Bug#980539: linux-image-5.9.0-0.bpo.5-armmp-lpae: [PATCH] sun4i-codec: set card->owner to avoid warnings

[Rob J. Epping]

Package: src:linux
Version: 5.9.15-1~bpo10+1
Severity: normal
Tags: patch

Dear Maintainer,

When I switched from buster kernel (4.19) to buster-backport kernel
(5.9) I started gerring warning messages like
"WARNING: CPU: 1 PID: 371 at sound/core/init.c:207 snd_card_new+0x364/0x390 
[snd]"

These warnings are similar to the report in [1] 

Patching sound/soc/sunxi/sun4i-codec.c in a simmilar way as mentioned in
[1] seems to remove the warning.

[1] 


Can this be fixed for sun4i as wel?

-- Package-specific info:
** Version:
Linux version 5.9.0-0.bpo.5-armmp-lpae (debian-ker...@lists.debian.org) (gcc-8 
(Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP Debian 
5.9.15-1~bpo10+1 (2020-12-31)

** Command line:
console=ttyS0,115200

** Tainted: COE (13312)
 * staging driver was loaded
 * externally-built ("out-of-tree") module was loaded
 * unsigned module was loaded

** Kernel log:
[attached]

** Model information
Hardware: Allwinner sun7i (A20) Family
Revision: 
Device Tree model: Cubietech Cubietruck

** Loaded modules:
binfmt_misc(E)
sun4i_spdif(OE)
nfsd(E)
auth_rpcgss(E)
nfs_acl(E)
nfs(E)
lockd(E)
grace(E)
nfs_ssc(E)
fscache(E)
sunrpc(E)
8021q(E)
garp(E)
mrp(E)
stp(E)
llc(E)
brcmfmac(E)
brcmutil(E)
cfg80211(E)
rfkill(E)
des_generic(E)
evdev(E)
realtek(E)
ecb(E)
dwmac_sunxi(E)
aes_arm(E)
stmmac_platform(E)
stmmac(E)
aes_generic(E)
sun4i_codec(OE)
libaes(E)
snd_soc_simple_card(E)
mdio_xpcs(E)
phylink(E)
cbc(E)
snd_soc_simple_card_utils(E)
snd_soc_spdif_tx(E)
ptp(E)
snd_soc_core(E)
pps_core(E)
snd_pcm_dmaengine(E)
sunxi_cedrus(CE)
lima(E)
snd_pcm(E)
snd_timer(E)
sun4i_backend(E)
gpu_sched(E)
videobuf2_dma_contig(E)
snd(E)
axp20x_usb_power(E)
axp20x_ac_power(E)
axp20x_battery(E)
v4l2_mem2mem(E)
axp20x_adc(E)
axp20x_regulator(E)
industrialio(E)
sunxi(E)
videobuf2_memops(E)
axp20x_pek(E)
sun4i_ts(E)
sun4i_ss(E)
videobuf2_v4l2(E)
sunxi_cir(E)
soundcore(E)
ohci_platform(E)
ehci_platform(E)
phy_generic(E)
nvmem_sunxi_sid(E)
ohci_hcd(E)
pwm_sun4i(E)
musb_hdrc(E)
rc_core(E)
videobuf2_common(E)
ehci_hcd(E)
sun4i_drm(E)
sun4i_drm_hdmi(E)
udc_core(E)
sunxi_mmc(E)
sun4i_frontend(E)
cec(E)
usbcore(E)
sunxi_wdt(E)
libdes(E)
sun4i_tcon(E)
sg(E)
sun8i_tcon_top(E)
drm_kms_helper(E)
display_connector(E)
drm(E)
leds_gpio(E)
cpufreq_dt(E)
ext4(E)
crc16(E)
mbcache(E)
jbd2(E)
crc32c_generic(E)
sd_mod(E)
t10_pi(E)
crc_t10dif(E)
crct10dif_generic(E)
crct10dif_common(E)
pinctrl_axp209(E)
ahci_sunxi(E)
libahci_platform(E)
libahci(E)
libata(E)
i2c_mv64xxx(E)
scsi_mod(E)
phy_sun4i_usb(E)

** PCI devices:

** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 10.7
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: armhf (armv7l)

Kernel: Linux 5.9.0-0.bpo.5-armmp-lpae (SMP w/2 CPU cores)
Kernel taint flags: TAINT_CRAP, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=C, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE=C (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)

Versions of packages linux-image-5.9.0-0.bpo.5-armmp-lpae depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.133+deb10u1
ii  kmod26-1
ii  linux-base  4.6

Versions of packages linux-image-5.9.0-0.bpo.5-armmp-lpae recommends:
pn  apparmor 
ii  firmware-linux-free  3.4

Versions of packages linux-image-5.9.0-0.bpo.5-armmp-lpae suggests:
pn  debian-kernel-handbook  
pn  linux-doc-5.9   

Versions of packages linux-image-5.9.0-0.bpo.5-armmp-lpae is related to:
pn  firmware-amd-graphics 
pn  firmware-atheros  
pn  firmware-bnx2 
pn  firmware-bnx2x
ii  firmware-brcm8021120200918-1~bpo10+1
pn  firmware-cavium   
pn  firmware-intel-sound  
pn  firmware-intelwimax   
pn  firmware-ipw2x00  
pn  firmware-ivtv 
pn  firmware-iwlwifi  
pn  firmware-libertas 
pn  firmware-linux-nonfree
pn  firmware-misc-nonfree 
pn  firmware-myricom  
pn  firmware-netxen   
pn  firmware-qlogic   
pn  firmware-realtek  
pn  firmware-samsung  
pn  firmware-siano
pn  firmware-ti-connectivity  
pn  xen-hypervisor

-- no debconf information
Jan 19 12:52:30 cubietruck kernel: [   14.040270] [ cut here 
]
Jan 19 12:52:30 cubietruck kernel: [   14.040327] WARNING: CPU: 1 PID: 371 at 
sound/core/init.c:207 snd_card_new+0x364/0x390 [snd]
Jan 19 12:52:30 cubietruck kernel: [   14.040330] Modules linked in: 
sun4i_codec(E+) 

Bug#960870: linux-image-armmp: please add patch to support fancontrol on Helios4

[Rob J. Epping]

Package: linux-image-armmp
Version: 5.5.17-1~bpo10+1
Severity: wishlist

Dear Maintainer,

Please add support for Helios4 fancontrol.

According to helios4 wiki [1] this needs a patch to the kernel because
> Currently Linux gpio-mvebu driver does not allow more than 1 PWM
> under the same gpio bank. 

In the same page the required patch was linked from Armbian.
The current link is either [2] or [3]. Neither does apply cleanly
to 5.5.17 though :(

THNX && GRTNX,
RobJE

[1] 
[2] 
[3] 

-- System Information:
Debian Release: 10.4
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: armhf (armv7l)

Kernel: Linux 5.5.0-0.bpo.2-armmp (SMP w/2 CPU cores)
Kernel taint flags: TAINT_UNSIGNED_MODULE
Locale: LANG=C, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE=C (charmap=UTF-8)
Shell: /bin/sh linked to /usr/bin/dash
Init: sysvinit (via /sbin/init)

Versions of packages linux-image-armmp depends on:
ii  linux-image-5.5.0-0.bpo.2-armmp  5.5.17-1~bpo10+1

linux-image-armmp recommends no packages.

linux-image-armmp suggests no packages.

-- no debconf information

Bug#960524: Please provide a startup script for installations not using systemd

[Rob J. Epping]

Package: zram-tools
Version: 0.3.2.1-1
Severity: normal

Dear Maintainer,

Debian allows for other init systems as well, please provide startup
scripts for these too.

Looking at the script /usr/sbin/zramswap, a quick solution could be to
move this script to /ets/init.d

THNX && GRTNX,
RobJE

-- System Information:
Debian Release: 10.3
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.19.0-8-amd64 (SMP w/2 CPU cores)
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE=C.UTF-8 
(charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: sysvinit (via /sbin/init)
LSM: AppArmor: enabled

Versions of packages zram-tools depends on:
ii  bc  1.07.1-2+b1

zram-tools recommends no packages.

zram-tools suggests no packages.

-- no debconf information

Bug#946869: u-boot: please add support for Helios4 NAS

[Rob J. Epping]

Package: u-boot
Severity: wishlist

Dear Maintainer,

Support for the Helios4 NAS is available in u-boot 2019.01+dfsg-1, which
is the version in buster.

The version I've cross-compiled with a modified debian/targets works
flawlessly with Debian installed sd-card images.

A line similar to this will enable Helios4 u-boot.
-->8--
armhf   mvebu   helios4 u-boot-spl.kwb
--8<--

THNX && GRTNX,
RobJE



signature.asc
Description: OpenPGP digital signature

Bug#919206: please apply upstream fix from pull #11417

[Rob J. Epping]

As the subject says.

The patch in [1] is simple and solves the issue also in the current version.

[1] 

Would be great when it could be applied on a next update of 240

GRTNX,
RobJE

Bug#839695: 67 X11/GTK related packages on a headless server

[Rob J. Epping]

Hi

On 01/23/2017 09:31 AM, Michael Tokarev wrote:
> 23.01.2017 10:55, Rob J. Epping wrote:
>> Hi,
>>
>> qemu 1:2.8+dfsg-1 has hit jessie-backorts.
>>
>> With the fix for bug #839695 my server now wants to install 67 X11/GTK
>> related new packages. This is on a headless server where this is just
>> more atack surface, i.e. less security.
>>
>> Would it be possible to make the X11/GTK stuff optional? Maybe by
>> creating 2 binary versions for example a -gtk and a -nox version.
> 
> Please see #813658 .
> 
> In brief, being a 20+ years paranoic sysadmin myself, I don't see it
> being a security treat. Either we fix all needed X client libs to
> not depend on X itself (ie, being split into a headless and headful
> part), or we live with this.
> 
> People want features even on a headless server (eg, 3d support via
> spice), -- this will bring half of X anyway. So making just display
> optional doesn't work.

Let me be the voice of other people who do not need any graphical stuff.
For me personally, I only run headless virtual machines on a headless
server and do not want to install all the additional libraries.

As an example, some people want vim with GTK support and some don't.
So there is a bunch of vim packages available.

I guess what I want put forward is that I like to have a choice here,
similar to vim-nox and vim-gtk.

> Thanks,
> 
> /mjt

THNX && GRTNX,
RobJE





signature.asc
Description: OpenPGP digital signature

Bug#839695: 67 X11/GTK related packages on a headless server

[Rob J. Epping]

Hi,

qemu 1:2.8+dfsg-1 has hit jessie-backorts.

With the fix for bug #839695 my server now wants to install 67 X11/GTK
related new packages. This is on a headless server where this is just
more atack surface, i.e. less security.

Would it be possible to make the X11/GTK stuff optional? Maybe by
creating 2 binary versions for example a -gtk and a -nox version.

GRTNX,
RobJE

Bug#789083: mtr_0.85.orig.tar.gz contains .o files

[Rob J. Epping]

Source: mtr
Severity: minor

mtr_0.85.orig.tar.gz contains .o files for almost all .c files.

epping@breis:~/src/mtr-0.85$ file *.o
asn.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
curses.o:  ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
display.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
dns.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
getopt1.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
getopt.o:  ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
gtk.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
mtr.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
net.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
raw.o: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
report.o:  ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
select.o:  ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
split.o:   ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), not stripped
epping@breis:~/src/mtr-0.85$


-- System Information:
Debian Release: 8.1
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable'), (450, 
'testing-updates'), (450, 'testing')
Architecture: armel (armv5tel)

Kernel: Linux 3.16.0-4-kirkwood
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#735254: flash-kernel: QNAP TS-212 doesn't boot with 3.12-1-kirkwood and flash-kernel 3.12

[Rob J. Epping]

Package: src:linux
Followup-For: Bug #735254

I can confirm this issue on a TS-219.
Adding DTB-Append-From: 3.12 and DTB-Id: kirkwood-ts219-6281.dtb in the 
apropriate place in all.db solves the issue parially and maybe only for a 
TS-219 (with Soc: 88F6281)

reflashing with kernel 3.12 fails because machine name has changed in 
device-tree.

GRTNX,
RobJE

-- Package-specific info:
** Version:
Linux version 3.12-0.bpo.1-kirkwood (debian-ker...@lists.debian.org) (gcc 
version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.12.6-2~bpo70+1 (2014-01-07)

** Command line:
console=ttyS0,115200 root=/dev/ram initrd=0xa0,0x90 ramdisk=32768

** Not tainted

** Kernel log:
[3.900913] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 
TB/931 GiB)
[3.909162] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 
TB/931 GiB)
[3.918222] sd 1:0:0:0: [sdb] Write Protect is off
[3.923062] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[3.923080] sd 0:0:0:0: [sda] Write Protect is off
[3.927907] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[3.928101] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[3.937219] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[3.979606]  sdb: sdb1 sdb2
[3.983167]  sda: sda1 sda2
[3.988464] sd 1:0:0:0: [sdb] Attached SCSI disk
[3.993485] sd 0:0:0:0: [sda] Attached SCSI disk
[4.376216] md: md0 stopped.
[4.389290] md: bindsdb1
[4.400689] md: bindsda1
[4.424002] md: raid1 personality registered for level 1
[4.430355] md/raid1:md0: active with 2 out of 2 mirrors
[4.435839] md0: detected capacity change from 0 to 999692173312
[4.442193] RAID1 conf printout:
[4.442204]  --- wd:2 rd:2
[4.442213]  disk 0, wo:0, o:1, dev:sda1
[4.442221]  disk 1, wo:0, o:1, dev:sdb1
[4.455950]  md0: unknown partition table
[4.479595] device-mapper: uevent: version 1.0.3
[4.487015] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: 
dm-de...@redhat.com
[4.591082] bio: create slab bio-1 at 1
[4.769140] EXT4-fs (dm-0): mounting ext3 file system using the ext4 
subsystem
[4.790586] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: 
(null)
[6.614941] udevd[308]: starting version 175
[6.788375] input: gpio_keys.3 as /devices/gpio_keys.3/input/input0
[7.048864] orion_wdt: Initial timeout 21 sec
[7.145097] usbcore: registered new interface driver usbfs
[7.201410] usbcore: registered new interface driver hub
[7.238630] usbcore: registered new device driver usb
[7.296547] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[7.368172] ehci-orion: EHCI orion driver
[7.488089] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[7.525959] libphy: orion_mdio_bus: probed
[7.531214] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests 
probe deferral
[8.113648] orion-ehci f105.ehci: EHCI Host Controller
[8.640122] orion-ehci f105.ehci: new USB bus registered, assigned bus 
number 1
[8.675746] orion-ehci f105.ehci: irq 24, io mem 0xf105
[8.714355] orion-ehci f105.ehci: USB 2.0 started, EHCI 1.00
[8.724536] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[8.731476] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[8.738764] usb usb1: Product: EHCI Host Controller
[8.743676] usb usb1: Manufacturer: Linux 3.12-0.bpo.1-kirkwood ehci_hcd
[8.750423] usb usb1: SerialNumber: f105.ehci
[8.765609] hub 1-0:1.0: USB hub found
[8.781263] hub 1-0:1.0: 1 port detected
[8.881220] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC 
address 00:08:9b:8c:76:74
[9.113277] usb 1-1: new high-speed USB device number 2 using orion-ehci
[9.262757] usb 1-1: New USB device found, idVendor=058f, idProduct=6254
[9.269532] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[9.294392] hub 1-1:1.0: USB hub found
[9.306943] hub 1-1:1.0: 4 ports detected
[   10.155923] Adding 498008k swap on /dev/sda2.  Priority:-1 extents:1 
across:498008k 
[   10.201882] Adding 498008k swap on /dev/sdb2.  Priority:-2 extents:1 
across:498008k 
[   10.237460] EXT4-fs (dm-0): re-mounted. Opts: (null)
[   10.575063] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   10.925312] loop: module loaded
[   18.978766] EXT4-fs (dm-1): mounting ext3 file system using the ext4 
subsystem
[   19.033688] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: 
(null)
[   19.059890] EXT4-fs (dm-2): mounting ext3 file system using the ext4 
subsystem
[   19.117530] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: 
(null)
[   19.145071] EXT4-fs (dm-7): mounting ext3 file system using the ext4 
subsystem
[   19.175291] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: 
(null)
[   19.199526] EXT4-fs (dm-6): mounting ext3 file 

Bug#703101: missing /usr/share/javascript/jquery-ui/themes/base/images/ui-anim_basic_16x16.gif

[Rob J. Epping]

Package: libjs-jquery-ui
Version: 1.8.ooops.21+dfsg-2
Severity: normal

After upgrade from squeeze to wheezy the ui-anim_basic_16x16.gif is missing.

Please re-add, THNX

-- System Information:
Debian Release: 7.0
  APT prefers testing-updates
  APT policy: (500, 'testing-updates'), (500, 'testing'), (400, 
'testing-proposed-updates')
Architecture: armel (armv5tel)

Kernel: Linux 3.2.0-4-kirkwood
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages libjs-jquery-ui depends on:
ii  libjs-jquery  1.7.2+dfsg-1

Versions of packages libjs-jquery-ui recommends:
ii  javascript-common  7

Versions of packages libjs-jquery-ui suggests:
ii  libjs-jquery-ui-docs  1.8.ooops.21+dfsg-2

-- no debconf information


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#612366: rancid 2.3.6 is available.

[Rob J. Epping]

Package: rancid
Severity: wishlist

Hi

I updated my rancid system to squeeze today and found that rancid
2.3.3 has major issues with HP Procurve devices and minor issues with
fortigate and mrv devices.
I found that rancid 2.3.6 is available from shrubbery.

I downloaded the tar and patched it with the 2.3.3.-1.diff.gz.
After that only the following small changes where needed to build 2.3.6 .deb's:
* 2.3.6 has xrrancid so 10_iosxr.dpatch can be removed
* as xrrancid is included manpage router.db.5 mentiones it ie small
update of 05_man_fixup.dpatch
* nrancid ---more--- prompt has been fixed in 2.3.6 so
07_nrancid_bs_paging.dpatch can be stripped to +   1 while
s/[^[:cntrl:]]\cH//g;

After building this version all my problems are gone.
Please package 2.3.6 for Debian.

THNX!
-- 
GRTNX,
RobJE



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#522583: Bug #522583: fping broken on some arm systems?

[Rob J. Epping]

Hi,

 epp...@qnap:~$ dpkg -s fping | grep Version
 Version: 2.4b2-to-ipv6-15

 Please note that you initially reported this with -16, and the other
 report happened with -16.1. I believe -16 fixed much in this area,
 so reports about -15 aren't unfortunately very useful.

 As I said earlier, -16.1 can be installed on a lenny system without any
 dependency problems, and that's what the other reporter did.

 No other broken system reported yet with -16.1 AFAICS. Still weird.

installed -16.1 (I was to fast yesterday) and the problem has gone.

epp...@qnap:~$ dpkg -s fping | grep Version
Version: 2.4b2-to-ipv6-16.1
epp...@qnap:~$ fping -C 5 localhost
localhost : [0], 84 bytes, 0.15 ms (0.15 avg, 0% loss)
localhost : [1], 84 bytes, 0.10 ms (0.12 avg, 0% loss)
localhost : [2], 84 bytes, 0.10 ms (0.11 avg, 0% loss)
localhost : [3], 84 bytes, 0.10 ms (0.11 avg, 0% loss)
localhost : [4], 84 bytes, 0.10 ms (0.11 avg, 0% loss)

localhost : 0.15 0.10 0.10 0.10 0.10
epp...@qnap:~$ fping -ei 1000 -c 10 194.109.5.227
194.109.5.227 : [0], 84 bytes, 20.7 ms (20.7 avg, 0% loss)
194.109.5.227 : [1], 84 bytes, 21.0 ms (20.8 avg, 0% loss)
194.109.5.227 : [2], 84 bytes, 47.0 ms (29.6 avg, 0% loss)
194.109.5.227 : [3], 84 bytes, 19.9 ms (27.1 avg, 0% loss)
194.109.5.227 : [4], 84 bytes, 20.4 ms (25.8 avg, 0% loss)
194.109.5.227 : [5], 84 bytes, 20.0 ms (24.8 avg, 0% loss)
194.109.5.227 : [6], 84 bytes, 19.5 ms (24.1 avg, 0% loss)
194.109.5.227 : [7], 84 bytes, 20.8 ms (23.6 avg, 0% loss)
194.109.5.227 : [8], 84 bytes, 20.3 ms (23.3 avg, 0% loss)
194.109.5.227 : [9], 84 bytes, 20.9 ms (23.0 avg, 0% loss)

194.109.5.227 : xmt/rcv/%loss = 10/10/0%, min/avg/max = 19.5/23.0/47.0
epp...@qnap:~$

 Thanks everybody,
 --
 Niko Tyni   nt...@debian.org

THNX 2U2!
-- 
GRTNX,
RobJE



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#522583: Bug #522583: fping broken on some arm systems?

[Rob J. Epping]

Hi

 Could a few armel users please install fping 2.4b2-to-ipv6-16.1 from
 squeeze or sid (it's also installable on a plain lenny system) and report
 back (either privately to me or to 522...@bugs.debian.org) if they see
 things like

As initial reporter of 522583 I tested again on my QNAP TS-219 with
the same strange results.

epp...@qnap:~$ uname -a
Linux QNAP 2.6.32-bpo.5-kirkwood #1 Thu Oct 28 07:00:55 UTC 2010
armv5tel GNU/Linux
epp...@qnap:~$ cat /etc/debian_version
5.0.6
epp...@qnap:~$ cat /proc/cpuinfo
Processor   : Feroceon 88FR131 rev 1 (v5l)
BogoMIPS: 1199.30
Features: swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant : 0x2
CPU part: 0x131
CPU revision: 1

Hardware: QNAP TS-119/TS-219
Revision: 
Serial  : 
epp...@qnap:~$ dpkg -s fping | grep Version
Version: 2.4b2-to-ipv6-15
epp...@qnap:~$ fping -C 5 localhost
localhost : [0], 84 bytes, 1998895 ms (1998895 avg, 0% loss)
localhost : [1], 84 bytes, 386800 ms (1192847 avg, 0% loss)
localhost : [2], 84 bytes, 0.-132287685 ms (354273 avg, 0% loss)
localhost : [3], 84 bytes, 1415240 ms (619515 avg, 0% loss)
localhost : [4], 84 bytes, 0.-19082523 ms (457446 avg, 0% loss)

localhost : 1998895.68 386800.20 - 1415240.99 -
epp...@qnap:~$

 and/or the reported nonsense duplicate lines like

  # fping -ei 1000 -c 10 194.109.5.227
  194.109.5.227 : [0], 84 bytes, 0.-182238712 ms (0.-182238712 avg, 0% loss)
  194.109.5.227 : duplicate for [16777217], 84 bytes, 969531 ms
  194.109.5.227 : [16777217], 84 bytes, 969531 ms (0.-42642786 avg, 0% loss)
  194.109.5.227 : duplicate for [33554434], 84 bytes, 0.-79624590 ms

Also note the weird (negative(?)) response times

Was planning on mail this list too, but you beat me to it Niko. THNX!
-- 
GRTNX,
RobJE



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#522583: bad reponse on armel

[Rob J. Epping]

Package: fping
Version: 2.4b2-to-ipv6-16
Severity: grave

I think the screendumps below are clear.

epp...@qnap:~$ uname -m
armv5tel
epp...@qnap:~$ /usr/bin/fping -ei 1000 -c 10 194.109.5.227
194.109.5.227 : [0], 84 bytes, 0.-182238712 ms (0.-182238712 avg, 0% loss)
194.109.5.227 : duplicate for [16777217], 84 bytes, 969531 ms
194.109.5.227 : [16777217], 84 bytes, 969531 ms (0.-42642786 avg, 0% loss)
194.109.5.227 : duplicate for [33554434], 84 bytes, 0.-79624590 ms
194.109.5.227 : [33554434], 84 bytes, 0.-79624590 ms (0.-54970054 avg, 0% loss)
194.109.5.227 : duplicate for [50331651], 84 bytes, 1718334 ms
194.109.5.227 : [50331651], 84 bytes, 1718334 ms (17308 avg, 0% loss)
194.109.5.227 : duplicate for [67108868], 84 bytes, 0.-3309057 ms
194.109.5.227 : [67108868], 84 bytes, 0.-3309057 ms (7228 avg, 0% loss)
194.109.5.227 : duplicate for [83886085], 84 bytes, 0.-179879735 ms
194.109.5.227 : [83886085], 84 bytes, 0.-179879735 ms (0.-29377584 avg, 0% loss)
194.109.5.227 : duplicate for [100663302], 84 bytes, 730261 ms
194.109.5.227 : [100663302], 84 bytes, 730261 ms (0.-14748482 avg, 0% loss)
194.109.5.227 : duplicate for [117440519], 84 bytes, 0.-103557650 ms
194.109.5.227 : [117440519], 84 bytes, 0.-103557650 ms (0.-25849628 avg, 0% 
loss)
194.109.5.227 : duplicate for [134217736], 84 bytes, 1493547 ms
194.109.5.227 : [134217736], 84 bytes, 1493547 ms (0.-6382475 avg, 0% loss)
194.109.5.227 : duplicate for [150994953], 84 bytes, 0.-27229045 ms
194.109.5.227 : [150994953], 84 bytes, 0.-27229045 ms (0.-8467132 avg, 0% loss)

194.109.5.227 : xmt/rcv/%loss = 10/10/0%, min/avg/max = 
0.-182238712/0.-8467132/1718334
epp...@qnap:~$ 


epp...@robje:~$ uname -m
i686
epp...@robje:~$ /usr/bin/fping -ei 1000 -c 10 194.109.5.227
194.109.5.227 : [0], 84 bytes, 15.8 ms (15.8 avg, 0% loss)
194.109.5.227 : [1], 84 bytes, 14.5 ms (15.2 avg, 0% loss)
194.109.5.227 : [2], 84 bytes, 13.4 ms (14.6 avg, 0% loss)
194.109.5.227 : [3], 84 bytes, 13.2 ms (14.2 avg, 0% loss)
194.109.5.227 : [4], 84 bytes, 12.5 ms (13.9 avg, 0% loss)
194.109.5.227 : [5], 84 bytes, 14.5 ms (14.0 avg, 0% loss)
194.109.5.227 : [6], 84 bytes, 11.9 ms (13.7 avg, 0% loss)
194.109.5.227 : [7], 84 bytes, 11.2 ms (13.4 avg, 0% loss)
194.109.5.227 : [8], 84 bytes, 9.67 ms (13.0 avg, 0% loss)
194.109.5.227 : [9], 84 bytes, 9.31 ms (12.6 avg, 0% loss)

194.109.5.227 : xmt/rcv/%loss = 10/10/0%, min/avg/max = 9.31/12.6/15.8
epp...@robje:~$ 


-- System Information:
Debian Release: 5.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: armel (armv5tel)

Kernel: Linux 2.6.26-1-orion5x
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages fping depends on:
ii  libc6 2.7-18 GNU C Library: Shared libraries

fping recommends no packages.

fping suggests no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#491198: typo in /etc/cron.daily/webalizer

[Rob J. Epping]

Package: webalizer
Version: 2.01.10-32
Severity: minor

--- webalizer.orig  2007-01-21 20:36:17.0 +
+++ webalizer   2008-07-17 15:09:50.075938264 +
@@ -4,7 +4,7 @@
 # Remco van de Meent [EMAIL PROTECTED]
 # and now, all rewrited by Jose Carlos Medeiros [EMAIL PROTECTED]

-# This script just run webalizer agains all .conf files in /etc/webalizer 
directory
+# This script just run webalizer against all .conf files in /etc/webalizer 
directory

 WEBALIZER=/usr/bin/webalizer
 WEBALIZER_CONFDIR=/etc/webalizer


-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable'), (300, 'testing')
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-6-amd64
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)

Versions of packages webalizer depends on:
ii  debconf [debconf-2.0]  1.5.11etch1   Debian configuration management sy
ii  libc6  2.3.6.ds1-13etch5 GNU C Library: Shared libraries
ii  libdb4.2   4.2.52+dfsg-2 Berkeley v4.2 Database Libraries [
ii  libgd2-xpm 2.0.33-5.2GD Graphics Library version 2
ii  libgeoip1  1.3.17-1.1A non-DNS IP-to-country resolver l
ii  libpng12-0 1.2.15~beta5-1PNG library - runtime
ii  zlib1g 1:1.2.3-13compression library - runtime

webalizer recommends no packages.

-- debconf information excluded



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#491200: webalizer 2.20-01 released

[Rob J. Epping]

Package: webalizer
Version: 2.01.10-32
Severity: wishlist

New version available on http://www.mrunix.net/webalizer/

July 12, 2008   Version 2.20-01 has been released

-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable'), (300, 'testing')
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-6-amd64
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)

Versions of packages webalizer depends on:
ii  debconf [debconf-2.0]  1.5.11etch1   Debian configuration management sy
ii  libc6  2.3.6.ds1-13etch5 GNU C Library: Shared libraries
ii  libdb4.2   4.2.52+dfsg-2 Berkeley v4.2 Database Libraries [
ii  libgd2-xpm 2.0.33-5.2GD Graphics Library version 2
ii  libgeoip1  1.3.17-1.1A non-DNS IP-to-country resolver l
ii  libpng12-0 1.2.15~beta5-1PNG library - runtime
ii  zlib1g 1:1.2.3-13compression library - runtime

webalizer recommends no packages.

-- debconf information excluded



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#423543: util-linux: /etc/init.d/hwclockfirst.sh not removed on upgrade from sarge to etch

[Rob J. Epping]

Package: util-linux
Version: 2.12r-19
Severity: normal

On sarge the util-linux package contains /etc/init.d/hwclockfirst.sh.
This script is completely gone on etch (according to
packages.debian.org), but is not removed on upgrade.

-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (990, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/dash
Kernel: Linux 2.6.18-4-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages util-linux depends on:
ii  libc62.3.6.ds1-13GNU C Library: Shared libraries
ii  libncurs 5.5-5   Shared libraries for terminal hand
ii  libslang 2.0.6-4 The S-Lang programming library - r
ii  libuuid1 1.39+1.40-WIP-2006.11.14+dfsg-2 universally unique id library
ii  lsb-base 3.1-23.1Linux Standard Base 3.1 init scrip
ii  tzdata   2007b-1 Time Zone and Daylight Saving Time
ii  zlib1g   1:1.2.3-13  compression library - runtime

util-linux recommends no packages.

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]

Bug#394128: libc6-dev: Typo in gnu/stubs.h

[Rob J. Epping]

Package: libc6-dev
Version: 2.3.2.ds1-22sarge4
Severity: normal

makedepend reports:
makedepend: warning:  /usr/include/gnu/stubs.h:
non-portable whitespace encountered at line 7

This is probably a type, here is a patch.

--- /usr/include/gnu/stubs.h.orig   2006-08-14 10:21:57.0 +
+++ /usr/include/gnu/stubs.h2006-10-19 14:46:27.447243271 +
@@ -4,7 +4,7 @@
every time called, usually setting errno to ENOSYS.  */

 #ifdef _LIBC
- #error Applications may not define the macro _LIBC
+# error Applications may not define the macro _LIBC
 #endif

 #define __stub___kernel_cosl

GRTNX,
RobJE

-- System Information:
Debian Release: 3.1
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.16-2-em64t-p4-smp
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)

Versions of packages libc6-dev depends on:
ii  libc62.3.2.ds1-22sarge4  GNU C Library: Shared libraries an
ii  linux-kernel-headers 2.5.999-test7-bk-17 Linux Kernel Headers for developme

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]