Bug#565812: The build wl.ko dont works with a bcm4312 card. With the broadcom-sta-common_5.10.91.9.3-2_all - Version it works fine
re-. - I did not rebuild the initrd-File. I used the module-assistant to build the Kernelmodule, and it works without errors. With a fresh install of -3, you must. Previously ssb and b43 modules were unloaded just before loading wl. Now modules are blacklisted via /etc/modprobe.d/broadcom-sta-common.conf and wl module is loaded. - I attatched 2 dmesg-outputs, one with working old module and one with the new. Hope that can help... Yes, I think : - I can see that ssb module was loaded at boot time: ssb: Sonics Silicon Backplane found on PCI device :08:00.0 - It seems that there is a problem with module's license : wl: module license 'unspecified' taints kernel. but it should be: wl: module license 'MIXED/Proprietary' taints kernel. Could you please: - remove /usr/src/modules/broadcom-sta directory - rebuild and install the module with m-a - check that /etc/modprobe.d/broadcom-sta-common.conf is the new one[1] - rebuild the initrd file to prevent modules from being loaded at boot time - reboot [1] : # wl module from Broadcom conflicts with ssb # We must blacklist the following modules: blacklist b44 blacklist b43legacy blacklist b43 blacklist ssb install wl /sbin/modprobe --ignore-install wl $CMDLINE_OPTS Regards, -- Cyril Lacoux -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#565812: The build wl.ko dont works with a bcm4312 card. With the broadcom-sta-common_5.10.91.9.3-2_all - Version it works fine
Package: broadcom-sta Version: broadcom-sta-common_5.10.91.9.3-3_all Severity: grave Justification: renders package unusable The build wl-module dont works with a bcm4312 card. The interface is not found. The problem exists since upgrading from broadcom-sta-common_5.10.91.9.3-2_all to broadcom-sta-common_5.10.91.9.3-2_all. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-3.slh.3-sidux-amd64 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#565812: The build wl.ko dont works with a bcm4312 card. With the broadcom-sta-common_5.10.91.9.3-2_all - Version it works fine
Le mardi 19 janvier 2010 02:35:01, vous avez écrit : Package: broadcom-sta Version: broadcom-sta-common_5.10.91.9.3-3_all Severity: grave Justification: renders package unusable Hi, Could you please provide more information about the problem: - Did you rebuild the initrd file as mentionned in README.Debian - Are the b43 and ssb modules loaded ? - Is the wl module loaded ? - dmesg output Regards, -- Cyril Lacoux. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
