Package: wodim
Version: 5:1.0~pre4-1.1
Severity: important
Thank you for wodim, I think this fork was the right thing to do, and
it's maybe an occasion to clean-up the interface (I'll appreciate a
gnu-options fashined interface) and get something more consistent with
a Linux/Debian environment. But actually I can't get it working!
I had the following problem:
I can burn the CD-RW, but than I get the following error when trying
to mount it:
mount: wrong fs type, bad option, bad superblock on /dev/hdc,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I tried different CD-RW, and also tried to launch wodim
with root permission with the same result.
Here it is the -v output from wodim:
This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any
way, don't refer to it as cdrecord. Send problem reports to
[EMAIL PROTECTED], don't bother Joerg Schilling with any
problems caused by this application.
Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
wodim: Operation not permitted. WARNING: Cannot set RR-scheduler
wodim: Permission denied. WARNING: Cannot set priority using setpriority().
wodim: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Warning: Cannot gain SYS_RAWIO capability: Operation not permitted
Possible reason: wodim not installed SUID root.
wodim: Warning: using inofficial version of libscg (debburn
project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright
1988,1995,2000-2004 J. Schilling').
wodim: Warning: using inofficial libscg transport code version
(cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86 05/11/22
Copyright 1997 J. Schilling').
SCSI buffer size: 64512
wodim: Warning: controller returns wrong page 3 for Ricoh Vendor Page page (30).
TOC Type: 1 = CD-ROM
Warning: This version of libscg has not been configured via the standard
autoconfiguration method of the Schily makefile system. There is a high risk
that the code is not configured correctly and for this reason will not behave
as expected.
atapi: 1
Device type: Removable CD-ROM
Version: 0
Response Format: 2
Capabilities :
Vendor_info: 'Slimtype'
Identifikation : 'DVDRW SOSW-852S '
Revision : 'PRS9'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x002B
Profile: 0x001B
Profile: 0x001A
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A (current)
Profile: 0x0009
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1422080 = 1388 KB
FIFO size : 4194304 = 4096 KB
wodim: Cannot get next writable address for 'invisible' track.
wodim: This means that we are checking recorded media.
wodim: This media cannot be written in streaming mode anymore.
wodim: If you like to write to 'preformatted' RW media, try to blank the media
first.
wodim: WARNING: Data may not fit on standard 74min disk.
wodim: Operation not permitted. WARNING: Cannot set RR-scheduler
wodim: Permission denied. WARNING: Cannot set priority using setpriority().
wodim: WARNING: This causes a high risk for buffer underruns.
Error: Cannot gain SYS_RAWIO capability, is wodim installed SUID root? Reason:
Operation not permitted
wodim: Warning: controller returns wrong page 3 for Ricoh Vendor Page page (30).
Track 01: data 652 MB
Total size: 749 MB (74:17.62) = 334322 sectors
Lout start: 750 MB (74:19/47) = 334322 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 6
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11625 (97:27/00)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 4 1T speed high: 10
2T speed low: 4 2T speed high: 0 (reserved val 6)
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D8
A2 values: 26 B2 4A
Disk type:Phase change
Manuf. index: 0
Manufacturer: Illegal Manufacturer code
Speed set to 1764 KB/s
Starting to write CD/DVD at speed 10.0 in real TAO mode for single session.
Last chance to quit, starting real write in 9 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Blanking PMA, TOC, pregap
Blanking time: 20.583s
wodim: Warning: controller returns wrong page 3 for Ricoh Vendor Page page (30).
BURN-Free is OFF.
Performing OPC...
Starting new track at sector: 0
Track 01: 652 of 652 MB written (fifo 100%) [buf 100%] 10.0x.
Track 01: Total bytes read/written: 684687360/684687360