Bug#732939: Re: Bug#732939: linux-image-3.11-2-686-pae: Data corruption with ASMedia ASM1061 SATA IDE Controller in AHCI-Mode
Sorry i just looked this up. I already replied to Ben but not to the bug. For now i can say that after a few weeks (5-10) one disk failed in the array. Maybe this caused the curruption? SMART did not warn me anyway. Heres what i wrote to Ben: Hey Ben, Sorry for the late answer. Did the kernel log any I/O error messages (not from ext4) while writing through the ASRock controller in AHCI mode? No there was nothing that warned me about the problem Do you have a single hard drive connected to each port or are you using a port multiplier? No multiplier in use. Now some thoughts about what happend: I was not able to recover the data. Fsck just went out of performance. It fixed 235M inodes of 450M and then i was only able to fix 1M inodes in 24h which was not worth the time so i stopped recovering and created a new filesystem. The problem seams to be gone and i cannot say why because i did various things. Its most likely that a bios update fixed it which would make this problem firmware related and not kernel related. Please close this bug its seams theres no problem with kernel. Maybe its fixed by updating the bios. I am not sure. Asmedia is running with AHCI enabled now and no more corruption. Kind regards, Daniel -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#732939: linux-image-3.11-2-686-pae: Data corruption with ASMedia ASM1061 SATA IDE Controller in AHCI-Mode
Package: src:linux Version: 3.11.10-1 Severity: critical Justification: causes serious data loss Dear Maintainer, As mentioned here http://www.linuxquestions.org/questions/linux-hardware-18/hard-drive-corruption-with-asm1062-sata-controller-4175469744/ by somebody else using the ASMedia in AHCI-Mode causes serious data corruption. Almost every mainboard should be configured using AHCI by default which makes this bug critical. I am currently facing this bug on my own. I replaced the mainboard in my NAS with an ASRock Z77 Pro4-M which has two SATA Ports using the asm1060 controller and was configured to use AHCI by the manufacture. After replacing the device i booted the system and everything looked fine. Some hours later i noticed the data corruption on the ext4-filesystem and i had to run fscks which took very long. The linux-raid device stores 12 TB and the system has 4 GB RAM which caused fsck to stop with cannot allocate memory so i had to started it again and again. I noticed that fsck was fixing the same inodes several timesy. After finding the threat on linuxquestions.org i set ACHI to IDE and fsck is now going forward and stopped to fix the same inodes again and again which makes me belive that the corruption has stopped. Also i wrote files with the same content and created sha1sums of them which do match . I dont want to check if the would differ when using AHCI. Here are some actions fsck is doing right now: Inode 9943178, i_size is 11096869482525051813, should be 0. Fix? yes Inode 9943178, i_blocks is 196842723066601, should be 0. Fix? yes Inode 9943179 is in use, but has dtime set. Fix? yes Inode 9943179 has imagic flag set. Clear? yes Inode 9943179 has a extra size (26461) which is invalid Fix? yes Inode 9943179 has a bad extended attribute block 591467076. Clear? yes Inode 9943179 has INDEX_FL flag set but is not a directory. Clear HTree index? yes Inode 9943179, i_size is 10152020167559741440, should be 0. Fix? yes Inode 9943179, i_blocks is 171648422719524, should be 0. Fix? yes Inode 9943180 is in use, but has dtime set. Fix? yes Inode 9943180 has imagic flag set. Clear? yes Inode 9943180 has a extra size (44153) which is invalid Fix? yes Inode 9943180 has a bad extended attribute block 1308992673. Clear? yes Inode 9943180, i_size is 2358728759865762938, should be 0. Fix? yes Inode 9943180, i_blocks is 119552820074414, should be 0. Fix? yes Inode 9943181 is in use, but has dtime set. Fix? yes Inode 9943181 has imagic flag set. Clear? yes Inode 9943181 has a extra size (40687) which is invalid -- Package-specific info: ** Version: Linux version 3.11-2-686-pae (debian-ker...@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-7) ) #1 SMP Debian 3.11.10-1 (2013-12-04) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.11-2-686-pae root=UUID=7a0defcb-ccf7-4bb4-91f1-74367d60c8be ro quiet pcie_aspm=force i915.i915_enable_fbc i915.lvds_downclock=1 ** Not tainted ** Kernel log: [17355.225214] EXT4-fs error (device md0): ext4_iget:4242: inode #81202494: comm smbd: bogus i_mode (151012) [17355.227106] EXT4-fs error (device md0): ext4_iget:4242: inode #81202387: comm smbd: bogus i_mode (57634) [17355.229019] EXT4-fs error (device md0): ext4_iget:4242: inode #81202560: comm smbd: bogus i_mode (162442) [17355.231272] EXT4-fs error (device md0): ext4_iget:4242: inode #81202493: comm smbd: bogus i_mode (166744) [17355.233222] EXT4-fs error (device md0): ext4_lookup:1437: inode #81215504: comm smbd: deleted inode referenced: 81202458 [17355.235122] EXT4-fs error (device md0): ext4_iget:4242: inode #81202610: comm smbd: bogus i_mode (130313) [17355.237065] EXT4-fs error (device md0): ext4_iget:4193: inode #81202415: comm smbd: bad extended attribute block 4049073417 [17355.239033] EXT4-fs error (device md0): ext4_iget:4242: inode #81202592: comm smbd: bogus i_mode (164142) [17355.241393] EXT4-fs error (device md0): ext4_lookup:1437: inode #81215504: comm smbd: deleted inode referenced: 81202471 [17355.243340] EXT4-fs error (device md0): ext4_iget:4242: inode #81202672: comm smbd: bogus i_mode (173123) [17355.245372] EXT4-fs error (device md0): ext4_iget:4242: inode #81202462: comm smbd: bogus i_mode (52117) [17355.247307] EXT4-fs error (device md0): ext4_lookup:1437: inode #81215504: comm smbd: deleted inode referenced: 81202406 [17355.249313] EXT4-fs error (device md0): ext4_iget:4193: inode #81202362: comm smbd: bad extended attribute block 4294967119 [17355.251482] EXT4-fs error (device md0): ext4_lookup:1437: inode #81215504: comm smbd: deleted inode referenced: 81202521 [17355.253523] EXT4-fs error (device md0): ext4_iget:4242: inode #81202618: comm smbd: bogus i_mode (132201) [17355.255537] EXT4-fs error (device md0): ext4_iget:4193: inode #81202586: comm smbd: bad extended attribute block 3518414528 [17355.257609] EXT4-fs error (device md0): ext4_lookup:1437: inode #81215504: comm smbd: deleted inode referenced: 81202379
Bug#669918: Fixed?
I guess my problem is fixed. I am not able anymore to reproduce that bug on my system using kmail Version: 4:4.4.11.1+l10n-3+b1 --- Daniel Koch GPG: 83DE 2C48 5A9F 9992 843A 0EAD 3B2D 7E8F 13F4 9C39 -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#680586: Acknowledgement (pm-utils: HP 625 fails to wake up from suspend)
I have figured out that the wake up only fails if i have pluged my external screen via HDMI to the laptop. I am using the radeon drivers. --- Daniel Koch GPG: 83DE 2C48 5A9F 9992 843A 0EAD 3B2D 7E8F 13F4 9C39 signature.asc Description: This is a digitally signed message part.
Bug#680586: pm-utils: HP 625 fails to wake up from suspend
I have noticed that this does not happen if i am on the go with the notebook. I will perform some more analystics on what interface or pluged cable may cause this problem. dk Am Samstag, 7. Juli 2012, 03:03:23 schrieben Sie: Package: pm-utils Version: 1.4.1-9 Severity: critical Justification: causes serious data loss I am using a HP 625 and it fails to wake up from pm-suspend. This was working some time ago but it stoped ( i think it was when fglrx was remove from wheezy and i had to replace it with radeon). After trying to wake the system from suspend again all i can see is a black screen. I am not able to change the tty or reset X. All i can perform is an cold restart. -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (1010, 'testing'), (500, 'testing-proposed-updates') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages pm-utils depends on: ii powermgmt-base 1.31 Versions of packages pm-utils recommends: ii hdparm 9.39-1+b1 ii kbd 1.15.3-9 ii procps 1:3.3.3-2 ii vbetool 1.1-2 Versions of packages pm-utils suggests: ii cpufrequtils008-1 pn ethtool none ii radeontool 1.6.2-1.1 ii wireless-tools 30~pre9-8 -- debconf-show failed --- Daniel Koch GPG: 83DE 2C48 5A9F 9992 843A 0EAD 3B2D 7E8F 13F4 9C39 signature.asc Description: This is a digitally signed message part.
Bug#680586: pm-utils: HP 625 fails to wake up from suspend
Package: pm-utils Version: 1.4.1-9 Severity: critical Justification: causes serious data loss I am using a HP 625 and it fails to wake up from pm-suspend. This was working some time ago but it stoped ( i think it was when fglrx was remove from wheezy and i had to replace it with radeon). After trying to wake the system from suspend again all i can see is a black screen. I am not able to change the tty or reset X. All i can perform is an cold restart. -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (1010, 'testing'), (500, 'testing-proposed-updates') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages pm-utils depends on: ii powermgmt-base 1.31 Versions of packages pm-utils recommends: ii hdparm 9.39-1+b1 ii kbd 1.15.3-9 ii procps 1:3.3.3-2 ii vbetool 1.1-2 Versions of packages pm-utils suggests: ii cpufrequtils008-1 pn ethtool none ii radeontool 1.6.2-1.1 ii wireless-tools 30~pre9-8 -- debconf-show failed claw-hp625 description: Notebook product: HP 625 (XN836EA#ABD) vendor: Hewlett-Packard serial: 5CGSR4 width: 32 bits capabilities: smbios-2.6 dmi-2.6 configuration: boot=normal chassis=notebook family=103C_5336AN sku=XN836EA#ABD uuid=E2B569A0-C215-E011-B479-4404E402603E *-core description: Motherboard product: 1475 vendor: Hewlett-Packard physical id: 0 version: KBC Version 72.0E serial: Base Board Serial Number slot: Base Board Chassis Location *-firmware description: BIOS vendor: Hewlett-Packard physical id: 8 version: 68DVA Ver. F.06 date: 12/07/2010 size: 64KiB capacity: 1984KiB capabilities: pci pcmcia upgrade shadowing cdboot bootselect edd int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification netboot *-cpu description: CPU product: AMD Athlon(tm) II P360 Dual-Core Processor vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: cpu@0 version: 15.6.3 serial: NotSupport slot: Unknown size: 800MHz capacity: 2300MHz width: 64 bits clock: 200MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a 3dnowprefetch osvw ibs skinit wdt nodeid_msr npt lbrv svm_lock nrip_save cpufreq *-cache:0 description: L1 cache physical id: 1 slot: L1 Cache size: 128KiB capacity: 256KiB capabilities: pipeline-burst internal write-back unified *-cache:1 description: L2 cache physical id: 2 slot: L2 Cache size: 512KiB capacity: 1MiB capabilities: pipeline-burst internal write-back unified *-memory description: System Memory physical id: 3 slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM [empty] physical id: 0 slot: Top-Slot 1(top) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT351S6BFR8C-H9 vendor: Hynix physical id: 1 serial: 19C96DAB slot: Top-Slot 2(under) size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-generic UNCLAIMED description: Non-VGA unclassified device product: Gammagraphx, Inc. (or missing ID) vendor: Gammagraphx, Inc. (or missing ID) physical id: 2 bus info: pci@:00:00.0 version: 00 width: 32 bits clock: 33MHz configuration: latency=0 *-pci:0 description: PCI bridge product: Hewlett-Packard Company vendor: Hewlett-Packard Company physical id: 1 bus info: pci@:00:01.0 version: 00 width: 32 bits clock: 66MHz capabilities: pci ht normal_decode bus_master cap_list resources: ioport:5000(size=4096) memory:d420-d43f ioport:c000(size=268435456) *-display description: VGA compatible controller product: RS880M [Mobility Radeon HD 4200 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 5 bus info: pci@:01:05.0
Bug#669918: kmail crashes when sending an email
Package: kmail Version: 4:4.4.11.1+l10n-1 Severity: grave Tags: upstream Justification: renders package unusable Kmail crashes ( or more freezes) when hitting sent. +#kmail(5462) KMFolderImap::setImapPath: ignoring empty path kmail(5462) KMFolderImap::setImapPath: ignoring empty path kmail(5462)/kdeui (kdelibs): Attempt to use QAction with KXMLGUIFactory! kmail(5462)/kdeui (kdelibs): Attempt to use QAction with KXMLGUIFactory! Enchant dict for de 0x96c25b0 kmail(5462) KMFolderImap::setImapPath: ignoring empty path kmail(5462) KMFolderIndex::updateIndexStreamPtr: utime( /home/claw/.kde/share/apps/kmail/imap/.1712157522.directory/.debian- list.directory/.vote.index.ids , 0) failed (KMMsgDict::getFolderIdsLocation( *this )) kmail(5462) KMFolderIndex::updateIndexStreamPtr: utime( /home/claw/.kde/share/apps/kmail/imap/.1712157522.directory/.debian- list.directory/.vote.index.ids , 0) failed (KMMsgDict::getFolderIdsLocation( *this )) kmail(5462) KMFolderImap::setImapPath: ignoring empty path kmail(5462)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: QLocalSocket::connectToServer: Invalid name kmail(5462)/kio (KDirWatch) KDirWatchPrivate::removeEntry: doesn't know /home/claw/.kde/share/apps/kabc Enchant dict for de 0x98cb47 # THIS IS WHERE I HIT SENT I am able to read all my emails and i dont have any modifications made to kmail (also tried sending emails without pgp signature but did not solve the problem) The output is not really reliable so please tell me how to produce better output. Thanks for your help -- System Information: Debian Release: wheezy/sid APT prefers testing-proposed-updates APT policy: (500, 'testing-proposed-updates'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages kmail depends on: ii kdebase-runtime 4:4.7.4-2 ii kdepim-runtime 4:4.4.11.1-3 ii kdepimlibs-kio-plugins 4:4.7.4-2+b1 ii libakonadi-contact4 4:4.7.4-2+b1 ii libakonadi-kde4 4:4.7.4-2+b1 ii libc6 2.13-27 ii libgcc1 1:4.7.0-1 ii libgpgme++2 4:4.7.4-2+b1 ii libkabc44:4.7.4-2+b1 ii libkcal44:4.7.4-2+b1 ii libkcmutils44:4.7.4-4 ii libkde3support4 4:4.7.4-4 ii libkdecore5 4:4.7.4-4 ii libkdepim4 4:4.4.11.1+l10n-1 ii libkdeui5 4:4.7.4-4 ii libkhtml5 4:4.7.4-4 ii libkimap4 4:4.7.4-2+b1 ii libkio5 4:4.7.4-4 ii libkldap4 4:4.7.4-2+b1 ii libkleo44:4.4.11.1+l10n-1 ii libkmime4 4:4.7.4-2+b1 ii libknotifyconfig4 4:4.7.4-4 ii libkontactinterface44:4.7.4-2+b1 ii libkparts4 4:4.7.4-4 ii libkpgp44:4.4.11.1+l10n-1 ii libkpimidentities4 4:4.7.4-2+b1 ii libkpimtextedit44:4.7.4-2+b1 ii libkpimutils4 4:4.7.4-2+b1 ii libkresources4 4:4.7.4-2+b1 ii libksieve4 4:4.4.11.1+l10n-1 ii libktnef4 4:4.7.4-2+b1 ii libmailtransport4 4:4.7.4-2+b1 ii libmessagecore4 4:4.4.11.1+l10n-1 ii libmessagelist4 4:4.4.11.1+l10n-1 ii libmimelib4 4:4.4.11.1+l10n-1 ii libnepomuk4 4:4.7.4-4 ii libphonon4 4:4.6.0.0-1 ii libqt4-dbus 4:4.7.4-2 ii libqt4-network 4:4.7.4-2 ii libqt4-qt3support 4:4.7.4-2 ii libqt4-xml 4:4.7.4-2 ii libqtcore4 4:4.7.4-2 ii libqtgui4 4:4.7.4-2 ii libstdc++6 4.7.0-1 ii libthreadweaver44:4.7.4-4 ii perl5.14.2-9 ii phonon 4:4.6.0.0-1 Versions of packages kmail recommends: ii gnupg-agent 2.0.19-1 ii gnupg22.0.19-1 ii pinentry-gtk2 [pinentry-x11] 0.8.1-1 Versions of packages kmail suggests: ii bogofilter 1.2.2+dfsg1-1+b1 ii clamav | f-prot-installer none ii kaddressbook 4:4.4.11.1+l10n-1 ii kleopatra 4:4.4.11.1+l10n-1 ii procmail 3.22-19 -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#669918: annontation
I have to annotate that the problem is about the header buttuns in the window where is write the email. The freeze happens when i click on Send E-Mail with If i use Send Email it works without any problems. --- Daniel Koch signature.asc Description: This is a digitally signed message part.
Bug#659155: system-config-printer-kde: Crashes when trying to add a new printer
Package: system-config-printer-kde Version: 4:4.6.5-2 Severity: grave Tags: upstream Justification: renders package unusable Its just crashes right after clicking the button. It seams that it is on load but nothing happens. I tested this on two different machiens systemsettings(20470): Communication problem with systemsettings , it probably crashed. Error message was: org.freedesktop.DBus.Error.NoReply : Message did not receive a reply (timeout by message bus) -- System Information: Debian Release: wheezy/sid APT prefers testing-proposed-updates APT policy: (500, 'testing-proposed-updates'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.1.0-1-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages system-config-printer-kde depends on: ii python 2.7.2-10 ii python-cupshelpers 1.3.7-3 ii python-kde4 4:4.6.80-3+b2 ii python-qt4-dbus 4.9-2 system-config-printer-kde recommends no packages. system-config-printer-kde suggests no packages. -- debconf-show failed -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org