Bug#878846: linux-image: increase CONFIG_DVB_MAX_ADAPTERS
Package: src:linux Version: 4.14~rc3-1~exp1 Severity: normal Dear Maintainer, Since kernel 4.14 the kernel finally supports Digital Devices Max S8. It exposes 8 adapters via /dev/dvb/adapters. Even if we have one more card, then this constant is insuficcient. Please raise up this value in default debian kernel configuration. -- Package-specific info: ** Version: Linux version 4.14.0-rc3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170920 (Debian 6.4.0-7)) #1 SMP Debian 4.14~rc3-1~exp1 (2017-10-02) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0-rc3-amd64 root=UUID=f116d1e7-09f8-4c08-b89c-ae652ebf41a3 ro quiet ** Not tainted ** Kernel log: Unable to read kernel log; any relevant messages should be attached ** Model information sys_vendor: To Be Filled By O.E.M. product_name: To Be Filled By O.E.M. product_version: To Be Filled By O.E.M. chassis_vendor: To Be Filled By O.E.M. chassis_version: To Be Filled By O.E.M. bios_vendor: American Megatrends Inc. bios_version: P1.50 board_vendor: ASRock board_name: H97 Anniversary board_version: ** Loaded modules: ipt_MASQUERADE nf_nat_masquerade_ipv4 bridge stp llc xt_nat xt_tcpudp iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c veth binfmt_misc iptable_filter mxl5xx intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel iTCO_wdt iTCO_vendor_support kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore intel_rapl_perf pcspkr joydev evdev mei_me i915 sg lpc_ich ddbridge mfd_core dvb_core drm_kms_helper shpchp drm mei dw_dmac i2c_algo_bit snd_soc_sst_acpi battery dw_dmac_core snd_soc_sst_match snd_soc_rt5640 elan_i2c video snd_soc_rl6231 snd_soc_ssm4567 snd_soc_core snd_compress snd_pcm snd_timer snd soundcore spi_pxa2xx_platform acpi_pad button nfsd auth_rpcgss nfs_acl lockd grace sunrpc nct6775 hwmon_vid coretemp ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic fscrypto ecb crypto_simd cryptd glue_helper aes_x86_64 hid_logitech_hidpp hid_logitech_dj usbhid sd_mod crc32c_intel ahci libahci i2c_i801 libata scsi_mod r8169 mii i2c_hid hid sdhci_acpi sdhci mmc_core i2c_designware_platform i2c_designware_core ehci_pci ehci_hcd usbcore usb_common ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet dhcp # This is an autoconfigured IPv6 interface iface eth0 inet6 auto ** Network status: *** IP interfaces and addresses: 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether d0:50:99:59:2b:d0 brd ff:ff:ff:ff:ff:ff inet 10.2.1.3/24 brd 10.2.1.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::d250:99ff:fe59:2bd0/64 scope link valid_lft forever preferred_lft forever 5: lxc-bridge-nat: mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether fa:88:c8:05:57:a0 brd ff:ff:ff:ff:ff:ff inet 192.168.100.1/24 brd 192.168.100.255 scope global lxc-bridge-nat valid_lft forever preferred_lft forever inet6 fe80::f888:c8ff:fe05:57a0/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive| Transmit face |bytespackets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo:4192 81000 0 0 0 4192 81000 0 0 0 eth0: 15164896 178679000 0 072 516143265 371484000 0 0 0 lxc-bridge-nat: 0 0000 0 0 0 11659 123000 0 0 0 *** Protocol statistics: Ip: Forwarding: 1 177875 total packets received 0 forwarded 0 incoming packets discarded 177873 incoming packets delivered 371585 requests sent out 57 dropped because of missing route Icmp: 7648 ICMP messages received 0 input ICMP message failed ICMP input histogram: destination unreachable: 14 echo requests: 538 echo replies: 7096 7636 ICMP messages sent 0 ICMP messages failed ICMP output histogram: echo requests: 7098 echo replies: 538 IcmpMsg: InType0: 7096 InType3: 14 InType8: 538 OutType0: 538 OutType8: 7098 Tcp: 22 active connection op
Processed: severity of 878846 is wishlist
Processing commands for cont...@bugs.debian.org: > severity 878846 wishlist Bug #878846 [src:linux] linux-image: increase CONFIG_DVB_MAX_ADAPTERS Severity set to 'wishlist' from 'normal' > thanks Stopping processing here. Please contact me if you need assistance. -- 878846: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=878846 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
Bug#833035: linux-image-3.16.0-4-amd64: Keyspan USB serial adapter USA-49WLC failed to load firmware
On 10/16/2017 11:32 AM, Paul Fox wrote: ben, chris -- regarding this bug: Bug#833035: linux-image-3.16.0-4-amd64: Keyspan USB serial adapter USA-49WLC failed to load firmware whatever became of the proposed patch. i'm running ubuntu 16.04.3, kernel 4.4.0-97-generic, and the failure is still present there. paul =-- paul fox, p...@foxharp.boston.ma.us (arlington, ma, where it's 50.2 degrees) . The patch provided fixed the bug. I think I responded with the news. Chris
Bug#864562: No ethernet link on Olimex A20-Olinuxino Micro Rev. J, possibly PHY driver problem
Hello Karsten, There may be an issue : yesterday evening, I only started the installation, just enough to verify the communication between the installer and the repositories. I didn't complete the installation. Maybe I should try a (minimalist) installation and verify that the network is still working when the system reboots ! Do you think it is necessary ? Regards Jean-Louis Mounier Le 16/10/2017 à 22:45, Karsten Merker a écrit : On Mon, Oct 16, 2017 at 09:39:36PM +0200, Jean-Louis Mounier wrote: for some reasons, I changed my mail configuration and I discovered your last request very recently (!) Sorry for the delay. Now I keep an eye on the bug thru the bug web page. I discovered a new installer release but the bug is still present. Now the test : => gpio clear PA17 gpio: pin PA17 (gpio 17) value is 0 =>run bootcmd after that, the installer got IPV4 and IPV6 addresses wwith DHCP and then ran fine. Hope it helps Yes, that helps as it confirms that a change in u-boot alone is enough to work around the issue in Linux as well (although it is debateable whether the kernel should rely on the bootloader in this case or not). There has recently been an attempt to address the issue in mainline u-boot, but that didn't work out as planned and the patch got rejected: https://lists.denx.de/pipermail/u-boot/2017-September/307778.html Regards, Karsten
Bug#878866: usbip configuration is not usable
Package: linux-source-4.13 Version: 4.13.4-2 Severity: normal Hi, the current debian configuration of usbip is unusable (client): CONFIG_USBIP_CORE=m CONFIG_USBIP_VHCI_HCD=m CONFIG_USBIP_VHCI_HC_PORTS=31 CONFIG_USBIP_VHCI_NR_HCS=8 CONFIG_USBIP_HOST=m CONFIG_USBIP_VUDC=m # CONFIG_USBIP_DEBUG is not set usbip attach fails with "too many ports" error. I've lowerd to 4 ports and 1 host and it works, the kernel default is 8 ports 1 host, but I think 4 is enough Regards -- System Information: Debian Release: buster/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 4.9.0-4-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) Versions of packages linux-source-4.13 depends on: ii binutils 2.29.1-4 ii xz-utils 5.2.2-1.3 Versions of packages linux-source-4.13 recommends: ii bc1.06.95-9+b3 ii gcc 4:7.2.0-1d1 ii libc6-dev [libc-dev] 2.24-17 ii make 4.1-9.1 Versions of packages linux-source-4.13 suggests: ii libncurses5-dev [ncurses-dev] 6.0+20170902-1 pn libqt4-dev ii pkg-config 0.29-4+b1
Processed: reassign 878866 to usbip
Processing commands for cont...@bugs.debian.org: > reassign 878866 usbip 4.13.4-2 Bug #878866 [linux-source-4.13] usbip configuration is not usable Bug reassigned from package 'linux-source-4.13' to 'usbip'. No longer marked as found in versions linux/4.13.4-2. Ignoring request to alter fixed versions of bug #878866 to the same values previously set Bug #878866 [usbip] usbip configuration is not usable There is no source info for the package 'usbip' at version '4.13.4-2' with architecture '' Unable to make a source version for version '4.13.4-2' Marked as found in versions 4.13.4-2. > thanks Stopping processing here. Please contact me if you need assistance. -- 878866: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=878866 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
Processed: severity of 877911 is important
Processing commands for cont...@bugs.debian.org: > severity 877911 important Bug #877911 [src:linux] Please set CONFIG_BRCMFMAC_SDIO=y for WiFi on the Raspberry Pi 3 Severity set to 'important' from 'wishlist' > thanks Stopping processing here. Please contact me if you need assistance. -- 877911: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=877911 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
Processed: Bug also found on 4.13.4-1
Processing commands for cont...@bugs.debian.org: > found 875362 4.13.4-1 Bug #875362 [src:linux] linux-image-4.12.0-1-amd64: 5GHz wifi randomly drops on ath10k QCA6174 Marked as found in versions linux/4.13.4-1. > End of message, stopping processing here. Please contact me if you need assistance. -- 875362: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=875362 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
libbpfcc needs a way to ensure the current kernel's headers are installed
Hi! (Applications linked against) libbpfcc will dynamically compile and load C source code into eBPF byte code at runtime and load the result into the kernel for various purposes (e.g. socket filtering, tracing, etc.). For this to work, it needs the kernel headers of the *currently running kernel* [0,1]. Therefore, the maintainer of libbpfcc in Debian added a corresponding dependency [2] which unfortunately breaks everything but amd64 [3] and does also not quite fix the original bug [4]. Please comment on bug #877925 [4] and/or #878922 [3] regarding on how to solve the "this package needs the current kernel's headers installed" problem! Best regards Alexander Kurtz [0] https://github.com/iovisor/bcc/issues/397 [1] https://github.com/iovisor/bcc/issues/743 [2] https://anonscm.debian.org/git/collab-maint/bpfcc.git/commit/?id=f73049e48fd98dd01d4475f88f6b490e6a1b34bb [3] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=878935 [4] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=877925 signature.asc Description: This is a digitally signed message part
