, scp, sshd etc. date from September 25, 1999 while > there are versions dating from June 12, 2007 on OpenSSH's website. Are you sure this isn't simply that the datestamps on the man pages haven't been updated? -- Colin Watson [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#432369: xml-crimson: FTBFS: unable to resolve external entity: "project.dtd"
On Mon, Jul 09, 2007 at 05:24:07PM +, Lucas Nussbaum wrote: > Package: xml-crimson > version: 1:1.1.3-9 > Severity: serious > User: [EMAIL PROTECTED] > Usertags: qa-ftbfs-20070708 > Justification: FTBFS on i386 > > Hi, > > During a rebuild of all packages in sid, your package failed to build on i386. > > Relevant part: > make[1]: Entering directory `/build/user/xml-crimson-1.1.3' > make[1]: Nothing to be done for `update-config'. > make[1]: Leaving directory `/build/user/xml-crimson-1.1.3' > cd . && /usr/lib/jvm/java-gcj/bin/java -classpath > /usr/share/ant/lib/ant.jar:/usr/share/ant/lib/ant-launcher.jar:/usr/share/ant/lib/ant-launcher.jar:/usr/lib/jvm/java-gcj/lib/tools.jar > -Dant.home=/usr/share/ant org.apache.tools.ant.Main -Dcompile.debug=true > -Dcompile.optimize=true jar > Buildfile: build.xml > > BUILD FAILED > /build/user/xml-crimson-1.1.3/build.xml:1: unable to resolve external entity: > "project.dtd" This is an issue in GCJ. I will track this down and report a bug against it. Cheers, Michael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433192: python-turbogears: Wrong imports for ElementTree if running with python2.5
Package: python-turbogears Version: 1.0.2.2-1 Severity: normal Tags: patch Hi, turbogears uses elementtree. As elementtree was included in python2.5 the python-elementtree doesn't support python2.5. Therefore the imports in turbogears needs to be fixed to import the correct module when running with python2.5. I've filed upstream a bug report about it: http://trac.turbogears.org/ticket/1441 The attached patch tries to import xml.etree first and fall-backs to importing elementtree. It was applied into upstream svn as rev3262: http://trac.turbogears.org/changeset/3262 Michael Index: turbogears/command/i18n.py === --- turbogears/command/i18n.py (revision 3250) +++ turbogears/command/i18n.py (working copy) @@ -10,7 +10,12 @@ import optparse import tempfile -from elementtree.ElementTree import ElementTree +try: +# try the python 2.5 way +from xml.etree.cElementTree import ElementTree, XML +except ImportError: +# then try the python 2.4 way +from elementtree.ElementTree import ElementTree import formencode import turbogears Index: turbogears/toolbox/admi18n/pygettext.py === --- turbogears/toolbox/admi18n/pygettext.py (revision 3250) +++ turbogears/toolbox/admi18n/pygettext.py (working copy) @@ -169,7 +169,13 @@ import operator import codecs -from elementtree.ElementTree import ElementTree, XML +try: +# try the python 2.5 way +from xml.etree.cElementTree import ElementTree, XML +except ImportError: +# then try the python 2.4 way +from elementtree.ElementTree import ElementTree, XML + from turbogears.util import fixentities __version__ = '1.5'
Bug#433049: #433049
Bastian Blank wrote: tags 433049 moreinfo thanks Please test if this is fixed in 2.6.21/.22. Bastian Hi, tested on 2.6.21, result = success (sensors isn't stucked and hardware sensors reading is ok) not tested back on 2.6.18 after a reboot cause of another issue with... an init script/udev (stuck on floppy drive query ?, no floppy drive in my box, boot was ok previously). Anyone have suggestions about this issue ? Regards. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#419890: include aoTuV patch
Hi, Adeodato. Thanks for your answer. On Jul 08 2007, Adeodato Simó wrote: > * Rogério Brito [Sat, 07 Jul 2007 19:55:52 -0300]: > > > Besides that, what do you mean with "these characteristics"? That it > > is an "intrusive" patch? > > Intrusive, wishlist. Would there then, be the possibility of having another binary package built from the libvorbis sources producing, say, libvorbis-aotuv, for those that would prefer that as the encoder of choice? This would, indeed, be a quite nice addition to the package, especially for those that want to encode voice (I use it to encode my classes and, at quality -2, it gives superb crispness, which is not achieved by the reference encoder at level -1 or even 0). Some words like "Caution! This package contains an experimental patch" in the description of the binary package would be sufficient, I guess. Please let me know what you think. > > I get a blank page with just a link to the parent package. > > It's a Bazaar branch, so you have to retrieve it with: > > % bzr get http://bzr.debian.org/pkg-xiph/libvorbis Sorry. I am not used to bazaar. I thought that it was just like, say, websvn, where you can browse the sources without having to use a specific tool. But it was nice to learn this behavior, as this is my first contact with bazaar. :-) Thanks, Rogério Brito. -- Rogério Brito : [EMAIL PROTECTED],ime.usp}.br : GPG key 1024D/7C2CAEB8 http://www.ime.usp.br/~rbrito : http://meusite.mackenzie.com.br/rbrito Projects: algorithms.berlios.de : lame.sf.net : vrms.alioth.debian.org
Bug#429244: invalid Joliet table (was: genisoimage creates invalid iso images)
Julian Andres Klode <[EMAIL PROTECTED]> wrote: > Am Samstag, den 14.07.2007, 22:13 +0200 schrieb Joerg Schilling: > > Hi, > > > > do not expect to get any useful answer/help for your Debian bugreport. > > The projct is dead. > At least it does not violate against the GPL. > > > > BTW: I cannot see any problems with your data using a recent original > > software: > Your software violates against the GPL, because it uses libscg > which is under CDDL. > And as a Fellow of the Free Software Foundation Europe > and a proud Debian user, I will never use software which violates > against the GPL. These kind of lies are boring! Get informed and do not spread lies that have been created by people with commercial interests. IF _you_ repeat the lies from a small numbers of OSS haters in Debian, _you_ are actively part of the defamation campaign. Cdrtools do not have any license problem. Inform yourself about the term "work" that the GPL is based on and read GPLv2 § 2 last paragraph. Also do NOT believe the incorrect GPL FAQ from the FSF that is completely based in the irrelevent term "linking" which does not appear anywhere in the GPL. The Debiam speudofork has been created out of hate and hate cannot create free software. BTW: YOU dod break a law by pulling a private mail into the public! Jörg -- EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin [EMAIL PROTECTED](uni) [EMAIL PROTECTED] (work) Blog: http://schily.blogspot.com/ URL: http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily
Bug#433193: evince-gtk: Only ASCII characters are copied to clipboard
Package: evince-gtk Version: 0.9.0-1 Severity: normal -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Copying a text containing non-ASCII characters results in those characters being omitted from the copy action. Pasting in another application afterwards proves this; those characters are just missing. Have a look at the example PDF containing the German word "Mühle" (mill). Copying and pasting results in "Mhle". I tested this for some other characters too and it seems that Evince cannot handle Unicode here. - -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.21-2-k7 (SMP w/1 CPU core) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to de_DE.UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages evince-gtk depends on: ii gnome-icon-theme 2.18.0-3 GNOME Desktop icon theme ii gs-esp [gs] 8.15.3.dfsg.1-1The Ghostscript PostScript interpr ii gs-gpl [gs] 8.56.dfsg.1-1.1The GPL Ghostscript PostScript int ii libatk1.0-0 1.18.0-2 The ATK accessibility toolkit ii libc6 2.6-2 GNU C Library: Shared libraries ii libcairo2 1.4.10-1 The Cairo 2D vector graphics libra ii libdbus-1-3 1.1.1-3simple interprocess messaging syst ii libdbus-glib-1-2 0.74-1 simple interprocess messaging syst ii libdjvulibre153.5.19-2 Runtime support for the DjVu image ii libfontconfig12.4.2-1.2 generic font configuration library ii libfreetype6 2.3.5-1FreeType 2 font engine, shared lib ii libgconf2-4 2.18.0.1-3 GNOME configuration database syste ii libglade2-0 1:2.6.1-1 library to load .glade files at ru ii libglib2.0-0 2.12.12-1+b1 The GLib library of C routines ii libgnome-keyring0 0.8.1-2GNOME keyring services library ii libgnomevfs2-01:2.18.1-3+b1 GNOME Virtual File System (runtime ii libgtk2.0-0 2.10.13-1.1~macmenubar The GTK+ graphical user interface ii libjpeg62 6b-13 The Independent JPEG Group's JPEG ii libkpathsea4 2007-12TeX Live: path search library for ii liborbit2 1:2.14.7-0.1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.16.4-2 Layout and rendering of internatio ii libpng12-01.2.15~beta5-2 PNG library - runtime ii libpoppler-glib1 0.5.4-6PDF rendering library (GLib-based ii libstdc++64.2-20070712-1 The GNU Standard C++ Library v3 ii libtiff4 3.8.2-7Tag Image File Format (TIFF) libra ii libx11-6 2:1.0.3-7 X11 client-side library ii libxcursor1 1:1.1.8-2 X cursor management library ii libxext6 1:1.0.3-2 X11 miscellaneous extension librar ii libxfixes31:4.0.3-2 X11 miscellaneous 'fixes' extensio ii libxi62:1.1.1-1 X11 Input extension library ii libxinerama1 1:1.0.2-1 X11 Xinerama extension library ii libxml2 2.6.29.dfsg-1 GNOME XML library ii libxrandr22:1.2.1-1 X11 RandR extension library ii libxrender1 1:0.9.2-1 X Rendering Extension client libra ii zlib1g1:1.2.3.3.dfsg-5 compression library - runtime evince-gtk recommends no packages. - -- no debconf information -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iD4DBQFGmfk4YfUFJ3ewsJgRAvdcAJjoGvt7d9o+BCY4XiU8RnPwrS44AKCJ0ZNc YKPLDrl+Q5nOK/1wAF3hfQ== =gbHs -END PGP SIGNATURE- mill.pdf Description: Adobe PDF document
Bug#352681: still occurs
Try deleting ~/.kde/share/config/katapultrc signature.asc Description: This is a digitally signed message part
Bug#419100: workrave: Fixed, but now a new problem occurs...
Package: workrave Version: 1.8.4-4 Followup-For: Bug #419100 The latest version doesn't crash anymore at start up, but a new problem arises: it doesn't work. The counters aren't starting even while I'm writing this message. I checked the mode, and it's on Normal, not on Suspended or Quiet... -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.21-2-k7 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages workrave depends on: ii libart-2.0-22.3.19-3 Library of functions for 2D graphi ii libatk1.0-0 1.18.0-2 The ATK accessibility toolkit ii libbonobo2-02.18.0-2 Bonobo CORBA interfaces library ii libbonoboui2-0 2.18.0-5 The Bonobo UI library ii libc6 2.5-9+b1 GNU C Library: Shared libraries ii libcairo2 1.4.10-1 The Cairo 2D vector graphics libra ii libcairomm-1.0-11.2.4-2 C++ wrappers for Cairo (shared lib ii libfontconfig1 2.4.2-1.2generic font configuration library ii libgcc1 1:4.2-20070627-1 GCC support library ii libgconf2-4 2.18.0.1-3 GNOME configuration database syste ii libgconfmm-2.6-1c2 2.14.2-1 C++ wrappers for GConf (shared lib ii libglade2-0 1:2.6.1-1library to load .glade files at ru ii libglademm-2.4-1c2a 2.6.2-2 C++ wrappers for libglade2 (shared ii libglib2.0-02.12.12-1+b1 The GLib library of C routines ii libglibmm-2.4-1c2a 2.12.7-1 C++ wrapper for the GLib toolkit ( ii libgnet2.0-02.0.7-1 GNet network library ii libgnome-keyring0 0.8.1-2 GNOME keyring services library ii libgnome-vfsmm-2.6-1c2a 2.16.1-0.1 C++ wrappers for GnomeVFS (shared ii libgnome2-0 2.18.0-4 The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.14.0-3 A powerful object-oriented display ii libgnomecanvasmm-2.6-1c 2.14.0-1 C++ wrappers for libgnomecanvas2 ( ii libgnomemm-2.6-1c2 2.14.0-1 C++ wrappers for libgnome (shared ii libgnomeui-02.18.1-2 The GNOME 2 libraries (User Interf ii libgnomeuimm-2.6-1c2a 2.14.0-1 C++ wrappers for libgnomeui (share ii libgnomevfs2-0 1:2.18.1-2 GNOME Virtual File System (runtime ii libgtk2.0-0 2.10.13-1The GTK+ graphical user interface ii libgtkmm-2.4-1c2a 1:2.8.8-1C++ wrappers for GTK+ 2.4 (shared ii libice6 1:1.0.3-2X11 Inter-Client Exchange library ii liborbit2 1:2.14.7-0.1 libraries for ORBit2 - a CORBA ORB ii libpanel-applet2-0 2.18.2-2 library for GNOME Panel applets ii libpango1.0-0 1.16.4-1 Layout and rendering of internatio ii libpopt01.10-3 lib for parsing cmdline parameters ii libsigc++-2.0-0c2a 2.0.17-2 type-safe Signal Framework for C++ ii libsm6 2:1.0.3-1+b1 X11 Session Management library ii libstdc++6 4.2-20070627-1 The GNU Standard C++ Library v3 ii libx11-62:1.0.3-7X11 client-side library ii libxcursor1 1:1.1.8-2X cursor management library ii libxext61:1.0.3-2X11 miscellaneous extension librar ii libxfixes3 1:4.0.3-2X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.1-4X11 Input extension library ii libxinerama11:1.0.2-1X11 Xinerama extension library ii libxml2 2.6.29.dfsg-1GNOME XML library ii libxmu6 1:1.0.3-1X11 miscellaneous utility library ii libxrandr2 2:1.2.1-1X11 RandR extension library ii libxrender1 1:0.9.2-1X Rendering Extension client libra ii libxtst61:1.0.2-1X11 Testing -- Resource extension workrave recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#315529: still reproducible in etch
Hi, just tested, the bug is still reproducible in etch. -Timo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433194: libc6-i386: Directory /usr/lib32 conflicts with package lib32z1
Package: libc6-i386 Version: 2.5-9 Severity: normal Installing the package fails with the following error message: Preparing to replace libc6-i386 2.5-9 (using .../libc6-i386_2.6-2_amd64.deb) ... Unpacking replacement libc6-i386 ... dpkg: error processing /var/cache/apt/archives/libc6-i386_2.6-2_amd64.deb (--unpack): trying to overwrite `/usr/lib32', which is also in package lib32z1 Errors were encountered while processing: /var/cache/apt/archives/libc6-i386_2.6-2_amd64.deb -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (989, 'unstable'), (500, 'testing-proposed-updates'), (50, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.21.4 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=en_GB, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages libc6-i386 depends on: ii libc6 2.6-2 GNU C Library: Shared libraries libc6-i386 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385864: Syntax erorr in configure reproduced
retitle 385864 Undeclared build conflict with autoconf 2.13 tag 385864 - unreproducible thanks I have just managed to reproduce this problem using autoconf 2.13 on sid. I did notice that autogen.sh generated a number of warnings as it ran, including a complaint that the acinclude command was not found. Uninstalling autoconf 2.13 meant that autoconf 2.50 was run and autogen.sh was able to complete succesfully. The package should declare a build-conflicts with autoconf2.13. autogen.sh output: Remember to add `AC_PROG_LIBTOOL' to `configure.in'. You should update your `aclocal.m4' by running aclocal. ./autogen.sh: line 27: acinclude: command not found /usr/share/aclocal/paragui.m4:12: warning: underquoted definition of AM_PATH_PARAGUI run info '(automake)Extending aclocal' or see http://sources.redhat.com/automake/automake.html#Extending-aclocal /usr/share/aclocal/gob.m4:7: warning: underquoted definition of GOB_HOOK configure.in:101: warning: AC_TRY_RUN called without default to allow cross compiling autoconf: Undefined macros: configure.in:103: AC_MSG_ERROR(Failed to determine endianness!!)) configure.in:131:AC_MSG_ERROR("SUN make does not work for building libfwbuilder. Please install GNU make") configure.in:169: AC_MSG_ERROR([POSIX threads library not present or not configured]) configure.in:177: AC_MSG_ERROR([libxml2 not present or not configured]) configure.in:196: AC_MSG_ERROR([libxslt not present or not configured]) configure.in:293:AC_MSG_ERROR([Your openssl package is too old; please upgrade to at least 0.9.6b]) configure.in:549: AC_MSG_ERROR([Could not find lwres library or link with it.]) ) configure.in:63:AC_MSG_ERROR("Could not find qmake") configure.in:70: *) AC_MSG_ERROR( "$qmake_version -- v3.x is required") ;; -- "You grabbed my hand and we fell into it, like a daydream - or a fever." signature.asc Description: Digital signature
Bug#433194: libc6-i386: Directory /usr/lib32 conflicts with package lib32z1
reassign 432844 lib32z1 forcemerge 433194 432844 thanks On Sun, Jul 15, 2007 at 12:50:31PM +0200, Marcin Goliszewski wrote: > Package: libc6-i386 > Version: 2.5-9 > Severity: normal > > > Installing the package fails with the following error message: > > Preparing to replace libc6-i386 2.5-9 (using .../libc6-i386_2.6-2_amd64.deb) > ... > Unpacking replacement libc6-i386 ... > dpkg: error processing /var/cache/apt/archives/libc6-i386_2.6-2_amd64.deb > (--unpack): > trying to overwrite `/usr/lib32', which is also in package lib32z1 > Errors were encountered while processing: > /var/cache/apt/archives/libc6-i386_2.6-2_amd64.deb > > -- System Information: > Debian Release: lenny/sid > APT prefers testing > APT policy: (990, 'testing'), (989, 'unstable'), (500, > 'testing-proposed-updates'), (50, 'experimental') > Architecture: amd64 (x86_64) > > Kernel: Linux 2.6.21.4 (SMP w/2 CPU cores; PREEMPT) > Locale: LANG=en_GB, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/bash > > Versions of packages libc6-i386 depends on: > ii libc6 2.6-2 GNU C Library: Shared libraries > > libc6-i386 recommends no packages. > > -- no debconf information > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- .''`. Aurelien Jarno | GPG: 1024D/F1BCDB73 : :' : Debian developer | Electrical Engineer `. `' [EMAIL PROTECTED] | [EMAIL PROTECTED] `-people.debian.org/~aurel32 | www.aurel32.net -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#416480: It crashes again
Hi, I'm not sure whether it's the same bug or not. But it crashes again while performing a searching. The package versions has changed since the first report: -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (1001, 'testing'), (101, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.21 Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages ghex depends on: ii gconf2 2.18.0.1-3 GNOME configuration database syste ii libart-2.0-22.3.19-3 Library of functions for 2D graphi ii libatk1.0-0 1.18.0-2 The ATK accessibility toolkit ii libbonobo2-02.18.0-2 Bonobo CORBA interfaces library ii libbonoboui2-0 2.18.0-5 The Bonobo UI library ii libc6 2.5-9GNU C Library: Shared libraries ii libcairo2 1.4.10-1+b2 The Cairo 2D vector graphics libra ii libfontconfig1 2.4.2-1.2generic font configuration library ii libgconf2-4 2.18.0.1-3 GNOME configuration database syste ii libglib2.0-02.12.12-1+b1 The GLib library of C routines ii libgnome-keyring0 0.8.1-2 GNOME keyring services library ii libgnome2-0 2.18.0-4 The GNOME 2 library - runtime file ii libgnomecanvas2-0 2.14.0-3 A powerful object-oriented display ii libgnomeprint2.2-0 2.18.0-2 The GNOME 2.2 print architecture - ii libgnomeprintui2.2-02.18.0-2 GNOME 2.2 print architecture User ii libgnomeui-02.18.1-2 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 1:2.18.1-2 GNOME Virtual File System (runtime ii libgtk2.0-0 2.10.13-1The GTK+ graphical user interface ii libgtkhex0 2.8.2-3+b1 GNOME Hex editor for files (shared ii libice6 1:1.0.3-2X11 Inter-Client Exchange library ii liborbit2 1:2.14.7-0.1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.16.4-1+b1 Layout and rendering of internatio ii libpopt01.10-3 lib for parsing cmdline parameters ii libsm6 2:1.0.3-1+b1 X11 Session Management library ii libx11-62:1.0.3-7X11 client-side library ii libxcursor1 1:1.1.8-2X cursor management library ii libxext61:1.0.3-2X11 miscellaneous extension librar ii libxfixes3 1:4.0.3-2X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.1-4X11 Input extension library ii libxinerama11:1.0.2-1X11 Xinerama extension library ii libxml2 2.6.29.dfsg-1GNOME XML library ii libxrandr2 2:1.2.1-1X11 RandR extension library ii libxrender1 1:0.9.2-1X Rendering Extension client libra ii zlib1g 1:1.2.3.3.dfsg-3 compression library - runtime ghex recommends no packages. -- debconf-show failed Now the gdb backtrace. Too many errors before the application window appears: GNU gdb 6.4.90-debian Copyright (C) 2006 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "x86_64-linux-gnu"...(no debugging symbols found) Using host libthread_db library "/lib/libthread_db.so.1". (gdb) run Starting program: /usr/bin/ghex2 BFD: /lib64/ld-linux-x86-64.so.2: don't know how to handle OS specific section `.gnu.hash' [0x6ff6] warning: Unable to grok dynamic linker /lib64/ld-linux-x86-64.so.2 as an object file warning: Unable to find dynamic linker breakpoint function. GDB will be unable to debug shared library initializers and track explicitly loaded dynamic code. BFD: /usr/lib/libSM.so.6: don't know how to handle OS specific section `.gnu.hash' [0x6ff6] Error while mapping shared library sections: "/usr/lib/libSM.so.6": not in executable format: File format not recognized. BFD: /usr/lib/libgnomevfs-2.so.0: don't know how to handle OS specific section `.gnu.hash' [0x6ff6] Error while mapping shared library sections: "/usr/lib/libgnomevfs-2.so.0": not in executable format: File format not recognized. BFD: /usr/lib/libgthread-2.0.so.0: don't know how to handle OS specific section `.gnu.hash' [0x6ff6] Error while mapping shared library sections: "/usr/lib/libgthread-2.0.so.0": not in executable format: File format not recognized. BFD: /lib/librt.so.1: don't know how to handle OS specific section `.gnu.hash' [0x6ff6] Error while mapping shared library sections: "/lib/librt.so.1": not in executable format: File format not recogni
Bug#430524: postgresql-8.2: suggested workaround works for me
Package: postgresql-8.2 Version: 8.2.4-2 Followup-For: Bug #430524 My /usr/share/postgresql/8.2/timezone directory was empty, and I was a little uneasy about making a symlink and having something erase my /usr/share/timezone directory too, so I copied the contents instead of symlinking, and they were erased on next postgresql's restart. I made a backup of /usr/share/timezone and symlink'ed the directory, and now it is fine. Thanks for the information. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.11.7 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/bash Versions of packages postgresql-8.2 depends on: ii libc62.5-9+b1GNU C Library: Shared libraries ii libcomer 1.39+1.40-WIP-2006.11.14+dfsg-2 common error description library ii libkrb53 1.6.dfsg.1-5MIT Kerberos runtime libraries ii libpam0g 0.79-4 Pluggable Authentication Modules l ii libpq5 8.2.4-2 PostgreSQL C client library ii libssl0. 0.9.8e-5SSL shared libraries ii postgres 8.2.4-2 front-end programs for PostgreSQL ii postgres 76 manager for PostgreSQL database cl ii tzdata 2007f-9 time zone and daylight-saving time postgresql-8.2 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#381145: Bug reconfirmed in 1.2.11-3
In response to the e-mail request, I temporarily removed the workaround mentioned above and re-tested ("echo hello world | lpr -p") from a Solaris box. I can confirm that the problem is still present in cupsys-bsd_1.2.11-3. Test on printers: Info HP LaserJet 4300dtnsl Location [redacted] DeviceURI socket://lj4300.horizon.com.:9100/ State Idle StateTime 1161182428 Accepting Yes Shared Yes JobSheets none none QuotaPeriod 0 PageLimit 0 KLimit 0 OpPolicy default ErrorPolicy stop-printer Info HP LaserJet 4100 Location [redacted] DeviceURI parallel:/dev/lp0 State Idle StateTime 1183633416 Accepting Yes Shared Yes JobSheets none none QuotaPeriod 0 PageLimit 0 KLimit 0 OpPolicy default ErrorPolicy stop-printer Notice the "JobSheets none none" settings. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#282235: [Debian QA] please review your old bug reports against CUPS
reassign 282235 wnpp retitle 282235 RFP: Lexmark z42_cmyk CUPS back-end thanks On 7/15/07, Alexander Sack <[EMAIL PROTECTED]> wrote: This bug most likely still persist. Last time I tried the lexmark just didn't work right out of the box ... and you had to spin your own driver. I'm afraid that "most likely" is not answering the question. However, you are referring to a third-party driver that could be packaged separately, the same way that "cups-pdf" was. I'm thus gonna reassign this to wnpp and call it an RFP. -- Martin-Éric Racine http://q-funk.iki.fi
Bug#420129: dsniff does not show any fetched data
reassign 420129 libnids1.21 thanks libnids does not trigger the tcp_callback callback for event that come from the client side. The more obvious when testing libnids sample file: http://libnids.sourceforge.net/printall.c Start printall, telnet to any opensocket and type in some stuff. only the data from the server side is repported. Cheers, -- Arnaud Cornet -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433134: [Pkg-alsa-devel] Bug#433134: asoundconf manpage doesn't explain how to use
On Sat, 14 Jul 2007 the mental interface of Philippe Cloutier told: > Package: alsa-utils > Version: 1.0.14-1 > Severity: normal > > asoundconf's manpage does not explain how asoundconf can be used. Why not? ELimar -- Alles was viel bedacht wird ist bedenklich!;-) Friedrich Nietzsche -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#431098: Blender crash with 6.5.3 version
I have the same problem with mesa 6.5.2 (https://bugs.freedesktop.org/show_bug.cgi?id=10726). So, I Installed 6.5.3 from experimental but blender crash : guessing 'blender-bin' == '/usr/bin/blender-bin' Compiled with Python version 2.4.4. Checking for installed Python... got it! /usr/bin/blender: line 46: 10592 Erreur de segmentation blender-bin "$@" -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433119: nfs-common: NFS volume no longer mounted on boot
On Sat, 14 Jul 2007 the mental interface of Steinar H. Gunderson told: > On Sat, Jul 14, 2007 at 06:17:13PM +0200, Frans Pop wrote: > > I'm not all that interested in what the right long-term fix is, I'm > > concerned about a change in nfs-common breaking something semi essential > > that has worked for ages, accidentally or not. > > I'm a bit unsure why this suddenly started going to debian-devel; I'm Cc-ing > the bug again, at least. > > > If something like that is reported, IMHO the only correct course of action > > is first to make sure that the breakage is fixed, and then to start > > talking with maintainers of other involved packages about the correct > > structural fix and migration path, and only implementing your own change > > again _after_ other packages have made the necessary modifications. > > The question here is: When initscripts is broken, and a new version of > nfs-common exposes that breakage, what is the right course of action? I'd say > it is to fix initscripts. Note that this is not a simple code change in > nfs-utils; it is a major move of functionality from one code base > (util-linux) to a different one (nfs-utils). > > Try this patch: Doesn't work in addition to nfs-common 1.1.0-9. Elimar -- Excellent day for drinking heavily. Spike the office water cooler;-) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433195: libxmlrpc-c3-dev: libxmlrpc_cpp.so file is missing or xmlrpc-c-config is generating wrong ouput for linker
Package: libxmlrpc-c3-dev Version: 0.9.10-4 Severity: normal When you try to build example from /usr/share/doc/libxmlrpc-c3-dev/examples/meerkat-app-list.cc with linker flags as described in overview.txt: CLIENT_LIBS=`xmlrpc-c-config c++ libwww-client --libs` You will get a lot of undefined symbols meerkat-app-list.cc:(.text+0x149): undefined reference to `XmlRpcValue::makeStruct()' meerkat-app-list.cc:(.text+0x15f): undefined reference to `XmlRpcValue::makeInt(int)' [...] and so on... $ xmlrpc-c-config is generating "-lxmlrpc_cpp" flag but there is no /usr/lib/libxmlrpc_cpp.so file, and that's why it probably fails. You can always build it that way: $ g++ libwww-client --libs` meerkat-app-list.o /usr/lib/libxmlrpc_cpp.a -o test So I think that xmlrpc-c-config should not put this "-lxmlrpc_cpp" in LDFLAGS or there should be appropriate *.so library provided. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages libxmlrpc-c3-dev depends on: ii libc6-dev 2.5-5 GNU C Library: Development Librari ii libwww-dev5.4.0-11 The W3C WWW library - development ii libxmlrpc-c3 0.9.10-4 A lightweight RPC library based on libxmlrpc-c3-dev recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433196: Typo of libcurl3-gnutsl-dev in Build-Depends
Package: git-core Version: 1:1.5.2.4-1 Severity: minor When building git-core 1:1.5.2.4-1 for ubuntu feisty I saw that the Build-Depends on libcurl3-gnutls-dev is misspelled as gnutsl. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433197: pysycache: undefined symbol: mouse_seteventhandler
Package: pysycache Version: 3.0.1-1 Severity: grave Justification: renders package unusable Traceback (most recent call last): File "pysycache.py", line 38, in ? import pygame File "/usr/lib/python2.4/site-packages/pygame/__init__.py", line 75, in ? from pygame.base import * ImportError: /usr/lib/libSDL-1.2.so.0: undefined symbol: mouse_seteventhandler -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'oldstable'), (99, 'unstable'), (9, 'experimental'), (1, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.22-rc6-mn (SMP w/2 CPU cores; PREEMPT) Locale: LANG=uk_UA.UTF-8, LC_CTYPE=uk_UA.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages pysycache depends on: ii pysycache-buttons-beera 3.0.1-1 Bee-rabbit images for buttons acti ii pysycache-buttons-crapa 3.0.1-1 Crapaud images for buttons activit ii pysycache-buttons-ice 3.0.1-1 Ice images for buttons activities ii pysycache-buttons-wolf 3.0.1-1 Wolf images for buttons activities ii pysycache-click-dinosau 3.0.1-1 Dinosaurs images for click activit ii pysycache-click-sea 3.0.1-1 Sea images for click activities fo ii pysycache-dblclick-appl 3.0.1-1 Apple and pear images for double c ii pysycache-dblclick-butt 3.0.1-1 Butterfly images for double click ii pysycache-i18n 3.0.1-1 Translations for PySyCache ii pysycache-images3.0.1-1 Images for PySyCache ii pysycache-puzzle-cartoo 3.0.1-1 Cartoons images for puzzle activit ii pysycache-puzzle-photos 3.0.1-1 Photos for puzzle activities for P ii pysycache-sounds3.0.1-1 A collection of sounds to be used ii python 2.4.4-6 An interactive high-level object-o ii python-pygame 1.7.1release-4.1 SDL bindings for games development ii python-support 0.7.1automated rebuilding support for p ii ttf-bitstream-vera 1.10-7 The Bitstream Vera family of free pysycache recommends no packages. -- debconf-show failed -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#373720: kdeprint can't connect to cups server through socket seems to be fixed
Hi! I configured KDEPrint to use /var/run/cups/cups.sock:631 again and printed some images. Seems to work nicely. So apparently this bug is fixed. I am using: shambala:~> echo "kdeprint cupsys cupsys-client libcupsys2 hpijs" | xargs -n1 apt-show-versions kdeprint/sid uptodate 4:3.5.7-2 cupsys/sid upgradeable from 1.2.7-4 to 1.2.11-3 cupsys-client/sid upgradeable from 1.2.7-4 to 1.2.11-3 libcupsys2/sid upgradeable from 1.2.7-4 to 1.2.11-3 hpijs/sid upgradeable from 2.6.10+1.6.10-3 to 2.6.10+1.6.10-4.1 Hmmm... seems there are some updates available. Okay, I upgraded to shambala:~> echo "kdeprint cupsys cupsys-client libcupsys2 hpijs hpijs-ppds" | xargs -n1 apt-show-versions kdeprint/sid uptodate 4:3.5.7-2 cupsys/sid uptodate 1.2.11-3 cupsys-client/sid uptodate 1.2.11-3 libcupsys2/sid uptodate 1.2.11-3 hpijs/sid uptodate 2.6.10+1.6.10-4.1 hpijs-ppds/sid uptodate 2.6.10+1.6.10-4.1 and printed another image. Still works fine. Thus I am closing my bug report. I did not use notfound tag, since actually I do not know whether it is a new kdeprint or a new cups that fixes the bug. Regards, -- Martin 'Helios' Steigerwald - http://www.Lichtvoll.de GPG: 03B0 0D6C 0040 0710 4AFA B82F 991B EAAC A599 84C7 signature.asc Description: This is a digitally signed message part.
Bug#381699: ; CUPS 1.2.7-4
CUPS version 1.2.7-4 has not fixed, or improved, the problem described in Bug#381699. Printing a test page with my hp PSC2210 results in many sheets ejected from the printer, each with a small portion of the test page printed on each sheet. While this is happening, the browser continually reloads the localhost:631 view. Other than being unable to print a CUPS test page, the printer works well. Richard -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#370686: fwbuilder: Fix build with GCC 4.2
tag 370686 + patch The attached patch fixes compilation of fwbuilder with GCC 4.2 when dropped in to debian/patches. If it would be helpful I can prepare a NMU fixing both this and 385864? Thanks. -- "You grabbed my hand and we fell into it, like a daydream - or a fever." This patch fixes a couple of issues with GCC 4.2 due to it being a bit more strict about requiring proper declarations. diff -urN libfwbuilder-2.1.8.orig/src/fwbuilder/dns.cpp libfwbuilder-2.1.8/src/fwbuilder/dns.cpp --- libfwbuilder-2.1.8.orig/src/fwbuilder/dns.cpp 2007-07-15 12:07:58.0 +0100 +++ libfwbuilder-2.1.8/src/fwbuilder/dns.cpp2007-07-15 12:13:38.0 +0100 @@ -814,7 +814,7 @@ pthread_attr_destroy(&tattr); } -void* libfwbuilder::DNS_bulkBackResolve_Thread(void *args) +void* DNS_bulkBackResolve_query::DNS_bulkBackResolve_Thread(void *args) { std::ostringstream str; void **void_pair=(void**)args; diff -urN libfwbuilder-2.1.8.orig/src/fwbuilder/dns.h libfwbuilder-2.1.8/src/fwbuilder/dns.h --- libfwbuilder-2.1.8.orig/src/fwbuilder/dns.h 2007-07-15 12:07:58.0 +0100 +++ libfwbuilder-2.1.8/src/fwbuilder/dns.h 2007-07-15 12:14:38.0 +0100 @@ -223,6 +223,8 @@ private: +static void* DNS_bulkBackResolve_Thread(void *args); + Mutex running_mutex ; Cond running_cond ; unsigned int running_count ; Binary files libfwbuilder-2.1.8.orig/src/fwbuilder/.dns.h.swp and libfwbuilder-2.1.8/src/fwbuilder/.dns.h.swp differ Binary files libfwbuilder-2.1.8.orig/src/fwbuilder/.IPAddress.cpp.swp and libfwbuilder-2.1.8/src/fwbuilder/.IPAddress.cpp.swp differ diff -urN libfwbuilder-2.1.8.orig/src/fwbuilder/IPAddress.h libfwbuilder-2.1.8/src/fwbuilder/IPAddress.h --- libfwbuilder-2.1.8.orig/src/fwbuilder/IPAddress.h 2007-07-15 12:07:58.0 +0100 +++ libfwbuilder-2.1.8/src/fwbuilder/IPAddress.h2007-07-15 12:18:29.0 +0100 @@ -144,6 +144,7 @@ friend bool operator==(const Netmask &a, const Netmask &b); }; +Netmask operator~(const Netmask &nm); class IPNetwork; std::vector getOverlap(const IPNetwork &n1,const IPNetwork &n2); signature.asc Description: Digital signature
Bug#433198: k3b: K3b wont add mp3 to audi cd
Package: k3b Version: 1.0.2-1 Severity: important I cant get K3b to add mp3 tracks to audio cd project comes up with the error below. Unable to handle the following files due to an unsupported format: You may manually convert these audio files to wave using another application supporting the audio format and then add the wave files to the K3b project. /home/ben/Harry Potter Audio Books/Harry Potter and the Half-Blood Prince/Chapter 02 - A Spinners End.mp3 -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.21-2-686 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages k3b depends on: ii cdparanoia 3.10+debian~pre0-5 audio extraction tool for sampling ii cdrdao 1:1.2.2-6 records CDs in Disk-At-Once (DAO) ii genisoimage 9:1.1.6-1 Creates ISO-9660 CD-ROM filesystem ii kdebase-bin 4:3.5.7-2 core binaries for the KDE base mod ii kdelibs-data 4:3.5.7.dfsg.1-1core shared data for all KDE appli ii kdelibs4c2a 4:3.5.7.dfsg.1-1core libraries and binaries for al ii libacl1 2.2.42-1Access control list shared library ii libart-2.0-2 2.3.19-3Library of functions for 2D graphi ii libattr1 1:2.4.32-1.1Extended attribute shared library ii libaudio21.9-2+b1The Network Audio System (NAS). (s ii libc62.6-2 GNU C Library: Shared libraries ii libdbus-1-3 1.1.1-3 simple interprocess messaging syst ii libdbus-qt-1-1c2 0.62.git.20060814-2 simple interprocess messaging syst ii libdvdread3 0.9.7-3 library for reading DVDs ii libexpat11.95.8-3.4 XML parsing C library - runtime li ii libfontconfig1 2.4.2-1.2 generic font configuration library ii libfreetype6 2.3.5-1+b1 FreeType 2 font engine, shared lib ii libgamin0 [libfam0] 0.1.8-2 Client library for the gamin file ii libgcc1 1:4.2-20070712-1GCC support library ii libhal1 0.5.9.1-2 Hardware Abstraction Layer - share ii libice6 1:1.0.3-2 X11 Inter-Client Exchange library ii libidn11 0.6.5-1 GNU libidn library, implementation ii libjpeg626b-13 The Independent JPEG Group's JPEG ii libk3b3 1.0.2-1 The KDE cd burning application lib ii libmusicbrainz4c2a 2.1.5-1 Second generation incarnation of t ii libpng12-0 1.2.15~beta5-2 PNG library - runtime ii libqt3-mt3:3.3.7-5 Qt GUI Library (Threaded runtime v ii libsm6 2:1.0.3-1+b1X11 Session Management library ii libstdc++6 4.2-20070712-1 The GNU Standard C++ Library v3 ii libx11-6 2:1.0.3-7 X11 client-side library ii libxcursor1 1:1.1.8-2 X cursor management library ii libxext6 1:1.0.3-2 X11 miscellaneous extension librar ii libxft2 2.1.12-2FreeType-based font drawing librar ii libxi6 2:1.1.1-1 X11 Input extension library ii libxinerama1 1:1.0.2-1 X11 Xinerama extension library ii libxrandr2 2:1.2.1-1 X11 RandR extension library ii libxrender1 1:0.9.2-1 X Rendering Extension client libra ii libxt6 1:1.0.5-3 X11 toolkit intrinsics library ii wodim9:1.1.6-1 command line CD/DVD writing tool ii zlib1g 1:1.2.3.3.dfsg-5compression library - runtime Versions of packages k3b recommends: ii dvd+rw-tools 7.0-7 DVD+-RW/R tools ii kcontrol 4:3.5.7-2 control center for KDE ii kdebase-kio-plugins 4:3.5.7-2 core I/O slaves for KDE ii vcdimager 0.7.23-3 A VideoCD (VCD) image mastering an -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433119: nfs-common: NFS volume no longer mounted on boot
On Sun, Jul 15, 2007 at 01:28:32PM +0200, Elimar Riesebieter wrote: > Doesn't work in addition to nfs-common 1.1.0-9. What does your fstab look like? What messages do you get during boot? (I'm taking this off debian-devel from here on; it doesn't make sense to keep debugging there.) /* Steinar */ -- Homepage: http://www.sesse.net/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#382936: is it still a problem
Not sure as I dont use my current debian system for printing. -- Regards Martin West -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#425944: "cupsdCallPamAuthHelper" is a Debian bug!
Roger Leigh wrote: > Kurt Pfeifle <[EMAIL PROTECTED]> writes: > >> @Debian's CUPS-Patchers: What about properly closing the pipes again >> your (seetuid root!) helper utility opened? >> >> I'm still failing to see where the printing and CUPS-related wisdom of >> the Debian packagers is superior to the one living in the brains of the >> CUPS upstream developers. > > While I can't comment upon the quality of the patch in question, PAM > is used for systemwide authentication and authorisation for all > services on Debian systems, and this must include CUPS. I don't question the use of PAM. This is all about 'cupsdCallPamAuthHelper'. Which is not part of CUPS proper, but an invention of Debian packaging in order to make up for lost features and usability. These were lost by making CUPS on Debian run as non-root (essentially forking CUPS for no good reason). BTW, CUPS proper *does* work with PAM already... -- Kurt Pfeifle System & Network Printing Consultant Linux/Unix/Windows/Samba/CUPS Infotec Deutschland GmbH . Hedelfinger Strasse 58 A RICOH Company ... D-70327 Stuttgart/Germany -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433199: hangs after logout using preauth tunnel and maxconnections>1
Package: offlineimap Version: 5.99.1 Severity: normal When using maxconnections = 2 on an account, offlineimap hangs after logging out on its second and any further invocations: --8<-- imap(elho): Info: Disconnected: Logged out Main program terminated with exception: Traceback (most recent call last): File "/var/lib/python-support/python2.4/offlineimap/init.py", line 169, in startup threadutil.exitnotifymonitorloop(threadutil.threadexited) File "/var/lib/python-support/python2.4/offlineimap/threadutil.py", line 118, in exitnotifymonitorloop exitcondition.wait(1) File "threading.py", line 222, in wait _sleep(delay) KeyboardInterrupt --8<-- Without maxconnections set, ie. the default of 1, offlineimap runs fine and the problem is kind of "reset" - the first run with maxconnections = 2 after this runs fine again. When trying maxconnections = 3 it already hung on its first invocation (and the ones after) and took 2 SIGINTs to kill it. When trying that another time now to verify, it hung on its first invocation but not afterwards. Further testing shows that it also sometimes works with maxconnections = 2, though rarely. I'm using ssh preauthtunnel on all accounts, not sure whether that matters. elmar -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.21 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages offlineimap depends on: ii python2.4.4-6An interactive high-level object-o ii python-support0.6.4 automated rebuilding support for p offlineimap recommends no packages. -- no debconf information -- .'"`./"\ | :' : Elmar Hoffmann <[EMAIL PROTECTED]>ASCII Ribbon Campaign \ / `. `'GPG key available via pgp.netagainst HTML email X `-& vCards / \ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433200: [l10n] exim4 italian translation update for debconf templates
Package: exim4 Severity: wishlist Version: 4.67-7 Hi exim4 maintainers, please find attached an update Italian translation for you debconf templates. Bye, Giuseppe # Italian messages for exim4 (debconf templates). # Copyright © 2004 Software in the Public Interest, Inc. # Danilo Piazzalunga <[EMAIL PROTECTED]>, 2004. # msgid "" msgstr "" "Project-Id-Version: exim4 4.63-7\n" "Report-Msgid-Bugs-To: [EMAIL PROTECTED]" "POT-Creation-Date: 2007-06-12 08:53+0200\n" "PO-Revision-Date: 2007-07-15 13:47+0200\n" "Last-Translator: Giuseppe Sacco <[EMAIL PROTECTED]>\n" "Language-Team: Italian <[EMAIL PROTECTED]>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: KBabel 1.3.1\n" #. Type: boolean #. Description #: ../exim4-base.templates:1001 msgid "Remove undelivered messages in spool directory?" msgstr "Cancellare i messaggi non consegnati dalla directory di «spool»?" #. Type: boolean #. Description #: ../exim4-base.templates:1001 msgid "" "There are e-mail messages in the Exim spool directory /var/spool/exim4/" "input/ which have not yet been delivered. Removing Exim will cause them to " "remain undelivered until Exim is re-installed." msgstr "Ci sono dei messaggi nella directory di «spool» di Exim, /var/spool/exim4/input, che non sono stati ancora consegnati. Rimuovendo Exim i messaggi verranno mantenuti lì sinché Exim non verrà reinstallato." #. Type: boolean #. Description #: ../exim4-base.templates:1001 msgid "" "If this option is not chosen, the spool directory is kept, allowing the " "messages in the queue to be delivered at a later date after Exim is re-" "installed." msgstr "" "Se questa opzione non è selezionata, la directory di «spool» viene " "conservata in modo che i messaggi possano essere consegnati in futuro, dopo " "una nuova installazione di Exim." #. Type: error #. Description #: ../exim4-base.templates:2001 ../exim4-daemon-heavy.templates:1001 #: ../exim4-daemon-light.templates:1001 ../exim4.templates:1001 msgid "Reconfigure exim4-config instead of this package" msgstr "Riconfigurare exim4-config anziché questo pacchetto" #. Type: error #. Description #: ../exim4-base.templates:2001 ../exim4-daemon-heavy.templates:1001 #: ../exim4-daemon-light.templates:1001 ../exim4.templates:1001 msgid "" "Exim4 has its configuration factored out into a dedicated package, exim4-" "config. To reconfigure Exim4, use 'dpkg-reconfigure exim4-config'." msgstr "" "Exim4 ha la sua configurazione in un pacchetto dedicato, exim4-config. Per " "riconfigurare Exim4 usare «dpkg-reconfigure exim4-config»." #. Type: select #. Choices #. Translators beware! the following six strings form a single #. Choices menu. - Every one of these strings has to fit in a standard #. 80 characters console, as the fancy screen setup takes up some space #. try to keep below ~71 characters. #. DO NOT USE commas (,) in Choices translations otherwise #. this will break the choices shown to users #: ../exim4-config.templates:1001 msgid "internet site; mail is sent and received directly using SMTP" msgstr "sito internet; posta inviata e ricevuta direttamente con SMTP" #. Type: select #. Choices #. Translators beware! the following six strings form a single #. Choices menu. - Every one of these strings has to fit in a standard #. 80 characters console, as the fancy screen setup takes up some space #. try to keep below ~71 characters. #. DO NOT USE commas (,) in Choices translations otherwise #. this will break the choices shown to users #: ../exim4-config.templates:1001 msgid "mail sent by smarthost; received via SMTP or fetchmail" msgstr "posta inviata tramite uno «smarthost»; ricevuta via SMTP o fetchmail" #. Type: select #. Choices #. Translators beware! the following six strings form a single #. Choices menu. - Every one of these strings has to fit in a standard #. 80 characters console, as the fancy screen setup takes up some space #. try to keep below ~71 characters. #. DO NOT USE commas (,) in Choices translations otherwise #. this will break the choices shown to users #: ../exim4-config.templates:1001 msgid "mail sent by smarthost; no local mail" msgstr "posta inviata tramite uno «smarthost»; niente posta locale" #. Type: select #. Choices #. Translators beware! the following six strings form a single #. Choices menu. - Every one of these strings has to fit in a standard #. 80 characters console, as the fancy screen setup takes up some space #. try to keep below ~71 characters. #. DO NOT USE commas (,) in Choices translations otherwise #. this will break the choices shown to users #: ../exim4-config.templates:1001 msgid "local delivery only; not on a network" msgstr "solo consegna locale; non in rete" #. Type: select #. Choices #. Translators beware! the following six strings form a single #. Choices menu. - Every one of these strings has to fit in a standard #. 80 characters console, as the fancy screen setup takes
Bug#367479: [Debian QA] please review your old bug reports against CUPS
On 7/15/07, Roger Leigh <[EMAIL PROTECTED]> wrote: "\"Martin-Éric" Racine" <[EMAIL PROTECTED]> writes: > Please review your bug report and inform us whether it still applies > to version 1.2.7-4, as present in Debian release 4.0 (Etch), or to > newer releases present in the testing branch. For 1.2.12-1: % id uid=1000(rleigh) gid=1000(rleigh) groups=...,106(lpadmin),... % cupsenable epl-6200 D [15/Jul/2007:12:37:30 +0100] cupsdAcceptClient: 7 from localhost:631 (IPv4) D [15/Jul/2007:12:37:30 +0100] cupsdReadClient: 7 POST /admin/ HTTP/1.1 D [15/Jul/2007:12:37:30 +0100] cupsdAuthorize: No authentication data provided. D [15/Jul/2007:12:37:30 +0100] Resume-Printer ipp://localhost/printers/epl-6200 E [15/Jul/2007:12:37:30 +0100] Resume-Printer: Unauthorized D [15/Jul/2007:12:37:30 +0100] cupsdSendError: 7 code=401 (Unauthorized) D [15/Jul/2007:12:37:30 +0100] cupsdCloseClient: 7 D [15/Jul/2007:12:37:30 +0100] cupsdAcceptClient: 7 from localhost:631 (IPv4) D [15/Jul/2007:12:37:30 +0100] cupsdReadClient: 7 POST /admin/ HTTP/1.1 D [15/Jul/2007:12:37:30 +0100] cupsdAuthorize: username="root" D [15/Jul/2007:12:37:30 +0100] Resume-Printer ipp://localhost/printers/epl-6200 I [15/Jul/2007:12:37:30 +0100] Printer "epl-6200" started by "root". D [15/Jul/2007:12:37:30 +0100] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok) D [15/Jul/2007:12:37:30 +0100] cupsdCloseClient: 7 % cupsdisable epl-6200 D [15/Jul/2007:12:37:46 +0100] cupsdAcceptClient: 7 from localhost:631 (IPv4) D [15/Jul/2007:12:37:46 +0100] cupsdReadClient: 7 POST /admin/ HTTP/1.1 D [15/Jul/2007:12:37:46 +0100] cupsdAuthorize: No authentication data provided. D [15/Jul/2007:12:37:46 +0100] Pause-Printer ipp://localhost/printers/epl-6200 E [15/Jul/2007:12:37:46 +0100] Pause-Printer: Unauthorized D [15/Jul/2007:12:37:46 +0100] cupsdSendError: 7 code=401 (Unauthorized) D [15/Jul/2007:12:37:46 +0100] cupsdCloseClient: 7 D [15/Jul/2007:12:37:46 +0100] cupsdAcceptClient: 7 from localhost:631 (IPv4) D [15/Jul/2007:12:37:46 +0100] cupsdReadClient: 7 POST /admin/ HTTP/1.1 D [15/Jul/2007:12:37:46 +0100] cupsdAuthorize: username="root" D [15/Jul/2007:12:37:46 +0100] Pause-Printer ipp://localhost/printers/epl-6200 D [15/Jul/2007:12:37:46 +0100] Discarding unused printer-state-changed event... I [15/Jul/2007:12:37:46 +0100] Saving printers.conf... I [15/Jul/2007:12:37:46 +0100] Printer "epl-6200" stopped by "root". D [15/Jul/2007:12:37:46 +0100] cupsdProcessIPPRequest: 7 status_code=0 (successful-ok) D [15/Jul/2007:12:37:46 +0100] cupsdCloseClient: 7 I still get the Pause-Printer errors, but it then continues to stop the printer (apparently as root, even though I ran it as user "rleigh". So, while it "works", I'm not certain if this is working as it should. Thanks for testing this, Roger. I have tagged it as also occurring in 1.2.7 and 1.2.12. -- Martin-Éric Racine http://q-funk.iki.fi
Bug#433202: Cpufrequtils conflicts with cpufreqd?
Package: cpufrequtils Version: 002-5 Since cpufrequtils seems to be a subset of cpufreqd, and of each of them main function's is to set the cpufreq governor that a cpu have to use (and its options), shouldn't they conflict with each other? As now the package's description is not very clear on what the package do (i'll fill a bug for this), so it is easy to have a machine with both cpufreqd and cpufrequtils installed at the same time (as i did). Nothing bad happened, but i think this could create a somewhat confusing configuration and some unexpected behaviours (what is the cpufreq configuration that prevail?). Regards. Cesare. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#385521: langdrill: Remove use of minimum/maximum operator
tag 385521 + patch thanks The enclosed patch removes the use of the obsolete minimum operator, allowing langdrill to build with GCC 4.2. -- "You grabbed my hand and we fell into it, like a daydream - or a fever." The minimum and maximum operators were never terribly portable and have been dropped by GCC 4.2. Index: langdrill-0.3/src/main.cc === --- langdrill-0.3.orig/src/main.cc 2007-07-15 12:52:38.0 +0100 +++ langdrill-0.3/src/main.cc 2007-07-15 12:54:01.0 +0100 @@ -460,9 +460,11 @@ // keys. In such a case, we must take some precations setActiveButtons( keyTotalNr ); - // is this minimum operator portable ?? - // it should work with egcs at least !! - int cols = keyTotalNr signature.asc Description: Digital signature
Bug#433201: mod-mono: [INTL:de] Updated german debconf translation
Package: mod-mono Severity: wishlist Tags: patch l10n Please find attached an updated german translation of mod-mono debconf messages, courtesy of Helge Kreutzmann. Thanks, Alwin Meschede -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.20-audrid2 (PREEMPT) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash # German translation of mod-mono templates # Alwin Meschede <[EMAIL PROTECTED]>, 2006. # Helge Kreutzmann <[EMAIL PROTECTED]>, 2007. # This file is distributed under the same license as the mod-mono package. # msgid "" msgstr "" "Project-Id-Version: mod-mono 1.2.4-1\n" "Report-Msgid-Bugs-To: [EMAIL PROTECTED]" "POT-Creation-Date: 2007-06-22 18:32+0200\n" "PO-Revision-Date: 2007-07-10 19:00+0200\n" "Last-Translator: Helge Kreutzmann <[EMAIL PROTECTED]>\n" "Language-Team: german <[EMAIL PROTECTED]>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 1.11.4\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #. Type: select #. Description #: ../libapache2-mod-mono.templates:1001 msgid "Use mono-server:" msgstr "Verwende Mono-Server:" #. Type: select #. Description #: ../libapache2-mod-mono.templates:1001 msgid "" "This module, libapache2-mod-mono, can be used with one of two different Mono " "ASP.NET backends. `mod-mono-server' implements ASP.NET 1.1 while `mod-mono-" "server2' implementes ASP.NET 2.0 features." msgstr "" "Dieses Modul (libapache2-mod-mono) kann mit einem von zwei verschiedenen " "Mono-ASP.Net-Backends verwendet werden. »mod-mono-server« implementiert " "ASP.NET 1.1, während »mod-mono-server2« ASP.NET 2.0-Funktionen implementiert." #~ msgid "Activate module?" #~ msgstr "Modul aktivieren?" #~ msgid "If this is true, then the module will be activated as apache starts." #~ msgstr "" #~ "Falls Sie hier zustimmen, wird das Modul aktiviert wenn Apache gestartet " #~ "wird."
Bug#433119: nfs-common: NFS volume no longer mounted on boot
On Sun, 15 Jul 2007 the mental interface of Steinar H. Gunderson told: > On Sun, Jul 15, 2007 at 01:28:32PM +0200, Elimar Riesebieter wrote: > > Doesn't work in addition to nfs-common 1.1.0-9. > > What does your fstab look like? What messages do you get during boot? fstab: baumbart:/exp/archiv /archiv nfs rw,nfsvers=3,rsize=32768,wsize=32768,timeo=14,hard,intr 0 0 bootmsg: rpc.statd is not running but is required for remote locking Either use "-o nolocks" to keep locks local, or start statd. --- mountnfs.orig 2007-07-13 12:01:18.0 +0200 +++ mountnfs2007-07-15 13:38:21.0 +0200 @@ -109,7 +109,7 @@ # rpc.idmapd, and loads the right kernel modules if # applicable) if we use Kerberos and/or NFSv4 mounts. # - if [ "$gss_or_idmap" = yes ] && [ -x /etc/init.d/nfs-common ] + if [ -x /etc/init.d/nfs-common ] then /etc/init.d/nfs-common start fi works. Elimar -- Numeric stability is probably not all that important when you're guessing;-) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433119: nfs-common: NFS volume no longer mounted on boot
On Sun, Jul 15, 2007 at 02:06:21PM +0200, Elimar Riesebieter wrote: > rpc.statd is not running but is required for remote locking > Either use "-o nolocks" to keep locks local, or start statd. > > --- mountnfs.orig 2007-07-13 12:01:18.0 +0200 > +++ mountnfs2007-07-15 13:38:21.0 +0200 > @@ -109,7 +109,7 @@ > # rpc.idmapd, and loads the right kernel modules if > # applicable) if we use Kerberos and/or NFSv4 mounts. > # > - if [ "$gss_or_idmap" = yes ] && [ -x /etc/init.d/nfs-common ] > + if [ -x /etc/init.d/nfs-common ] > then > /etc/init.d/nfs-common start > fi > > works. Well, we can't start it unconditionally. With my patch applied, could you please add an "echo $start_nfs" before the if, and report the output? I'm wondering if nfs-common refuses to start due to portmap, or if something else is going on. /* Steinar */ -- Homepage: http://www.sesse.net/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#382936: [Pkg-cups-devel] Bug#382936: is it still a problem
On 7/15/07, Martin West <[EMAIL PROTECTED]> wrote: Not sure as I dont use my current debian system for printing. Pascal, what about you guys on Ubuntu side? Is this fixed? -- Martin-Éric Racine http://q-funk.iki.fi
Bug#430725: ITP: webboard -- Copy and paste to a public pastebin server
tag 430725 wontfix thanks I tag it wontfix, as there seems to be no development anymore upstream. As soon as this changes, I will remove this tag. signature.asc Description: Dies ist ein digital signierter Nachrichtenteil
Bug#433181: openssh: Manpages are outdated
> Are you sure this isn't simply that the datestamps on the man pages > haven't been updated? In fact, no, I'm not sure... For example Debian's man page of ssh must be newer than 1999 because it seems there are references to 2006 year in "See also" section. But for sshd man page: Section AUTHENTIFICATION, end of the third paragraph: OpenSSH's web site: >a crypto-graphic message authentication code (hmac-md5, hmac-sha1, >umac-64 or hmac-ripemd160). Debian's man page: >a crypto‐graphic message authentication code (hmac-sha1 or hmac-md5). There are also other small differences.
Bug#432911: aptitude: localized package descriptions have problems, with character sets
Hi Jiří, hi Daniel, I had the same problem: the localized package descriptions had question marks instead of German umlauts in a non-UTF-8 terminal. It seems I've found the culprit: there is a line with export MM_CHARSET=ISO-8859-1 in my .bashrc, put in by language-env years ago. After unsetting MM_CHARSET aptitude displayed the national characters just fine. Hope this helps, Sven
Bug#433166: totem-xine: totem stopped working after recent upgrade: no codec is known anymore
On Sun, Jul 15, 2007 at 10:47:14AM +0200, Loïc Minier wrote: > What if you install libxine1-ffmpeg? Yup, that fixes things again. Had to be something simple, I guess it's a missing dependency - and probably not even of totem but of xine? Thanks -- Carlo Wood <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433203: Cpufrequtils package description
Package: cpufrequtils Version: 002-5 Reading from the description of the package seems that it only install two utilities that one has to invoke manually to make something. But this package is a lot more "active" than this: in fact it starts the ondemand cpufreq governor and creates an init scripts to start it on every boot. I think the description should be more clearer on the package behaviour. Here is a proposal: -- This package provide an interface to set and configure a cpufreq governor on every boot. It is based on two utilities that can be used standalone to set and monitor ther cpufreq state. You need a CPUFreq driver loaded and a cpu that support some frequency throttling mechanism like SpeedStep (Intel) or PowerNow (AMD). -- Regards. Cesare. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433202: Cpufrequtils conflicts with cpufreqd?
On Sun, Jul 15, 2007 at 02:03:46PM +0200, Cesare Leonardi wrote: > Package: cpufrequtils > Version: 002-5 > > Since cpufrequtils seems to be a subset of cpufreqd, and of each of them > main function's is to set the cpufreq governor that a cpu have to use (and > its options), shouldn't they conflict with each other? no, cpufreqd does it dynamically, cpufrequtils statically and also includes an utility to inspect the current state (cpufreq-info). > As now the package's description is not very clear on what the package do what's not clear about that? > (i'll fill a bug for this), so it is easy to have a machine with both > cpufreqd and cpufrequtils installed at the same time (as i did). Nothing > bad happened, but i think this could create a somewhat confusing > configuration and some unexpected behaviours (what is the cpufreq > configuration that prevail?). the last one set (probably cpufreqd will prevail sooner or later as it changes the limits/governor based on system stats) It doesn't make sense to conflict with cpufreqd. As I see it these are complementary tools and one may well have one of them or both (as I have). cheers -- mattia :wq! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#374956: gs-esp problem
Hi there, please merge #374956 and #298249 from Cupsys into #431793 from gs-esp since the Cupsys team was the only team that looked into the problem as of yet and Kenshi Muto from Cupsys wrote in #298249 that the problem is most likely caused by gs-esp (which is also my understanding of that problem). If you can't merge them than they can be archieved since Cupsys is most likely not the culprit. Thx, Malte -- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#433198: k3b: K3b wont add mp3 to audi cd
On 2007-07-15 at 12:48:56, Ben Whyte wrote: > Unable to handle the following files due to an unsupported format: > You may manually convert these audio files to wave using another > application supporting the audio format and then add the wave files to > the K3b project. > /home/ben/Harry Potter Audio Books/Harry Potter and the Half-Blood > Prince/Chapter 02 - A Spinners End.mp3 Do you get this error message when you add the file to the project or when you start burning the CD ? Francois -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#432911: aptitude: localized package descriptions have problems, with character sets
Am 15.07.2007 14:23 schrieb Sven Joachim: > I had the same problem: the localized package descriptions had question > marks instead of German umlauts in a non-UTF-8 terminal. It seems I've > found the culprit: there is a line with > > export MM_CHARSET=ISO-8859-1 > > in my .bashrc, put in by language-env years ago. After unsetting > MM_CHARSET aptitude displayed the national characters just fine. Ouuch, no it didn't. I really should have made sure that I had started aptitude in the right terminal. :-( I can just confirm Jiří's observations: the localized package descriptions work fine in an UTF-8 terminal, but not in others. Sorry for the noise, Sven
Bug#388813: stardict: Fix build with GCC 4.2
tag 388813 + patch thanks The enclosed patch fixes the build of stardict with GCC 4.2 (the compiler is now more strict about enforcing visibility requirements for static member functions). If desired I can prepare a NMU with this fix in it? Thanks. -- "You grabbed my hand and we fell into it, like a daydream - or a fever." --- stardict-2.4.8.orig/src/mainwin.h 2006-06-30 06:29:34.0 +0100 +++ stardict-2.4.8/src/mainwin.h2007-07-15 13:25:18.0 +0100 @@ -13,6 +13,8 @@ const int MIN_WINDOW_WIDTH=200; const int MIN_WINDOW_HEIGHT=100; +class AppCore; + enum TextWinQueryResult { TEXT_WIN_FOUND, @@ -68,10 +70,13 @@ static void on_main_menu_about_activate(GtkMenuItem *menuitem, TopWin *oTopWin); static void on_main_menu_quit_activate(GtkMenuItem *menuitem, TopWin *oTopWin); - static void ClipboardReceivedCallback(GtkClipboard *clipboard, const gchar *text, gpointer data); - void LoadHistory(void); void SaveHistory(void); + +protected: + friend class AppCore; + static void ClipboardReceivedCallback(GtkClipboard *clipboard, const gchar *text, gpointer data); + public: GtkWidget* WordCombo; GtkWidget* MainMenu; signature.asc Description: Digital signature
Bug#399928: Seems to be fixed
On Sun, Jul 15, 2007 at 01:10:26PM +0300, Martin-Ã?ric Racine wrote: > Please review your bug report and inform us whether it still applies > to version 1.2.7-4, as present in Debian release 4.0 (Etch), or to > newer releases present in the testing branch. I'm now using 1.2.11-3 from testing, and the model selection seems to be okay now. -- Email: Daniel Dawson <[EMAIL PROTECTED]> del.icio.us: danieldawson Web: http://www.icehouse.net/ddawson/ GnuPG public key: see web site Yahoo! IM: danielcdawson ifMUD: DanDawson
Bug#425944: [Pkg-cups-devel] Bug#425944: "cupsdCallPamAuthHelper" is a Debian bug!
At Sun, 15 Jul 2007 13:52:04 +0200, Kurt Pfeifle wrote: > Roger Leigh wrote: > > Kurt Pfeifle <[EMAIL PROTECTED]> writes: > >> @Debian's CUPS-Patchers: What about properly closing the pipes again > >> your (seetuid root!) helper utility opened? > >> > >> I'm still failing to see where the printing and CUPS-related wisdom of > >> the Debian packagers is superior to the one living in the brains of the > >> CUPS upstream developers. > > > > While I can't comment upon the quality of the patch in question, PAM > > is used for systemwide authentication and authorisation for all > > services on Debian systems, and this must include CUPS. > > I don't question the use of PAM. > > This is all about 'cupsdCallPamAuthHelper'. Which is not part of CUPS > proper, but an invention of Debian packaging in order to make up for > lost features and usability. These were lost by making CUPS on Debian > run as non-root (essentially forking CUPS for no good reason). FYI, I disabled cupsdCallPamAuthHelper call in Debian cupsys 1.2.12-1 (and closed this bug), because Debian CUPS decided to use root privilege again unlike Ubuntu. Thanks, -- Kenshi Muto [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#429004: prismstumbler: FTBFS: /usr/include/linux/wireless.h:886: error: 'IFNAMSIZ' undeclared here (not in a function)
Lucas Nussbaum <[EMAIL PROTECTED]> (15/06/2007): > In file included from iface-wlan-14.c:33: > /usr/include/linux/wireless.h:886: error: 'IFNAMSIZ' undeclared here (not in > a function) Hi, doesn't this look like a bug in linux-libc-dev/linux-kernel-headers? Adding an #include on "" before the one on "" enables to go further in the build, but it still fails, with: | In file included from cards.c:12: | /usr/include/linux/wireless.h:650: error: expected specifier-qualifier-list before '__s32' | [many occurrences] | cards.c: In function 'find_wireless_cards': | cards.c:71: error: 'struct iwreq' has no member named 'ifr_name' | make: *** [cards.o] Error 1 Cheers, -- Cyril Brulebois pgpJ0cwJrTNBE.pgp Description: PGP signature