Bug#352997: linux-image-2.6.15-1-686: no eth0 at all
hi all, On Thu, Feb 23, 2006 at 12:20:09AM +0100, Daniel Ritz wrote: > > The network is ok now > > ...but, I don't have sound anymore: « > > eth0: 3Com 3c589, io 0x310, irq 5, hw_addr 00:00:86:52:4B:CB > > add the line: > exclude irq 5 > to /etc/pcmcia/config.opts. this will tell pcmcia not to use that irq line... $ dmesg |grep 3c589 eth0: 3Com 3c589, io 0x310, irq 3, hw_addr 00:00:86:52:4B:CB $ cat /proc/interrupts CPU0 0: 737471 XT-PIC timer 1: 1232 XT-PIC i8042 2: 0 XT-PIC cascade 3:237 XT-PIC pcmcia1.0 5: 3 XT-PIC soundblaster 7: 4 XT-PIC parport0 8: 4 XT-PIC rtc 9: 19 XT-PIC aha152x 11: 16630 XT-PIC uhci_hcd:usb1, yenta, yenta 12:100 XT-PIC i8042 14: 11865 XT-PIC ide0 15: 5572 XT-PIC ide1 NMI: 0 LOC: 0 ERR: 0 MIS: 0 very great!! Thanks a lot!! now, just stay a problem with my SCSI system before I can have a full use of 2.6: see: http://lists.infradead.org/pipermail/linux-pcmcia/2006-February/003263.html (or http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=348782 ). best regards, -- / \ ((__-^^-,-^^-__)) .''`. Philippe BOURCIER `-_---' `---_-' .-. : :' : http://bourcier.philippe.online.fr `--|o` 'o|--' /V\ `. `' \ ` / // \\ `- Linux Counter registered user #290012): :( /( )\ :o_o: ^^-^^ "-"
Bug#352997: linux-image-2.6.15-1-686: no eth0 at all
hi all, On Wed, Feb 22, 2006 at 09:42:36PM +0100, Daniel Ritz wrote: > your device has an incomplete CIS on the card and therefor needs an updated > one loaded. i think there's the problem... > get and extract the pcmcia-cs package, then do a: > cp etc/cis/3CXEM556.dat /lib/firmware/3CXEM556.cis > (note the change from .dat to .cis) $ sudo cp /etc/pcmcia/cis/3CXEM556.dat /lib/firmware/3CXEM556.cis $ ls -alg /lib/firmware/ total 16 drwxr-xr-x 2 root 4096 2006-02-22 22:21 ./ drwxr-xr-x 13 root 8192 2006-02-19 19:15 ../ -rw-r--r-- 1 root 134 2006-02-22 22:21 3CXEM556.cis $ /sbin/ifconfig eth0 Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx inet addr:xxx.xxx.x.x Bcast:xxx.xxx.x.xxx Mask:xxx.xxx.xxx.x inet6 addr: ::xxx:::/xx Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:196 errors:0 dropped:0 overruns:0 frame:0 TX packets:247 errors:0 dropped:0 overruns:0 carrier:0 collisions:2 txqueuelen:1000 RX bytes:65412 (63.8 KiB) TX bytes:21004 (20.5 KiB) Interrupt:5 Base address:0x310 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:278 (278.0 b) TX bytes:278 (278.0 b) great! thank you very much!! The network is ok now ...but, I don't have sound anymore: « eth0: 3Com 3c589, io 0x310, irq 5, hw_addr 00:00:86:52:4B:CB ... sb: Probing legacy card with io=220, irq=5, dma=3, dma16=5 SB 3.01 detected OK (220) SB: Can't allocate IRQ5 » $ dmesg Linux version 2.6.15-1-686 (Debian 2.6.15-6) ([EMAIL PROTECTED]) (gcc version 4.0.3 20060128 (prerelease) (Debian 4.0.2-8)) #1 Fri Feb 10 15:49:07 UTC 2006 BIOS-provided physical RAM map: BIOS-e801: - 0009f000 (usable) BIOS-e801: 0010 - 0800 (usable) 0MB HIGHMEM available. 128MB LOWMEM available. On node 0 totalpages: 32768 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 28672 pages, LIFO batch:7 HighMem zone: 0 pages, LIFO batch:0 DMI not present. Allocating PCI resources starting at 1000 (gap: 0800:f800) Built 1 zonelists Kernel command line: root=/dev/hda2 video=vesafb:ywrap,mtrr vga=791 noapic acpi=off ro Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to d000 (01101000) Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 300.700 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 122548k/131072k available (1425k kernel code, 8012k reserved, 530k data, 144k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 602.11 BogoMIPS (lpj=301056) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183f9ff CPU: After vendor identify, caps: 0183f9ff CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After all inits, caps: 0183f9ff 0040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) CPU: Intel Pentium II (Deschutes) stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 4387k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xeb080, last bus=0 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00ff020 PnPBIOS: PnP BIOS version 1.0, entry 0xec000:0x3d18, dseg 0xec000 PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by driver PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is :00:02.0 PCI quirk: region 1000-103f claimed by PIIX4 ACPI PCI quirk: region 1400-140f claimed by PIIX4 SMB PIIX4 devres C PIO at 0398-0399 PIIX4 devres E PIO at 0800-0807 PIIX4 devres I PIO at 0200-0201 PIIX4 devres J PIO at 0388-038b PCI: Using IRQ router PIIX/ICH [8086/7110] at :00:07.0 pnp: 00:01: ioport range 0xcf8-0xcff could not be reserved pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:01: ioport range 0x3f0-0x3f1
Bug#352997: linux-image-2.6.15-1-686: no eth0 at all
> The network is ok now > ...but, I don't have sound anymore: « > eth0: 3Com 3c589, io 0x310, irq 5, hw_addr 00:00:86:52:4B:CB add the line: exclude irq 5 to /etc/pcmcia/config.opts. this will tell pcmcia not to use that irq line... rgds -daniel
Bug#352997: linux-image-2.6.15-1-686: no eth0 at all
hi your device has an incomplete CIS on the card and therefor needs an updated one loaded. i think there's the problem... get and extract the pcmcia-cs package, then do a: cp etc/cis/3CXEM556.dat /lib/firmware/3CXEM556.cis (note the change from .dat to .cis) rgds -daniel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#352997: linux-image-2.6.15-1-686: no eth0 at all
hi all, On Sat, Feb 18, 2006 at 04:44:05PM +0100, maximilian attems wrote: > On Wed, 15 Feb 2006, Philippe Bourcier wrote: > > I never got my system full usable since 2.6... > > see #303550 and #321419 (pcmcia related problems) > > now, let's try to go forward: I don't have any network > > have you pcmciautils installed? $ COLUMNS=40 dpkg -l |grep pcmciautils ii pcmciautils012-3 PCMCIA utilities for Linux 2.6 > please send ouput of pccardctl: > pccardctl info $ sudo pccardctl info PRODID_1="Adaptec, Inc." PRODID_2="APA-1460 SCSI Host Adapter" PRODID_3="Version 0.01" PRODID_4="" MANFID=012f,0002 FUNCID=255 PRODID_1="3Com" PRODID_2="Megahertz 3CXEM556 B" PRODID_3="LAN + 56k Modem" PRODID_4="" MANFID=0101,0035 FUNCID=6 > also check out the sys tree below /sys/class/pcmcia_socket $ ls -algR /sys/class/pcmcia_socket /sys/class/pcmcia_socket: total 0 drwxr-xr-x 4 root 0 2006-02-20 10:44 ./ drwxr-xr-x 20 root 0 2006-02-20 10:45 ../ drwxr-xr-x 2 root 0 2006-02-20 10:52 pcmcia_socket0/ drwxr-xr-x 2 root 0 2006-02-20 10:52 pcmcia_socket1/ /sys/class/pcmcia_socket/pcmcia_socket0: total 0 drwxr-xr-x 2 root0 2006-02-20 10:52 ./ drwxr-xr-x 4 root0 2006-02-20 10:44 ../ -rw--- 1 root 4096 2006-02-20 10:52 available_resources_io -rw--- 1 root 4096 2006-02-20 10:52 available_resources_mem -rw--- 1 root 4096 2006-02-20 10:52 available_resources_setup_done --w--- 1 root 4096 2006-02-20 10:52 card_eject --w--- 1 root 4096 2006-02-20 10:50 card_insert -rw--- 1 root 4096 2006-02-20 10:52 card_irq_mask -r 1 root 4096 2006-02-20 10:52 card_type -r 1 root 4096 2006-02-20 10:52 card_vcc -r 1 root 4096 2006-02-20 10:52 card_voltage -r 1 root 4096 2006-02-20 10:52 card_vpp -rw-r--r-- 1 root 512 2006-02-20 10:52 cis lrwxrwxrwx 1 root0 2006-02-20 10:52 device -> ../../../devices/pci:00/:00:03.0/ --w--- 1 root 4096 2006-02-20 10:52 uevent /sys/class/pcmcia_socket/pcmcia_socket1: total 0 drwxr-xr-x 2 root0 2006-02-20 10:52 ./ drwxr-xr-x 4 root0 2006-02-20 10:44 ../ -rw--- 1 root 4096 2006-02-20 10:52 available_resources_io -rw--- 1 root 4096 2006-02-20 10:52 available_resources_mem -rw--- 1 root 4096 2006-02-20 10:52 available_resources_setup_done --w--- 1 root 4096 2006-02-20 10:52 card_eject --w--- 1 root 4096 2006-02-20 10:50 card_insert -rw--- 1 root 4096 2006-02-20 10:52 card_irq_mask -r 1 root 4096 2006-02-20 10:52 card_type -r 1 root 4096 2006-02-20 10:52 card_vcc -r 1 root 4096 2006-02-20 10:52 card_voltage -r 1 root 4096 2006-02-20 10:52 card_vpp -rw-r--r-- 1 root 512 2006-02-20 10:52 cis lrwxrwxrwx 1 root0 2006-02-20 10:52 device -> ../../../devices/pci:00/:00:03.1/ --w--- 1 root 4096 2006-02-20 10:52 uevent $ sudo cat /sys/class/pcmcia_socket/pcmcia_socket1/available_resources_io 0x0100 - 0x021f 0x0230 - 0x02ff 0x0308 - 0x0387 0x0390 - 0x04ff 0x0808 - 0x08ff 0x0a00 - 0x0aff 0x0c00 - 0x0cff [EMAIL PROTECTED]:~/tmp$ sudo cat /sys/class/pcmcia_socket/pcmcia_socket1/available_resources_mem 0x000c - 0x000f 0xa010 - 0xa0ff [EMAIL PROTECTED]:~/tmp$ sudo cat /sys/class/pcmcia_socket/pcmcia_socket1/available_resources_setup_done yes $ sudo cat /sys/class/pcmcia_socket/pcmcia_socket1/card_irq_mask 0x0628 [EMAIL PROTECTED]:~/tmp$ sudo cat /sys/class/pcmcia_socket/pcmcia_socket1/card_type 16-bit [EMAIL PROTECTED]:~/tmp$ sudo cat /sys/class/pcmcia_socket/pcmcia_socket1/card_vcc 5.0V [EMAIL PROTECTED]:~/tmp$ sudo cat /sys/class/pcmcia_socket/pcmcia_socket1/card_voltage 5.0V [EMAIL PROTECTED]:~/tmp$ sudo cat /sys/class/pcmcia_socket/pcmcia_socket1/card_vpp 5.0V $ sudo cat /sys/class/pcmcia_socket/pcmcia_socket1/cis �-3ComMegahertz 3CXEM556 BLAN + 56k Modem� 5cqU��m�]d0��C�� I hope the followings will be useful: $ sudo ./cbdump 00:03.0 CardBus bridge: Texas Instruments PCI1250 -- generic cardbus config registers Vendor ID [00] : 0x104c Device ID [02] : 0xac16 PCI command[04] : 0x0007 Base address [10] : 0x1801 Memory Base 0 [1c] : 0x1000 Memory Limit 0 [20] : 0x11fff000 Memory Base 1 [24] : 0x1200 Memory Limit 1 [28] : 0x13fff000 IO Base 0 [2c] : 0x1800 IO Limit 0 [30] : 0x18fc IO Base 1 [34] : 0x1c00 IO Limit 1 [38] : 0x1cfc Bridge control [3e] : 0x05c0 Subsystem vendor ID[40] : 0x Subsystem device ID[42] : 0x Legacy mode base [44] : 0x0001 -- TI specific config registers System control [80] : 0x0844f061 IRQ Mux[8c] : 0xcba97523 Retry [90] : 0xc0
Bug#352997: linux-image-2.6.15-1-686: no eth0 at all
On Wed, 15 Feb 2006, Philippe Bourcier wrote: > > I never got my system full usable since 2.6... > see #303550 and #321419 (pcmcia related problems) > now, let's try to go forward: I don't have any network have you pcmciautils installed? please send ouput of pccardctl: pccardctl info also check out the sys tree below /sys/class/pcmcia_socket -- maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#352997: linux-image-2.6.15-1-686: no eth0 at all
Package: linux-image-2.6.15-1-686 Version: 2.6.15-6 Severity: important I never got my system full usable since 2.6... see #303550 and #321419 (pcmcia related problems) now, let's try to go forward: I don't have any network dmesg: Linux version 2.6.15-1-686 (Debian 2.6.15-6) ([EMAIL PROTECTED]) (gcc version 4.0.3 20060128 (prerelease) (Debian 4.0.2-8)) #1 Fri Feb 10 15:49:07 UTC 2006 BIOS-provided physical RAM map: BIOS-e801: - 0009f000 (usable) BIOS-e801: 0010 - 0800 (usable) 0MB HIGHMEM available. 128MB LOWMEM available. On node 0 totalpages: 32768 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 28672 pages, LIFO batch:7 HighMem zone: 0 pages, LIFO batch:0 DMI not present. Allocating PCI resources starting at 1000 (gap: 0800:f800) Built 1 zonelists Kernel command line: root=/dev/hda2 video=vesafb:ywrap,mtrr vga=791 noapic acpi=off ro Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to d000 (01101000) Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 300.787 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 122548k/131072k available (1425k kernel code, 8012k reserved, 530k data, 144k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 602.13 BogoMIPS (lpj=301068) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183f9ff CPU: After vendor identify, caps: 0183f9ff CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After all inits, caps: 0183f9ff 0040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) CPU: Intel Pentium II (Deschutes) stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. checking if image is initramfs... it is Freeing initrd memory: 4387k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xeb080, last bus=0 PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00ff020 PnPBIOS: PnP BIOS version 1.0, entry 0xec000:0x3d18, dseg 0xec000 PnPBIOS: 19 nodes reported by PnP BIOS; 19 recorded by driver PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is :00:02.0 PCI quirk: region 1000-103f claimed by PIIX4 ACPI PCI quirk: region 1400-140f claimed by PIIX4 SMB PIIX4 devres C PIO at 0398-0399 PIIX4 devres E PIO at 0800-0807 PIIX4 devres I PIO at 0200-0201 PIIX4 devres J PIO at 0388-038b PCI: Using IRQ router PIIX/ICH [8086/7110] at :00:07.0 pnp: 00:01: ioport range 0xcf8-0xcff could not be reserved pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:01: ioport range 0x3f0-0x3f1 has been reserved pnp: 00:01: ioport range 0x3f3-0x3f3 has been reserved pnp: 00:01: ioport range 0x3f7-0x3f7 has been reserved pnp: 00:01: ioport range 0x1000-0x107f could not be reserved PCI: Bus 1, cardbus bridge: :00:03.0 IO window: 1800-18ff IO window: 1c00-1cff PREFETCH window: 1000-11ff MEM window: 1200-13ff PCI: Bus 5, cardbus bridge: :00:03.1 IO window: 2000-20ff IO window: 2400-24ff PREFETCH window: 1400-15ff MEM window: 1600-17ff PCI: Found IRQ 11 for device :00:03.0 PCI: Setting latency timer of device :00:03.0 to 64 PCI: Found IRQ 11 for device :00:03.1 PCI: Setting latency timer of device :00:03.1 to 64 audit: initializing netlink socket (disabled) audit(1140010665.559:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Limiting direct PCI/PCI transfers. vesafb: framebuffer at 0xc000, mapped to 0xc888, using 3072k, total 4096k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:7648 vesafb: pmi: set display start = c00c76aa, set palette = c00c76f3 vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1536 vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 vesafb: Mode is VGA compatible Console: switching to colour frame buffer device 128x48 fb0: