Bug#767836: closed by Ben Hutchings b...@decadent.org.uk (Re: Processed: Seems to come from the kernel upgrade)
I did reboot after the kernel upgrade. I just installed the new kernel again, rebooted, and now get the error again. This bug seems is not fixed by rebooting after the kernel upgrade. Regards, Thue 2014-11-03 18:03 GMT+01:00 Debian Bug Tracking System ow...@bugs.debian.org : This is an automatic notification regarding your Bug report which was filed against the linux package: #767836: openvpn: Openvpn server can't start after upgrade to kernel 3.2.63-2+deb7u1 (tun: Unknown symbol ipv6_proxy_select_ident) It has been closed by Ben Hutchings b...@decadent.org.uk. Their explanation is attached below along with your original report. If this explanation is unsatisfactory and you have not received a better one in a separate message then please contact Ben Hutchings b...@decadent.org.uk by replying to this email. -- 767836: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=767836 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- Videresendt meddelelse -- From: Ben Hutchings b...@decadent.org.uk To: 767836-d...@bugs.debian.org Cc: Date: Mon, 03 Nov 2014 16:59:38 + Subject: Re: Processed: Seems to come from the kernel upgrade You need to reboot after a kernel upgrade. Ben. -- Ben Hutchings Power corrupts. Absolute power is kind of neat. - John Lehman, Secretary of the US Navy 1981-1987 -- Videresendt meddelelse -- From: Thue thu...@gmail.com To: Debian Bug Tracking System sub...@bugs.debian.org Cc: Date: Sun, 02 Nov 2014 22:29:24 +0100 Subject: openvpn: Openvpn server can't start after upgrade to kernel 3.2.63-2+deb7u1 (tun: Unknown symbol ipv6_proxy_select_ident) Package: openvpn Version: 2.2.1-8+deb7u2 Severity: important My openvpn server stopped working after a recent kernel opgrade from linux-image-3.2.0-4-amd64_3.2.63-2_amd64.deb to linux-image-3.2.0-4-amd64_3.2.63-2+deb7u1_amd64.deb . Downgrading makes it work again. Doing an /etc/init.d/openvpn start resulted in the following error on the command line: === t@do ~ sudo /etc/init.d/openvpn start [sudo] password for thue: [FAIL] Starting virtual private network daemon: server failed! --- The following error was printed on the primary console (did not occur prior to the kernel upgrade): = tun: Unknown symbol ipv6_proxy_select_ident (err 0) Loading kernel module for a network device with CAP_SYS_MODULE (deprecated) Use CAP_NET_ADMIN and alias netdev- instead Loading kernel module for a network device with CAP_SYS_MODULE (deprecated) Use CAP_NET_ADMIN and alias netdev- instead Loading kernel module for a network device with CAP_SYS_MODULE (deprecated) Use CAP_NET_ADMIN and alias netdev- instead Loading kernel module for a network device with CAP_SYS_MODULE (deprecated) Use CAP_NET_ADMIN and alias netdev- instead Loading kernel module for a network device with CAP_SYS_MODULE (deprecated) Use CAP_NET_ADMIN and alias netdev- instead - And in /var/log/openvpn.log : === Sun Nov 2 22:19:51 2014 us=186982 Current Parameter Settings: Sun Nov 2 22:19:51 2014 us=187097 config = '/etc/openvpn/server.conf' Sun Nov 2 22:19:51 2014 us=187122 mode = 1 Sun Nov 2 22:19:51 2014 us=187139 persist_config = DISABLED Sun Nov 2 22:19:51 2014 us=187156 persist_mode = 1 Sun Nov 2 22:19:51 2014 us=187172 show_ciphers = DISABLED Sun Nov 2 22:19:51 2014 us=187188 show_digests = DISABLED Sun Nov 2 22:19:51 2014 us=187203 show_engines = DISABLED Sun Nov 2 22:19:51 2014 us=187218 genkey = DISABLED Sun Nov 2 22:19:51 2014 us=187234 key_pass_file = '[UNDEF]' Sun Nov 2 22:19:51 2014 us=187250 show_tls_ciphers = DISABLED Sun Nov 2 22:19:51 2014 us=187267 Connection profiles [default]: Sun Nov 2 22:19:51 2014 us=187285 proto = udp Sun Nov 2 22:19:51 2014 us=187302 local = '[UNDEF]' Sun Nov 2 22:19:51 2014 us=187317 local_port = 1194 Sun Nov 2 22:19:51 2014 us=187332 remote = '[UNDEF]' Sun Nov 2 22:19:51 2014 us=187348 remote_port = 1194 Sun Nov 2 22:19:51 2014 us=187364 remote_float = DISABLED Sun Nov 2 22:19:51 2014 us=187379 bind_defined = DISABLED Sun Nov 2 22:19:51 2014 us=187395 bind_local = ENABLED Sun Nov 2 22:19:51 2014 us=187410 NOTE: --mute triggered... Sun Nov 2 22:19:51 2014 us=187451 261 variation(s) on previous 20 message(s) suppressed by --mute Sun Nov 2 22:19:51 2014 us=187476 OpenVPN 2.2.1 x86_64-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 \ (2.2RC2)] built on Jun 18 2013 Sun Nov 2 22:19:51 2014 us=187763 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sun Nov 2 22:19:51 2014 us=200928 Diffie-Hellman initialized with 2048
Bug#767836: closed by Ben Hutchings b...@decadent.org.uk (Re: Processed: Seems to come from the kernel upgrade)
Yes, you are correct, thanks! Just for other people's reference, it seems that grub settings are ignored on digital ocean, and that you instead have to specify which kernel is booted from the Digital Ocean control panel, loaded from outside the droplet. That doesn't seem like a terribly smart setup to me, since it apparently use the kernel modules installed in the droplet, which obviously can be incompatible with the kernel. From https://www.digitalocean.com/community/questions/can-t-seem-to-load-fuse-module?comment=17236 : 1) log into the digital ocean control panel 2) go to the droplet that has this issue. 3) go to settings, then kernel 4) change it to the latest kernel. i.e. for me its: * Debian 7.0 x64 vmlinuz-3.2.0-4-amd64 (3.2.60-1+deb7u3) 5) power down your droplet 6) power up. Regards, Thue 2014-11-03 19:44 GMT+01:00 Ben Hutchings b...@decadent.org.uk: On Mon, 2014-11-03 at 18:13 +0100, Thue Janus Kristensen wrote: I did reboot after the kernel upgrade. I just installed the new kernel again, rebooted, and now get the error again. This bug seems is not fixed by rebooting after the kernel upgrade. Your boot loader is still loading the old kernel. That's a problem in your boot loader configuration, not the new kernel. Ben. -- Ben Hutchings Power corrupts. Absolute power is kind of neat. - John Lehman, Secretary of the US Navy 1981-1987
Bug#765730: Can debian/rules build target use precompiled object code in favor of building from source?
Sounds Good :). Regards, Thue 2014-10-20 0:11 GMT+02:00 Mike Gabriel sunwea...@debian.org: Hi Thue, On Fr 17 Okt 2014 22:12:35 CEST, Thue Janus Kristensen wrote: That is a related but separate problem. I actually reported that in 2011, and it was fixed for Wheezy: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=636148 (smarty3 Debian maintainer CC'ed) But it seems to have been reverted sometime since, and in Jessie the Debian smarty3 package no longer includes the source code. Regards, Thue Your filed bugs (against package smarty3) tackle two issues: (1) There are indeed (at least) 4 source files that are used by upstream to generate the smarty3 release tarball, but that do not get shipped with the upstream source tarball itself. These files only exist in SVN folder trunk/development. This folder exists outside of the tagged SVN source subtree that marks every smarty3 release (trunk/distribution/). The previous maintainer of smarty3 closed your filed bug #636148 [2] by including the trunk/development folder in the Debian source package of smarty3 but oversaw two issues that I will describe below (embedded libraries, shipping of PHP 3.0 License licensed code). (2) Next issue is that I dropped re-building the result of smarty_internal_configfileparser.y during debian/rules but rather use the built result file from the upstream tarball (filed as bug #765730 [3]). The reason for this change actually was the already alluded to double policy violation (see [1]): - Shipping of embedded code (PHPUnit, lexer) in the smarty3 Debian source package which got obtained from SVN (trunk). - License in use that is considered as non-DFSG (lexer: PHP 3.0 license) The very easy solution at that time for me seemed to drop the embedded PHP libraries PHPUnit and lexer from the upstream orig tarball completely and use the generated files from the release tarball. Esp. because the generated PHP file is a human-readable, non-obscured, well-layouted (but generated) PHP code file. Suggested approach for now (i.e. Debian jessie): A. Fix for #636148: ship files from http://smarty-php.googlecode.com/svn/trunk/development/lexer/ namely smarty_internal_configfilelexer.* (except the .php) smarty_internal_configfileparser.* (except the .php) smarty_internal_templatelexer.* (except the .php) smarty_internal_templateparser.* (except the .php) in the smarty3 Debian source package. I have provide this in the recent upload of smarty3_3.1.21-1. B. Leave #765730 open as a reminder that (for jessie+1) I need to get in contact with the upstream author of lexer and ask to relicense the lexer PHP code. Then make sure PHPUnit and lexer are packaged in Debian, then adapt debian/rules of smarty3 to build all its files from source (and omit the embedded libraries when obtaining/repacking smarty3 orig tarball). Greets, Mike [1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=752614 [2] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=636148 [3] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=765730 -- mike gabriel aka sunweaver (Debian Developer) fon: +49 (1520) 1976 148 GnuPG Fingerprint: 9BFB AEE8 6C0A A5FF BF22 0782 9AF4 6B30 2577 1B31 mail: sunwea...@debian.org, http://sunweavers.net
Bug#699055: konsole: Visual glitch when using mouse to mark text
Package: konsole Version: 4:4.8.4-2 Severity: minor Dear Maintainer, When marking text in the console, there are visual glitches. For example starting in the upper left corner with the mouse and marking the whole console will produce the glitches. Moving the mouse slower will produce more. Demo video: http://www.thuejk.dk/konsole_bug.mov Regards, Thue -- System Information: Debian Release: 7.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.6-trunk-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages konsole depends on: ii kde-runtime4:4.8.4-2 ii libc6 2.13-38 ii libkdecore54:4.8.4-4 ii libkdeui5 4:4.8.4-4 ii libkio54:4.8.4-4 ii libknotifyconfig4 4:4.8.4-4 ii libkonq5abi1 4:4.8.4-2 ii libkparts4 4:4.8.4-4 ii libkpty4 4:4.8.4-4 ii libqt4-dbus4:4.8.1-1 ii libqtcore4 4:4.8.1-1 ii libqtgui4 4:4.8.1-1 ii libstdc++6 4.7.2-5 ii libx11-6 2:1.5.0-1 konsole recommends no packages. konsole suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#699055: ignore that, X server problem
Eh, seems my X server had come into an inconsistent state. Probably not a konsole problem. close #699055 Regards, Thue
Bug#568752: kdm: Garbage show on second screen of extended desktop
It seems to be fixed. Regards, Thue 2013/1/2 Adrien adrien.grell...@laposte.net tag 568752 moreinfo thanks Hi, Are you still affected by this bug with newer version of KDE (4.8.4 in testing/sid) ? Without any answer in a month, I will close the bug. Regards, Adrien
Bug#575273: systemsettings: Dual screen setup doesn't work
I just tested, and the KDE multiscreen setup works for me now! So this bug should be closed. Regards, Thue 2012/10/31 Adrien adrien.grell...@laposte.net tag 575273 moreinfo thanks Hi, The bug is rather old, so could you please try with new version of KDE (4.8.4 in testing/sid) ? Otherwise I will close it. Regards, Adrien
Bug#678969: mumble-server: Upon removal, leftover /etc/logrotate.d/mumble-server causes errors
Package: mumble-server Version: 1.2.3-349-g315b5f5-1 Severity: normal File: mumble-server Dear Maintainer, Upon doing aptitude remove mumble-server, a /etc/logrotate.d/mumble-server is left. This is as it should be, since configuration files should not be deleted upon removal. But this logrotate script causes the following error /etc/cron.daily/logrotate: start-stop-daemon: unable to stat /usr/sbin/murmurd (No such file or directory) error: error running non-shared postrotate script for /var/log/mumble-server/mumble-server.log of '/var/log/mumble-server/mumble-server.log ' run-parts: /etc/cron.daily/logrotate exited with return code 1 The script looks like this: /var/log/mumble-server/mumble-server.log { weekly rotate 7 compress delaycompress missingok postrotate start-stop-daemon --quiet --oknodo --stop --signal 1 --exec /usr/sbin/murmurd --user mumble-server --pidfile /var/run/mumble-server/mumble-server.pid endscript } Where it is obviously the postrotate action which references /usr/sbin/murmurd. The postrotate action should exit if the murmur binary does not exist, like the /etc/init.d/mumble-server (and all other policy-compliant) package does: /etc/init.d/mumble-server : DAEMON=/usr/sbin/murmurd [...] test -x $DAEMON || exit 0 Perhaps the author tried to get this effect with --exec /usr/sbin/murmurd combined with --oknodo, but it seems that start-stop-daemon actually requires the binary to exist, even with --oknodo. Regards, Thue ps: I have no idea why it is a good idea to send a HANGUP signal to mumble-server in the logrotate postrotate, as it currently does. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages mumble-server depends on: ii adduser3.113+nmu3 ii dbus 1.6.0-1 ii debconf [debconf-2.0] 1.5.43 ii libavahi-client3 0.6.31-1 ii libavahi-common3 0.6.31-1 ii libavahi-compat-libdnssd1 0.6.31-1 ii libc6 2.13-33 ii libcap21:2.22-1.1 ii libgcc11:4.7.1-1 ii libiceutil34 3.4.2-8 ii libprotobuf7 2.4.1-2 ii libqt4-dbus4:4.8.1-1 ii libqt4-network 4:4.8.1-1 ii libqt4-sql 4:4.8.1-1 ii libqt4-sql-sqlite 4:4.8.1-1 ii libqt4-xml 4:4.8.1-1 ii libqtcore4 4:4.8.1-1 ii libssl1.0.01.0.1c-3 ii libstdc++6 4.7.1-1 ii libzeroc-ice34 3.4.2-8 mumble-server recommends no packages. Versions of packages mumble-server suggests: pn mumble-django none pn mumble-server-web none -- Configuration Files: /etc/mumble-server.ini [Errno 13] Adgang nægtet: u'/etc/mumble-server.ini' -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#679008: kdewallpapers: Conflicts with /usr/share/wallpapers/Evening/contents/screnshot.jpg from package kdebase-workspace-data 4:4.6.5-4
Package: kdewallpapers Version: 4:4.7.4-2 Severity: normal Dear Maintainer, kdewallpapers_4%3a4.8.4-1_all.deb seems to be uninstallable, due to a conflict with /usr/share/wallpapers/Evening/contents/screnshot.jpg from package kdebase-workspace-data 4:4.6.5-4 : t@h ~ sudo aptitude upgrade Udreder afhængigheder ... Følgende pakker vil blive opgraderet: kdewallpapers 1 pakker opgraderet, 0 nyinstalleret, 0 til afinstallering og 94 ikke opgraderet. Skal hente 0 B/115 MB arkiver. Efter udpakning vil 21,6 MB blive brugt. Vil du fortsætte? [Y/n/?] (Læser database ... 266523 filer og kataloger installeret i øjeblikket.) Gør klar til at erstatte kdewallpapers 4:4.7.4-2 (med .../kdewallpapers_4%3a4.8.4-1_all.deb)... Udpakker erstatning for kdewallpapers... dpkg: fejl under behandling af /var/cache/apt/archives/kdewallpapers_4%3a4.8.4-1_all.deb (--unpack): forsøger at overskrive '/usr/share/wallpapers/Evening/contents/screnshot.jpg', som også er i pakken kdebase-workspace-data 4:4.6.5-4 dpkg-deb: error: subprocess indsæt was killed by signal (Kanalen blev brudt) Der opstod fejl under behandlingen: /var/cache/apt/archives/kdewallpapers_4%3a4.8.4-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) En pakke lod sig ikke installere. Prøver at overvinde problemet: t@h ~ Regards, Thue -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash kdewallpapers depends on no packages. kdewallpapers recommends no packages. Versions of packages kdewallpapers suggests: ii kde-window-manager [x-window-manager] 4:4.6.5-4 -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#676815: mumble-server-web: Must depend on libapache2-mod-php5
Package: mumble-server-web Version: 1.2.3-349-g315b5f5-1 Severity: serious Justification: Policy 3.5 Dependencies: Every package must specify the dependency information about other packages that are required for the first to work correctly. Dear Maintainer, Since the package depends on apache2, and uses php5 files to display the web interface, it needs libapache2-mod-php5 to work. Regards, Thue *** Please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these lines *** -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages mumble-server-web depends on: ii apache2 2.2.22-6 ii apache2-mpm-prefork [apache2]2.2.22-6 ii ice34-slice [ice-slice] 3.4.2-8 ii ice34-translators [ice-translators] 3.4.2-8 ii libcgi-session-perl 4.46-1 ii libhtml-template-perl2.91-1 ii libnet-dbus-perl 1.0.0-1+b1 ii mumble-server1.2.3-349-g315b5f5-1 ii perl 5.14.2-11 ii php-zeroc-ice3.4.2-8 ii postfix [mail-transport-agent] 2.9.3-2 mumble-server-web recommends no packages. mumble-server-web suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#676816: mumble-server-web: Ice include problems
Package: mumble-server-web Version: 1.2.3-349-g315b5f5-1 Severity: grave Justification: renders package unusable Dear Maintainer, After installing mumble-server-web and visiting http://localhost/mumble-server , I get the following in /var/log/apache2/error.log PHP Fatal error: Call to undefined function Ice_intversion() in /usr/share/mumble-server-web/www/weblist.php on line 14 This seems to be an include problem, as /usr/share/Ice-3.4.2/php/lib/Ice.php is not in the default php include path. Setting include_path = .:/usr/share/php:/usr/share/Ice-3.4.2/php/lib in /etc/php5/apache2/php.ini makes it go a bit further, but it hits other include path problems after that. In short, the mumble-server-web package is completely broken. The actual bug may be in the php-zeroc-ice package. I reported the same bug at https://bugs.launchpad.net/ubuntu/+source/mumble/+bug/1010573 Regards, Thue *** Please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these lines *** -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages mumble-server-web depends on: ii apache2 2.2.22-6 ii apache2-mpm-prefork [apache2]2.2.22-6 ii ice34-slice [ice-slice] 3.4.2-8 ii ice34-translators [ice-translators] 3.4.2-8 ii libcgi-session-perl 4.46-1 ii libhtml-template-perl2.91-1 ii libnet-dbus-perl 1.0.0-1+b1 ii mumble-server1.2.3-349-g315b5f5-1 ii perl 5.14.2-11 ii php-zeroc-ice3.4.2-8 ii postfix [mail-transport-agent] 2.9.3-2 mumble-server-web recommends no packages. mumble-server-web suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#644283: update-flashplugin-nonfree should install latest version 11 (released October 3)
Package: flashplugin-nonfree Version: 1:2.8.3 Severity: normal Dear Maintainer, Running sudo update-flashplugin-nonfree --install --verbose it installs flashplayer11_rc1_install_lin_64_090611.tar.gz . But a new non-preview version of flash 11 was released yesterday. It would be nice if flashplayer-nonfree was updated to use this version Regards, Thue -- Package-specific info: Debian version: wheezy/sid Architecture: amd64 Package version: 1:2.8.3 Adobe Flash Player version: LNX 11,0,1,129 MD5 checksums: 49b55c7eb8044453e5f6f2e4b3cb4084 /var/cache/flashplugin-nonfree/flashplayer10_2_p3_64bit_linux_111710.tar.gz fd9bea881552223ddd73ccd84d2cd459 /var/cache/flashplugin-nonfree/flashplayer11_rc1_install_lin_64_090611.tar.gz 338e954c02ba6776b6b8a908e6f96b5f /var/cache/flashplugin-nonfree/flashplayer_square_p1_64bit_linux_091510.tar.gz 332e60275e9c7a92059f286a2bad6e41 /var/cache/flashplugin-nonfree/libflashplayer-10.0.32.18.linux-x86_64.so.tar.gz 8b427c2991c0447af56a951c653ee383 /var/cache/flashplugin-nonfree/libflashplayer-10.0.42.34.linux-x86_64.so.tar.gz 4a4561e456612a6751653b58342d53df /var/cache/flashplugin-nonfree/libflashplayer-10.0.45.2.linux-x86_64.so.tar.gz e69b6683ba41adb7a8f746681bd256c5 /usr/lib/flashplugin-nonfree/libflashplayer.so Alternatives: flash-mozilla.so - auto mode link currently points to /usr/lib/flashplugin-nonfree/libflashplayer.so /usr/lib/flashplugin-nonfree/libflashplayer.so - priority 50 Current 'best' version is '/usr/lib/flashplugin-nonfree/libflashplayer.so'. lrwxrwxrwx 1 root root 34 Jan 9 2011 /usr/lib/mozilla/plugins/flash-mozilla.so - /etc/alternatives/flash-mozilla.so /usr/lib/mozilla/plugins/flash-mozilla.so: symbolic link to `/etc/alternatives/flash-mozilla.so' -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages flashplugin-nonfree depends on: ii debconf [debconf-2.0] 1.5.41 ii gnupg 1.4.11-3 ii libatk1.0-02.2.0-1 ii libcairo2 1.10.2-6.1 ii libcurl3-gnutls7.21.7-3 ii libfontconfig1 2.8.0-3 ii libfreetype6 2.4.6-2 ii libgcc11:4.6.1-13 ii libglib2.0-0 2.28.6-1 ii libgtk2.0-02.24.6-1 ii libnspr4-0d4.8.9-1 ii libnss3-1d 3.12.11-3 ii libpango1.0-0 1.28.4-3 ii libstdc++6 4.6.1-13 ii libx11-6 2:1.4.4-2 ii libxext6 2:1.3.0-3 ii libxt6 1:1.1.1-2 ii wget 1.13-1 flashplugin-nonfree recommends no packages. Versions of packages flashplugin-nonfree suggests: ii flashplugin-nonfree-extrasound none ii iceweasel 7.0.1-1 ii konqueror-nsplugins 4:4.6.5-1 ii msttcorefonts none ii ttf-dejavu 2.33-2 ii ttf-xfree86-nonfree none ii x-ttcidfont-conf32+nmu2 -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#642130: chromium: HTML5 video tag stopped working when I upgraded from 13.0.782.220~r99552-1 to 14.0.835.163~r101024-1
Package: chromium Version: 14.0.835.163~r101024-1 Severity: important Dear Maintainer, Support for the HTML5 video tag stopped working when I upgraded from chromium 13.0.782.220~r99552-1 to 14.0.835.163~r101024-1 . For example, the test at the bottom of the page http://www.youtube.com/html5 says Your browser does not support HTML5 video with our site. now, but it works if I downgrade chromium to 13.0.782.220~r99552-1 . Regards, Thue -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages chromium depends on: ii chromium-inspector 14.0.835.163~r101024-1 ii libasound2 1.0.24.1-4 ii libavcodec535:0.8.3-0.0 ii libavformat53 5:0.8.3-0.0 ii libavutil51 5:0.8.3-0.0 ii libbz2-1.0 1.0.5-7 ii libc6 2.13-21 ii libcairo2 1.10.2-6.1 ii libcups21.5.0-6 ii libdbus-1-3 1.4.14-1 ii libdbus-glib-1-20.94-4 ii libevent-1.4-2 1.4.14b-stable-1 ii libexpat1 2.0.1-7 ii libflac81.2.1-5 ii libfontconfig1 2.8.0-3 ii libfreetype62.4.6-2 ii libgcc1 1:4.6.1-11 ii libgconf2-4 2.32.4-1 ii libgcrypt11 1.5.0-3 ii libgdk-pixbuf2.0-0 2.24.0-1 ii libglib2.0-02.28.6-1 ii libgtk2.0-0 2.24.6-1 ii libicu444.4.2-2 ii libjpeg88c-2 ii libnspr4-0d 4.8.9-1 ii libnss3-1d 3.12.11-3 ii libpango1.0-0 1.28.4-3 ii libpng12-0 1.2.46-3 ii libspeex1 1.2~rc1-1 ii libstdc++6 4.6.1-11 ii libv8-3.4.14.21 3.4.14.21-1 ii libvpx0 0.9.7.p1-1 ii libwebp00.1.2-1 ii libx11-62:1.4.4-1 ii libxext62:1.3.0-3 ii libxml2 2.7.8.dfsg-4 ii libxrender1 1:0.9.6-2 ii libxslt1.1 1.1.26-8 ii libxss1 1:1.2.1-2 ii xdg-utils 1.1.0~rc1-2 ii zlib1g 1:1.2.3.4.dfsg-3 chromium recommends no packages. Versions of packages chromium suggests: pn chromium-l10n none -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#636148: Better, but still not perfect
According to http://www.debian.org/doc/debian-policy/ch-source.html , section 4.14 Source package handling: debian/README.source: If running dpkg-source -x on a source package doesn't produce the source of the package, ready for editing, and allow one to make changes and run dpkg-buildpackage to produce a modified package without taking any additional steps, creating a debian/README.source documentation file is recommended. So since you need to run the Smarty_3_x_x/development/Makefile after modifying the .y file, the current package is lacking (there is no debian/README.source file either). IMO, the debian/rules build rule should run the Smarty_3_x_x/development/Makefile to compile the .y and .plex files , even though smarty SVN comes with a compiled version. That way you are also sure that the installed compiled version of these files actually corresponds to the source version. Regards, Thue
Bug#641704: unbound-host should be preconfigured with DNS root trust anchor
Package: unbound-host Version: 1.4.12-1 Severity: normal Dear Maintainer, Using a simple aptitude install unbound-host, the installed unbound-host doesn't seem to know about the root trust anchor. And there is no description in the man page, or in /ush/share/doc/unbound-host, about how to get and install this anchor. The DNS root is now signed. Since I expect most people will use the root trust anchor, then it would make sense for this to be preconfigured. If the root anchor is changed, then an update can be put into the Debian volative repository. To document that the current unbound-host installation don't know about the root trust anchor, I ran the following commands: t@h ~ unbound-host -v isc.org isc.org has address 149.20.64.42 (insecure) isc.org has IPv6 address 2001:4f8:0:2::d (insecure) isc.org mail is handled by 10 mx.ams1.isc.org. (insecure) isc.org mail is handled by 10 mx.pao1.isc.org. (insecure) t@h ~ unbound-host -v -y . IN DS 19036 8 2 49AAC11D7B6F6446702E54A1607371607A1A41855200FD2CE1CDDE32F24E8FB5 isc.org isc.org has address 149.20.64.42 (secure) isc.org has IPv6 address 2001:4f8:0:2::d (secure) isc.org mail is handled by 10 mx.pao1.isc.org. (secure) isc.org mail is handled by 10 mx.ams1.isc.org. (secure) Regards, Thue PS: why doesn't running t@h ~ unbound-host isc.org isc.org has address 149.20.64.42 isc.org has IPv6 address 2001:4f8:0:2::d isc.org mail is handled by 10 mx.pao1.isc.org. isc.org mail is handled by 10 mx.ams1.isc.org. Throw a warning or error, since by running with -v I can see that validation failed? -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages unbound-host depends on: ii libc6 2.13-21 ii libev41:4.04-1 ii libgcc1 1:4.6.1-10 ii libldns1 1.6.10-2 ii libpython2.6 2.6.7-4 ii libssl1.0.0 1.0.0e-2 ii libunbound2 1.4.12-1 unbound-host recommends no packages. unbound-host suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#638749: sysfsutils: Silently ignores the last line if there is no trailing newline
Package: sysfsutils Version: 2.1.0+repack-1 Severity: normal If the file does not end in a newline, then the last line is silently ignored. This is because the read command in /etc/init.d/sysfsutils does not match lines without a trailing newline. A patch to fix this: --- init.d/sysfsutils 2010-08-06 19:16:17.0 +0200 +++ /etc/init.d/sysfsutils 2011-08-21 17:02:39.0 +0200 @@ -27,9 +27,9 @@ start|restart|force-reload) log_begin_msg Setting sysfs variables... + (cat $CONFFILE;echo) | #add a trailing newline sed 's/#.*$//; /^[[:space:]]*$/d; - s/^[[:space:]]*\([^=[:space:]]*\)[[:space:]]*\([^=[:space:]]*\)[[:space:]]*=[[:space:]]*\(.*\)/\1 \2 \3/' \ - $CONFFILE | { + s/^[[:space:]]*\([^=[:space:]]*\)[[:space:]]*\([^=[:space:]]*\)[[:space:]]*=[[:space:]]*\(.*\)/\1 \2 \3/' | { while read f1 f2 f3; do if [ $f1 = mode -a -n $f2 -a -n $f3 ]; then if [ -f /sys/$f2 ]; then Regards, Thue -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages sysfsutils depends on: ii libc6 2.13-16Embedded GNU C Library: Shared lib ii libsysfs2 2.1.0+repack-1 interface library to sysfs sysfsutils recommends no packages. sysfsutils suggests no packages. -- Configuration Files: /etc/init.d/sysfsutils changed: CONFFILE=/etc/sysfs.conf [ -r $CONFFILE ] || exit 0 . /lib/lsb/init-functions case $1 in start|restart|force-reload) log_begin_msg Setting sysfs variables... (cat $CONFFILE;echo) | #add a trailing newline sed 's/#.*$//; /^[[:space:]]*$/d; s/^[[:space:]]*\([^=[:space:]]*\)[[:space:]]*\([^=[:space:]]*\)[[:space:]]*=[[:space:]]*\(.*\)/\1 \2 \3/' | { while read f1 f2 f3; do if [ $f1 = mode -a -n $f2 -a -n $f3 ]; then if [ -f /sys/$f2 ]; then chmod $f3 /sys/$f2 else log_failure_msg unknown attribute $f2 fi elif [ $f1 = owner -a -n $f2 -a -n $f3 ]; then if [ -f /sys/$f2 ]; then chown $f3 /sys/$f2 else log_failure_msg unknown attribute $f2 fi elif [ $f1 -a -n $f2 -a -z $f3 ]; then if [ -f /sys/$f1 ]; then # Some fields need a terminating newline, others # need the terminating newline to be absent :-( echo -n $f2 /sys/$f1 2/dev/null || echo $f2 /sys/$f1 else log_failure_msg unknown attribute $f1 fi else log_failure_msg syntax error in $CONFFILE: '$f1' '$f2' '$f3' log_end_msg 1 exit 1 fi done } log_end_msg 0 ;; stop) ;; *) echo Usage: /etc/init.d/sysfsutils {start|stop|force-reload|restart} exit 1 ;; esac /etc/sysfs.conf changed: class/drm/card0/device/power_profile = auto -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#636148: smarty3: Smarty3 source package does not contain source code
2011/8/4 Julian Andres Klode j...@debian.org On Sun, Jul 31, 2011 at 07:49:11PM +0200, Thue Janus Kristensen wrote: [...] The problem here is that upstream is distributing created code without corresponding source code on their website. In short, given that Smarty does not require copyright assignment, they are violating the license of 3rd party contributions, and cause all redistributors to be in violation as well, which formally speaking, terminates the rights to distribute Smarty 3 of everyone distributing it, as per Section 8 of the license. svn with the source code is available from the smarty download page. So IMO, smarty is distributing the source code from the same place (the smarty download page) as the tarballs, as required by the GPL. Regards, Thue
Bug#636148: Location of the smarty 3 source code
The .y files aren't in the tarball from the download page, could you include them in the next release ? I am not actually a real smarty developer, I just contributed some code, and then left :). But for example the source code for the 3.0.8 release is available from svn, using the command svn export http://smarty-php.googlecode.com/svn/tags/Smarty_3_0_8/ There is a simple Makefile in Smarty_3_0_8/development/Makefile . A make all will compile all files, and copy the compiled files into the correct place in Smarty_3_0_8/distribution . Regards, Thue
Bug#636148: smarty3: Smarty3 source package does not contain source code
Package: smarty3 Version: 3.0.8-1 Severity: normal As far as I can tell, the Smarty3 source package does not actually contain the smarty3 source code. For example, I wrote the file http://smarty-php.googlecode.com/svn/trunk/development/lexer/smarty_internal_configfileparser.y which is the source code for the file http://smarty-php.googlecode.com/svn/trunk/distribution/libs/sysplugins/smarty_internal_templateparser.php which is included in the Debian Smarty3 package. As the GPL states, The “source code” for a work means the preferred form of the work for making modifications to it.. So since the .y files is obviously the preferred form, smarty_internal_configfileparser.y should be distributed in the Debian source package, to be in compliance with the GNU LGPL. Regards, Thue -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.39-2-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages smarty3 depends on: ii php5-cli 5.3.6-13 command-line interpreter for the p smarty3 recommends no packages. smarty3 suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#628735: fusermount -u: /bin/umount: unrecognized option '--fake'
Package: fuse Version: 2.8.5-2 Severity: normal sorteret is an sshfs-mounted file system t@h ~ fusermount -u sorteret /bin/umount: unrecognized option '--fake' Usage: umount -h | -V umount -a [-d] [-f] [-r] [-n] [-v] [-t vfstypes] [-O opts] umount [-d] [-f] [-r] [-n] [-v] special | node... Regards, Thue -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.39-1-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages fuse depends on: ii adduser 3.112+nmu2 add and remove users and groups ii libc6 2.13-4 Embedded GNU C Library: Shared lib ii libfuse2 2.8.5-2Filesystem in Userspace (library) ii makedev 2.3.1-89 creates device files in /dev ii sed 4.2.1-9The GNU sed stream editor ii udev 170-1 /dev/ and hotplug management daemo fuse recommends no packages. fuse suggests no packages. -- Configuration Files: /etc/fuse.conf changed: user_allow_other -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#620246: idanish: Conflicts with newest ispell
Package: idanish Version: 1.6.25-1 Severity: important idanish is not installable in the current Debian sid: t@h ~ sudo aptitude dist-upgrade Følgende NYE pakker vil blive installeret: ienglish-common{a} Følgende pakker vil blive opgraderet: iamerican ibritish ispell{b} 3 pakker opgraderet, 1 nyinstalleret, 0 til afinstallering og 0 ikke opgraderet. Skal hente 585 kB arkiver. Efter udpakning vil 3.248 kB blive frigjort. Følgende pakker har uopfyldte afhængigheder: ispell: Ødelægger: idanish (= 1.6.25-1) men 1.6.25-1 er installeret. De følgende handlinger vil udrede disse afhængigheder: Afinstallér de følgende pakker: 1) idanish Regards, Thue -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.38-1-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages idanish depends on: ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy ii dictionaries-common 1.10.6 Common utilities for spelling dict ii ispell3.1.20.0-9 International Ispell (an interacti idanish recommends no packages. Versions of packages idanish suggests: ii wdanish 1.6.25-1 The Comprehensive Danish Dictionar -- debconf information: shared/packages-ispell: idanish/languages: danish (Den Store Danske Ordliste) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#616389: xserver-xorg-video-radeon: Crashes when closing graphical VT ((EE) RADEON(0): failed to set mode: Permission denied)
2011/3/12 Michel Dänzer daen...@debian.org On Fre, 2011-03-11 at 22:49 +, Thue Janus Kristensen wrote: I had 7.10-4. Downgrading to libgl1-mesa-dri_7.7.1-4_amd64.deb seems to fix the crash. Mesa upstream Git commit 9b7f3776359640d452697f3a487a345820abebf0 ('r600: don't close fd on failed load') might fix the problem with the r600g driver shipped in 7.10-4 then. I recompiled the Debian libgl1-mesa-dri_7.10-4 package with that patch manually applied, and the problem went away :). Regards, Thue
Bug#616389: xserver-xorg-video-radeon: Crashes when closing graphical VT ((EE) RADEON(0): failed to set mode: Permission denied)
2011/3/11 Michel Dänzer daen...@debian.org On Don, 2011-03-10 at 15:33 +0100, Michel Dänzer wrote: On Don, 2011-03-10 at 14:13 +, Thue Janus Kristensen wrote: Accoding to gdb, the second server is called as drmDropMaster(fd=9) and the first server calls drmSetMaster(fd=9) Switching between VT7 and VT8 a few times, they also are both called with drmDropMaster(fd=9) and drmSetMaster(fd=9). Then I'm confused why the EBADF... If the file descriptor was closed before drmDropMaster, then I would have expected that to implicitly drop master as well. Just in case though, assuming you guys have libgl1-mesa-dri 7.10-3 or newer, does downgrading that to an older version fix the problem? I had 7.10-4. Downgrading to libgl1-mesa-dri_7.7.1-4_amd64.deb seems to fix the crash. I tried compiling the kernel to debug, but I am having some general problems. Apparently the current kernel in unstable is not compilable with the current binutils in unstable. And the latest downloaded from from kernel.org fails to mount the root filesystem. Grumble. I can find a solution, I just needed to lament a bit to somebody :). Regards, Thue
Bug#616389: xserver-xorg-video-radeon: Crashes when closing graphical VT ((EE) RADEON(0): failed to set mode: Permission denied)
finish doesn't display the return value, because there is no debug symbols. And amd64 assembler is not my strong point. A random page on the Internet said that the return value is probably in eax. Doing print $eax after finish on drmDropMaster on the second X server, I get the value -1. Regards, Thue 2011/3/10 Michel Dänzer daen...@debian.org On Mit, 2011-03-09 at 18:04 +, Thue Janus Kristensen wrote: 2011/3/9 Michel Dänzer daen...@debian.org How about if you only set a breakpoint on drmDropMaster in the second server, and on hitting it just 'finish' the function before continuing. Does the first server hit drmSetMaster before drmDropMaster has finished in the second one? No. Nothing happens even after I finish in the second server. Only when I continue after the drmDropMaster finish, does the first server hit the drmSetMaster breakpoint (or crash if there is no drmSetMaster breakpoint). Hmm, weird. Does drmDropMaster return 0, or an error code? -- Earthling Michel Dänzer |http://www.vmware.com Libre software enthusiast | Debian, X and DRI developer
Bug#616389: xserver-xorg-video-radeon: Crashes when closing graphical VT ((EE) RADEON(0): failed to set mode: Permission denied)
Googling a bit more, it turns out that the return value on amd64 is in $rax. That value was also -1. Regards, Thue 2011/3/10 Thue Janus Kristensen thu...@gmail.com finish doesn't display the return value, because there is no debug symbols. And amd64 assembler is not my strong point. A random page on the Internet said that the return value is probably in eax. Doing print $eax after finish on drmDropMaster on the second X server, I get the value -1. Regards, Thue 2011/3/10 Michel Dänzer daen...@debian.org On Mit, 2011-03-09 at 18:04 +, Thue Janus Kristensen wrote: 2011/3/9 Michel Dänzer daen...@debian.org How about if you only set a breakpoint on drmDropMaster in the second server, and on hitting it just 'finish' the function before continuing. Does the first server hit drmSetMaster before drmDropMaster has finished in the second one? No. Nothing happens even after I finish in the second server. Only when I continue after the drmDropMaster finish, does the first server hit the drmSetMaster breakpoint (or crash if there is no drmSetMaster breakpoint). Hmm, weird. Does drmDropMaster return 0, or an error code? -- Earthling Michel Dänzer |http://www.vmware.com Libre software enthusiast | Debian, X and DRI developer
Bug#616389: xserver-xorg-video-radeon: Crashes when closing graphical VT ((EE) RADEON(0): failed to set mode: Permission denied)
2011/3/10 Michel Dänzer daen...@debian.org On Don, 2011-03-10 at 12:38 +, Thue Janus Kristensen wrote: finish doesn't display the return value, because there is no debug symbols. Install libdrm2-dbg? :) Ah, thanks. The return value is indeed -1. A random page on the Internet said that the return value is probably in eax. Doing print $eax after finish on drmDropMaster on the second X server, I get the value -1. Can you get the value of errno as well? (gdb) finish [...] (gdb) print errno $6 = 9 This does indicate that the DRM_IOCTL_DROP_MASTER may be failing, which could explain the problem. The question why it would fail. Looking at drm_dropmaster_ioctl() in the kernel, I think the only relevant case is if (!file_priv-minor-master) return -EINVAL; but I don't know how file_priv-minor-master could be NULL. Perhaps I should insert a debug print in the kernel source code, to verify that it is indeed that one which triggers? Regards, Thue
Bug#617672: apt-get source linux-image-2.6.37-2-amd64 returns source of linux-2.6-2.6.38~rc6
Package: linux-2.6 Version: 2.6.37-2 Severity: normal I believe that apt-get source linux-image-2.6.37-2-amd64 should give me the linux-2.6.37-2 source code, and not the linux-2.6 2.6.38~rc6-1 source code. But when run: t@h ~/linux-2.6-2.6.38~rc6 apt-get source linux-image-2.6.37-2-amd64 Indlæser pakkelisterne... Færdig Opbygger afhængighedstræ Læser tilstandsoplysninger... Færdig Vælger 'linux-2.6' som kildepakke fremfor 'linux-image-2.6.37-2-amd64' BEMÆRK: Pakning af 'linux-2.6' vedligeholdes i versionskontrolsystemet 'Svn' på: svn://svn.debian.org/svn/kernel/dists/sid/linux-2.6/ 94,9 MB skal hentes fra kildetekst-arkiverne. Henter:1 http://ftp.dk.debian.org/debian/ experimental/main linux-2.6 2.6.38~rc6-1~experimental.1 (dsc) [5.392 B] Henter:2 http://ftp.dk.debian.org/debian/ experimental/main linux-2.6 2.6.38~rc6-1~experimental.1 (tar) [94,3 MB] [...] Regards, Thue -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#616389: xserver-xorg-video-radeon: Crashes when closing graphical VT ((EE) RADEON(0): failed to set mode: Permission denied)
Accoding to gdb, the second server is called as drmDropMaster(fd=9) and the first server calls drmSetMaster(fd=9) Switching between VT7 and VT8 a few times, they also are both called with drmDropMaster(fd=9) and drmSetMaster(fd=9). Regards, Thue 2011/3/10 Michel Dänzer daen...@debian.org On Don, 2011-03-10 at 13:21 +, Thue Janus Kristensen wrote: 2011/3/10 Michel Dänzer daen...@debian.org On Don, 2011-03-10 at 12:38 +, Thue Janus Kristensen wrote: after finish on drmDropMaster on the second X server, I get the value -1. Can you get the value of errno as well? (gdb) finish [...] (gdb) print errno $6 = 9 That's EBADF, so apparently the file descriptor passed in is invalid. Is it the same one that was passed to drmSetMaster? -- Earthling Michel Dänzer |http://www.vmware.com Libre software enthusiast | Debian, X and DRI developer
Bug#616389: xserver-xorg-video-radeon: Crashes when closing graphical VT ((EE) RADEON(0): failed to set mode: Permission denied)
2011/3/9 Michel Dänzer daen...@debian.org On Die, 2011-03-08 at 22:00 +, Thue Janus Kristensen wrote: With both drmDropMaster breakpointed in the second server, and drmSetMaster breakpointed in the first server, drmDropMaster is called first in the second server, and the first server doesn't reach drmSetMaster until after I continue the second server from the drmDropMaster breakpoint. No crash. With only drmSetMaster breakpointed in the first server, but the second server still running with gdb attached for consistency, there is no crash when I continue the first server from the drmSetMaster breakpoint. With both servers running inside gdb, but no breakpoints, it crashes. So, apparently the problem is that drmSetMaster runs 'too early'... How about if you only set a breakpoint on drmDropMaster in the second server, and on hitting it just 'finish' the function before continuing. Does the first server hit drmSetMaster before drmDropMaster has finished in the second one? Will try when I get home. BTW, did you also get any SIGUSR1 or other signals in either server while doing this? If so, did you do the same for them as for SIGPIPE, to prevent them from influencing the timing between drmDrop/SetMaster? Yes, there were a number of other signals I had to stop gdb from breaking on. Regards, Thue
Bug#616389: xserver-xorg-video-radeon: Crashes when closing graphical VT ((EE) RADEON(0): failed to set mode: Permission denied)
2011/3/9 Michel Dänzer daen...@debian.org On Die, 2011-03-08 at 22:00 +, Thue Janus Kristensen wrote: With both drmDropMaster breakpointed in the second server, and drmSetMaster breakpointed in the first server, drmDropMaster is called first in the second server, and the first server doesn't reach drmSetMaster until after I continue the second server from the drmDropMaster breakpoint. No crash. With only drmSetMaster breakpointed in the first server, but the second server still running with gdb attached for consistency, there is no crash when I continue the first server from the drmSetMaster breakpoint. With both servers running inside gdb, but no breakpoints, it crashes. So, apparently the problem is that drmSetMaster runs 'too early'... How about if you only set a breakpoint on drmDropMaster in the second server, and on hitting it just 'finish' the function before continuing. Does the first server hit drmSetMaster before drmDropMaster has finished in the second one? No. Nothing happens even after I finish in the second server. Only when I continue after the drmDropMaster finish, does the first server hit the drmSetMaster breakpoint (or crash if there is no drmSetMaster breakpoint). Regards, Thue
Bug#616389: xserver-xorg-video-radeon: Crashes when closing graphical VT ((EE) RADEON(0): failed to set mode: Permission denied)
I am behind a NAT from my ISP. Would you be able to access a ssh server if I installed the miredo package (ipv6 tunneling)? (you could perhaps use the miredo package yourself) Regards, Thue 2011/3/8 Michel Dänzer daen...@debian.org On Sam, 2011-03-05 at 18:36 +, Thue Janus Kristensen wrote: As far as I can tell, there is nothing interesting in kdm.log or Xorg.1.log (both attached, for a newly generated crash). Would be interesting if one of you guys could (from a remote login) attach gdb to both X servers and check that the second X server calls drmDropMaster() or dies before the first X server calls drmSetMaster(). -- Earthling Michel Dänzer |http://www.vmware.com Libre software enthusiast | Debian, X and DRI developer
Bug#616389: xserver-xorg-video-radeon: Crashes when closing graphical VT ((EE) RADEON(0): failed to set mode: Permission denied)
I just tried, and with a gdb attached to both processes, there is no crash. I had to *continue* over some SIGPIPE etc, but I assume that is normal. So I assume that the problem is some kind of race condition? As I said, it is 100% reproducible until I tried it in gdb :). Regards, Thue 2011/3/8 Michel Dänzer daen...@debian.org On Sam, 2011-03-05 at 18:36 +, Thue Janus Kristensen wrote: As far as I can tell, there is nothing interesting in kdm.log or Xorg.1.log (both attached, for a newly generated crash). Would be interesting if one of you guys could (from a remote login) attach gdb to both X servers and check that the second X server calls drmDropMaster() or dies before the first X server calls drmSetMaster(). -- Earthling Michel Dänzer |http://www.vmware.com Libre software enthusiast | Debian, X and DRI developer
Bug#616389: xserver-xorg-video-radeon: Crashes when closing graphical VT ((EE) RADEON(0): failed to set mode: Permission denied)
Thanks to the gdb guru :). With both drmDropMaster breakpointed in the second server, and drmSetMaster breakpointed in the first server, drmDropMaster is called first in the second server, and the first server doesn't reach drmSetMaster until after I continue the second server from the drmDropMaster breakpoint. No crash. With only drmSetMaster breakpointed in the first server, but the second server still running with gdb attached for consistency, there is no crash when I continue the first server from the drmSetMaster breakpoint. With both servers running inside gdb, but no breakpoints, it crashes. Hilsen Thue 2011/3/8 Julien Cristau jcris...@debian.org On Tue, Mar 8, 2011 at 20:31:34 +, Thue Janus Kristensen wrote: I just tried, and with a gdb attached to both processes, there is no crash. I had to *continue* over some SIGPIPE etc, but I assume that is normal. Yes, you want 'handle SIGPIPE nostop noprint' in gdb. Cheers, Julien
Bug#597073: chromium-browser: Images are inappropriately upscaled
Ah - it seems that image scaling is a site-wide setting, with all the images from imgur scaled using the same scaling forever, once I scaled one of them. I had not figured that out. Thanks for the tip :). Whether it is a bug, you can decide. Regards, Thue On Tue, Nov 9, 2010 at 2:58 AM, Jonathan Nieder jrnie...@gmail.com wrote: clone 597073 -1 tags -1 + upstream severity -1 wishlist retitle -1 chromium-browser: not easy to get back to 1:1 scaling after using ctrl-plus/ctrl-minus quit Hi Thue, Thue Janus Kristensen wrote: Looking at fx http://i.imgur.com/I0qRG.png , the image is displayed 1pixel-1pixel in fx Firefox, or Chrome on Windows. But in chromium-browser, the browser chooses to scale it to some non-handy resolution, at least x3 its native resolution. Which is very annoying when you can only see 1/3 of the image at one time, when the whole native image resolution would fit in the browser window. When the hover the cursor, it shows a magnifying glass with a plus in it. When I left-click the image, it scale the image up to something like x9 its native resolution. Not really what I needed. You can scale images with the Ctrl-plus and Ctrl+minus bindings. Is this a pristine setup or was something scaled previously? It would be nice to be able to easily set scaling to 1:1. Cloning the bug for that. Thanks for reporting, and sorry for the slow response, Jonathan
Bug#597073: chromium-browser: Images are inappropriately upscaled
Package: chromium-browser Version: 6.0.472.53~r57914-3 Severity: normal Looking at fx http://i.imgur.com/I0qRG.png , the image is displayed 1pixel-1pixel in fx Firefox, or Chrome on Windows. But in chromium-browser, the browser chooses to scale it to some non-handy resolution, at least x3 its native resolution. Which is very annoying when you can only see 1/3 of the image at one time, when the whole native image resolution would fit in the browser window. When the hover the cursor, it shows a magnifying glass with a plus in it. When I left-click the image, it scale the image up to something like x9 its native resolution. Not really what I needed. Regardsm Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages chromium-browser depends on: ii chromium-browser-ins 6.0.472.53~r57914-3 page inspector for the chromium-br ii libasound2 1.0.23-1shared library for ALSA applicatio ii libatk1.0-0 1.30.0-1The ATK accessibility toolkit ii libbz2-1.0 1.0.5-5 high-quality block-sorting file co ii libc62.11.2-6Embedded GNU C Library: Shared lib ii libcairo21.8.10-6The Cairo 2D vector graphics libra ii libcups2 1.4.4-4 Common UNIX Printing System(tm) - ii libdbus-1-3 1.2.24-3simple interprocess messaging syst ii libdbus-glib-1-2 0.88-2 simple interprocess messaging syst ii libevent-1.4-2 1.4.13-stable-1 An asynchronous event notification ii libexpat12.0.1-7 XML parsing C library - runtime li ii libfontconfig1 2.8.0-2.1 generic font configuration library ii libfreetype6 2.4.2-2 FreeType 2 font engine, shared lib ii libgcc1 1:4.4.4-14 GCC support library ii libgconf2-4 2.28.1-3GNOME configuration database syste ii libgcrypt11 1.4.5-2 LGPL Crypto library - runtime libr ii libgl1-mesa-glx [lib 7.7.1-4 A free implementation of the OpenG ii libglewmx1.5 1.5.4-1 The OpenGL Extension Wrangler - ru ii libglib2.0-0 2.24.2-1The GLib library of C routines ii libgtk2.0-0 2.20.1-1+b1 The GTK+ graphical user interface ii libicu44 4.4.1-6 International Components for Unico ii libjpeg626b1-1 The Independent JPEG Group's JPEG ii libnspr4-0d 4.8.6-1 NetScape Portable Runtime Library ii libnss3-1d 3.12.7-1Network Security Service libraries ii libpango1.0-01.28.1-1Layout and rendering of internatio ii libpng12-0 1.2.44-1PNG library - runtime ii libstdc++6 4.4.4-14The GNU Standard C++ Library v3 ii libv8-2.2.24 2.2.24-5V8 JavaScript Engine ii libvpx0 0.9.1-1 VP8 video codec (shared library) ii libx11-6 2:1.3.3-3 X11 client-side library ii libxext6 2:1.1.2-1 X11 miscellaneous extension librar ii libxml2 2.7.7.dfsg-4GNOME XML library ii libxrender1 1:0.9.6-1 X Rendering Extension client libra ii libxslt1.1 1.1.26-6XSLT 1.0 processing library - runt ii libxss1 1:1.2.0-2 X11 Screen Saver extension library ii xdg-utils1.0.2+cvs20100307-2 desktop integration utilities from ii zlib1g 1:1.2.3.4.dfsg-3compression library - runtime chromium-browser recommends no packages. Versions of packages chromium-browser suggests: pn chromium-browser-l10n none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#539740: Please test with current version
Yes, still broken. Regards, Thue On Fri, Jul 2, 2010 at 6:22 PM, Jan Dittberner ja...@debian.org wrote: Could you please test whether this still happens using the current version from testing/unstable? Regards Jan Dittberner -- Jan Dittberner - Debian Developer GPG-key: 4096R/558FB8DD 2009-05-10 B2FF 1D95 CE8F 7A22 DF4C F09B A73E 0055 558F B8DD http://ddportfolio.debian.net/ - http://people.debian.org/~jandd/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.10 (GNU/Linux) iQIcBAEBCAAGBQJMLhJaAAoJEKc+AFVVj7jdbpUP/2GlfAGD9tEnTTW9v10AOWv1 TigV66v4yAeeeZt60+RMfdKI1jXKx/hzvqkkO2yoop8cXR50krWh37fU14N+kV+w T9wNwi3UscDLGmVPs/mM8YAVecXfalKdr55qvWtWdkbId/2y0PGx9Od4f2dNQtxv tom2G8LnURXEDXdFdsZiKVnJAnHoDStdi0k99+sYBQy4Hd6InjCpOuKn2Rqvfoq/ /5GPocAHJ1FmMZT5VVij1ZolFOpG5Dsw1vUAJSrszvudAWJ6HVjv9AIyg7XNbTAZ pnt4W2naCpRVPcewfQx24x2sAzUZNNk0bpG0dVQ6M9kzoeC7vHRLAzTikyYbfedl 9gHEGCBdyl6RgxVddHaWnsRm9PuCYK6TnAdW4sYGYjdjKD7BBoyzalaYacV03aJ6 YabUojvv7/CByK63Cgzx/NRIDsd6uxMI17f5fqF8t1cyEchz8rsLv2Bg/JUlndHT WTVpSxJu6CQ1MiAslSUw4hfnKy+O5Xu6+sH/MF7y+IbFjyNcRvJeL8T8MjzbeVIx M5Nm90JlJOohYPuMGaRMPiA7t+IcPzV1soL/SPpXOb45XBz8w7Tk2ZESSHqSbY16 7vEMop0IgqlKgUHuQ3HreGGh5CnGfN2j/bhIdr9NL3DRksP6ILaQMZ5igUlNOzYg eSBlJgAUsGNECLmIqlO8 =Uo9q -END PGP SIGNATURE-
Bug#588868: sysv-rc: update-rc.d should support empty Default-Start
Package: sysv-rc Version: 2.88dsf-11 Severity: important I have a backup script on my desktop PC, which should run only on system shutdown (runlevel 0). So I have written /etc/init.d/backup-thuehome.sh , with an LSB header including # Default-Start: # Default-Stop: 0 But when I try to use it, it fails because the init system won't accept an empty Default-Start. For example running update-rc.d with an empty Default-State, or removing Default-Start completely, gives me: t...@h ~ sudo update-rc.d backup-thuehome.sh enable update-rc.d: using dependency based boot sequencing update-rc.d: error: backup-thuehome.sh Default-Start contains no runlevels, aborting. Even worse, when manually adding a symlink to /etc/rc0.d , then the script silently refuses to run, without an error being logged to syslog or the console! (this part is why I added the important severity. Error handling feedback is very important!) My init scipt works fine if a add for example # Default-Start:3 Regards Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages sysv-rc depends on: ii debconf [debconf-2.0] 1.5.33 Debian configuration management sy ii insserv 1.14.0-2 Tool to organize boot sequence usi ii sysvinit-utils2.88dsf-11 System-V-like utilities Versions of packages sysv-rc recommends: ii lsb-base 3.2-23.1 Linux Standard Base 3.2 init scrip Versions of packages sysv-rc suggests: pn bum none (no description available) pn sysv-rc-conf none (no description available) -- debconf information: sysv-rc/unable-to-convert: * sysv-rc/convert-legacy: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#587809: kde-window-manager: Fails to display windows correctly when leaving full-screen
Package: kde-window-manager Version: 4:4.4.4-1 Severity: normal I have a dual-screen setup. When I 1) put a kaffeine window into fullscreen (by double-clicking on it) 2) then leave fullscreen again by double-clicking on the kaffeine window Then the other windows behind the kaffeine window, which should now be visible, are not correctly displayed. I recorded the error occurring here, using a maximized konsole-window as background. https://thuejk.dk/kwin_error.mov (50MB) Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages kde-window-manager depends on: ii kdebase-runtime 4:4.4.4-1 runtime components from the offici ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib ii libgl1-mesa-glx [libgl1] 7.7.1-3A free implementation of the OpenG ii libice6 2:1.0.6-1 X11 Inter-Client Exchange library ii libkdecorations4 4:4.4.4-1 library used by decorations for th ii libkdecore5 4:4.4.4-2 the KDE Platform Core Library ii libkdeui5 4:4.4.4-2 the KDE Platform User Interface Li ii libkephal44:4.4.4-1 API for easier handling of multihe ii libkio5 4:4.4.4-2 the Network-enabled File Managemen ii libknewstuff3-4 4:4.4.4-2 the Get Hot New Stuff v3 Library ii libkutils44:4.4.4-2 various utility classes for the KD ii libkwineffects1a 4:4.4.4-1 library used by effects for the KD ii libkworkspace44:4.4.4-1 library for the kdebase workspace ii libplasma34:4.4.4-2 the Plasma Library for the KDE Pla ii libqt4-dbus 4:4.6.3-1 Qt 4 D-Bus module ii libqt4-xml4:4.6.3-1 Qt 4 XML module ii libqtcore44:4.6.3-1 Qt 4 core module ii libqtgui4 4:4.6.3-1 Qt 4 GUI module ii libsm62:1.1.1-1 X11 Session Management library ii libstdc++64.4.4-6The GNU Standard C++ Library v3 ii libx11-6 2:1.3.3-3 X11 client-side library ii libxcomposite11:0.4.1-2 X11 Composite extension library ii libxdamage1 1:1.1.3-1 X11 damaged region extension libra ii libxext6 2:1.1.1-3 X11 miscellaneous extension librar ii libxfixes31:4.0.4-2 X11 miscellaneous 'fixes' extensio ii libxrandr22:1.3.0-3 X11 RandR extension library ii libxrender1 1:0.9.5-2 X Rendering Extension client libra ii perl 5.10.1-13 Larry Wall's Practical Extraction kde-window-manager recommends no packages. kde-window-manager suggests no packages. -- no debconf information Section Monitor Identifier mon0 Option LeftOf mon1 Option DPMS EndSection Section Monitor Identifier mon1 Option DPMS Option PreferredMode 1920x1200 EndSection Section Device Identifier ati Driver radeon BusID PCI:1:0:0 Option Monitor-HDMI-0 mon0 Option Monitor-DVI-0 mon1 EndSection Section Screen Identifier MyScreen Device ati DefaultDepth24 SubSection Display Depth 24 Virtual 3520 1200 EndSubSection EndSection Section ServerLayout Identifier Default Layout Screen MyScreen EndSection
Bug#587293: Plays now, but messed up
After you reported this bug fixed, the videos now plays, but are messed up. The videos worked fine for me before this stopped working due to this bug. An illustration of the problem: http://thuejk.dk/chromium_video_bug.avi The different components of the video seem to be misaligned. Original video at http://www.youtube.com/watch?v=Bho2CGcLIy8 Regards, Thue
Bug#585922: chromium-browser-inspector: Simply doesn't work
On Sun, Jun 27, 2010 at 2:44 AM, Jonathan Nieder jrnie...@gmail.com wrote: Thue Janus Kristensen wrote: When I 1) click on the magnifying glass 2) move the mouse cursor over a HTML element so that it lights up blue 3) click nothing happends. Sorry for the slow response. Unfortunately, that feature works fine for me. Any hints at reproducing this? Thanks for the report, Jonathan After clicking around a bit more, it seems that it only fails for pages using frames. There it will select the frame when you click the element. Chromium should instead select the element within the frame inside the dev pane. Hilsen Thue Regards, Thue
Bug#585922: chromium-browser-inspector: Simply doesn't work
I submitted it as http://code.google.com/p/chromium/issues/detail?id=47686 , using your formulation because I was lazy :). Regards, Thue On Sun, Jun 27, 2010 at 2:11 PM, Jonathan Nieder jrnie...@gmail.com wrote: tags 585922 - moreinfo unreproducible retitle 585922 chromium-browser-inspector: copes poorly with frames severity 585922 normal quit Thue Janus Kristensen wrote: After clicking around a bit more, it seems that it only fails for pages using frames. There it will select the frame when you click the element. Chromium should instead select the element within the frame inside the dev pane. Thanks for the clarification. Indeed, that’s true: 1. Visit http://java.sun.com/javase/7/docs/api/ 2. Select Tools → Developer → Developer Tools from the browser chrome (or press ctrl-shift-I) 3. Choose Elements from the top of the developer tools window 4. Click the black magnifying glass icon at the bottom of the developer tools window, so it turns blue 5. Click on a frame. Its frame tag gets selected. 6. Click the manifying glass icon again. 7. Click on an element within the selected frame. Even though individual elements are correctly highlighted when you hover, the inspector window refuses to automagically jump to the correct tag. Could you report this upstream through http://code.google.com/p/chromium/issues/entry?template=Defect%20on%20Linux so we can work on a fix there (and send a link to this bug log)? If you can’t because you don’t have an account or something, that’s fine, too, but please do let us know. Thanks again, Jonathan
Bug#587097: aptitude: Should not use IPv6 if no IPv6 gateway specified
Package: aptitude Version: 0.6.3-2 Severity: normal I am having problems running aptitude update because aptitude tries to use IPv6 (even through my Debian mirror also has an IPv4 address in addition to its IPv6 address). The default Debian install seems to have added a localhost IPv6 address to machine (fe80::21d:7dff:fe01:88e5/64) It would be nice if aptitude could detect that IPv6 is not really available, for example by noting that no IPv6 gateway is configured, and fall back on IPv4. Regards, Thue t...@h ~ sudo aptitude update Err http://ftp.dk.debian.org experimental Release.gpg Cannot initiate the connection to ftp.dk.debian.org:80 (2001:878:346::116). - connect (101: Network is unreachable) [IP: 2001:878:346::116 80] Err http://ftp.dk.debian.org unstable Release.gpg Cannot initiate the connection to ftp.dk.debian.org:80 (2001:878:346::116). - connect (101: Network is unreachable) [IP: 2001:878:346::116 80] Err http://ftp.dk.debian.org squeeze Release.gpg Cannot initiate the connection to ftp.dk.debian.org:80 (2001:878:346::116). - connect (101: Network is unreachable) [IP: 2001:878:346::116 80] Ign http://ftp.dk.debian.org experimental Release Get:1 http://www.debian-multimedia.org unstable Release.gpg [198B] Ign http://ftp.dk.debian.org unstable Release Ign http://ftp.dk.debian.org squeeze Release Get:2 http://www.debian-multimedia.org unstable Release [29.4kB] Hit http://security.debian.org squeeze/updates Release.gpg Ign http://ftp.dk.debian.org experimental/main Packages/DiffIndex Ign http://ftp.dk.debian.org experimental/contrib Packages/DiffIndex Ign http://ftp.dk.debian.org experimental/non-free Packages/DiffIndex Ign http://ftp.dk.debian.org unstable/main Packages/DiffIndex Hit http://security.debian.org squeeze/updates Release Ign http://ftp.dk.debian.org unstable/contrib Packages/DiffIndex Ign http://ftp.dk.debian.org unstable/non-free Packages/DiffIndex Ign http://ftp.dk.debian.org squeeze/main Sources/DiffIndex Ign http://ftp.dk.debian.org squeeze/contrib Sources/DiffIndex Get:3 http://www.debian-multimedia.org unstable/main Packages/DiffIndex [2023B] Ign http://ftp.dk.debian.org squeeze/non-free Sources/DiffIndex Ign http://security.debian.org squeeze/updates/main Packages/DiffIndex Ign http://ftp.dk.debian.org experimental/main Packages Get:4 http://www.debian-multimedia.org unstable/main 2010-06-25-1054.05.pdiff [1000B] Ign http://ftp.dk.debian.org experimental/contrib Packages Get:5 http://www.debian-multimedia.org unstable/main 2010-06-25-1054.05.pdiff [1000B] Ign http://ftp.dk.debian.org experimental/non-free Packages Ign http://ftp.dk.debian.org unstable/main Packages Get:6 http://www.debian-multimedia.org unstable/main 2010-06-25-1054.05.pdiff [1000B] Ign http://security.debian.org squeeze/updates/contrib Packages/DiffIndex Ign http://security.debian.org squeeze/updates/main Sources/DiffIndex Ign http://security.debian.org squeeze/updates/contrib Sources/DiffIndex Ign http://ftp.dk.debian.org unstable/contrib Packages Ign http://ftp.dk.debian.org unstable/non-free Packages Ign http://ftp.dk.debian.org squeeze/main Sources Ign http://ftp.dk.debian.org squeeze/contrib Sources Hit http://security.debian.org squeeze/updates/main Packages Hit http://security.debian.org squeeze/updates/contrib Packages Ign http://ftp.dk.debian.org squeeze/non-free Sources Ign http://ftp.dk.debian.org experimental/main Packages Ign http://ftp.dk.debian.org experimental/contrib Packages Hit http://security.debian.org squeeze/updates/main Sources Ign http://ftp.dk.debian.org experimental/non-free Packages Ign http://ftp.dk.debian.org unstable/main Packages Ign http://ftp.dk.debian.org unstable/contrib Packages Hit http://security.debian.org squeeze/updates/contrib Sources Ign http://ftp.dk.debian.org unstable/non-free Packages Ign http://ftp.dk.debian.org squeeze/main Sources Ign http://ftp.dk.debian.org squeeze/contrib Sources Ign
Bug#587097: Scratch that
Scratch that bug. It seems to be a misconfiguration on the Debian mirror, where the Advertised IPv4 address did not work. So aptitude is working correctly. Regards, Thue
Bug#585922: chromium-browser-inspector: Simply doesn't work
Package: chromium-browser-inspector Version: 5.0.375.70~r48679-2 Severity: important When I 1) click on the magnifying glass 2) move the mouse cursor over a HTML element so that it lights up blue 3) click nothing happends. I would expect that it would actually work like demonstrated in the video http://www.youtube.com/watch?v=Mhb4n0yGYT4 . Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash chromium-browser-inspector depends on no packages. Versions of packages chromium-browser-inspector recommends: ii chromium-browser 5.0.375.70~r48679-2 Chromium browser chromium-browser-inspector suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#575705: closed by Ulises Vitulli der...@debian.org (Bug#575705: fixed in openntpd 3.9p1+debian-4)
On Tue, Jun 8, 2010 at 11:45 PM, Debian Bug Tracking System ow...@bugs.debian.org wrote: * Enhance ntpd.conf manpage to verbosely remember we don't listen to any by default (Closes: #575705). That change has little relation to this bug report. I wanted to explicitly say _what_ we listen for, not that we don't listen by default. Besides, with your change there now are two almost identical sentences saying OpenNTPd on Debian *does not listen* on any address inside the listen on address description inside man ntpd.conf. Regards, Thue
Bug#575705: closed by Ulises Vitulli der...@debian.org (Bug#575705: fixed in openntpd 3.9p1+debian-4)
On Thu, Jun 10, 2010 at 12:33 AM, Ulises Vitulli der...@debian.org wrote: On 09/06/10 19:19, Thue Janus Kristensen wrote: On Tue, Jun 8, 2010 at 11:45 PM, Debian Bug Tracking System ow...@bugs.debian.org wrote: * Enhance ntpd.conf manpage to verbosely remember we don't listen to any by default (Closes: #575705). That change has little relation to this bug report. I wanted to explicitly say _what_ we listen for, not that we don't listen by default. Besides, with your change there now are two almost identical sentences saying OpenNTPd on Debian *does not listen* on any address inside the listen on address description inside man ntpd.conf. Regards, Thue Hi Thue Janus Kristensen! I don't really follow what you're trying to mean... If It says does not listen on any, could it be grammatically possible that there are some that do listen ? Your formulation is fine. I merely suggest that the same statement is not repeated twice within 5 lines. :) Sorry if I misunderstood the first bug report, I offer my apologizes and I kindly request you to tell me what would you like the manpage to say instead. I suggested a formulation for the man page in the initial bug report; see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=575705 Greetings, Dererk Regards, Thue
Bug#422594: Now works
This bug is fixed for me in the current version of Kaffeine. Regards, Thue
Bug#547925: Fixed
This bug is now fixed for me in the current version of Kaffeine. Regards, Thue
Bug#577720: mysql-server-5.1: /etc/init.d/mysql still tries to start after uninstall
Package: mysql-server-5.1 Severity: normal mysql-server-5.1 was automatically uninstalled during a routine unstable aptitude upgrade. This left /etc/init.d/mysql behind, which I understand is in accordance with Debian policy for configuration files. However, /etc/init.d/mysql still tries to start mysql, without realizing that the binaries are not longer present. Specifically, it dies trying to run /usr/bin/mysqladmin . The /etc/init.d/mysql script should do what other similar packages do, and silently exit when it detects that it is not installed. Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-4-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages mysql-server-5.1 depends on: ii adduser 3.112add and remove users and groups ii debconf [debconf-2.0] 1.5.31 Debian configuration management sy ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib pn libdbi-perl none (no description available) ii libgcc1 1:4.4.3-7GCC support library ii libmysqlclient165.1.45-3 MySQL database client library ii libstdc++6 4.4.3-7 The GNU Standard C++ Library v3 ii libwrap07.6.q-18 Wietse Venema's TCP wrappers libra ii lsb-base3.2-23 Linux Standard Base 3.2 init scrip pn mysql-client-5.1none (no description available) ii mysql-common5.1.45-3 MySQL database common files, e.g. ii passwd 1:4.1.4.2-1 change and administer password and ii perl5.10.1-12Larry Wall's Practical Extraction ii psmisc 22.11-1 utilities that use the proc file s ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime Versions of packages mysql-server-5.1 recommends: ii bsd-mailx [mailx] 8.1.2-0.20100314cvs-1 simple mail user agent pn libhtml-template-p none(no description available) Versions of packages mysql-server-5.1 suggests: pn tinycanone (no description available) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#415994: How is this supposed to work?
The exploit is at http://www.gossamer-threads.com/lists/fulldisc/full-disclosure/49421 This seems to be a (very) false alarm. How does having a $filename argument in a function in a file containing only a class cause the function to be called when the file is called with a $_GET filename=... argument? Even if register_globals was enabled, this will obviously not call the function. And the scope of the function would make the name clash harmless. So in short, the vulnerability author Sp1deR_NeT has zero clue. And I wonder why this Debian bug has not been closed already. Hilsen Thue
Bug#461006: Unfixable
I looked around the Smarty source code, and this looks unfixable. There are 2 problems -default_modifiers only handles one level of arrays. This could probably be fixed -default_modifiers are applied both in the foreach from-argument, and when the text is actually inserted ({$para.text}). So everything would be double-escaped. This could not be fixed without potentially breaking current users relying on the current behavior. Regards, Thue
Bug#575698: ntpdate: -v should return more info on failures
Package: ntpdate Version: 1:4.2.6+dfsg-1 Severity: wishlist Compare the output of ntpdate and openntpd -d, both used against the same server t...@h ~ sudo ntpdate -v ntp 28 Mar 14:45:41 ntpdate[3636]: ntpdate 4@1.2089-o Mon Feb 8 19:06:27 UTC 2010 (1) 28 Mar 14:45:41 ntpdate[3636]: no server suitable for synchronization found t...@h ~ sudo openntpd -d ntp engine ready reply from 83.221.148.2: not synced, next query 640s ntpdate just says no servers, while openntpd actually says why the server could not be used. It would obviously be nice if ntpdate output was as useful as openntpd output. Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-4-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages ntpdate depends on: ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib ii libcap2 1:2.17-2 support for getting/setting POSIX. ii libssl0.9.8 0.9.8m-2 SSL shared libraries ii netbase 4.40 Basic TCP/IP networking system Versions of packages ntpdate recommends: ii lockfile-progs0.1.13 Programs for locking and unlocking ntpdate suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#575705: openntpd: ntpd.conf and its man page should be more explicit about the listen configuration
Package: openntpd Version: 3.9p1+debian-3 Severity: minor ntpd.conf says # Addresses to listen on (ntpd does not listen by default) and man ntpd.conf says listen on address Specify a local IP address or a hostname the ntpd(8) daemon should listen on. but nowhere does it explicitly say what it will actually listen for. This may be obvious to a Debian openntp maintainer, but it would be nice if it was immediately obvious to people who haven't used ntp before too So I suggest that the ntpd.conf entry be changed to # Act as an ntp server by listening to queries from these IP addresses/DNS hostnames And that man ntpd.conf be changed to listen on address The ntpd(8) daemon will act as an ntp server by listening to queries from this address. address can be either an IP address or a DNS hostname. Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-4-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages openntpd depends on: ii adduser 3.112 add and remove users and groups ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib ii libssl0.9.8 0.9.8m-2 SSL shared libraries openntpd recommends no packages. openntpd suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#575244: xserver-xorg: Segmentation fault
Package: xserver-xorg Version: 1:7.5+5 Severity: normal I got this segmentation fault while trying to set up dual screens with the radeon driver. I don't know how much sense my xorg.conf makes, but I don't think the xserver should segfault in any case. Regards, Thue PS: is there a debian tool to generate a dual screen xorg.conf automatically? -- Package-specific info: /var/lib/x11/X.roster does not exist. /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 Nov 13 18:46 /etc/X11/X - /usr/bin/Xorg -rwxr-xr-x 1 root root 1866784 Mar 23 17:10 /usr/bin/Xorg /var/lib/x11/xorg.conf.roster does not exist. VGA-compatible devices on PCI bus: 01:00.0 VGA compatible controller: ATI Technologies Inc RV670PRO [Radeon HD 3850] /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw-r--r-- 1 root root 709 Mar 24 14:37 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: Section Monitor Identifier mon1 Option DPMS EndSection Section Monitor Identifier mon2 Option DPMS EndSection Section Device Identifier ati0 Driver radeon Screen 0 EndSection Section Device Identifier ati1 Driver radeon Screen 1 EndSection Section Screen Identifier Screen0 Device ati0 DefaultDepth24 SubSection Display Depth 24 Modes 1600x1200 EndSubSection EndSection Section Screen Identifier Screen1 Device ati1 DefaultDepth24 SubSection Display Depth 24 Modes 1600x1200 EndSubSection EndSection Section ServerLayout Identifier Default Layout Screen 0 Screen0 Screen 1 Screen1 RightOf Screen0 EndSection Xorg X server log files on system: -rw-r--r-- 1 root root 77398 Mar 23 02:21 /var/log/Xorg.1.log -rw-r--r-- 1 root root 44246 Mar 24 14:38 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.26-2-amd64 x86_64 Debian Current Operating System: Linux thue-desktop 2.6.32-3-amd64 #1 SMP Wed Feb 24 18:07:42 UTC 2010 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-3-amd64 root=UUID=a595-b7e1-4229-a6a4-db218f82f092 ro quiet Build Date: 23 March 2010 04:00:24PM xorg-server 2:1.7.6-1 (Cyril Brulebois k...@debian.org) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Wed Mar 24 14:38:37 2010 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor default monitor (**) | |--Device ati0 (==) No monitor specified for screen Screen0. Using a default monitor configuration. (**) |--Screen Screen1 (1) (**) | |--Monitor default monitor (**) | |--Device ati1 (==) No monitor specified for screen Screen1. Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory /usr/share/fonts/X11/cyrillic does not exist. Entry deleted from font path. (WW) The directory /usr/share/fonts/X11/100dpi/ does not exist. Entry deleted from font path. (WW) The directory /usr/share/fonts/X11/75dpi/ does not exist. Entry deleted from font path. (WW) The directory /usr/share/fonts/X11/100dpi does not exist. Entry deleted from font path. (WW) The directory /usr/share/fonts/X11/75dpi does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to /usr/lib/xorg/modules (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. (II) Loader magic: 0x7c3240 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (++) using VT number 7 (--) PCI:*(0:1:0:0) 1002:9505:1043:0234 ATI Technologies Inc RV670PRO [Radeon HD 3850] rev 0, Mem @ 0xe000/268435456, 0xf500/65536, I/O @ 0xb000/256, BIOS @ 0x/131072 (II) Open ACPI successful (/var/run/acpid.socket) (II) LoadModule: extmod (II) Loading
Bug#575244: xserver-xorg: Segmentation fault
On Wed, Mar 24, 2010 at 4:06 PM, Brice Goglin brice.gog...@ens-lyon.orgwrote: Thue Janus Kristensen wrote: On Wed, Mar 24, 2010 at 3:15 PM, Brice Goglin brice.gog...@ens-lyon.org mailto:brice.gog...@ens-lyon.org wrote: Thue Janus Kristensen wrote: Package: xserver-xorg Version: 1:7.5+5 Severity: normal I got this segmentation fault while trying to set up dual screens with the radeon driver. I don't know how much sense my xorg.conf makes It doesn't make any sense as of today. You're trying to use the old Xinerama syntax. You want to use RandR1.2 instead. See http://wiki.debian.org/XStrikeForce/HowToRandR12 I have already tried generating a config based on that HOWTO, but it doesn't work. Even though I have xorg.conf Section Device Identifier ati Driver radeon BusID PCI:1:0:0 Option HDMI-0 mon0 Option DVI-0 mon1 EndSection It should be Monitor-HDMI-0 instead of HDMI-0 and so on. Or just remove these lines and rename your monitor section's identifier from mon0 to HDMI-0 and so on. If the wiki page isn't clear enough, please let me know. Ah excellent - it works now! Having the output name inside the option name in that way is slightly unexpected, at least for me. Hence it tricked me, as I was mostly looking at the finished example. But yes, it does say how it works up in the device section section. Thanks! Regards, Thue
Bug#575148: xserver-xorg-video-radeonhd: Everything is suddenly very slow
On Wed, Mar 24, 2010 at 2:44 AM, Cyril Brulebois k...@debian.org wrote: [...] Thue Janus Kristensen thu...@gmail.com (23/03/2010): See the drm-related dmesg lines in your bugreport, that's probably not helping: without working direct rendering, it's “““normal””” to have a slow browser. :/ Nonetheless, it worked before the last update. I missed the fact you're running a severely outdated kernel, please upgrade it and see how it goes. See details in: http://bgoglin.livejournal.com/19868.html Yes, several months old. The horror! :) Side note: Actually, for following the latest Kernel I have installed package linux-image-2.6-amd64, which in its description says This package depends on the latest Linux kernel 2.6 and modules But right now it still depends on linux-image-2.6.32-3-amd64 in unstable. I just upgraded to 2.6.32-4 manually, and it did not fix the slowness. But thanks to Brice Goglin's help and the x.org HOWTO wiki I just got dual screen working with the radeon driver, so in principle I do not care any more :). Regards, Thue
Bug#575264: linux-image-2.6-amd64: This package depends on 2.6.32-3, but 2.6.32-4 is the latest
Package: linux-image-2.6-amd64 Version: 2.6.32+25 Severity: normal linux-image-2.6-amd64 currently depends on linux-image-2.6.32-3-amd64, but it should in theory depend on linux-image-2.6.32-4-amd64, which is the latest Linux version available in Debian. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-4-amd64 (SMP w/4 CPU cores) Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6-amd64 depends on: ii linux-image-2.6.32-3-amd642.6.32-9 Linux 2.6.32 for 64-bit PCs linux-image-2.6-amd64 recommends no packages. linux-image-2.6-amd64 suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#575148: xserver-xorg-video-radeonhd: Everything is suddenly very slow
On Tue, Mar 23, 2010 at 10:26 PM, Cyril Brulebois k...@debian.org wrote: Hi. Thue Janus Kristensen thu...@gmail.com (23/03/2010): After a recent aptitude upgrade, my desktop is suddenly very slow. For example, there is no smooth scrolling in Firefox. I am not sure which upgrade did it, but am filing a bug here as my best guess. AFAICT -radeonhd isn't really maintained, you may want to give -radeon a try. Yes, fair enough. But with -radeon dual screen doesn't work in KDE :(. So I thought I would mention it anyway, on the off chance that it would get fixed :). But as I said, fair enough if you don't give it priority. I notice that there have recently come a new warning in my Xorg log: (WW) RADEONHD(0): [drm] failed to enable new memory map This may or may not be relevant. The old Xorg.1.log.old is attached. See the drm-related dmesg lines in your bugreport, that's probably not helping: without working direct rendering, it's “““normal””” to have a slow browser. :/ Nonetheless, it worked before the last update. Regards, Thue
Bug#568751: Works now
This bug seems to no longer be present on my computer. Regards, Thue
Bug#568751: xserver-xorg-video-radeonhd: Colors are messed up after virtual console change
On Sun, Feb 7, 2010 at 5:39 PM, Brice Goglin brice.gog...@ens-lyon.orgwrote: Thue Janus Kristensen wrote: Package: xserver-xorg-video-radeonhd Version: 1.3.0-2 Severity: important When I change to another virtual console, fx CTRL-ALT-F1, and then back CRTL-ALT-F7, the colors are messed up. It also messes up in the same way if I use the switch user functionality to start a second graphical console on CTRL-ALT-F8, and then switch back to CTRL-ALT-F7. Logging out of KDE and restarting the X server from the KDM menu fixes it. I made a (143MB big) video to illustrate it: http://www.thuejk.dk/radeonhd_bug_143MB.avi I tried the radeon driver instead of the radeonhd driver, but I couldn't get the radeon driver to work with my dual-screen setup. radeon is the way to go, so I would rather work on making radeon work. Fair enough. But it used to work until a few weeks ago :(. Regards, Thue
Bug#561693: I have the same problem
I have the same problem. Doing sudo aptitude purge sun-java6-jre sun-java6-bin sun-java6-plugin sun-java6-fonts java-common and then installing 6-16-1 versions did NOT fix it. Regards, Thue
Bug#547925: kaffeine: Does not like file name with spaces
Package: kaffeine Version: 0.8.7-1 Severity: normal I have a file named LotR 1 disk 1.iso. When I try to open it from inside Kaffeine, using the DVD iso image file type, I get the popup error The source can't be read. Maybe you don't have enough rights for this, or source doesn't contain data (e.g: no disk in drive). (/data/film/LotR_1_EE/LotR%201%20disk%201.iso) It works fine if I rename the file to for example test.iso. My guess on the error is that the spaces in the filename seem to be urlencoded by kaffeine (as %20), and then used on the command line, when they should perhaps be command line arg escaped as \ . The command line output from kaffeine is t...@h /data/film/LotR_1_EE libdvdnav: Using dvdnav version 1.1.16.3 from http://xine.sf.net libdvdread: Using libdvdcss version 1.2.10 for DVD access libdvdread: Can't stat /data/film/LotR_1_EE/LotR%201%20disk%201.iso No such file or directory libdvdnav: vm: faild to open/read the DVD Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages kaffeine depends on: ii hdparm 9.15-1 tune hard disk parameters for high ii kdelibs4c2a 4:3.5.10.dfsg.1-2+b1 core libraries and binaries for al ii libc6 2.9-25 GNU C Library: Shared libraries ii libcdparanoia0 3.10.2+debian-8 audio extraction tool for sampling ii libgcc1 1:4.4.1-3GCC support library ii libogg0 1.1.4~dfsg-1 Ogg bitstream library ii libqt3-mt 3:3.3.8b-6 Qt GUI Library (Threaded runtime v ii libstdc++6 4.4.1-3 The GNU Standard C++ Library v3 ii libvorbis0a 1.2.0.dfsg-6 The Vorbis General Audio Compressi ii libvorbisenc2 1.2.0.dfsg-6 The Vorbis General Audio Compressi ii libx11-62:1.2.2-1X11 client-side library ii libxcb1 1.4-1X C Binding ii libxext62:1.0.4-1X11 miscellaneous extension librar ii libxine11.1.16.3-1+b2the xine video/media player librar ii libxine1-ffmpeg 1.1.16.3-1+b2MPEG-related plugins for libxine1 ii libxine1-x 1.1.16.3-1+b2X desktop video output plugins for ii libxinerama12:1.0.3-2X11 Xinerama extension library ii libxtst62:1.0.3-1X11 Testing -- Resource extension kaffeine recommends no packages. kaffeine suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#547422: kmix: Kicker applet sometimes stuck open
Package: kmix Version: 4:4.3.1-1 Severity: normal Normally, you can open and close a master volumen slider by clicking the loudspeaker icon in the main kde bar. However, sometimes it gets stuck in open. I haven't been able to figure out when this happens, but it happens relatively often. Repeatably clicking on it while it is not glitched does not trigger it, however. Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages kmix depends on: ii kdebase-runtime 4:4.3.1-1 runtime components from the offici ii kdelibs5 4:4.3.1-1 core libraries for all KDE 4 appli ii libasound21.0.20-4 shared library for ALSA applicatio ii libc6 2.9-25 GNU C Library: Shared libraries ii libglib2.0-0 2.20.5-1 The GLib library of C routines ii libknotificationitem-1-1 4:4.3.1-1 library for new way of handling sy ii libphonon44:4.5.2-2 Qt 4 Phonon module ii libpulse-mainloop-glib0 0.9.15-4.1 PulseAudio client libraries (glib ii libpulse0 0.9.15-4.1 PulseAudio client libraries ii libqt4-dbus 4:4.5.2-2 Qt 4 D-Bus module ii libqt4-xml4:4.5.2-2 Qt 4 XML module ii libqtcore44:4.5.2-2 Qt 4 core module ii libqtgui4 4:4.5.2-2 Qt 4 GUI module ii libstdc++64.4.1-3The GNU Standard C++ Library v3 ii phonon4:4.5.2-2 Qt 4 Phonon module metapackage kmix recommends no packages. kmix suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525645: deluge: Peers not shown
Seems to work now, yes :). Regards, Thue On Wed, Sep 2, 2009 at 3:38 PM, Cristian Greco cristian.deb...@gmail.comwrote: On Sun, Apr 26, 2009 at 12:34:35PM +0200, Thue Janus Kristensen wrote: Package: deluge Version: 1.1.6+dfsg-2 Severity: normal In the Peers tab in the lower pane for an active torrent, the current version of deluge sometimes randomly (most of the time) does not show the list of active peers. This worked fine in deluge before the rewrite. Hi Thue, could you please confirmi this bug disappeared in latest version (1.1.9)? Thanks, -- Cristian Greco GPG key ID: 0x0C095825 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAkqedW8ACgkQdYzA9QwJWCWLHACdH9Nb6wjnLjfwjn/R3iED2wse +N0AoLV+Iz76byvtI41PVQmZVTYV1ZvC =CBKG -END PGP SIGNATURE-
Bug#525647: deluge: Should register itself as bittorrent handler
My motivation has dropped somewhat, as I switched to ktorrent :). But it seems that it is not only deluge that has the problem; it is the same for ktorrent. At the same time, konqueror seems to be able to use the system applications correctly. So it would seem to be more of an Iceweasel should be better at recognizing and suggesting helper applications in general problem. Feel free to close the bug, as far as I am concerned, since it is an iceweasel problem, and not a problem with deluge. Regards, Thue On Wed, Sep 2, 2009 at 3:41 PM, Cristian Greco cristian.deb...@gmail.comwrote: On Sun, Apr 26, 2009 at 12:44:27PM +0200, Thue Janus Kristensen wrote: Package: deluge Version: 1.1.6+dfsg-2 Severity: normal By default, deluge is not shown in the dialogue Firefox pops up when opening a .torrent file, while another bittorrent client is. I assume there is somewhere in the Debian system where deluge can register itself as a bittorrent handler, so that Firefox recognizes it. The Deluge package should do so :). Hi Thue, did you manage to fix this behaviour on your system or are you still able to reproduce it? Could you please submit more informations, in any case? Thanks, -- Cristian Greco GPG key ID: 0x0C095825 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAkqedggACgkQdYzA9QwJWCVEJwCcDGXJdjm41DBglwpsPFEv34k1 /80AnjhX5G7BIBAEVZ1CtZfttBziCr/1 =Kd4l -END PGP SIGNATURE-
Bug#539740: dosbox: Fullscreen messes up extended desktop
Package: dosbox Version: 0.72-1.1 Severity: normal I have a desktop extended over 2 monitors. Until I enter and exit dosbox fullscreen mode :). When dosbox goes into fullscreen it changes the resolution (of course), and sets the screens to mirroring. The mirroring part is fair enough, I guess, though it could just as well only use one of the monitors. However, when dosbox exits fullscreen the screens are still mirrored, instead of restoring my previous setup. KDE still thinks that the desktop is full extended size, and the mouse will happily move off the right edge of the screen. Logging out and in again restores the extended desktop. Obviously dosbox should restore the previous settings when exiting fullscreen, if possible. Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.29-2-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages dosbox depends on: ii libasound2 1.0.20-2 shared library for ALSA applicatio ii libc6 2.9-13GNU C Library: Shared libraries ii libgcc11:4.4.0-5 GCC support library ii libgl1-mesa-glx [libgl 7.4.1-1 A free implementation of the OpenG ii libpng12-0 1.2.38-1 PNG library - runtime ii libsdl-net1.2 1.2.7-2 network library for Simple DirectM ii libsdl-sound1.21.0.3-3 Decoder of several sound file form ii libsdl1.2debian1.2.13-4+b1 Simple DirectMedia Layer ii libstdc++6 4.4.0-5 The GNU Standard C++ Library v3 ii zlib1g 1:1.2.3.3.dfsg-13 compression library - runtime dosbox recommends no packages. dosbox suggests no packages. -- no debconf information # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type man /etc/X11/xorg.conf at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section Files FontPath/usr/share/fonts/X11/misc FontPath/usr/X11R6/lib/X11/fonts/misc FontPath/usr/share/fonts/X11/cyrillic FontPath/usr/X11R6/lib/X11/fonts/cyrillic FontPath/usr/share/fonts/X11/100dpi/:unscaled FontPath/usr/X11R6/lib/X11/fonts/100dpi/:unscaled FontPath/usr/share/fonts/X11/75dpi/:unscaled FontPath/usr/X11R6/lib/X11/fonts/75dpi/:unscaled FontPath/usr/share/fonts/X11/Type1 FontPath/usr/X11R6/lib/X11/fonts/Type1 FontPath/usr/share/fonts/X11/100dpi FontPath/usr/X11R6/lib/X11/fonts/100dpi FontPath/usr/share/fonts/X11/75dpi FontPath/usr/X11R6/lib/X11/fonts/75dpi # path to defoma fonts FontPath/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType EndSection Section Module Loadi2c Loadbitmap Loadddc Loaddri Loadextmod Loadfreetype Loadglx Loadint10 Loadvbe EndSection Section InputDevice Identifier Generic Keyboard Driver kbd Option CoreKeyboard Option XkbRules xorg Option XkbModel pc105 Option XkbLayout dk Option XkbVariantnodeadkeys EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/input/mice Option Protocol ImPS/2 Option Emulate3Buttons true EndSection Section Monitor Identifier mon1 Option DPMS EndSection Section Monitor Identifier mon2 Option DPMS Option RightOf mon1 EndSection Section Device Identifier ATI Technologies Inc ATI Default Card Driver radeonhd BusID PCI:1:0:0 Option Monitor-DVI-I_1/digital mon1 Option Monitor-DVI-I_2/digital mon2 EndSection Section Screen Identifier Default Screen Device ATI Technologies Inc ATI Default Card DefaultDepth24 SubSection Display
Bug#525644: deluge: No tray icon in KDE 4.2
Yes, this seems to work now. Regards, Thue On Wed, May 20, 2009 at 1:14 AM, Cristian Greco cristian.deb...@gmail.comwrote: On Sun, Apr 26, 2009 at 12:29:27PM +0200, Thue Janus Kristensen wrote: When deluge is running in KDE 4.2, there is no deluge tray icon. There is icon-sized empty space in the tray, which appears and disappears as deluge is started/stopped. The tray icon works in GNOME. Hi, in effect this seems to be a problem fixed by upgrading to Qt 4.5.1. Could you please test and eventually confirm? Thanks, -- Cristian Greco GPG key ID: 0x0C095825 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAkoTPVMACgkQdYzA9QwJWCWIVgCfSOPhUJdfD+5BfVgsGGkBAd39 t5cAn0NGVJ+eLLoFyCiKA7WvO9WoYead =dzEl -END PGP SIGNATURE-
Bug#525643: deluge: Field sized in lower tray are minimized.
Package: deluge Version: 1.1.6+dfsg-2 Severity: normal When viewing an active torrent, and looking at for example the files tab in the lower pane, all the fields but the last one start out only a few pixels wide. The Peers tab has the same problem. Obviously deluge should start then at sane widths. The old version of deluge before the rewrite did not have this problem. Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages deluge depends on: ii dbus-x111.2.12-1 simple interprocess messaging syst ii deluge-common 1.1.6+dfsg-2 bittorrent client written in Pytho ii librsvg2-common 2.22.3-2 SAX-based renderer library for SVG ii notification-daemon 0.4.0-1 a daemon that displays passive pop ii python 2.5.4-2 An interactive high-level object-o ii python-dbus 0.83.0-1 simple interprocess messaging syst ii python-glade2 2.14.1-2 GTK+ bindings: Glade support ii python-notify 0.1.1-2+b1 Python bindings for libnotify ii python-support 1.0.2automated rebuilding support for P deluge recommends no packages. deluge suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#473915: deluge: Bug still exists.
Package: deluge Version: 1.1.6+dfsg-2 Severity: normal I just tested, and the bug still exists. The symptoms are a bit different. When I started the second instance of deluge, it just hang with a frozen window. But the basic problem is the same. Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages deluge depends on: ii dbus-x111.2.12-1 simple interprocess messaging syst ii deluge-common 1.1.6+dfsg-2 bittorrent client written in Pytho ii librsvg2-common 2.22.3-2 SAX-based renderer library for SVG ii notification-daemon 0.4.0-1 a daemon that displays passive pop ii python 2.5.4-2 An interactive high-level object-o ii python-dbus 0.83.0-1 simple interprocess messaging syst ii python-glade2 2.14.1-2 GTK+ bindings: Glade support ii python-notify 0.1.1-2+b1 Python bindings for libnotify ii python-support 1.0.2automated rebuilding support for P deluge recommends no packages. deluge suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525645: deluge: Peers not shown
Package: deluge Version: 1.1.6+dfsg-2 Severity: normal In the Peers tab in the lower pane for an active torrent, the current version of deluge sometimes randomly (most of the time) does not show the list of active peers. This worked fine in deluge before the rewrite. Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages deluge depends on: ii dbus-x111.2.12-1 simple interprocess messaging syst ii deluge-common 1.1.6+dfsg-2 bittorrent client written in Pytho ii librsvg2-common 2.22.3-2 SAX-based renderer library for SVG ii notification-daemon 0.4.0-1 a daemon that displays passive pop ii python 2.5.4-2 An interactive high-level object-o ii python-dbus 0.83.0-1 simple interprocess messaging syst ii python-glade2 2.14.1-2 GTK+ bindings: Glade support ii python-notify 0.1.1-2+b1 Python bindings for libnotify ii python-support 1.0.2automated rebuilding support for P deluge recommends no packages. deluge suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525644: deluge: No tray icon in KDE 4.2
Package: deluge Version: 1.1.6+dfsg-2 Severity: normal When deluge is running in KDE 4.2, there is no deluge tray icon. There is icon-sized empty space in the tray, which appears and disappears as deluge is started/stopped. The tray icon works in GNOME. Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages deluge depends on: ii dbus-x111.2.12-1 simple interprocess messaging syst ii deluge-common 1.1.6+dfsg-2 bittorrent client written in Pytho ii librsvg2-common 2.22.3-2 SAX-based renderer library for SVG ii notification-daemon 0.4.0-1 a daemon that displays passive pop ii python 2.5.4-2 An interactive high-level object-o ii python-dbus 0.83.0-1 simple interprocess messaging syst ii python-glade2 2.14.1-2 GTK+ bindings: Glade support ii python-notify 0.1.1-2+b1 Python bindings for libnotify ii python-support 1.0.2automated rebuilding support for P deluge recommends no packages. deluge suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525647: deluge: Should register itself as bittorrent handler
Package: deluge Version: 1.1.6+dfsg-2 Severity: normal By default, deluge is not shown in the dialogue Firefox pops up when opening a .torrent file, while another bittorrent client is. I assume there is somewhere in the Debian system where deluge can register itself as a bittorrent handler, so that Firefox recognizes it. The Deluge package should do so :). Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages deluge depends on: ii dbus-x111.2.12-1 simple interprocess messaging syst ii deluge-common 1.1.6+dfsg-2 bittorrent client written in Pytho ii librsvg2-common 2.22.3-2 SAX-based renderer library for SVG ii notification-daemon 0.4.0-1 a daemon that displays passive pop ii python 2.5.4-2 An interactive high-level object-o ii python-dbus 0.83.0-1 simple interprocess messaging syst ii python-glade2 2.14.1-2 GTK+ bindings: Glade support ii python-notify 0.1.1-2+b1 Python bindings for libnotify ii python-support 1.0.2automated rebuilding support for P deluge recommends no packages. deluge suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525648: Leaves deluged process hangin around
Package: deluge Version: 1.1.6+dfsg-2 Severity: normal When I do the following: -log in as a new user newuser -start deluge -logs out from newuser A deluged process is left hanging around. That process should be ended automatically by the system when deluge is closed, IMO. Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages deluge depends on: ii dbus-x111.2.12-1 simple interprocess messaging syst ii deluge-common 1.1.6+dfsg-2 bittorrent client written in Pytho ii librsvg2-common 2.22.3-2 SAX-based renderer library for SVG ii notification-daemon 0.4.0-1 a daemon that displays passive pop ii python 2.5.4-2 An interactive high-level object-o ii python-dbus 0.83.0-1 simple interprocess messaging syst ii python-glade2 2.14.1-2 GTK+ bindings: Glade support ii python-notify 0.1.1-2+b1 Python bindings for libnotify ii python-support 1.0.2automated rebuilding support for P deluge recommends no packages. deluge suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525654: deluge: Add Torrents-URL is silent on failure
Package: deluge Version: 1.1.6+dfsg-2 Severity: normal *** Please type your report below this line *** When you use Add Torrent-URL and pass an invalid URL (For example http://torrent.fedoraproject.org/torrents/Fedora-10-x86_64-DV.torrent;, note the missing D in DVD), nothing happens. Deluge should at least show an error message. or a progress bar. Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages deluge depends on: ii dbus-x111.2.12-1 simple interprocess messaging syst ii deluge-common 1.1.6+dfsg-2 bittorrent client written in Pytho ii librsvg2-common 2.22.3-2 SAX-based renderer library for SVG ii notification-daemon 0.4.0-1 a daemon that displays passive pop ii python 2.5.4-2 An interactive high-level object-o ii python-dbus 0.83.0-1 simple interprocess messaging syst ii python-glade2 2.14.1-2 GTK+ bindings: Glade support ii python-notify 0.1.1-2+b1 Python bindings for libnotify ii python-support 1.0.2automated rebuilding support for P deluge recommends no packages. deluge suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525667: php-elisp: Various highlighting bugs
Package: php-elisp Version: 1.4.0-2 Severity: normal A bunch of markup errors: ?php //'b' wrongly marked yellow /*$a-b*/ //'b' wrongly marked yellow a-b; //'class' wrongly marked cyan, '_name' wrongly marked green class_name(); //'continue' wrongly marked cyan function continue_a() {} //'wrongly' wrongly marked purple /*continue wrongly marked cyan*/ //'a' wrongly marked purple /*case a*/ //'instanceof' should be cyan, 'b' should be green $a instanceof b; //'Array' should be green function a(Array $b) {} //'static' should be cyan private static function a() {} //'a_false' should be blue function a_false() {} //'a_true' should be blue function a_true() {} //'a_false' should be yellow $a_false; //'a_true' should be yellow $a_true; //'c' should be green class a implements b,c {} //'a' should be green a::$b; ? Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages php-elisp depends on: ii emacs [emacsen] 22.3+1-1 The GNU Emacs editor (metapackage) ii emacs22 [emacsen] 22.3+1-1 The GNU Emacs editor php-elisp recommends no packages. Versions of packages php-elisp suggests: pn php4 | php3 none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525682: kde4: Error in window management
Package: kde4 Version: 5 Severity: normal I am not sure which kde package I should file this against, so filing it here. There is a bug in which windows are shown on top. It is possibly related to me having a dual-monitor setup. To reproduce: -Start firefox -Start gnome terminal x2 -move the gnome terminals so there are one on each monitor, Iceweasel is on monitor 1. -Advanced-Fullscreen the gnome terminal on monitor 2 -Advanced-Fullscreen the gnome terminal on monitor 1 -ALT-F3 unfulscreen the terminal on monitor 1 -Try to bring iceweasel in front of the terminal on monitor 1. (fails, bug) Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages kde4 depends on: ii kde4-minimal 5 the K Desktop Environment 4, minim ii kdeadmin 4:4.2.2-1 system administration tools from t ii kdeartwork4:4.2.2-2 themes, styles and other artwork f ii kdeedu4:4.2.2-1 educational applications from the ii kdegames 4:4.2.2-1 games from the official KDE 4 rele ii kdegraphics 4:4.2.2-1 graphics applications from the off ii kdemultimedia 4:4.2.2-1 multimedia applications from the o ii kdenetwork4:4.2.2-1 networking applications from the o ii kdepim4:4.2.2-1 Personal Information Management ap ii kdeplasma-addons 4:4.2.2-1 addons for KDE 4 Plasma - metapack ii kdeutils 4:4.2.2-1 general-purpose utilities from the Versions of packages kde4 recommends: ii kdeaccessibility 4:4.2.2-1 accessibility packages from the of pn kdesdknone (no description available) ii kdetoys 4:4.2.2-1 desktop toys from the official KDE ii kdewebdev 4:4.2.2-1 web development apps from the offi Versions of packages kde4 suggests: pn kde-l10n none (no description available) pn koffice none (no description available) ii xorg 1:7.4+1X.Org X Window System -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525667: php-elisp: Various highlighting bugs
I just tested version 1.5 from upstream, and some of the bugs are fixed in that version. Here are the remaining bugs (a few new ones added) ?php //'b' wrongly marked yellow /*$a-b*/ a-b; //'aa' wrongly marked purple /*continue aa*/ /*break aa*/ /*case aa*/ continue aa; break aa; case aa; 'continue aa'; //'b' should be green $a instanceof b; //Why is $that purple? $that; //b wrongly white /*$a-b()*/ $a-b() //'c' should be green class a implements b,c {} ? Regards, Thue On Sun, Apr 26, 2009 at 10:25 PM, Ola Lundqvist o...@debian.org wrote: Hi Yes you are right. I should probably orphan this package as neither I nor Pontus have had any time for it. Best regards, // Ola On Sun, Apr 26, 2009 at 02:36:55PM +0200, Thue Janus Kristensen wrote: Package: php-elisp Version: 1.4.0-2 Severity: normal A bunch of markup errors: ?php //'b' wrongly marked yellow /*$a-b*/ //'b' wrongly marked yellow a-b; //'class' wrongly marked cyan, '_name' wrongly marked green class_name(); //'continue' wrongly marked cyan function continue_a() {} //'wrongly' wrongly marked purple /*continue wrongly marked cyan*/ //'a' wrongly marked purple /*case a*/ //'instanceof' should be cyan, 'b' should be green $a instanceof b; //'Array' should be green function a(Array $b) {} //'static' should be cyan private static function a() {} //'a_false' should be blue function a_false() {} //'a_true' should be blue function a_true() {} //'a_false' should be yellow $a_false; //'a_true' should be yellow $a_true; //'c' should be green class a implements b,c {} //'a' should be green a::$b; ? Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages php-elisp depends on: ii emacs [emacsen] 22.3+1-1 The GNU Emacs editor (metapackage) ii emacs22 [emacsen] 22.3+1-1 The GNU Emacs editor php-elisp recommends no packages. Versions of packages php-elisp suggests: pn php4 | php3 none (no description available) -- no debconf information -- - Ola Lundqvist --- / o...@debian.org Annebergsslingan 37 \ | o...@inguza.com 654 65 KARLSTAD | | http://inguza.com/ +46 (0)70-332 1551 | \ gpg/f.p.: 7090 A92B 18FE 7994 0C36 4FE4 18A1 B1CF 0FE5 3DD9 / ---
Bug#521706: iceweasel: Critical security update 3.0.8
Package: iceweasel Version: 3.0.7-1 Severity: normal The Firefox 3.0.8 release fixes 2 remote code execution security holes. (You are probably aware of this but I thought it would be nice to have a Debian tracking bug for the issue) http://www.mozilla.org/security/known-vulnerabilities/firefox30.html#firefox3.0.8 Regards, Thue -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages iceweasel depends on: ii debianutils 2.31Miscellaneous utilities specific t ii fontconfig 2.6.0-3 generic font configuration library ii libc62.9-4 GNU C Library: Shared libraries ii libglib2.0-0 2.18.4-2The GLib library of C routines ii libgtk2.0-0 2.14.7-4+b1 The GTK+ graphical user interface ii libnspr4-0d 4.7.1-4 NetScape Portable Runtime Library ii libstdc++6 4.3.3-3 The GNU Standard C++ Library v3 ii procps 1:3.2.7-11 /proc file system utilities ii psmisc 22.6-1 Utilities that use the proc filesy ii xulrunner-1.91.9.0.7-1 XUL + XPCOM application runner iceweasel recommends no packages. Versions of packages iceweasel suggests: pn latex-xft-fonts none (no description available) ii libkrb53 1.6.dfsg.4~beta1-11 Transitional library package/krb4 pn mozplugger none (no description available) pn ttf-mathematica4.1 none (no description available) pn xfonts-mathmlnone (no description available) pn xprint none (no description available) ii xulrunner-1.9-gnome- 1.9.0.7-1 Support for GNOME in xulrunner app -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#518074: hpoj: Package remove fails to remove init script
Package: hpoj Version: Package remove fails to remove init script Severity: normal After # aptitude remove hpoj I still have the following on my system: t...@h ~ ls -l /etc/init.d/hpoj -rwxr-xr-x 1 root root 45517 2008-10-08 14:24 /etc/init.d/hpoj t...@h ~ ls -l /etc/rc4.d/S19hpoj lrwxrwxrwx 1 root root 14 2009-03-03 23:34 /etc/rc4.d/S19hpoj - ../init.d/hpoj So at each boot hpoj still tries to start. dpkg --purge hpoj fixes it, but should not be neccesary. The version of hpoj I installed and uninstalled was 0.91-14 Regards, Thue -- System Information: Debian Release: 5.0 APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages hpoj depends on: ii adduser 3.110 add and remove users and groups ii libc62.7-18 GNU C Library: Shared libraries ii libgcc1 1:4.3.3-3 GCC support library ii libsane 1.0.19-25 API library for scanners ii libstdc++6 4.3.3-3 The GNU Standard C++ Library v3 ii libusb-0.1-4 2:0.1.12-13 userspace USB programming library ii psmisc 22.6-1 Utilities that use the proc filesy Versions of packages hpoj recommends: ii cups 1.3.8-1lenny4.1Common UNIX Printing System(tm) - ii cups-bsd [lpr]1.3.8-1lenny4.1Common UNIX Printing System(tm) - ii foomatic-filters 3.0.2-20080211-3.2 OpenPrinting printer support - fil ii hpijs 2.8.6.b-4 HP Linux Printing and Imaging - gs Versions of packages hpoj suggests: ii cups-bsd 1.3.8-1lenny4.1 Common UNIX Printing System(tm) - ii foomatic-db-hpijs20080211-1 OpenPrinting printer support - dat ii ghostscript-x8.63.dfsg.1-2 The GPL Ghostscript PostScript/PDF ii hplip2.8.6.b-4 HP Linux Printing and Imaging Syst pn hpoj-xojpanelnone (no description available) ii mtools 4.0.4-1 Tools for manipulating MSDOS files pn sane none (no description available) pn xsanenone (no description available) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#500374: 3.0.2 also fixes mozilla bug 435764
Firefox 3.0.2 also fixes mozilla bug 435764. Bug 435764 crashes my browser constantly due to a bad interaction with swfdec. https://bugzilla.mozilla.org/show_bug.cgi?id=435764 Regards, Thue
Bug#494574: apticron: Apticron will send recommends not installed
Package: apticron Version: 1.1.21 Severity: normal It seems that apticron will send an email about recommended packages not installed. So even though my system is completely up to date, I get an email each day because for example perl-doc is recommended by perl, and perl-doc is not installed. IMO, apticron should not count non-installed recommended packages when determining if an email should be sent. Regards, Thue -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.25-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages apticron depends on: ii apt0.7.14+b1 Advanced front-end for dpkg ii bsd-mailx [mailx] 8.1.2-0.20071201cvs-3 A simple mail user agent ii debconf [debconf-2 1.5.22Debian configuration management sy ii mailx 1:20071201-3 Transitional package for mailx ren ii ucf3.007 Update Configuration File: preserv Versions of packages apticron recommends: ii apt-listchanges 2.82 package change history notificatio ii iproute 20080725-2 networking and traffic control too apticron suggests no packages. -- debconf information: apticron/notification: root -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#494140: Upgrade to sshfs 2.1 bugfix release
Package: sshfs Version: 2.0-2 Severity: grave Justification: causes non-serious data loss There is a new 2.1 release, containing bugfixes. Among the fixes are: *Fix bug in caching which could cause file corruption for append mode writes. Så a data loss bug, hence the grave severity of the bug. The new release also fixes the statvfs call, making for example df work. Regards, Thue -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages sshfs depends on: ii fuse-utils2.7.3-4Filesystem in USErspace (utilities ii libc6 2.7-10 GNU C Library: Shared libraries ii libfuse2 2.7.3-4Filesystem in USErspace library ii libglib2.0-0 2.16.4-2 The GLib library of C routines ii openssh-client1:4.7p1-12 secure shell client, an rlogin/rsh sshfs recommends no packages. sshfs suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#490530: libc6: gethostbyaddr() times out if reverse dns not found
Package: libc6 Version: 2.7-10 Severity: normal I noticed that when I tried pinging kalus.dk (which does not have reverse DNS at the time of writing), ping would only send a packet every 5 seconds. [EMAIL PROTECTED] ~ host kalus.dk kalus.dk has address 89.233.27.15 kalus.dk mail is handled by 10 mail.kalus.dk. [EMAIL PROTECTED] ~ host 89.233.27.15 Host 15.27.233.89.in-addr.arpa. not found: 3(NXDOMAIN) [EMAIL PROTECTED] ~ ping kalus.dk PING kalus.dk (89.233.27.15) 56(84) bytes of data. [5 second pause] 64 bytes from 89.233.27.15: icmp_seq=1 ttl=56 time=6.21 ms [5 second pause] 64 bytes from 89.233.27.15: icmp_seq=2 ttl=56 time=5.89 ms [5 second pause] 64 bytes from 89.233.27.15: icmp_seq=3 ttl=56 time=5.98 ms [5 second pause] 64 bytes from 89.233.27.15: icmp_seq=4 ttl=56 time=4.48 ms I tracked it down to the function call char *pr_addr in ping.c, when calling gethostbyaddr() : /* pr_addr -- Return an ascii host address as a dotted quad and optionally with a hostname. */ char *pr_addr(__u32 addr) { struct hostent *hp; [...] hp = gethostbyaddr((char *)addr, 4, AF_INET); [...] } I see no reason why it should take 5 seconds to find out that reverse DNS is not available, when the host command returns the answer immediately. Doing a strace I get (selected parts of trace): stat(/etc/resolv.conf, {st_mode=S_IFREG|0644, st_size=131, ...}) = 0 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 4 connect(4, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr(83.221.148.2)}, 28) = 0 fcntl(4, F_GETFL) = 0x2 (flags O_RDWR) fcntl(4, F_SETFL, O_RDWR|O_NONBLOCK)= 0 poll([{fd=4, events=POLLOUT, revents=POLLOUT}], 1, 0) = 1 sendto(4, \t,\1\0\0\1\0\0\0\0\0\0\00215\00227\003233\00289\7in-a..., 43, MSG_NOSIGNAL, NULL, 0) = 43 poll([{fd=4, events=POLLIN, revents=POLLIN}], 1, 5000) = 1 ioctl(4, FIONREAD, [103]) = 0 recvfrom(4, \t,\201\203\0\1\0\0\0\1\0\0\00215\00227\003233\00289\7..., 1024, 0, {sa_family=AF_INET, sin_port=htons(53), sin_addr=inet_addr(83.221.148.2)}, [16]) = 103 close(4)= 0 socket(PF_FILE, SOCK_STREAM, 0) = 4 fcntl(4, F_GETFD) = 0 fcntl(4, F_SETFD, FD_CLOEXEC) = 0 connect(4, {sa_family=AF_FILE, path=/var/run/avahi-daemon/socket}, 110) = 0 fcntl(4, F_GETFL) = 0x2 (flags O_RDWR) fstat(4, {st_mode=S_IFSOCK|0777, st_size=0, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2afcdfb72000 lseek(4, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek) write(4, RESOLVE-ADDRESS 89.233.27.15\n, 29) = 29 read(4, [***Here there is a 5 second wait***] -15 Timeout reached\n, 1024) = 20 close(4)= 0 I noted the lseek(4, 0, SEEK_CUR) = -1 ESPIPE (Illegal seek) Which seems suspecious. Regards, Thue -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages libc6 depends on: ii libgcc1 1:4.3.1-2 GCC support library libc6 recommends no packages. -- debconf information: * glibc/upgrade: true glibc/restart-failed: * glibc/restart-services: openbsd-inetd exim4 cupsys cron atd -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#490530: libc6: gethostbyaddr() times out if reverse dns not found
Yes - reading the trace closer it is obviously an avahi bug. Regards, Thue On Sat, Jul 12, 2008 at 3:12 PM, Stephen Gran [EMAIL PROTECTED] wrote: This one time, at band camp, Thue Janus Kristensen said: I noticed that when I tried pinging kalus.dk (which does not have reverse DNS at the time of writing), ping would only send a packet every 5 seconds. connect(4, {sa_family=AF_FILE, path=/var/run/avahi-daemon/socket}, 110) = 0 write(4, RESOLVE-ADDRESS 89.233.27.15\n, 29) = 29 read(4, [***Here there is a 5 second wait***] -15 Timeout reached\n, 1024) = 20 close(4)= 0 Not that glibc doesn't have similar problems, but surely that's an avahi bug? -- - | ,''`.Stephen Gran | | : :' :[EMAIL PROTECTED] | | `. `'Debian user, admin, and developer | |`- http://www.debian.org | - -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFIeK3MSYIMHOpZA44RAi50AJ9zsnX17sRcT1inG92VuFXFAUebIQCgxP6A U47EBFj4aH7Fbt1Lofe4lQw= =Xkeg -END PGP SIGNATURE-
Bug#490530: libc6: gethostbyaddr() times out if reverse dns not found
I investigated further, and this is arguably not a bug. Please close it. Regards, Thue On Sat, Jul 12, 2008 at 3:17 PM, Thue Janus Kristensen [EMAIL PROTECTED] wrote: Yes - reading the trace closer it is obviously an avahi bug. Regards, Thue On Sat, Jul 12, 2008 at 3:12 PM, Stephen Gran [EMAIL PROTECTED] wrote: This one time, at band camp, Thue Janus Kristensen said: I noticed that when I tried pinging kalus.dk (which does not have reverse DNS at the time of writing), ping would only send a packet every 5 seconds. connect(4, {sa_family=AF_FILE, path=/var/run/avahi-daemon/socket}, 110) = 0 write(4, RESOLVE-ADDRESS 89.233.27.15\n, 29) = 29 read(4, [***Here there is a 5 second wait***] -15 Timeout reached\n, 1024) = 20 close(4)= 0 Not that glibc doesn't have similar problems, but surely that's an avahi bug? -- - | ,''`.Stephen Gran | | : :' :[EMAIL PROTECTED] | | `. `'Debian user, admin, and developer | |`- http://www.debian.org | - -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFIeK3MSYIMHOpZA44RAi50AJ9zsnX17sRcT1inG92VuFXFAUebIQCgxP6A U47EBFj4aH7Fbt1Lofe4lQw= =Xkeg -END PGP SIGNATURE-
Bug#486660: istanbul: Save never finishes
It works if xrandr is not set up. There is a file at filesink location= Regards, Thue On Wed, Jul 2, 2008 at 2:12 PM, Luca Bruno [EMAIL PROTECTED] wrote: I have to admit that istanbul came out before xrandr was developed, so it may work weirdly (or don't work) with it. I can't anything wrong in your report, except a really big resolution. Try to record without xrandr multiple desktop. Also try to see if anything is available at the location pointed by filesink location= Ciao, Luca -- .''`. ** Debian GNU/Linux ** | Luca Bruno : :' : The Universal O.S.| lucab (AT) debian.org `. `'` | GPG Key ID: 3BFB9FB3 `- http://www.debian.org | Debian GNU/Linux Developer
Bug#474735: kicker-applets: Date not shown in clock applet
Yep, it works for me too. Regards, Thue On Tue, Jun 24, 2008 at 10:23 PM, Ana Guerrero [EMAIL PROTECTED] wrote: tags 474735 unreproducible thanks Hi Thue, On Mon, Apr 07, 2008 at 03:42:43PM +0200, Thue Janus Kristensen wrote: Package: kicker-applets Version: 4:3.5.8-3 Severity: normal The clock applet doesn't who date when configured to. The date setting seems to have no effect. I can not reproduce this problem using current KDE 3.5.9. do you still have this problem? Did you find someway of reproduce it easily? Ana Regards, Thue -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.24.2 (SMP w/2 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages kicker-applets depends on: ii kdelibs4c2a 4:3.5.8.dfsg.1-7 core libraries and binaries for al ii kicker 4:3.5.8.dfsg.1-7 desktop panel for KDE ii libc6 2.7-6GNU C Library: Shared libraries ii libgcc1 1:4.3.0-1GCC support library ii libstdc++6 4.3.0-1 The GNU Standard C++ Library v3 kicker-applets recommends no packages. -- no debconf information
Bug#486658: gstreamer0.10-ffmpeg-full upgrade 0.10.3-0.1-0.10.4-0.1 broke swfdec-mozilla
On Wed, Jun 18, 2008 at 12:42 AM, Santiago Garcia Mantinan [EMAIL PROTECTED] wrote: I found out that the upgrade of gstreamer0.10-ffmpeg-full from version 0.10.3-0.1 to version 0.10.4-0.1 was what broke youtube videos in swfdec-mozilla. I'm using 0.10.4-3 version of gstreamer0.10-ffmpeg without problems, changing to -full breaks it, so I suppose this is some kind of problem on -full version. If you can confirm this we can close the bug and maybe marillat has the time to look at -full's problem. Yep, gstreamer0.10-ffmpeg 0.10.4-3 works. The problem is with -full. Regards, Thue
Bug#486657: gdm crashes on system shutdown/restart
Package: gdm Version: 2.20.6-1 Severity: normal When I shut down the system I get the following error: [...] Asking all remaining processes to terminate...done. gdm[3459]: GLib-CRITICAL: g_hash_table_lookup_extended: assertion 'hash_table != NULL' failed gdm[3459]: WARNING: Request for invalid configuration key xdmcp/Enable=false *** glibc detected *** /usr/sbin/gdm: double free or corruption (!prev): 0x00664cf0 [sometimes it prints out a huge memory map here] An image of the shutdown screen: http://www.thuejk.dk/gdm_crash.jpg Regards, Thue -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages gdm depends on: ii adduser3.107 add and remove users and groups ii debconf [debconf-2.0] 1.5.22Debian configuration management sy ii gksu 2.0.0-5 graphical frontend to su ii gnome-session [x-sessi 2.22.2-1 The GNOME 2 Session Manager ii gnome-terminal [x-term 2.22.2-1 The GNOME 2 terminal emulator appl ii libart-2.0-2 2.3.20-2 Library of functions for 2D graphi ii libatk1.0-01.22.0-1 The ATK accessibility toolkit ii libattr1 1:2.4.41-1Extended attribute shared library ii libc6 2.7-10GNU C Library: Shared libraries ii libcairo2 1.6.4-1+b1The Cairo 2D vector graphics libra ii libdbus-1-31.2.1-2 simple interprocess messaging syst ii libdbus-glib-1-2 0.74-4simple interprocess messaging syst ii libdmx11:1.0.2-3 X11 Distributed Multihead extensio ii libfontconfig1 2.5.0-2 generic font configuration library ii libfreetype6 2.3.5-1+b1FreeType 2 font engine, shared lib ii libglade2-01:2.6.2-1 library to load .glade files at ru ii libglib2.0-0 2.16.3-2 The GLib library of C routines ii libgnomecanvas2-0 2.20.1.1-1A powerful object-oriented display ii libgtk2.0-02.12.9-3 The GTK+ graphical user interface ii libpam-modules 0.99.7.1-6Pluggable Authentication Modules f ii libpam-runtime 0.99.7.1-6Runtime support for the PAM librar ii libpam0g 0.99.7.1-6Pluggable Authentication Modules l ii libpango1.0-0 1.20.2-2 Layout and rendering of internatio ii librsvg2-2 2.22.2-2 SAX-based renderer library for SVG ii librsvg2-common2.22.2-2 SAX-based renderer library for SVG ii libselinux12.0.59-1 SELinux shared libraries ii libwrap0 7.6.q-15 Wietse Venema's TCP wrappers libra ii libx11-6 2:1.0.3-7 X11 client-side library ii libxau61:1.0.3-3 X11 authorisation library ii libxdmcp6 1:1.0.2-3 X11 Display Manager Control Protoc ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar ii libxi6 2:1.1.3-1 X11 Input extension library ii libxinerama1 2:1.0.3-2 X11 Xinerama extension library ii libxml22.6.32.dfsg-2 GNOME XML library ii lsb-base 3.2-12Linux Standard Base 3.2 init scrip ii metacity [x-window-man 1:2.22.0-1A lightweight GTK2 based Window Ma ii twm [x-window-manager] 1:1.0.4-1 Tab window manager ii xterm [x-terminal-emul 235-1 X terminal emulator ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages gdm recommends: ii dialog 1.1-20080316-1Displays user-friendly dialog boxe pn gdm-themes none(no description available) ii whiptail 0.52.2-11.2 Displays user-friendly dialog boxe ii xserver-xephyr 2:1.4.1~git20080517-1 nested X server ii xserver-xorg 1:7.3+10 the X.Org X server ii zenity 2.22.1-1 Display graphical dialog boxes fro -- debconf information: gdm/daemon_name: /usr/bin/gdm * shared/default-x-display-manager: gdm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#486658: swfdec-mozilla: Youtube videos show random garbage
Package: swfdec-mozilla Version: 0.6.0-2 Severity: important Youtube videos show random garbage when viewed. And no, it is random bits, not even the normal random garbage normally showed on Youtube. :) The youtube flash controls are displayed fine. It is only the video itself which doesn't work. Sound seems to work. Youtube videos worked yesterday, but I made an apt-upgrade since then. I am not sure which upgraded package causes the problem - I tried to downgrade a few, but couldn't find the offending one. Regards, Thue -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages swfdec-mozilla depends on: ii libatk1.0-0 1.22.0-1 The ATK accessibility toolkit ii libc6 2.7-10 GNU C Library: Shared libraries ii libcairo2 1.6.4-1+b1 The Cairo 2D vector graphics libra ii libglib2.0-0 2.16.3-2 The GLib library of C routines ii libgtk2.0-0 2.12.9-3 The GTK+ graphical user interface ii liboil0.3 0.3.14-4 Library of Optimized Inner Loops ii libpango1.0-0 1.20.2-2 Layout and rendering of internatio ii libswfdec-0.6-90 0.6.6-1SWF (Macromedia Flash) decoder lib swfdec-mozilla recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#486660: istanbul: Save never finishes
Package: istanbul Version: 0.2.2-4 Severity: normal I have the same problem as in bug #415896, except that the save never finishes even when I just tell it to record the whole screen. (Bug #415896: When the option Select window to record is used the program never finishes the save operation. The icon in the tray does not change from the grey square back to the red circle. If the mouse is over the icon, the context help says In process of saving to disk., but it never finishes. The save dialog never appears. The program needs to be terminated by a kill command.) I have two screen beside each other using xrandr, but since a video is never saved I assume the problem is not the same as bug #476722. The output to the terminal is: [EMAIL PROTECTED] ~ istanbul /var/lib/python-support/python2.5/istanbul/main/tray_icon.py:26: DeprecationWarning: the module egg.trayicon is deprecated; equivalent functionality can now be found in pygtk 2.10 import egg.trayicon DEBUG: final pipeline: oggmux name=mux ! filesink location=/tmp/tmpwa5Hk1 istximagesrc name=videosource display-name=:0.0 screen-num=0 ! video/x-raw-rgb,framerate=10/1 ! videorate ! ffmpegcolorspace ! videoscale method=1 ! video/x-raw-yuv,width=3200,height=1200,framerate=10/1 ! theoraenc ! queue ! mux. gconfaudiosrc name=audiosource ! audioconvert ! vorbisenc ! queue ! mux. Regards, Thue -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages istanbul depends on: ii gconf2 2.22.0-1 GNOME configuration database syste ii gettext0.17-2GNU Internationalization utilities ii gstreamer0.10-alsa 0.10.19-2 GStreamer plugin for ALSA ii gstreamer0.10-plugins-base 0.10.19-2 GStreamer plugins from the base ii gstreamer0.10-plugins-good 0.10.8-4 GStreamer plugins from the good ii gstreamer0.10-x0.10.19-2 GStreamer plugins for X11 and Pang ii libc6 2.7-10GNU C Library: Shared libraries ii libglib2.0-0 2.16.3-2 The GLib library of C routines ii libgstreamer0.10-0 0.10.19-3 Core GStreamer libraries and eleme ii libice62:1.0.4-1 X11 Inter-Client Exchange library ii libsm6 2:1.0.3-1+b1 X11 Session Management library ii libx11-6 2:1.0.3-7 X11 client-side library ii libxdamage11:1.1.1-4 X11 damaged region extension libra ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar ii libxfixes3 1:4.0.3-2 X11 miscellaneous 'fixes' extensio ii libxml22.6.32.dfsg-2 GNOME XML library ii python 2.5.2-1 An interactive high-level object-o ii python-glade2 2.12.1-1 GTK+ bindings: Glade support ii python-gnome2 2.22.0-1 Python bindings for the GNOME desk ii python-gnome2-extras 2.14.3-1+b1 Python bindings for the GNOME desk ii python-gst0.10 0.10.11-1 generic media-playing framework (P ii python-support 0.8.1 automated rebuilding support for P ii python-xlib0.14-1Interface for Python to the X11 Pr istanbul recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#486662: gnome-desktop-environment: Camera import dialogue with no effect
Package: gnome-desktop-environment Version: 1:2.20.2.4 Severity: normal Whenever I connect my camera to my USB port, the gnome desktop pops up a Camera Import dialogue such as this one: http://tombuntu.com/wp-content/uploads/2008/05/ipoddialog.jpg However when I click import photos nothing happens except that the dialogue goes away, even though there are pictures on the camera. I am perfectly able to download the photos using digiKam. Obviously something was supposed to happen... I am reporting this bug on gnome-desktop-environment since I don't know which component is popping up the dialogue. Regards, Thue -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages gnome-desktop-environment depends on: ii alacarte 0.11.3-1 easy GNOME menu editing tool ii bug-buddy 2.22.0+dfsg-2 GNOME Desktop Environment bug repo ii deskbar-applet 2.22.1-1+b1 universal search and navigation ba ii desktop-base 4.0.7 common files for the Debian Deskto ii dmz-cursor-theme 0.4.1 Style neutral, scalable cursor the ii ekiga 2.0.11-2 H.323 and SIP compatible VoIP clie ii epiphany-browser 2.22.1.1-1Intuitive web browser - dummy pack ii epiphany-gecko [gnome-www- 2.22.1.1-1Intuitive GNOME web browser - Geck ii evince 2.20.2-1+b1 Document (postscript, pdf) viewer ii evolution 2.22.1-1 groupware suite with mail client a ii evolution-data-server 2.22.1-1 evolution database backend server ii fast-user-switch-applet2.22.0-1 Applet for the GNOME panel providi ii file-roller2.22.3-1 an archive manager for GNOME ii gcalctool 5.22.1-1 A GTK2 desktop calculator ii gconf-editor 2.22.0-1 An editor for the GConf configurat ii gdm2.20.6-1 GNOME Display Manager ii gnome-about2.22.2-1 The GNOME about box ii gnome-backgrounds 2.22.0-1 a set of backgrounds packaged with ii gnome-core 1:2.20.2.4The GNOME Desktop Environment -- e ii gnome-keyring 2.22.1-1 GNOME keyring services (daemon and ii gnome-media2.22.0-2 GNOME media utilities ii gnome-menus2.22.2-1 an implementation of the freedeskt ii gnome-netstatus-applet 2.12.1-2 Network status applet for GNOME 2 ii gnome-nettool 2.22.0-1 network information tool for GNOME ii gnome-power-manager2.22.1-1 frontend for gnome-powermanager ii gnome-screensaver 2.22.2-1 GNOME screen saver and locker ii gnome-system-monitor 2.22.1-1 Process viewer and system resource ii gnome-system-tools 2.20.0-2 Cross-platform configuration utili ii gnome-themes 2.22.2-1 official themes for the GNOME 2 de ii gnome-user-guide 2.22.1-1 GNOME user's guide ii gnome-utils2.20.0.1-2GNOME desktop utilities ii gnome-volume-manager 2.22.1-1 GNOME daemon to auto-mount and man ii gstreamer0.10-alsa 0.10.19-2 GStreamer plugin for ALSA ii gstreamer0.10-plugins-base 0.10.19-2 GStreamer plugins from the base ii gstreamer0.10-plugins-good 0.10.8-4 GStreamer plugins from the good ii gstreamer0.10-tools0.10.19-3 Tools for use with GStreamer ii gtk2-engines 1:2.14.2-1theme engines for GTK+ 2.x ii gucharmap 1:2.22.1-1Unicode character picker and font ii iceweasel-gnome-support [g 2.0.0.14-2Support for Gnome in Iceweasel ii libgnome2-perl 1.042-1+b1Perl interface to the GNOME librar ii libgnomevfs2-bin 1:2.22.0-3GNOME Virtual File System (support ii libgnomevfs2-extra 1:2.22.0-3GNOME Virtual File System (extra m ii nautilus-cd-burner 2.20.0-1 CD Burning front-end for Nautilus ii seahorse 2.22.0-1 GNOME front end for GnuPG ii sound-juicer 2.22.0-1 GNOME 2 CD Ripper ii totem 2.22.2-3 A simple media player for the GNOM ii vinagre0.5.1-1 VNC client for the GNOME Desktop ii vino 2.22.2-1 VNC server for GNOME ii zenity 2.22.1-1 Display graphical dialog boxes fro Versions of packages gnome-desktop-environment recommends: pn dasher none (no description available) pn fam none (no description available) pn gnome-accessibility-themes none (no description available) ii gnome-games
Bug#486658: gstreamer0.10-ffmpeg-full upgrade 0.10.3-0.1-0.10.4-0.1 broke swfdec-mozilla
I found out that the upgrade of gstreamer0.10-ffmpeg-full from version 0.10.3-0.1 to version 0.10.4-0.1 was what broke youtube videos in swfdec-mozilla. Regards, Thue
Bug#486662: gnome-desktop-environment: Camera import dialogue with no effect
On Tue, Jun 17, 2008 at 5:55 PM, Josselin Mouette [EMAIL PROTECTED] wrote: Le mardi 17 juin 2008 à 15:52 +0200, Thue Janus Kristensen a écrit : Package: gnome-desktop-environment Version: 1:2.20.2.4 Severity: normal Whenever I connect my camera to my USB port, the gnome desktop pops up a Camera Import dialogue such as this one: http://tombuntu.com/wp-content/uploads/2008/05/ipoddialog.jpg However when I click import photos nothing happens except that the dialogue goes away, even though there are pictures on the camera. I am perfectly able to download the photos using digiKam. Obviously something was supposed to happen... I am reporting this bug on gnome-desktop-environment since I don't know which component is popping up the dialogue. It is popped by gnome-volume-manager. You can set its preferences in System - Preferences - Removable Drives and Media, and tell it e.g. to use digikam (the default being gthumb). I will add a Recommends on gthumb in the next meta-gnome2 upload, as it is indeed a useful application to install for this case. Yep, gthumb is not installed. IMO it should at least give an error message when the specified handler is not found, instead of silently exiting. With a text describing how to change the handler for bonus points :). Thanks Regards, Thue
Bug#480741: I see the error too
I got the same error [EMAIL PROTECTED] ~ ls -l /usr/lib/python2.5/site-packages/cairo total 96 -rw-r--r-- 1 root root 95904 2007-12-22 18:53 _cairo.so Regards, Thue
Bug#479064: postfix: auto-modified master.cf during upgrade sarge-etch invalid
Package: postfix Version: 2.3.8-2+b1 Severity: important I just upgraded my Debian Sarge to Debian Etch. Before the upgrade my the end of my /etc/postfix/master.cf looked like smtp-amavis unix - - n - 2 smtp -o smtp_data_done_timeout=1200 -o disable_dns_l\ ookups=yes 127.0.0.1:10025 inet n - n - - smtpd -o content_filter= -o local_recipient_maps\ = -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restri\ ctions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_reci\ pient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict\ _rfc821_envelopes=yes -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=100\ 1 -o smtpd_hard_error_limit=1000 (no newline at end of file) The postfix upgrade asked if it should add a domainsomething to the configuration, and I said yes. (dont know if this is relevant) After the upgrade the end of master.cf looked like this: 127.0.0.1:10025 inet n - n - - smtpd -o content_filter= -o local_recipient_maps\ = -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_client_restri\ ctions= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_reci\ pient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o strict\ _rfc821_envelopes=yes -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=100\ 1 -o smtpd_hard_error_limit=1000tlsmgrunix - - - 1000? 1 tlsmgr scacheunix - - - - 1 scache discard unix - - - - - discard Where there obviously is a missing newline. Obviously the configuration did not work. Regards, Thue -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16.27 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages postfix depends on: ii adduser3.102 Add and remove users and groups ii debconf [debconf-2.0] 1.5.11etch1 Debian configuration management sy ii dpkg 1.13.25 package maintenance system for Deb ii libc6 2.3.6.ds1-13etch5 GNU C Library: Shared libraries ii libdb4.3 4.3.29-8 Berkeley v4.3 Database Libraries [ ii libsasl2-2 2.1.22.dfsg1-8Authentication abstraction library ii libssl0.9.80.9.8c-4etch1 SSL shared libraries ii lsb-base 3.1-23.2etch1 Linux Standard Base 3.1 init scrip ii netbase4.29 Basic TCP/IP networking system ii ssl-cert 1.0.14Simple debconf wrapper for openssl Versions of packages postfix recommends: ii emacs21 [mail-re 21.4a+1-3etch1 The GNU Emacs editor ii mailx [mail-read 1:8.1.2-0.20050715cvs-1 A simple mail user agent ii mutt [mail-reade 1.5.13-1.1etch1 text-based mailreader supporting M -- debconf information excluded # # Postfix master process configuration file. Each logical line # describes how a Postfix daemon program should be run. # # A logical line starts with non-whitespace, non-comment text. # Empty lines and whitespace-only lines are ignored, as are comment # lines whose first non-whitespace character is a `#'. # A line that starts with whitespace continues a logical line. # # The fields that make up each line are described below. A - field # value requests that a default value be used for that field. # # Service: any name that is valid for the specified transport type # (the next field). With INET transports, a service is specified as # host:port. The host part (and colon) may be omitted. Either host # or port may be given in symbolic form or in numeric form. Examples # for the SMTP server: localhost:smtp receives mail via the loopback # interface only; 10025 receives mail on port 10025. # # Transport type: inet for Internet sockets, unix for UNIX-domain # sockets, fifo for named pipes. # # Private: whether or not access is restricted to the mail system. # Default is private service. Internet (inet) sockets can't be private. # # Unprivileged: whether the service runs with root privileges or as # the owner of the Postfix system (the owner name is controlled by the # mail_owner configuration variable in the main.cf file). Only the # pipe, virtual and local delivery daemons require privileges. # # Chroot: whether or not the service runs chrooted to the mail queue # directory (pathname is controlled by the queue_directory configuration # variable in the main.cf file). Presently, all Postfix daemons can run # chrooted, except for the pipe, virtual and local delivery daemons. # The proxymap server can run chrooted, but doing so defeats most of # the purpose of having that service in the first place. # The files in the examples/chroot-setup subdirectory describe how # to set up a Postfix chroot environment for your type of machine. # # Wakeup time:
Bug#342632: Various fixes for emacs php mode
I played around with the emacs php mode, and made a few fixes to what on my system is /usr/share/emacs/site-lisp/php-elisp/php-mode.el I made the fixes against the latest version 1.4 from sourceforge, but I think they would be easy to apply to the version 1.1 currently in Debian unstable. The fixes are: 1) Add support for the clone keyword, by copying the existing code for the print keyword. Both these keywords get special treatment as they can be used boat as print 'lala' and print('lala') (Debian bug #342632) 2) Add support for highlighting the object name to the right of instanceof keyword, as in $student instanceof Person, by using the existing logic for for example the new keyword. (Debian bug #342634) 3) Make sure that keywords, for example if, don't become highlighed in $lala_if. This is done by inserting a few [^_]'s in the source code. For start of line I had to insert \\(?:^\\|[^_]\\) (non-underscore or start of line), otherwise emacs would not always mark up keywords at the start of the line (specifically emacs would mark up correctly if the keyword was there when the file was loaded, but not when the keyword was freshly written). (Debian bug #212422) Bug 3) looks somewhat like a bug which could be more elegantly fixed at a higher level in emacs, but my band-aid fix could serve in the mean-time. I tested using GNU Emacs 21.4.1. Here is some PHP code which illustrates the highlighting bugs: ?php $aa_if; $aa_if_aa; $aa_break; $aa_break_aa; $aa_print_aa; $aa_class_aa; $aa_class; $aa_self; $a_private; $a_continue; //this one is not fixed function if_a() {} function a_if() {} function private_aa() {} function continue_aa() {} class Person {} $aa instanceof Person; clone $aa; ? Regards, Thue --- lala/php-mode-1.4.0/php-mode.el 2008-01-04 01:49:18.0 +0100 +++ php-mode2.el 2008-01-26 23:02:38.0 +0100 @@ -913,7 +913,7 @@ extends for foreach global if include include_once next or require require_once return static switch then var while xor private throw catch try - instanceof catch all finally))) + catch all finally))) PHP keywords.) (defconst php-identifier @@ -944,11 +944,11 @@ ;; Fontify keywords (cons -(concat ( php-keywords \\)\\) -'font-lock-keyword-face) +(concat \\(?:^\\|[^_]\\)( php-keywords \\)\\[^_]) +'(1 font-lock-keyword-face)) ;; Fontify keywords and targets, and case default tags. - (list (break\\|case\\|continue\\)\\[ \t]*\\(-?\\(?:\\sw\\|\\s_\\)+\\)? + (list \\(?:^\\|[^_]\\)(break\\|case\\|continue\\)\\[ \t]*\\(-?\\(?:\\sw\\|\\s_\\)+\\)? '(1 font-lock-keyword-face) '(2 font-lock-constant-face t t)) ;; This must come after the one for keywords and targets. '(: (^[ \t]*\\(\\(?:\\sw\\|\\s_\\)+\\)[ \t]*:[ \t]*$ @@ -957,7 +957,11 @@ ;; treat 'print' as keyword only when not used like a function name '(\\print\\s-*( . php-default-face) - '(\\print\\ . font-lock-keyword-face) + '(\\(?:^\\|[^_]\\)(print\\)\\[^_] (1 font-lock-keyword-face)) + + ;; treat 'clone' as keyword only when not used like a function name + '(\\clone\\s-*( . php-default-face) + '(\\(?:^\\|[^_]\\)(clone\\)\\[^_] (1 font-lock-keyword-face)) ;; Fontify PHP tag '(\\?\\(php\\)? . font-lock-constant-face) @@ -976,13 +980,13 @@ (list ;; class declaration -'([^_](class\\|interface\\)[ \t]*\\(\\(?:\\sw\\|\\s_\\)+\\)? +'(\\(?:^\\|[^_]\\)(class\\|interface\\)[ \t]*\\(\\(?:\\sw\\|\\s_\\)+\\)? (1 font-lock-keyword-face) (2 font-lock-type-face nil t)) ;; handle several words specially, to include following word, ;; thereby excluding it from unknown-symbol checks later ;; FIX to handle implementing multiple ;; currently breaks on class Foo implements Bar, Baz -'((new\\|extends\\|implements\\)\\s-+\\$?\\(\\(?:\\sw\\|\\s_\\)+\\) +'(\\(?:^\\|[^_]\\)(new\\|extends\\|implements\\|instanceof\\)\\s-+\\$?\\(\\(?:\\sw\\|\\s_\\)+\\) (1 font-lock-keyword-face) (2 font-lock-type-face)) ;; function declaration @@ -991,7 +995,7 @@ (2 font-lock-function-name-face nil t)) ;; class hierarchy -'(\\(self\\|parent\\)\\W (1 font-lock-constant-face nil nil)) +'(\\(?:^\\|[^_]\\)\\(self\\|parent\\)[^_\\w] (1 font-lock-constant-face nil nil)) ;; method and variable features '((private\\|protected\\|public\\)\\s-+\\$?\\(?:\\sw\\|\\s_\\)+
Bug#458542: /usr/bin/azureus: line 10: exec: java: not found
Yes, thanks :). Java was pointing to an old uninstalled Sun java. Don't know how it became messed up, I only used the Debian package system... Regards, Thue On Jan 11, 2008 8:48 AM, Shaun Jackman [EMAIL PROTECTED] wrote: package azureus tag 458542 unreproducible moreinfo severity 458542 important thanks Installing java-gcj-compat should provide java. What's the result of the following two commands? $ sudo update-alternatives --display java $ ls -l /etc/alternatives/java A common fix to alternatives problems is to run $ sudo update-alternatives --auto java Please tell me if you solve this issue so that I can close this bug. Cheers, Shaun On Jan 1, 2008 7:26 AM, Thue Janus Kristensen [EMAIL PROTECTED] wrote: Package: azureus Version: 3.0.3.4-2 Severity: serious Justification: Policy 3.5 I just installed azureus. It does not work, looks like a missing dependency. [EMAIL PROTECTED] ~ azureus /usr/bin/azureus: line 10: exec: java: not found [EMAIL PROTECTED] ~ which java java not found Regards, Thue -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.23.8 (SMP w/2 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages azureus depends on: ii gij [java-virtual-machine]4:4.2.1-6 The GNU Java bytecode interpreter ii gij-4.1 [java2-runtime] 4.1.2-16 The GNU Java bytecode interpreter ii gij-4.2 [java2-runtime] 4.2.1-5The GNU Java bytecode interpreter ii java-gcj-compat 1.0.76-5 Java runtime environment using GIJ ii libcommons-cli-java 1.0-11 API for working with the command l ii liblog4j1.2-java 1.2.15-2 Logging library for java ii libseda-java 3.0-3 the Staged Event-Driven Architectu ii libswt-gtk-3.3-java 3.3.1-2Standard Widget Toolkit for GTK Ja ii sun-java6-jre [java2-runtime] 6-00-2 Sun Java(TM) Runtime Environment ( azureus recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#458542: /usr/bin/azureus: line 10: exec: java: not found
Package: azureus Version: 3.0.3.4-2 Severity: serious Justification: Policy 3.5 I just installed azureus. It does not work, looks like a missing dependency. [EMAIL PROTECTED] ~ azureus /usr/bin/azureus: line 10: exec: java: not found [EMAIL PROTECTED] ~ which java java not found Regards, Thue -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.23.8 (SMP w/2 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages azureus depends on: ii gij [java-virtual-machine]4:4.2.1-6 The GNU Java bytecode interpreter ii gij-4.1 [java2-runtime] 4.1.2-16 The GNU Java bytecode interpreter ii gij-4.2 [java2-runtime] 4.2.1-5The GNU Java bytecode interpreter ii java-gcj-compat 1.0.76-5 Java runtime environment using GIJ ii libcommons-cli-java 1.0-11 API for working with the command l ii liblog4j1.2-java 1.2.15-2 Logging library for java ii libseda-java 3.0-3 the Staged Event-Driven Architectu ii libswt-gtk-3.3-java 3.3.1-2Standard Widget Toolkit for GTK Ja ii sun-java6-jre [java2-runtime] 6-00-2 Sun Java(TM) Runtime Environment ( azureus recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#452030: uswsusp: Asks for invalid(?) CONFIG_SOFTWARE_SUSPEND kernel option
Package: uswsusp Version: 0.3~cvs20060928-7 Severity: normal I just installed uswsusp. During installation I got the message: Your kernel doesn't support userspace software suspend Your kernel doesn't support userspace sofware suspend. Please reconfigure your kernel to include CONFIG_SOFTWARE_SUSPEND=y and recompile. 3 problems: 1) Grepping through my Linux .config, there doesn't seem to be a CONFIG_SOFTWARE_SUSPEND option. (there is a CONFIG_SUSPEND option) 2) The message above is shown twice when installing the package. Once should be enough. 3) You misspelled software as sofware Regards, Thue -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.23.1 (SMP w/2 CPU cores) Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages uswsusp depends on: ii debconf [debconf-2.0] 1.5.16 Debian configuration management sy ii libc6 2.6.1-1+b1 GNU C Library: Shared libraries ii libgcrypt11 1.2.4-2 LGPL Crypto library - runtime libr ii libgpg-error0 1.4-2library for common error values an ii zlib1g 1:1.2.3.3.dfsg-6 compression library - runtime Versions of packages uswsusp recommends: ii initramfs-tools 0.90a tools for generating an initramfs -- debconf information: uswsusp/compute_checksum: false * uswsusp/no_snapshot: uswsusp/suspend_loglevel: uswsusp/no_swap: uswsusp/early_writeout: true uswsusp/image_size: uswsusp/compress: true uswsusp/create_RSA_key: false uswsusp/snapshot_device: uswsusp/RSA_key_file: /etc/uswsusp.key uswsusp/max_loglevel: uswsusp/resume_device: uswsusp/shutdown_method: platform uswsusp/encrypt: false uswsusp/splash: false uswsusp/RSA_key_bits: 1024 uswsusp/continue_without_swap: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]