Bug#832632: efibootmgr: incorrectly identifies stub file grubx64.efi
Package: efibootmgr Version: 0.11.0-3 Severity: important Dear Maintainer, When rebuilding a replaced disk drive, attempting to make grub work, I observed that efibootmgr was incorrectly creating a boot entry apt-get --reinstall install grub-efi-amd64 created an entry for debian, but it was not tagged as 'active' in the efibootmgr list trying efibootmgr -c -d /dev/sdX --part 1 gave an entry labelled "RedHat Boot Manager" and listed its efi stub as FILE(\EFI\Redhat\grub.efi) where no such directory or file existed. The system was not bootable directly, without resorting to workarounds: (1) booting efi shell and manually invoking EFI\debian\grubx64.efi or (2) mkdir /boot/efi/EFI/redhat && cp /boot/efi/EFI/debian/grubx64.efi /boot/efi/EFI/redhat/grub.efi using the workarounds, the system would boot. using efibootmgr -a -b to try to tag the debian entry as active initially labelled it as active, but after reboot, it was labelled inactive using efibootmgr -o to try to change the boot order initially listed the desired order, but after boot, the boot order had changed. system: AMI Bios 5.6 Supermicro X10DRU-i+ board. -- System Information: Debian Release: 8.5 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.16.0-4-amd64 (SMP w/40 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages efibootmgr depends on: ii libc6 2.19-18+deb8u4 ii libefivar0 0.15-3 ii libpci3 1:3.2.1-3 ii zlib1g 1:1.2.8.dfsg-2+b1 efibootmgr recommends no packages. -- no debconf information
Bug#813539: tails-installer: tails installer fails to sense usb stick
Package: tails-installer Version: 4.4.6+dfsg-1~bpo8+1 Severity: normal Dear Maintainer, in trying to use the gui, the usb stick was never displayed. I did run the installer from command line: /usr/lib/tails-installer/tails-installer -v -f /dev/sdb ** (tails-installer:26025): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-6iecs4mxTn: Connection refused [creator.py:689 (detect_supported_drives)] DEBUG: {} the usb stick is seen by the kernel: Bus 006 Device 007: ID 0951:1607 Kingston Technology DataTraveler 100 and it had a test partition: parted /dev/sdb print Model: Kingston DataTraveler 2.0 (scsi) Disk /dev/sdb: 4010MB Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags: Number Start End SizeType File system Flags 1 1049kB 4010MB 4009MB primary ext2 -- System Information: Debian Release: 8.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages tails-installer depends on: ii gdisk 0.8.10-2 ii genisoimage9:1.1.11-3 ii gir1.2-glib-2.01.42.0-2.2 ii gir1.2-gtk-3.0 3.14.5-1+deb8u1 ii gir1.2-udisks-2.0 2.1.3-5 ii mtools 4.0.18-2 ii p7zip-full 9.20.1~dfsg.1-4.1+deb8u1 ii policykit-10.105-8 ii python 2.7.9-1 ii python-configobj 5.0.6-1 ii python-gi 3.14.0-1 ii python-urlgrabber 3.9.1-4.1 ii syslinux 3:6.03+dfsg-5+deb8u1 tails-installer recommends no packages. tails-installer suggests no packages. -- no debconf information
Bug#813537: tails-installer: tails installer fails with extlinux error
Package: tails-installer Version: 4.4.6+dfsg-1~bpo8+1 Severity: normal Dear Maintainer, In attempting to run tails installer an error message about missing extlinux was encountered. It is true that this package was not installed on the system. I did not find a "depends" of extlinux package in the "control" file. Perhaps extlinux should be required? -- System Information: Debian Release: 8.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages tails-installer depends on: ii gdisk 0.8.10-2 ii genisoimage9:1.1.11-3 ii gir1.2-glib-2.01.42.0-2.2 ii gir1.2-gtk-3.0 3.14.5-1+deb8u1 ii gir1.2-udisks-2.0 2.1.3-5 ii mtools 4.0.18-2 ii p7zip-full 9.20.1~dfsg.1-4.1+deb8u1 ii policykit-10.105-8 ii python 2.7.9-1 ii python-configobj 5.0.6-1 ii python-gi 3.14.0-1 ii python-urlgrabber 3.9.1-4.1 ii syslinux 3:6.03+dfsg-5+deb8u1 tails-installer recommends no packages. tails-installer suggests no packages. -- no debconf information
Bug#657387: approx: resets cache permissions on files to 0000
Package: approx Version: 5.1-1 Severity: important Dear Maintainer, Queries by hosts to apt-get update led to change of permissions of files in /var/cache/approx to - and failure on the clients. chmod of all files under /var/cache/approx to 0775, and then re-query with apt-get update led to apporx changing files back to and client gets error message 500 Internal Server Error Chmod'ing files to 0755 led repeatedly back to -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-vserver-686 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/dash Versions of packages approx depends on: ii adduser 3.113 ii curl 7.23.1-3 ii debconf [debconf-2.0] 1.5.41 ii libc6 2.13-24 ii libpcre3 8.12-4 ii openbsd-inetd [inet-superserver] 0.20091229-1 ii update-inetd 4.41 approx recommends no packages. Versions of packages approx suggests: pn libconfig-model-approx-perl none -- Configuration Files: /etc/approx/approx.conf changed [not included] -- debconf information: approx/port: -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#537387: apache2-mpm-prefork: DSO module pubcookie no longer compatible
Package: apache2-mpm-prefork Version: 2.2.11-6 Severity: normal In pervious versions of apache2, mod_pubcookie.so (http://pubcookie.org/), (source at http://pubcookie.org/downloads/pubcookie-3.3.3.tar.gz ) would compile and load. In v 2.2.11-6, pubcookie compiles, but load fails. apache2ctl configtest output gives: apache2: Syntax error on line 185 of /etc/apache2/apache2.conf: Syntax error on line 1 of /etc/apache2/mods-enabled/pubcookie.load: Cannot load /usr/lib/apache2/modules/mod_pubcookie.so into server: /usr/lib/apache2/modules/mod_pubcookie.so: undefined symbol: EVP_DigestInit Mailing list archives, such as: http://mailman2.u.washington.edu/pipermail/pubcookie-users/2006-September/001554.html suggest looking at the output of ldd /usr/sbin/apache2 compare the result for lenny (2.2.9) vs squeeze/sid (2.2.11) lenny:/# ldd /usr/sbin/apache2 linux-gate.so.1 = (0xe000) libpcre.so.3 = /usr/lib/libpcre.so.3 (0xb7fad000) libaprutil-1.so.0 = /usr/lib/libaprutil-1.so.0 (0xb7f8f000) libapr-1.so.0 = /usr/lib/libapr-1.so.0 (0xb7f63000) libpthread.so.0 = /lib/libpthread.so.0 (0xb7f4b000) libc.so.6 = /lib/libc.so.6 (0xb7e0d000) libldap_r-2.4.so.2 = /usr/lib/libldap_r-2.4.so.2 (0xb7dca000) liblber-2.4.so.2 = /usr/lib/liblber-2.4.so.2 (0xb7dbd000) libdb-4.6.so = /usr/lib/libdb-4.6.so (0xb7c8a000) libpq.so.5 = /usr/lib/libpq.so.5 (0xb7c6a000) libmysqlclient_r.so.15 = /usr/lib/libmysqlclient_r.so.15 (0xb7a7f000) libsqlite3.so.0 = /usr/lib/libsqlite3.so.0 (0xb7a1) libexpat.so.1 = /usr/lib/libexpat.so.1 (0xb79ea000) libuuid.so.1 = /lib/libuuid.so.1 (0xb79e6000) librt.so.1 = /lib/librt.so.1 (0xb79dd000) libcrypt.so.1 = /lib/libcrypt.so.1 (0xb79aa000) libdl.so.2 = /lib/libdl.so.2 (0xb79a6000) /lib/ld-linux.so.2 (0xb7fdd000) libresolv.so.2 = /lib/libresolv.so.2 (0xb7993000) libsasl2.so.2 = /usr/lib/libsasl2.so.2 (0xb797c000) libgnutls.so.26 = /usr/lib/libgnutls.so.26 (0xb78df000) libssl.so.0.9.8 = /usr/lib/i686/cmov/libssl.so.0.9.8 (0xb7898000) libcrypto.so.0.9.8 = /usr/lib/i686/cmov/libcrypto.so.0.9.8 (0xb7745000) libkrb5.so.3 = /usr/lib/libkrb5.so.3 (0xb76b1000) libcom_err.so.2 = /lib/libcom_err.so.2 (0xb76ae000) libgssapi_krb5.so.2 = /usr/lib/libgssapi_krb5.so.2 (0xb7684000) libnsl.so.1 = /lib/libnsl.so.1 (0xb766c000) libm.so.6 = /lib/libm.so.6 (0xb7646000) libz.so.1 = /usr/lib/libz.so.1 (0xb7631000) libtasn1.so.3 = /usr/lib/libtasn1.so.3 (0xb7621000) libgpg-error.so.0 = /usr/lib/libgpg-error.so.0 (0xb761d000) libgcrypt.so.11 = /usr/lib/libgcrypt.so.11 (0xb75b4000) libk5crypto.so.3 = /usr/lib/libk5crypto.so.3 (0xb759) libkrb5support.so.0 = /usr/lib/libkrb5support.so.0 (0xb7588000) libkeyutils.so.1 = /lib/libkeyutils.so.1 (0xb7585000) squeeze:~# ldd /usr/sbin/apache2 linux-gate.so.1 = (0xe000) libpcre.so.3 = /usr/lib/libpcre.so.3 (0xb7f6d000) libaprutil-1.so.0 = /usr/lib/libaprutil-1.so.0 (0xb7f4d000) libapr-1.so.0 = /usr/lib/libapr-1.so.0 (0xb7f1f000) libpthread.so.0 = /lib/libpthread.so.0 (0xb7f07000) libc.so.6 = /lib/libc.so.6 (0xb7dc5000) libdb-4.7.so = /usr/lib/libdb-4.7.so (0xb7c6e000) libexpat.so.1 = /usr/lib/libexpat.so.1 (0xb7c48000) libuuid.so.1 = /lib/libuuid.so.1 (0xb7c44000) librt.so.1 = /lib/librt.so.1 (0xb7c3a000) libcrypt.so.1 = /lib/libcrypt.so.1 (0xb7c08000) libdl.so.2 = /lib/libdl.so.2 (0xb7c04000) /lib/ld-linux.so.2 (0xb7fa5000) There is significant difference in the library dependencies listed, and in particular, libssl, libcrypto, libkrb etc no longer appear. It makes no difference if ssl DSO modules are loaded or not, pubcookie yields the same error message. -- Package-specific info: Config file syntax check failed. List of /etc/apache2/mods-enabled/*.load: alias auth_basic authn_file authz_default authz_groupfile authz_host authz_user autoindex cgi deflate dir env mime negotiation pubcookie setenvif status -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.18-6-vserver-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages apache2-mpm-prefork depends on: ii apache2.2-bin 2.2.11-6 Apache HTTP Server common binary f ii apache2.2-common 2.2.11-6 Apache HTTP Server common files apache2-mpm-prefork recommends no packages. apache2-mpm-prefork suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#492379: libpam-krb5: version 3.11-1 prevented use of pam_krb5 in common-account
Russ Allbery wrote: [EMAIL PROTECTED] [EMAIL PROTECTED] writes: Prior to this version, we were able to employ an entry in /etc/pam.d/common-account which was: account [default=bad success=ok user_unknown=ignore service_err=ignore system_err=ignore] /lib/security/pam_krb5.so upgrade to 3.11-1 led to failure of accounts to log in in runlevel != 1 commentling out the line for pam_krb allows log in, but we have not identified how we can use this in account. Add ignore=ignore to your configuration line and see if that helps. I think it's currently being caught by your default line. the line (sorry for line-wrap): account [default=bad success=ok user_unknown=ignore service_err=ignore system_err=ignore ignore=ignore] /lib/security/pam_krb5.so does work ok. thanks. sb. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#426952: Not a security problem
From: Moritz Muehlenhoff [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Not a security problem Date: Fri, 1 Jun 2007 11:14:28 +0200 tags 426952 -security severity 426952 normal thanks Browser crashes triggered from parsing HTML are not treated as security problems, but as regular bugs. Just for clarification, this is in reference to the CVE? or to the CERT advisory? or both? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#353193: ITP: sqlitemanager -- Multilingual web based tool to manage SQLite databases
Peter Samuelson wrote: [Stefani Banerian] * Package name: sqlitemanager Version : x.y.z Upstream Author : Name [EMAIL PROTECTED] * URL : http://www.example.org/ * License : (GPL, LGPL, BSD, MIT/X, etc.) The information content here is rather thin. right. i was interrupted prior to completion or bugreport. the data should be: Package name: sqlitemanager Version : 1.2.0 Upstream Author : Frederic Henninot [EMAIL PROTECTED] URL : http://www.sqlitemanager.org/ License : GPL 2 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#353193: ITP: sqlitemanager -- Multilingual web based tool to manage SQLite databases
Package: wnpp Severity: wishlist Owner: Stefani Banerian [EMAIL PROTECTED] * Package name: sqlitemanager Version : x.y.z Upstream Author : Name [EMAIL PROTECTED] * URL : http://www.example.org/ * License : (GPL, LGPL, BSD, MIT/X, etc.) Description : Multilingual web based tool to manage SQLite databases SQLiteManager is a way to manage sqlite databases via the web. Some of its features: - Management of several databases (Creation, access or upload) - Create, edit and delete tables and indexes. - Insert, edit, delete records in these tables - Management of views, and ability to create a view from a SELECT - Management of triggers - Management of user-defined functions, as in the form of insertion/modification of data - Queries, either manual, or from filel; possible to define the format of the requests, sqlite or MySQL, with conversion in order to with conversion in order to directly import a MySQL database into SQLite. - Import of records from a formatted text file - Export of the structure and the data - Choice of several display skins -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.8-vs Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#347701: nanourl bug
severity 347701 important tags 347701 pending thanks justification: the package is usable to those not using apache2. for apache2 users, edits to the apache2 configuration will render the package usable. Paul Scott wrote: Package: nanourl Version: 0.1-6 Severity: grave Justification: renders package unusable I noticed apache2 was not running. The error message on trying to restart apache2 led me to Bug#339323: apache2-common: Looking at that bug report and /etc/init.d/apache2 I tried /usr/sbin/apache2ctl which told me there was an error in the nanourl script. (This may be due to the fact that I don't have mysql installed on this machine). I uninstalled nanourl and apache2 started working. Considering this worthy of a bug investigation I reinstalled nanourl. Now /etc/init.d/apache2 gives me: Forcing reload of apache 2.0 web server...grep: /etc/apache2/conf.d/nanourl: No such file or directory ... failed! Removing nanourl allows apache2 to run again. Paul Scott -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.14-2-k7 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages nanourl depends on: ii apache2 2.0.55-3 next generation, scalable, extenda ii apache2-mpm-prefork [apache2] 2.0.55-3 traditional model for Apache2 ii mysql-client 4.1.15-1 mysql database client (transitiona ii mysql-client-4.1 [mysql-clien 4.1.15-1 mysql database client binaries ii php4 4:4.4.0-4 server-side, HTML-embedded scripti ii php4-mysql4:4.4.0-4 MySQL module for php4 nanourl recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#294302: swatch: man page lists action inverse which is not supported
Package: swatch Version: 3.1.1-1 Severity: normal the man page for swatch lists actions which do not seem to be supported in this version of swatch. one example is inverse. previous versions of swatch allowed action echo inverse. it appears as though reverse is preferred now. an edit to man page should be sufficient. -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.8-2-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages swatch depends on: ii libdate-calc-perl 5.4-3 Perl library for accessing dates ii libdate-manip-perl5.42a-2a perl library for manipulating da ii libfile-tail-perl 0.98-5 File::Tail perl module ii libtimedate-perl 1.1600-4 Time and date functions for Perl ii perl [libtime-hires-perl] 5.8.4-5Larry Wall's Practical Extraction -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]