Package: xserver-xfree86
Version: 4.3.0.dfsg.1-14sarge1
Severity: normal
xset dpms force off does nothing except blank the monitor
(it does not actually turn it off). Similarly, setting
timeouts does not cause the monitor to turn off after the
timeout but only blanks it.
When I boot into Knoppix or Morphix on the same hardware,
DPMS works as expected, so I am suspecting something's up
with the Debian package. If I should be doing something
differently then perhaps that needs to be documented somewhere.
-- Package-specific info:
Contents of /var/lib/xfree86/X.roster:
xserver-xfree86
/etc/X11/X target unchanged from checksum in /var/lib/xfree86/X.md5sum.
X server symlink status:
lrwxrwxrwx 1 root root 20 2006-01-05 23:44 /etc/X11/X - /usr/bin/X11/XFree86
-rwxr-xr-x 1 root root 1746444 2005-09-01 23:44 /usr/bin/X11/XFree86
Contents of /var/lib/xfree86/XF86Config-4.roster:
xserver-xfree86
VGA-compatible devices on PCI bus:
:00:0b.0 VGA compatible controller: Matrox Graphics, Inc. MGA 1064SG
[Mystique] (rev 02)
/var/lib/xfree86/XF86Config-4.md5sum does not exist.
XFree86 X server configuration file status:
-rw-rw-r-- 1 root root 5038 2006-05-24 15:53 /etc/X11/XF86Config-4
Contents of /etc/X11/XF86Config-4:
Section Files
FontPath
/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi
FontPath /usr/X11R6/lib/X11/fonts/TrueType
FontPath /usr/X11R6/lib/X11/fonts/kaname/
FontPath /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/
EndSection
Section Module
LoadGLcore
Loadbitmap
Loaddbe
Loadddc
Loaddri
Loadextmod
Loadfreetype
Loadglx
Loadint10
Loadpex5
Loadrecord
Loadspeedo
Loadtype1
Loadvbe
Loadxie
EndSection
Section InputDevice
Identifier Generic Keyboard
Driver keyboard
Option CoreKeyboard
Option XkbRules xfree86
Option XkbModel pc105
Option XkbLayout gb
EndSection
#Section InputDevice
# Identifier Configured Mouse
# Driver mouse
# Option CorePointer
## Option Device/dev/ttyS0
#Option Device/dev/mconv2-msemouse
#
## 2-button:
## Option Protocol Microsoft
## 3-button:
#Option Protocol MouseSystems
##Option ClearDTR # not for mconv2
#
# Option Emulate3Buttons true
# Option ZAxisMapping 4 5
#EndSection
Section InputDevice
Identifier Generic Mouse
Driver mouse
Option SendCoreEventstrue
# OptionDevice/dev/psaux # real PS/2
# NOTE! DO NOT use real PS/2 mouse with software suspend
# - it crashes on resume. see /etc/suspend.conf.
# Get a USB hub if you need the USB port back.
Option Device/dev/input/mouse0 # USB
# OptionDevice/dev/mconv2-ps2mouse
# OptionDevice/dev/gpmdata
Option Protocol ImPS/2
Option Emulate3Buttons true
Option ZAxisMapping 4 5
# SSB: added:
Option CorePointer
EndSection
Section Device
Identifier Matrox Mystique 2Mb
# Drivervesa
Driver mga
# BusID PCI:0:11:0
VideoRam2048
EndSection
Section Monitor
Identifier 15-inch TFT
HorizSync 27-110
Modeline [EMAIL PROTECTED] 64.56 1024 1056 1296 1328 768 783 791 807
Modeline [EMAIL PROTECTED] 24.11 640 672 760 792 480 490 495 505
Modeline [EMAIL PROTECTED] 30.76 512 544 600 632 384 392 396 404 doublescan
Modeline [EMAIL PROTECTED] 15.38 512 544 600 632 384 392 396 404
Modeline [EMAIL PROTECTED] 12.37 320 352 368 400 240 245 248 253 doublescan
Modeline [EMAIL PROTECTED] 6.19 320 352 368 400 240 245 248 253
Modeline [EMAIL PROTECTED] 8.13 256 288 296 328 192 196 198 202 doublescan
Modeline [EMAIL PROTECTED] 4.07 256 288 296 328 192 196 198 202
Modeline [EMAIL PROTECTED] 83.54 1152 1184 1496 1528 864 881 890 908
EndSection
Section Monitor
Identifier Iiyama VM at 85Hz
HorizSync 27-110
VertRefresh 50-160
# modelines created using http://xtiming.sourceforge.net/cgi-bin/xtiming.pl
# Modeline 1152x864 132.80 1152 1184 1688 1720 864 880 892 908 # 74Hz
# from prev:
Modeline 1152x864 137.65 1152 1184 1312 1536 864 866 885 902 -hsync
-vsync # 99 Hz
Modeline [EMAIL PROTECTED] 100.94 1024 1056 1432 1464 768 782 793 807
# Modeline
