Bug#906189: linux-image-4.17.0-1-amd64: Laptop does not suspend in 4.17 - worked up to 4.16
Does it suffice to know that the problem does not occur any more with kernel 4.19.0-rc2+? I could continue with the "git bisect" but it would take days. :( signature.asc Description: OpenPGP digital signature
Bug#908192: linux-image-4.18.0-1-amd64: After upgrade kernel to linux-image-4.18.0-1-amd64, LXC can not start
Package: src:linux Version: 4.18.6-1 Severity: normal Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** As title, after upgrade to linux-image-4.18.0-1-amd64, lxc can not start, If boot to old kernel (4.17-3..), lxc can start again. * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these template lines *** -- Package-specific info: ** Version: Linux version 4.18.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-29)) #1 SMP Debian 4.18.6-1 (2018-09-06) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-1-amd64 root=UUID=5cb16262-d214-4feb-9369-81a291a2388b ro apparmor=1 security=apparmor quiet ** Not tainted ** Kernel log: ** Model information [ 50.617580] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 50.617598] lxcbr0: port 2(veth471YAX) entered blocking state [ 50.617599] lxcbr0: port 2(veth471YAX) entered forwarding state [ 50.633435] lxcbr0: port 2(veth471YAX) entered disabled state [ 50.633527] device veth471YAX left promiscuous mode [ 50.633528] lxcbr0: port 2(veth471YAX) entered disabled state [ 111.648345] lxcbr0: port 2(vethMT2FWQ) entered blocking state [ 111.648347] lxcbr0: port 2(vethMT2FWQ) entered disabled state [ 111.648372] device vethMT2FWQ entered promiscuous mode [ 111.651743] lxcbr0: port 2(vethMT2FWQ) entered disabled state [ 111.651866] device vethMT2FWQ left promiscuous mode [ 111.651867] lxcbr0: port 2(vethMT2FWQ) entered disabled state [ 221.679794] lxcbr0: port 2(vethYPTVY4) entered blocking state [ 221.679795] lxcbr0: port 2(vethYPTVY4) entered disabled state [ 221.679821] device vethYPTVY4 entered promiscuous mode [ 221.701044] eth0: renamed from vethHEA5JH [ 221.724082] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 221.725177] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 221.725196] lxcbr0: port 2(vethYPTVY4) entered blocking state [ 221.725197] lxcbr0: port 2(vethYPTVY4) entered forwarding state [ 221.740431] lxcbr0: port 2(vethYPTVY4) entered disabled state [ 221.740526] device vethYPTVY4 left promiscuous mode [ 221.740527] lxcbr0: port 2(vethYPTVY4) entered disabled state [ 229.743698] lxcbr0: port 2(vethG6VBDH) entered blocking state [ 229.743699] lxcbr0: port 2(vethG6VBDH) entered disabled state [ 229.743727] device vethG6VBDH entered promiscuous mode [ 229.769070] eth0: renamed from vethESL89I [ 229.791893] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 229.792987] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 229.793003] lxcbr0: port 2(vethG6VBDH) entered blocking state [ 229.793004] lxcbr0: port 2(vethG6VBDH) entered forwarding state [ 229.804473] lxcbr0: port 2(vethG6VBDH) entered disabled state [ 229.804572] device vethG6VBDH left promiscuous mode [ 229.804573] lxcbr0: port 2(vethG6VBDH) entered disabled state [ 252.543415] lxcbr0: port 2(vethQTK7VL) entered blocking state [ 252.543416] lxcbr0: port 2(vethQTK7VL) entered disabled state [ 252.543442] device vethQTK7VL entered promiscuous mode [ 252.573029] eth0: renamed from veth8J8RJX [ 252.587882] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 252.589098] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 252.589115] lxcbr0: port 2(vethQTK7VL) entered blocking state [ 252.589116] lxcbr0: port 2(vethQTK7VL) entered forwarding state [ 252.600700] lxcbr0: port 2(vethQTK7VL) entered disabled state [ 252.600801] device vethQTK7VL left promiscuous mode [ 252.600802] lxcbr0: port 2(vethQTK7VL) entered disabled state [ 1270.152712] lxcbr0: port 2(veth83ORBG) entered blocking state [ 1270.152713] lxcbr0: port 2(veth83ORBG) entered disabled state [ 1270.152741] device veth83ORBG entered promiscuous mode [ 1270.175792] eth0: renamed from vethXLKI4X [ 1270.199037] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1270.200115] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1270.200133] lxcbr0: port 2(veth83ORBG) entered blocking state [ 1270.200134] lxcbr0: port 2(veth83ORBG) entered forwarding state [ 1270.215342] lxcbr0: port 2(veth83ORBG) entered disabled state [ 1270.215431] device veth83ORBG left promiscuous mode [ 1270.215432] lxcbr0: port 2(veth83ORBG) entered disabled state [ 1281.911374] lxcbr0: port 2(vethWLL3H7) entered blocking state [ 1281.911375] lxcbr0: port 2(vethWLL3H7) entered disabled state [ 1281.911402] device vethWLL3H7 entered promiscuous mode [ 1281.935451] eth0: renamed from vethDVX7T8 [ 1281.946282] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1281.947522] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1281.947540] lxcbr0: port 2(vethWLL3H7) entered blocking state [ 1281.947541] lxcbr0: port 2(vethWLL3H7) entered forwarding state [ 1281.968923] lxcbr0: port 2(vethWLL3H7) entered d
Bug#908192: Acknowledgement (linux-image-4.18.0-1-amd64: After upgrade kernel to linux-image-4.18.0-1-amd64, LXC can not start)
Attached config and log file for lxc-start -n name -l debug -- Key fingerprint: CDB3 6C62 254B C088 1E5D DD32 182C 97DB CF2C 80AC lxc.start.auto = 1 lxc.start.delay = 0 # Distribution configuration lxc.include = /usr/share/lxc/config/debian.common.conf lxc.include = /usr/share/lxc/config/debian.userns.conf lxc.arch = x86_64 # Container specific configuration lxc.kmsg = 0 lxc.id_map = u 0 1210 65536 lxc.id_map = g 0 1210 65536 #lxc.cap.drop = sys_module mac_admin mac_override sys_time mknod net_raw sys_rawio sys_nice sys_pacct setfcap setpcap sys_ptrace syslog sys_resource sys_tty_config wake_alarm sys_admin #lxc.aa_profile = lxc-container-default-local #lxc.aa_allow_incomplete = 0 lxc.aa_profile = unconfined lxc.rootfs = /var/lib/lxc/lxc121/rootfs lxc.rootfs.backend = dir lxc.utsname = lxc121 # Network configuration lxc.network.type = veth lxc.network.flags = up lxc.network.link = lxcbr0 lxc.network.hwaddr = AA:BB:CC:DD:01:21 lxc.network.ipv4 = 192.168.168.121/32 lxc.network.ipv4.gateway = 192.168.168.1 # manual mount for drop sys_admin lxc.mount.entry = tmpfs run tmpfs rw,nosuid,noexec,relatime,mode=0755,create=dir 0 0 lxc.mount.entry = tmpfs run/lock tmpfs rw,nosuid,nodev,noexec,relatime,mode=1777,size=5M,create=dir 0 0 lxc.mount.entry = tmpfs run/shm tmpfs rw,nosuid,nodev,noexec,relatime,mode=1777,create=dir 0 0 lxc.mount.entry = tmpfs root tmpfs nosuid,nodev,noatime,mode=0700,uid=0,gid=0 0 0 lxc.mount.entry = tmpfs home/lxc121 tmpfs nosuid,nodev,noatime,mode=0700,uid=1121,gid=1121 0 0 # mount tmp first then GUI lxc.mount.entry = tmpfs tmp tmpfs nosuid,nodev,noatime,mode=1777,create=dir 0 0 lxc.mount.entry = /ramdisk ramdisk none bind,optional,create=dir,nodev,nosuid 0 0 lxc.mount.entry = tmpfs var/cache/apt/archives tmpfs nosuid,nodev,noatime,mode=0755,create=dir 0 0 lxc-start 20180907081437.752 INFO lxc_start_ui - tools/lxc_start.c:main:277 - using rcfile /var/lib/lxc/lxc121/config lxc-start 20180907081437.752 WARN lxc_confile - confile.c:set_config_pivotdir:2262 - lxc.pivotdir is ignored. It will soon become an error. lxc-start 20180907081437.752 INFO lxc_confile - confile.c:set_config_idmaps:1861 - read uid map: type u nsid 0 hostid 1210 range 65536 lxc-start 20180907081437.752 INFO lxc_confile - confile.c:set_config_idmaps:1861 - read uid map: type g nsid 0 hostid 1210 range 65536 lxc-start 20180907081437.752 INFO lxc_container - lxccontainer.c:do_lxcapi_start:877 - Attempting to set proc title to [lxc monitor] /var/lib/lxc lxc121 lxc-start 20180907081437.752 INFO lxc_lsm - lsm/lsm.c:lsm_init:48 - LSM security driver AppArmor lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:parse_config_v2:435 - processing: .reject_force_umount # comment this to allow umount -f; not recommended. lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:parse_config_v2:610 - Adding native rule for reject_force_umount action 0(kill). lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:do_resolve_add_rule:276 - Setting Seccomp rule to reject force umounts. lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:parse_config_v2:614 - Adding compat rule for reject_force_umount action 0(kill). lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:do_resolve_add_rule:276 - Setting Seccomp rule to reject force umounts. lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:do_resolve_add_rule:276 - Setting Seccomp rule to reject force umounts. lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:parse_config_v2:435 - processing: .[all]. lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:parse_config_v2:435 - processing: .kexec_load errno 1. lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:parse_config_v2:610 - Adding native rule for kexec_load action 327681(errno). lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:parse_config_v2:614 - Adding compat rule for kexec_load action 327681(errno). lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:parse_config_v2:435 - processing: .open_by_handle_at errno 1. lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:parse_config_v2:610 - Adding native rule for open_by_handle_at action 327681(errno). lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:parse_config_v2:614 - Adding compat rule for open_by_handle_at action 327681(errno). lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:parse_config_v2:435 - processing: .init_module errno 1. lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:parse_config_v2:610 - Adding native rule for init_module action 327681(errno). lxc-start 20180907081437.753 INFO lxc_seccomp - seccomp.c:parse_config_v2:614 - Adding compat rule for init_module action 327681(errno). lxc-s
Bug#908196: linux-image-4.9.0-8-armmp: Please set CONFIG_LEDS_PCA963X=m
Package: src:linux Version: 4.9.110-3+deb9u4 Severity: wishlist Dear Maintainer, I happen to have a piece of hardware (Linksys WRT1200 AC) which runs stock Debian kernel flawlessly. There's one small detail that mars that experience - the absence of I2C LED driver for PCA9634. Sincerely yours, Reco -- Package-specific info: ** Version: Linux version 4.9.0-8-armmp (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.110-3+deb9u4 (2018-08-21) ** Command line: console=ttyS0,115200 root=/dev/mapper/xx-root ro quiet apparmor=1 security=apparmor ** Tainted: WO (4608) * Taint on warning. * Out-of-tree module has been loaded. ** Kernel log: Unable to read kernel log; any relevant messages should be attached ** Model information Hardware: Marvell Armada 380/385 (Device Tree) Revision: Device Tree model: Linksys WRT1200AC ** Loaded modules: tcp_diag inet_diag ctr ccm ip6t_MASQUERADE nf_nat_masquerade_ipv6 ip6table_nat nf_nat_ipv6 xt_TCPMSS xfrm4_tunnel ipcomp ebt_ip ebt_arp ebtable_filter ebtables 8021q garp mrp ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipt_REJECT nf_reject_ipv4 xt_mac xt_limit xt_owner xt_multiport xt_hashlimit xt_comment xt_mark xt_conntrack iptable_filter cls_fw ipt_MASQUERADE nf_nat_masquerade_ipv4 em_meta xt_nat cls_basic xt_tcpudp sch_htb iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack bridge stp llc sit af_key ah4 esp4 iptable_raw iptable_mangle ip_vti ip_tunnel echainiv authenc ansi_cprng drbg xfrm_ipcomp xfrm_user xfrm_algo tunnel4 xfrm4_mode_tunnel xfrm6_mode_tunnel arc4 sg ofpart pxa3xx_nand marvell_cesa tmp421 leds_gpio evdev orion_wdt des_generic mwlwifi(O) mac80211 cfg80211 auth_rpcgss oid_registry rfkill sunrpc ip_tables x_tables autofs4 crc32c_generic ext4 crc16 jbd2 fscrypto mbcache dm_mod sd_mod uas usb_storage ahci_mvebu libahci_platform libahci libata xhci_plat_hcd ehci_orion ehci_hcd phy_generic xhci_hcd usbcore scsi_mod mvmdio usb_common mvneta i2c_mv64xxx dsa_core ** PCI devices: 00:01.0 PCI bridge [0604]: Marvell Technology Group Ltd. Device [11ab:6820] (rev 04) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: 00:02.0 PCI bridge [0604]: Marvell Technology Group Ltd. Device [11ab:6820] (rev 04) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: 01:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88W8864 [Avastar] 802.11ac Wireless [11ab:2a55] Subsystem: Marvell Technology Group Ltd. 88W8864 [Avastar] 802.11ac Wireless [11ab:] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: mwlwifi Kernel modules: mwlwifi 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88W8864 [Avastar] 802.11ac Wireless [11ab:2a55] Subsystem: Marvell Technology Group Ltd. 88W8864 [Avastar] 802.11ac Wireless [11ab:] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: mwlwifi Kernel modules: mwlwifi ** USB devices: Bus 003 Device 002: ID 1058:25a2 Western Digital Technologies, Inc. Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 9.5 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: armhf (armv7l) Kernel: Linux 4.9.0-8-armmp (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.9.0-8-armmp depends on: ii initramfs-tools [linux-initramfs-tool] 0.130 ii kmod23-2 ii linux-base 4.5 Versions of packages linux-image-4.9.0-8-armmp recommends: pn firmware-linux-free ii irqbalance 1.1.0-2.3 Versions of packages linux-image-4.9.0-8-armmp suggests: pn debian-kernel-handbook pn linux-doc-4.9 Versi
Bug#908192: Acknowledgement (linux-image-4.18.0-1-amd64: After upgrade kernel to linux-image-4.18.0-1-amd64, LXC can not start)
I can start privileged LXC containers with 4.18 kernel, Only can not start unprivileged LXC containers with 4.18 kernel. Maybe the problem is lxc, not the kernel, https://lists.linuxfoundation.org/pipermail/containers/2018-June/039174.html -- Key fingerprint: CDB3 6C62 254B C088 1E5D DD32 182C 97DB CF2C 80AC
Bug#907175: 4.9.0-8-686-pae swapon failed invalid argument
Hi We are also getting this bug where swapon failed at boot with latest kernel 4.9.0-8-686-pae on 32bit i386 Debian 9.4 VMs on VMware VM version 11 on ESX 6.0 I get this in syslog: swapon[319]: swapon: /dev/sdb1: swapon failed: Invalid argument Fixed it for now by downgrading metapackage linux-image-686-pae to previous version as follows: apt-get install linux-image-686-pae=4.9+80+deb9u5 which auto installs: linux-image-4.9.0-7-686-pae:i386 Then I did : apt-get remove linux-image-4.9.0-8-686-pae and re-booted HELP! Does anyone know how to pin the metapackage so unattended-upgrades does not re-install : linux-image-686-pae:i386=4.9+80+deb9u6 and the faulty linux-image-4.9.0-8-686-pae Thanks Will Salmon, Systems & Infrastructure Support Officer (Linux servers), Faculty of Medical Sciences, Learning Technology Support Unit, Ridley Building 1 (floor 3) Newcastle University, Newcastle-upon-Tyne, UK, NE1 7RU (0191) 208 4539 : E-mail: will.sal...@ncl.ac.uk
Bug#905574: marked as done (linux-image-4.17.0-0.bpo.1-amd64: cryptsetup missing in intitramfs for kernel 4.17)
Your message dated Fri, 07 Sep 2018 16:39:06 +0200 with message-id <1536331146.7596.5.ca...@computer42.org> and subject line Re: Bug#905574: linux-image-4.17.0-0.bpo.1-amd64: cryptsetup missing in intitramfs for kernel 4.17 has caused the Debian Bug report #905574, regarding linux-image-4.17.0-0.bpo.1-amd64: cryptsetup missing in intitramfs for kernel 4.17 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 905574: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=905574 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: src:linux Version: 4.17.8-1~bpo9+1 Severity: critical Dear Maintainer, after switching 4.16 to 4.17 (strech-backport) my system rendered unusable, because the encrypted disk is not unlocked any more. The dialog is missing. Inspecting the initramfs shows that the cryptsetup related parts are missing for 4.17, but still in the 4.16 kernel. I was able to mitigate the issue by use the cryptsetup packages from buster. -- Package-specific info: ** Version: Linux version 4.17.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1)) #1 SMP Debian 4.17.8-1~bpo9+1 (2018-07-23) ** Command line: BOOT_IMAGE=/vmlinuz-4.17.0-0.bpo.1-amd64 root=/dev/mapper/system-root ro net.ifnames=0 quiet splash ** Not tainted ** Kernel log: Unable to read kernel log; any relevant messages should be attached ** Model information sys_vendor: Hewlett-Packard product_name: HP EliteBook Revolve 810 G3 product_version: A3009FD18203 chassis_vendor: Hewlett-Packard chassis_version: bios_vendor: Hewlett-Packard bios_version: M86 Ver. 01.16 board_vendor: Hewlett-Packard board_name: 22FB board_version: KBC Version 04.27 ** Loaded modules: fuse rfcomm ctr ccm cpufreq_powersave cpufreq_userspace cpufreq_conservative cmac bnep hid_multitouch hid_sensor_rotation hid_sensor_incl_3d hid_sensor_magn_3d hid_sensor_als hid_sensor_accel_3d hid_sensor_gyro_3d hid_sensor_trigger hid_sensor_iio_common industrialio_triggered_buffer btusb btrtl btbcm btintel bluetooth uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev drbg media ansi_cprng cdc_ether ecdh_generic qcserial usbnet usb_wwan mii usbserial binfmt_misc ipt_REJECT nf_reject_ipv4 nf_log_ipv4 nf_log_common xt_LOG iTCO_wdt iTCO_vendor_support arc4 xt_limit xt_tcpudp xt_addrtype nf_conntrack_ipv4 nf_defrag_ipv4 iwlmvm intel_rapl x86_pkg_temp_thermal xt_conntrack intel_powerclamp mac80211 kvm_intel kvm irqbypass intel_cstate intel_uncore intel_rapl_perf snd_hda_codec_hdmi joydev hp_wmi snd_hda_codec_realtek iwlwifi wmi_bmof snd_hda_codec_generic serio_raw pcspkr sg snd_hda_intel rtsx_pci_ms cfg80211 memstick snd_hda_codec snd_hda_core rfkill tpm_infineon snd_hwdep snd_pcm snd_timer snd mei_me soundcore lpc_ich shpchp mei battery tpm_tis acpi_als tpm_tis_core intel_vbtn kfifo_buf sparse_keymap tpm soc_button_array rng_core industrialio hp_wireless ac evdev ip6table_filter ip6_tables nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_nat nf_conntrack_ftp nf_conntrack crc32c_generic iptable_filter sunrpc coretemp lp parport loop cdc_wdm ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 fscrypto algif_skcipher af_alg raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear md_mod sha256_ssse3 dm_crypt dm_mod sd_mod hid_sensor_custom hid_sensor_hub hid_generic usbhid hid rtsx_pci_sdmmc mmc_core crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper ahci xhci_pci libahci psmouse i915 i2c_i801 i2c_algo_bit libata ehci_pci drm_kms_helper scsi_mod ehci_hcd xhci_hcd rtsx_pci e1000e usbcore drm usb_common thermal wmi video button ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Broadwell-U Host Bridge -OPI [8086:1604] (rev 09) Subsystem: Hewlett-Packard Company Broadwell-U Host Bridge -OPI [103c:22fb] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: bdw_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation HD Graphics 5500 [8086:1616] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company HD Graphics 5500 [103c:22fb] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver
Re: Bug#906189: linux-image-4.17.0-1-amd64: Laptop does not suspend in 4.17 - worked up to 4.16
On Fri, 2018-09-07 at 09:32 +0200, Christoph Haas wrote: > Does it suffice to know that the problem does not occur any more with > kernel 4.19.0-rc2+? > IMO, if the issue is not seen with 4.19, you may want to continue test and ensure that, till the final 4.19 release. Given that 4.19 is going to be the next LTS kernel, it is the one that should end in Debian Buster, probably. > I could continue with the "git bisect" but it would take days. :( -- Given the large number of mailing lists I follow, I request you to CC me in replies for quicker response
Bug#908248: linux-image-amd64: udev hung due to CCP, long shutdown due to process stuck
Package: linux-image-amd64 Version: 4.18+98 Severity: important Issue apply to testing kernel 4.17.*, kernel 4.18 installed to proof the issue was not solved in newer kernel release. Due to the process hung the shutdown of the system takes 5 - 10 minutes where message about "dead" udev process is printed into terminal. No other issues currently visible. [ 242.542652] INFO: task systemd-udevd:644 blocked for more than 120 seconds. [ 242.542658] Not tainted 4.18.0-1-amd64 #1 Debian 4.18.6-1 [ 242.542660] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 242.542662] systemd-udevd D0 644619 0x8124 [ 242.542665] Call Trace: [ 242.542674] ? __schedule+0x2b7/0x880 [ 242.542678] ? __wake_up_common_lock+0x89/0xc0 [ 242.542680] schedule+0x28/0x80 [ 242.542691] __sev_do_cmd_locked+0x1f0/0x270 [ccp] [ 242.542694] ? finish_wait+0x80/0x80 [ 242.542700] sev_do_cmd+0x2a/0x40 [ccp] [ 242.542702] ? 0xc088 [ 242.542707] sev_get_api_version+0x34/0xa0 [ccp] [ 242.542713] ? sp_get_psp_master_device+0x63/0x80 [ccp] [ 242.542717] psp_pci_init+0x43/0x220 [ccp] [ 242.542719] ? 0xc088 [ 242.542724] sp_mod_init+0x16/0x1000 [ccp] [ 242.542728] do_one_initcall+0x46/0x1c8 [ 242.542731] ? free_unref_page_commit+0x95/0x120 [ 242.542733] ? _cond_resched+0x15/0x40 [ 242.542736] ? kmem_cache_alloc_trace+0x15d/0x1c0 [ 242.542739] ? do_init_module+0x22/0x201 [ 242.542741] do_init_module+0x5b/0x201 [ 242.542743] load_module.constprop.56+0x1649/0x1d80 [ 242.542746] ? vfs_read+0x113/0x130 [ 242.542748] ? vfs_read+0x113/0x130 [ 242.542750] ? __do_sys_finit_module+0xe9/0x110 [ 242.542752] __do_sys_finit_module+0xe9/0x110 [ 242.542755] do_syscall_64+0x55/0x110 [ 242.542758] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 242.542761] RIP: 0033:0x7f45ce4f6a79 [ 242.542761] Code: Bad RIP value. [ 242.542768] RSP: 002b:7fff05345988 EFLAGS: 0246 ORIG_RAX: 0139 [ 242.542770] RAX: ffda RBX: 562209a42c80 RCX: 7f45ce4f6a79 [ 242.542771] RDX: RSI: 7f45ce1fe0ed RDI: 0007 [ 242.542772] RBP: 7f45ce1fe0ed R08: R09: [ 242.542773] R10: 0007 R11: 0246 R12: [ 242.542774] R13: 562209a40300 R14: 0002 R15: 562209a5a6e0 HW info: MSI X370 XPOWER GAMING TITANIUM (MS-7A31) CPU: Ryzen 1700x BIOS setting: default BIOS release: 1.G0 / 07/12/2018 (tested with N-1 version) -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (850, 'testing'), (300, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 4.18.0-1-amd64 (SMP w/16 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages linux-image-amd64 depends on: ii linux-image-4.18.0-1-amd64 4.18.6-1 linux-image-amd64 recommends no packages. linux-image-amd64 suggests no packages. -- no debconf information
