Bug#914813: Additional informations

2020-08-24 Thread Bernhard 
Hello Vagrant

Here, there are additional informations. Hopefully they helps a little bit:

I installed Debian 10 on a Lamobo R1 (Allwinner A20 / Banana Router R1).
Here, you see, the AXP20x module is loaded during booting the installer:

> Jan  1 00:00:18 kernel: [7.986527] usbcore: registered new interface 
> driver hub
> Jan  1 00:00:18 kernel: [7.995497] axp20x-i2c 0-0034: AXP20x variant 
> AXP209 found
> Jan  1 00:00:18 kernel: [7.997875] usbcore: registered new device driver 
> usb
> Jan  1 00:00:18 kernel: [8.025743] ehci_hcd: USB 2.0 'Enhanced' Host 
> Controller (EHCI) Driver
> Jan  1 00:00:18 kernel: [8.069899] axp20x-i2c 0-0034: AXP20X driver loaded
> Jan  1 00:00:18 kernel: [8.073223] ehci-platform: EHCI generic platform 
> driver
> Jan  1 00:00:18 kernel: [8.078346] ohci_hcd: USB 1.1 'Open' Host 
> Controller (OHCI) Driver
> Jan  1 00:00:18 kernel: [8.109688] ohci-platform: OHCI generic platform 
> driver
> Jan  1 00:00:18 kernel: [8.134562] sun7i-dwmac 1c5.ethernet: PTP uses 
> main clock
> Jan  1 00:00:18 kernel: [8.146085] sun7i-dwmac 1c5.ethernet: no reset 
> control found
> Jan  1 00:00:18 kernel: [8.165454] sun7i-dwmac 1c5.ethernet: Linked 
> as a consumer to regulator.7
> Jan  1 00:00:18 kernel: [8.264393] ldo1: supplied by regulator-dummy
> Jan  1 00:00:18 kernel: [8.273261] ldo2: supplied by regulator-dummy
> Jan  1 00:00:18 kernel: [8.280630] ldo3: supplied by regulator-dummy
> Jan  1 00:00:18 kernel: [8.284028] axp20x-usb-power-supply 
> axp20x-usb-power-supply: DMA mask not set
> Jan  1 00:00:18 kernel: [8.294055] sun7i-dwmac 1c5.ethernet: Version 
> ID not available

The beginning of the syslog from /var/log/installer is attached.

Best regards
Bernhard

Jan  1 00:00:18 syslogd started: BusyBox v1.30.1
Jan  1 00:00:18 kernel: klogd started: BusyBox v1.30.1 (Debian 1:1.30.1-4)
Jan  1 00:00:18 kernel: [0.00] Booting Linux on physical CPU 0x0
Jan  1 00:00:18 kernel: [0.00] Linux version 4.19.0-10-armmp 
(debian-ker...@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP 
Debian 4.19.132-1 (2020-07-24)
Jan  1 00:00:18 kernel: [0.00] CPU: ARMv7 Processor [410fc074] revision 
4 (ARMv7), cr=10c5387d
Jan  1 00:00:18 kernel: [0.00] CPU: div instructions available: 
patching division code
Jan  1 00:00:18 kernel: [0.00] CPU: PIPT / VIPT nonaliasing data cache, 
VIPT aliasing instruction cache
Jan  1 00:00:18 kernel: [0.00] OF: fdt: Machine model: Lamobo R1
Jan  1 00:00:18 kernel: [0.00] Memory policy: Data cache writealloc
Jan  1 00:00:18 kernel: [0.00] efi: Getting EFI parameters from FDT:
Jan  1 00:00:18 kernel: [0.00] efi: UEFI not found.
Jan  1 00:00:18 kernel: [0.00] cma: Reserved 16 MiB at 0x7f00
Jan  1 00:00:18 kernel: [0.00] On node 0 totalpages: 262144
Jan  1 00:00:18 kernel: [0.00]   Normal zone: 1728 pages used for memmap
Jan  1 00:00:18 kernel: [0.00]   Normal zone: 0 pages reserved
Jan  1 00:00:18 kernel: [0.00]   Normal zone: 196608 pages, LIFO 
batch:63
Jan  1 00:00:18 kernel: [0.00]   HighMem zone: 65536 pages, LIFO 
batch:15
Jan  1 00:00:18 kernel: [0.00] psci: probing for conduit method from DT.
Jan  1 00:00:18 kernel: [0.00] psci: Using PSCI v0.1 Function IDs from 
DT
Jan  1 00:00:18 kernel: [0.00] random: get_random_bytes called from 
start_kernel+0xa0/0x508 with crng_init=0
Jan  1 00:00:18 kernel: [0.00] percpu: Embedded 17 pages/cpu s39756 
r8192 d21684 u69632
Jan  1 00:00:18 kernel: [0.00] pcpu-alloc: s39756 r8192 d21684 u69632 
alloc=17*4096
Jan  1 00:00:18 kernel: [0.00] pcpu-alloc: [0] 0 [0] 1 
Jan  1 00:00:18 kernel: [0.00] Built 1 zonelists, mobility grouping on. 
 Total pages: 260416
Jan  1 00:00:18 kernel: [0.00] Kernel command line:  
console=ttyS0,115200
Jan  1 00:00:18 kernel: [0.00] Dentry cache hash table entries: 131072 
(order: 7, 524288 bytes)
Jan  1 00:00:18 kernel: [0.00] Inode-cache hash table entries: 65536 
(order: 6, 262144 bytes)
Jan  1 00:00:18 kernel: [0.00] Memory: 982316K/1048576K available 
(9216K kernel code, 1112K rwdata, 2588K rodata, 2048K init, 311K bss, 49876K 
reserved, 16384K cma-reserved, 245760K highmem)
Jan  1 00:00:18 kernel: [0.00] Virtual kernel memory layout:
Jan  1 00:00:18 kernel: [0.00] vector  : 0x - 0x1000   
(   4 kB)
Jan  1 00:00:18 kernel: [0.00] fixmap  : 0xffc0 - 0xfff0   
(3072 kB)
Jan  1 00:00:18 kernel: [0.00] vmalloc : 0xf080 - 0xff80   
( 240 MB)
Jan  1 00:00:18 kernel: [0.00] lowmem  : 0xc000 - 0xf000   
( 768 MB)
Jan  1 00:00:18 kernel: [0.00] pkmap   : 0xbfe0 - 0xc000   
(   2 MB)
Jan  1 00:00:18 kernel: [0.00] modules : 0xbf00 - 0xbfe0   
(  14 MB)
Jan  1 00:00:18 kernel: [

Bug#914813: Additional informations

2020-05-15 Thread Bernhard 
Hello Vagrant

After my test with Armbian at Bananapi M3, i have an idea what happens.
Is it possible, that the axp20x module is missing in the installer kernel?

In Armbian-Syslog, i found the entry:
https://bugs.debian.org/cgi-bin/bugreport.cgi?att=1;bug=914813;filename=syslog-armbian_20.02.1_Bananapim3_buster.log;msg=100
> Feb 17 09:43:16 localhost kernel: [2.928297] axp20x-rsb sunxi-rsb-3a3: 
> AXP20x variant AXP813 found

In the latest Debian installer syslog, such kind of entry is missing:
https://bugs.debian.org/cgi-bin/bugreport.cgi?att=1;bug=914813;filename=uboot-2020.04.rc5.log;msg=95

Thank you for support.

Bernhard



signature.asc
Description: This is a digitally signed message part

Bug#914813: Additional informations

2018-12-26 Thread Bernhard 
Hello Geert

Thank you for the fast response.
Yes, you're right: i forgot to write additional informations.

Here, the additional informations:

> That a bootloader like  uboot does see the network hardware
U-Boot don't see the ethernet interface:
> U-Boot SPL 2018.11+dfsg-2 (Dec 09 2018 - 07:16:44 +)
> DRAM: 2048 MiB
> Trying to boot from MMC1
> 
> 
> U-Boot 2018.11+dfsg-2 (Dec 09 2018 - 07:16:44 +) Allwinner Technology
> 
> CPU:   Allwinner A83T (SUN8I 1673)
> Model: Banana Pi BPI-M3
> DRAM:  2 GiB
> MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
> Loading Environment from FAT... Unable to use mmc 1:0... In:serial
> Out:   serial
> Err:   serial
> Net:   No ethernet found.
> starting USB...
> USB0:   No host cable detected: Port not available.
> USB1:   USB EHCI 1.00
> scanning bus 0 for devices... 1 USB Device(s) found
>scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot:  0 
> 

> Boot messages from the kernel
In kernel, there are no specific messages regarding the Realtek ethernet.
These are the messages, specific to the ethernet:
> ~ # dmesg | grep "eth"
> [7.318879] dwmac-sun8i 1c3.ethernet: PTP uses main clock
> [7.433860] dwmac-sun8i 1c3.ethernet: PTP uses main clock
> [7.449695] dwmac-sun8i 1c3.ethernet: PTP uses main clock
> [7.930216] dwmac-sun8i 1c3.ethernet: PTP uses main clock
> [8.532710] dwmac-sun8i 1c3.ethernet: PTP uses main clock
> 

If you need further informations, please let me know.

Thank you for the great support
Bernhard



signature.asc
Description: This is a digitally signed message part