Bug#419950: tulip eth driver init

2009-08-05 Thread Moritz Muehlenhoff 
On Sun, Nov 02, 2008 at 08:18:33PM -0400, Paul Medynski wrote:
 Hey Lou,
 
 I dropped a Realtek 8169 card into my box, and yanked the ADMtek, and I 
 haven't had any problems since.  I still see some interlacing between 
 eth0 and hd initialization, but it I'm not seeing any errors from the 
 r8169 driver.  Here's the modinfo from the tulip module I was using, and 
 the r8169 module I'm using now:
 
[..]
 
 I plan on putting the ADMtek card into another box shortly, so I'll let 
 you know what I see when I do that.

Have you been able to test this? Was the error caused by broken hardware?

Cheers,
Moritz



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org

Bug#419950: tulip eth driver init

2008-10-31 Thread Lou Poppler 

On Thu, 30 Oct 2008, Paul Medynski wrote:


Hi Lou,

I'm experiencing the same problem that you outlined in the email I found 
below.  I noticed that we have the same ADMtek ethernet card.  Here's my 
dmesg showing the ide and eth0 initialization intermingled:


[3.492758] Uniform Multi-Platform E-IDE driver
[3.492837] ide: Assuming 33MHz system bus speed for PIO modes; override 
with idebus=xx
[3.517233] VP_IDE: IDE controller (0x1106:0x0571 rev 0x10) at  PCI slot 
:00:07.1

[3.517352] VP_IDE: not 100% native mode: will probe irqs later
[3.517454] VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on 
pci:00:07.1

[3.517540] ide0: BM-DMA at 0xd000-0xd007
[3.517608] ide1: BM-DMA at 0xd008-0xd00f
[3.517669] Probing IDE interface ide0...
[3.685949] usbcore: registered new interface driver usbfs
[3.686096] usbcore: registered new interface driver hub
[3.686250] usbcore: registered new device driver usb
[3.707389] USB Universal Host Controller Interface driver v3.0
[3.892502] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[3.972184] hda: WDC WD2500JB-00REA0, ATA DISK drive
[4.032028] Marking TSC unstable due to: TSC halts in idle.
[4.255177] hdb: WDC WD3200AAJB-00WGA0, ATA DISK drive
[4.310938] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[4.311035] hda: UDMA/66 mode selected
[4.311167] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[4.311255] hdb: UDMA/66 mode selected
[4.311394] Probing IDE interface ide1...
[4.724888] hdc: WDC WD2500JB-00REA0, ATA DISK drive
[5.004149] hdd: WDC WD2000JB-00GVC0, ATA DISK drive
[5.060137] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[5.060225] hdc: UDMA/66 mode selected
[5.060356] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[5.061590] hdd: UDMA/66 mode selected
[5.062912] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[5.063060] ide1 at 0x170-0x177,0x376 on irq 15
[5.064740] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
[5.064811] PCI: setting IRQ 12 as level-triggered
[5.064821] ACPI: PCI Interrupt :00:07.2[D] - Link [LNKD] - GSI 12 
(level, low) - IRQ 12

[5.064992] uhci_hcd :00:07.2: UHCI Host Controller
[5.065287] uhci_hcd :00:07.2: new USB bus registered, assigned bus 
number 1

[5.065396] uhci_hcd :00:07.2: irq 12, io base 0xd400
[5.065708] usb usb1: configuration #1 chosen from 1 choice
[5.065859] hub 1-0:1.0: USB hub found
[5.065936] hub 1-0:1.0: 2 ports detected
[5.168344] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[5.168423] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1

[5.168496] usb usb1: Product: UHCI Host Controller
[5.168557] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[5.168620] usb usb1: SerialNumber: :00:07.2
[5.168876] ACPI: PCI Interrupt :00:07.3[D] - Link [LNKD] - GSI 12 
(level, low) - IRQ 12

[5.169052] uhci_hcd :00:07.3: UHCI Host Controller
[5.169178] uhci_hcd :00:07.3: new USB bus registered, assigned bus 
number 2

[5.169286] uhci_hcd :00:07.3: irq 12, io base 0xd800
[5.169594] usb usb2: configuration #1 chosen from 1 choice
[5.169735] hub 2-0:1.0: USB hub found
[5.169812] hub 2-0:1.0: 2 ports detected
[5.176864] No dock devices found.
[5.215964] SCSI subsystem initialized
[5.261595] libata version 3.00 loaded.
[5.272409] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[5.272492] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1

[5.272566] usb usb2: Product: UHCI Host Controller
[5.272625] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[5.272688] usb usb2: SerialNumber: :00:07.3
[5.274802] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[5.274879] PCI: setting IRQ 11 as level-triggered
[5.274889] ACPI: PCI Interrupt :00:0a.0[A] - Link [LNKC] - GSI 11 
(level, low) - IRQ 11
[5.275399] tulip0:  MII transceiver #1 config 1000 status 7869 
advertising 05e1.
[5.279455] eth0: ADMtek Comet rev 17 at Port 0xe800, 00:04:5a:7c:4e:05, 
IRQ 11.

[5.383698] hda: max request size: 512KiB
[5.399933] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, 
CHS=30401/255/63

[5.400233] hda: cache flushes supported
[5.400416]  hda: hda1 hda2 hda3
[5.409031] hdb: max request size: 512KiB
[5.427436] hdb: 625142448 sectors (320072 MB) w/8192KiB Cache, 
CHS=38913/255/63

[5.431315] hdb: cache flushes supported
[5.431490]  hdb: hdb1
[5.445991] hdc: max request size: 512KiB
[5.461190] hdc: 488397168 sectors (250059 MB) w/8192KiB Cache, 
CHS=30401/255/63

[5.461458] hdc: cache flushes supported
[5.461649]  hdc: hdc1 hdc2 hdc3
[5.470501] hdd: max request size: 512KiB
[5.488660] hdd: 390721968 sectors (200049 MB) w/8192KiB Cache, 
CHS=24321/255/63

[5.490855] hdd: