Bug#927825: arm: mvneta driver used on Armada XP GP boards does not receive packets (regression from 4.9)
Hi, On 2019-05-01 00:04, Aurelien Jarno wrote: > On 2019-04-30 10:12, Uwe Kleine-König wrote: > > > > More precisely the board is a "Marvell Armada XP Development Board > > > > DB-MV784MP-GP" > > > > > > > > > anymore. Using tcpdump on both the buildd and a remote host, it > > > > > appears > > > > > that the packets correctly leave the board and that the reception side > > > > > fails. > > > > If you can send to a remote host at least ARP (or ND) must be working, > > so some reception still works, right? > > I have to try again, but what i have seen is the ARP requests from > hartmann arriving to the other hosts on the subnet. Steve McIntyre > (added in Cc:) confirmed me on IRC being able to reproduce the issue on > another board. I confirm that. Basically on the other hosts of the same subnet, I can see the ARP requests: 18:23:45.979860 ARP, Request who-has 172.28.17.1 tell 172.28.17.18, length 46 18:23:47.002990 ARP, Request who-has 172.28.17.1 tell 172.28.17.18, length 46 18:23:48.027262 ARP, Request who-has 172.28.17.1 tell 172.28.17.18, length 46 18:23:52.004248 ARP, Request who-has 172.28.17.1 tell 172.28.17.18, length 46 18:23:53.019252 ARP, Request who-has 172.28.17.1 tell 172.28.17.18, length 46 18:23:54.043276 ARP, Request who-has 172.28.17.1 tell 172.28.17.18, length 46 18:23:58.027937 ARP, Request who-has 172.28.17.1 tell 172.28.17.18, length 46 172.28.17.1 is the gateway, 172.28.17.18 is hartmann.d.o. > > Is it possible to test a few things on hartmann? I'd suggest: > > > > - try (vanilla) 5.1-rc6 with MVNETA=y I have tried 5.1-rc7 with: CONFIG_MVNETA_BM_ENABLE=y CONFIG_MVNETA=y CONFIG_MVNETA_BM=y and also with CONFIG_MVNETA_BM_ENABLE=m CONFIG_MVNETA=m CONFIG_MVNETA_BM=m And the mvneta network driver is not able to receive data in both cases. Best regards, Aurelien -- Aurelien Jarno GPG: 4096R/1DDD8C9B aurel...@aurel32.net http://www.aurel32.net signature.asc Description: PGP signature
Bug#912137: marked as done (Acer C740 hanging with kernel 4.18.0-0.bpo.1-amd64 from Stretch backports)
Your message dated Wed, 01 May 2019 14:19:58 +0100 with message-id and subject line Re: Bug#912137: Acer C740 hanging with kernel 4.18.0-0.bpo.1-amd64 from Stretch backports has caused the Debian Bug report #912137, regarding Acer C740 hanging with kernel 4.18.0-0.bpo.1-amd64 from Stretch backports to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 912137: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=912137 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems --- Begin Message --- Package: linux-image-4.18.0-0.bpo.1-amd64 Version: 4.18.6-1~bpo9+1 Just to check if there are any problems, I upgraded on my Acer C740 running Debian Stretch linux-image-4.9.0-8-amd64 (4.9.110-3+deb9u6) to linux-image-4.18.0-0.bpo.1-amd64 from Stretch backports. Also firmware-iwlwifi (20180825+dfsg-1~bpo9+1) got installed. A few minutes after reboot my host hang completely and I needed to reboot it again. This happened a few times more and I had to go back to perfectly working linux-image-4.9.0-8-amd64. Below is some info about my environment. I hope that this issue can be fixed before next Debian stable comes out. Let me know if more information is needed. -- Juha - $ uname Linux trout 4.18.0-0.bpo.1-amd64 #1 SMP Debian 4.18.6-1~bpo9+1 (2018-09-13) x86_64 GNU/Linux # lshw trout description: Laptop product: Auron_Paine vendor: GOOGLE version: 1.0 serial: 123456789 width: 64 bits capabilities: smbios-2.7 dmi-2.7 smp vsyscall32 configuration: boot=normal chassis=laptop *-core description: Motherboard product: Auron_Paine vendor: GOOGLE physical id: 0 version: 1.0 serial: 123456789 *-firmware description: BIOS vendor: coreboot physical id: 0 version: MrChromebox date: 02/04/2018 size: 1MiB capacity: 8128KiB capabilities: pci pcmcia upgrade bootselect acpi *-cpu:0 DISABLED description: CPU [empty] vendor: GenuineIntel physical id: 4 version: Intel(R) Celeron(R) CPU 3215U @ 1.70GHz configuration: cores=16 *-memory description: System Memory physical id: 5 slot: System board or motherboard size: 4GiB *-bank:0 description: DDR3 Synchronous 1600 MHz (0.6 ns) product: HMT425S6CFR6A-PB vendor: Hynix/Hyundai physical id: 0 serial: None slot: Channel-0-DIMM-0 size: 2GiB width: 64 bits clock: 1600MHz (0.6ns) *-bank:1 description: DDR3 Synchronous 1600 MHz (0.6 ns) product: HMT425S6CFR6A-PB vendor: Hynix/Hyundai physical id: 1 serial: None slot: Channel-1-DIMM-0 size: 2GiB width: 64 bits clock: 1600MHz (0.6ns) *-cpu:1 product: Intel(R) Celeron(R) CPU 3215U @ 1.70GHz vendor: Intel Corp. physical id: 1 bus info: cpu@0 size: 1689MHz capacity: 1700MHz width: 64 bits capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer xsave rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust erms invpcid rdseed intel_pt xsaveopt dtherm ida arat pln pts cpufreq *-pci description: Host bridge product: Broadwell-U Host Bridge -OPI vendor: Intel Corporation physical id: 100 bus info: pci@:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=bdw_uncore resources: irq:0 *-display description: VGA compatible controller product: HD Graphics vendor: Intel Corporation physical id: 2 bus info: pci@:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46
Bug#925496: Fix available upstream
Control: tag -1 pending On Wed, 2019-05-01 at 14:04 +0100, Mike Crowe wrote: > Control: tags -1 + fixed-upstream > > The workaround is included in upstream v4.19.35 onwards: > b787544dc5e707fec86161b881391eb9342806e6. This will be in the next update, as we've already rebased on 4.19.37. Ben. -- Ben Hutchings Anthony's Law of Force: Don't force it, get a larger hammer. signature.asc Description: This is a digitally signed message part
Processed: Re: Bug#925496: Fix available upstream
Processing control commands: > tag -1 pending Bug #925496 [src:linux] linux-image-4.19.0-2-amd64: Latency increase with r8169 and default coalescing settings Added tag(s) pending. -- 925496: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=925496 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
Processed: Fix available upstream
Processing control commands: > tags -1 + fixed-upstream Bug #925496 [src:linux] linux-image-4.19.0-2-amd64: Latency increase with r8169 and default coalescing settings Added tag(s) fixed-upstream. -- 925496: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=925496 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
Bug#925496: Fix available upstream
Control: tags -1 + fixed-upstream The workaround is included in upstream v4.19.35 onwards: b787544dc5e707fec86161b881391eb9342806e6. Mike.
Processed: closing 916947
Processing commands for cont...@bugs.debian.org: > close 916947 4.19.12-1~bpo9+1 Bug #916947 [src:linux] linux-image-4.18.0-0.bpo.3-amd64: Can't get image/audio output from external monitor when the maximum resolution is set (1920x1080) (HDMI) Marked as fixed in versions linux/4.19.12-1~bpo9+1. Bug #916947 [src:linux] linux-image-4.18.0-0.bpo.3-amd64: Can't get image/audio output from external monitor when the maximum resolution is set (1920x1080) (HDMI) Marked Bug as done > thanks Stopping processing here. Please contact me if you need assistance. -- 916947: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=916947 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
Bug#912137: Acer C740 hanging with kernel 4.18.0-0.bpo.1-amd64 from Stretch backports
I installed 4.19.28-2~bpo9+1 and haven't encountered any hangs with it.
Bug#921019: arm64: Please provide sound modules for Allwinner A64 based systems
On Jo, 31 ian 19, 17:21:54, Harald Geyer wrote: > Please enable the following Kconfig symbols as modules: > > CONFIG_SND_SUN50I_CODEC_ANALOG > CONFIG_SND_SUN8I_CODEC > CONFIG_SND_SUN4I_I2S > CONFIG_SND_SOC_SIMPLE_AMPLIFIER > CONFIG_SND_SIMPLE_CARD > > These are necessary for sound support on pinebook, Olimex TERES-I, etc. > The drivers are available upstream since 4.20. > Pinebook has sound enabled in devicetree starting with 5.0 Would this enable also the S/PDIF or is something else needed (CONFIG_SND_SUN4I_SPDIF maybe?)? According to https://linux-sunxi.org/Linux_mainlining_effort#Status_Matrix the S/PDIF is available already in 4.17, so it would be nice to activate it also for the stable kernel. Thanks for considering, Andrei -- http://wiki.debian.org/FAQsFromDebianUser
