Bug#917527: linux-image-4.18.0-0.bpo.3-amd64: i915 module loading hangs
Package: src:linux Version: 4.18.20-2~bpo9+1 Severity: critical Justification: breaks the whole system Hi, After upgrading from bpo.1, my system is unusable with a black screen. The blackscreen starts at boot time (way before kdm), when the resolution usually changes. Using another computer, I was able to login remotely. I can observe that i915 does not load. Trying to load it with modprobe or even with insmod leads to the command hanging (C-c is able to stop it). I looked insmod with strace. The hang occurs in finit_module. I see nothing with dmesg nor in /var/log/syslog I workaround the problem by installing the current kernel (from testing), it 4.19.0-1-amd64 Regards, Vincent -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: EG45M-DS2H product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: F5C N:071209 board_vendor: Gigabyte Technology Co., Ltd. board_name: EG45M-DS2H board_version: ** Network interface configuration: auto lo iface lo inet loopback iface static inet static address 192.168.1.7 network 192.168.1.0 netmask 255.255.255.0 broadcast 192.168.1.255 dns-search varennes.fr iface dhcp inet dhcp iface aure inet dhcp pre-up ifconfig $IFACE up pre-up iwlist $IFACE scan wireless-essid Aure wireless-key ** wireless-channel 11 wireless-ap F2:AD:66:40:52:E8 iface dino inet dhcp wireless-mode managed wireless-essid dino wireless-key1 ** ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03) Subsystem: Gigabyte Technology Co., Ltd GA-EP45-DS5/GA-EG45M-DS2H Motherboard [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e22] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd GA-EG45M-DS2H Mainboard [1458:d000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e23] (rev 03) Subsystem: Gigabyte Technology Co., Ltd GA-EG45M-DS2H Mainboard [1458:d000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] Subsystem: Gigabyte Technology C
Processed: forcibly merging 914495 917527
Processing commands for cont...@bugs.debian.org:
> forcemerge 914495 917527
Bug #914495 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: does not boot here [i915 gen4/gen5]
Bug #914980 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: does not boot here [i915 gen4/gen5]
Bug #915178 {Done: Salvatore Bonaccorso } [src:linux] i915:
unable to handle kernel NULL pointer dereference at 0008
Bug #915641 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: driver i915 crashed on GM45 chipset.
Bug #915645 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Kernel 4.18-0-3 boots to a blank screen
Bug #915674 {Done: Salvatore Bonaccorso } [src:linux] i915
driver crash on kernel 4.18.0-3 (buster/testing)
Bug #915954 {Done: Salvatore Bonaccorso } [src:linux]
inteldrmfb: screen black in 4.18.0-3 (works in 4.18.0-2)
Bug #916090 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Kernel update makes system unbootable: kernel-oops
when loading "i915" module
Bug #916656 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: (i915?) BUG: unable to handle kernel NULL pointer
dereference at 0008
Bug #916718 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Booting on Thinkpad X300 leave screen black (NULL
pointer dereference in i915 drm driver)
Bug #916899 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-0.bpo.3-amd64: NULL pointer dereference in i915
Bug #917280 {Done: Salvatore Bonaccorso } [src:linux]
Linux-4.18.20 fail to boot on old intel gfx card
Bug #917527 [src:linux] linux-image-4.18.0-0.bpo.3-amd64: i915 module loading
hangs
Set Bug forwarded-to-address to
'https://bugs.freedesktop.org/show_bug.cgi?id=108850'.
Severity set to 'important' from 'critical'
Marked Bug as done
Marked as fixed in versions linux/4.19~rc2-1~exp1.
Marked as found in versions linux/4.18.20-2 and linux/4.18.20-1.
Added tag(s) fixed-upstream.
Bug #914980 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: does not boot here [i915 gen4/gen5]
Bug #915178 {Done: Salvatore Bonaccorso } [src:linux] i915:
unable to handle kernel NULL pointer dereference at 0008
Bug #915641 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: driver i915 crashed on GM45 chipset.
Bug #915645 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Kernel 4.18-0-3 boots to a blank screen
Bug #915674 {Done: Salvatore Bonaccorso } [src:linux] i915
driver crash on kernel 4.18.0-3 (buster/testing)
Bug #915954 {Done: Salvatore Bonaccorso } [src:linux]
inteldrmfb: screen black in 4.18.0-3 (works in 4.18.0-2)
Bug #916090 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Kernel update makes system unbootable: kernel-oops
when loading "i915" module
Bug #916656 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: (i915?) BUG: unable to handle kernel NULL pointer
dereference at 0008
Bug #916718 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Booting on Thinkpad X300 leave screen black (NULL
pointer dereference in i915 drm driver)
Bug #916899 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-0.bpo.3-amd64: NULL pointer dereference in i915
Bug #917280 {Done: Salvatore Bonaccorso } [src:linux]
Linux-4.18.20 fail to boot on old intel gfx card
Merged 914495 914980 915178 915641 915645 915674 915954 916090 916656 916718
916899 917280 917527
> thanks
Stopping processing here.
Please contact me if you need assistance.
--
914495: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914495
914980: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914980
915178: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915178
915641: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915641
915645: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915645
915674: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915674
915954: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915954
916090: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916090
916656: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916656
916718: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916718
916899: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916899
917280: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917280
917527: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917527
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
Bug#917533: linux-image-4.9.0-8-marvell: nfs-kernel-server leaks ports and triggers rkhunter/unhide-tcp
Package: src:linux
Version: 4.9.130-2
Severity: normal
Tags: upstream
Dear Maintainer,
Every few days rkhunter starts reporting in its daily report:
Warning: Hidden ports found:
Port number: TCP:697
Which corresponds to running unhide-tcp:
# unhide-tcp --lsof
Unhide-tcp 20130526
Copyright © 2013 Yago Jesus & Patrick Gouin
License GPLv3+ : GNU GPL version 3 or later
http://www.unhide-forensics.info
Used options: use_lsof
[*]Starting TCP checking
Found Hidden port that not appears in ss: 697
lsof reports :
[*]Starting UDP checking
root@armitage:~# unhide-tcp --netstat
Unhide-tcp 20130526
Copyright © 2013 Yago Jesus & Patrick Gouin
License GPLv3+ : GNU GPL version 3 or later
http://www.unhide-forensics.info
Used options: use_netscape
[*]Starting TCP checking
Found Hidden port that not appears in netstat: 697
Running `service nfs-kernel-server restart` clears it up for a day or two. I
think this corresponds to the report at https://lwn.net/Articles/648417/.
This report was gathered while running 4.9.130-2 but I had already installed
(but not rebooted into) a new locally rebooted version (4.9.144-1~hellion.0)
which corresponds to pkg-kernel git's stretch branch at d9cfad89feb2 ('Revert
"tracing: Use strlcpy() instead of strcpy() in __trace_find_cmdline()"') plus
backports of:
8d1b8c62e080 SUNRPC: Refactor TCP socket timeout code into a helper function
3ffbc1d65583 net/sunrpc/xprt_sock: fix regression in connection error reporting.
9b30889c548a SUNRPC: Ensure we always close the socket after a connection shuts
down
Where the first two are needed for a clean backport of the third which is:
commit 9b30889c548a4d45bfe6226e58de32504c1d682f
Author: Trond Myklebust
Date: Mon Feb 5 10:20:06 2018 -0500
SUNRPC: Ensure we always close the socket after a connection shuts down
Ensure that we release the TCP socket once it is in the TCP_CLOSE or
TCP_TIME_WAIT state (and only then) so that we don't confuse rkhunter
and its ilk.
Signed-off-by: Trond Myklebust
I have a second system, also armel, running the same kernel and also serving
NFS where this is not happening. It's logs lack the:
[83135.994133] nfsd: last server has exited, flushing export cache
[83137.951143] NFSD: starting 90-second grace period (net c0590248)
which is seen on this system and which I think might correspond to the issue
recurring. The other system is perhaps bit busier with NFS traffic overall.
One final piece of information is that I was previously running (for about a
month if my logs are to be believed) linux-image-4.9.0-0.bpo.8-marvell:armel
4.9.110-3+deb9u5~deb8u1 on Jessie userspace and this was not happening. It only
started when I upgraded to Stretch's userspace and kernel (4.9.130-2). I don't
immediately see anything in `git log v4.9.110..v4.9.130 -- net/sunrpc/` which
would explain the change though. The upgrade to stretch took rkhunter from
1.4.2-0.4+deb8u1 to 1.4.2-6+deb9u1, which did include a bump to the default
configuration file, although I also can't see a smoking gun there based on what
etckeeper says changed (but if I were a betting many I would guess it was a
change to the detection process which exposed this rather than a kernel
regression).
I'm next going to reboot into my locally built kernel with the (likely/hopeful)
fix applied. I'll follow up in a few days (maybe a week to be sure) if I don't
see this issue recurring. If it is looking positive at that point I'll also
ping davem and Trond to requests upstream backports.
Thanks,
Ian.
-- Package-specific info:
** Version:
Linux version 4.9.0-8-marvell (debian-kernel@lists.debian.org) (gcc version
6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 Debian 4.9.130-2 (2018-10-27)
** Command line:
console=ttyS0,115200 root=/dev/ram initrd=0xa0,0x90 ramdisk=32768
** Not tainted
** Kernel log:
[7.882180] raid6: using intx1 recovery algorithm
[7.903700] async_tx: api initialized (async)
[7.911087] xor: measuring software checksum speed
[7.955195]arm4regs : 725.000 MB/sec
[7.999190]8regs : 435.000 MB/sec
[8.043196]32regs: 633.000 MB/sec
[8.047417] xor: using function: arm4regs (725.000 MB/sec)
[8.097711] md: raid6 personality registered for level 6
[8.103102] md: raid5 personality registered for level 5
[8.108456] md: raid4 personality registered for level 4
[8.154600] md: raid10 personality registered for level 10
[8.423667] random: crng init done
[8.427094] random: 7 urandom warning(s) missed due to ratelimiting
[9.166444] EXT4-fs (dm-0): mounting ext3 file system using the ext4
subsystem
[9.200619] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
(null)
[ 12.160956] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[ 12.306034] m25p80 spi0.0: m25p128 (
Коммерческое предложение--Генеральному Директору
Продам рабочее оборудование! Станок трубонарезной 9м14.Год 1980.Цена 50 руб. Стaнок сверлильный Цена 5 руб. Токарно-винторезный 1м65.Год 1992.РМЦ-2800мм состояние нового.Цена 250 руб. Фaльцeпpoкaтный cтд-14.Год 1990.Цена 9 руб. Свapочный полуaвтомaт вду-506c и пдго-510.Год 2015.Цена 10 руб. Трубогиб до 120 трубы.Год 1991.Цена 17 руб. Листогиб ИВ1330.Год 1990.Цена 42 руб. Токарно-винторезный ТС-75.Год 1991.Цена 32 руб. Токарно-винторезный 16к20.Год 1991.Цена 32 руб. Печь обжига.Год 1990.Цена 12 руб. Станки шлифовальные 3а423,3в423.Год 1985.Цена 40 руб. Пpecc-ножницы c-229a.Год 1991.Цена 8 руб. Стaнок конcольно фpeзepный шиpокоунивepcaльный FSS-400.1992г.Цена 55 руб. Тeльфep 1т,3т.Цена 35000 руб. Унивepcaльно зaточной 3a64д.Год 1990.Цена 12 руб. Молот пневматический М-415a.Год 1990.Цена 35 руб. Аcфaльтoуклaдчик ДС-181.Год 2002.Цена 55 руб. Станок поперечно-строгальный 736.Год 1980.Цена 20 руб. Листогиб ERFURT PKXA 100X4000.Год 1990.Цена 45 руб. Токарно-винторезный 1м63.Год 1987.РМЦ-1500мм.Цена 35 руб. Рaдиaльнo cвepлильный 255.Год 1990.Цена 27 руб. Печь универсальная 04.02.26 пс новая.Год 2012.Цена 170 руб. Токарно-винторезный Gildemeister N.E.F plus 500.РМЦ-1500.Год 2000.Цена 90 руб. Радиально сверлильный ОС3000.Год 1991.Цена 35 руб. Станок обдирочно шлифовальный.Год 1990.Цена 4 руб. Рaдиaльнo cвepлильный 2л53у.Год 1990.Цена 17 руб. Гильотина Н3121.Год 1992.Цена 50 руб.Механическая. Вальцы 8х1500.Год 1990.Цена 30 руб. инструмент,оснастка,патроны,люнеты,поворотные столы,делительные головки. Токарно-винторезный 16в20.Год 1992.Цена 32 руб. Гaзopeзкa Цена 5 руб. Лeнточнaя пилa 250мм.Год 2000.Цена 8 руб. Вepтикaльнo pacтoчнoй 2a78Н.Год 1988.Цена 12 руб. Листогиб И2114.Год 1990.Цена 25 руб. Гоpизонтaльно-фpeзepный 6т82-1.Год 1992.Цена 25 руб. Рaдиaльнo cвepлильный 2532Л.Год 1990.Цена 27 руб. Стaнок конcольно фpeзepный шиpокоунивepcaльный FU-315/2w.Цена 45 руб. Гильoтинa 2х1000.Год 1990.Цена 7 руб. Токарно-винторезный cтaнoк 1к62.Год 1989.Цена 17 руб. Станок горизонтально фрезерный 6н82.Год 1990.Цена 15 руб. Вaльцы ИБ.Год 1982.Цена 60 руб. Компpeccоp c pecивepом гapaжный.Год 1990.Цена 5 руб. Вертикально сверлильный 2а135.Год 1980.Цена 10 руб. 891"3"19"7"1540
firmware-nonfree
Hi all, I know that's holidays, that's just a reminder to not forget to upload firmware-nonfree 20181218-1 into archives. The transition freeze for buster is soonish (it won't be blocking?). Nowadays, a lot of laptop or dev boards might require these firmware for some IP blocks. Enjoy your holidays, Regards, Romain
Bug#917524: initramfs-tools: Upgrade from initramfs-tools package fails
Sorry I forgot to include the actual install error message in the bug report. I'll do that now. apt full-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] Setting up initramfs-tools (0.132) ... update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools (0.132) ... update-initramfs: Generating /boot/initrd.img-4.19.0-1-amd64 mkinitramfs: failed to determine device for / mkinitramfs: workaround is MODULES=most, check: grep -r MODULES /etc/initramfs-tools Error please report bug on initramfs-tools Include the output of 'mount' and 'cat /proc/mounts' update-initramfs: failed for /boot/initrd.img-4.19.0-1-amd64 with 1. dpkg: error processing package initramfs-tools (--configure): installed initramfs-tools package post-installation script subprocess returned error exit status 1 Errors were encountered while processing: initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1) pgpUgGgSQkxvu.pgp Description: Digitale Signatur von OpenPGP
Bug#914495: Fixed in linux-image-4.19
Just installed it from testing distribution and no black screen, modeset worked fine.
Bug#916510: linux-image-4.18.0-3-amd64: Absolutely no video output after i915 module is initialize
this indeed seems to be fixed as of 4.19.0-1-amd64
Bug#916134: linux-image-4.18.0-3-amd64: 4.18.0-3 fails to boot, 0-2 works.
this seems to be fixed as of 4.19.0-1-amd64
Bug#917569: linux-image-4.19.0-1-686: fails to boot on i386 (Soekris net5501) BUG at arch/x86/mm/pat.c:549
Package: src:linux Version: 4.19.12-1 Severity: important Hi! After upgrading an i386 box (Soekris net5501) running testing (buster), I found out that the newly migrated Linux kernel fails to boot. Looking at the boot through the serial console reveals the attached output, in which I spotted the following line: [5.363599] kernel BUG at arch/x86/mm/pat.c:549! The previous kernel image (4.18.20-2) works with no issues. I have temporarily altered GRUB_DEFAULT in /etc/default/grub, in order to force the box to automatically boot that kernel version. I hope this bug may be fixed soon. Thanks a lot for any help you may provide! -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (800, 'testing'), (500, 'unstable') Architecture: i386 (i586) Kernel: Linux 4.18.0-3-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) LSM: AppArmor: enabled Loading Linux 4.19.0-1-686 ... Loading initial ramdisk ... [0.072516] ACPI BIOS Error (bug): A valid RSDP was not found (20180810/tbxfroot-210) [0.337287] Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline [5.363599] kernel BUG at arch/x86/mm/pat.c:549! [5.391321] invalid opcode: [#1] SMP [5.395287] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-1-686 #1 Debian 4.19.12-1 [5.395287] EIP: reserve_memtype+0x1a0/0x310 [5.395287] Code: ff 75 e4 e8 b2 4a fe ff 8b 4d d0 83 c4 0c 3c 06 0f 95 c0 0f b6 c0 01 c0 89 45 d4 e9 e5 fe ff ff 8d b4 26 00 00 00 00 8d 76 00 <0f> 0b 8d b6 00 00 00 00 83 7d 10 05 0f 84 41 01 00 00 83 7d 10 03 [5.395287] EAX: EBX: ce0ddef8 ECX: EDX: [5.395287] ESI: EDI: EBP: ce0ddeb8 ESP: ce0dde84 [5.395287] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210246 [5.395287] CR0: 80050033 CR2: CR3: 069e8000 CR4: 0090 [5.395287] Call Trace: [5.395287] ? walk_mem_res+0x3a/0x50 [5.395287] ? mm_fault_error.cold.33+0x37/0x37 [5.395287] __ioremap_caller+0xc1/0x2d0 [5.395287] ? net5501_init+0x36/0xed [5.395287] ? alix_init+0x103/0x103 [5.395287] ioremap_nocache+0x15/0x20 [5.395287] ? net5501_init+0x36/0xed [5.395287] net5501_init+0x36/0xed [5.395287] ? alix_init+0x103/0x103 [5.395287] do_one_initcall+0x42/0x19a [5.395287] ? do_early_param+0x7d/0x7d [5.395287] kernel_init_freeable+0x15b/0x1e3 [5.395287] ? rest_init+0x8a/0x8a [5.395287] kernel_init+0xd/0xea [5.395287] ret_from_fork+0x2e/0x38 [5.395287] Modules linked in: [6.123386] ---[ end trace c58e6b4182e68965 ]--- [6.151077] EIP: reserve_memtype+0x1a0/0x310 [6.176655] Code: ff 75 e4 e8 b2 4a fe ff 8b 4d d0 83 c4 0c 3c 06 0f 95 c0 0f b6 c0 01 c0 89 45 d4 e9 e5 fe ff ff 8d b4 26 00 00 00 00 8d 76 00 <0f> 0b 8d b6 00 00 00 00 83 7d 10 05 0f 84 41 01 00 00 83 7d 10 03 [6.289052] EAX: EBX: ce0ddef8 ECX: EDX: [6.326588] ESI: EDI: EBP: ce0ddeb8 ESP: c69ec3bc [6.364128] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210246 [6.404777] CR0: 80050033 CR2: CR3: 069e8000 CR4: 0090 [6.442406] Kernel panic - not syncing: Attempted to kill init! exitcode=0x000b [6.442406] [6.446292] Kernel Offset: 0x500 from 0xc100 (relocation range: 0xc000-0xd07f) [6.446292] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x000b [6.446292] ]--- [7.071650] clocksource: timekeeping watchdog on CPU0: Marking clocksource 'tsc-early' as unstable because the skew is too large: [7.141411] clocksource: 'pit' wd_now: eb0e884d wd_last: eb0535d3 mask: [7.197141] clocksource: 'tsc-early' cs_now: 4c0ed40b9 cs_last: 49481f99b mask: [7.261185] tsc: Marking TSC unstable due to clocksource watchdog [ 55.248323] random: crng init done
Bug#917524: initramfs-tools: Upgrade from initramfs-tools package fails
Control: reassign -1 udev Control: forcemerge 917261 -1 This looks like a known udev regression, which is fixed in version 240-2. Ben. -- Ben Hutchings Life is what happens to you while you're busy making other plans. - John Lennon signature.asc Description: This is a digitally signed message part
Processed: Re: Bug#917524: initramfs-tools: Upgrade from initramfs-tools package fails
Processing control commands:
> reassign -1 udev
Bug #917524 [initramfs-tools] initramfs-tools: Upgrade from initramfs-tools
package fails
Bug reassigned from package 'initramfs-tools' to 'udev'.
No longer marked as found in versions initramfs-tools/0.132.
Ignoring request to alter fixed versions of bug #917524 to the same values
previously set
> forcemerge 917261 -1
Bug #917261 {Done: Michael Biebl } [udev]
linux-image-4.19.0-1-amd64: /dev/mapper symlink for dm-crypt volume containing
/ not created on system startup
Bug #917124 {Done: Michael Biebl } [udev] lvm2 logical
volumes are not properly initialized
Bug #917136 {Done: Michael Biebl } [udev] udev: LVM volumes
fail to initialize properly with udev 240-1
Bug #917166 {Done: Michael Biebl } [udev] Errors on and after
upgrade to 2.03.01-2, swap on lvm not mounted
Bug #917524 [udev] initramfs-tools: Upgrade from initramfs-tools package fails
Set Bug forwarded-to-address to
'https://github.com/systemd/systemd/issues/11255'.
Severity set to 'grave' from 'important'
Marked Bug as done
Added indication that 917524 affects lvm2
Marked as fixed in versions systemd/240-2.
Marked as found in versions systemd/240-1.
Bug #917124 {Done: Michael Biebl } [udev] lvm2 logical
volumes are not properly initialized
Bug #917136 {Done: Michael Biebl } [udev] udev: LVM volumes
fail to initialize properly with udev 240-1
Bug #917166 {Done: Michael Biebl } [udev] Errors on and after
upgrade to 2.03.01-2, swap on lvm not mounted
Merged 917124 917136 917166 917261 917524
--
917124: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917124
917136: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917136
917166: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917166
917261: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917261
917524: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917524
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
Bug#916134: linux-image-4.18.0-3-amd64: 4.18.0-3 fails to boot, 0-2 works.
Control: forcemerge 914495 -1 I'm assuming this report is about the same bug as all the similar reports about i915 regressions in version 4.18.20, so I'm merging (and closing) it. The bug should be fixed in 4.19 which is now in testing. Ben. -- Ben Hutchings Life is what happens to you while you're busy making other plans. - John Lennon signature.asc Description: This is a digitally signed message part
Bug#916510: duplicate
Control: forcemerge 914495 -1 On Sat, 2018-12-15 at 09:26 +0100, Patrik Kluba wrote: > Sorry, just noticed that this report duplicates several other > reported bugs. > But also found a suspected solution elsewhere: > > https://bugs.freedesktop.org/show_bug.cgi?id=108984 > https://bugs.freedesktop.org/show_bug.cgi?id=108850 Assuming that this was the same bug, I'm merging your bug report with the others (and so closing it). Ben. -- Ben Hutchings Life is what happens to you while you're busy making other plans. - John Lennon signature.asc Description: This is a digitally signed message part
Processed: Re: Bug#916134: linux-image-4.18.0-3-amd64: 4.18.0-3 fails to boot, 0-2 works.
Processing control commands:
> forcemerge 914495 -1
Bug #914495 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: does not boot here [i915 gen4/gen5]
Bug #914980 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: does not boot here [i915 gen4/gen5]
Bug #915178 {Done: Salvatore Bonaccorso } [src:linux] i915:
unable to handle kernel NULL pointer dereference at 0008
Bug #915641 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: driver i915 crashed on GM45 chipset.
Bug #915645 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Kernel 4.18-0-3 boots to a blank screen
Bug #915674 {Done: Salvatore Bonaccorso } [src:linux] i915
driver crash on kernel 4.18.0-3 (buster/testing)
Bug #915954 {Done: Salvatore Bonaccorso } [src:linux]
inteldrmfb: screen black in 4.18.0-3 (works in 4.18.0-2)
Bug #916090 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Kernel update makes system unbootable: kernel-oops
when loading "i915" module
Bug #916656 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: (i915?) BUG: unable to handle kernel NULL pointer
dereference at 0008
Bug #916718 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Booting on Thinkpad X300 leave screen black (NULL
pointer dereference in i915 drm driver)
Bug #916899 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-0.bpo.3-amd64: NULL pointer dereference in i915
Bug #917280 {Done: Salvatore Bonaccorso } [src:linux]
Linux-4.18.20 fail to boot on old intel gfx card
Bug #917527 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-0.bpo.3-amd64: i915 module loading hangs
Bug #916134 [src:linux] linux-image-4.18.0-3-amd64: 4.18.0-3 fails to boot, 0-2
works.
Set Bug forwarded-to-address to
'https://bugs.freedesktop.org/show_bug.cgi?id=108850'.
Severity set to 'important' from 'normal'
Marked Bug as done
Marked as fixed in versions linux/4.19~rc2-1~exp1.
Marked as found in versions linux/4.18.20-2~bpo9+1 and linux/4.18.20-1.
Added tag(s) fixed-upstream.
Bug #914980 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: does not boot here [i915 gen4/gen5]
Bug #915178 {Done: Salvatore Bonaccorso } [src:linux] i915:
unable to handle kernel NULL pointer dereference at 0008
Bug #915641 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: driver i915 crashed on GM45 chipset.
Bug #915645 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Kernel 4.18-0-3 boots to a blank screen
Bug #915674 {Done: Salvatore Bonaccorso } [src:linux] i915
driver crash on kernel 4.18.0-3 (buster/testing)
Bug #915954 {Done: Salvatore Bonaccorso } [src:linux]
inteldrmfb: screen black in 4.18.0-3 (works in 4.18.0-2)
Bug #916090 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Kernel update makes system unbootable: kernel-oops
when loading "i915" module
Bug #916656 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: (i915?) BUG: unable to handle kernel NULL pointer
dereference at 0008
Bug #916718 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Booting on Thinkpad X300 leave screen black (NULL
pointer dereference in i915 drm driver)
Bug #916899 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-0.bpo.3-amd64: NULL pointer dereference in i915
Bug #917280 {Done: Salvatore Bonaccorso } [src:linux]
Linux-4.18.20 fail to boot on old intel gfx card
Bug #917527 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-0.bpo.3-amd64: i915 module loading hangs
Merged 914495 914980 915178 915641 915645 915674 915954 916090 916134 916656
916718 916899 917280 917527
--
914495: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914495
914980: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914980
915178: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915178
915641: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915641
915645: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915645
915674: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915674
915954: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915954
916090: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916090
916134: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916134
916656: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916656
916718: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916718
916899: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916899
917280: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917280
917527: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917527
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
Processed: Re: Bug#916510: duplicate
Processing control commands:
> forcemerge 914495 -1
Bug #914495 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: does not boot here [i915 gen4/gen5]
Bug #914980 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: does not boot here [i915 gen4/gen5]
Bug #915178 {Done: Salvatore Bonaccorso } [src:linux] i915:
unable to handle kernel NULL pointer dereference at 0008
Bug #915641 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: driver i915 crashed on GM45 chipset.
Bug #915645 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Kernel 4.18-0-3 boots to a blank screen
Bug #915674 {Done: Salvatore Bonaccorso } [src:linux] i915
driver crash on kernel 4.18.0-3 (buster/testing)
Bug #915954 {Done: Salvatore Bonaccorso } [src:linux]
inteldrmfb: screen black in 4.18.0-3 (works in 4.18.0-2)
Bug #916090 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Kernel update makes system unbootable: kernel-oops
when loading "i915" module
Bug #916134 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: 4.18.0-3 fails to boot, 0-2 works.
Bug #916656 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: (i915?) BUG: unable to handle kernel NULL pointer
dereference at 0008
Bug #916718 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Booting on Thinkpad X300 leave screen black (NULL
pointer dereference in i915 drm driver)
Bug #916899 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-0.bpo.3-amd64: NULL pointer dereference in i915
Bug #917280 {Done: Salvatore Bonaccorso } [src:linux]
Linux-4.18.20 fail to boot on old intel gfx card
Bug #917527 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-0.bpo.3-amd64: i915 module loading hangs
Bug #916510 [src:linux] linux-image-4.18.0-3-amd64: Absolutely no video output
after i915 module is initialized
Set Bug forwarded-to-address to
'https://bugs.freedesktop.org/show_bug.cgi?id=108850'.
Marked Bug as done
Marked as fixed in versions linux/4.19~rc2-1~exp1.
Marked as found in versions linux/4.18.20-2~bpo9+1 and linux/4.18.20-1.
Added tag(s) fixed-upstream.
Bug #914980 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: does not boot here [i915 gen4/gen5]
Bug #915178 {Done: Salvatore Bonaccorso } [src:linux] i915:
unable to handle kernel NULL pointer dereference at 0008
Bug #915641 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: driver i915 crashed on GM45 chipset.
Bug #915645 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Kernel 4.18-0-3 boots to a blank screen
Bug #915674 {Done: Salvatore Bonaccorso } [src:linux] i915
driver crash on kernel 4.18.0-3 (buster/testing)
Bug #915954 {Done: Salvatore Bonaccorso } [src:linux]
inteldrmfb: screen black in 4.18.0-3 (works in 4.18.0-2)
Bug #916090 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Kernel update makes system unbootable: kernel-oops
when loading "i915" module
Bug #916134 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: 4.18.0-3 fails to boot, 0-2 works.
Bug #916656 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: (i915?) BUG: unable to handle kernel NULL pointer
dereference at 0008
Bug #916718 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-3-amd64: Booting on Thinkpad X300 leave screen black (NULL
pointer dereference in i915 drm driver)
Bug #916899 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-0.bpo.3-amd64: NULL pointer dereference in i915
Bug #917280 {Done: Salvatore Bonaccorso } [src:linux]
Linux-4.18.20 fail to boot on old intel gfx card
Bug #917527 {Done: Salvatore Bonaccorso } [src:linux]
linux-image-4.18.0-0.bpo.3-amd64: i915 module loading hangs
Merged 914495 914980 915178 915641 915645 915674 915954 916090 916134 916510
916656 916718 916899 917280 917527
--
914495: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914495
914980: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914980
915178: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915178
915641: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915641
915645: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915645
915674: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915674
915954: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=915954
916090: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916090
916134: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916134
916510: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916510
916656: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916656
916718: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916718
916899: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916899
917280: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917280
917527: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917527
Debian Bug Tra
Processed: unmerging 917524, reassign 917524 to initramfs-tools-core
Processing commands for cont...@bugs.debian.org:
> unmerge 917524
Bug #917524 {Done: Michael Biebl } [udev] initramfs-tools:
Upgrade from initramfs-tools package fails
Bug #917124 {Done: Michael Biebl } [udev] lvm2 logical
volumes are not properly initialized
Bug #917136 {Done: Michael Biebl } [udev] udev: LVM volumes
fail to initialize properly with udev 240-1
Bug #917166 {Done: Michael Biebl } [udev] Errors on and after
upgrade to 2.03.01-2, swap on lvm not mounted
Bug #917261 {Done: Michael Biebl } [udev]
linux-image-4.19.0-1-amd64: /dev/mapper symlink for dm-crypt volume containing
/ not created on system startup
Disconnected #917524 from all other report(s).
> reassign 917524 initramfs-tools-core 0.132
Bug #917524 {Done: Michael Biebl } [udev] initramfs-tools:
Upgrade from initramfs-tools package fails
Bug reassigned from package 'udev' to 'initramfs-tools-core'.
No longer marked as found in versions systemd/240-1.
No longer marked as fixed in versions systemd/240-2.
Bug #917524 {Done: Michael Biebl } [initramfs-tools-core]
initramfs-tools: Upgrade from initramfs-tools package fails
Marked as found in versions initramfs-tools/0.132.
> thanks
Stopping processing here.
Please contact me if you need assistance.
--
917124: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917124
917136: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917136
917166: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917166
917261: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917261
917524: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=917524
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
