Bug#853894: similar issue with hauppauge WinTV nova-t-usb2
Dominique Dumont writes: Hi, > Hello > > I have a similar issue with Hauppauge WinTV-NOVA-T usb2 (note the wrong > Manufacturer shown in the traces): > > févr. 26 12:33:23 gandalf kernel: usb 7-2: new high-speed USB device number 2 > using ehci-pci > févr. 26 12:33:23 gandalf kernel: usb 7-2: New USB device found, > idVendor=2040, idProduct=9300 > févr. 26 12:33:23 gandalf kernel: usb 7-2: New USB device strings: Mfr=1, > Product=2, SerialNumber=3 > févr. 26 12:33:23 gandalf kernel: usb 7-2: Product: SOHO-FX2 > févr. 26 12:33:23 gandalf kernel: usb 7-2: Manufacturer: Hauppau攀 > févr. 26 12:33:23 gandalf kernel: usb 7-2: SerialNumber: 9301-00-F008B260 > févr. 26 12:33:23 gandalf kernel: dvb-usb: found a 'Hauppauge WinTV-NOVA-T > usb2' in cold state, will try to load a firmware > févr. 26 12:33:23 gandalf kernel: usb 7-2: firmware: direct-loading firmware > dvb-usb-nova-t-usb2-02.fw I can't find my nova-t usb2 but from what I remember theses strings are fine. Nothing wrong there. > févr. 26 12:33:23 gandalf kernel: [ cut here ] > févr. 26 12:33:23 gandalf kernel: WARNING: CPU: 1 PID: 2590 at > /build/linux-FoK828/linux-4.9.10/drivers/usb/core/hcd.c:1584 > usb_hcd_map_urb_for_dma+0x37c/0x570 [usbcore] > févr. 26 12:33:23 gandalf kernel: transfer buffer not dma capable > févr. 26 12:33:23 gandalf kernel: Modules linked in: > dvb_usb_nova_t_usb2(+) dvb_usb_dibusb_mc_common dvb_usb_dibusb_common > dib3000mc dibx000_common dvb_usb dvb_core rc_core bnep xt_multiport > uinput snd_hrtimer cpufreq_userspace cpufreq_conservative > cpufreq_powersave ip6table_filter ip6_tables iptable_filter bluetooth > rfkill binfmt_misc amdkfd edac_mce_amd evdev radeon edac_core kvm_amd > kvm irqbypass snd_hda_codec_via snd_hda_codec_generic cdc_ether pcspkr > ttm serio_raw snd_hda_codec_hdmi k10temp usbnet snd_hda_intel > drm_kms_helper snd_seq_midi snd_hda_codec snd_seq_midi_event > snd_rawmidi drm snd_seq snd_hda_core snd_seq_device sp5100_tco > snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm sg snd_timer i2c_algo_bit > snd soundcore asus_atk0110 button shpchp loop wmi acpi_cpufreq tpm_tis > tpm_tis_core tpm sunrpc parport_pc ppdev lp > févr. 26 12:33:23 gandalf kernel: parport ip_tables x_tables autofs4 > ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul > ablk_helper cryptd aes_x86_64 mbcache hid_generic usbhid hid sr_mod > cdrom sd_mod ata_generic uas usb_storage ohci_pci firewire_ohci ahci > pata_atiixp libahci firewire_core uhci_hcd xhci_pci crc_itu_t ehci_pci > xhci_hcd ohci_hcd ehci_hcd libata i2c_piix4 scsi_mod psmouse usbcore > r8169 mii usb_common fjes > févr. 26 12:33:23 gandalf kernel: CPU: 1 PID: 2590 Comm: systemd-udevd Not > tainted 4.9.0-2-amd64 #1 Debian 4.9.10-1 > févr. 26 12:33:23 gandalf kernel: Hardware name: System manufacturer System > Product Name/M4A785TD-V EVO, BIOS 021107/08/2009 > févr. 26 12:33:23 gandalf kernel: 8c929304 > afc77738 > févr. 26 12:33:23 gandalf kernel: 8c676e1e 9bdcad786180 > afc77790 > févr. 26 12:33:23 gandalf kernel: afc77944 9bdccc44e000 > 0001 8c676e9f > févr. 26 12:33:23 gandalf kernel: Call Trace: > févr. 26 12:33:23 gandalf kernel: [] ? dump_stack+0x5c/0x78 > févr. 26 12:33:23 gandalf kernel: [] ? __warn+0xbe/0xe0 > févr. 26 12:33:23 gandalf kernel: [] ? > warn_slowpath_fmt+0x5f/0x80 > févr. 26 12:33:23 gandalf kernel: [] ? > usb_hcd_map_urb_for_dma+0x37c/0x570 [usbcore] > févr. 26 12:33:23 gandalf kernel: [] ? > usb_hcd_submit_urb+0x330/0xaa0 [usbcore] >From a very quick search, I guess it's fixed by https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=43fab9793c1f44e665b4f98035a14942edf03ddc. As said, I can't find my device so can't test that it's fixing the issue. [...] > > On the other hand, a WinTV MiniStick loads fine (but does not work with > kaffeine or vdr): The issue is in the dvb-usb stuff and the WinTV MiniStick doesn't use it from what I can see. Arnaud
Bug#853894: similar issue with hauppauge WinTV nova-t-usb2
Hi, I compile the last release (4.9.13) and I have not the issue. For me it's fixed Thanks Alain Le 01/03/2017 à 10:44, Arnaud Patard (Rtp) a écrit : > Dominique Dumont writes: > > Hi, > >> Hello >> >> I have a similar issue with Hauppauge WinTV-NOVA-T usb2 (note the wrong >> Manufacturer shown in the traces): >> >> févr. 26 12:33:23 gandalf kernel: usb 7-2: new high-speed USB device number >> 2 using ehci-pci >> févr. 26 12:33:23 gandalf kernel: usb 7-2: New USB device found, >> idVendor=2040, idProduct=9300 >> févr. 26 12:33:23 gandalf kernel: usb 7-2: New USB device strings: Mfr=1, >> Product=2, SerialNumber=3 >> févr. 26 12:33:23 gandalf kernel: usb 7-2: Product: SOHO-FX2 >> févr. 26 12:33:23 gandalf kernel: usb 7-2: Manufacturer: Hauppau攀 >> févr. 26 12:33:23 gandalf kernel: usb 7-2: SerialNumber: 9301-00-F008B260 >> févr. 26 12:33:23 gandalf kernel: dvb-usb: found a 'Hauppauge WinTV-NOVA-T >> usb2' in cold state, will try to load a firmware >> févr. 26 12:33:23 gandalf kernel: usb 7-2: firmware: direct-loading firmware >> dvb-usb-nova-t-usb2-02.fw > > I can't find my nova-t usb2 but from what I remember theses strings are > fine. Nothing wrong there. > >> févr. 26 12:33:23 gandalf kernel: [ cut here ] >> févr. 26 12:33:23 gandalf kernel: WARNING: CPU: 1 PID: 2590 at >> /build/linux-FoK828/linux-4.9.10/drivers/usb/core/hcd.c:1584 >> usb_hcd_map_urb_for_dma+0x37c/0x570 [usbcore] >> févr. 26 12:33:23 gandalf kernel: transfer buffer not dma capable >> févr. 26 12:33:23 gandalf kernel: Modules linked in: >> dvb_usb_nova_t_usb2(+) dvb_usb_dibusb_mc_common dvb_usb_dibusb_common >> dib3000mc dibx000_common dvb_usb dvb_core rc_core bnep xt_multiport >> uinput snd_hrtimer cpufreq_userspace cpufreq_conservative >> cpufreq_powersave ip6table_filter ip6_tables iptable_filter bluetooth >> rfkill binfmt_misc amdkfd edac_mce_amd evdev radeon edac_core kvm_amd >> kvm irqbypass snd_hda_codec_via snd_hda_codec_generic cdc_ether pcspkr >> ttm serio_raw snd_hda_codec_hdmi k10temp usbnet snd_hda_intel >> drm_kms_helper snd_seq_midi snd_hda_codec snd_seq_midi_event >> snd_rawmidi drm snd_seq snd_hda_core snd_seq_device sp5100_tco >> snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm sg snd_timer i2c_algo_bit >> snd soundcore asus_atk0110 button shpchp loop wmi acpi_cpufreq tpm_tis >> tpm_tis_core tpm sunrpc parport_pc ppdev lp >> févr. 26 12:33:23 gandalf kernel: parport ip_tables x_tables autofs4 >> ext4 crc16 jbd2 crc32c_generic fscrypto ecb glue_helper lrw gf128mul >> ablk_helper cryptd aes_x86_64 mbcache hid_generic usbhid hid sr_mod >> cdrom sd_mod ata_generic uas usb_storage ohci_pci firewire_ohci ahci >> pata_atiixp libahci firewire_core uhci_hcd xhci_pci crc_itu_t ehci_pci >> xhci_hcd ohci_hcd ehci_hcd libata i2c_piix4 scsi_mod psmouse usbcore >> r8169 mii usb_common fjes >> févr. 26 12:33:23 gandalf kernel: CPU: 1 PID: 2590 Comm: systemd-udevd Not >> tainted 4.9.0-2-amd64 #1 Debian 4.9.10-1 >> févr. 26 12:33:23 gandalf kernel: Hardware name: System manufacturer System >> Product Name/M4A785TD-V EVO, BIOS 021107/08/2009 >> févr. 26 12:33:23 gandalf kernel: 8c929304 >> afc77738 >> févr. 26 12:33:23 gandalf kernel: 8c676e1e 9bdcad786180 >> afc77790 >> févr. 26 12:33:23 gandalf kernel: afc77944 9bdccc44e000 >> 0001 8c676e9f >> févr. 26 12:33:23 gandalf kernel: Call Trace: >> févr. 26 12:33:23 gandalf kernel: [] ? >> dump_stack+0x5c/0x78 >> févr. 26 12:33:23 gandalf kernel: [] ? __warn+0xbe/0xe0 >> févr. 26 12:33:23 gandalf kernel: [] ? >> warn_slowpath_fmt+0x5f/0x80 >> févr. 26 12:33:23 gandalf kernel: [] ? >> usb_hcd_map_urb_for_dma+0x37c/0x570 [usbcore] >> févr. 26 12:33:23 gandalf kernel: [] ? >> usb_hcd_submit_urb+0x330/0xaa0 [usbcore] > > From a very quick search, I guess it's fixed by > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=43fab9793c1f44e665b4f98035a14942edf03ddc. > > As said, I can't find my device so can't test that it's fixing the issue. > > [...] >> >> On the other hand, a WinTV MiniStick loads fine (but does not work with >> kaffeine or vdr): > > The issue is in the dvb-usb stuff and the WinTV MiniStick doesn't use > it from what I can see. > > Arnaud >
Bug#856382:
Confirmed. netboot is functional again.
Bug#853894: similar issue with hauppauge WinTV nova-t-usb2
On mercredi 1 mars 2017 10:44:42 CET Arnaud Patard wrote: > From a very quick search, I guess it's fixed by > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=4 > 3fab9793c1f44e665b4f98035a14942edf03ddc. > > As said, I can't find my device so can't test that it's fixing the issue. kernel 4.9.0-2-amd64 #1 SMP Debian 4.9.13-1 (2017-02-27) fares better: I no longer have the kernel warning. But the device still does not work: mars 01 12:25:15 gandalf kernel: usb 7-2: USB disconnect, device number 3 mars 01 12:25:29 gandalf kernel: usb 7-2: new high-speed USB device number 4 using ehci-pci mars 01 12:25:29 gandalf kernel: usb 7-2: New USB device found, idVendor=2040, idProduct=9300 mars 01 12:25:29 gandalf kernel: usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 mars 01 12:25:29 gandalf kernel: usb 7-2: Product: SOHO-FX2 mars 01 12:25:29 gandalf kernel: usb 7-2: Manufacturer: Hauppau攀 mars 01 12:25:29 gandalf kernel: usb 7-2: SerialNumber: 9301-00-F008B260 mars 01 12:25:29 gandalf kernel: dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in cold state, will try to load a firmware mars 01 12:25:29 gandalf kernel: usb 7-2: firmware: direct-loading firmware dvb-usb-nova-t-usb2-02.fw mars 01 12:25:29 gandalf kernel: dvb-usb: could not stop the USB controller CPU. mars 01 12:25:29 gandalf kernel: dvb-usb: error while transferring firmware (transferred size: -11, block size: 1) mars 01 12:25:29 gandalf kernel: dvb-usb: firmware download failed at 6 with -22 mars 01 12:25:29 gandalf kernel: dvb_usb_nova_t_usb2: probe of 7-2:1.0 failed with error -22 > [...] > > > On the other hand, a WinTV MiniStick loads fine (but does not work with > > kaffeine or vdr): > The issue is in the dvb-usb stuff and the WinTV MiniStick doesn't use > it from what I can see. yes, WinTV MiniStick is now working again. Thanks for the hints All the best
Bug#853894: similar issue with hauppauge WinTV nova-t-usb2
On mercredi 1 mars 2017 10:44:42 CET you wrote: > > févr. 26 12:33:23 gandalf kernel: usb 7-2: Manufacturer: Hauppau攀 > > févr. 26 12:33:23 gandalf kernel: usb 7-2: SerialNumber: 9301-00-F008B260 > > févr. 26 12:33:23 gandalf kernel: dvb-usb: found a 'Hauppauge WinTV-NOVA-T > > usb2' in cold state, will try to load a firmware févr. 26 12:33:23 > > gandalf kernel: usb 7-2: firmware: direct-loading firmware > > dvb-usb-nova-t-usb2-02.fw > I can't find my nova-t usb2 but from what I remember theses strings are > fine. Nothing wrong there. yes, you're right. These weird string is harmless. Here's a trace when I plug the -nova-t-usb2 with kernel 4.8.0-2: mars 01 12:36:51 gandalf kernel: usb 7-2: new high-speed USB device number 4 using ehci-pci mars 01 12:36:51 gandalf kernel: usb 7-2: New USB device found, idVendor=2040, idProduct=9300 mars 01 12:36:51 gandalf kernel: usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 mars 01 12:36:51 gandalf kernel: usb 7-2: Product: SOHO-FX2 mars 01 12:36:51 gandalf kernel: usb 7-2: Manufacturer: Hauppau攀 mars 01 12:36:51 gandalf kernel: usb 7-2: SerialNumber: 9301-00-F008B260 mars 01 12:36:51 gandalf kernel: dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in cold state, will try to load a firmware mars 01 12:36:51 gandalf kernel: usb 7-2: firmware: direct-loading firmware dvb-usb-nova-t-usb2-02.fw mars 01 12:36:51 gandalf kernel: usb 7-2: USB disconnect, device number 4 mars 01 12:36:51 gandalf kernel: dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. mars 01 12:36:53 gandalf kernel: usb 7-2: new high-speed USB device number 5 using ehci-pci mars 01 12:36:53 gandalf kernel: usb 7-2: New USB device found, idVendor=2040, idProduct=9301 mars 01 12:36:53 gandalf kernel: usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 mars 01 12:36:53 gandalf kernel: usb 7-2: Product: SOHO-FX2 mars 01 12:36:53 gandalf kernel: usb 7-2: Manufacturer: Hauppau攀 mars 01 12:36:53 gandalf kernel: usb 7-2: SerialNumber: 9301-00-F008B260 mars 01 12:36:53 gandalf kernel: dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in warm state. mars 01 12:36:53 gandalf kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. mars 01 12:36:53 gandalf kernel: DVB: registering new adapter (Hauppauge WinTV-NOVA-T usb2) mars 01 12:36:53 gandalf kernel: dvb-usb: MAC address: 00:0d:fe:d2:d2:d2 mars 01 12:36:53 gandalf kernel: usb 7-2: DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)... mars 01 12:36:53 gandalf kernel: input: IR-receiver inside an USB DVB receiver as /devices/pci:00/:00:14.4/:04:07.2/usb7/7-2/input/input20 mars 01 12:36:53 gandalf kernel: dvb-usb: schedule remote query interval to 100 msecs. mars 01 12:36:53 gandalf kernel: dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and connected. HTH
Bug#853894: usb-dvb device not working since kernel 4.9
Control: tag -1 upstream patch moreinfo On Wed, 2017-02-01 at 21:09 +0100, Harald Weidner wrote: > Package: linux-image-4.9.0-1-amd64 > Version: 4.9.2-2 > > After the update from kernel 4.8 to 4.9 on a testing/stretch system, > my USB DVB-T receiver stopped working. > > The device is a Twinhan USB2 DVB-T tuner, so far supported by the > driver dvb_usb_vp7045. > When initializing, the driver tries to load a firmware file, and fails. > The error message is "transfer buffer not dma capable". [...] Please test whether the attached patches fix this. Instructions for building a patched kernel can be found at: https://kernel-handbook.alioth.debian.org/ch-common-tasks.html#s-common-official You need to provide the patches in this order: media-dvb-usb-don-t-use-stack-for-firmware-load.patch media-dvb-usb-don-t-use-stack-for-reset-either.patch Ben. -- Ben Hutchings Hoare's Law of Large Problems: Inside every large problem is a small problem struggling to get out. From: Mauro Carvalho Chehab Date: Tue, 24 Jan 2017 08:13:11 -0200 Subject: [media] dvb-usb: don't use stack for firmware load Bug-Debian: https://bugs.debian.org/853894 Origin: https://git.kernel.org/linus/43fab9793c1f44e665b4f98035a14942edf03ddc As reported by Marc Duponcheel , firmware load on dvb-usb is using the stack, with is not allowed anymore on default Kernel configurations: [ 1025.958836] dvb-usb: found a 'WideView WT-220U PenType Receiver (based on ZL353)' in cold state, will try to load a firmware [ 1025.958853] dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw' [ 1025.958855] dvb-usb: could not stop the USB controller CPU. [ 1025.958856] dvb-usb: error while transferring firmware (transferred size: -11, block size: 3) [ 1025.958856] dvb-usb: firmware download failed at 8 with -22 [ 1025.958867] usbcore: registered new interface driver dvb_usb_dtt200u [2.789902] dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw' [2.789905] [ cut here ] [2.789911] WARNING: CPU: 3 PID: 2196 at drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x430/0x560 [usbcore] [2.789912] transfer buffer not dma capable [2.789912] Modules linked in: btusb dvb_usb_dtt200u(+) dvb_usb_af9035(+) btrtl btbcm dvb_usb dvb_usb_v2 btintel dvb_core bluetooth rc_core rfkill x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd drm_kms_helper syscopyarea sysfillrect pcspkr i2c_i801 sysimgblt fb_sys_fops drm i2c_smbus i2c_core r8169 lpc_ich mfd_core mii thermal fan rtc_cmos video button acpi_cpufreq processor snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd crc32c_intel ahci libahci libata xhci_pci ehci_pci xhci_hcd ehci_hcd usbcore usb_common dm_mirror dm_region_hash dm_log dm_mod [2.789936] CPU: 3 PID: 2196 Comm: systemd-udevd Not tainted 4.9.0-gentoo #1 [2.789937] Hardware name: ASUS All Series/H81I-PLUS, BIOS 0401 07/23/2013 [2.789938] c9000339b690 812bd397 c9000339b6e0 [2.789939] c9000339b6d0 81055c86 06300339b6a0 880116c0c000 [2.789941] 0001 880116c08000 [2.789942] Call Trace: [2.789945] [] dump_stack+0x4d/0x66 [2.789947] [] __warn+0xc6/0xe0 [2.789948] [] warn_slowpath_fmt+0x4a/0x50 [2.789952] [] usb_hcd_map_urb_for_dma+0x430/0x560 [usbcore] [2.789954] [] ? io_schedule_timeout+0xd8/0x110 [2.789956] [] usb_hcd_submit_urb+0x9c/0x980 [usbcore] [2.789958] [] ? copy_page_to_iter+0x14f/0x2b0 [2.789960] [] ? pagecache_get_page+0x28/0x240 [2.789962] [] ? touch_atime+0x20/0xa0 [2.789964] [] usb_submit_urb+0x2c4/0x520 [usbcore] [2.789967] [] usb_start_wait_urb+0x5a/0xe0 [usbcore] [2.789969] [] usb_control_msg+0xbc/0xf0 [usbcore] [2.789970] [] usb_cypress_writemem+0x3d/0x40 [dvb_usb] [2.789972] [] usb_cypress_load_firmware+0x4f/0x130 [dvb_usb] [2.789973] [] ? console_unlock+0x2fe/0x5d0 [2.789974] [] ? vprintk_emit+0x27c/0x410 [2.789975] [] ? vprintk_default+0x1a/0x20 [2.789976] [] ? printk+0x43/0x4b [2.789977] [] dvb_usb_download_firmware+0x60/0xd0 [dvb_usb] [2.789979] [] dvb_usb_device_init+0x3d8/0x610 [dvb_usb] [2.789981] [] dtt200u_usb_probe+0x92/0xd0 [dvb_usb_dtt200u] [2.789984] [] usb_probe_interface+0xfc/0x270 [usbcore] [2.789985] [] driver_probe_device+0x215/0x2d0 [2.789986] [] __driver_attach+0x96/0xa0 [2.789987] [] ? driver_probe_device+0x2d0/0x2d0 [2.789988] [] bus_for_each_dev+0x5b/0x90 [2.789989] [] driver_attach+0x19/0x20 [2.789990] [] bus_add_driver+0x11c/0x220 [2.789991] [] driver_register+0x5b/0xd0 [2.789994] [] usb_register_driver+0x7c/0x130 [usbcore] [2.789994] [] ? 0xa06a5000 [2.789996] [] dtt200u_usb_driver_init+0x1e/0x20 [dvb_usb_dt
Processed: Re: Bug#853894: usb-dvb device not working since kernel 4.9
Processing control commands: > tag -1 upstream patch moreinfo Bug #853894 [linux-image-4.9.0-1-amd64] usb-dvb device not working since kernel 4.9 Added tag(s) moreinfo, upstream, and patch. -- 853894: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=853894 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
Bug#853894: similar issue with hauppauge WinTV nova-t-usb2
I'm not sure if this should be filed as a separate bug, but with the 4.9 kernel update the WinTV Aero-M (Hauppauge) TV card also stopped working. Trying the unstable vmlinux-4.9.0-2-amd64 kernel on a otherwise up to date Stretch system, the attached journal log was produced when the usb card was plugged in the system. -- Logs begin at Wed 2017-03-01 11:22:47 EST. -- Mar 01 11:23:54 ecube gnome-session-binary[1917]: Entering running state Mar 01 11:23:54 ecube dbus-daemon[1915]: Successfully activated service 'org.gnome.evolution.dataserver.AddressBook9' Mar 01 11:23:54 ecube systemd[1902]: Started Evolution address book service. Mar 01 11:23:55 ecube clipit[2300]: /build/glib2.0-IOHfFd/glib2.0-2.50.3/./gobject/gsignal.c:2523: signal 'child-added' is invalid for instance '0x55d32bc083e0' of type 'GtkMenu' Mar 01 11:23:56 ecube dbus-daemon[1915]: Activating via systemd: service name='org.gnome.Terminal' unit='gnome-terminal-server.service' Mar 01 11:23:56 ecube systemd[1902]: Starting GNOME Terminal Server... Mar 01 11:23:56 ecube telepathy-rakia[2170]: Exiting Mar 01 11:23:56 ecube dbus-daemon[1915]: Successfully activated service 'org.gnome.Terminal' Mar 01 11:23:56 ecube systemd[1902]: Started GNOME Terminal Server. Mar 01 11:23:56 ecube telepathy-haze[2172]: Exiting Mar 01 11:24:25 ecube realmd[1830]: quitting realmd service after timeout Mar 01 11:24:25 ecube realmd[1830]: stopping service Mar 01 11:24:33 ecube kernel: usb 1-10: new high-speed USB device number 6 using xhci_hcd Mar 01 11:24:33 ecube kernel: usb 1-10: New USB device found, idVendor=2040, idProduct=c61b Mar 01 11:24:33 ecube kernel: usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 01 11:24:33 ecube kernel: usb 1-10: Product: WinTV Aero-M Mar 01 11:24:33 ecube kernel: usb 1-10: Manufacturer: Hauppauge Mar 01 11:24:33 ecube kernel: usb 1-10: SerialNumber: 4034988243 Mar 01 11:24:33 ecube mtp-probe[2560]: checking bus 1, device 6: "/sys/devices/pci:00/:00:14.0/usb1/1-10" Mar 01 11:24:33 ecube mtp-probe[2560]: bus: 1, device: 6 was not an MTP device Mar 01 11:24:33 ecube kernel: usb 1-10: dvb_usb_v2: found a 'Hauppauge WinTV-Aero-M' in warm state Mar 01 11:24:33 ecube kernel: usb 1-10: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer Mar 01 11:24:33 ecube kernel: DVB: registering new adapter (Hauppauge WinTV-Aero-M) Mar 01 11:24:33 ecube kernel: [ cut here ] Mar 01 11:24:33 ecube kernel: WARNING: CPU: 1 PID: 2559 at /build/linux-QtSjAP/linux-4.9.13/drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x37c/0x570 [usbcore] Mar 01 11:24:33 ecube kernel: transfer buffer not dma capable Mar 01 11:24:33 ecube kernel: Modules linked in: dvb_usb_mxl111sf(+) dvb_usb_v2 tveeprom dvb_core rc_core fuse rfcomm snd_hrtimer snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device bnep snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec joydev btusb nouveau intel_rapl mxm_wmi snd_hda_core btrtl snd_hwdep x86_pkg_temp_thermal ttm intel_powerclamp snd_pcm_oss coretemp dell_wmi drm_kms_helper evdev iTCO_wdt hci_uart drm btbcm btqca btintel snd_mixer_oss sparse_keymap dell_smbios kvm_intel bluetooth i2c_algo_bit dcdbas snd_pcm iTCO_vendor_support snd_timer intel_lpss_acpi snd rfkill intel_lpss kvm tpm_crb sg soundcore video battery mei_me mfd_core shpchp mei tpm_tis irqbypass tpm_tis_core tpm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate acpi_als Mar 01 11:24:33 ecube kernel: kfifo_buf serio_raw industrialio intel_uncore button acpi_pad intel_rapl_perf wmi pcspkr binfmt_misc ecryptfs cbc sunrpc hmac encrypted_keys parport_pc ppdev lp parport ip_tables x_tables autofs4 ext4 crc16 jbd2 crc32c_generic fscrypto ecb mbcache uas usb_storage sr_mod cdrom sd_mod hid_generic usbhid crc32c_intel ahci libahci xhci_pci aesni_intel xhci_hcd aes_x86_64 glue_helper libata lrw gf128mul ablk_helper cryptd e1000e psmouse usbcore scsi_mod ptp i2c_i801 pps_core i2c_smbus usb_common fan thermal i2c_hid hid fjes Mar 01 11:24:33 ecube kernel: CPU: 1 PID: 2559 Comm: systemd-udevd Not tainted 4.9.0-2-amd64 #1 Debian 4.9.13-1 Mar 01 11:24:33 ecube kernel: Hardware name: Dell Inc. XPS 8900/0XJ8C4, BIOS 2.1.3 01/20/2016 Mar 01 11:24:33 ecube kernel: 94528594 b00186f33798 Mar 01 11:24:33 ecube kernel: 94276dde 932e0b07de40 b00186f337f0 Mar 01 11:24:33 ecube kernel: b00186f3399c 932e0bd54000 0001 94276e5f Mar 01 11:24:33 ecube kernel: Call Trace: Mar 01 11:24:33 ecube kernel: [] ? dump_stack+0x5c/0x78 Mar 01 11:24:33 ecube kernel: [] ? __warn+0xbe/0xe0 Mar 01 11:24:33 ecube kernel: [] ? warn_slowpath_fmt+0x5f/0x80 Mar 01 11:24:33 ecube kernel: [] ? usb_hcd_map_urb_for_dma+0x37c/0x570 [usbcore] Mar 01 11:24:33 ecube kernel: [] ? usb_hcd_submit_urb+0x330/0xaa0 [usbcore] Mar 01 11:24:33 ec
Bug#853894: similar issue with hauppauge WinTV nova-t-usb2
On Wed, 2017-03-01 at 11:46 -0500, Barry Fishman wrote: > I'm not sure if this should be filed as a separate bug, but with the > 4.9 kernel update the WinTV Aero-M (Hauppauge) TV card also stopped > working. > > Trying the unstable vmlinux-4.9.0-2-amd64 kernel on a otherwise up to > date Stretch system, the attached journal log was produced when the usb > card was plugged in the system. Please open a separate bug report for this. Ben. -- Ben Hutchings Hoare's Law of Large Problems: Inside every large problem is a small problem struggling to get out. signature.asc Description: This is a digitally signed message part
Bug#856505: No sound in Raspberry Pi 2, missing module?
Package: linux-image-4.9.0-2-armmp-lpae Version: 4.9.0-2 My Raspberry Pi 2 does not give any sound from the 3.5 mm jack. # cat /etc/apt/sources.list deb http://ftp.fi.debian.org/debian sid main contrib non-free deb-src http://ftp.fi.debian.org/debian sid main contrib non-free # ls /proc/asound ls: cannot access '/proc/asound': No such file or directory # modprobe snd-bcm2835 modprobe: FATAL: Module snd-bcm2835 not found in directory /lib/modules/4.9.0-2-armmp-lpae In Rasbian configuration: https://github.com/raspberrypi/linux/blob/rpi-4.9.y/arch/arm/configs/bcm2709_defconfig CONFIG_SND_BCM2835=m In Debian configuration: /boot/config-4.9.0-2-armmp-lpae I do not have "CONFIG_SND_BCM2835=m". I think the sound does not work for me because the module snd-bcm2835 does not exist. Can you configure kernel version 4.10 to include snd-bcm2835 as a module, when it comes to sid. Best Regards, Evald
Bug#856111: closed by Ben Hutchings (Bug#856111: fixed in linux 4.9.13-1)
control: reopen -1 >* udeb: Add more USB host and dual-role drivers to usb-modules > (Closes: #856111) I wrote previously: > After copying the firmware and installer to the SDcard, I set the > environment and booted the installer in uboot using: > | setenv console tty1 > | setenv bootargs console=tty1 fb=false > | boot > > The kernel boots, the syslogger starts, I get prompted with the > 'Select a language' dialog, but my USB keyboard does not work in d-i (it > did in uboot). I retried with the images from March 1st, which should include 4.9.13-1 according to https://d-i.debian.org/daily-images/armhf/20170301-00:17/build_hd-media.log I still have no keyboard in d-i. Cheers, weasel -- | .''`. ** Debian ** Peter Palfrader | : :' : The universal https://www.palfrader.org/ | `. `' Operating System | `-https://www.debian.org/
Processed: Re: Bug#856111 closed by Ben Hutchings (Bug#856111: fixed in linux 4.9.13-1)
Processing control commands: > reopen -1 Bug #856111 {Done: Ben Hutchings } [src:linux] failed install: no keyboard support on armhf:BananaPi 'reopen' may be inappropriate when a bug has been closed with a version; all fixed versions will be cleared, and you may need to re-add them. Bug reopened No longer marked as fixed in versions linux/4.9.13-1. -- 856111: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=856111 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
Bug#856111: closed by Ben Hutchings (Bug#856111: fixed in linux 4.9.13-1)
Control: tag -1 moreinfo On Wed, 2017-03-01 at 19:31 +, Peter Palfrader wrote: > control: reopen -1 > > > * udeb: Add more USB host and dual-role drivers to usb-modules > > (Closes: #856111) > > I wrote previously: > > > After copying the firmware and installer to the SDcard, I set the > > environment and booted the installer in uboot using: > > > setenv console tty1 > > > setenv bootargs console=tty1 fb=false > > > boot > > > > The kernel boots, the syslogger starts, I get prompted with the > > 'Select a language' dialog, but my USB keyboard does not work in d-i (it > > did in uboot). > > I retried with the images from March 1st, which should include > 4.9.13-1 according to > https://d-i.debian.org/daily-images/armhf/20170301-00:17/build_hd-media.log > > I still have no keyboard in d-i. The installer now seems to include all the USB drivers for this platform, and all the HID drivers we build. So I'm puzzled as to what might be missing. Do you have a serial console that could be used to debug this further? Ben. -- Ben Hutchings Hoare's Law of Large Problems: Inside every large problem is a small problem struggling to get out. signature.asc Description: This is a digitally signed message part
Processed: Re: Bug#856111 closed by Ben Hutchings (Bug#856111: fixed in linux 4.9.13-1)
Processing control commands: > tag -1 moreinfo Bug #856111 [src:linux] failed install: no keyboard support on armhf:BananaPi Added tag(s) moreinfo. -- 856111: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=856111 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
Bug#856111: closed by Ben Hutchings (Bug#856111: fixed in linux 4.9.13-1)
On Wed, 01 Mar 2017, Ben Hutchings wrote: > > I retried with the images from March 1st, which should include > > 4.9.13-1 according to > > https://d-i.debian.org/daily-images/armhf/20170301-00:17/build_hd-media.log > > > > I still have no keyboard in d-i. > > The installer now seems to include all the USB drivers for this > platform, and all the HID drivers we build. So I'm puzzled as to what > might be missing. > > Do you have a serial console that could be used to debug this further? No, I don't currently have the right connectors needed to get that going. Hm. -- | .''`. ** Debian ** Peter Palfrader | : :' : The universal https://www.palfrader.org/ | `. `' Operating System | `-https://www.debian.org/
linux_4.9.13-1~bpo8+1_amd64.changes ACCEPTED into jessie-backports->backports-policy, jessie-backports
Accepted: -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Mon, 27 Feb 2017 23:01:38 +0100 Source: linux Binary: linux-source-4.9 linux-support-4.9.0-0.bpo.2 linux-doc-4.9 linux-manual-4.9 linux-kbuild-4.9 linux-cpupower libcpupower1 libcpupower-dev linux-perf-4.9 libusbip-dev usbip hyperv-daemons linux-headers-4.9.0-0.bpo.2-common linux-headers-4.9.0-0.bpo.2-common-rt linux-libc-dev linux-headers-4.9.0-0.bpo.2-all linux-headers-4.9.0-0.bpo.2-all-alpha kernel-image-4.9.0-0.bpo.2-alpha-generic-di nic-modules-4.9.0-0.bpo.2-alpha-generic-di nic-wireless-modules-4.9.0-0.bpo.2-alpha-generic-di nic-shared-modules-4.9.0-0.bpo.2-alpha-generic-di serial-modules-4.9.0-0.bpo.2-alpha-generic-di usb-serial-modules-4.9.0-0.bpo.2-alpha-generic-di ppp-modules-4.9.0-0.bpo.2-alpha-generic-di pata-modules-4.9.0-0.bpo.2-alpha-generic-di cdrom-core-modules-4.9.0-0.bpo.2-alpha-generic-di scsi-core-modules-4.9.0-0.bpo.2-alpha-generic-di scsi-modules-4.9.0-0.bpo.2-alpha-generic-di loop-modules-4.9.0-0.bpo.2-alpha-generic-di btrfs-modules-4.9.0-0.bpo.2-alpha-generic-di ext4-modules-4.9.0-0.bpo.2-alpha-generic-di isofs-modules-4.9.0-0.bpo.2-alpha-generic-di jfs-modules-4.9.0-0.bpo.2-alpha-generic-di xfs-modules-4.9.0-0.bpo.2-alpha-generic-di fat-modules-4.9.0-0.bpo.2-alpha-generic-di md-modules-4.9.0-0.bpo.2-alpha-generic-di multipath-modules-4.9.0-0.bpo.2-alpha-generic-di usb-modules-4.9.0-0.bpo.2-alpha-generic-di usb-storage-modules-4.9.0-0.bpo.2-alpha-generic-di fb-modules-4.9.0-0.bpo.2-alpha-generic-di input-modules-4.9.0-0.bpo.2-alpha-generic-di event-modules-4.9.0-0.bpo.2-alpha-generic-di mouse-modules-4.9.0-0.bpo.2-alpha-generic-di nic-pcmcia-modules-4.9.0-0.bpo.2-alpha-generic-di pcmcia-modules-4.9.0-0.bpo.2-alpha-generic-di nic-usb-modules-4.9.0-0.bpo.2-alpha-generic-di sata-modules-4.9.0-0.bpo.2-alpha-generic-di crc-modules-4.9.0-0.bpo.2-alpha-generic-di crypto-modules-4.9.0-0.bpo.2-alpha-generic-di crypto-dm-modules-4.9.0-0.bpo.2-alpha-generic-di ata-modules-4.9.0-0.bpo.2-alpha-generic-di nbd-modules-4.9.0-0.bpo.2-alpha-generic-di squashfs-modules-4.9.0-0.bpo.2-alpha-generic-di virtio-modules-4.9.0-0.bpo.2-alpha-generic-di zlib-modules-4.9.0-0.bpo.2-alpha-generic-di fuse-modules-4.9.0-0.bpo.2-alpha-generic-di srm-modules-4.9.0-0.bpo.2-alpha-generic-di linux-image-4.9.0-0.bpo.2-alpha-generic linux-headers-4.9.0-0.bpo.2-alpha-generic linux-image-4.9.0-0.bpo.2-alpha-smp linux-headers-4.9.0-0.bpo.2-alpha-smp linux-headers-4.9.0-0.bpo.2-all-amd64 linux-image-4.9.0-0.bpo.2-amd64-unsigned linux-headers-4.9.0-0.bpo.2-amd64 linux-image-4.9.0-0.bpo.2-amd64-dbg linux-image-4.9.0-0.bpo.2-rt-amd64-unsigned linux-headers-4.9.0-0.bpo.2-rt-amd64 linux-image-4.9.0-0.bpo.2-rt-amd64-dbg linux-headers-4.9.0-0.bpo.2-all-arm64 linux-image-4.9.0-0.bpo.2-arm64-unsigned linux-headers-4.9.0-0.bpo.2-arm64 linux-image-4.9.0-0.bpo.2-arm64-dbg linux-headers-4.9.0-0.bpo.2-all-armel kernel-image-4.9.0-0.bpo.2-marvell-di nic-modules-4.9.0-0.bpo.2-marvell-di nic-shared-modules-4.9.0-0.bpo.2-marvell-di usb-serial-modules-4.9.0-0.bpo.2-marvell-di ppp-modules-4.9.0-0.bpo.2-marvell-di cdrom-core-modules-4.9.0-0.bpo.2-marvell-di scsi-core-modules-4.9.0-0.bpo.2-marvell-di loop-modules-4.9.0-0.bpo.2-marvell-di ipv6-modules-4.9.0-0.bpo.2-marvell-di btrfs-modules-4.9.0-0.bpo.2-marvell-di ext4-modules-4.9.0-0.bpo.2-marvell-di isofs-modules-4.9.0-0.bpo.2-marvell-di jffs2-modules-4.9.0-0.bpo.2-marvell-di jfs-modules-4.9.0-0.bpo.2-marvell-di fat-modules-4.9.0-0.bpo.2-marvell-di minix-modules-4.9.0-0.bpo.2-marvell-di md-modules-4.9.0-0.bpo.2-marvell-di multipath-modules-4.9.0-0.bpo.2-marvell-di usb-modules-4.9.0-0.bpo.2-marvell-di usb-storage-modules-4.9.0-0.bpo.2-marvell-di fb-modules-4.9.0-0.bpo.2-marvell-di input-modules-4.9.0-0.bpo.2-marvell-di event-modules-4.9.0-0.bpo.2-marvell-di mouse-modules-4.9.0-0.bpo.2-marvell-di nic-usb-modules-4.9.0-0.bpo.2-marvell-di sata-modules-4.9.0-0.bpo.2-marvell-di crc-modules-4.9.0-0.bpo.2-marvell-di crypto-modules-4.9.0-0.bpo.2-marvell-di crypto-dm-modules-4.9.0-0.bpo.2-marvell-di mmc-modules-4.9.0-0.bpo.2-marvell-di nbd-modules-4.9.0-0.bpo.2-marvell-di squashfs-modules-4.9.0-0.bpo.2-marvell-di uinput-modules-4.9.0-0.bpo.2-marvell-di zlib-modules-4.9.0-0.bpo.2-marvell-di leds-modules-4.9.0-0.bpo.2-marvell-di udf-modules-4.9.0-0.bpo.2-marvell-di fuse-modules-4.9.0-0.bpo.2-marvell-di mtd-modules-4.9.0-0.bpo.2-marvell-di linux-image-4.9.0-0.bpo.2-marvell linux-headers-4.9.0-0.bpo.2-marvell linux-headers-4.9.0-0.bpo.2-all-armhf linux-image-4.9.0-0.bpo.2-armmp-unsigned linux-headers-4.9.0-0.bpo.2-armmp linux-image-4.9.0-0.bpo.2-armmp-lpae-unsigned linux-headers-4.9.0-0.bpo.2-armmp-lpae linux-headers-4.9.0-0.bpo.2-all-hppa kernel-image-4.9.0-0.bpo.2-parisc-di nic-modules-4.9.0-0.bpo.2-parisc-di nic-shared-modules-4.9.0-0.bpo.2-parisc-di serial-modules-4.9.0-0.bpo.2-parisc-di usb-serial-modules-4.9.0-0.bpo.2-parisc-di ppp-modules-4