Bug#464191: Sound broken with linux-image-2.6.24-1-686
So now I've got to recompile my kernel just to have sound? How nice. I haven't had to do that since about 1998. I guess this is good enough reason as any to remove Debian from my laptop. Sad too, it's been Debian since before Woody was released. ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#464191: Sound broken with linux-image-2.6.24-1-686
Package: linux-image-2.6.24-1-686 Version: 2.6.24-2 Severity: normal With the upgrade to linux-image-2.6.24-1-686, sound no onger works on this machine. Strting KDE gives me the artsmessage Error while initializing the sound driver: device /dev/dsp can't be opened (No such file or directory) It does work properly with the previous kernels, including 2.6.22-3-686. lspci lists: '$ lspci |grep audio 00:0d.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator' -- Package-specific info: ** Version: Linux version 2.6.24-1-686 (Debian 2.6.24-2) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Thu Jan 31 20:35:50 UTC 2008 ** Command line: root=/dev/hda2 ro vga=792 ** Not tainted ** Kernel log: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI Interrupt :00:07.2[D] - Link [LNKD] - GSI 10 (level, low) - IRQ 10 uhci_hcd :00:07.2: UHCI Host Controller uhci_hcd :00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd :00:07.2: irq 10, io base 0x1880 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at PCI slot :00:07.1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... usb 1-1: new low speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice hda: IBM-DARA-218000, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... SCSI subsystem initialized libata version 3.00 loaded. hda: max request size: 128KiB hda: 35433216 sectors (18141 MB) w/418KiB Cache, CHS=35152/16/63 hda: cache flushes not supported hda: hda1 hda2 hda3 usbcore: registered new interface driver hiddev input: Kensington Kensington USB/PS2 Wheel Mouse as /class/input/input1 input,hidraw0: USB HID v1.10 Mouse [Kensington Kensington USB/PS2 Wheel Mouse] on usb-:00:07.2-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input2 Real Time Clock Driver v1.12ac parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Linux agpgart interface v0.102 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Yenta: CardBus bridge found at :00:0a.0 [103c:0010] Yenta: Enabling burst memory read transactions Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket :00:0a.0, mfunc 0x012c1272, devctl 0x66 Yenta: ISA IRQ mask 0x0838, PCI irq 10 Socket status: 3006 Yenta: CardBus bridge found at :00:0a.1 [103c:0010] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket :00:0a.1, mfunc 0x012c1272, devctl 0x66 Yenta: ISA IRQ mask 0x0838, PCI irq 10 Socket status: 3006 agpgart: Detected an Intel 440BX Chipset. agpgart: AGP aperture is 64M @ 0xf800 piix4_smbus :00:07.3: Found :00:07.3 device ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt :00:0d.0[A] - Link [LNKC] - GSI 5 (level, low) - IRQ 5 ACPI: PCI interrupt for device :00:0d.0 disabled Maestro3: probe of :00:0d.0 failed with error -2 input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input4 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input5 ACPI: Sleep Button (CM) [SLP] Synaptics Touchpad, model: 1, fw: 5.4, id: 0x9b54b1, caps: 0x844793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input6 cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. ACPI: AC Adapter [ACAD] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery absent) input: Video Bus as /class/input/input7 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) IBM TrackPoint firmware: 0x0b, buttons: 2/3 input: TPPS/2 IBM TrackPoint as /class/input/input8 Adding 960112k swap on /dev/hda3. Priority:-1 extents:1 across:960112k EXT3 FS on hda2, internal journal Initializing USB Mass Storage driver... usbcore: registered
Bug#403969: tdfx crashes X with AIGLX but without (working) libglide3
On Tuesday 17 July 2007 06:14:35 am Brice Goglin wrote: Did you have a chance to try after removing libglide3 so that we know whether the original bug is fixed or not? If you don't care anymore, just let me know, I'll close the bug with an invitation to reopen in case anybody ever reproduces. Brice Sorry it's taken so long to get back to this, life got in the way. I just now removed the libglide3 packages, and sure enough, X crashed when I attempted to run glxinfo. Reinstalling libglide3 stopped the crashing. Package: xserver-xorg Version: 1:7.2-5 Package: xserver-xorg-video-tdfx Version: 1:1.3.0-1 Package: libglide3 Version: 2002.04.10-14 ...Rob -- Four puppies were harmed during the making of this email. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#403969: tdfx crashes X with AIGLX but without (working) libglide3
On Sunday 17 June 2007 09:30:04 am Brice Goglin wrote: Hi Rob, Does this crash of the X server on tdfx without libglide3 still occur nowadays? With latest xserver-xorg-core and tdfx drivers? Brice After having to rebuild the machine after a hard drive failure over the weekend, the crashes are, indeed, remedied. Hurray! Current installed versions: Package: xserver-xorg Version: 1:7.2-5 Package: xserver-xorg-video-tdfx Version: 1:1.3.0-1 Package: libglide3 Version: 2002.04.10-14 Package: mesa-utils Version: 6.5.2-5 Package: libgl1-mesa-dri Version: 6.5.2-5 Package: libgl1-mesa-glx Version: 6.5.2-5 Package: libglu1-mesa Version: 6.5.2-5 Package: xlibmesa-gl Version: 1:7.2-5 ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#392223: recurring events are missing when kontact is restarted
Some more info: If I don't set the recurring event to M-W-F, but set up a separate event for each of the 3 days (and have them recurring weekly), the events are shown properly even after a restart of Kontact. If I do try to set a single recurring event to M-W-F, the previously described behavior returns. -- ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#367308: azureus: strange config behavior, no transfers
I've recently installed a newer package, and the transfer problem seems to have been taken care of. -- ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#405126: xfe: feature request - eject
Package: xfe Version: 0.88-3.1 Severity: wishlist Xfe is a fine file manager. It is, however, lacking one feature that would make it an excellent file manager: the ability to eject media (cd, dvd, etc.). The included mount/unmount funtions seem lacking without the ability to eject media as well. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-k7 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages xfe depends on: ii libc6 2.3.6.ds1-9GNU C Library: Shared libraries ii libfox1.4 1.4.34-1 The FOX C++ GUI Toolkit ii libgcc1 1:4.1.1-21 GCC support library ii libpng12-01.2.15~beta5-1 PNG library - runtime ii libstdc++64.1.1-21 The GNU Standard C++ Library v3 ii ucf 2.0017 Update Configuration File: preserv Versions of packages xfe recommends: pn rpm none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#403969: xserver-xorg: xserver crashing, mode related?
On Friday 22 December 2006 01:52, you wrote: Try LIBGL_DEBUG=verbose glxinfo 21 /dev/null There are complaints about missing files relating to libglide3 (attached glx.log) and a file that doesn't seem to exist period (drirc), even via apt-cache search. I wasn't previously aware there was a libglide3, and don't recall it being any sort of dependency for the tdfx driver. I've had libglide2 for a while now. I just installed libglide3 and ran the same command (attached glx-postglide3.log), and there were related errors. I also temporarily commented the AIGLX line from my xorg.conf, that you advised earlier, but the crashes reoccurred. -- ...Rob $ LIBGL_DEBUG=verbose glxinfo 21 /dev/null libGL: XF86DRIGetClientDriverName: 1.3.0 tdfx (screen 0) libGL: OpenDriver: trying /usr/lib/dri/tdfx_dri.so drmOpenByBusid: Searching for BusID pci::01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 4, (OK) drmOpenByBusid: drmOpenMinor returns 4 drmOpenByBusid: drmGetBusid reports pci::01:00.0 libGL warning: 3D driver claims to not support visual 0x25 libGL warning: 3D driver claims to not support visual 0x26 libGL warning: 3D driver claims to not support visual 0x29 libGL warning: 3D driver claims to not support visual 0x2a libGL warning: 3D driver claims to not support visual 0x2d libGL warning: 3D driver claims to not support visual 0x2e libGL warning: 3D driver claims to not support visual 0x31 libGL warning: 3D driver claims to not support visual 0x32 libGL warning: 3D driver claims to not support visual 0x35 libGL warning: 3D driver claims to not support visual 0x36 libGL warning: 3D driver claims to not support visual 0x39 libGL warning: 3D driver claims to not support visual 0x3a libGL warning: 3D driver claims to not support visual 0x3d libGL warning: 3D driver claims to not support visual 0x3e libGL warning: 3D driver claims to not support visual 0x41 libGL warning: 3D driver claims to not support visual 0x42 libGL error: Can't open configuration file /etc/drirc: No such file or directory. libGL error: Can't open configuration file /home/rbochan/.drirc: No such file or directory. libGL error: can't find Glide library, dlopen(libglide3-v5.so) and dlopen(libglide3.so) both failed. libGL error: dlerror() message: libglide3.so: cannot open shared object file: No such file or directory $ LIBGL_DEBUG=verbose glxinfo 21 /dev/null libGL: XF86DRIGetClientDriverName: 1.3.0 tdfx (screen 0) libGL: OpenDriver: trying /usr/lib/dri/tdfx_dri.so drmOpenByBusid: Searching for BusID pci::01:00.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 4, (OK) drmOpenByBusid: drmOpenMinor returns 4 drmOpenByBusid: drmGetBusid reports pci::01:00.0 libGL warning: 3D driver claims to not support visual 0x25 libGL warning: 3D driver claims to not support visual 0x26 libGL warning: 3D driver claims to not support visual 0x29 libGL warning: 3D driver claims to not support visual 0x2a libGL warning: 3D driver claims to not support visual 0x2d libGL warning: 3D driver claims to not support visual 0x2e libGL warning: 3D driver claims to not support visual 0x31 libGL warning: 3D driver claims to not support visual 0x32 libGL warning: 3D driver claims to not support visual 0x35 libGL warning: 3D driver claims to not support visual 0x36 libGL warning: 3D driver claims to not support visual 0x39 libGL warning: 3D driver claims to not support visual 0x3a libGL warning: 3D driver claims to not support visual 0x3d libGL warning: 3D driver claims to not support visual 0x3e libGL warning: 3D driver claims to not support visual 0x41 libGL warning: 3D driver claims to not support visual 0x42 libGL error: Can't open configuration file /etc/drirc: No such file or directory. libGL error: Can't open configuration file /home/rbochan/.drirc: No such file or directory. libGL error: can't find Glide library, dlopen(libglide3-v5.so) and dlopen(libglide3.so) both failed. libGL error: dlerror() message: /usr/lib/libglide3.so: undefined symbol: __LINE__
Bug#403969: xserver-xorg: xserver crashing, mode related?
On Friday 22 December 2006 09:22, you wrote: retitle 403969 tdfx crashes X with AIGLX but without (working) libglide3 kthxbye On Fri, 2006-12-22 at 08:10 -0500, Rob Bochan wrote: On Friday 22 December 2006 01:52, you wrote: Try LIBGL_DEBUG=verbose glxinfo 21 /dev/null There are complaints about missing files relating to libglide3 (attached glx.log) and a file that doesn't seem to exist period (drirc), even via apt-cache search. It's an optional configuration file. Okay. I wasn't previously aware there was a libglide3, and don't recall it being any sort of dependency for the tdfx driver. See bug #387339. Fair enough. I just installed libglide3 and ran the same command (attached glx-postglide3.log), and there were related errors. That's bug #326099/#329920. I also temporarily commented the AIGLX line from my xorg.conf, that you advised earlier, but the crashes reoccurred. Yeah, it's still falling back to indirect rendering without a working Glide. It's possible that a working Glide would also fix the AIGLX crash with indirect rendering, in which case this would be another duplicate of the libglide3 bugs above, but I'm just changing the title for now. Considering the age of those, I doubt there will be any sort of resolution before the kids show up next week for LAN games over the holidays :o( Since these packages are also now in Etch, I guess I don't have much of a choice but to go back to Sarge until they're resolved. I'm no coder, but if there's anything at all I can do to help, I'd be glad to do what I can. -- ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#403969: xserver-xorg: xserver crashing, mode related?
more info from the wine.log, every one of them shows: libGL warning: 3D driver claims to not support visual 0x25 libGL warning: 3D driver claims to not support visual 0x26 libGL warning: 3D driver claims to not support visual 0x29 libGL warning: 3D driver claims to not support visual 0x2a libGL warning: 3D driver claims to not support visual 0x2d libGL warning: 3D driver claims to not support visual 0x2e libGL warning: 3D driver claims to not support visual 0x31 libGL warning: 3D driver claims to not support visual 0x32 libGL warning: 3D driver claims to not support visual 0x35 libGL warning: 3D driver claims to not support visual 0x36 libGL warning: 3D driver claims to not support visual 0x39 libGL warning: 3D driver claims to not support visual 0x3a libGL warning: 3D driver claims to not support visual 0x3d libGL warning: 3D driver claims to not support visual 0x3e libGL warning: 3D driver claims to not support visual 0x41 libGL warning: 3D driver claims to not support visual 0x42 -- ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#403969: xserver-xorg: xserver crashing, mode related?
On Thursday 21 December 2006 01:46, you wrote: Please provide a log file from a crash See attached (console.log), which contains everything I could see at the console after attempting to run glxgears. Using tail on Xorg.0.log file shows the same exact output from a second crash from glxgears. and the output from LIBGL_DEBUG=verbose glxinfo I've tried this several times, but the only thing I can get to dump to a file is: name of display: :0.0 since I keep getting dumped back to the console, and I can't run glxinfo from there to get more info. I've attached the Xorg.0.log from that crash. If you know of a way I can provide more info, I'll do whatever I can. Some notes that may or may not be relevant: - The crashing doesn't seem to occur on everything running under winex/cedega. I am able to successfully run an old copy of Irfanview and Forte Agent. Running Diablo 2 crashes the X server. - I am also noticing the crashes whenever I try to run any applications under wine (tested Forte Agent and Irfanview mentioned above, and IE6). - Crash occurs if I try to access the OpenGL section of KDE's KInfoCenter. - I'm also noticing some other artifacts from within KDE, like system tray icons blinking (not because of activity) and slow scrolling with apps like web browsers. - All this behavior is present with root as well as normal users. -- ...Rob ... (==) Using config file: /etc/X11/xorg.conf xkb_keycodes { include xfree86+aliases(qwerty) }; xkb_types { include complete }; xkb_compatibility { include complete }; xkb_symbols { include pc(pc105)+us }; xkb_geometry { include pc(pc104) }; DRIUnlock called when not locked xkb_types { include % }; xkb_compatibility { include % }; xkb_symbols { include % }; xkb_geometry { include % }; The XKEYBOARD keymap compiler (xkbcomp) reports: Error: Missing KeyNames section in a Keymap file Description of Keymap not compiled Errors from xkbcomp are not fatal to the X server (EE) Error loading keymap /var/tmp/server-0.xkm Backtrace: 0: /usr/bin/X11/X(xf86Sighandler+0x84) [0x80c4354] 1: [0xb7fd4420] 2: /usr/lib/xorg/modules/extensions/libglx.so [0xb7cbbba] 3: /usr/lib/xorg/modules/extensions/libglx.so(DoMakeCurrent+0x3bc) [0xb7c95ebc] 4: /usr/lib/xorg/modules/extensions/libglx.so(__glXMakeCurrent+0x39) [0xb7c96069] 5: /usr/lib/xorg/modules/extensions/libglx.so [0xb7c98f6a] 6: /usr/bin/X11/X(Dispatch+0x19b) [0x8086cab] 7: /usr/bin/X11/X(main+0x489) [0x806e699] 8: /lib/tls/libc.so.6(__libc_start_main+0xc8) [0xb7ddcea8] 9: /usr/bin/X11/X(FontFileCompleteXLFD+0xa9) [0x806d9d1] Fatal server error: Caught signal 11. Server aborting xinit: connection to X server lost. X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: UNKNOWN Current Operating System: Linux blah 2.6.18-3-k7 #1 SMP Sun Dec 10 20:17:39 UTC 2006 i686 Build Date: 13 December 2006 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Thu Dec 21 11:08:06 2006 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Diamond Pro 710 (**) | |--Device 3Dfx Interactive, Inc. Voodoo 4 / Voodoo 5 (**) |--Input Device Generic Keyboard (**) |--Input Device Configured Mouse (WW) The directory /usr/X11R6/lib/X11/fonts/misc does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/cyrillic does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/100dpi/ does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/75dpi/ does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/Type1 does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/100dpi does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/75dpi does not exist. Entry deleted from font path. (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/cyrillic, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) RgbPath set to /etc/X11/rgb (==) ModulePath set to /usr/lib/xorg/modules (II) Open ACPI successful (/var/run/acpid.socket) (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
Bug#403969: xserver-xorg: xserver crashing, mode related?
On Thursday 21 December 2006 12:33, you wrote: Do these crashes also occur if you disable AIGLX with Option AIGLX off in Section ServerFlags? No they do not, though I had to add that section to the xorg.conf manually. The glxgears and glxinfo programs run, as do some of the wine programs mentioned above, but not the game via winex. The output of LIBGL_DEBUG=verbose glxinfo is attached (glxinfo.log). -- ...Rob name of display: :0.0 display: :0 screen: 0 direct rendering: No server glx vendor string: SGI server glx version string: 1.2 server glx extensions: GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe, GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer client glx vendor string: SGI client glx version string: 1.4 client glx extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap GLX version: 1.2 GLX extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method, GLX_SGIS_multisample, GLX_SGIX_fbconfig OpenGL vendor string: Mesa project: www.mesa3d.org OpenGL renderer string: Mesa GLX Indirect OpenGL version string: 1.2 (1.5 Mesa 6.5.1) OpenGL extensions: GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp, GL_ARB_texture_cube_map, GL_ARB_texture_env_add, GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint, GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color, GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add, GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array, GL_APPLE_packed_pixels, GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once, GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture, GL_NV_blend_square, GL_NV_point_sprite, GL_NV_texgen_reflection, GL_NV_texture_rectangle, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays glu version: 1.3 glu extensions: GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat -- 0x23 16 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None 0x24 16 tc 0 16 0 r . . 5 6 5 0 0 0 8 0 0 0 0 0 0 Slow 0x25 16 tc 0 16 0 r . . 5 6 5 0 0 0 0 16 16 16 0 0 0 Slow 0x26 16 tc 0 16 0 r . . 5 6 5 0 0 0 8 16 16 16 0 0 0 Slow 0x27 16 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None 0x28 16 tc 0 16 0 r . . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow 0x29 16 tc 0 16 0 r . . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow 0x2a 16 tc 0 16 0 r . . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow 0x2b 16 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None 0x2c 16 tc 0 16 0 r y . 5 6 5 0 0 0 8 0 0 0 0 0 0 Slow 0x2d 16 tc 0 16 0 r y . 5 6 5 0 0 0 0 16 16 16 0 0 0 Slow 0x2e 16 tc 0 16 0 r y . 5 6 5 0 0 0 8 16 16 16 0 0 0 Slow 0x2f 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None 0x30 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow 0x31 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow 0x32 16 tc 0
Bug#403969: xserver-xorg: xserver crashing, mode related?
On Thursday 21 December 2006 13:03, you wrote: On Thu, 2006-12-21 at 12:59 -0500, Rob Bochan wrote: On Thursday 21 December 2006 12:33, you wrote: Do these crashes also occur if you disable AIGLX with Option AIGLX off in Section ServerFlags? No they do not, Then apparently the tdfx 3D driver is incompatible with AIGLX. though I had to add that section to the xorg.conf manually. The glxgears and glxinfo programs run, as do some of the wine programs mentioned above, but not the game via winex. This might be due to the lack of direct rendering. Okay, what can be done about this? Things were working well before I'd restarted my X session yesterday. Like I mentioned previously, I hadn't restarted it in quite a while, even though I'd noticed some xorg upgrades over the last month or so. Mostly because I had been bitten by this bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=389781 previously, and I'm now a bit paranoid about not having a properly working x server. The output of LIBGL_DEBUG=verbose glxinfo is attached (glxinfo.log). The stderr output is missing, so it's not clear why direct rendering is not being used. If you can tell me how to get that to you, I'd be glad to do so. -- ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#403969: xserver-xorg: xserver crashing, mode related?
Package: xserver-xorg Version: 1:7.1.0-9 Severity: important The xserver on this machine is crashing. So far, it's happening whenever I've tried to run a winex/cedega based game, tried to run glxgears, or tried to call up glxinfo. Whenever any of the aforementioened are attempted, I'm dumped back to the console (since I use startx). This has come up today, but I haven't restarted the xserver in well over a month. -- Package-specific info: Contents of /var/lib/x11/X.roster: xserver-xorg /etc/X11/X target does not match checksum in /var/lib/x11/X.md5sum. X server symlink status: lrwxrwxrwx 1 root root 13 2006-07-29 09:07 /etc/X11/X - /usr/bin/Xorg -rwxr-xr-x 1 root root 1597868 2006-12-12 21:34 /usr/bin/Xorg Contents of /var/lib/x11/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: 01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 4 / Voodoo 5 (rev 01) /etc/X11/xorg.conf unchanged from checksum in /var/lib/x11/xorg.conf.md5sum. Xorg X server configuration file status: -rw-r--r-- 1 root root 3046 2006-12-20 18:13 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type man /etc/X11/xorg.conf at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section Files FontPath/usr/share/fonts/X11/misc FontPath/usr/X11R6/lib/X11/fonts/misc FontPath/usr/share/fonts/X11/cyrillic FontPath/usr/X11R6/lib/X11/fonts/cyrillic FontPath/usr/share/fonts/X11/100dpi/:unscaled FontPath/usr/X11R6/lib/X11/fonts/100dpi/:unscaled FontPath/usr/share/fonts/X11/75dpi/:unscaled FontPath/usr/X11R6/lib/X11/fonts/75dpi/:unscaled FontPath/usr/share/fonts/X11/Type1 FontPath/usr/X11R6/lib/X11/fonts/Type1 FontPath/usr/share/fonts/X11/100dpi FontPath/usr/X11R6/lib/X11/fonts/100dpi FontPath/usr/share/fonts/X11/75dpi FontPath/usr/X11R6/lib/X11/fonts/75dpi # path to defoma fonts FontPath/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType EndSection Section Module Loadbitmap Loaddbe Loadddc Loaddri Loadextmod Loadfreetype Loadglx Loadint10 Loadvbe EndSection Section InputDevice Identifier Generic Keyboard Driver kbd Option CoreKeyboard Option XkbRules xorg Option XkbModel pc104 Option XkbLayout us EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/input/mice Option Protocol ImPS/2 Option Emulate3Buttons true EndSection Section Device Identifier 3Dfx Interactive, Inc. Voodoo 4 / Voodoo 5 Driver tdfx BusID PCI:1:0:0 VideoRam65535 EndSection Section Monitor Identifier Diamond Pro 710 Option DPMS HorizSync 30-60 VertRefresh 50-75 EndSection Section Screen Identifier Default Screen Device 3Dfx Interactive, Inc. Voodoo 4 / Voodoo 5 Monitor Generic Monitor DefaultDepth16 SubSection Display Depth 1 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 4 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 8 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 15 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 16 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 24 Modes 1024x768 800x600 640x480 EndSubSection EndSection Section ServerLayout Identifier Default Layout Screen Default Screen InputDevice Generic Keyboard
Bug#402343: xfce4 --- missing dependency on dbus
Package: xfce4 Version: 4.3.99.1 Severity: normal Installing xfce4 shoud depend on, or at minimum recommend, the installation of the dbus package. Without dbus, things like xfce4's trash does not work at all, and the user's .xsession-errors files fills with complaints about D-Bus library appears to be incorrectly set up. -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages xfce4 depends on: ii gtk2-engines-xfce 2.3.99.2-1 A GTK+-2.0 theme engine for Xfce ii thunar0.4.0rc1-2 File Manager for Xfce ii xfce4-icon-theme 4.3.99.2-1 Xfce Standard icon theme ii xfce4-mcs-plugins 4.3.99.2-1 Special modules for the xfce4-mcs- ii xfce4-panel 4.3.99.2-1 The Xfce4 desktop environment pane ii xfce4-session 4.3.99.1-1 Xfce4 Session Manager ii xfce4-utils 4.3.99.2-1 Various tools for Xfce ii xfdesktop44.3.99.1-1 Provides desktop background and ro ii xfwm4 4.3.99.2-1 window manager of the Xfce project ii xfwm4-themes 4.3.99.2-1 Theme files for xfwm4 Versions of packages xfce4 recommends: ii orage 4.3.99.1-1 Calendar for Xfce Desktop Environm ii xfce4-mixer 4.3.99.2-1 Xfce4 Mixer frontend pn xfce4-terminalnone (no description available) ii xfmedia 0.9.1-6+b1 Xfce media player ii xfprint4 4.3.99.1-1 Printer GUI for Xfce4 -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#400266: iceweasel: strange close functionality
Package: iceweasel Version: 2.0+dfsg-1 Severity: wishlist Before the transition from Firefox--Iceweasel, hitting ctrl+w would close the firefox window when only one tab was open. This is no longer the case. Now, the sequence is ctrl+shift+w, or having to use the file menu. Using ctrl+w works properly(closes the window) when Always show tab bar is UNchecked in the Tab Preferences dialog, so there's a discrepency there. At least in my case, the old behavior is preferred. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.8-2-k7 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages iceweasel depends on: ii debianutils 2.17.3 Miscellaneous utilities specific t ii fontconfig2.4.1-2generic font configuration library ii libatk1.0-0 1.12.3-1 The ATK accessibility toolkit ii libc6 2.3.6.ds1-8GNU C Library: Shared libraries ii libcairo2 1.2.4-4The Cairo 2D vector graphics libra ii libfontconfig12.4.1-2generic font configuration library ii libfreetype6 2.2.1-5FreeType 2 font engine, shared lib ii libgcc1 1:4.1.1-20 GCC support library ii libglib2.0-0 2.12.4-2 The GLib library of C routines ii libgtk2.0-0 2.8.20-3 The GTK+ graphical user interface ii libjpeg62 6b-13 The Independent JPEG Group's JPEG ii libmyspell3c2 1:3.1-17 MySpell spellchecking library ii libpango1.0-0 1.14.7-1 Layout and rendering of internatio ii libpng12-01.2.13-3 PNG library - runtime ii libstdc++64.1.1-20 The GNU Standard C++ Library v3 ii libx11-6 2:1.0.3-3 X11 client-side library ii libxft2 2.1.8.2-8 FreeType-based font drawing librar ii libxinerama1 1:1.0.1-4.1X11 Xinerama extension library ii libxp61:1.0.0.xsf1-1 X Printing Extension (Xprint) clie ii libxrender1 1:0.9.1-3 X Rendering Extension client libra ii libxt61:1.0.2-2 X11 toolkit intrinsics library ii psmisc22.3-1 Utilities that use the proc filesy ii zlib1g1:1.2.3-13 compression library - runtime iceweasel recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397512: fvwm95 has nothing when it starts
Package: fvwm95 Version: 2.0.43ba-24.2 Severity: grave Justification: renders package unusable When starting fvwm95 via startx, the screen comes up with a mouse cursor, and nothing else. Clicking activates the normal menus in fvwm95, but they are just gray boxes with no text. Attempts to login via wdm just dump the user back to the login manager. User's .xsession-errors file is filled with line after line such as: Fvwm-95: in function FvwmErrorHandler: ERROR *** internal error *** Fvwm-95: in function FvwmErrorHandler: ERROR Request 74, Error 13, EventType: 4 The Request, Error, and EventType values vary. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages fvwm95 depends on: ii libc62.3.6.ds1-7 GNU C Library: Shared libraries ii libreadline5 5.2-1 GNU readline and history libraries ii libx11-6 2:1.0.3-2 X11 client-side library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxpm4 1:3.5.5-2 X11 pixmap library ii x11-common 1:7.1.0-5 X Window System (X.Org) infrastruc Versions of packages fvwm95 recommends: ii fvwm95-icons 2.0.43ba-24.2 Win95ish icons for X ii menu 2.1.31generates programs menu for all me ii xbase-clients 1:7.1.ds-3miscellaneous X clients ii xterm 210-3.1 X terminal emulator -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397534: wdm dumps user back to login screen
Package: wdm Version: 1.28-2.1 Severity: grave Justification: renders package unusable Fresh netinstall of Etch. Attempt to login to either blackbox or fvwm95 just dumps user back to wdm login screen. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages wdm depends on: ii debconf 1.5.8Debian configuration management sy ii libc6 2.3.6.ds1-7 GNU C Library: Shared libraries ii libfontconfig1 2.4.1-2 generic font configuration library ii libice6 1:1.0.1-2X11 Inter-Client Exchange library ii libpam-modules 0.79-4 Pluggable Authentication Modules f ii libpam-runtime 0.79-4 Runtime support for the PAM librar ii libpam0g0.79-4 Pluggable Authentication Modules l ii libsm6 1:1.0.1-3X11 Session Management library ii libwraster3 0.92.0-6 Shared libraries of Window Maker r ii libx11-62:1.0.3-2X11 client-side library ii libxau6 1:1.0.1-2X11 authorisation library ii libxdmcp6 1:1.0.1-2X11 Display Manager Control Protoc ii libxext61:1.0.1-2X11 miscellaneous extension librar ii libxft2 2.1.8.2-8FreeType-based font drawing librar ii libxinerama11:1.0.1-4.1 X11 Xinerama extension library ii libxmu6 1:1.0.2-2X11 miscellaneous utility library ii psmisc 22.3-1 Utilities that use the proc filesy ii xbase-clients 1:7.1.ds-3 miscellaneous X clients ii xutils 1:7.1.ds.2-1 X Window System utility programs wdm recommends no packages. -- debconf information: * shared/default-x-display-manager: wdm wdm/daemon_name: /usr/bin/wdm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397512: fvwm95 has nothing when it starts
Some more info. I was just able to get fvwm95 to start properly, but I had to reconfigure locales, adding all the EN_US entries available (as per bug #278775). This was a fresh netinstall of Etch, and the default locales setup apparently doesn't allow fvwm95 to start properly, so I don't know if this is an issue with locales or fvwm95. -- ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#392223: recurring events are missing when kontact is restarted
Package: kontact Version: 4:3.5.5-1 Severity: important -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.8-2-k7 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) I've set up a recurring event (every M W F). If I restart Kontact, the event doesn't show up on the calendar, due to the start date showing as being after the begin date. This behavior occurs on every recurring event I've tried to set up, and returns upon restart if the event is recreated. Note, the event does show up on the summary page, but is missing from the calendar. Versions of packages kontact depends on: ii kdelibs4c2a 4:3.5.5a-1 core libraries and binaries for al ii libc62.3.6.ds1-6 GNU C Library: Shared libraries ii libgcc1 1:4.1.1-16 GCC support library ii libkcal2b4:3.5.5-1 KDE calendaring library ii libkdepim1a 4:3.5.5-1 KDE PIM library ii libkpimidentities1 4:3.5.5-1 KDE PIM user identity information ii libqt3-mt3:3.3.6-4 Qt GUI Library (Threaded runtime v ii libstdc++6 4.1.1-16The GNU Standard C++ Library v3 Versions of packages kontact recommends: ii kaddressbook 4:3.5.5-1 KDE NG addressbook application ii kitchensync 4:3.5.5-1 Synchronization framework ii kmail 4:3.5.5-1 KDE Email client pn knode none (no description available) pn knotesnone (no description available) ii korganizer4:3.5.5-1 KDE personal organizer -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#388645: akregator sends wrong message type to KDE
Package: akregator Version: 4:3.5.4-1 Severity: minor When deleting articles from within akregator, a message window asking: Are you sure you want to delete the selected (#) articles? pops up. It's asking a question, however it triggers the A Warning message is being shown sound from the KDE System Notifications. There is no way to turn off the verification to remove the article (which would be _really_ nice), and other than setting the KDE System Notifications to use no sound for it's warning function, there's no other way to stop this behavior. It's minor, but also quite annoying. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.8-2-k7 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages akregator depends on: ii kdelibs4c2a 4:3.5.4-3 core libraries and binaries for al ii libc62.3.6.ds1-4 GNU C Library: Shared libraries ii libgcc1 1:4.1.1-13 GCC support library ii libkdepim1a 4:3.5.4-1 KDE PIM library ii libqt3-mt3:3.3.6-4 Qt GUI Library (Threaded runtime v ii libstdc++6 4.1.1-13The GNU Standard C++ Library v3 akregator recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#386000: xlibs uninstallable/missing from Sid
Package: xlibs Severity: grave Justification: renders package unusable I'm using Sid. While installing a 3rd party package, xlibs, on which it is dependent, wasn't installed. Upon attempting to install xlibs, I received the following message: Package xlibs is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source. Searching http://packages.debian.org shows a listing for xlibs ( http://packages.debian.org/unstable/libs/xlibs ) and a link to download the file, however, the file doesn't exist on any of the download pool links. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.8-3-686 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#386000: xlibs uninstallable/missing from Sid
On Monday 04 September 2006 12:26, you wrote: The xlibs package doesn't exist any more, so your third party package needs to be changed to take this into account. Cheers, Julien Out of curiosity, then why is there still an Unstable package page for it at packages.debian.org? Also, I was able to manually download the package version that's still in Experimental (so a package does still exist) and satisfy the dependency with that. ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#385890: pan: New version loses 'per group' threading and doesn't keep layout
Package: pan Version: 0.110-1 Severity: normal With this latest version of Pan Newsreader in Sid, I've lost the ability to thread headers on a 'per group' basis. With previous versions, I was able to thread one group via author, another group via subject, and others via date. This new version threads everything based on what was last chosen, regardless of the group. Regarding the layout, this new version doesn't save the layout spacing and I have to resize the groups pane, header pane, and message pane every single time I use Pan. i.e. I can't set the panes to a specific size and have those sizes there after Pan closes. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.8-2-k7 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages pan depends on: ii aspell 0.60.4-4GNU Aspell spell-checker ii libaspell15 0.60.4-4GNU Aspell spell-checker runtime l ii libatk1.0-0 1.12.1-1The ATK accessibility toolkit ii libc62.3.6.ds1-4 GNU C Library: Shared libraries ii libcairo21.2.4-1 The Cairo 2D vector graphics libra ii libfontconfig1 2.3.2-7 generic font configuration library ii libgcc1 1:4.1.1-13 GCC support library ii libglib2.0-0 2.10.3-3The GLib library of C routines ii libgmime-2.0-2 2.2.3-1 MIME library, unstable version ii libgtk2.0-0 2.8.20-1The GTK+ graphical user interface ii libgtkspell0 2.0.10-3+b1 a spell-checking addon for GTK's T ii libpango1.0-01.12.3-2Layout and rendering of internatio ii libpcre3 6.4-2 Perl 5 Compatible Regular Expressi ii libstdc++6 4.1.1-13The GNU Standard C++ Library v3 ii libx11-6 2:1.0.0-8 X11 client-side library ii libxcursor1 1.1.7-4 X cursor management library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxfixes3 1:3.0.1.2-4 X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.1-3 X11 Input extension library ii libxinerama1 1:1.0.1-4.1 X11 Xinerama extension library ii libxrandr2 2:1.1.0.2-4 X11 RandR extension library ii libxrender1 1:0.9.1-3 X Rendering Extension client libra ii zlib1g 1:1.2.3-13 compression library - runtime pan recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#358646: xserver-xorg: X fails to start leaving no access to keyboard or mouse
I no longer have the hardware related to this initial report, so I can no longer add to (sic) any followup. ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#367308: azureus: strange config behavior, no transfers
Package: azureus Version: 2.4.0.2-1 Severity: important Just updated to Azureus 2.4.0.2-1, I can't transfer anything. The seeds and peers columns show peers, but nothing connected. This is the case whether or not I use my existing config, or start fresh. Also, this new version has created 2 directories in the user's home: ..Azureus and ..azureus I don't know if that has anything to do with the lack of transfers. I temporarily removed those 2 directories, and they were recreated upon reopening azureus. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.8-2-k7 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages azureus depends on: ii gij-4.0 [java-virtual-mac 4.0.3-2The GNU Java bytecode interpreter ii gij-4.1 [java-virtual-mac 4.1.0-2j1 The GNU Java bytecode interpreter ii kaffe-pthreads [java-virt 2:1.1.7-2 A POSIX threads enabled version of ii libcommons-cli-java 1.0-8 API for working with the command l ii liblog4j1.2-java 1.2.13-1 Logging library for java ii libseda-java 3.0-3 the Staged Event-Driven Architectu ii libswt-gtk-3.1-java 3.1.2-2Standard Widget Toolkit for GTK Ja ii sun-j2re1.5 [java2-runtim 1.5.0+update04 Java(TM) 2 RE, Standard Edition, S Versions of packages azureus recommends: pn java-package none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363359: xserver-xorg: Resolution has changed from 100 dpi, to 75 dpi
On Friday 21 April 2006 10:13, Michel Dänzer wrote: Hmm indeed, it's not in /var/cache/apt/archives/xbase-clients_1% 3a7.0.0-4_powerpc.deb, so how come it's in /var/lib/dpkg/info/xbase-clients.list here? *shrug* This issue seems to be remedied with the update from Tue, 25 Apr 2006 to xbase-clients 1:7.0.0-5. The xserverrc file now re-exists in /etc/X11/xinit. Thank you for your attention. ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363359: xserver-xorg: Resolution has changed from 100 dpi, to 75 dpi
On Friday 21 April 2006 06:06, Michel Dänzer wrote: [EMAIL PROTECTED]|11:05:36 dpkg -S /etc/X11/xinit/xserverrc xbase-clients: /etc/X11/xinit/xserverrc [EMAIL PROTECTED]:~$ dpkg -S /etc/X11/xinit/xserverrc dpkg: /etc/X11/xinit/xserverrc not found. [EMAIL PROTECTED]|11:06:54 apt-cache policy xbase-clients xbase-clients: Installed: 1:7.0.0-4 Candidate: 1:7.0.0-4 Version table: *** 1:7.0.0-4 0 500 http://ftp.ch.debian.org sid/main Packages 100 /var/lib/dpkg/status [EMAIL PROTECTED]:~$ apt-cache policy xbase-clients xbase-clients: Installed: 1:7.0.0-4 Candidate: 1:7.0.0-4 Version table: *** 1:7.0.0-4 0 500 http://ftp.us.debian.org unstable/main Packages 100 /var/lib/dpkg/status What does grep xserverrc /var/lib/dpkg/info/xbase-clients.* say on your system? (XSF: It's not listed as a conffile here, is that intentional?) [EMAIL PROTECTED]:~$ grep xserverrc /var/lib/dpkg/info/xbase-clients.* [EMAIL PROTECTED]:~$ FYI, when the new Xorg packages came in and I had no X at all, I purged all the X related packages in an attempt to get X working again - a 'fresh start', if you will. I would imagine that's why I have no xserverrc, which would have been left over from the previous versions, since it's no longer included in xbase-clients. I have no idea if the non-inclusion is intentional or not. ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363359: xserver-xorg: Resolution has changed from 100 dpi, to 75 dpi
On Friday 21 April 2006 10:13, Michel Dänzer wrote: Hmm indeed, it's not in /var/cache/apt/archives/xbase-clients_1% 3a7.0.0-4_powerpc.deb, so how come it's in /var/lib/dpkg/info/xbase-clients.list here? *shrug* You're the guy with the @debian.org email address... you tell me ;o) ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363359: xserver-xorg: Resolution has changed from 100 dpi, to 75 dpi
On Thursday 20 April 2006 13:52, you wrote: Have you always started X with startx? If so, then most likely the -dpi 100 was in some config file that is gone or no longer honoured now. Yep, since I first installed the machine with a Woody base and dist-upgraded to Sid (mid-2003 or so), I've always used startx, and the behavior's been consistent up until the Xorg 7.x packages were introduced last week.That's why I reported this in the first place. ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363359: xserver-xorg: Resolution has changed from 100 dpi, to 75 dpi
On Thursday 20 April 2006 04:18, you wrote: Basically, you'd have to compare config and log files from before and after. OK, the log files are long gone, but I do have the previous xorg.conf backed up. The only differences in the new config file that I'm seeing are 1) a lack of GLcore in the modules section, and 2) the new section pertaining to the Synaptics Touchpad which has been giving me fits as well(see bug #363363). No, this shows *startx* being passed -dpi 100, not the X server. Try startx -- -dpi 100 OK, now that I have the syntax correct, I can startx properly with 100 dpi. [EMAIL PROTECTED]:~$ ps ax |grep x 5068 tty1 S+ 0:00 /bin/sh /usr/bin/startx -- -dpi 100 5085 tty1 S+ 0:00 xinit /home/rbochan/.xinitrc -- /usr/bin/X -dpi 100 -auth /home/rbochan/.serverauth.5068 However, why am I having to add the dpi switch to the startx command now, after all this time (2+ years) running Sid on the machine without having to do so before? It has _always_ defaulted to 100 dpi previously, even when XFree86 was still in the rotation. ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363359: xserver-xorg: Resolution has changed from 100 dpi, to 75 dpi
On Thursday 20 April 2006 16:27, you wrote: If I remember correctly (I hope I do, but I'm not quite sure), the file /etc/X11/xinit/xserverrc, which startx uses, contained the following command in woody and sarge: exec /usr/bin/X11/X -dpi 100 -nolisten tcp Perhaps this has changed in Xorg 7.x? Good eye! Looks like it has. That file doesn't exist on the machine in question, but it still exists on my machine which I haven't yet updated (and does indeed include the switch mentioned). Also, according to a search at packages.debian.org http://packages.debian.org/cgi-bin/search_contents.pl?word=xserverrcsearchmode=searchfilescase=insensitiveversion=unstablearch=i386 the file xserverrc doesn't exist in any packages in Sid. xbase-clients (from which that file originates in Sarge and Etch) no longer contains that file, and I have no idea what might 'replace' it nor am I familiar enough yet with all the new Xorg things to figure how to mimic it's previous behavior short of having to add the switch manually to the startx command - every time I use it. I remember previously having to remove the -dpi 100 manually, because I wanted to specify the actual resolution in the configuration file. I never understood why the Debian default setting was to override anything specified in the server configuration file, so if this default command-line argument was removed in Xorg 7, I'm personally quite happy with the change. However, perhaps it should be documented, e.g., in the NEWS file? (I don't know if it already is, I haven't looked at the 7.x packages yet.) I just did, and I saw no mention of the changed/missing xserverrc file in any of the changelog/NEWS files for xserver-xorg, xserver-xorg-core, or xbase-clients Another possibility would be to ask for the resolution when the X packages are configured, and write this out to the auto-generated X server configuration file. I'd agree, that would probably be well fitted to the advanced options during the initial and reconfiguring. I think the proper place to configure the resolution should be the server configuration file, since that contains all the other information about the monitor (such as the supported frequencies, if they are not autodetected), and since (I think) the server command-line arguments need to be specified in multiple files (at least previously, xserverrc applied only to startx and, for example, xdm had its own configuration file where the server command-line options could be specified - I don't know if this has changed recently). Nor do I. ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363363: xserver-xorg: Lost ability to use external PS/2 mouse
On Wednesday 19 April 2006 02:44, you wrote: Please define 'inability to use the PS/2 mouse'. There is no response from the attached PS/2 mouse whatsoever... no movement, no clicks, no nothing. The only thing that's changed is the new xorg packages. Trying all (2 were listed) available mouse options via dpkg-reconfigure has had no effect. The mouse still works properly on the dual-booted windows install, so it's not broken hardware. Please post X config and log files. see attached BTW, is xserver-xorg-input-synaptics installed? Yes, though I originally had to install it manually because it wasn't included with the xserver-xorg-input-all meta package (which apparently has been remedied). X wouldn't start at all without it, complaining about the missing synaptics driver. ...Rob # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type man /etc/X11/xorg.conf at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section Files FontPath/usr/share/fonts/X11/misc FontPath/usr/share/fonts/X11/cyrillic FontPath/usr/share/fonts/X11/100dpi/:unscaled FontPath/usr/share/fonts/X11/75dpi/:unscaled FontPath/usr/share/fonts/X11/Type1 FontPath/usr/share/fonts/X11/100dpi FontPath/usr/share/fonts/X11/75dpi # path to defoma fonts FontPath/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType EndSection Section Module Loadbitmap Loaddbe Loadddc Loaddri Loadextmod Loadfreetype Loadglx Loadint10 Loadtype1 Loadvbe EndSection Section InputDevice Identifier Generic Keyboard Driver kbd Option CoreKeyboard Option XkbRules xorg Option XkbModel pc104 Option XkbLayout us EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/input/mice Option Protocol ExplorerPS/2 Option Emulate3Buttons true EndSection Section InputDevice Identifier Synaptics Touchpad Driver synaptics Option SendCoreEventstrue Option Device/dev/psaux Option Protocol auto-dev Option HorizScrollDelta 0 EndSection Section Device Identifier ATI Technologies, Inc. Rage Mobility P/M AGP 2x Driver ati BusID PCI:1:0:0 VideoRam8192 EndSection Section Monitor Identifier Omnibook LCD Option DPMS HorizSync 30-60 VertRefresh 50-75 EndSection Section Screen Identifier Default Screen Device ATI Technologies, Inc. Rage Mobility P/M AGP 2x Monitor Omnibook LCD DefaultDepth16 SubSection Display Depth 1 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 4 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 8 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 15 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 16 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 24 Modes 1024x768 800x600 640x480 EndSubSection EndSection Section ServerLayout Identifier Default Layout Screen Default Screen InputDevice Generic Keyboard InputDevice Configured Mouse InputDevice Synaptics Touchpad EndSection Section DRI Mode0666 EndSection _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/lap:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 X Window System Version 7.0.0 Release
Bug#363359: xserver-xorg: Resolution has changed from 100 dpi, to 75 dpi
On Wed, 19 Apr 2006 12:26, you wrote: X has always defaulted to 75 DPI, in the absence of additional configuration or information such as EDID. Please try to find out why the effective DPI has changed for you by comparing config and/or log files, etc. This was not the case before these new packages, at least according to the KDE KInfocenter X-Server section. It always showed 100x100 dpi previously, now it shows 75x75 dpi. I haven't done the updates on my desktop machine, which clones my laptop install, and it still shows 100x100 dpi. Both machines are using startx instead of a login manager. Adding the -dpi switch to the startx command also has no effect. Also, is the difference actually in the DPI value as reported by xdpyinfo, or could it just be that the 75 DPI bitmap fonts now precede the 100 DPI ones in the font path? xdpyinfo output is attached. The 100 dpi fonts precede the 75 dpi fonts in the xorg.conf: Section Files FontPath/usr/share/fonts/X11/misc FontPath/usr/share/fonts/X11/cyrillic FontPath/usr/share/fonts/X11/100dpi/:unscaled FontPath/usr/share/fonts/X11/75dpi/:unscaled FontPath/usr/share/fonts/X11/Type1 FontPath/usr/share/fonts/X11/100dpi FontPath/usr/share/fonts/X11/75dpi # path to defoma fonts FontPath/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType EndSection Once again, my apologies about the original address typo, I didn't realize the typo'd message had even gone out. ...Rob name of display::0.0 version number:11.0 vendor string:The X.Org Foundation vendor release number:7000 X.Org version: 7.0.0 maximum request size: 16777212 bytes motion buffer size: 256 bitmap unit, bit order, padding:32, LSBFirst, 32 image byte order:LSBFirst number of supported pixmap formats:7 supported pixmap formats: depth 1, bits_per_pixel 1, scanline_pad 32 depth 4, bits_per_pixel 8, scanline_pad 32 depth 8, bits_per_pixel 8, scanline_pad 32 depth 15, bits_per_pixel 16, scanline_pad 32 depth 16, bits_per_pixel 16, scanline_pad 32 depth 24, bits_per_pixel 32, scanline_pad 32 depth 32, bits_per_pixel 32, scanline_pad 32 keycode range:minimum 8, maximum 255 focus: window 0x1c00273, revert to PointerRoot number of extensions:29 BIG-REQUESTS DAMAGE DOUBLE-BUFFER DPMS Extended-Visual-Information GLX MIT-SCREEN-SAVER MIT-SHM MIT-SUNDRY-NONSTANDARD RANDR RENDER SECURITY SGI-GLX SHAPE SYNC TOG-CUP X-Resource XC-APPGROUP XC-MISC XFIXES XFree86-Bigfont XFree86-DGA XFree86-DRI XFree86-Misc XFree86-VidModeExtension XInputExtension XKEYBOARD XTEST XVideo default screen number:0 number of screens:1 screen #0: dimensions:1024x768 pixels (347x260 millimeters) resolution:75x75 dots per inch depths (7):16, 1, 4, 8, 15, 24, 32 root window id:0x44 depth of root window:16 planes number of colormaps:minimum 1, maximum 1 default colormap:0x20 default number of colormap cells:64 preallocated pixels:black 0, white 65535 options:backing-store NO, save-unders NO largest cursor:64x64 current input event mask:0xfa4035 KeyPressMask ButtonPressMask EnterWindowMask LeaveWindowMask KeymapStateMask StructureNotifyMask SubstructureNotifyMask SubstructureRedirectMask FocusChangeMask PropertyChangeMask ColormapChangeMask number of visuals:8 default visual id: 0x23 visual: visual id:0x23 class:TrueColor depth:16 planes available colormap entries:64 per subfield red, green, blue masks:0xf800, 0x7e0, 0x1f significant bits in color specification:8 bits visual: visual id:0x24 class:TrueColor depth:16 planes available colormap entries:64 per subfield red, green, blue masks:0xf800, 0x7e0, 0x1f significant bits in color specification:8 bits visual: visual id:0x25 class:TrueColor depth:16 planes available colormap entries:64 per subfield red, green, blue masks:0xf800, 0x7e0, 0x1f significant bits in color specification:8 bits visual: visual id:0x26 class:TrueColor depth:16 planes available colormap entries:64 per subfield red, green, blue masks:0xf800, 0x7e0, 0x1f significant bits in color specification:8 bits visual: visual id:0x27 class:DirectColor depth:16 planes available colormap entries:64 per subfield red, green, blue masks:0xf800, 0x7e0, 0x1f significant bits in color specification:8 bits visual: visual id:0x28 class:DirectColor depth:16 planes available
Bug#363363: xserver-xorg: Lost ability to use external PS/2 mouse
On Wednesday 19 April 2006 08:50, you wrote: As you're running a 2.4 kernel, the PS/2 mouse is probably represented by /dev/psaux instead of /dev/input/mice. I just tried that per your advice, and though X was able to start, neither the mouse nor the synaptics touchpad responded at all. Xorg complained about: (EE) Synaptics Touchpad no synaptics touchpad detected and no repeater device ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363363: xserver-xorg: Lost ability to use external PS/2 mouse
On Wednesday 19 April 2006 10:09, you wrote: This was also in the log file you posted. Does the touchpad work if you use /dev/input/mice for the mouse? Yes, when using that setting, the touchpad works fine. Neither /dev/input/mice nor /dev/psaux for the mouse setting gets the mouse functioning again, and as in my previous reply, /dev/psaux for the mouse setting actually stops the touchpad from working as well. ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363359: xserver-xorg: Resolution has changed from 100 dpi, to 75 dpi
On Wednesday 19 April 2006 10:07, you wrote: Again, this must have been either due to the driver obtaining additional information, e.g. via EDID, I have no idea how to figure that out. If you can tell me, I'd be glad to provide any additional information that I can. or due to configuration, either via the DisplaySize directive in the xorg.conf Monitor section or via the -dpi command line switch. I don't see that directive in my xorg.conf (using the advanced options for monitor setup via dpkg-reconfigure): Section Monitor Identifier Omnibook LCD Option DPMS HorizSync 30-60 VertRefresh 50-75 EndSection Weird, the command line switch should always override anything else. Have you confirmed that the switch is actually passed to the X server, e.g. using ps? ps info from the laptop: [EMAIL PROTECTED]:~$ ps ax |grep x 1002 tty1 S+ 0:00 /bin/sh /usr/bin/startx -dpi 100 1018 tty1 S+ 0:00 xinit xterm -dpi 100 -- -auth /home/rbochan/.serverauth.1002 1076 ?S 0:00 xfe Seems to show it properly, but the fonts are still small, and KInfocenter still shows 75x75 dpi. ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363361: xserver-xorg: Resolution has changed from 100 dpi to 75 dpi
Package: xserver-xorg Version: 1:7.0.14 Severity: normal The 7.x xorg transition has intruced using 75 dpi resolution, it was previously 100 dpi. I'm using KDE, and the fonts are quite small now, which is rather unpleasant on a 13.5 inch laptop screen (HP Omnibook 6000). -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.25-lap3 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages xserver-xorg depends on: ii debconf 1.4.72 Debian configuration management sy ii x11-common 1:7.0.14X Window System (X.Org) infrastruc ii xbase-clients1:7.0.0-4 miscellaneous X clients ii xkb-data 0.8-5 X Keyboard Extension (XKB) configu ii xserver-xorg-core1:1.0.2-5 X.Org X server -- core server ii xserver-xorg-input-all 1:7.0.14the X.Org X server -- input driver ii xserver-xorg-input-evdev [xs 1:1.0.0.5-2 X.Org X server -- evdev input driv ii xserver-xorg-input-kbd [xser 1:1.0.1.3-2 X.Org X server -- keyboard input d ii xserver-xorg-input-mouse [xs 1:1.0.4-2 X.Org X server -- mouse input driv ii xserver-xorg-video-ati [xser 1:6.5.7.3-3 X.Org X server -- ATI display driv Versions of packages xserver-xorg recommends: ii discover1 1.7.18hardware identification system ii laptop-detect 0.12.1attempt to detect a laptop ii mdetect0.5.2.1 mouse device autodetection tool ii xresprobe 0.4.23debian1 X Resolution Probe -- debconf information: xserver-xorg/multiple_possible_x-drivers: * xserver-xorg/config/monitor/use_sync_ranges: true * xserver-xorg/config/inputdevice/mouse/port: /dev/input/mice xserver-xorg/config/doublequote_in_string_error: xserver-xorg/config/monitor/screen-size: 17 inches (430 mm) * shared/default-x-server: xserver-xorg * xserver-xorg/autodetect_monitor: false * xserver-xorg/config/inputdevice/mouse/protocol: ImPS/2 shared/no_known_x-server: * xserver-xorg/config/display/default_depth: 16 * xserver-xorg/config/display/modes: 1024x768, 800x600, 640x480 xserver-xorg/config/device/bus_id_error: xserver-xorg/config/monitor/vert-refresh: 50-75 * xserver-xorg/config/inputdevice/keyboard/options: * xserver-xorg/autodetect_keyboard: false * xserver-xorg/config/device/use_fbdev: false * xserver-xorg/config/inputdevice/keyboard/variant: xserver-xorg/config/nonnumeric_string_error: * xserver-xorg/config/inputdevice/keyboard/layout: us * xserver-xorg/config/modules: bitmap, dbe, ddc, dri, extmod, freetype, glx, int10, type1, vbe * xserver-xorg/config/monitor/identifier: Omnibook LCD * xserver-xorg/config/inputdevice/mouse/emulate3buttons: true xserver-xorg/autodetect_mouse: true xserver-xorg/config/monitor/horiz-sync: 30-60 * xserver-xorg/config/device/video_ram: 8192 xserver-xorg/config/monitor/range_input_error: * xserver-xorg/config/inputdevice/keyboard/model: pc104 * xserver-xorg/config/device/driver: ati * xserver-xorg/config/device/identifier: ATI Technologies, Inc. Rage Mobility P/M AGP 2x * xserver-xorg/config/monitor/selection-method: Medium xserver-xorg/config/null_string_error: shared/multiple_possible_x-servers: * xserver-xorg/config/device/bus_id: PCI:1:0:0 * xserver-xorg/config/write_files_section: true * xserver-xorg/autodetect_video_card: true * xserver-xorg/config/monitor/mode-list: 1024x768 @ 75Hz * xserver-xorg/config/inputdevice/keyboard/rules: xorg -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363359: xserver-xorg: Resolution has changed from 100 dpi to 75 dpi
Package: xserver-xorg Version: 1:7.0.14 Severity: normal The 7.x xorg transition has intruced using 75 dpi resolution, it was previously 100 dpi. I'm using KDE, and the fonts are quite small now, which is rather unpleasant on a 13.5 inch laptop screen (HP Omnibook 6000). -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.25-lap3 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages xserver-xorg depends on: ii debconf 1.4.72 Debian configuration management sy ii x11-common 1:7.0.14X Window System (X.Org) infrastruc ii xbase-clients1:7.0.0-4 miscellaneous X clients ii xkb-data 0.8-5 X Keyboard Extension (XKB) configu ii xserver-xorg-core1:1.0.2-5 X.Org X server -- core server ii xserver-xorg-input-all 1:7.0.14the X.Org X server -- input driver ii xserver-xorg-input-evdev [xs 1:1.0.0.5-2 X.Org X server -- evdev input driv ii xserver-xorg-input-kbd [xser 1:1.0.1.3-2 X.Org X server -- keyboard input d ii xserver-xorg-input-mouse [xs 1:1.0.4-2 X.Org X server -- mouse input driv ii xserver-xorg-video-ati [xser 1:6.5.7.3-3 X.Org X server -- ATI display driv Versions of packages xserver-xorg recommends: ii discover1 1.7.18hardware identification system ii laptop-detect 0.12.1attempt to detect a laptop ii mdetect0.5.2.1 mouse device autodetection tool ii xresprobe 0.4.23debian1 X Resolution Probe -- debconf information: xserver-xorg/multiple_possible_x-drivers: * xserver-xorg/config/monitor/use_sync_ranges: true * xserver-xorg/config/inputdevice/mouse/port: /dev/input/mice xserver-xorg/config/doublequote_in_string_error: xserver-xorg/config/monitor/screen-size: 17 inches (430 mm) * shared/default-x-server: xserver-xorg * xserver-xorg/autodetect_monitor: false * xserver-xorg/config/inputdevice/mouse/protocol: ImPS/2 shared/no_known_x-server: * xserver-xorg/config/display/default_depth: 16 * xserver-xorg/config/display/modes: 1024x768, 800x600, 640x480 xserver-xorg/config/device/bus_id_error: xserver-xorg/config/monitor/vert-refresh: 50-75 * xserver-xorg/config/inputdevice/keyboard/options: * xserver-xorg/autodetect_keyboard: false * xserver-xorg/config/device/use_fbdev: false * xserver-xorg/config/inputdevice/keyboard/variant: xserver-xorg/config/nonnumeric_string_error: * xserver-xorg/config/inputdevice/keyboard/layout: us * xserver-xorg/config/modules: bitmap, dbe, ddc, dri, extmod, freetype, glx, int10, type1, vbe * xserver-xorg/config/monitor/identifier: Omnibook LCD * xserver-xorg/config/inputdevice/mouse/emulate3buttons: true xserver-xorg/autodetect_mouse: true xserver-xorg/config/monitor/horiz-sync: 30-60 * xserver-xorg/config/device/video_ram: 8192 xserver-xorg/config/monitor/range_input_error: * xserver-xorg/config/inputdevice/keyboard/model: pc104 * xserver-xorg/config/device/driver: ati * xserver-xorg/config/device/identifier: ATI Technologies, Inc. Rage Mobility P/M AGP 2x * xserver-xorg/config/monitor/selection-method: Medium xserver-xorg/config/null_string_error: shared/multiple_possible_x-servers: * xserver-xorg/config/device/bus_id: PCI:1:0:0 * xserver-xorg/config/write_files_section: true * xserver-xorg/autodetect_video_card: true * xserver-xorg/config/monitor/mode-list: 1024x768 @ 75Hz * xserver-xorg/config/inputdevice/keyboard/rules: xorg -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363363: xserver-xorg: Lost ability to use external PS/2 mouse
Package: xserver-xorg Version: 1:7.0.14 Severity: important The transistion into version 7 of xorg has left me without the ability to use the PS/2 mouse I have attached to my laptop (HP Omnibook 6000). I was able to use both the synaptics touchpad and the attached PS/2 mouse at any time before the new packages. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.25-lap3 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages xserver-xorg depends on: ii debconf 1.4.72 Debian configuration management sy ii x11-common 1:7.0.14X Window System (X.Org) infrastruc ii xbase-clients1:7.0.0-4 miscellaneous X clients ii xkb-data 0.8-5 X Keyboard Extension (XKB) configu ii xserver-xorg-core1:1.0.2-5 X.Org X server -- core server ii xserver-xorg-input-all 1:7.0.14the X.Org X server -- input driver ii xserver-xorg-input-evdev [xs 1:1.0.0.5-2 X.Org X server -- evdev input driv ii xserver-xorg-input-kbd [xser 1:1.0.1.3-2 X.Org X server -- keyboard input d ii xserver-xorg-input-mouse [xs 1:1.0.4-2 X.Org X server -- mouse input driv ii xserver-xorg-video-ati [xser 1:6.5.7.3-3 X.Org X server -- ATI display driv Versions of packages xserver-xorg recommends: ii discover1 1.7.18hardware identification system ii laptop-detect 0.12.1attempt to detect a laptop ii mdetect0.5.2.1 mouse device autodetection tool ii xresprobe 0.4.23debian1 X Resolution Probe -- debconf information: xserver-xorg/multiple_possible_x-drivers: * xserver-xorg/config/monitor/use_sync_ranges: true * xserver-xorg/config/inputdevice/mouse/port: /dev/input/mice xserver-xorg/config/doublequote_in_string_error: xserver-xorg/config/monitor/screen-size: 17 inches (430 mm) * shared/default-x-server: xserver-xorg * xserver-xorg/autodetect_monitor: false * xserver-xorg/config/inputdevice/mouse/protocol: ImPS/2 shared/no_known_x-server: * xserver-xorg/config/display/default_depth: 16 * xserver-xorg/config/display/modes: 1024x768, 800x600, 640x480 xserver-xorg/config/device/bus_id_error: xserver-xorg/config/monitor/vert-refresh: 50-75 * xserver-xorg/config/inputdevice/keyboard/options: * xserver-xorg/autodetect_keyboard: false * xserver-xorg/config/device/use_fbdev: false * xserver-xorg/config/inputdevice/keyboard/variant: xserver-xorg/config/nonnumeric_string_error: * xserver-xorg/config/inputdevice/keyboard/layout: us * xserver-xorg/config/modules: bitmap, dbe, ddc, dri, extmod, freetype, glx, int10, type1, vbe * xserver-xorg/config/monitor/identifier: Omnibook LCD * xserver-xorg/config/inputdevice/mouse/emulate3buttons: true xserver-xorg/autodetect_mouse: true xserver-xorg/config/monitor/horiz-sync: 30-60 * xserver-xorg/config/device/video_ram: 8192 xserver-xorg/config/monitor/range_input_error: * xserver-xorg/config/inputdevice/keyboard/model: pc104 * xserver-xorg/config/device/driver: ati * xserver-xorg/config/device/identifier: ATI Technologies, Inc. Rage Mobility P/M AGP 2x * xserver-xorg/config/monitor/selection-method: Medium xserver-xorg/config/null_string_error: shared/multiple_possible_x-servers: * xserver-xorg/config/device/bus_id: PCI:1:0:0 * xserver-xorg/config/write_files_section: true * xserver-xorg/autodetect_video_card: true * xserver-xorg/config/monitor/mode-list: 1024x768 @ 75Hz * xserver-xorg/config/inputdevice/keyboard/rules: xorg -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#361421: kde: alt+tab functionality lost
Package: kde Severity: normal I've lost the ability to Traverse windows on all desktops when using alt+tab in KDE. Changing that particular setting in the 'Desktop/Window Behavior' section of the KDE Control Center has no effect. Only windows in the current desktop are able to be changed via alt+tab. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.8-2-k7 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#358855: modconf: unable to enter kernel/drivers/net
Package: modconf Version: 0.3.0 Severity: normal When using modconf to insert/remove modules, I am unable to enter the kernel/drivers/net section. When I attempt to do so, modconf seems to hang for a moment, then drops back to the main menu. This is the case whether or not a network card module is already loaded. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.8-2-k7 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages modconf depends on: ii module-init-tools 3.2.2-2tools for managing Linux kernel mo ii modutils 2.4.27.0-5 Linux module utilities ii whiptail [whiptail-provider] 0.52.2-2 Displays user-friendly dialog boxe modconf recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#358646: xserver-xorg: X fails to start leaving no access to keyboard or mouse
Package: xserver-xorg Version: 6.9.0.dfsg.1-5 Severity: important Since the 6.9.x versions of xserver-xorg and its related packages, X fails to start whenever I try to start X (manually or via login manger). This locks the keyboard and mouse, leaving no local access to the machine what-so-ever, short of a hard-reboot. Remote access is still possible. Reverting the 49 or so packages to the 6.8.2x versions allows X to start normally. Video card is a 3Dfx Voodoo5. -- Package-specific info: Contents of /var/lib/xfree86/X.roster: xserver-xfree86 xserver-xorg /etc/X11/X target unchanged from checksum in /var/lib/xfree86/X.md5sum. X server symlink status: lrwxrwxrwx 1 root root 17 Jan 1 13:28 /etc/X11/X - /usr/bin/X11/Xorg -rwxr-xr-x 1 root root 1878204 Mar 20 11:25 /usr/bin/X11/Xorg Contents of /var/lib/xfree86/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: :01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 4 / Voodoo 5 (rev 01) /etc/X11/xorg.conf unchanged from checksum in /var/lib/xfree86/xorg.conf.md5sum. Xorg X server configuration file status: -rw-r--r-- 1 root root 3083 Jan 1 13:31 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # xorg.conf (Xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type man xorg.conf at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following commands as root: # # cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom # md5sum /etc/X11/xorg.conf /var/lib/xfree86/xorg.conf.md5sum # dpkg-reconfigure xserver-xorg Section Files FontPathunix/:7100# local font server # if the local font server has problems, we can fall back on these FontPath/usr/lib/X11/fonts/misc FontPath/usr/lib/X11/fonts/cyrillic FontPath/usr/lib/X11/fonts/100dpi/:unscaled FontPath/usr/lib/X11/fonts/75dpi/:unscaled FontPath/usr/lib/X11/fonts/Type1 FontPath/usr/lib/X11/fonts/CID FontPath/usr/lib/X11/fonts/100dpi FontPath/usr/lib/X11/fonts/75dpi EndSection Section Module Loadbitmap Loaddbe Loadddc Loaddri Loadextmod Loadfreetype Loadglx Loadint10 Loadrecord Loadtype1 Loadvbe EndSection Section InputDevice Identifier Generic Keyboard Driver keyboard Option CoreKeyboard Option XkbRules xorg Option XkbModel pc104 Option XkbLayout us EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/psaux Option Protocol ImPS/2 Option Emulate3Buttons true Option ZAxisMapping 4 5 EndSection Section InputDevice Identifier Generic Mouse Driver mouse Option SendCoreEventstrue Option Device/dev/input/mice Option Protocol ImPS/2 Option Emulate3Buttons true Option ZAxisMapping 4 5 EndSection Section Device Identifier Voodoo5 Driver tdfx VideoRam32768 EndSection Section Monitor Identifier DP 710 Option DPMS HorizSync 30-60 VertRefresh 50-75 EndSection Section Screen Identifier Default Screen Device Voodoo5 Monitor DP 710 DefaultDepth16 SubSection Display Depth 1 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 4 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 8 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 15 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 16 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 24 Modes 1024x768 800x600
Bug#358646:
Some more info, I don't know if it helps, but here it is: When the aforementioned behavior is present, upon reboot of the machine, I just noticed that the system clock had reverted to the last time I'd had a clean reboot of the machine. In this case, it had set itself back about 10 hours. -- ...Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#345815: #345815 kmymoney2: default geometry too large for screen
From: Thomas Baumgart [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Debian Bug report logs - #345815 kmymoney2: default geometry too large for screen Date: Wed, 1 Feb 2006 20:59:06 +0100 Please upgrade to 0.8.2. The problem has been fixed there. 0.6.4 will not be maintained anymore. -- Regards Thomas Baumgart Excuse me? You're telling that a package version in Sarge will not be maintained any longer? Is this a Debian policy? Short of using testing/unstable or going to 34rd parties, just how would one upgrade to 0.8.2 when it's not even available in Sarge? -- ...Rob Return address is obfuscated. You can reach me via robslaptop (at) gmail dot com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#345815: kmymoney2: default geometry too large for screen
Package: kmymoney2 Version: 0.6.4-1 Severity: important Using kmymymoney2, the default geometry will not allow the entire window to be on the screen, or allow it to be resized, no matter the screen resolution, rendering it basically unusable without customizing settings. Setting customized fonts to _very_ small settings allow it to finally be visible. -- System Information: Debian Release: 3.1 Architecture: i386 (i586) Kernel: Linux 2.6.8-2-386 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages kmymoney2 depends on: ii kdelibs4 4:3.3.2-6.3 KDE core libraries ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libaudio2 1.7-2 The Network Audio System (NAS). (s ii libc6 2.3.2.ds1-22 GNU C Library: Shared libraries an ii libfam0c1022.7.0-6sarge1 client library to control the FAM ii libfontconfig1 2.3.1-2 generic font configuration library ii libfreetype6 2.1.7-2.4 FreeType 2 font engine, shared lib ii libgcc11:3.4.3-13GCC support library ii libice64.3.0.dfsg.1-14sarge1 Inter-Client Exchange library ii libjpeg62 6b-10 The Independent JPEG Group's JPEG ii libpcre3 4.5-1.2sarge1 Perl 5 Compatible Regular Expressi ii libpng12-0 1.2.8rel-1PNG library - runtime ii libqt3c102-mt 3:3.3.4-3 Qt GUI Library (Threaded runtime v ii libsm6 4.3.0.dfsg.1-14sarge1 X Window System Session Management ii libstdc++5 1:3.3.5-13The GNU Standard C++ Library v3 ii libx11-6 4.3.0.dfsg.1-14sarge1 X Window System protocol client li ii libxcursor11.1.3-1 X cursor management library ii libxext6 4.3.0.dfsg.1-14sarge1 X Window System miscellaneous exte ii libxft22.1.7-1 FreeType-based font drawing librar ii libxml22.6.16-7 GNOME XML library ii libxrandr2 4.3.0.dfsg.1-14sarge1 X Window System Resize, Rotate and ii libxrender10.8.3-7 X Rendering Extension client libra ii libxt6 4.3.0.dfsg.1-14sarge1 X Toolkit Intrinsics ii xlibs 4.3.0.dfsg.1-14sarge1 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-4.sarge.2 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#345640: xserver-xorg 6.9.0.dfsg.1-1 hangs machine
Package: xserver-xorg Version: 6.9.0.dfsg.1-1 Followup-For: Bug #345640 The most recent upgrade of the xorg packages hangs my Sid machine. Screen and keyboard are locked, so I have to ssh in remotely and reboot the machine. My display hardware is as follows: Voodoo 5 AGP video card Mitsubishi Diamond Pro 710 monitor -- Package-specific info: Contents of /var/lib/xfree86/X.roster: xserver-xfree86 xserver-xorg /etc/X11/X target unchanged from checksum in /var/lib/xfree86/X.md5sum. X server symlink status: lrwxrwxrwx 1 root root 17 Jul 13 11:16 /etc/X11/X - /usr/bin/X11/Xorg -rwxr-xr-x 1 root root 1852284 Dec 29 02:38 /usr/bin/X11/Xorg Contents of /var/lib/xfree86/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: :01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 4 / Voodoo 5 (rev 01) /etc/X11/xorg.conf unchanged from checksum in /var/lib/xfree86/xorg.conf.md5sum. Xorg X server configuration file status: -rw-r--r-- 1 root root 3115 Jan 1 2006 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # xorg.conf (Xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type man xorg.conf at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following commands as root: # # cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom # md5sum /etc/X11/xorg.conf /var/lib/xfree86/xorg.conf.md5sum # dpkg-reconfigure xserver-xorg Section Files FontPathunix/:7100# local font server # if the local font server has problems, we can fall back on these FontPath/usr/lib/X11/fonts/misc FontPath/usr/lib/X11/fonts/cyrillic FontPath/usr/lib/X11/fonts/100dpi/:unscaled FontPath/usr/lib/X11/fonts/75dpi/:unscaled FontPath/usr/lib/X11/fonts/Type1 FontPath/usr/lib/X11/fonts/CID FontPath/usr/lib/X11/fonts/100dpi FontPath/usr/lib/X11/fonts/75dpi EndSection Section Module Loadbitmap Loaddbe Loadddc Loaddri Loadextmod Loadfreetype Loadglx Loadint10 Loadrecord Loadtype1 Loadv4l Loadvbe EndSection Section InputDevice Identifier Generic Keyboard Driver keyboard Option CoreKeyboard Option XkbRules xorg Option XkbModel pc104 Option XkbLayout us EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/psaux Option Protocol ImPS/2 Option Emulate3Buttons true Option ZAxisMapping 4 5 EndSection Section InputDevice Identifier Generic Mouse Driver mouse Option SendCoreEventstrue Option Device/dev/input/mice Option Protocol ImPS/2 Option Emulate3Buttons true Option ZAxisMapping 4 5 EndSection Section Device Identifier Voodoo5 Driver tdfx BusID PCI:1:0:0 VideoRam32768 EndSection Section Monitor Identifier DP 710 Option DPMS HorizSync 30-60 VertRefresh 50-75 EndSection Section Screen Identifier Default Screen Device Voodoo5 Monitor DP 710 DefaultDepth16 SubSection Display Depth 1 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 4 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 8 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 15 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 16 Modes 1024x768 800x600 640x480 EndSubSection SubSection Display Depth 24 Modes 1024x768 800x600 640x480 EndSubSection EndSection Section ServerLayout Identifier Default
Bug#340768: bluefish crashes using the spellcheck function
Package: bluefish Version: 1.0.4-1 Severity: normal As subject states, whenever I've tried to use the spellcheck function (menu item or toolbar button) from within bluefish, the spellcheck dialog appears, but when used, bluefish immediately crashes, every time. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.27-halb5 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages bluefish depends on: ii libart-2.0-2 2.3.17-1Library of functions for 2D graphi ii libaspell15 0.60.4-1GNU Aspell spell-checker runtime l ii libatk1.0-0 1.10.3-1The ATK accessibility toolkit ii libbonobo2-0 2.10.1-1Bonobo CORBA interfaces library ii libbonoboui2-0 2.10.1-1The Bonobo UI library ii libc62.3.5-8 GNU C Library: Shared libraries an ii libgconf2-4 2.10.1-6GNOME configuration database syste ii libglib2.0-0 2.8.4-2 The GLib library of C routines ii libgnome2-0 2.10.1-1The GNOME 2 library - runtime file ii libgnomecanvas2-02.10.2-2A powerful object-oriented display ii libgnomeui-0 2.10.1-1The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.10.1-5The GNOME virtual file-system libr ii libgtk2.0-0 2.6.10-2The GTK+ graphical user interface ii libice6 6.8.2.dfsg.1-10 Inter-Client Exchange library ii liborbit21:2.12.4-1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-01.8.2-3 Layout and rendering of internatio ii libpcre3 6.4-1.0.1 Perl 5 Compatible Regular Expressi ii libpopt0 1.7-5 lib for parsing cmdline parameters ii libsm6 6.8.2.dfsg.1-10 X Window System Session Management ii libxml2 2.6.22-2GNOME XML library ii xlibs6.8.2.dfsg.1-10 X Window System client libraries m ii zlib1g 1:1.2.3-8 compression library - runtime bluefish recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]