Package: linux-image-2.6.14-2-686
Version: 2.6.14-5
Severity: normal
*** Please type your report below this line ***
For me, personally, this is a critical bug as I use Linux on a notebook,
but I did not want to boost up the priority too much.
The "new" kernel (2.6.14-5) suspends (to RAM) as fine as the "old" one
(2.6.14-4), but resuming leaves me with a frozen sytem very often. Not
always, though, which will probably make it almost impossible to debug.
I usually resume twice or thrice a day. The old one failed to resume
about once every week or two. The new one failed every day (for three
or four days), so I will downgrade to the old one because I need a
working system over Christmas.
reportbug told me the following:
Getting status for linux-image-2.6.14-2-686...
Verifying package integrity...
There may be a problem with your installation of linux-image-2.6.14-2-686;
the following files appear to be missing or changed:
debsums: checksum mismatch linux-image-2.6.14-2-686 file
/lib/modules/2.6.14-2-686/modules.usbmap
debsums: checksum mismatch linux-image-2.6.14-2-686 file
/lib/modules/2.6.14-2-686/modules.inputmap
debsums: checksum mismatch linux-image-2.6.14-2-686 file
/lib/modules/2.6.14-2-686/modules.symbols
debsums: checksum mismatch linux-image-2.6.14-2-686 file
/lib/modules/2.6.14-2-686/modules.isapnpmap
debsums: checksum mismatch linux-image-2.6.14-2-686 file
/lib/modules/2.6.14-2-686/modules.alias
debsums: checksum mismatch linux-image-2.6.14-2-686 file
/lib/modules/2.6.14-2-686/modules.dep
debsums: checksum mismatch linux-image-2.6.14-2-686 file
/lib/modules/2.6.14-2-686/modules.ieee1394map
debsums: checksum mismatch linux-image-2.6.14-2-686 file
/lib/modules/2.6.14-2-686/modules.seriomap
debsums: checksum mismatch linux-image-2.6.14-2-686 file
/lib/modules/2.6.14-2-686/modules.pcimap
I have not touched these files. I installed
linux-wlan-ng-modules-2.6.14-2-686 and loop-aes-2.6.14-2-686. Does this
modify those files? However, I have not used any of those modules, yet,
and while suspending, they were not loaded.
I use the hibernate script (package hibernate) to suspend. I include
package info and config file below.
Regards, Thomas.
-- package infos:
> dpkg -s linux-wlan-ng-modules-2.6.14-2-686
Package: linux-wlan-ng-modules-2.6.14-2-686
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 540
Maintainer: Victor Seva <[EMAIL PROTECTED]>
Architecture: i386
Source: linux-wlan-ng
Version: 0.2.2+dfsg-7
Provides: linux-wlan-ng-0.2.2+dfsg-7-modules
Depends: linux-wlan-ng (>= 0.2.2+dfsg-7), linux-image-2.6.14-2-686
Description: [...]
> dpkg -s loop-aes-2.6.14-2-686
Package: loop-aes-2.6.14-2-686
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 296
Maintainer: Max Vozeler <[EMAIL PROTECTED]>
Architecture: i386
Source: loop-aes-modules
Version: 3.1b+8
Replaces: loop-aes-ciphers-2.6.14-2-686
Provides: loop-aes-modules
Depends: linux-image-2.6.14-2-686, loop-aes-utils (>= 2.12p-1)
Conflicts: loop-aes-ciphers-2.6.14-2-686
Description: [...]
> dpkg -s hibernate
Package: hibernate
Status: install ok installed
Priority: extra
Section: utils
Installed-Size: 328
Maintainer: Cameron Patrick <[EMAIL PROTECTED]>
Architecture: all
Version: 1.12-1
Replaces: suspend-script (<= 0.94-1)
Recommends: console-tools, vlock, hdparm
Suggests: dash, kernel-patch-suspend2
Conflicts: suspend-script (<= 0.94-1)
Conffiles:
/etc/hibernate/hibernate.conf 22aeaeb4c38fcb571092b42aea2ba307
/etc/hibernate/ram.conf a481debfb6ca12e21a3e6cf060024ab1
/etc/hibernate/blacklisted-modules 993850492860084b39aaa82a0b19cfe2
/etc/logrotate.d/hibernate 2e80912bbfb0ef68e8b17e36dbe0af0c
/etc/init.d/hibernate 8486dd47f75b0580ba7028323b4c3c33
Description: [...]
-- hibernate config file 1:
> cat /etc/hibernate/thm-suspend-to-ram.conf
Include /etc/hibernate/thm-suspend-common.conf
UseSysfsPowerState mem
### hardware_tweaks
RadeonTool yes
### xstatus
## This can be set to gnome, kde or x:
XStatus gnome
XSuspendText Suspend to RAM...
XResumeText Resuming from suspend to RAM...
-- hibernate config file 2:
> cat /etc/hibernate/thm-suspend-common.conf
# Example hibernate.conf file. Adapt to your own tastes.
# Options are not case sensitive.
#
# Run "hibernate -h" for help on the configuration items.
##
### Choose your Suspend method. You currently have 3 choices:
###
###suspend2Software Suspend 2 (requires kernel patches from
###http://www.suspend2.net/)
###
###sysfs_power_state Uses /sys/power/state to suspend (activates pmdisk
###on kernels < 2.6.8, or vanilla swsusp otherwise).
###
###acpi_sleep Uses /proc/acpi/sleep to activate swsusp, or other
###ACPI sleep state supported by your machine.
###
##
### suspend2