Bug#649449: firmware-iwlwifi: "Card state received: HW:Kill SW:On" and "Not sending command - RF KILL"

[dayer]

Sorry for the big delay. I don't know why the email never arrived to my inbox.

The problem has continued. For example with kernel 3.16.7-ckt9-3.

dmesg after the connection has been broken:

[ 3031.670872] iwl3945 :02:00.0: Card state received: HW:Kill SW:On
[ 3031.671615] wlan0: deauthenticating from xx:xx:xx:xx:xx:xx by local
choice (Reason: 3=DEAUTH_LEAVING)
[ 3031.673602] iwl3945 :02:00.0: Not sending command - RF KILL
[ 3031.673628] iwl3945 :02:00.0: Error sending C_REM_STA:
enqueue_hcmd failed: -5
[ 3031.673636] iwl3945 :02:00.0: Error removing station xx:xx:xx:xx:xx:xx
[ 3031.673698] iwl3945 :02:00.0: Not sending command - RF KILL
[ 3031.673723] iwl3945 :02:00.0: Error sending C_QOS_PARAM:
enqueue_hcmd failed: -5
[ 3031.673729] iwl3945 :02:00.0: Not sending command - RF KILL
[ 3031.673753] iwl3945 :02:00.0: Error sending C_RXON:
enqueue_hcmd failed: -5
[ 3031.673758] iwl3945 :02:00.0: Error setting new configuration (-5).
[ 3031.673763] iwl3945 :02:00.0: Not sending command - RF KILL
[ 3031.673786] iwl3945 :02:00.0: Error sending C_RXON_ASSOC:
enqueue_hcmd failed: -5
[ 3031.673794] iwl3945 :02:00.0: Not sending command - RF KILL
[ 3031.673817] iwl3945 :02:00.0: Error sending C_RXON_ASSOC:
enqueue_hcmd failed: -5
[ 3031.673827] iwl3945 :02:00.0: Not sending command - RF KILL
[ 3031.673850] iwl3945 :02:00.0: Error sending C_RXON:
enqueue_hcmd failed: -5
[ 3031.673854] iwl3945 :02:00.0: Error setting new configuration (-5).
[ 3031.673880] iwl3945 :02:00.0: Not sending command - RF KILL
[ 3031.673885] iwl3945 :02:00.0: Error sending C_LEDS:
enqueue_hcmd failed: -5
[ 3031.673916] iwl3945 :02:00.0: Not sending command - RF KILL
[ 3031.673921] iwl3945 :02:00.0: Error sending C_RXON:
enqueue_hcmd failed: -5
[ 3031.673943] iwl3945 :02:00.0: Error setting new configuration (-5).
[ 3031.677688] iwl3945 :02:00.0: Not sending command - RF KILL
[ 3031.677697] iwl3945 :02:00.0: Error sending C_RXON:
enqueue_hcmd failed: -5
[ 3031.677721] iwl3945 :02:00.0: Error setting new configuration (-5).
[ 3031.680054] iwl3945 :02:00.0: Master Disable Timed Out, 100 usec
[ 3031.689923] cfg80211: Calling CRDA to update world regulatory domain
[ 3031.710936] cfg80211: World regulatory domain updated:
[ 3031.710941] cfg80211:  DFS Master region: unset
[ 3031.710961] cfg80211:   (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3031.710964] cfg80211:   (2402000 KHz - 2472000 KHz @ 4 KHz),
(N/A, 2000 mBm), (N/A)
[ 3031.710967] cfg80211:   (2457000 KHz - 2482000 KHz @ 4 KHz),
(N/A, 2000 mBm), (N/A)
[ 3031.710969] cfg80211:   (2474000 KHz - 2494000 KHz @ 2 KHz),
(N/A, 2000 mBm), (N/A)
[ 3031.710972] cfg80211:   (517 KHz - 525 KHz @ 8 KHz,
16 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3031.710993] cfg80211:   (525 KHz - 533 KHz @ 8 KHz,
16 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 3031.710996] cfg80211:   (549 KHz - 573 KHz @ 16 KHz),
(N/A, 2000 mBm), (0 s)
[ 3031.710998] cfg80211:   (5735000 KHz - 5835000 KHz @ 8 KHz),
(N/A, 2000 mBm), (N/A)
[ 3031.711001] cfg80211:   (5724 KHz - 6372 KHz @ 216
KHz), (N/A, 0 mBm), (N/A)


And according to rfkill:

# rfkill list all
0: Toshiba Bluetooth: Bluetooth
Soft blocked: no
Hard blocked: yes
1: phy2: Wireless LAN
Soft blocked: no
Hard blocked: yes


If I want to use another wireless interface (external) I've to disable
the iwl3945 module or networkmanager thinks that the Wi-Fi switch is
off.
It's like I switch off the physical switch. It could be a physical
problem derivative of the age of the laptop.

Regards,


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#787348: linux-image-3.16.0-4-amd64: Intel NM10/ICH7 it's not detected after 3.13.10-1

[dayer]

I've also reported this error in Kernel's Bugzilla[1] and discover the
commit that could produce the problem.

[1]: https://bugzilla.kernel.org/show_bug.cgi?id=99221


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#787348: linux-image-3.16.0-4-amd64: Intel NM10/ICH7 it's not detected after 3.13.10-1

[dayer]

Package: src:linux
Version: 3.16.7-ckt9-3
Severity: normal

Dear Maintainer,

I've tried several versions after 3.13.10-1 linux-image version without
success.
For example 3.14-1~exp1, 3.14.12-1, 3.14.15-2, 3.16.3-2, 3.16.5-1,
3.16.7-ckt9-3 (now in testing) and some in experimental like 4.0.2-1. But the
problem persists.

I put information with 3.16.0-4:

$ cat /proc/asound/cards
--- no soundcards ---

This is the result of run alsa-info.sh:

upload=true&script=true&cardinfo=
!!
!!ALSA Information Script v 0.4.64
!!

!!Script ran on: Sun May 31 17:26:21 UTC 2015


!!Linux Distribution
!!--

Debian GNU/Linux stretch/sid \n \l PRETTY_NAME="Debian GNU/Linux stretch/sid"
NAME="Debian GNU/Linux" ID=debian HOME_URL="https://www.debian.org/";
SUPPORT_URL="https://www.debian.org/support/";
BUG_REPORT_URL="https://bugs.debian.org/";


!!DMI Information
!!---

Manufacturer:  TOSHIBA
Product Name:  SATELLITE PRO U200
Product Version:   PLUA1E-011001SP
Firmware Version:  Version 3.60


!!Kernel Information
!!--

Kernel release:3.16.0-4-amd64
Operating System:  GNU/Linux
Architecture:  x86_64
Processor: unknown
SMP Enabled:   Yes


!!ALSA Version
!!

Driver version: k3.16.0-4-amd64
Library version:1.0.28
Utilities version:  1.0.28


!!Loaded ALSA modules
!!---



!!Sound Servers on this system
!!

Pulseaudio:
  Installed - Yes (/usr/bin/pulseaudio)
  Running - Yes


!!Soundcards recognised by ALSA
!!-

--- no soundcards ---


!!PCI Soundcards installed in the system
!!--

00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio
Controller (rev 02)
03:0b.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card
Reader (SD/MMC/MS/MS PRO/xD)


!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!---

00:1b.0 0403: 8086:27d8 (rev 02)
Subsystem: 1179:0001


!!Modprobe options (Sound related)
!!

snd_pcsp: index=-2
snd_usb_audio: index=-2
snd_atiixp_modem: index=-2
snd_intel8x0m: index=-2
snd_via82xx_modem: index=-2


!!Loaded sound module options
!!---


!!ALSA Device nodes
!!-

crw-rw+ 1 root audio 116,  1 May 31 18:52 /dev/snd/seq
crw-rw+ 1 root audio 116, 33 May 31 18:52 /dev/snd/timer


!!Aplay/Arecord output
!!

APLAY

aplay: device_list:268: no soundcards found...

ARECORD

arecord: device_list:268: no soundcards found...

!!Amixer output
!!-


!!Alsactl output
!!--

--startcollapse--
--endcollapse--


!!All Loaded Modules
!!--

Module
ctr
ccm
bnep
bluetooth
6lowpan_iphc
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
ip6t_REJECT
xt_hl
ip6t_rt
nf_conntrack_ipv6
nf_defrag_ipv6
ipt_REJECT
xt_LOG
xt_limit
xt_tcpudp
xt_addrtype
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
ip6table_filter
ip6_tables
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_nat_ftp
nf_nat
nf_conntrack_ftp
nf_conntrack
iptable_filter
ip_tables
x_tables
arc4
rt2800usb
rt2x00usb
rt2800lib
rt2x00lib
mac80211
cfg80211
crc_ccitt
joydev
iTCO_wdt
iTCO_vendor_support
pcmcia
coretemp
tifm_7xx1
kvm_intel
tifm_core
yenta_socket
pcmcia_rsrc
kvm
lpc_ich
mfd_core
evdev
pcspkr
psmouse
pcmcia_core
serio_raw
snd_hda_intel
toshiba_acpi
snd_hda_controller
snd_hda_codec
i915
sparse_keymap
snd_hwdep
snd_pcm
drm_kms_helper
rfkill
wmi
drm
snd_timer
rng_core
shpchp
toshiba_bluetooth
i2c_algo_bit
i2c_core
acpi_cpufreq
processor
battery
tpm_infineon
tpm_tis
tpm
ac
snd
soundcore
video
button
fuse
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
btrfs
xor
raid6_pq
sd_mod
crc_t10dif
crct10dif_generic
sg
sr_mod
cdrom
crct10dif_common
ata_generic
ata_piix
sdhci_pci
sdhci
mmc_core
firewire_ohci
firewire_core
e100
crc_itu_t
mii
libata
scsi_mod
ehci_pci
thermal
thermal_sys
uhci_hcd
ehci_hcd
usbcore
usb_common


!!ALSA/HDA dmesg
!!--

[   11.854186] [drm] Initialized i915 1.6.0 20080730 for :00:02.0 on minor
0
[   11.854380] snd_hda_intel :00:1b.0: enabling device ( -> 0002)
[   11.854832] ACPI Warning: SystemIO range
0xd828-0xd82f conflicts with OpRegion
0xd800-0xd83f (\_SB_.PCI0.FNC0.SYSR.PMIO)
(20140424/utaddress-258)
--
[   11.854934] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.855212] snd_hda_intel :00:1b.0: irq 42 for MSI/MSI-X
[   11.957900] snd_hda_intel :00:1b.0: CORB reset timeout#2, CORBRP = 65535
[   11.958184] snd_hda_intel :00:1b.0: no AFG or MFG node found
[   11.958284] snd_hda_intel :00:1b.0: no AFG or MFG node found
[   11.958378] snd_hda_intel :00:1b.0: no AFG or MFG node found
[   11.958574] snd_hda_intel :00:1b.0: no AFG or M

Bug#749325: Similar problem with ICH7

[dayer]

Hi,

I'm a similar problem with another HDA Intel.

These are the errors in my case:

[7.663820] snd_hda_intel :00:1b.0: enabling device ( -> 0002)
[7.664648] snd_hda_intel :00:1b.0: irq 42 for MSI/MSI-X
[7.723012] intel_rng: FWH not detected
[7.766751] hda-intel :00:1b.0: no codecs initialized

If I look for the module I get:

snd_hda_intel  43768  0
snd_hda_codec 100159  1 snd_hda_intel
snd_hwdep  13148  1 snd_hda_codec
snd_pcm84566  2 snd_hda_codec,snd_hda_intel
snd_timer  26614  1 snd_pcm
snd61094  5
snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore  13026  1 snd


And finally I haven't any card:

$ cat /proc/asound/cards
--- no soundcards ---


I've tried with newer kernels but the problem continues:
- 3.15.5-1~exp1
- 3.16~rc5-1~exp1

Information about my card:

$ lspci -nnvv
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High
Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Toshiba America Info Systems Device [1179:0001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
SERR- 

Bug#712075: Release 3.1.3 since 2012/08/05

[dayer]

Package: mldonkey-server
Version: 3.1.2-1
Severity: wishlist

The version 3.1.3 was released at 2012/08/05 and according to the 
changelog of the oficial website it fixs:


2012/08/05: version 3.1.3 = tag release-3-1-3

2012/07/27
7756: BT: Add support for magnet links (ygrek, jave)

2012/07/01
7813: Fix segfault on Solaris/OpenIndiana in md4 code written in C (dcoppa)
7812: FreeBSD: proper version identification (lioux)

2012/06/24
7805: Update upnp libraries
7804: new option filenames_utf8 (ygrek)
7803: pause conditions: "pause where priority < X" (ygrek)
7802: Do not leave empty files if code generation fails (ygrek)
7801: HTML: Fix content-type for 401 error (ygrek)
7800: Improve error message visibility (ygrek)
7799: HTML: fix validation errors (ygrek)
7798: Fix Mac OS X compilation (ygrek)
7797: allow build with upcoming OCaml 4.00 (ygrek)
7795: spelling fix, official language name is "OCaml" (ygrek)
7796: configure: fix non-portable use of echo (ygrek)

2012/05/23
7784: IP discover: Fix broken URL

Could you bring up to date the package?

Regards


--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#671851: lxpanel: I can't stop blink/flash/highlight in some windows sometines

[dayer]

Package: lxpanel
Version: 0.5.6-1
Severity: minor

Hi,

Sometimes I can't stop the blink in some windows. For example in Seamonkey or
Empathy. It starts to blink with notificaciones. However, sometines I can't
stop this blink when I click over the tab in the windows list. It could be very
annoying and finally I've to close the window (or program) and reopen it.

I'm using stable, but in another machine with testing I've got the same
problem.

I think it could be related to this bug[1].

Thanks.

[1]: https://bugs.launchpad.net/ubuntu/+source/lxpanel/+bug/920727



-- System Information:
Debian Release: 6.0.4
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable'), (300, 'testing'), (200, 
'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-0.bpo.2-amd64 (SMP w/4 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages lxpanel depends on:
ii  libasound21.0.25-2   shared library for ALSA applicatio
ii  libatk1.0-0   2.4.0-2ATK accessibility toolkit
ii  libc6 2.11.3-3   Embedded GNU C Library: Shared lib
ii  libcairo2 1.10.2-7~bpo60+1   The Cairo 2D vector graphics libra
ii  libfontconfig12.8.0-2.1  generic font configuration library
ii  libfreetype6  2.4.2-2.1+squeeze4 FreeType 2 font engine, shared lib
ii  libglib2.0-0  2.32.0-4   GLib library of C routines
ii  libgtk2.0-0   2.24.10-1  GTK+ graphical user interface libr
ii  libmenu-cache10.3.2-2an implementation of the freedeskt
ii  libpango1.0-0 1.29.4-3+b1Layout and rendering of internatio
ii  libx11-6  2:1.3.3-4  X11 client-side library
ii  lxmenu-data   0.1.1-1freedesktop.org menu specification
ii  zlib1g1:1.2.3.4.dfsg-3   compression library - runtime

Versions of packages lxpanel recommends:
ii  manpages-dev  3.27-1 Manual pages about using GNU/Linux

Versions of packages lxpanel suggests:
ii  chromium-br 6.0.472.63~r59945-5+squeeze6 Chromium browser
ii  google-chro 18.0.1025.168-r134367The web browser from Google
ii  iceape [www 2.7.3-1~bpo60+1  The Iceape Internet Suite
ii  iceweasel [ 11.0-1~bpo60+1   Web browser based on Firefox
ii  lxsession [ 0.4.4-3  a lightweight X11 session manager
ii  menu2.1.44   generates programs menu for all me
ii  opera [www- 11.62.1347   Fast and secure web browser and In
ii  w3m [www-br 0.5.2-9  WWW browsable pager with excellent

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#649449: firmware-iwlwifi: "Card state received: HW:Kill SW:On" and "Not sending command - RF KILL"

[dayer]

Hi,

I'm testing a few days ago from kernel 2.6.32-5-amd64. The problems
cotinue and $dmesg prints:


[ 1452.312363] iwl3945 :02:00.0: Card state received: HW:Kill SW:On
[ 1452.312616] iwl3945 :02:00.0: Error sending REPLY_QOS_PARAM:
enqueue_hcmd failed: -5
[ 1452.312626] iwl3945 :02:00.0: Error sending REPLY_RXON_ASSOC:
enqueue_hcmd failed: -5
[ 1452.312649] iwl3945 :02:00.0: Error setting RXON_ASSOC
configuration (-5).
[ 1452.312656] iwl3945 :02:00.0: Error sending REPLY_RXON_ASSOC:
enqueue_hcmd failed: -5
[ 1452.312679] iwl3945 :02:00.0: Error setting RXON_ASSOC
configuration (-5).
[ 1452.322082] wlan0: deauthenticating from xx:xx:xx:xx:xx:xx by local
choice (reason=3)
[ 1452.373469] iwl3945 :02:00.0: Error sending REPLY_LEDS_CMD:
enqueue_hcmd failed: -5
[ 1452.440292] usb 3-2: USB disconnect, address 3
[ 1454.936878] Registered led device: iwl-phy0::radio
[ 1454.937137] Registered led device: iwl-phy0::assoc
[ 1454.937173] Registered led device: iwl-phy0::RX
[ 1454.937401] Registered led device: iwl-phy0::TX
[ 1459.592125] iwl3945 :02:00.0: Failed to get channel info for
channel 140 [0]
[ 1463.276109] iwl3945 :02:00.0: Failed to get channel info for
channel 140 [0]
[ 1463.279665] wlan0: direct probe to AP xx:xx:xx:xx:xx:xx (try 1)
[ 1463.281662] wlan0: direct probe responded
[ 1463.281687] wlan0: authenticate with AP xx:xx:xx:xx:xx:xx (try 1)
[ 1463.283741] wlan0: authenticated
[ 1463.287335] wlan0: associate with AP xx:xx:xx:xx:xx:xx (try 1)
[ 1463.290924] wlan0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x471
status=0 aid=1)
[ 1463.290927] wlan0: associated
[ 1472.271993] iwl3945 :02:00.0: Card state received: HW:Kill SW:On
[ 1472.272256] iwl3945 :02:00.0: Error sending REPLY_QOS_PARAM:
enqueue_hcmd failed: -5
[ 1472.284104] wlan0: deauthenticating from 5c:d9:98:ea:d8:02 by local
choice (reason=3)
[ 1472.332103] iwl3945 :02:00.0: Error sending REPLY_LEDS_CMD:
enqueue_hcmd failed: -5
[ 1474.931471] Registered led device: iwl-phy0::radio
[ 1474.931703] Registered led device: iwl-phy0::assoc
[ 1474.931777] Registered led device: iwl-phy0::RX
[ 1474.931869] Registered led device: iwl-phy0::TX

Best regards.

El lun, 21-11-2011 a las 05:29 +, Ben Hutchings escribió:
> On Mon, 2011-11-21 at 00:32 +0100, dayer wrote:
> > Package: firmware-iwlwifi
> > Version: 0.34
> > Severity: important
> > 
> > Hi,
> > 
> > I'm using a Toshiba laptop model U200-191 with a wireless card "Intel
> > Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)"
> > (according to lspci). My laptop has several disconnections, it depends on 
> > the
> > network and this situation happens randomly. A day the connection goes very
> > well, without cuts, but next day, with the same network, position and power
> > signal, there're several disconnections. Now, for example, according on
> > iwconfig the network has Link Quality=54/70  and Signal level=-56 dBm, and 
> > it
> > has been several cuts.
> > 
> > I paste the dmesg ouput using Network Manager and with Network Manager 
> > stopped
> > and using only a shell to configure the wireless lan. I've left out the 
> > BSSID.
> [...]
> > Sometimes the solution is turn off and turn on again the Wi-Fi switch. I 
> > know
> > the problem six or eight months ago.
> 
> The firmware for this device was last changed 2 years ago; therefore
> this is not likely to be a firmware bug.  It might be a bug in the
> driver, or a hardware problem (the wifi switch not making a good
> connection).  Could you test the kernel package from stable
> (linux-image-2.6.32-5-amd64)?
> 
> Ben.
> 

-- 
http://elhistorias.com




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#649449: firmware-iwlwifi: "Card state received: HW:Kill SW:On" and "Not sending command - RF KILL"

[dayer]

Package: firmware-iwlwifi
Version: 0.34
Severity: important

Hi,

I'm using a Toshiba laptop model U200-191 with a wireless card "Intel
Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)"
(according to lspci). My laptop has several disconnections, it depends on the
network and this situation happens randomly. A day the connection goes very
well, without cuts, but next day, with the same network, position and power
signal, there're several disconnections. Now, for example, according on
iwconfig the network has Link Quality=54/70  and Signal level=-56 dBm, and it
has been several cuts.

I paste the dmesg ouput using Network Manager and with Network Manager stopped
and using only a shell to configure the wireless lan. I've left out the BSSID.

With Network Manager (two cuts):
-
[31806.069228] iwl3945 :02:00.0: Card state received: HW:Kill SW:On
[31806.069416] iwl3945 :02:00.0: Not sending command - RF KILL
[31806.069422] iwl3945 :02:00.0: Error sending REPLY_QOS_PARAM:
enqueue_hcmd failed: -5
[31806.069446] iwl3945 :02:00.0: Not sending command - RF KILL
[31806.069451] iwl3945 :02:00.0: Error sending REPLY_RXON_ASSOC:
enqueue_hcmd failed: -5
[31806.069459] iwl3945 :02:00.0: Not sending command - RF KILL
[31806.069480] iwl3945 :02:00.0: Error sending REPLY_RXON: enqueue_hcmd
failed: -5
[31806.069484] iwl3945 :02:00.0: Error setting new configuration (-5).
[31806.069489] iwl3945 :02:00.0: Not sending command - RF KILL
[31806.069510] iwl3945 :02:00.0: Error sending REPLY_RXON_ASSOC:
enqueue_hcmd failed: -5
[31806.069516] wlan0: deauthenticating from xx:xx:xx:xx:xx:xx by local choice
(reason=3)
[31806.092075] iwl3945 :02:00.0: Not sending command - RF KILL
[31806.092079] iwl3945 :02:00.0: Error sending REPLY_REMOVE_STA:
enqueue_hcmd failed: -5
[31806.092101] iwl3945 :02:00.0: Error removing station xx:xx:xx:xx:xx:xx
[31806.100185] iwl3945 :02:00.0: Not sending command - RF KILL
[31806.100192] iwl3945 :02:00.0: Error sending REPLY_RXON_ASSOC:
enqueue_hcmd failed: -5
[31806.100220] iwl3945 :02:00.0: Not sending command - RF KILL
[31806.100226] iwl3945 :02:00.0: Error sending REPLY_LEDS_CMD: enqueue_hcmd
failed: -5
[31806.100253] iwl3945 :02:00.0: Not sending command - RF KILL
[31806.100259] iwl3945 :02:00.0: Error sending REPLY_RXON: enqueue_hcmd
failed: -5
[31806.100282] iwl3945 :02:00.0: Error setting new configuration (-5).
[31806.100354] cfg80211: Calling CRDA to update world regulatory domain
[31806.116188] iwl3945 :02:00.0: Not sending command - RF KILL
[31806.116214] iwl3945 :02:00.0: Error sending REPLY_RXON: enqueue_hcmd
failed: -5
[31806.116221] iwl3945 :02:00.0: Error setting new configuration (-5).
[31806.120091] iwl3945 :02:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL =
0x040003DD
[31817.434865] wlan0: authenticate with xx:xx:xx:xx:xx:xx (try 1)
[31817.436629] wlan0: authenticated
[31817.440387] wlan0: associate with xx:xx:xx:xx:xx:xx (try 1)
[31817.449451] wlan0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x471 status=0
aid=1)
[31817.449455] wlan0: associated
[31896.713864] iwl3945 :02:00.0: Card state received: HW:Kill SW:On
[31896.714089] iwl3945 :02:00.0: Not sending command - RF KILL
[31896.714096] iwl3945 :02:00.0: Error sending REPLY_QOS_PARAM:
enqueue_hcmd failed: -5
[31896.714123] iwl3945 :02:00.0: Not sending command - RF KILL
[31896.714128] iwl3945 :02:00.0: Error sending REPLY_RXON_ASSOC:
enqueue_hcmd failed: -5
[31896.714156] iwl3945 :02:00.0: Not sending command - RF KILL
[31896.714179] iwl3945 :02:00.0: Error sending REPLY_RXON: enqueue_hcmd
failed: -5
[31896.714185] iwl3945 :02:00.0: Error setting new configuration (-5).
[31896.714191] iwl3945 :02:00.0: Not sending command - RF KILL
[31896.714214] iwl3945 :02:00.0: Error sending REPLY_RXON_ASSOC:
enqueue_hcmd failed: -5
[31896.714222] wlan0: deauthenticating from xx:xx:xx:xx:xx:xx by local choice
(reason=3)
[31896.748067] iwl3945 :02:00.0: Not sending command - RF KILL
[31896.748072] iwl3945 :02:00.0: Error sending REPLY_REMOVE_STA:
enqueue_hcmd failed: -5
[31896.748094] iwl3945 :02:00.0: Error removing station xx:xx:xx:xx:xx:xx
[31896.761516] iwl3945 :02:00.0: Not sending command - RF KILL
[31896.761524] iwl3945 :02:00.0: Error sending REPLY_RXON_ASSOC:
enqueue_hcmd failed: -5
[31896.761551] iwl3945 :02:00.0: Not sending command - RF KILL
[31896.761556] iwl3945 :02:00.0: Error sending REPLY_LEDS_CMD: enqueue_hcmd
failed: -5
[31896.761586] iwl3945 :02:00.0: Not sending command - RF KILL
[31896.761609] iwl3945 :02:00.0: Error sending REPLY_RXON: enqueue_hcmd
failed: -5
[31896.761615] iwl3945 :02:00.0: Error setting new configuration (-5).
[31896.761706] cfg80211: Calling CRDA to update world regulatory domain
[31896.776127] iwl3945 :02:00.0: Not sending command - RF KILL
[31896.776154] 

Bug#628080: xserver-xorg-video-radeon: Low performance after a period of inactivity

[dayer]

El mié, 14-09-2011 a las 11:23 +0200, Michel Dänzer escribió:
> On Mit, 2011-09-14 at 10:33 +0200, dayer wrote: 
> 
> Do these messages also appear if you boot with irqpoll? Are you sure it
> takes effect?

 Yes, I put "irqpoll" at grub's boot but I can't understand why irqpoll doesn't 
work.
Yesterday and today I'm trying with "options radeon modeset=0"
in /etc/modprobe.d/radeon-kms.conf, and although the performance is odd
according to the program (Chromium goes smoother than Iceweasel), the
direct rendering is on and there is only a problem with an IRQ:

dmesg:
--

[13075.848407] irq 16: nobody cared (try booting with the "irqpoll" option)
[13075.848421] Pid: 0, comm: swapper Tainted: G   O 3.0.0-1-amd64 #1
[13075.848426] Call Trace:
[13075.848430][] ? __report_bad_irq+0x2c/0xb7
[13075.848455]  [] ? note_interrupt+0x174/0x1f9
[13075.848464]  [] ? handle_irq_event_percpu+0x166/0x184
[13075.848473]  [] ? acpi_pm_read+0x5/0x8
[13075.848482]  [] ? timekeeping_get_ns+0xd/0x2a
[13075.848490]  [] ? handle_irq_event+0x34/0x52
[13075.848498]  [] ? arch_local_irq_save+0x14/0x1d
[13075.848506]  [] ? handle_fasteoi_irq+0x79/0x9b
[13075.848514]  [] ? handle_irq+0x1a/0x20
[13075.848521]  [] ? do_IRQ+0x45/0x9e
[13075.848529]  [] ? common_interrupt+0x13/0x13
[13075.848534][] ? native_safe_halt+0x2/0x3
[13075.848549]  [] ? default_idle+0x49/0x83
[13075.848556]  [] ? cpu_idle+0xa2/0xc4
[13075.848565]  [] ? start_kernel+0x3bd/0x3c8
[13075.848573]  [] ? x86_64_start_kernel+0x102/0x10f
[13075.848578] handlers:
[13075.848624] [] radeon_driver_irq_handler
[13075.848630] Disabling IRQ #16

Some lines have changed and they're different if KMS is on, but
according to /proc/interrups IRQ #16 is also from radeon.

> Since several IRQs are affected, I suspect this is a fundamental problem
> in the kernel/BIOS rather than in any driver.

I think the problem is my graphic card ATI Gigabyte HD4650 AGP 1GB. I'm
using it one or two years without problem until April 2011, when IRQs
problems started. In Windows XP there's no problem. And if I try
connecting an old ATI 9600 AGP 256MB in Linux there's no problem with
IRQs.

-- 
http://elhistorias.com





-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#628080: xserver-xorg-video-radeon: Low performance after a period of inactivity

[dayer]

El vie, 17-06-2011 a las 11:15 +0200, Michel Dänzer escribió:
> On Sam, 2011-06-04 at 17:34 +0200, dayer wrote: 
> 
> Do the radeon numbers stop increasing after the messages about IRQ 16?
>
Yes, it does. After the messages about IRQ 16 radeon numbers stops, and
after the messages about IRQ 17 this line also stops increasing.
> 
> Probably can't hurt to try. Note that as IRQ 17 is also affected, this
> may not be a radeon specific problem at all but a more general IRQ
> problem on your system.
>
I'am testing it now with "irqpoll" and without "radeon agpmode=-1", and
there's no problem. Irqpoll looks the solution in my case.
> 
> Something's going wrong with that option, resulting in the DRI being
> disabled completely. As you've experienced with empathy, this is not
> desirable for various reasons.
> 
> 

-- 
http://elhistorias.com




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#628080: xserver-xorg-video-radeon: Low performance after a period of inactivity

[dayer]

El mié, 01-06-2011 a las 09:14 +0200, Michel Dänzer escribió: 
> On Fre, 2011-05-27 at 01:30 +0200, dayer wrote:

> Are you using an OpenGL compositing manager such as gnome-shell or compiz?

Now I'm using Metacity. However I've had the same problem with Mutter.

> 
> When the problem occurs, do the radeon numbers in /proc/interrupts increase?

Yes. "/proc/interrupts" contains:

   CPU0   
  0: 44   IO-APIC-edge  timer
  1:  4   IO-APIC-edge  i8042
  6:  3   IO-APIC-edge  floppy
  7:  1   IO-APIC-edge  parport0
  8:  0   IO-APIC-edge  rtc0
  9:  0   IO-APIC-fasteoi   acpi
 12:  6   IO-APIC-edge  i8042
 14:  13995   IO-APIC-edge  pata_via
 15:  0   IO-APIC-edge  pata_via
 16: 41   IO-APIC-fasteoi   radeon
 17:  556661064   IO-APIC-fasteoi   skge@pci::00:0a.0, hda_intel
 20:  33647   IO-APIC-fasteoi   sata_via
 21:  32145   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb2,
uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5
 22: 63   IO-APIC-fasteoi   VIA8237
NMI: 40   Non-maskable interrupts
LOC:1981218   Local timer interrupts
SPU:  0   Spurious interrupts
PMI: 40   Performance monitoring interrupts
IWI:  0   IRQ work interrupts
RES:  0   Rescheduling interrupts
CAL:  0   Function call interrupts
TLB:  0   TLB shootdowns
TRM:  0   Thermal event interrupts
THR:  0   Threshold APIC interrupts
MCE:  0   Machine check exceptions
MCP: 16   Machine check polls
ERR:  1
MIS:  0

The radeon numbers are increasing and the end this causes these lines in
dmesg (and the system begins to run slow):

[ 1679.754669] irq 16: nobody cared (try booting with the "irqpoll"
option)
[ 1679.754682] Pid: 0, comm: swapper Tainted: G   O
2.6.39-1-amd64 #1
[ 1679.754688] Call Trace:
[ 1679.754692][] ? __report_bad_irq+0x3a/0xa2
[ 1679.754715]  [] ? note_interrupt+0x168/0x1da
[ 1679.754724]  [] ? handle_irq_event_percpu
+0x171/0x18f
[ 1679.754733]  [] ? __do_softirq+0x13b/0x19e
[ 1679.754743]  [] ? timekeeping_get_ns+0xe/0x2e
[ 1679.754750]  [] ? handle_irq_event+0x34/0x52
[ 1679.754759]  [] ? sched_clock_idle_wakeup_event
+0x12/0x1c
[ 1679.754767]  [] ? handle_fasteoi_irq+0x82/0xa4
[ 1679.754775]  [] ? handle_irq+0x1a/0x23
[ 1679.754781]  [] ? do_IRQ+0x45/0xaa
[ 1679.754790]  [] ? common_interrupt+0x13/0x13
[ 1679.754794][] ? native_safe_halt+0x2/0x3
[ 1679.754810]  [] ? default_idle+0x4b/0x85
[ 1679.754817]  [] ? cpu_idle+0xab/0xe1
[ 1679.754826]  [] ? start_kernel+0x3e0/0x3eb
[ 1679.754835]  [] ? x86_64_start_kernel+0x102/0x10f
[ 1679.754839] handlers:
[ 1679.754843] [] (radeon_driver_irq_handler_kms
+0x0/0x1c [radeon])
[ 1679.754896] Disabling IRQ #16
[ 1679.754896] Disabling IRQ #16

And another messages appear later also in dmesg:

[ 4984.745387] irq 17: nobody cared (try booting with the "irqpoll"
option)
[ 4984.745396] Pid: 2358, comm: firefox-bin Tainted: G   O
2.6.39-1-amd64 #1
[ 4984.745398] Call Trace:
[ 4984.745401][] ? __report_bad_irq+0x3a/0xa2
[ 4984.745414]  [] ? note_interrupt+0x168/0x1da
[ 4984.745419]  [] ? handle_irq_event_percpu
+0x171/0x18f
[ 4984.745423]  [] ? __do_softirq+0x13b/0x19e
[ 4984.745426]  [] ? handle_irq_event+0x34/0x52
[ 4984.745430]  [] ? handle_fasteoi_irq+0x82/0xa4
[ 4984.745433]  [] ? handle_irq+0x1a/0x23
[ 4984.745436]  [] ? do_IRQ+0x45/0xaa
[ 4984.745440]  [] ? common_interrupt+0x13/0x13
[ 4984.745442][] ? system_call_fastpath
+0x16/0x1b
[ 4984.745447] handlers:
[ 4984.745448] [] (skge_intr+0x0/0x3e9 [skge])
[ 4984.745474] [] (azx_interrupt+0x0/0x13c
[snd_hda_intel])
[ 4984.745479] Disabling IRQ #17

I'm thinking about try booting with the "irqpoll". What do you think?

> 
> 

> It's a long shot, but maybe you could try if a 2.6.39 kernel helps.

It's the same.

> 
> 
> 
> Does booting with radeon.agpmode=-1 on the kernel command line help?
> 
Yes, it helps! The performance doesn't fall already, although...

With it in /var/log/Xorg.0.log appears a new warning in addition to previous:

(WW) RADEON(0): Direct rendering disabled

And I can't run empathy due to:

failed to create drawable
Unable to select the newly created GLX context
Run 'empathy --help' to see a full list of available command line options.
(empathy:17688): empathy-WARNING **: Error in empathy init: Unable to select 
the newly created GLX context


But the solution is better than the previous situation.

-- 
http://elhistorias.com






-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#605760: pcmanfm: doesn't start anymore

[dayer]

I'm using PCManFM from PPA for LXDE, in Launchpad[1] for avoid the problem:
pcmanfm_0.9.8+git-6240436419-0ubuntu1~maverick1_amd64.deb)

Debian testing.
libfm0-0.1.14-2
Linux 2.6.38-2-amd64 #1 SMP Thu Apr 7 04:28:07 UTC 2011 x86_64 GNU/Linux

[1] https://launchpad.net/~lxde/+archive/ppa
-- 
elhistorias.com



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#594969: gthumb doesn't open automatically my digital camera

[dayer]

Hi,

are you installed gnome-volume-manager? It is accessible in System →
Preferences → Removable Media and it contains an option to run a command
when a digital camera is detects (gthumb --import-photos).

Regards!

-- 
http://elhistorias.com




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#597860: texmaker: Accents in Spanish with UTF-8

[dayer]

Hi again,

I just tested in another system that is with lenny and "es_ESUTF-8"
and the same problem happens. Accents no longer appear well when
Texmaker suggests auto complete functions, and this fix it if I click
outside the writting box and then I write again.

Regards.

-- 
elhistorias.com



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#597860: texmaker: Accents in Spanish with UTF-8

[dayer]

Hi,

yes. I have tried with a new user and the problem continues. By
moment I can't test it in a fresh system install, sorry, but I have
found another people with the same problem [1][in Catalan and Spanish].
This people fix the error doing clic with the mouse out of writting
area and return cursor to area text.

Regards.

[1]
http://www.gnulinux.cat/2010/07/codificacio-de-caracters-amb-texmaker/

El Thu, 23 Sep 2010 12:39:39 -0500
Ruben Molina  escribió:
> 
> I'm afraid I was unable to reproduce this behavior.  Did you tried to
> reproduce it in a clean environment? Does it happens with a fresh
> user?


-- 
http://elhistorias.com


signature.asc
Description: PGP signature

Bug#597860: texmaker: Accents in Spanish with UTF-8

[dayer]

Package: texmaker
Version: 1.9.9-2
Severity: minor

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

Hi,

I'm spanish and I'm using Texmaker in Debian testing version, now
1.9.9-2, for write documents in Spanish language with UTF-8 encoding. I've
Texmaker editor configuration in UTF-8 for font encoding, but when I'm writting
tex files some times the accents appear as " 'a " and not as " á ". When this
happens I go to editor configuration and withouth change none option I save the
settings and return to the file, and then I can continue writting with accents
correctly, with "á" and not with " 'a ". Good. However a few lines after
there's a moment again that I write an accent and it appears " 'a " again.

I've tried with 1.9.9-2 and 2.0-1 (from unstable) versions, and the
problem is the same. My preamble definitions is:

\usepackage[utf8]{inputenc}
\usepackage[spanish]{babel}
\usepackage[T1]{fontenc}

and also occurs if I use "\usepackage[utf8x]{inputenc}" for encoding.
Due to I think this is a Texmaker problem and not from LaTeX.

"$cat /etc/default/locale" returns "LANG=es_ES.UTF-8". For this I've
tried in "Editor → Editor font encoding" with "System", but the problem
continues.

I have found that this could be problem with gnome system language
configuration and uncheck "enable support to enter complex characters" at
System → Administration → Language Support in Ubuntu, but in Debian this
application doesn't exist.

Could you help me?

Regards.



- -- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (800, 'unstable'), (750, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages texmaker depends on:
ii  libc6   2.11.2-5 Embedded GNU C Library: Shared lib
ii  libgcc1 1:4.4.4-8GCC support library
ii  libqt4-network  4:4.6.3-1+b1 Qt 4 network module
ii  libqt4-xml  4:4.6.3-1+b1 Qt 4 XML module
ii  libqtcore4  4:4.6.3-1+b1 Qt 4 core module
ii  libqtgui4   4:4.6.3-1+b1 Qt 4 GUI module
ii  libstdc++6  4.4.4-8  The GNU Standard C++ Library v3

Versions of packages texmaker recommends:
ii  aspell0.60.6-4   GNU Aspell spell-checker
ii  asymptote 2.02-2 script-based vector graphics langu
ii  ghostscript   8.71~dfsg2-6   The GPL Ghostscript PostScript/PDF
ii  myspell-en-us [myspell-di 1:3.2.1-2  English_american dictionary for my
ii  myspell-es [myspell-dicti 1.10-9 Spanish dictionary for myspell
ii  netpbm2:10.0-12.2+b1 Graphics conversion tools between 
ii  psutils   1.17-27A collection of PostScript documen
ii  texlive-latex-extra   2009-9 TeX Live: LaTeX supplementary pack
ii  texmaker-data 1.9.9-2Texmaker LaTeX editor -- arch-inde

texmaker suggests no packages.

- -- no debconf information

-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.10 (GNU/Linux)

iEYEARECAAYFAkybg3MACgkQZ2Yp3M5Sh117SgCdGrSO3BSF4t/QfRTFX8kKxXNs
AfQAnjqy02kGZicADZ93UO6xrN2SSArF
=YnUJ
-END PGP SIGNATURE-



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#592374: qwit: crash with OAuth

[dayer]

Hi,

Thank you very much José María! I have checked with the package as
suggested by José María, libqca2-plugin-ossl, and now OAuth works very
well.

-- 
http://elhistorias.com



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#592374: qwit: crash with OAuth

[dayer]

El Tue, 10 Aug 2010 15:51:29 +0200
Carlos Galisteo  escribió:
> On Mon, Aug 9, 2010 at 9:48 PM, Carlos Galisteo
>  wrote:
> 
> 
> Well, I have this one.
> 
> As I thought, it is a problem with an empty tweets widget (empty
> vector).
> 
> As you can see in the attached patch it can be easily skipped just not
> going though this lines on the first execution. (Obviously this is a
> proof of concept I'll send to upstream so he can implement a cleaner
> fix).
> 
> Alternatively, if you don't want to recompile, you can just edit
> ~/.qwit2/messages, and change '1\*\size' from 0 to 1. It'll allow you
> to run the application for the first time.
> 
> Please confirm this workaround is working for you and if you are able
> to reproduce the "HMAC(SHA1) is not supported" issue.
> 
> Thanks.
> 
> 

Hi. I have tried your solution about changes in
~/.qwit2/messages, and it goes very well.

I have deleted all qwit configuration files, open qwit (Debian
package version), configure and it crashs. Then I have done your changes
in "messages" files, open qwit again and it runs ok.

Now I can return to OAuth problem with HMAC(SHA1).

Thank you!


-- 
http://elhistorias.com



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#592374: qwit: crash with OAuth

[dayer]

Curiosity: I have purged qwit and his dependencies libqca2 and
libqoauth1.
Then I have copied libqca.so.2 and libqoauth.so.1 from
qwit-1.1-pre-x86_64 to /usr/lib. But it's the same.
$ ./qwit
Fatal: HMAC(SHA1) is not supported!

I have tried
# aptitude install libqtcore4 -t unstable
but...
No se instalará, actualizará o eliminará ningún paquete.


-- 
http://elhistorias.com



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#592374: qwit: crash with OAuth

[dayer]

El Mon, 9 Aug 2010 20:32:04 +0200
Carlos Galisteo  escribió:
> On Mon, Aug 9, 2010 at 7:53 PM, dayer  wrote:
> 
> There is something weird with your libqoauth1 version. It seems that
> 1.0-2 is hurd-i386 specific [1], but you seem to be running Linux
> 2.6.32-5-amd64.  Could you confirm that you have the correct
> libqoauth1 installed? (1.0.1-1)
> 
>  I'm running exactly the same kernel/arch and related packages
> versions (except for libqoauth1) and I can't reproduce any of those
> crashes.
> 
>  Any additional info about your environment would be appreciated in
> order to try to reproduce this bug.
> 
> Thanks.
> 
> 
> 
> [1]http://packages.debian.org/sid/libqoauth1
> 
> 

Ok. I have done:
# aptitude purge libqca2 libqoauth1 qwit
# aptitude install qwit -t unstable
(because libqoauth1 1.0.1-1 is from unstable and I use testing with
ftp.es.debian.org repositories)
# dpkg -l | grep libqoauth1
ii  libqoauth1
1.0.1-1   Qt-based client implementation of the OAuth
$ locate qwit
(and delete ~/.qwit2 and ~/.config/arti/qwit2.conf
$ qwit
(and configure for Twitter account WITHOUT OAuth)
Crash with output:
Fatal: ASSERT failure in QVector::operator[]: "index out of range",
file /usr/include/qt4/QtCore/qvector.h, line 346

Then I download the last qwit version from author web
(qwit-1.1-pre-x86_64).
Delete configuration file.
$ ~/qwit-1.1-pre-x86_64/qwit
Configure WITHOUT OAuth and all goes very well.

I think this is problem with config file that debian version creates.

Now I proceed to testing OAuth.
$ ~/qwit-1.1-pre-x86_64/qwit
I configure Twitter account WITH OAuth and I obtain the:
Fatal: HMAC(SHA1) is not supported!

And now if I want to can use qwit I have to delete configuration file
and open qwit (1.1 version) but use normal authentication.

Could be someone for QT4 testing version? Do you use testing or
unstable?

Thanks for all.

-- 
http://elhistorias.com



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#592374: qwit: crash with OAuth

[dayer]

El Mon, 9 Aug 2010 19:32:45 +0200
Carlos Galisteo  escribió:
> On Mon, Aug 9, 2010 at 7:17 PM, dayer  wrote:
> 
> > I don't know if this is qwit problem or maybe libqoauth1.
> 
> Could you please check if libqca2 is installed on your system? (dpkg
> -l |grep qca)
> 
> Thanks.
> 

Yes. It return:

ii  libqca2
2.0.2-1   libraries for the Qt Cryptographic
Architect

I have tried to purge qwit and his dependences but now this is worse
due to although I use plain-text authorization and any notification
system qwit crash with:

Fatal: ASSERT failure in QVector::operator[]: "index out of range",
file /usr/include/qt4/QtCore/qvector.h, line 346

like someone says at qwit issues[1].

Thanks

[1] http://code.google.com/p/qwit/issues/detail?id=155

-- 
http://elhistorias.com



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#592374: qwit: crash with OAuth

[dayer]

Package: qwit
Version: 1.0+svn346-1
Severity: normal

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

When I try to add a Twitter account qwit crash if I push in Authorize button.
Twitter account for "Plain-text authorization" goes very well.

This is the console output:

lun ago 9 19:15:27 2010 Warning: QMetaObject::connectSlotsByName: No matching
signal for on_add_friend(QString)
lun ago 9 19:15:27 2010 Warning: QMetaObject::connectSlotsByName: No matching
signal for on_unfollow_friend(QString,UserMgmtWidgetItem*)
lun ago 9 19:15:27 2010 Warning: QMetaObject::connectSlotsByName: No matching
signal for on_block_friend(QString,UserMgmtWidgetItem*)
lun ago 9 19:15:27 2010 Warning: QMetaObject::connectSlotsByName: No matching
signal for on_follow_follower(QString,UserMgmtWidgetItem*)
lun ago 9 19:15:27 2010 Warning: QMetaObject::connectSlotsByName: No matching
signal for on_unfollow_follower(QString,UserMgmtWidgetItem*)
lun ago 9 19:15:27 2010 Warning: QMetaObject::connectSlotsByName: No matching
signal for on_block_follower(QString,UserMgmtWidgetItem*)
lun ago 9 19:15:27 2010 Warning: QMetaObject::connectSlotsByName: No matching
signal for on_unblock_user(QString,UserMgmtWidgetItem*)
lun ago 9 19:15:27 2010 Warning: QLayout: Attempting to add QLayout "" to
FriendshipsMgmtPage "", which already has a layout
lun ago 9 19:15:27 2010 Warning: QLayout: Attempting to add QLayout "" to
MainWindow "MainWindow", which already has a layout
lun ago 9 19:15:32 2010 Fatal: HMAC(SHA1) is not supported!
Abortado

I don't know if this is qwit problem or maybe libqoauth1.



- -- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (800, 'unstable'), (750, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages qwit depends on:
ii  libc6 2.11.2-2   Embedded GNU C Library: Shared lib
ii  libgcc1   1:4.4.4-8  GCC support library
ii  libqoauth11.0-2  Qt-based client implementation of 
ii  libqt4-network4:4.6.3-1  Qt 4 network module
ii  libqt4-xml4:4.6.3-1  Qt 4 XML module
ii  libqtcore44:4.6.3-1  Qt 4 core module
ii  libqtgui4 4:4.6.3-1  Qt 4 GUI module
ii  libstdc++64.4.4-8The GNU Standard C++ Library v3

qwit recommends no packages.

qwit suggests no packages.

- -- no debconf information

-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.10 (GNU/Linux)

iEYEARECAAYFAkxgOC4ACgkQZ2Yp3M5Sh11PfwCfUlRDCpAimB7vqy3Ek6Zu5KO7
dogAoKJyxF9QC3uFpZgwLzdYdsjV9Itw
=agK1
-END PGP SIGNATURE-



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#576526: incompatible with Icedove 3

[dayer]

Now with Icedove 3.0.4 already in testing, neither.

-- 
---
«Decídle al Duque que agradecemos sus palabras, pero este es un Tercio
español»
elhistorias.com



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#535548: requesting more info

[dayer]

Hello,

this bug continue with the new version 10.0.32.18 also, at least in my 
case. But the solution with the patch goes very well with this version also.


Regards

--
---
"Decidle al Duque que agradecemos sus palabras, pero este es un Tercio 
español"

elhistorias.com



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#535548: flashplugin-nonfree: Another possible solution

[dayer]

Very thank you roma1390!!!

I have tried your solution and Iceweasel doesn't fail :)

And I have found another possible solution, from Maks Verver, in this 
thread: http://bbs.archlinux.org/viewtopic.php?pid=588020


I attach file with instructions into the comments. This solution doesn't 
need none script for load.


--
---
"Decidle al Duque que agradecemos sus palabras, pero este es un Tercio 
español"

elhistorias.com
/* Simple work-around for running the 64-bit Adobe Flash plug-in version 10
   on Athlon64 processors without support for the lahf instruction.

Compile with:
cc -fPIC -shared -nostdlib -lc -oflashplugin-lahf-fix.so flashplugin-lahf-fix.c
Then place the .so file in the plug-in directory (e.g. $HOME/.mozilla/plugins)
or use LD_PRELOAD to force Firefox to load the library.

   - Maks Verver  July 2009 */

#define _GNU_SOURCE
#include 
#include 
#include 

static void sig_handler(int signal, siginfo_t *info, void *context) {
	if (signal != SIGILL) return;
	if (*(char*)info->si_addr != (char)0x9f) abort();
	greg_t *regs = ((ucontext_t*)context)->uc_mcontext.gregs;
	((char*)®s[REG_RAX])[1] = ((char*)®s[REG_EFL])[0];
	regs[REG_RIP]++;
}

static struct sigaction old_sa, new_sa = {
	.sa_flags = SA_SIGINFO,
	.sa_sigaction = &sig_handler };

int _init() { sigaction(SIGILL, &new_sa, &old_sa); return 0; }
int _fini() { sigaction(SIGILL, &old_sa, &new_sa); return 0; }

Bug#535548: flashplugin-nonfree: browser crash unexpectedly when load some pages in amd64

[dayer]

I have tried in Ubuntu 9.04 for amd64 with the install through Adobe
web and I obtain the same error with those pages:

[1]+  Instrucción ilegal (core dumped) firefox

If I try with 32 bits version, with nspluginwrapper emulation, them
sometimes the flash animations disappear for gray boxes and I obatin
with "dmesg" this:

npviewer.bin[9135]: segfault at f557f030 ip f78ae9e0 sp
ffc79e2c error 4 in libpthread-2.9.so[f78a7000+15000]

Although with this method I can also open the pages that fail with
native method for amd64.

I am beginning to think that this is a problem with some hardware, but
not with graphic card because I chaged it recently.

-- 
---
"Decidle al Duque que agradecemos sus palabras, pero este es un Tercio español"
elhistorias.com



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#535548: flashplugin-nonfree: browser crash unexpectedly when load some pages in amd64

[dayer]

Package: flashplugin-nonfree
Version: 1:2.6
Severity: normal

Hi, when I try to open some pages with flash content the browsers crash 
unexpectedly and without a specific error message.
For example, I run and I obatin:

Epiphany 2.26.1-1

$ epiphany http://www.vimeo.com
Instrucción ilegal

$ epiphany http://www.hulu.com
Instrucción ilegal

$ epiphany http://www.metacafe.com/watch/3014137/bike_fall/
Instrucción ilegal

And with Iceweasel 3.0.9-1 also:

$ iceweasel http://www.hulu.com
Instrucción ilegal

I have tried with the plugin adobe webpage, that it is the same, and I obtain 
also the same error.
Another video webpages as Youtube I can open it without errors.



-- Package-specific info:
Debian version: squeeze/sid
Architecture: amd64
Package version: 1:2.6
Adobe Flash Player version: LNX 10,0,22,87
MD5 checksums:
492d98d25886afcaf18252334d4ac4e2  
/var/cache/flashplugin-nonfree/libflashplayer-10.0.22.87.linux-x86_64.so.tar.gz
1957a3414dfbfe5f7de000ae72da4cb6  
/usr/lib/flashplugin-nonfree/libflashplayer.so
Alternatives:
flash-mozilla.so - auto mode
 link currently points to /usr/lib/flashplugin-nonfree/libflashplayer.so
/usr/lib/flashplugin-nonfree/libflashplayer.so - priority 50
Current `best' version is 
/usr/lib/flashplugin-nonfree/libflashplayer.so.
lrwxrwxrwx 1 root root 34 jul  3 10:31 
/usr/lib/mozilla/plugins/flash-mozilla.so -> /etc/alternatives/flash-mozilla.so
/usr/lib/mozilla/plugins/flash-mozilla.so: symbolic link to 
`/etc/alternatives/flash-mozilla.so'
Libraries used by libflashplayer.so:
linux-vdso.so.1 =>  (0x7fff695ff000)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x7f8a5c50b000)
libpthread.so.0 => /lib/libpthread.so.0 (0x7f8a5c2f)
libX11.so.6 => /usr/lib/libX11.so.6 (0x7f8a5bfb4000)
libXext.so.6 => /usr/lib/libXext.so.6 (0x7f8a5bda3000)
libXt.so.6 => /usr/lib/libXt.so.6 (0x7f8a5bb42000)
libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0x7f8a5b8ba000)
libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0x7f8a5b689000)
libgtk-x11-2.0.so.0 => /usr/lib/libgtk-x11-2.0.so.0 (0x7f8a5b08e000)
libgdk-x11-2.0.so.0 => /usr/lib/libgdk-x11-2.0.so.0 (0x7f8a5adec000)
libatk-1.0.so.0 => /usr/lib/libatk-1.0.so.0 (0x7f8a5abcb000)
libgdk_pixbuf-2.0.so.0 => /usr/lib/libgdk_pixbuf-2.0.so.0 
(0x7f8a5a9b)
libpangocairo-1.0.so.0 => /usr/lib/libpangocairo-1.0.so.0 
(0x7f8a5a7a3000)
libpango-1.0.so.0 => /usr/lib/libpango-1.0.so.0 (0x7f8a5a558000)
libcairo.so.2 => /usr/lib/libcairo.so.2 (0x7f8a5a2d6000)
libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0x7f8a5a08f000)
libgmodule-2.0.so.0 => /usr/lib/libgmodule-2.0.so.0 (0x7f8a59e8c000)
libdl.so.2 => /lib/libdl.so.2 (0x7f8a59c88000)
libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0x7f8a599c3000)
libnss3.so => /usr/lib/libnss3.so (0x7f8a596c3000)
libsmime3.so => /usr/lib/libsmime3.so (0x7f8a5949d000)
libssl3.so => /usr/lib/libssl3.so (0x7f8a5926d000)
libplds4.so => /usr/lib/libplds4.so (0x7f8a5906a000)
libplc4.so => /usr/lib/libplc4.so (0x7f8a58e66000)
libnspr4.so => /usr/lib/libnspr4.so (0x7f8a58c28000)
libm.so.6 => /lib/libm.so.6 (0x7f8a589a5000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x7f8a5878a000)
libc.so.6 => /lib/libc.so.6 (0x7f8a58436000)
/lib64/ld-linux-x86-64.so.2 (0x7f8a61434000)
libxcb.so.1 => /usr/lib/libxcb.so.1 (0x7f8a5821a000)
libXau.so.6 => /usr/lib/libXau.so.6 (0x7f8a58018000)
libSM.so.6 => /usr/lib/libSM.so.6 (0x7f8a57e0f000)
libICE.so.6 => /usr/lib/libICE.so.6 (0x7f8a57bf4000)
libz.so.1 => /usr/lib/libz.so.1 (0x7f8a579dd000)
libexpat.so.1 => /usr/lib/libexpat.so.1 (0x7f8a577b3000)
libXcomposite.so.1 => /usr/lib/libXcomposite.so.1 (0x7f8a575b1000)
libXdamage.so.1 => /usr/lib/libXdamage.so.1 (0x7f8a573af000)
libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0x7f8a572a9000)
libgio-2.0.so.0 => /usr/lib/libgio-2.0.so.0 (0x7f8a5702d000)
libpangoft2-1.0.so.0 => /usr/lib/libpangoft2-1.0.so.0 
(0x7f8a56dff000)
libXrender.so.1 => /usr/lib/libXrender.so.1 (0x7f8a56bf5000)
libXinerama.so.1 => /usr/lib/libXinerama.so.1 (0x7f8a569f3000)
libXi.so.6 => /usr/lib/libXi.so.6 (0x7f8a567ea000)
libXrandr.so.2 => /usr/lib/libXrandr.so.2 (0x7f8a565e1000)
libXcursor.so.1 => /usr/lib/libXcursor.so.1 (0x7f8a563d7000)
libpixman-1.so.0 => /usr/lib/libpixman-1.so.0 (0x7f8a56191000)
libdirectfb-1.2.so.0 => /usr/lib/libdirectfb-1.2.so.0 
(0x7f8a55f07000)
libfusion-1.2.so.0 => /usr/lib/libfusion-1.2.so.0 (0x7f8a55cfd000)
libdirect-1.2.so.0 

Bug#297754: Keyboard not go at Sarge CD-NETINST

[dayer]

Package: Sarge CD-NETINTS
Version: RC2

Hi, I have tried with rc1, rc2 and some daily image, because I can only install
with a kernel 2.4.x because if I select kernel 2.6.x them the keyboard not go,
and I can't select my language. I have tried also to install 2.4.x and them
compile a kernel 2.6.x but the keyboard not go. I don't know that do with this
problem withs kernel 2.6.x and nobody knows the solution.

Best regards.

---
 _
| biker at totana dot com |
 ¯