Bug#901642: marked as done (No gpg signature for SHA256SUM of "Tiny CDs, flexible USB sticks, etc.")
Good day. I used cme from e-mail received the mini.iso from the link http://ftp.nl.debian.org/debian/dists/stretch/main/installer-amd64/current/images/netboot/ but the process installation of debian streatch is blocked during the installation of my network card this because they lack the firmware required as per dmesg already reported and that I report again to the email. 18.128417] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 18.128423] r8169 :03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 18.138375] r8169 :03:00.0 eth0: RTL8168g/8111g at 0xbdbac0cb9000, 78:24:af:40:17:ea, XID 0c000800 IRQ 28 [ 18.138377] r8169 :03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 18.138775] r8169 :03:00.0 enp3s0: renamed from eth0 [ 19.347154] r8169 :03:00.0: firmware: failed to load rtl_nic/rtl8168g-2.fw (-2) [ 19.347156] r8169 :03:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2 [ 19.347158] r8169 :03:00.0 enp3s0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2) [ 19.360073] r8169 :03:00.0 enp3s0: link down [ 19.360090] r8169 :03:00.0 enp3s0: link down [ 19.360131] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready. I kindly hope that this time the missing firmware is inserted into the debianinstaller or that it is forced to change linux distribution. Il 16/06/2018 02:21, Debian Bug Tracking System ha scritto: Your message dated Sat, 16 Jun 2018 01:16:51 +0100 with message-id <20180616001651.tkoovnlbtfbyt...@tack.einval.com> and subject line Re: Bug#901642: No gpg signature for SHA256SUM of "Tiny CDs, flexible USB sticks, etc." has caused the Debian Bug report #901642, regarding No gpg signature for SHA256SUM of "Tiny CDs, flexible USB sticks, etc." to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.)
Bug#900964: debian-installer: debian missing firmware on the realteck ethernet controller witch firmware-9.4.0-amd64-netinst.iso
I apologize for the old email sent a little while ago: in this new email I will be 'more' accurate: the link of my network card is turned on but that 'despite I can not get the IP address from the router dhcp. If I try to enter it manually I can not ping the IP address of the router: this is due to the lack of the rt8169 firmware that I reported via the reportingbug. I await a response in a short time because in these situations I can not have a debian streatch perfectly installed and working. With best regards Marco Pirola Il 07/06/2018 13:48, root ha scritto: Package: debian-installer Version: debianinstaller Severity: important Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these template lines *** -- System Information: Debian Release: 9.4 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 4.9.0-6-amd64 (SMP w/4 CPU cores) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8), LANGUAGE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Dear maintener I have in posses of the mainboard asus h81m-c witch integrateth ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10). During the installation the network card is detected but I am unable to go on because in the iso firmware-9.4.0-amd64-netinst.iso the r8169 firmware is missing as specifically reported in my dmesg of which I copy here 'under the email. I request that the missing firmware is inserted in the iso. Thank you and good day. This is part of dmesg: 18.128417] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 18.128423] r8169 :03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 18.138375] r8169 :03:00.0 eth0: RTL8168g/8111g at 0xbdbac0cb9000, 78:24:af:40:17:ea, XID 0c000800 IRQ 28 [ 18.138377] r8169 :03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 18.138775] r8169 :03:00.0 enp3s0: renamed from eth0 [ 19.347154] r8169 :03:00.0: firmware: failed to load rtl_nic/rtl8168g-2.fw (-2) [ 19.347156] r8169 :03:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2 [ 19.347158] r8169 :03:00.0 enp3s0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2) [ 19.360073] r8169 :03:00.0 enp3s0: link down [ 19.360090] r8169 :03:00.0 enp3s0: link down [ 19.360131] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
Bug#900964:
The led of my etherneth istituzionale on but i dont retrovie ip Andress form router because the firmware 8169 istituzionale not present in the iso
Bug#898662: error network
This is tthe dmesg in the installation of debian streatch. [0.00] Linux version 4.9.0-6-amd64 (debian-ker...@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.82-1+deb9u3 (2018-03-02) [0.00] Command line: BOOT_IMAGE=/install.amd/vmlinuz vga=788 initrd=/install.amd/initrd.gz --- quiet [0.00] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [0.00] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [0.00] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [0.00] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [0.00] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [0.00] x86/fpu: Using 'eager' FPU context switches. [0.00] e820: BIOS-provided physical RAM map: [0.00] BIOS-e820: [mem 0x-0x0009d7ff] usable [0.00] BIOS-e820: [mem 0x0009d800-0x0009] reserved [0.00] BIOS-e820: [mem 0x000e-0x000f] reserved [0.00] BIOS-e820: [mem 0x0010-0xcaa7] usable [0.00] BIOS-e820: [mem 0xcaa8-0xcaa86fff] ACPI NVS [0.00] BIOS-e820: [mem 0xcaa87000-0xcaf1afff] usable [0.00] BIOS-e820: [mem 0xcaf1b000-0xcb42bfff] reserved [0.00] BIOS-e820: [mem 0xcb42c000-0xdd648fff] usable [0.00] BIOS-e820: [mem 0xdd649000-0xdd6d4fff] reserved [0.00] BIOS-e820: [mem 0xdd6d5000-0xdd6edfff] ACPI data [0.00] BIOS-e820: [mem 0xdd6ee000-0xddc26fff] ACPI NVS [0.00] BIOS-e820: [mem 0xddc27000-0xdeffefff] reserved [0.00] BIOS-e820: [mem 0xdefff000-0xdeff] usable [0.00] BIOS-e820: [mem 0xf800-0xfbff] reserved [0.00] BIOS-e820: [mem 0xfec0-0xfec00fff] reserved [0.00] BIOS-e820: [mem 0xfed0-0xfed03fff] reserved [0.00] BIOS-e820: [mem 0xfed1c000-0xfed1] reserved [0.00] BIOS-e820: [mem 0xfee0-0xfee00fff] reserved [0.00] BIOS-e820: [mem 0xff00-0x] reserved [0.00] BIOS-e820: [mem 0x0001-0x00021eff] usable [0.00] NX (Execute Disable) protection: active [0.00] SMBIOS 2.7 present. [0.00] DMI: ASUS All Series/H81M-C, BIOS 3602 03/26/2018 [0.00] e820: update [mem 0x-0x0fff] usable ==> reserved [0.00] e820: remove [mem 0x000a-0x000f] usable [0.00] e820: last_pfn = 0x21f000 max_arch_pfn = 0x4 [0.00] MTRR default type: uncachable [0.00] MTRR fixed ranges enabled: [0.00] 0-9 write-back [0.00] A-B uncachable [0.00] C-C write-protect [0.00] D-E7FFF uncachable [0.00] E8000-F write-protect [0.00] MTRR variable ranges enabled: [0.00] 0 base 00 mask 7E write-back [0.00] 1 base 02 mask 7FF000 write-back [0.00] 2 base 021000 mask 7FF800 write-back [0.00] 3 base 021800 mask 7FFC00 write-back [0.00] 4 base 021C00 mask 7FFE00 write-back [0.00] 5 base 021E00 mask 7FFF00 write-back [0.00] 6 base 00E000 mask 7FE000 uncachable [0.00] 7 disabled [0.00] 8 disabled [0.00] 9 disabled [0.00] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [0.00] e820: update [mem 0xe000-0x] usable ==> reserved [0.00] e820: last_pfn = 0xdf000 max_arch_pfn = 0x4 [0.00] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [9b9d800fd770] [0.00] Base memory trampoline at [9b9d80097000] 97000 size 24576 [0.00] Using GB pages for direct mapping [0.00] BRK [0x4d139000, 0x4d139fff] PGTABLE [0.00] BRK [0x4d13a000, 0x4d13afff] PGTABLE [0.00] BRK [0x4d13b000, 0x4d13bfff] PGTABLE [0.00] BRK [0x4d13c000, 0x4d13cfff] PGTABLE [0.00] BRK [0x4d13d000, 0x4d13dfff] PGTABLE [0.00] BRK [0x4d13e000, 0x4d13efff] PGTABLE [0.00] BRK [0x4d13f000, 0x4d13] PGTABLE [0.00] BRK [0x4d14, 0x4d140fff] PGTABLE [0.00] BRK [0x4d141000, 0x4d141fff] PGTABLE [0.00] RAMDISK: [mem 0x7f106000-0x7fff] [0.00] ACPI: Early table checksum verification disabled [0.00] ACPI: RSDP 0x000F0490 24 (v02 ALASKA) [0.00] ACPI: XSDT 0xDD6DA088 84 (v01 ALASKA A M I 01072009 AMI 00010013) [0.00] ACPI: FACP 0xDD6E8B78 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [0.00] ACPI: DSDT 0xDD6DA1A0 00E9D6
