Package: linux-2.6
Version: 2.6.32-39
Severity: normal

Kernel bug happend when disconnecting USB device (MP3 player with 2 internal 
flash cards)

-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-39) (da...@debian.org) (gcc version 
4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Nov 3 03:41:26 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 
root=UUID=50233c57-5144-4fe1-8aa4-9fcad3fc9e34 ro

** Tainted: D (128)
 * Kernel has oopsed before.

** Kernel log:
[73492.621720] scsi12 : SCSI emulation for USB Mass Storage devices
[73492.621867] usb-storage: device found at 3
[73492.621869] usb-storage: waiting for device to settle before scanning
[73497.620084] usb-storage: device scan complete
[73497.620447] scsi 12:0:0:0: Direct-Access     MEDION   MD 82377         1.14 
PQ: 0 ANSI: 0
[73497.621450] sd 12:0:0:0: Attached scsi generic sg5 type 0
[73497.622949] sd 12:0:0:0: [sdd] 7942144 512-byte logical blocks: (4.06 
GB/3.78 GiB)
[73497.623796] sd 12:0:0:0: [sdd] Write Protect is off
[73497.623799] sd 12:0:0:0: [sdd] Mode Sense: 03 00 00 00
[73497.623801] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[73497.626016] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[73497.626020]  sdd:
[73497.628431] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[73497.628434] sd 12:0:0:0: [sdd] Attached SCSI removable disk
[73498.320720] FAT: utf8 is not a recommended IO charset for FAT filesystems, 
filesystem will be case sensitive!
[74021.900067] FAT: utf8 is not a recommended IO charset for FAT filesystems, 
filesystem will be case sensitive!
[74025.614338] usb 1-2: USB disconnect, address 3
[81186.604513] usb 3-2: new full speed USB device using uhci_hcd and address 6
[81188.151917] usb 3-2: New USB device found, idVendor=066f, idProduct=821c
[81188.151921] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[81188.151924] usb 3-2: Product: MP3 Player       
[81188.151926] usb 3-2: Manufacturer: Generic  
[81188.151928] usb 3-2: SerialNumber: F03A06B6764C0688
[81188.152030] usb 3-2: configuration #1 chosen from 1 choice
[81188.159989] scsi13 : SCSI emulation for USB Mass Storage devices
[81188.160126] usb-storage: device found at 6
[81188.160128] usb-storage: waiting for device to settle before scanning
[81193.161639] usb-storage: device scan complete
[81193.164629] scsi 13:0:0:0: Direct-Access     Generic  MP3 Player       0100 
PQ: 0 ANSI: 4
[81193.167625] scsi 13:0:0:1: Direct-Access     Generic  MP3 Player       0100 
PQ: 0 ANSI: 4
[81193.168201] sd 13:0:0:0: Attached scsi generic sg5 type 0
[81193.168339] sd 13:0:0:1: Attached scsi generic sg6 type 0
[81193.178615] sd 13:0:0:0: [sdd] 993920 2048-byte logical blocks: (2.03 
GB/1.89 GiB)
[81193.183611] sd 13:0:0:0: [sdd] Write Protect is off
[81193.183614] sd 13:0:0:0: [sdd] Mode Sense: 3e 00 00 00
[81193.183617] sd 13:0:0:0: [sdd] Assuming drive cache: write through
[81193.186612] sd 13:0:0:1: [sde] 3862528 512-byte logical blocks: (1.97 
GB/1.84 GiB)
[81193.191611] sd 13:0:0:1: [sde] Write Protect is off
[81193.191614] sd 13:0:0:1: [sde] Mode Sense: 3e 00 00 00
[81193.191616] sd 13:0:0:1: [sde] Assuming drive cache: write through
[81193.202611] sd 13:0:0:0: [sdd] 993920 2048-byte logical blocks: (2.03 
GB/1.89 GiB)
[81193.207609] sd 13:0:0:0: [sdd] Assuming drive cache: write through
[81193.207612]  sdd: sdd1
[81193.219608] sd 13:0:0:1: [sde] Assuming drive cache: write through
[81193.219612]  sde:
[81193.238680] sd 13:0:0:0: [sdd] 993920 2048-byte logical blocks: (2.03 
GB/1.89 GiB)
[81193.243608] sd 13:0:0:0: [sdd] Assuming drive cache: write through
[81193.243612] sd 13:0:0:0: [sdd] Attached SCSI removable disk
[81193.251606] sd 13:0:0:1: [sde] Assuming drive cache: write through
[81193.251610] sd 13:0:0:1: [sde] Attached SCSI removable disk
[81195.003510] FAT: utf8 is not a recommended IO charset for FAT filesystems, 
filesystem will be case sensitive!
[81195.011496] FAT: Invalid FSINFO signature: 0x00000000, 0x00000000 (sector = 
1)
[81195.133509] FAT: utf8 is not a recommended IO charset for FAT filesystems, 
filesystem will be case sensitive!
[81197.804514] FAT: Invalid FSINFO signature: 0x00000000, 0x00000000 (sector = 
1)
[81273.022290] BUG: unable to handle kernel paging request at 0000100000000000
[81273.022295] IP: [<0000100000000000>] 0x100000000000
[81273.022303] PGD 0 
[81273.022305] Oops: 0010 [#1] SMP 
[81273.022308] last sysfs file: 
/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/host13/target13:0:0/13:0:0:1/block/sde/uevent
[81273.022312] CPU 0 
[81273.022313] Modules linked in: nls_utf8 nls_cp437 usb_storage btrfs 
zlib_deflate crc32c libcrc32c ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat 
jfs xfs exportfs reiserfs nfs lockd fscache nfs_acl auth_rpcgss sunrpc 
acpi_cpufreq cpufreq_userspace cpufreq_stats cpufreq_conservative 
cpufreq_powersave ppdev lp binfmt_misc fuse ext3 jbd ext2 loop 
snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq 
snd_timer i915 snd_seq_device drm_kms_helper ata_generic snd drm soundcore 
i2c_algo_bit sg video uhci_hcd sr_mod r8169 sym53c8xx i2c_i801 evdev output 
ehci_hcd scsi_transport_spi i2c_core snd_page_alloc parport_serial usbcore 
nls_base cdrom processor mii pata_jmicron psmouse floppy pcspkr parport_pc 
serio_raw parport button ext4 mbcache jbd2 crc16 sd_mod crc_t10dif ahci libata 
thermal scsi_mod thermal_sys
[81273.022375] Pid: 18056, comm: umount Not tainted 2.6.32-5-amd64 #1 G33-DS3R
[81273.022377] RIP: 0010:[<0000100000000000>]  [<0000100000000000>] 
0x100000000000
[81273.022382] RSP: 0018:ffff8801071f1c90  EFLAGS: 00010006
[81273.022385] RAX: 0000100000000000 RBX: ffff880059bcd110 RCX: 00000000000034c1
[81273.022387] RDX: ffff88001d643e00 RSI: ffff880059bcd110 RDI: ffff880059bcd110
[81273.022390] RBP: 000000000109ac40 R08: ffff88012d036a38 R09: 00000000ffffffff
[81273.022393] R10: 0000000000000001 R11: 0000100000000000 R12: ffff88012d12e9c0
[81273.022395] R13: 0000000000000292 R14: 0000000000000000 R15: ffff88001d544f00
[81273.022398] FS:  00007f11da6e8740(0000) GS:ffff880005400000(0000) 
knlGS:0000000000000000
[81273.022401] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[81273.022403] CR2: 0000100000000000 CR3: 000000012aa4e000 CR4: 00000000000006f0
[81273.022406] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[81273.022409] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[81273.022411] Process umount (pid: 18056, threadinfo ffff8801071f0000, task 
ffff880125469530)
[81273.022413] Stack:
[81273.022415]  ffffffff8117e4d7 ffff88012d12e9c0 0000000000000000 
ffff880059bcd110
[81273.022419] <0> ffffffff8117ea92 ffff880059bcd110 000000000109a000 
ffff8801071f1df8
[81273.022423] <0> ffffffffa0010357 0000000000000000 ffffffffa00103a8 
0000000000000000
[81273.022427] Call Trace:
[81273.022434]  [<ffffffff8117e4d7>] ? __blk_put_request+0x7b/0xb0
[81273.022437]  [<ffffffff8117ea92>] ? blk_put_request+0x26/0x3a
[81273.022446]  [<ffffffffa0010357>] ? scsi_execute+0x11e/0x12f [scsi_mod]
[81273.022454]  [<ffffffffa00103a8>] ? scsi_execute_req+0x40/0xb9 [scsi_mod]
[81273.022461]  [<ffffffffa00103ef>] ? scsi_execute_req+0x87/0xb9 [scsi_mod]
[81273.022469]  [<ffffffffa000ad20>] ? ioctl_internal_command+0x64/0x16a 
[scsi_mod]
[81273.022476]  [<ffffffffa000ae80>] ? scsi_set_medium_removal+0x5a/0x98 
[scsi_mod]
[81273.022482]  [<ffffffffa002ebe9>] ? sd_release+0xaf/0xc2 [sd_mod]
[81273.022487]  [<ffffffff8111285a>] ? __blkdev_put+0x94/0x14c
[81273.022491]  [<ffffffff81112903>] ? __blkdev_put+0x13d/0x14c
[81273.022495]  [<ffffffff810f144d>] ? deactivate_super+0x60/0x77
[81273.022499]  [<ffffffff81103dc0>] ? sys_umount+0x2dc/0x30b
[81273.022503]  [<ffffffff812febf6>] ? do_page_fault+0x2e0/0x2fc
[81273.022508]  [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[81273.022510] Code:  Bad RIP value.
[81273.022512] RIP  [<0000100000000000>] 0x100000000000
[81273.022516]  RSP <ffff8801071f1c90>
[81273.022518] CR2: 0000100000000000
[81273.022520] ---[ end trace 0a95315fe6dfab8e ]---
[81277.840338] usb 3-2: USB disconnect, address 6

** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: G33-DS3R
product_version:  
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:  
bios_vendor: Award Software International, Inc.
bios_version: F6
board_vendor: Gigabyte Technology Co., Ltd.
board_name: G33-DS3R
board_version: x.x

** Loaded modules:
Module                  Size  Used by
nls_utf8                1208  0 
nls_cp437               5817  0 
usb_storage            40057  1 
btrfs                 375821  0 
zlib_deflate           17746  1 btrfs
crc32c                  2560  1 
libcrc32c               1074  1 btrfs
ufs                    56474  0 
qnx4                    6194  0 
hfsplus                65270  0 
hfs                    37455  0 
minix                  21197  0 
ntfs                  162812  0 
vfat                    7884  1 
msdos                   6202  0 
fat                    40038  2 vfat,msdos
jfs                   140105  0 
xfs                   435449  0 
exportfs                3170  1 xfs
reiserfs              194156  0 
nfs                   241226  2 
lockd                  57619  1 nfs
fscache                29834  1 nfs
nfs_acl                 2031  1 nfs
auth_rpcgss            33508  1 nfs
sunrpc                161589  11 nfs,lockd,nfs_acl,auth_rpcgss
acpi_cpufreq            5571  0 
cpufreq_userspace       1992  0 
cpufreq_stats           2740  0 
cpufreq_conservative     5162  0 
cpufreq_powersave        902  0 
ppdev                   5030  0 
lp                      7462  0 
binfmt_misc             6431  1 
fuse                   50924  1 
ext3                  106710  3 
jbd                    37221  1 ext3
ext2                   52905  1 
loop                   11799  0 
snd_hda_codec_realtek   235618  1 
snd_hda_intel          20035  1 
snd_hda_codec          54244  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5380  1 snd_hda_codec
snd_pcm                60487  2 snd_hda_intel,snd_hda_codec
snd_seq                42881  0 
snd_timer              15598  2 snd_pcm,snd_seq
i915                  256094  2 
snd_seq_device          4493  1 snd_seq
drm_kms_helper         20369  1 i915
ata_generic             3239  0 
snd                    46526  10 
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
drm                   142279  3 i915,drm_kms_helper
soundcore               4598  1 snd
i2c_algo_bit            4225  1 i915
sg                     24069  0 
video                  17445  1 i915
uhci_hcd               18521  0 
sr_mod                 12602  0 
r8169                  36840  0 
sym53c8xx              64216  0 
i2c_i801                7830  0 
evdev                   7352  8 
output                  1692  1 video
ehci_hcd               32081  0 
scsi_transport_spi     18774  1 sym53c8xx
i2c_core               15819  5 i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
snd_page_alloc          6249  2 snd_hda_intel,snd_pcm
parport_serial          4449  0 
usbcore               122674  4 usb_storage,uhci_hcd,ehci_hcd
nls_base                6377  9 
nls_utf8,nls_cp437,hfsplus,hfs,ntfs,vfat,fat,jfs,usbcore
cdrom                  29415  1 sr_mod
processor              29935  1 acpi_cpufreq
mii                     3210  1 r8169
pata_jmicron            2280  0 
psmouse                49937  0 
floppy                 49087  0 
pcspkr                  1699  0 
parport_pc             18855  3 parport_serial
serio_raw               3752  0 
parport                27954  3 ppdev,lp,parport_pc
button                  4650  1 i915
ext4                  288350  2 
mbcache                 5050  3 ext3,ext2,ext4
jbd2                   67015  1 ext4
crc16                   1319  1 ext4
sd_mod                 29921  11 
crc_t10dif              1276  1 sd_mod
ahci                   32534  7 
libata                133776  3 ata_generic,pata_jmicron,ahci
thermal                11674  0 
scsi_mod              126533  7 
usb_storage,sg,sr_mod,sym53c8xx,scsi_transport_spi,sd_mod,libata
thermal_sys            11942  3 video,processor,thermal

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet static
        address 192.168.0.1
        netmask 255.255.255.0
        network 192.168.0.0
        broadcast 192.168.0.255
        gateway 192.168.0.254
        # dns-* options are implemented by the resolvconf package, if installed
        dns-nameservers 192.168.0.254
#       dns-search somewhere.de

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP 
qlen 1000
    link/ether 00:1d:7d:08:f7:5d brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.1/24 brd 192.168.0.255 scope global eth0
    inet6 fe80::21d:7dff:fe08:f75d/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    
packets errs drop fifo colls carrier compressed
    lo:   17834     229    0    0    0     0          0         0    17834     
229    0    0    0     0       0          0
  eth0:294674251  282273    0    0    0     0          0         0 71644425  
201597    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    247645 total packets received
    230 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    247415 incoming packets delivered
    201482 requests sent out
Icmp:
    5 ICMP messages received
    2 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 5
    5 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 5
IcmpMsg:
        InType3: 5
        OutType3: 5
Tcp:
    4690 active connections openings
    20 passive connection openings
    44 failed connection attempts
    263 connection resets received
    2 connections established
    239868 segments received
    194686 segments send out
    341 segments retransmited
    0 bad segments received.
    489 resets sent
Udp:
    6076 packets received
    0 packets to unknown port received.
    0 packet receive errors
    5338 packets sent
UdpLite:
TcpExt:
    1325 TCP sockets finished time wait in fast timer
    1 time wait sockets recycled by time stamp
    1788 delayed acks sent
    Quick ack mode was activated 15 times
    166 packets directly queued to recvmsg prequeue.
    94 bytes directly in process context from backlog
    205970 bytes directly received in process context from prequeue
    190456 packet headers predicted
    145 packets header predicted and directly queued to user
    9224 acknowledgments not containing data payload received
    33196 predicted acknowledgments
    39 congestion windows recovered without slow start after partial ack
    115 other TCP timeouts
    15 DSACKs sent for old packets
    26 DSACKs received
    85 connections reset due to unexpected data
    245 connections reset due to early user close
    45 connections aborted due to timeout
    TCPDSACKIgnoredOld: 2
    TCPDSACKIgnoredNoUndo: 8
IpExt:
    InMcastPkts: 2674
    OutMcastPkts: 1925
    InBcastPkts: 354
    OutBcastPkts: 9
    InOctets: 289166836
    OutOctets: 68818199
    InMcastOctets: 233005
    OutMcastOctets: 135081
    InBcastOctets: 60141
    OutBcastOctets: 702


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM 
Controller [8086:29c0] (rev 02)
        Subsystem: Giga-byte Technology Device [1458:5000]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express 
Integrated Graphics Controller [8086:29c2] (rev 02) (prog-if 00 [VGA 
controller])
        Subsystem: Giga-byte Technology Device [1458:d000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 29
        Region 0: Memory at f2300000 (32-bit, non-prefetchable) [size=512K]
        Region 1: I/O ports at e100 [size=8]
        Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Region 3: Memory at f2100000 (32-bit, non-prefetchable) [size=1M]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Giga-byte Technology Device [1458:5004]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at e200 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Giga-byte Technology Device [1458:5004]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 21
        Region 4: I/O ports at e600 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Giga-byte Technology Device [1458:5004]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at e000 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI 
Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
        Subsystem: Giga-byte Technology Device [1458:5006]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f2385000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio 
Controller [8086:293e] (rev 02)
        Subsystem: Giga-byte Technology Device [1458:a002]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at f2380000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express 
Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: f2400000-f25fffff
        Prefetchable memory behind bridge: 00000000f2600000-00000000f27fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express 
Port 4 [8086:2946] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: f2000000-f20fffff
        Prefetchable memory behind bridge: 00000000f2800000-00000000f29fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express 
Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: f0000000-f1ffffff
        Prefetchable memory behind bridge: 00000000f2a00000-00000000f2bfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Giga-byte Technology Device [1458:5004]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 4: I/O ports at e300 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Giga-byte Technology Device [1458:5004]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at e400 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI 
Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Giga-byte Technology Device [1458:5004]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at e500 [size=32]
        Capabilities: <access denied>
        Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI 
Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
        Subsystem: Giga-byte Technology Device [1458:5006]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at f2384000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
92) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: f2200000-f22fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface 
Controller [8086:2916] (rev 02)
        Subsystem: Giga-byte Technology Device [1458:5001]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 
port SATA AHCI Controller [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
        Subsystem: Giga-byte Technology Device [1458:b005]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 27
        Region 0: I/O ports at e700 [size=8]
        Region 1: I/O ports at e800 [size=4]
        Region 2: I/O ports at e900 [size=8]
        Region 3: I/O ports at ea00 [size=4]
        Region 4: I/O ports at eb00 [size=32]
        Region 5: Memory at f2386000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller 
[8086:2930] (rev 02)
        Subsystem: Giga-byte Technology Device [1458:5001]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at f2387000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 0500 [size=32]
        Kernel driver in use: i801_smbus

02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial 
ATA Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 19
        Region 5: Memory at f2000000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA 
Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:b000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 16
        Region 0: I/O ports at b000 [size=8]
        Region 1: I/O ports at b100 [size=4]
        Region 2: I/O ports at b200 [size=8]
        Region 3: I/O ports at b300 [size=4]
        Region 4: I/O ports at b400 [size=16]
        Capabilities: <access denied>
        Kernel driver in use: pata_jmicron

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 28
        Region 0: I/O ports at c000 [size=256]
        Region 2: Memory at f1000000 (64-bit, non-prefetchable) [size=4K]
        [virtual] Expansion ROM at f2a00000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: r8169

04:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c810 
[1000:0001] (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32
        Interrupt: pin A routed to IRQ 20
        Region 0: I/O ports at d000 [size=256]
        Region 1: Memory at f2200000 (32-bit, non-prefetchable) [size=256]
        Kernel driver in use: sym53c8xx

04:02.0 Communication controller [0780]: NetMos Technology PCI 9835 Multi-I/O 
Controller [9710:9835] (rev 01)
        Subsystem: LSI Logic / Symbios Logic 1P2S [1000:0012]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at d100 [size=8]
        Region 1: I/O ports at d200 [size=8]
        Region 2: I/O ports at d300 [size=8]
        Region 3: I/O ports at d400 [size=8]
        Region 4: I/O ports at d500 [size=8]
        Region 5: I/O ports at d600 [size=16]
        Kernel driver in use: parport_serial


** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.3
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii  debconf [debconf-2.0]         1.5.36.1   Debian configuration management sy
ii  initramfs-tools [linux-initra 0.98.8     tools for generating an initramfs
ii  linux-base                    2.6.32-39  Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn  firmware-linux-free           <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
  linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
  linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Reply via email to