Bug#1050896: Packagesearch Copyright Statement
Hi Enrico, hi Frannoe, you have both contributed to packagesearch in the past (Frannoe contributed the Spanish Translation, Enrico quite some code changes). Bug #1050896 now states that I should clarify copyright: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1050896 I would like to switch to GPL3+ and would like your approval for this license switch. I would ask you to CC 1050...@bugs.debian.org if you are comfortable with this change. I have BCCed you, to protect your E-Mail Address in case you want it to remain private. Please not that CCing 1050...@bugs.debian.org will record your response and mail-address permanently by the BTS and make it accessible to the internet. Regards Ben signature.asc Description: This is a digitally signed message part
Bug#1009987: bluez: Bluetooth service does not start
Package: bluez Version: 5.64-1 Severity: grave Justification: renders package unusable Hi, I installed testing non-free and immediately upgraded to unstable on a lenovo thinkbook in the last two day. After that bluetooth was not working. Note, that I did not test bluetooth while still being on testing. After many attempts to get latest firmware I eventually figured out the root cause: the bluetooth.service was not starting due to a missing /var/lib/bluetooth directory. Output for service status: × bluetooth.service - Bluetooth service Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Thu 2022-04-21 19:56:46 CEST; 12min ago Docs: man:bluetoothd(8) Process: 2411 ExecStart=/usr/libexec/bluetooth/bluetoothd (code=exited, status=226/NAMESPACE) Main PID: 2411 (code=exited, status=226/NAMESPACE) CPU: 4ms Apr 21 19:56:46 lenovo-ben systemd[1]: Starting Bluetooth service... Apr 21 19:56:46 lenovo-ben systemd[2411]: bluetooth.service: Failed to set up mount namespacing: /run/systemd/unit-root/var/lib/bluetooth: No such file or directory Apr 21 19:56:46 lenovo-ben systemd[2411]: bluetooth.service: Failed at step NAMESPACE spawning /usr/libexec/bluetooth/bluetoothd: No such file or directory Apr 21 19:56:46 lenovo-ben systemd[1]: bluetooth.service: Main process exited, code=exited, status=226/NAMESPACE Apr 21 19:56:46 lenovo-ben systemd[1]: bluetooth.service: Failed with result 'exit-code'. Calling install -m 700 -d /var/lib/bluetooth and restarting bluetooth service eventually fixed the issue. It cost me a couple of hours to find the solution, for a less tech-savy user bluetooth will be not usable. Therefore I set severity to grave. Regards Ben -- System Information: Debian Release: bookworm/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 5.17.0-1-amd64 (SMP w/16 CPU threads; PREEMPT) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages bluez depends on: ii dbus [default-dbus-system-bus] 1.14.0-1 ii init-system-helpers 1.62 ii kmod29-1 ii libasound2 1.2.6.1-2+b1 ii libc6 2.33-7 ii libdbus-1-3 1.14.0-1 ii libdw1 0.186-1 ii libglib2.0-02.72.1-1 ii libreadline88.1.2-1.2 ii libudev1250.4-1 ii lsb-base11.1.0 ii udev250.4-1 bluez recommends no packages. Versions of packages bluez suggests: pn pulseaudio-module-bluetooth -- no debconf information
Bug#684305: umlet: diff for NMU version 11.3-5.1
Hello Gregor, thanks for the NMU it looks ok to me, but I am not sure if it might not break things for the future (I will deal with those with the next upload, since I also intend to upload a new version of umlet). Perhaps you can answer me some questions, with regards to the NMU? * "/usr/bin/umlet" looks like this: ---begin--- #!/bin/sh # Include the wrappers utility script . /usr/lib/java-wrappers/java-wrappers.sh # We need java6 runtime find_java_runtime java6 run_java -jar /usr/share/java/umlet.jar "$@" ---end--- Will this work with a java7 system only (i.e. once default-java changed to java7)? * What is the recommended way to find/use a java version with at least java6 compatibility? Lacking a proper way here was the main reason, why I hardcoded the openjdk6 dependency. * You did add the option: -o"-encoding utf8" to the jh_build command. Was this neccessary to make the package compile? Btw. I see no reason to rush this bug, so I do not fully understand why you NMUed this without giving any information beforehand. It is usually a good idea to contact the maintainer first (and required by policy). It is (was) on my agenda but might still take some time. Best regards, Ben On Sat, 2013-06-01 at 15:09 +0200, gregor herrmann wrote: > tags 684305 + pending > thanks > > Dear maintainer, > > I've prepared an NMU for umlet (versioned as 11.3-5.1) and > uploaded it to DELAYED/2. Please feel free to tell me if I > should delay it longer. > > Regards. > -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#701214: Aw: Re: Bug#701214: warmux: [Solution] immediately stops when start playing game
Oh sure, change the Changelog entry any way you like, certainly I forgot about the "Closes:" part... Since it won't be an NMU you have to change the changelog entry anyways. Best regards Benjamin Gesendet: Mittwoch, 17. April 2013 um 03:19 Uhr Von: "John Paul Adrian Glaubitz" An: "Benjamin Mesing" , "Felix Geyer" , 701...@bugs.debian.org Betreff: Re: Bug#701214: warmux: [Solution] immediately stops when start playing game > debdiff attached. Let me know, if I can be of further help. I'd be happier if the changelog entry rather looked like this: +warmux (1:11.04.1+repack-3.1) unstable; urgency=medium + + * Non-maintainer upload. + * Do not rely on dirent.d_type when calling readdir as + this breaks on certain filesystems (Closes: #701214). + + -- Benjamin Mesing Tue, 16 Apr 2013 21:15:25 +0200 + Cheers, Adrian -- .''`. John Paul Adrian Glaubitz : :' : Debian Developer - glaub...@debian.org `. `' Freie Universitaet Berlin - glaub...@physik.fu-berlin.de `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913 -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#701214: warmux: [Solution] immediately stops when start playing game
Hi,
debdiff attached. Let me know, if I can be of further help.
Best regards
Ben
On Tue, 2013-04-16 at 20:31 +0200, Felix Geyer wrote:
> Hi,
>
> On 16.04.2013 20:06, Benjamin Mesing wrote:
> > Hi,
> >
> > if you have no objections, I would raise the severity.
> >
> > If desired I could also NMU the package.
>
> Please go ahead.
> There's no need for a NMU but a debdiff for me to upload
> would be appreciated.
>
> Regards,
> Felix
diff -Nru warmux-11.04.1+repack/debian/changelog warmux-11.04.1+repack/debian/changelog
--- warmux-11.04.1+repack/debian/changelog 2012-05-13 11:22:10.0 +0200
+++ warmux-11.04.1+repack/debian/changelog 2013-04-16 21:33:45.0 +0200
@@ -1,3 +1,12 @@
+warmux (1:11.04.1+repack-3.1) UNRELEASED; urgency=medium
+
+ * Non-maintainer upload.
+ * Fix #701214: does no longer rely on dirent.d_type (did not work
+on some file systems), backport from current upstream SVN
+ - Add 08_fix_dirlisting.patch
+
+ -- Benjamin Mesing Tue, 16 Apr 2013 21:15:25 +0200
+
warmux (1:11.04.1+repack-3) unstable; urgency=low
* Fix FTBFS with gcc 4.7. (Closes: #672051)
diff -Nru warmux-11.04.1+repack/debian/patches/08_fix_dirlisting.patch warmux-11.04.1+repack/debian/patches/08_fix_dirlisting.patch
--- warmux-11.04.1+repack/debian/patches/08_fix_dirlisting.patch 1970-01-01 01:00:00.0 +0100
+++ warmux-11.04.1+repack/debian/patches/08_fix_dirlisting.patch 2013-04-16 21:35:18.0 +0200
@@ -0,0 +1,67 @@
+--- a/lib/warmux/tools/file_tools.cpp
b/lib/warmux/tools/file_tools.cpp
+@@ -33,6 +33,8 @@
+ # include
+ # undef DeleteFile // windows.h defines it I think
+ #else
++# include
++# include
+ # include // getenv
+ # include // not needed by mingw
+ #endif
+@@ -275,18 +277,14 @@
+ {
+ DIR *dir;
+ struct dirent *file;
+-#ifdef __SYMBIAN32__
+ std::stringdname;
+-#endif
+ };
+
+ FolderSearch* OpenFolder(const std::string& dirname)
+ {
+ FolderSearch *f = new FolderSearch;
+ f->dir = opendir(dirname.c_str());
+-#ifdef __SYMBIAN32__
+ f->dname = dirname;
+-#endif
+
+ if (!f->dir) {
+ delete f;
+@@ -300,11 +298,11 @@
+ {
+ while ((f->file = readdir(f->dir)) != NULL) {
+
++if (
+ #ifdef __SYMBIAN32__
+-if (f->file->d_namlen && DoesFolderExist(f->dname+"/"+std::string(f->file->d_name))) {
+-#else
+-if (f->file->d_type == DT_DIR) {
++ f->file->d_namlen &&
+ #endif
++ DoesFolderExist(f->dname+"/"+std::string(f->file->d_name))) {
+ // If we are also looking for files, report it isn't one
+ if (file)
+ file = false;
+@@ -316,11 +314,11 @@
+ continue;
+
+ // This is a file and we do search for file
++if (
+ #ifdef __SYMBIAN32__
+-if (f->file->d_namlen && DoesFileExist(f->dname+"/"+std::string(f->file->d_name))) {
+-#else
+-if (f->file->d_type == DT_REG) {
++ f->file->d_namlen &&
+ #endif
++ DoesFileExist(f->dname+"/"+std::string(f->file->d_name))) {
+ file = true;
+ return f->file->d_name;
+ }
+@@ -390,4 +388,4 @@
+ }
+
+ return formated_name;
+-}
++}
+\ No newline at end of file
diff -Nru warmux-11.04.1+repack/debian/patches/series warmux-11.04.1+repack/debian/patches/series
--- warmux-11.04.1+repack/debian/patches/series 2012-05-13 11:13:02.0 +0200
+++ warmux-11.04.1+repack/debian/patches/series 2013-04-16 21:36:19.0 +0200
@@ -5,3 +5,4 @@
05_fix_build_libpng15.patch
06_fix_build_sdlnet.patch
07_fix_build_gcc47.patch
+08_fix_dirlisting.patch
signature.asc
Description: This is a digitally signed message part
Bug#688982: transmageddon: Transcoding does not work
Package: transmageddon
Version: 0.21-1
Justification: renders package unusable
Severity: grave
Dear Maintainer,
when I start transmageddon, select a video, do some output settings
and hit transcode, the GUI gets greyed out, writes "Transcoding
Progress" but the program does not do any transcoding. I've tested
several input files (with different codecs) and output settings, same
behaviour.
I've successfully used transmageddon some time ago.
On the command line transmageddon reports the following error:
> transmageddon
Gtk-Message: Failed to load module "canberra-gtk-module"
XDG video or audio directory not available
audiopasstoggle False
Traceback (most recent call last):
File "transmageddon.py", line 865, in on_transcodebutton_clicked
self._start_transcoding()
File "transmageddon.py", line 737, in _start_transcoding
self.videopasstoggle, self.interlaced, self.inputvideocaps)
File "/usr/share/transmageddon/transcoder_engine.py", line 61, in
__init__
gst.preset_set_app_dir("/usr/share/transmageddon/presets/")
AttributeError: 'module' object has no attribute 'preset_set_app_dir'
If this problem is specific to my computer, please downgrade severity.
Best regards
Ben
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored:
LC_ALL set to en_GB.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages transmageddon depends on:
ii gstreamer0.10-plugins-bad 0.10.23-7
ii gstreamer0.10-plugins-base 0.10.36-1
ii gstreamer0.10-plugins-good 0.10.31-3
ii gstreamer0.10-plugins-ugly 0.10.19-2+b2
ii python 2.7.3-2
ii python-gobject 3.2.2-1
ii python-gst0.10 0.10.22-3
ii python-gtk2 2.24.0-3
Versions of packages transmageddon recommends:
ii gnome-codec-install 0.4.7+nmu1
Versions of packages transmageddon suggests:
ii gstreamer0.10-ffmpeg 1:0.10.13-dmo1
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#639076: Info received (Bug#639076: Update planned for packagesearch?)
Hi, unfortunately I have to correct me again. It seems that the latest changes within QT/g++ (I guess it is the former) introduced some new problems, so I failed to create the release today. While I was able to solve some problems introduced by latest QT (no longer working with multiple inheritance), I am lost at why my QT based SortFilterModels stopped working. I keep getting crashes now when dealing with debtags data. Half a day of debugging and trial and error did not get me any closer to solving the problem. I might find some time throughout the week to further investigate the problem, but I have no real clue what could be causing the crashes. I now see two options: 1. I strip packagesearch of some important funkctionality and upload it on tuesday, so you can get on with libapt transition 2. You wait a while longer, to see, if I can fix packagesearch until end of next week, else proceed with 1. Please let me know about your preferences. Sorry for this, but I did try my best.. Best regards Ben > If you wish to submit further information on this problem, please > send it to 639...@bugs.debian.org. > > Please do not send mail to ow...@bugs.debian.org unless you wish > to report a problem with the Bug-tracking system. > -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#639076: Update planned for packagesearch?
> Any progress on this one? We'd really be happy to have the apt > transition move on, and that FTBFS is still a blocker currently. Please > let me know if you need any help with the upload. Sorry, I did not cc' my correction about the date to the bug :( I actually meant coming weekend (May 12th/13th). Hope it is not to late. Best regards Ben -- NEU: FreePhone 3-fach-Flat mit kostenlosem Smartphone! Jetzt informieren: http://mobile.1und1.de/?ac=OM.PW.PW003K20328T7073a -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#639076: Update planned for packagesearch?
On Thu, 2012-05-03 at 20:21 +0100, Adam D. Barratt wrote: > On Thu, 2012-02-02 at 19:26 +0100, Benjamin Mesing wrote: > > thanks for your offer. I am actually in the final phase of preparing the > > next version of packagesearch which shall include the fix for the RC bug > > as well. It might still take some time to complete it though (1-4 weeks > > at current pace). > > That was three months ago, and packagesearch is now part of the > apt/libept transitions (hence the "blocks" notation I added recently). > Is there an ETA for an upload? If not then an intermediate upload to at > least fix the FTBFS would be appreciated. Packagesearch is practically ready for release, but I am currently blocked by a bug witin libept (#670569) which returns the short instead of the long description making packagesearch somewhat useless. I would have prepared to have this one ironed out before, but I depend on Enrico there. However, it seems, that the problem occurs even for current versions of packagesearch with a recent libept, so I might as well upload a new version now and hope for the problem to go away once a fixed libept gets uploaded. I will try to make some time this weekend. Best regards Benjamin -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#639076: Update planned for packagesearch?
Hi, thanks for your offer. I am actually in the final phase of preparing the next version of packagesearch which shall include the fix for the RC bug as well. It might still take some time to complete it though (1-4 weeks at current pace). Do you know, when freeze of testing is to be expected? Best regards Benjamin On Thu, 2012-02-02 at 08:30 +0100, Salvatore Bonaccorso wrote: > Hi Benjamin! > > I'm going trough some of the RC bugs and have seen packagesearch. > > You have commited a fix upstream for it, do you plan to upload? In > case you are short of time, I can else have a look at it if needed and > check for a NMU. > > Thanks for your work, > > Regards, > Salvatore -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#639076: Fixed build error
tag 639076 +patch thanks Patch is commited to SVN: - fixed compiler error caused by xapian having a slots member variable Fix: #undef slots before including xapian and using Q_SLOTS: in most places instead of slots: Closes: #639076 -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#639076: packagesearch: FTBFS: keymaker.h:64:10: error: a template-id may not appear in a using-declaration
Hi, I have a suspicion what is causing the problem: /usr/include/xapian/keymaker.h declares a member variable named "slots" and I am using QT, where this symbol might be redefined by some makro-magic. I won't have time to create a fix within the next one or two weeks, but I hope I can fix it afterwards. Best regards Ben On Tue, 2011-08-23 at 23:36 +0200, Philippe Le Brouster wrote: > Source: packagesearch > Version: 2.6 > Severity: serious > Tags: wheezy sid > User: debian...@lists.debian.org > Usertags: qa-ftbfs-20110822 qa-ftbfs > Justification: FTBFS on amd64 > > Hi, > > During a rebuild of all packages in sid, your package failed to build on > amd64. > > Relevant part: > > g++ -c -m64 -pipe -include workarounds.h -O2 -I/usr/include/tagcoll-2.0.12 > > -I/usr/include/tagcoll-2.0.12 -D_REENTRANT -Wall -W -DQT_NO_DEBUG > > -DQT_XML_LIB -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED > > -I/usr/share/qt4/mkspecs/linux-g++-64 -I. -I/usr/include/qt4/QtCore > > -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtXml -I/usr/include/qt4 -I. > > -I.moc -I.ui -o .obj/runcommandinxterm.o runcommandinxterm.cpp > > In file included from /usr/include/xapian/enquire.h:33:0, > > from /usr/include/xapian.h:46, > > from helpers.h:21, > > from main.cpp:24: > > /usr/include/xapian/keymaker.h:64:10: error: a template-id may not appear > > in a using-declaration > > /usr/include/xapian/keymaker.h: In member function 'void > > Xapian::MultiValueKeyMaker::add_value(Xapian::valueno, bool)': > > /usr/include/xapian/keymaker.h:77:7: error: expected primary-expression > > before '.' token > > /usr/include/xapian/keymaker.h: At global scope: > > /usr/include/xapian/keymaker.h:110:10: error: a template-id may not appear > > in a using-declaration > > /usr/include/xapian/keymaker.h: In member function 'void > > Xapian::MultiValueSorter::add(Xapian::valueno, bool)': > > /usr/include/xapian/keymaker.h:123:7: error: expected primary-expression > > before '.' token > > make[2]: *** [.obj/main.o] Error 1 > > The full build log is available from: > > http://people.debian.org/~lucas/logs/2011/08/22/packagesearch_2.6_lsid64.buildlog > > A list of current common problems and possible solutions is available at > http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! > > About the archive rebuild: The rebuild was done on about 50 AMD64 nodes > of the Grid'5000 platform, using a clean chroot. Internet was not > accessible from the build systems. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#504896: Patch
tags 504896 +patch thanks Just add #include into wibble/string.h that's it. Best regards Ben -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#554385: [Pkg-virtualbox-devel] Bug#554385: virtualbox-ose-source does not compile for kernel 2.6.31-1
severity 554385 normal retitle 554385 virtualbox-ose-source does not compile using m-a thanks Hi It seems there was indeed some stale source lying around in /usr/src/modules/virtualbox-ose (though I do not know how it got there, I can remember doing something manually). After your post, I realised that when running "m-a a-i vboxdrv" I got the following error messages before the build dialog appeared: Getting source for kernel version: 2.6.31-1-amd64 Kernel headers available in /lib/modules/2.6.31-1-amd64/build apt-get install build-essential Reading package lists... Done Building dependency tree Reading state information... Done build-essential is already the newest version. upgraded. Done! unpack The source tarball could not be found! Package virtualbox-ose-source not installed? Running "m-a -f get virtualbox-ose-source" may help. "/usr/share/modass/packages/default.sh" build KVERS=2.6.31-1-amd64 KSRC=/lib/modules/2.6.31-1-amd64/build KDREV=2.6.31-1 kdist_image As suggested I then ran "m-a -f get virtualbox-ose-source" and it did build the virtualbox modules automatically and successfully. I tried to run "m-a a-i virtualbox-ose-source" again and got the same error as before. I then removed the /usr/src/modules/virtualbox-ose directory manually and it didn't reappear (neither by running aptitude install virtualbox-ose-source nor "m-a -f get virtualbox-ose-source"). So it seems the source required for m-a is not available any more? With the directory removed "m-a a-i" produces the following error Updated infos about 1 packages Getting source for kernel version: 2.6.31-1-amd64 Kernel headers available in /lib/modules/2.6.31-1-amd64/build apt-get install build-essential Reading package lists... Done Building dependency tree Reading state information... Done build-essential is already the newest version. Done! unpack The source tarball could not be found! Package virtualbox-ose-source not installed? Running "m-a -f get virtualbox-ose-source" may help. "/usr/share/modass/packages/default.sh" build KVERS=2.6.31-1-amd64 KSRC=/lib/modules/2.6.31-1-amd64/build KDREV=2.6.31-1 kdist_image find: `/usr/src/modules/virtualbox*': No such file or directory Best regards Ben -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#554385: virtualbox-ose-source does not compile for kernel 2.6.31-1
Package: virtualbox-ose-source
Version: 3.0.10-dfsg-1
Severity: grave
Justification: renders package unusable
When trying to build via m-a it fails with the following output:
begin output
kmk -f debian/rules clean
kmk: Nothing to be done for `clean'.
kmk -f debian/rules kdist_clean kdist_config binary-modules
kmk - --jobserver-fds=3,4 -j -f debian/rules clean
kmk[1]: Entering directory `/usr/src/modules/virtualbox-ose'
kmk[1]: Nothing to be done for `clean'.
kmk[1]: Leaving directory `/usr/src/modules/virtualbox-ose'
kmk: Nothing to be done for `kdist_config'.
for templ in ; do \
cp $templ `echo $templ | sed -e 's/_KVERS_/2.6.31-1-amd64/g'` ; \
done
for templ in `ls debian/*.modules.in` ; do \
test -e ${templ%.modules.in}.backup || cp ${templ%.modules.in}
${templ%.modules.in}.backup 2>/dev/null || true; \
sed -e 's/##KVERS##/2.6.31-1-amd64/g ;s/#KVERS#/2.6.31-1-amd64/g ;
s/_KVERS_/2.6.31-1-amd64/g ; s/##KDREV##/2.6.31-
done
dh_testroot
dh_clean -k
# Build the module
kmk -C /lib/modules/2.6.31-1-amd64/build M=/usr/src/modules/virtualbox-ose
kmk[1]: Entering directory `/usr/src/linux-headers-2.6.31-1-amd64'
kmk[2]: Entering directory `/usr/src/linux-headers-2.6.31-1-common'
kmk[3]: Entering directory `/usr/src/linux-headers-2.6.31-1-amd64'
kmk[4]: Entering directory `/usr/src/linux-headers-2.6.31-1-amd64'
/usr/src/modules/virtualbox-ose/linux/SUPDrv-linux.c: In function
‘VBoxDrvLinuxCreate’:
/usr/src/modules/virtualbox-ose/linux/SUPDrv-linux.c:734: error: ‘struct
task_struct’ has no member named ‘euid’
/usr/src/modules/virtualbox-ose/linux/SUPDrv-linux.c:735: error: ‘struct
task_struct’ has no member named ‘egid’
kmk[4]: *** [/usr/src/modules/virtualbox-ose/linux/SUPDrv-linux.o] Error 1
kmk[4]: *** Waiting for unfinished jobs
kmk[4]: Leaving directory `/usr/src/linux-headers-2.6.31-1-amd64'
kmk[4]: Entering directory `/usr/src/linux-headers-2.6.31-1-amd64'
kmk[4]: *** Exiting with status 2
kmk[3]: *** [_module_/usr/src/modules/virtualbox-ose] Error 2
kmk[3]: Leaving directory `/usr/src/linux-headers-2.6.31-1-amd64'
kmk[2]: *** [sub-make] Error 2
kmk[2]: Leaving directory `/usr/src/linux-headers-2.6.31-1-common'
kmk[1]: *** [all] Error 2
kmk[1]: Leaving directory `/usr/src/linux-headers-2.6.31-1-amd64'
kmk: *** [binary-modules] Error 2
make: *** [kdist_build] Error 2
end output
Best regards
Benjamin
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.31-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to en_GB.UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages virtualbox-ose-source depends on:
ii dkms 2.1.0.1-1 Dynamic Kernel Module Support Fram
virtualbox-ose-source recommends no packages.
virtualbox-ose-source suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#532029: konsole: Does not support -T option as required by the policy
Hi, > I have read this bug report and created a patch that make konsole do nothing > on -T. That's definitely better then the current behaviour. Of course it would be preferable to set the title and let it stay fixed when running with -T option. One could argue, that ignoring the -T option is still a violation of the policy, but I think that would be to dogmatic :-) If its to much hassle to fix it, ignoring -T is a reasonable compromise. Aspect oriented programming would come in handy here - all calls to setting the title could be intercepted. To bad it's not used for konsole (not that's used much anywhere else..). The bug should not be closed though, but merely downgraded, because IMO its still a bug if the -T option is ignored. Or it might get wontfix. Best regards Benjamin -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#291734: Move to wastbin on different partitions silently deletes the file
severity 291734 minor
thanks
My sincere apologies the mistake was on my side. I've tried the same
under another account, and the behaviour is as expected. It seems that
somewhen in the past I must have checked the do not ask again box.
After figuring that out, I was able to reenabled the confirmation-dialog
by modifiying the gconf database settings.
Best regards
Ben
On Wed, 2008-10-01 at 23:04 +0200, David Paleino wrote:
> fixed 291734 3:2.11.0~svn2319-1
> fixed 291734 3:2.10.8-1
> tags 291734 moreinfo unreproducible
> thanks
>
> On Wed, 01 Oct 2008 21:53:33 +0200, Benjamin Mesing wrote:
>
> > severity 291734 grave
> > thanks
> >
> > Justification for severity: Causes data loss
>
> Hello,
>
> > The Move to wastebin operation is supposed to move data to the wastebin.
> > If this is not possible, it should *not* delete the data silently,
> > because people might rely on the data to be available.
> > In fact, I have lost a file today, because I've disabled "confirm
> > delete", relying on gthumb to move deleted images to the wastebin. Today
> > acidently hitting "Del" for a file on an external left me no way to
> > restore it. A sound response to being unable to move to wastebin would
> > be a dialog asking how to proceed ("Delete Image" or "Cancel").
>
> I can't really reproduce the bug. I tried both with the versions in unstable
> and in experimental branches (see the version numbers above), and none of them
> shows the bug. This is what I did:
>
> ~$ mount | grep -e " / " -e "/home"
> /dev/sda1 on / type reiserfs (rw,notail,user_xattr)
> /dev/sda6 on /home type reiserfs (rw,user_xattr)
> ~$
> ~$ # the above are two different partitions, right?
> ~$
> ~$ pwd
> /home/neo/
> ~$ sudo cp image.jpg /
> ~$ ls /*.jpg
> /image.jpg
> ~$ cd /
> /$ gthumb .
> [..]
>
> I hit "Delete" and I get:
>
> "The selected images will be moved to the Trash, are you sure?"
>
> I click on "Move", it then appears:
>
> "The images cannot be moved to the Trash. Do you want to delete them
> permanently?"
>
> with a checkbox "Do not display this message again". I can click "Cancel" or
> "Delete" then. Cancel keeps the image, Delete deletes it.
> I believe this is the desired behaviour in this bug, no?
>
> Please, try to be more specific on the steps to do to reproduce the bug. I
> don't have any disk space to set up a brand new Debian just to triage this
> bug.
>
> Kindly,
> David
>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#485980: flashplugin-nonfree: Fails to install for nspluginwrapper
Package: flashplugin-nonfree Version: 1:1.5 Severity: grave Justification: renders package unusable When installing I get the following error message. Setting up nspluginwrapper (0.9.91.5-2) ... Setting up flashplugin-nonfree (1:1.5) ... *** NSPlugin Viewer *** preloader not found nspluginwrapper: no appropriate viewer found for /usr/lib/flashplugin-nonfree/libflashplayer.so I had the flashplugin working at one point, but after an upgrade of my system it stopped working (I am not sure what exactly changed). I've tried to purge and reinstall nspluginwrapper and flashplugin-nonfree with the result described above. I've found a similar report for Ubuntu at https://bugs.launchpad.net/ubuntu/+source/nspluginwrapper/+bug/235946 Running "nspluginwrapper -i /usr/lib/flashplugin-nonfree/libflashplayer.so" manually leads to the same error as above. Best regards Benjamin -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages flashplugin-nonfree depends on: ii debconf [debconf-2.0] 1.5.14 Debian configuration management sy ii fontconfig 2.4.2-1.2generic font configuration library ii gnupg 1.4.6-2 GNU privacy guard - a free PGP rep ii ia32-libs-gtk 2.1 gtk+ ia32 shared libraries ii lib32z1 1:1.2.3.3.dfsg-5 compression library - 32 bit runti ii nspluginwrapper 0.9.91.5-2 A wrapper to run Netscape plugins ii wget1.10.2-3 retrieves files from the web flashplugin-nonfree recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#469321: packagesearch: Does not build on amd64
Thanks for the patch - I have used the crude version before (QMAKE_LFLAGS = ). I thought I've tried "-=" but it seems I somehow didn't get the syntax right. A fixed version was just uploaded by my sponsor. Best regards Benjamin On Tue, 2008-03-04 at 13:56 -0300, Felipe Sateler wrote: > Package: packagesearch > Version: 2.2.6 > Severity: serious > Tags: patch > Justification: no longer builds from source > > packagesearch is failing to build at least on amd64[1]. The problem > seems to be that plugins use symbols from the packagesearch binary but > gcc is being called with -Wl,--no-undefined. Attached is a patch that > removes said flag from the build, since it is not necessary. > > > [1] > http://buildd.debian.org/fetch.cgi?pkg=packagesearch;ver=2.2.6%2Bb2;arch=amd64;stamp=1199919848 > > -- System Information: > Debian Release: lenny/sid > APT prefers unstable > APT policy: (500, 'unstable') > Architecture: amd64 (x86_64) > > Kernel: Linux 2.6.24-1-amd64 (SMP w/2 CPU cores) > Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > > Versions of packages packagesearch depends on: > ii apt [libapt-pkg-libc6. 0.7.11Advanced front-end for dpkg > ii debtags1.7.3+b3 Enables support for package tags > ii libc6 2.7-9 GNU C Library: Shared libraries > ii libept00.5.14High-level library for managing > De > ii libgcc11:4.3.0~rc2-1 GCC support library > ii libqt4-core4.3.4-1 Qt 4 core non-GUI functionality > ru > ii libqt4-gui 4.3.4-1 Qt 4 core GUI functionality > runtim > ii libqt4-qt3support 4.3.4-1 Qt 3 compatibility library for > Qt > ii libstdc++6 4.3.0~rc2-1 The GNU Standard C++ Library v3 > ii libxapian151.0.5-1 Search engine library > ii zlib1g 1:1.2.3.3.dfsg-11 compression library - runtime > > Versions of packages packagesearch recommends: > ii apt-file2.0.8.2 APT package searching utility -- > c > ii deborphan 1.7.23 Find orphaned libraries > ii konsole [x-terminal-emu 4:3.5.8.dfsg.1-7 X terminal emulator for KDE > ii xterm [x-terminal-emula 232-1X terminal emulator > > -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#467645: password-gorilla: Fails to launch after installation (Missing dependency?)
Package: password-gorilla Version: 1.4-2 Severity: grave Justification: renders package unusable When trying to launch password gorilla I get an error method saying, that I need to install the [inr Tcl] package and the program exits. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.24-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages password-gorilla depends on: ii bwidget 1.8.0-2A set of extension widgets for Tcl ii itcl3 3.2.1-4[incr Tcl] OOP extension for Tcl - ii tcl8.48.4.15-1 Tcl (the Tool Command Language) v8 ii tk8.4 8.4.15-1 Tk toolkit for Tcl and X11, v8.4 - password-gorilla recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#458884: 458884: packagesearch woes
tags 458884 +pending thanks Hello, > Was this comment supposed to go to another package? Yes, the comment was meant for libqt4-dev and reposted there (Cmp. #458558). Since that bug won't be fixed I had to work around the bug. Only two days ago I have uploaded a new version of packagesearch containing a fix to my sponsor, who I hope will upload it to the archive soon. > packagesearch has been crashing at the drop of a hat for me for months > (basically, whenever I leave it up for awhile and then come back to it). This is known, and unfortunately not easy to fix. The problem is, that the backend library (libept-dev) switched from working on a copy of the apt-database to working on the database itself. However, it does not handle it gracefully, if the package database changes (i.e. it causes a crash). So packagesearch crashes whenever you do something after the database has changed. A bug is open against libept-dev (#442841) and I am periodically nagging Enrico to fix this bug - which would allow for packagesearch to become stable again. > Recently aptitude has become very insistent about giving it the boot, > probably because of an upgrade to the apt tools. This should be solved with the new upload. Best regards and thanks for sticking with packagesearch Benjamin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#458884: Any fixes available?
Hello, this bug has cause packagesearch to be removed from testing, due to a resulting FTBS. Is anyone working on a fix? I would hate to see packagesearch not making it into lenny due to this bug. Best regards Benjamin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#367731: Patch prepared
tag 367731 +patch thanks I have prepared a patch. I did not encounter any problems, the patch seems straigtforward to me. The only problem I was able to detect is, that when updating iptotal an error is reported: dpkg -i iptotal_0.3.3-6.1_amd64.deb (Reading database ... 156305 files and directories currently installed.) Preparing to replace iptotal 0.3.3-6 (using iptotal_0.3.3-6.1_amd64.deb) ... Stopping iptotal: iptotal. Unpacking replacement iptotal ... postrm called with unknown argument `upgrade' dpkg: warning - old post-removal script returned error exit status 1 dpkg - trying script from the new package instead ... dpkg: ... it looks like that went OK. Setting up iptotal (0.3.3-6.1) ... Starting iptotal: iptotal. However, the error is non-fatal (actually I believe it is not really a problem, just a missing empty case-block in the postrm script) and the recovery mechanism works just fine. Also, it is not caused by the patch but is in the current code base. Since it is not critical, I refrained from fixing it. If you see any problems with the patch, please let me know. Otherwise you could prepare a new upload based on the fix or I could ask my AM to sponsor an NMU. Regards Ben diff -ur iptotal-debian-orig/debian/postinst iptotal-0.3.3/debian/postinst --- iptotal-debian-orig/debian/postinst 2007-08-28 19:16:35.0 +0200 +++ iptotal-0.3.3/debian/postinst 2007-08-28 18:46:42.0 +0200 @@ -20,8 +20,11 @@ case "$1" in configure) update-rc.d iptotal defaults >/dev/null -/etc/init.d/iptotal start - +if which invoke-rc.d >/dev/null 2>&1; then + invoke-rc.d iptotal start +else +/etc/init.d/iptotal start +fi ;; abort-upgrade|abort-remove|abort-deconfigure) diff -ur iptotal-debian-orig/debian/prerm iptotal-0.3.3/debian/prerm --- iptotal-debian-orig/debian/prerm 2007-08-28 19:16:35.0 +0200 +++ iptotal-0.3.3/debian/prerm 2007-08-28 18:45:41.0 +0200 @@ -19,7 +19,11 @@ case "$1" in remove|upgrade|deconfigure) - /etc/init.d/iptotal stop +if which invoke-rc.d >/dev/null 2>&1; then + invoke-rc.d iptotal stop +else +/etc/init.d/iptotal stop +fi ;; failed-upgrade) ;;
Bug#367731: Fixing this bug as part of NM
As part of my NM application I am asked to fix an RC bug. I would like to go with this one, which is open for quite some time. If I am able to work it out, I will prepare a patch. I will also prepare an NMU (as part of my NM task), so if you'd like the fix can probably be NMUed. Regards Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#429005: FTBS Bug
> This has been pending for quite awhile. Has something gone astray? > > I love packagesearch, and would love to get it back :) Glad you like it :-) The new version's full text search should be lighting fast. This is what Enrico told me anyways :-), whose backend I am using. Actually the fix (together with another one) has been sent to my sponsor, who discovered a bug in the new version (which does not surface on my machine). We might decide to upload the new version nevertheless. Meanwhile you can get the binary package [1] if you have a amd64 architecture, or download the source [2] and build it yourself. It would be also interesting, if you could reproduce the bug my sponsor discovered. Just try out, if the related search works fine and tell me the architecture you are on. Thanks for your support Ben [1] http://www.mesing.de/packagesearch/packagesearch_2.2.6_amd64.deb [2] http://www.mesing.de/packagesearch/packagesearch_2.2.6.tar.gz > > Ross Boylan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#429005: FTBS Bug
Sorry for not reacting until now, but I am currently fairly busy. So if someone wants to NMU a fix, I would be grateful for that. Otherwise I will be probably be able to prepare an upload within the next four weeks. Regards Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#395465: Bug report on IceWM
I've found a bug report for this problem against IceWM. I do not know if this is a QT or an IceWM bug. http://sourceforge.net/tracker/index.php?func=detail&aid=1573405&group_id=31&atid=100031 Best regards Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#395465: libqt4-gui: QT4 GUI applications cause IceWM to crash when closing
Package: libqt4-gui
Version: 4.2.1-1
Severity: grave
Justification: renders package unusable
Hello,
when closing a QT4-GUI applications this seems to crash my window manager IceWM.
E.g. all window decorations are lost.
This problem does not occur when running KDE.
I've encountered those crashes with e.g. the QT-Assistent, packagesearch as well
as a self compiled application as simple as:
#include
#include
int main(int argc, char **argv)
{
QApplication a(argc, argv);
QMainWindow window;
window.show();
return a.exec();
}
Note that Ctrl+C'ing or killing the program does not result in a crash
of the WM.
I've made it severity grave, cause this prevents IceWM users from using any
QT4 GUI-application.
Best regards
Ben
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17.6
Locale: LANG=en_GB.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to en_GB.UTF-8)
Versions of packages libqt4-gui depends on:
ii fontconfig 2.3.2-5.1generic font configuration library
ii libaudio2 1.7-9The Network Audio System (NAS). (s
ii libc6 2.3.6-11 GNU C Library: Shared libraries
ii libfontconfig1 2.4.1-2 generic font configuration library
ii libfreetype62.2.1-2 FreeType 2 font engine, shared lib
ii libgcc1 1:4.1.1-13 GCC support library
ii libgl1-mesa-glx [libgl1]6.4.2-1 A free implementation of the OpenG
ii libglib2.0-02.12.4-1 The GLib library of C routines
ii libglu1-mesa [libglu1] 6.4.2-1 The OpenGL utility library (GLU)
ii libice6 1:1.0.0-3X11 Inter-Client Exchange library
ii libjpeg62 6b-13The Independent JPEG Group's JPEG
ii libmng1 1.0.9-1 Multiple-image Network Graphics li
ii libpng12-0 1.2.8rel-5.1 PNG library - runtime
ii libqt4-core 4.2.1-1 Qt 4 core non-GUI functionality ru
ii libsm6 1:1.0.0-4X11 Session Management library
ii libstdc++6 4.1.1-13 The GNU Standard C++ Library v3
ii libx11-62:1.0.0-6X11 client-side library
ii libxcursor1 1.1.5.2-5X cursor management library
ii libxext61:1.0.0-4X11 miscellaneous extension librar
ii libxfixes3 1:4.0.1-4X11 miscellaneous 'fixes' extensio
ii libxinerama11:1.0.1-4X11 Xinerama extension library
ii libxrandr2 2:1.1.0.2-4 X11 RandR extension library
ii libxrender1 1:0.9.0.2-4 X Rendering Extension client libra
ii libxt6 1:1.0.0-5X11 toolkit intrinsics library
ii zlib1g 1:1.2.3-11 compression library - runtime
Versions of packages libqt4-gui recommends:
ii qt4-qtconfig 4.1.2-2Qt 4 configuration tool
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#391468: gatos obsolete?
Hello, so let me get things straight: the TV-software in the gatos package works only with the original gatos drivers? Somehow the description gave another impression. > > while fixing #391468 the question was raised, whether gatos has been > > merged into X.org 7 and could be dropped. > > Some parts of it have been merged, basically TV-in AFAIK. But I don't > have any first hand experience with this. Yes, I believe so. >From looking at my /var/log/Xorg.log file the it is the "theatre" chip responsible: [..] (II) Loading sub module "theatre_detect" (II) LoadModule: "theatre_detect" (II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so (II) Module theatre_detect: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (II) RADEON(0): No response from device 0 on VIP bus (II) RADEON(0): Device 1 on VIP bus ids as 0x4d541002 (II) RADEON(0): No response from device 2 on VIP bus (II) RADEON(0): No response from device 3 on VIP bus (II) RADEON(0): Detected Rage Theatre as device 1 on VIP bus with id 0x4d541002 (II) RADEON(0): Detected Rage Theatre revision 0003 (II) RADEON(0): video decoder type is 0x40d8 (BIOS value) versus 0x40d8 (current PLL setting) (II) RADEON(0): Tuner is on port 0 (II) RADEON(0): Composite connector is port 2 (II) RADEON(0): SVideo connector is port 6 (II) RADEON(0): Rage Theatre: Connectors (detected): tuner=0, composite=2, svideo=6 (II) RADEON(0): RageTheatre: Connectors (using): tuner=0, composite=2, svideo=6 (II) RADEON(0): video decoder type used: 0x0006 (II) RADEON(0): Going to load the corresponding theatre module (II) Loading sub module "theatre" (II) LoadModule: "theatre" (II) Loading /usr/lib/xorg/modules/multimedia/theatre_drv.so (II) Module theatre: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (II) RADEON(0): Rage Theatre setting standard 0x (II) RADEON(0): Rage Theatre setting standard 0x (II) RADEON(0): Rage Theatre setting standard 0x (**) RADEON(0): RADEONScreenInit finished (==) RandR enabled [..] So now Radeon AIW TV-in is supposed to work using Xvideo capable TV applications, right? I have tried kdetv which reproducable froze my *whole* system. Xawtv showed the typical TV noise, but since it failed to bring up the options and channel-select window, I was unable to test any further. But those are issues for another bug report.. Btw. if anyone could recommend another Xvideo aware TV application I would be very glad. Regards Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#391468: xatitv: fails to start with: "GATOS: gatos_inita(): Invalid argument"
> > Could you please tell me how to apply the patch? > > It looks like the tabs in the patch have been converted to spaces. Try > using the -l (ignore whitespace changes) option to patch. Thanks, that did the trick. However, the patched seems not to achieve anything. I am still getting the same error. $ gdb atitv [GDB License information] (gdb) run snap test.ppm Starting program: /usr/bin/atitv snap test.ppm Failed to read a valid object file image from memory. (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) GATOS: No ATI PCI/AGP Cards ? GATOS: gatos_inita(): Invalid argument Program received signal SIGSEGV, Segmentation fault. 0xb7ef25a3 in r128_enable_capture () from /usr/lib/libgatos.so.0 (gdb) I do not know how to build the debug version, so if you need a better backtrace, please enlighten me about that. Best regards Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#391468: xatitv: fails to start with: "GATOS: gatos_inita(): Invalid argument"
On Mon, 2006-10-16 at 23:43 +0200, Bas Zoetekouw wrote:
> [The reporter of the bug sent me an strace by private mail and ask me
> not to post it here]
For the archive:
Attached you find the strace stripped of the sensitive environment
variable setup, everything else is included.
Straces are for running atitv as regular user and as root.
brk(0) = 0x8057000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0xb7f8d000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
0xb7f8c000
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_dev=makedev(3, 1), st_ino=406228, st_mode=S_IFREG|0644,
st_nlink=1, st_uid=0, st_gid=0, st_blksize=131072, st_blocks=144,
st_size=70187, st_atime=2006/10/16-20:41:28, st_mtime=2006/10/06-16:16:02,
st_ctime=2006/10/06-16:16:02}) = 0
mmap2(NULL, 70187, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f7a000
close(3)= 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/usr/lib/libgatos.so.0", O_RDONLY) = 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\20l\0\0004\0\0\0H\305\5\0\0\0\0\0004\0
\0\4\0([EMAIL PROTECTED]@[EMAIL PROTECTED]@[EMAIL
PROTECTED];\0\0\0\214\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\214\1\0\0\0\0\0\0\244\0\0\0\257\0\0\0\f\0\0\0f\1\0\0\311\0\0\0,\1\0\0\0\0\0\0\0\0\0\0\363\0\0\0?\1\0\0`\0\0\0e\1\0\0\336\0\0\0\264\0\0\0J\1\0\0\0\0\0\0\217\0\0\0\177\1\0\0\"\1\0\0\0\0\0\0\0\0\0\0[\1\0\0\3\1\0\0\0\0\0\0D\1\0\0\26\0\0\0\326\0\0\0\0\0\0\0G\1\0\0008\1\0\0\0\0\0\0o\1\0\0z\1\0\0\34\0\0\0\0\0\0\0:\1\0\0\226\1\0\0\0\0\0\0\304\0\0\0S\1\0\0\0\0\0\0\0\0\0\0\302\0\0\0.\1\0\0Q\1\0\0x\0\0\0\202\0\0\0v\0\0\0\203\0\0\0\0\0\0\0\0\0\0\0M\1\0\0k\1\0\0\0\0\0\0R\0\0\0\212\0\0\0\324\0\0\0\367\0\0\0\241\1\0\0T\1\0\0\0\0\0\0c\1\0\0\222\0\0"...,
512) = 512
fstat64(3, {st_dev=makedev(3, 1), st_ino=264944, st_mode=S_IFREG|0644,
st_nlink=1, st_uid=0, st_gid=0, st_blksize=131072, st_blocks=744,
st_size=379144, st_atime=2006/10/16-20:41:28, st_mtime=2006/01/18-01:19:13,
st_ctime=2006/10/06-13:47:32}) = 0
mmap2(NULL, 449440, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0xb7f0c000
mmap2(0xb7f35000, 217088, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x28) = 0xb7f35000
mmap2(0xb7f6a000, 64416, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f6a000
close(3)= 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/tls/libm.so.6", O_RDONLY)= 3
read(3, "[EMAIL PROTECTED]
\0\10\0(\0\36\0\35\0\6\0\0\0004\0\0\0004\0\0\0004\0\0\0\0\1\0\0\0\1\0\0\5\0\0\0\4\0\0\0\3\0\0\0008(\2\0008(\2\0008(\2\0\23\0\0\0\23\0\0\0\4\0\0\0\1\0\0\0\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0P(\2\0P(\2\0\5\0\0\0\0\20\0\0\1\0\0\0\344.\2\0\344>\2\0\344>\2\0X\1\0\0\234\1\0\0\6\0\0\0\0\20\0\0\2\0\0\0\370.\2\0\370>\2\0\370>\2\0\340\0\0\0\340\0\0\0\6\0\0\0\4\0\0\0\4\0\0\0004\1\0\0004\1\0\0004\1\0\0
\0\0\0
\0\0\0\4\0\0\0\4\0\0\0Q\345td\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\6\0\0\0\4\0\0\0R\345td\344.\2\0\344>\2\0\344>\2\0\20\1\0\0\20\1\0\0\4\0\0\0\4\0\0\0\4\0\0\0\20\0\0\0\1\0\0\0GNU\0\0\0\0\0\2\0\0\0\6\0\0\0\0\0\0\0]\2\0\0`\1\0\0\216\0\0\0_\1\0\0\205\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0&\0\0\0\0\0\0\0\0\0\0\0\250\0\0\0\0\0\0\0\0\0\0\0N\1\0\0\0\0\0\0A\1\0\0\0\0\0\0\0\0\0\0\370\0\0\0\304\0\0\0\32\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\277\0\0\0\325\0\0\0\371\0\0\0\0\0\0\0\0\0\0\0?\0\0\0\0\0\0\0F\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0)\1\0\0&\1\0\0\0"...,
512) = 512
fstat64(3, {st_dev=makedev(3, 1), st_ino=288087, st_mode=S_IFREG|0644,
st_nlink=1, st_uid=0, st_gid=0, st_blksize=131072, st_blocks=288,
st_size=145136, st_atime=2006/10/16-20:41:28, st_mtime=2006/08/24-22:40:52,
st_ctime=2006/09/12-11:08:13}) = 0
mmap2(NULL, 147584, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) =
0xb7ee7000
mmap2(0xb7f0a000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22) = 0xb7f0a000
close(3)= 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/tls/libc.so.6", O_RDONLY)= 3
read(3,
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\240O\1\0004\0\0\0<\370\22\0\0\0\0\0004\0
\0\n\0(\0>[EMAIL PROTECTED]@[EMAIL
PROTECTED]<\335\22\0<\335\22\0<\335\22\0\350\0\0\0\350\0\0\0\6\0\0\0\4\0\0\0\4\0\0\0t\1\0\0t\1\0\0t\1\0\0
\0\0\0
\0\0\0\4\0\0\0\4\0\0\0\7\0\0\0\274\302\22\0\274\302\22\0\274\302\22\0\10\0\0\0(\0\0\0\4\0\0\0\4\0\0\0P\345td\24d\22\0\24d\22\0\24d\22\0|\17\0\0|\17\0\0\4\0\0\0\4\0\0\0Q\345td\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\6\0\0\0\4\0\0\0R\345td\\\201\22\0\\\201\22\0\\\201\22\0\254\\\0\0\254\\\0\0\4\0\0\0
\0\0\0\4\0\0\0\20\0\0\0\1\0\0\0GNU\0\0\0\0\0\2\0\0\0\6\0\0\0\0\0\0\0\377\3\0\0m\10\0\0\5\1\0\0\214\6\0\0U\2\0\0\
Bug#391468: xatitv: fails to start with: "GATOS: gatos_inita(): Invalid argument"
Hi Bas, > OK, I've built packages with debugging symbols turned on [1] > Could you try > running it in gdb and getting a backtrace after the crash? Ie, run "gdb > /usr/bin/atitv" (as root), type "run", and after the crash, type "bt". Here is the gdb session (as root): $ gdb atitv [GDB license information] (gdb) run snap test.ppm Starting program: /usr/bin/atitv snap test.ppm Failed to read a valid object file image from memory. GATOS: No ATI PCI/AGP Cards ? GATOS: gatos_inita(): Invalid argument Program received signal SIGSEGV, Segmentation fault. 0xb7f24d99 in r128_enable_capture (enable=1) at atir128.c:221 221 atir128.c: No such file or directory. in atir128.c (gdb) bt #0 0xb7f24d99 in r128_enable_capture (enable=1) at atir128.c:221 #1 0xb7f2e0f7 in ati_enable_capture (enable=1) at ati.c:72 #2 0xb7f199b9 in gatos_enable_capture (value=1) at gatos.c:876 #3 0x0804928e in ?? () #4 0x0001 in ?? () #5 0xb7ec8e95 in _libc_intl_domainname () from /lib/tls/libc.so.6 #6 0x in ?? () (gdb) It looks pretty weird, I definitely do not have a Rage 128. Current Kernel version is 2.6.18 I am using the regular X driver, no special gatos driver. When I had a working setup about 2 years ago I had to use the special driver, but as you mentioned, the website indicates, that this is no longer required. Regards Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#391468: xatitv: fails to start with: "GATOS: gatos_inita(): Invalid argument"
Hi Bas, > Could you send an strace of the atitv call? > "strace -s512 -ff -v atitv snap test.ppm > /tmp/strace.txt 2>&1" should > do the trick, resulting in the trace in /tmp/strace.txt. I will send it as soon as I am back home. > Also, are you sure this card is supported? > http://gatos.sourceforge.net/supported_cards.php doesn't mention the > 7200. It should be that one: All-in-Wonder Radeon (Radeon) It definetely worked around 2years ago, when I last (successfully) tried the TV capabilities of my card. Regards Ben -- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#391933: Fix available
The problem seems result from libqt4 4.2, which requires additional packages as build dependencies. Adding libsqlite0-dev libglib2.0-dev results in the package being build fine again. I am not sure if those dependencies should be pulled in automatically by libqt4-dev but due to the release of etch at the doorstep I am going to upload a fixed version of packagesearch. We can figure out blame later ;-) Best regards, Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#391933: packagesearch - FTBFS: cannot find -lsqlite
Hello, attached you find a bug report about a linker error that occured when building packagesearch. This build error surfaced only recently (and happens also on i386 and probably all other architectures) and occurs only on systems with an up to date set of packages. A diff of a successful and a non-successful buildlog showed, that the most notable differences, which seemed related to the bug report, were in using the latest QT4 and libmysqlclient15 packages: QT 4.1.4 (worked) vs. QT 4.2 libraries (failed) and libmysqlclient15 5.0.24a-7 (worked) vs. libmysqlclient15 5.0.24a-9 (failed) since there was nothing mentioned in a NEWS file, I suspect, that there was an error introduces in one of those packages. If the bug is caused by a bad/missing dependency in packagesearch please let me know. Note that I am using qmake for building my package. The full bug log can be found at http://bugs.debian.org/391933 Please respond as soon as possible, since I will be gone soon and the freeze of etch is at the doorstep. I have attached the successfull and not-successful builddlogs for packagesearch on s390. Thanks, Benjamin On Mon, 2006-10-09 at 15:56 +0200, Bastian Blank wrote: > Package: packagesearch > Version: 2.1.1-0.1 > Severity: serious > > There was an error while trying to autobuild your package: > > > Automatic build of packagesearch_2.1.1-0.1 on debian-31 by sbuild/s390 85 > [...] > > /usr/bin/moc-qt4 -DQT_NO_DEBUG -DQT_QT3SUPPORT_LIB -DQT3_SUPPORT > > -DQT_XML_LIB -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED > > -I/usr/share/qt4/mkspecs/linux-g++ -I. -I/usr/include/qt4/QtCore > > -I/usr/include/qt4/QtCore -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtGui > > -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtXml > > -I/usr/include/qt4/Qt3Support -I/usr/include/qt4/Qt3Support > > -I/usr/include/qt4 -I. -I.moc -I.ui runcommandwidget.h -o > > .moc/moc_runcommandwidget.cpp > > g++ -c -pipe -O2 `pkg-config --cflags libapt-front libtagcoll` -D_REENTRANT > > -Wall -W -DQT_NO_DEBUG -DQT_QT3SUPPORT_LIB -DQT3_SUPPORT -DQT_XML_LIB > > -DQT_GUI_LIB -DQT_CORE_LIB -DQT_SHARED -I/usr/share/qt4/mkspecs/linux-g++ > > -I. -I/usr/include/qt4/QtCore -I/usr/include/qt4/QtCore > > -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtXml > > -I/usr/include/qt4/QtXml -I/usr/include/qt4/Qt3Support > > -I/usr/include/qt4/Qt3Support -I/usr/include/qt4 -I. -I.moc -I.ui -o > > .obj/moc_runcommandwidget.o .moc/moc_runcommandwidget.cpp > > g++ -Wl,-export-dynamic -o packagesearch .obj/main.o > > .obj/packagesearchimpl.o .obj/history.o .obj/runcommand.o > > .obj/runcommandinxterm.o .obj/extalgorithm.o .obj/applicationfactory.o > > .obj/exception.o .obj/plugincontainer.o .obj/plugin.o .obj/singleton.o > > .obj/runcommandinwindow.o .obj/runcommandforoutput.o .obj/xmldata.o > > .obj/pluginmanager.o .obj/pluginlistitem.o .obj/pluginsettingsdlg.o > > .obj/plugininformer.o .obj/baseplugincontainer.o > > .obj/packagenotfoundexception.o .obj/packagelistviewitem.o > > .obj/packagenameplugin.o .obj/progressdisplaydlg.o > > .obj/customizablelistview.o .obj/processcontainer.o > > .obj/scoredisplayplugin.o .obj/scoreplugin.o > > .obj/scorecalculationstrategybase.o .obj/columncontroldlg.o > > .obj/runcommandwidget.o .obj/action.o .obj/actionplugin.o > > .obj/packagesearchaboutdlg.o .obj/moc_packagesearchimpl.o > > .obj/moc_runcommand.o .obj/moc_runcommandinxterm.o .obj/moc_searchplugin.o > > .obj/moc_runcommandinwindow.o .obj/moc_runcommandforoutput.o > > .obj/moc_pluginmanager.o .obj/moc_pluginlistitem.o > > .obj/moc_pluginsettingsdlg.o .obj/moc_progressdisplaydlg.o > > .obj/moc_customizablelistview.o .obj/moc_processcontainer.o > > .obj/moc_columncontroldlg.o .obj/moc_runcommandwidget.o-L/usr/lib > > -lstdc++ `pkg-config --libs libapt-front libtagcoll` -lrt -lQt3Support > > -L/build/buildd/qt4-x11-4.2.0/lib -lQtSql -L/usr/lib -L/usr/lib/mysql -lpq > > -lmysqlclient_r -lsqlite -L/usr/X11R6/lib -lQtNetwork -lQtXml -lQtGui > > -laudio -lXt -lpng -lSM -lICE -lXrender -lXrandr -lXfixes -lXcursor > > -lXinerama -lfreetype -lXext -lX11 -lQtCore -lfontconfig -lz -lm -lglib-2.0 > > -lpthread -ldl > > /usr/bin/ld: cannot find -lsqlite > > collect2: ld returned 1 exit status > > make[2]: *** [packagesearch] Error 1 > > make[2]: Leaving directory `/build/buildd/packagesearch-2.1.1/src' > > make[1]: *** [all] Error 2 > > make[1]: Leaving directory `/build/buildd/packagesearch-2.1.1' > > make: *** [build-stamp] Error 2 > > ** > > Build finished at 20061009-0946 > > FAILED [dpkg-buildpackage died] > > All the other arches don't try to link libsqlite directly, so this may a > problems with a dependency. > > Bastian > fail-log-packagesearch_2.1.1-0.1_s390-Oct9-09_47.html.gz Description: GNU Zip compressed data success-log-packagesearch_2.1.1-0.1_s390-Oct6-16_55.html.gz Description: GNU Zip compressed data
Bug#391468: xatitv: fails to start with: "GATOS: gatos_inita(): Invalid argument"
Package: gatos Version: 0.0.5-16 Severity: grave Justification: renders package unusable When trying to launch xatitv I get the following error message: > xatitv GATOS: No ATI PCI/AGP Cards ? GATOS: gatos_inita(): Invalid argument xatitv: gatos_init(): Invalid argument and the program finishes, no UI is diplayed. atitv gives the same: > atitv snap test.ppm GATOS: No ATI PCI/AGP Cards ? GATOS: gatos_inita(): Invalid argument Segmentation fault I have a Radeon QD AIW with 64 MB RAM (I think): --- lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R100 QD [Radeon 7200] (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc Radeon AIW Flags: bus master, stepping, 66MHz, medium devsel, latency 32, IRQ 5 Memory at d800 (32-bit, prefetchable) [size=128M] I/O ports at c000 [size=256] Memory at e100 (32-bit, non-prefetchable) [size=512K] [virtual] Expansion ROM at e000 [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Capabilities: [50] Power Management version 2 -- --- xorg.conf: Section "Module" Load "dbe" Load "type1" Load "freetype" Load "extmod" Load "fbdevhw" Load "record" Load "glx" Load "dri" # Load "v4l" EndSection Section "Device" BoardName"Radeon QD" # BusID"1:0:0" Driver "radeon" Identifier "Device[0]" Screen 0 VendorName "ATI" Option "AGPMode" "4" VideoRam15520 # this was probably added by gatos-conf EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" Option "Clone" "off" Option "Xinerama" "off" Screen "Screen[0]" EndSection Section "DRI" Group "video" Mode 0666 EndSection -- --- modprobe -l |grep video: /lib/modules/2.6.18/kernel/drivers/video/cfbfillrect.ko /lib/modules/2.6.18/kernel/drivers/video/cfbimgblt.ko /lib/modules/2.6.18/kernel/drivers/video/fb.ko /lib/modules/2.6.18/kernel/drivers/video/cfbcopyarea.ko /lib/modules/2.6.18/kernel/drivers/video/aty/radeonfb.ko /lib/modules/2.6.18/kernel/drivers/acpi/video.ko -- --- modprobe -l |grep i2c: /lib/modules/2.6.18/kernel/drivers/i2c/i2c-core.ko /lib/modules/2.6.18/kernel/drivers/i2c/algos/i2c-algo-bit.ko /lib/modules/2.6.18/kernel/drivers/i2c/i2c-dev.ko -- --- dpkg -l xserver-xorg-video-ati Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-=-=-== ii xserver-xorg-video-at 6.6.2-1 X.Org X server -- ATI display driver -- If you need addtional information, please let me know. Best regards Ben -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18 Locale: LANG=en_GB.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8) Versions of packages gatos depends on: ii libc62.3.6.ds1-4 GNU C Library: Shared libraries ii libgatos00.0.5-16The General ATI TV and Overlay Sof ii libgcc1 1:4.1.1-13 GCC support library ii libibtk0 0.0.14-11 Insomnia's Basic ToolKit ii libjpeg-progs6b-13 Programs for manipulating JPEG fil ii libstdc++6 4.1.1-13The GNU Standard C++ Library v3 ii libx11-6 2:1.0.0-9 X11 client-side library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxxf86dga1 2:1.0.0-3 X11 Direct Graphics Access extensi ii libxxf86vm1 1:1.0.0-4 X11 XFree86 video mode extension l ii netpbm 2:10.0-10.1 Graphics conversion tools gatos recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#389150: Fix will be uploaded soon
Hello, the bug resulted from my misinterpretation about build-depend-indep. It will be fixed soon. The upload will be prepared as soon as libept-dev hits the archive. Best regards Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#357355: Processed: Fixed in NMU of packagesearch 2.0.6-0.1
Apologies, the icons didn't break with your upload. I've found the cause for the icon breakage to be in cvs2svn transition performed for packagesearch, which causes every new checkout to have broken icons. Regards, Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#357355: Processed: Fixed in NMU of packagesearch 2.0.6-0.1
Hello > > tag 357355 + fixed > Bug#357355: FTBS: fails to build for current unstable (duplicate template > instantiation) > Tags were: patch > Bug#360553: packagesearch_2.0.6(amd64/unstable): FTBFS: duplicate explicit > instantiation of 'class Tagcoll::OpSet' > Tags added: fixed You might have contacted me before doing the NMU, especially since I mentioned in the buglog, that I have a fix pending. With your upload the icons are broken, which is due to a QT bug (#358972) wich I am waiting to be fixed at one point. Now that I think about it, it is better to have the RC bug fixed, even by introducing a new bug. But had you told me so, I could have performed the upload on my own. Anyways, thanks for caring for the bug. Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#361995: Issue not fixed
> I found out how to reproduce this now. The fix is in the "local > addressbook" plugin. Enable that and it works. Confirmed, installing evolution-plugins fixed the problem. Thanks for the help and good luck, Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#361995: Issue not fixed
Hello > ons, 03,.05.2006 kl. 16.10 +0200, skrev Benjamin Mesing: > > I cannot confirm that the issue is fixed. > > > > I've tried to create a new address book today, and encountered the same > > problem of only creating an alias for the last existing one. Deleting > > the alias, also deleted the content for the original address book. > > > > Is the fix supposed to work only for clean installations (i.e. those > > that did not encounter those problem before)? > > I'm not sure if it was supposed to work for clean installations or not. > We can try to find out. I've tried it with a pristine user - same problem. So the bug should be easy to reproduce. Just launch evolution and create two additional address books, the second will be an alias to the first. > Just to be sure, can you paste the content of the output file after > "dpkg -l "evolution*" > installed-evolution-pkgs"? [EMAIL PROTECTED]:~> dpkg -l "evolution*" Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++---= ii evolution2.6.1-1 The groupware suite ii evolution-data-server1.6.1-1 evolution database backend server pn evolution-data-server1.2(no description available) un evolution-dbg (no description available) un evolution-exchange (no description available) un evolution-plugins (no description available) un evolution-ssl (no description available) > Also, make sure > you've restarted evolution-data-server since upgrade (either restart or > do "evolution --force-shutdown" and check that all e-d-s-processes are > stopped). System was shutdown in between. > Can you also provide the output of > "gconftool -a /apps/evolution/addressbook"? You can send it to me in > private if you don't want it posted. [EMAIL PROTECTED]:~> gconftool -a /apps/evolution/addressbook sources = [ , ldap://"; readonly="no"/> The two address books test2 and test3 refer to the same address book. Thanks for investigating, Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#361995: Issue not fixed
reopen 361995 thanks I cannot confirm that the issue is fixed. I've tried to create a new address book today, and encountered the same problem of only creating an alias for the last existing one. Deleting the alias, also deleted the content for the original address book. Is the fix supposed to work only for clean installations (i.e. those that did not encounter those problem before)? Best regards Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#365797: evolution is using lots of CPU
Hello, > About the .xsession-errors problem, that's a bit weird. My error file > always stops growing at 200KiB. ~ > ll .xsession-errors -rw--- 1 xxx users 308919562 2006-05-03 14:33 .xsession-errors ~ > ll .xsession-errors -rw--- 1 xxx users 322823058 2006-05-03 14:33 .xsession-errors ~ > ll .xsession-errors -rw--- 1 xxx users 325404026 2006-05-03 14:33 .xsession-errors ~ > ll .xsession-errors -rw--- 1 xxx users 342011496 2006-05-03 14:33 .xsession-errors I can prevent it by launching evolution from commandline, since errors go to the console then. I have no dbus installed. Ok, installing dbus instantaneously settled the whole issue. Thanks for the quick reply, Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#365022: Additional information
Perhaps I should provide some additional information. I executed the following apt-get command that led to the error: [EMAIL PROTECTED] $ apt-get install libqt4-dev xserver-xorg Reading package lists... Done Building dependency tree... Done The following extra packages will be installed: libdrm2 libfontenc1 libqt4-core libqt4-debug libqt4-debug-dev libqt4-gui libqt4-qt3support libqt4-sql libxfont1 libxft-dev libxft2 lmodern x11-common x11proto-core-dev xbase-clients xfonts-100dpi xfonts-100dpi-transcoded xfonts-75dpi xfonts-base xfonts-encodings xfonts-scalable xfonts-utils xkb-data xserver-xorg-core xserver-xorg-input-kbd xserver-xorg-input-mouse xserver-xorg-video-neomagic xserver-xorg-video-siliconmotion xserver-xorg-video-voodoo Suggested packages: mesa-utils xfs xserver libglide2 Recommended packages: laptop-detect xresprobe mdetect discover xkeyboard-config The following packages will be REMOVED euro-support-x gsfonts-x11 msttcorefonts x-window-system-core xfonts-base-transcoded xfonts-efont-unicode xfonts-efont-unicode-ib xfree86-common xserver-common xutils The following NEW packages will be installed libdrm2 libfontenc1 libxfont1 x11proto-core-dev xfonts-encodings xfonts-utils xkb-data xserver-xorg-core xserver-xorg-input-kbd xserver-xorg-input-mouse xserver-xorg-video-neomagic xserver-xorg-video-siliconmotion xserver-xorg-video-voodoo The following packages will be upgraded: libqt4-core libqt4-debug libqt4-debug-dev libqt4-dev libqt4-gui libqt4-qt3support libqt4-sql libxft-dev libxft2 lmodern x11-common xbase-clients xfonts-100dpi xfonts-100dpi-transcoded xfonts-75dpi xfonts-base xfonts-scalable xserver-xorg 18 upgraded, 13 newly installed, 10 to remove and 772 not upgraded. I've worked around this issue with dpkg -i --force-overwrite xserver-xorg-core_1%3a1.0.2-7_i386.deb for now. Best regards Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#365022: file /etc/X11/xinit/xserverrc available in both xserver-xorg-core and xbase-clients
Package: xserver-xorg-core Severity: grave X-Debbugs-Cc: [EMAIL PROTECTED] When updating xserver-xorg-core I get the following error. Preconfiguring packages ... (Reading database ... 128943 files and directories currently installed.) Unpacking xserver-xorg-core (from .../xserver-xorg-core_1% 3a1.0.2-7_i386.deb) ... dpkg: error processing /var/cache/apt/archives/xserver-xorg-core_1% 3a1.0.2-7_i386.deb (--unpac trying to overwrite `/etc/X11/xinit/xserverrc', which is also in package xbase-clients Errors were encountered while processing: /var/cache/apt/archives/xserver-xorg-core_1%3a1.0.2-7_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) Best regards Ben -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15.6 Locale: LANG=en_GB.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#361995: evolution: Creating new address book creates only an alias, but deleting deletes the original folder
Package: evolution Version: 2.4.2.1-2 Severity: critical Justification: causes serious data loss X-Debbugs-Cc: [EMAIL PROTECTED] When I create a new address book, this only creates an alias to an exisiting one (the last in the list of those available - but tried only once). Deleting this new (alias) addressbook, however, does also delete the real data behind it. Trying to access the original folder result in the following error message: We were unable to open this addressbook. Please check that the path /.evolution/addressbook/local exists and that you have permission to access it. Steps to reproduce: new -> addressbook delete the new addressbook the content of the aliased folder will be lost Best regads Ben -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15.6 Locale: LANG=en_GB.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8) Versions of packages evolution depends on: ii evolution-data-serve 1.4.2.1-2 evolution database backend server ii gconf2 2.14.0-1GNOME configuration database syste ii gnome-icon-theme 2.8.0-4 GNOME Desktop icon theme ii gtkhtml3.8 3.8.1-1.1 HTML rendering/editing library - b ii libart-2.0-2 2.3.17-1Library of functions for 2D graphi ii libatk1.0-0 1.10.1-2The ATK accessibility toolkit ii libaudiofile00.2.6-6 Open-source version of SGI's audio ii libavahi-client3 0.6.4-2 Avahi client library ii libavahi-common3 0.6.9-6 Avahi common library ii libavahi-compat-howl 0.6.9-6 Avahi Howl compatibility library ii libavahi-glib1 0.6.9-6 Avahi glib integration library ii libbonobo2-0 2.14.0-1Bonobo CORBA interfaces library ii libbonoboui2-0 2.8.1-2 The Bonobo UI library ii libc62.3.6-4 GNU C Library: Shared libraries an ii libcairo21.0.2-3 The Cairo 2D vector graphics libra ii libcamel1.2-61.4.2.1-1 The Evolution MIME message handlin ii libcomerr2 1.37-2 common error description library ii libdb4.2 4.2.52-18 Berkeley v4.2 Database Libraries [ ii libdbus-1-2 0.61-5 simple interprocess messaging syst ii libebook1.2-51.4.2.1-1 Client library for evolution addre ii libecal1.2-3 1.4.2.1-1 Client library for evolution calen ii libedataserver1.2-4 1.4.2.1-1 Utility library for evolution data ii libedataserverui1.2- 1.4.2.1-1 GUI utility library for evolution ii libesd-alsa0 [libesd 0.2.35-2Enlightened Sound Daemon (ALSA) - ii libfontconfig1 2.3.1-2 generic font configuration library ii libfreetype6 2.1.10-1FreeType 2 font engine, shared lib ii libgail-common 1.8.3-1 GNOME Accessibility Implementation ii libgail171.8.3-1 GNOME Accessibility Implementation ii libgconf2-4 2.14.0-1GNOME configuration database syste ii libgcrypt11 1.2.2-1 LGPL Crypto library - runtime libr ii libglade2-0 1:2.5.1-2 library to load .glade files at ru ii libglib2.0-0 2.10.1-2The GLib library of C routines ii libgnome-keyring00.4.3-1 GNOME keyring services library ii libgnome-pilot2 2.0.12-1.2 Support libraries for gnome-pilot ii libgnome2-0 2.8.1-2 The GNOME 2 library - runtime file ii libgnomecanvas2-02.12.0-1A powerful object-oriented display ii libgnomeprint2.2-0 2.12.1-2The GNOME 2.2 print architecture - ii libgnomeprintui2.2-0 2.12.1-1GNOME 2.2 print architecture User ii libgnomeui-0 2.8.1-3 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.14.0-1GNOME virtual file-system (runtime ii libgnutls11 1.0.16-14 GNU TLS library - runtime library ii libgpg-error01.2-1 library for common error values an ii libgtk2.0-0 2.8.9-2 The GTK+ graphical user interface ii libgtkhtml3.8-15 3.8.1-1.1 HTML rendering/editing library - r ii libice6 4.3.0.dfsg.1-12.0.1 Inter-Client Exchange library ii libjpeg626b-10 The Independent JPEG Group's JPEG ii libkrb53 1.4.3-4 MIT Kerberos runtime libraries ii libldap2 2.1.30-6OpenLDAP libraries ii libnspr4 2:1.7.12-1.1Netscape Portable Runtime Library ii libnss3 2:1.7.12-1.1Network Security Service Libraries ii liborbit21:2.1
Bug#343788: Fix Pending
I have a fixed upload pending. However, due to a lingering libapt-front update, it is not yet uploaded. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#324032: packagesearch: FTBFS: Links a shared lib against a static non-PIC lib.
Version: 2.0.2 Thanks for the report. This issue is fixed in 2.0.2 which depends on libapt-front now. libaot-front provides PIC compatability by default (and so does libtagcoll now). Best regards Benjamin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#324032: Bug still open - but will be fixed soon
This bug is still open, because the -pic versions of libdebtags and libtagcoll where drop recently. Their maintainers made the wrong assumption, that this it is only a performance issue. This bug will hopefully be fixed with the next upload of packagesearch, which will be linked against libtagcoll and libapt-front. Benjamin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#324032: packagesearch: Patch
Thanks for the patch, I've just uploaded a new version (2.0) containing this fix. Best regards Benjamin -- GMX DSL = Maximale Leistung zum minimalen Preis! 2000 MB nur 2,99, Flatrate ab 4,99 Euro/Monat: http://www.gmx.net/de/go/dsl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#323939: Correction
QT isn't the bottleneck anymore. But to install the latest version, alot of dependend packages have to be removed. I will wait for the other packages to be updated. Perhaps its time to take a look at chroot... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#323939: packagesearch: bug #316628 not fixed - package uninstallable in sid
Thanks for the report. Well, #316628 was fixed. But apt seems to be changing its ABI at a daily basis (its another version of apt that is currently missing) :-( Currently I can't do anything about this, because QT3 is not yet compiled with the GCC4, resulting in a crash when recompiling against the latest apt :-( However I plan to finish QT4 migration within the next 2-3 weeks, and reupload the stuff working. Greetings Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#310528: cupsys: postinstall fails
> I checked all versions since I added /etc/default/cupsys feature, but > I couldn't find any problem. > cupsys package (and packages are created from cupsys source) hasn't > created /etc/default/cupsys DIRECTORY yet. > > If you has a record of 'ls -ld /etc/default/cupsys', it may provides me > something. (but looks too late...) > , Sorry, no additional information available. If you can't reproduce the bug, it seems I did create the directory this manually - though I can't imagine why... Thanks for investigation. Greetings Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#310528: cupsys: postinstall fails
Package: cupsys Version: 1.1.23-10 Severity: grave Justification: renders package unusable When installing cupsys I got the following error message: /var/lib/dpkg/info/cupsys.postinst: line 30: .: /etc/default/cupsys: is a directory dpkg: error processing cupsys (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: cupsys E: Sub-process /usr/bin/dpkg returned an error code (1) As I can't remeber creating this directory manually, I think it is a problem with the postinstall script. I was able to solve the problem by manually deleting the directory before (which was empty). Greetings Ben -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.7 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) (ignored: LC_ALL set to [EMAIL PROTECTED]) Versions of packages cupsys depends on: ii adduser 3.63 Add and remove users and groups ii debconf 1.4.47 Debian configuration management sy ii libc6 2.3.2.ds1-21 GNU C Library: Shared libraries an ii libcupsimage2 1.1.23-7 Common UNIX Printing System(tm) - ii libcupsys2-gnutls10 1.1.23-7 Common UNIX Printing System(tm) - ii libgnutls11 1.0.16-13GNU TLS library - runtime library ii libpam0g0.76-22 Pluggable Authentication Modules l ii libpaper1 1.1.14-3 Library for handling paper charact ii libslp1 1.0.11a-2OpenSLP libraries ii patch 2.5.9-2 Apply a diff file to an original ii perl-modules5.8.4-8 Core Perl modules ii xpdf-utils 3.00-13 Portable Document Format (PDF) sui ii zlib1g 1:1.2.2-4compression library - runtime -- debconf information: * cupsys/raw-print: false * cupsys/backend: ipp, lpd, parallel, socket, usb -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#296433: umbrello bug news
Hello, > Is there any news on this bug [0]? Its not clear from the bug log > that its even present in a version distributed by Debian. Sorry, no email informing me about additional information for this bug was send to me, else I would have responded. Your mail was the first one informing me about news. > (Most importantly: is it present in testing?) The bug can be reproduced with the document at http://www.mesing.de/benjamin/searchplugin.xmi dragging the class SettingsControl (and also other classes if you like) into the package NPlugin (Don't drag the interfaces because this will often hang Umbrello...). You will see that the package is gone from the default package and is not in the NPlugin package. After this save the file and reopen it - the classes which disappeared will not be present in the class view any more. I did also downgrade to the testing package, and was able to reproduce the bug (though I had to move more than one package - because the first did not disappear). Btw. is there a way to downgrade using apt? I tried "apt-get install -t testing umbrello" but this was refused because the package was "already at the newest version". > Ben, were you using a debian version of the package when you > experienced the bug, or one from CVS? No, I use the Debian unstable version - I would not have dared to file a bug else. (The mention of CVS in my origrinal report referred to me having the document with the data loss in a CVS archive so I could restore it.) Greetings Ben ~> umbrello --version Qt: 3.3.3 KDE: 3.3.2 Umbrello UML Modeller: 1.3.2 ~> apt-cache show umbrello Package: umbrello Priority: optional Section: devel Installed-Size: 4332 Maintainer: Ben Burton <[EMAIL PROTECTED]> Architecture: i386 Source: kdesdk Version: 4:3.3.2-1 Replaces: umbrello-manual (<< 20040311) Depends: kdelibs4 (>= 4:3.3.2-1), libart-2.0-2 (>= 2.3.16), libc6 (>= 2.3.2.ds1-4), libfam0c102, libgcc1 (>= 1:3.4.1-3), libice6 | xlibs (>> 4.1.0), libidn11 (>= 0.5.2), libpng12-0 (>= 1.2.8rel), libqt3c102-mt (>= 3:3.3.3), libsm6 | xlibs (>> 4.1.0), libstdc++5 (>= 1:3.3.4-1), libx11-6 | xlibs (>> 4.1.0), libxext6 | xlibs (>> 4.1.0), libxrender1, zlib1g (>= 1:1.2.1) Suggests: khelpcenter, kdesdk-doc-html Conflicts: umbrello-manual (<< 20040311) Filename: pool/main/k/kdesdk/umbrello_3.3.2-1_i386.deb Size: 1656668 MD5sum: 821a9bdb04b20faa42206b0966f9a16f Description: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#296433: umbrello bug news
Ahh.., and btw. there are two Ben's involved in the communication about this bug (Ben Burton and Benjamin Mesing (me)) - so be carefull not to confuse us :-) Greetings Ben -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#296433: umbrello: classes completely disappearing when moved into packages
Package: umbrello Version: 4:3.3.2-1 Severity: critical Justification: causes serious data loss I have a fairly complex class diagram (around 30 classes ). If I move classes into packages using the logical view and drag'n drop, some of the classes do completely dissapear when dropped into a package. This does not become immideately obvious when looking at the class diagram where they are still displayed, but they are removed from the logical view. After saving and loading the file the classes are also removed from the class diagram so they are completly gone. The classes which are correctly added to the package and which go to /dev/null seem to be random, I can't find a pattern. Additionally moving Interfaces into a package often hangs the application. Fortunatelly I use CVS! Greetings Ben -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.7 Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) (ignored: LC_ALL set to [EMAIL PROTECTED]) Versions of packages umbrello depends on: ii kdelibs4 4:3.3.2-1 KDE core libraries ii libart-2.0-2 2.3.16-6Library of functions for 2D graphi ii libc62.3.2.ds1-20GNU C Library: Shared libraries an ii libfam0c102 2.7.0-6 client library to control the FAM ii libgcc1 1:3.4.3-6 GCC support library ii libice6 4.3.0.dfsg.1-10 Inter-Client Exchange library ii libidn11 0.5.2-3 GNU libidn library, implementation ii libpng12-0 1.2.8rel-1 PNG library - runtime ii libqt3c102-mt3:3.3.3-7 Qt GUI Library (Threaded runtime v ii libsm6 4.3.0.dfsg.1-10 X Window System Session Management ii libstdc++5 1:3.3.5-6 The GNU Standard C++ Library v3 ii libx11-6 4.3.0.dfsg.1-10 X Window System protocol client li ii libxext6 4.3.0.dfsg.1-10 X Window System miscellaneous exte ii libxrender1 0.8.3-7 X Rendering Extension client libra ii xlibs4.3.0.dfsg.1-10 X Keyboard Extension (XKB) configu ii zlib1g 1:1.2.2-4 compression library - runtime -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
