--- Begin Message ---
Package: linux-image-2.6.26-1-amd64
Version: 2.6.26-4
Severity: important
The forcedeth Ethernet driver don't work after a resume (suspend or hibernate):
no pings (from in or out), neither setting up nor setting down the interface
gave anything better,
in both static and dhcp configuration.
The device itself (perhaps because of the driver?) seems strange: when I plug
in an ethernet cable connected to another machine, the states LEDs get time to
be up, and the
activity LED remain on even if there is no network traffic. (Hum, it looks like
a busy interface, no?)
And finally, trying to remove the kernel module after a resume gave a full
kernel freeze, before any logging (logs doesn't contain anything about the
removal of the driver).
My motherboard is a Gigabyte GA-M57SLI-S4 (nVidia nForce 570 SLI Chipset) if it
helps.
Here the full lspci -vv of the incriminated device:
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3)
Subsystem: Giga-byte Technology Device e000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 1278
Region 0: Memory at fc107000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at e000 [size=8]
Region 2: Memory at fc108000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fc109000 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
Vector table: BAR=2 offset=00000000
PBA: BAR=3 offset=00000000
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3
Enable+
Address: 00000000fee0300c Data: 4199
Masking: 000000fe Pending: 00000001
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth
-- Package-specific info:
** Version:
Linux version 2.6.26-1-amd64 (Debian 2.6.26-4) (wa...@debian.org) (gcc version
4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Aug 28 11:13:42 UTC
2008
** Command line:
root=/dev/sda2 ro vga=0x369 quiet
** Tainted: P (1)
** Kernel log:
[ 320.345864] CPU0 attaching sched-domain:
[ 320.345867] domain 0: span 0-1
[ 320.345869] groups: 0 1
[ 320.345871] domain 1: span 0-1
[ 320.345873] groups: 0-1
[ 320.345876] CPU1 attaching sched-domain:
[ 320.345878] domain 0: span 0-1
[ 320.345880] groups: 1 0
[ 320.345882] domain 1: span 0-1
[ 320.345884] groups: 0-1
[ 320.261651] CPU1 is up
[ 320.261651] PM: Writing back config space on device 0000:00:00.0 at offset f
(was 0, writing ff)
[ 320.384799] Switched to high resolution mode on CPU 1
[ 320.397656] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23
(level, low) -> IRQ 23
[ 320.397661] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 320.437618] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22
(level, low) -> IRQ 22
[ 320.437622] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 320.453612] PM: Writing back config space on device 0000:00:05.0 at offset 1
(was b00000, writing b00007)
[ 320.453621] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 20
(level, low) -> IRQ 20
[ 320.453625] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 320.469661] PM: Writing back config space on device 0000:00:05.1 at offset 1
(was b00000, writing b00007)
[ 320.469670] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 23
(level, low) -> IRQ 23
[ 320.469675] PCI: Setting latency timer of device 0000:00:05.1 to 64
[ 320.485660] PM: Writing back config space on device 0000:00:05.2 at offset 1
(was b00000, writing b00007)
[ 320.485669] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 22
(level, low) -> IRQ 22
[ 320.485673] PCI: Setting latency timer of device 0000:00:05.2 to 64
[ 320.485702] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 320.501656] PM: Writing back config space on device 0000:00:06.1 at offset f
(was 5020200, writing 502020a)
[ 320.501664] PM: Writing back config space on device 0000:00:06.1 at offset 4
(was 0, writing fc100000)
[ 320.501668] PM: Writing back config space on device 0000:00:06.1 at offset 1
(was b00000, writing b00002)
[ 320.501678] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 21
(level, low) -> IRQ 21
[ 320.501683] PCI: Setting latency timer of device 0000:00:06.1 to 64
[ 320.605571] PM: Writing back config space on device 0000:00:08.0 at offset f
(was 14010100, writing 1401010f)
[ 320.605577] PM: Writing back config space on device 0000:00:08.0 at offset 7
(was 0, writing fc109000)
[ 320.605580] PM: Writing back config space on device 0000:00:08.0 at offset 6
(was 0, writing fc108000)
[ 320.605583] PM: Writing back config space on device 0000:00:08.0 at offset 5
(was 1, writing e001)
[ 320.605587] PM: Writing back config space on device 0000:00:08.0 at offset 4
(was 0, writing fc107000)
[ 320.605591] PM: Writing back config space on device 0000:00:08.0 at offset 1
(was b00000, writing b00007)
[ 320.606089] eth0: no link during initialization.
[ 320.606225] PM: Writing back config space on device 0000:00:0f.0 at offset 1
(was 100007, writing 100407)
[ 320.606237] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 320.621564] PM: Writing back config space on device 0000:01:08.0 at offset 1
(was 2900002, writing 2900006)
[ 320.621575] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16
(level, low) -> IRQ 16
[ 320.640190] PM: Writing back config space on device 0000:01:0a.0 at offset f
(was 4030100, writing 4030105)
[ 320.640200] PM: Writing back config space on device 0000:01:0a.0 at offset 5
(was 0, writing fc010000)
[ 320.640204] PM: Writing back config space on device 0000:01:0a.0 at offset 4
(was 0, writing fc014000)
[ 320.640208] PM: Writing back config space on device 0000:01:0a.0 at offset 3
(was 0, writing 2008)
[ 320.640213] PM: Writing back config space on device 0000:01:0a.0 at offset 1
(was 2100000, writing 2100006)
[ 320.704397] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]
MMIO=[fc014000-fc0147ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 320.704397] NVRM: RmPowerManagement: 5
[ 320.807425] ata2: SATA link down (SStatus 0 SControl 300)
[ 320.818105] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 320.870617] ata3: SATA link down (SStatus 0 SControl 300)
[ 320.870679] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 320.881015] ata5: SATA link down (SStatus 0 SControl 300)
[ 320.881233] ata4.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[ 320.892389] ata6: SATA link down (SStatus 0 SControl 300)
[ 320.931647] ata4.00: configured for UDMA/100
[ 321.363361] serial 00:07: current resources: pnp_start_dev
[ 321.363366] serial 00:07: irq 4 flags 0x401
[ 321.363369] serial 00:07: io 0x3f8-0x3ff flags 0x101
[ 321.363372] serial 00:07: set resources
[ 321.364281] serial 00:07: encode 2 resources
[ 321.364283] serial 00:07: encode io 0x3f8-0x3ff decode 0x1
[ 321.364286] serial 00:07: encode irq 4 edge high exclusive (2-byte
descriptor)
[ 321.364725] serial 00:07: activated
[ 321.364731] parport_pc 00:08: current resources: pnp_start_dev
[ 321.364733] parport_pc 00:08: irq 7 flags 0x401
[ 321.364736] parport_pc 00:08: io 0x378-0x37f flags 0x101
[ 321.364739] parport_pc 00:08: set resources
[ 321.365388] parport_pc 00:08: encode 2 resources
[ 321.365390] parport_pc 00:08: encode io 0x378-0x37f decode 0x1
[ 321.365393] parport_pc 00:08: encode irq 7 edge high exclusive (2-byte
descriptor)
[ 321.365786] parport_pc 00:08: activated
[ 322.171399] sd 0:0:0:0: [sda] Starting disk
[ 322.763388] ata1.00: NODEV after polling detection
[ 322.763391] ata1.00: revalidation failed (errno=-2)
[ 322.763393] ata1: failed to recover some devices, retrying in 5 secs
[ 328.087718] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 328.095772] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
[ 328.199713] ata1.00: configured for UDMA/133
[ 328.199800] sd 0:0:0:0: [sda] 312579695 512-byte hardware sectors (160041 MB)
[ 328.199822] sd 0:0:0:0: [sda] Write Protect is off
[ 328.199824] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 328.199859] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 328.249681] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 328.276314] hda: UDMA/33 mode selected
[ 328.283695] hda: Host Protected Area detected.
[ 328.283695] current capacity is 60034367 sectors (30737 MB)
[ 328.283695] native capacity is 60036480 sectors (30738 MB)
[ 328.283695] hda: Host Protected Area disabled.
[ 328.288018] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 328.288164] hdb: UDMA/33 mode selected
[ 328.288431] Restarting tasks ... done.
[ 366.104809] eth0: no IPv6 routers present
[ 406.709917] eth0: no IPv6 routers present
[ 415.723346] ADDRCONF(NETDEV_UP): ath0: link is not ready
[ 415.726163] ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
[ 426.234748] ath0: no IPv6 routers present
[ 1822.047538] npviewer.bin[6314]: segfault at f58d3030 ip f78ab4c0 sp ff842a6c
error 4 in libpthread-2.7.so[f78a4000+13000]
** Loaded modules:
Module Size Used by
nvidia 7638352 26
binfmt_misc 13580 1
rfcomm 38176 2
l2cap 23936 9 rfcomm
bluetooth 57124 4 rfcomm,l2cap
video 24084 0
output 7808 1 video
ac 9352 0
battery 16904 0
powernow_k8 17156 1
cpufreq_ondemand 11792 1
cpufreq_conservative 11784 0
cpufreq_stats 9120 0
cpufreq_powersave 6400 0
cpufreq_userspace 8452 0
freq_table 9344 3 powernow_k8,cpufreq_ondemand,cpufreq_stats
wlan_wep 9984 1
ipv6 288200 38
ext2 66448 1
nls_utf8 6272 1
nls_cp437 11136 1
vfat 14976 1
fat 51128 1 vfat
nls_base 12932 4 nls_utf8,nls_cp437,vfat,fat
fuse 53184 1
dm_crypt 17032 0
crypto_blkcipher 21636 1 dm_crypt
dm_mod 58864 1 dm_crypt
it87 28696 0
hwmon_vid 7296 1 it87
ppdev 11656 0
lp 14724 0
loop 19468 0
snd_hda_intel 434776 1
wlan_scan_sta 17280 1
snd_pcm_oss 41760 0
snd_pcm 81800 2 snd_hda_intel,snd_pcm_oss
ath_rate_sample 17024 1
snd_mixer_oss 18816 1 snd_pcm_oss
ath_pci 241600 0
wlan 223904 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci
ath_hal 334480 3 ath_rate_sample,ath_pci
snd_seq_dummy 7428 0
snd_seq_oss 33152 0
snd_seq_midi 11072 0
snd_rawmidi 26784 1 snd_seq_midi
snd_seq_midi_event 11904 2 snd_seq_oss,snd_seq_midi
snd_seq 54304 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 25744 2 snd_pcm,snd_seq
snd_seq_device 11668 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 63688 11
snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 42268 0
i2c_nforce2 10752 0
button 11680 0
soundcore 12064 1 snd
serio_raw 9860 0
i2c_core 27936 2 nvidia,i2c_nforce2
snd_page_alloc 13072 2 snd_hda_intel,snd_pcm
k8temp 9216 0
evdev 14208 3
parport_pc 31016 1
parport 41776 3 ppdev,lp,parport_pc
pcspkr 7040 0
ext3 124688 6
jbd 51240 1 ext3
mbcache 12804 2 ext2,ext3
ide_cd_mod 36360 0
ide_disk 16512 1
sg 36448 0
sd_mod 29376 10
sr_mod 19652 0
cdrom 37928 2 ide_cd_mod,sr_mod
amd74xx 13448 0 [permanent]
ide_pci_generic 9220 0 [permanent]
ide_core 128284 4 ide_cd_mod,ide_disk,amd74xx,ide_pci_generic
sata_nv 27528 10
ohci1394 32564 0
ieee1394 93816 1 ohci1394
forcedeth 54032 0
ata_generic 10116 0
ehci_hcd 36108 0
ohci_hcd 25092 0
libata 165472 2 sata_nv,ata_generic
scsi_mod 160760 4 sg,sd_mod,sr_mod,libata
dock 14112 1 libata
thermal 22688 0
processor 42304 2 powernow_k8,thermal
fan 9352 0
thermal_sys 17728 4 video,thermal,processor,fan
** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller
[10de:0369] (rev a2)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0360] (rev
a3)
Subsystem: Giga-byte Technology Device [1458:0c11]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
Subsystem: Giga-byte Technology Device [1458:0c11]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c80 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:01.2 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller
[10de:036a] (rev a3)
Subsystem: Giga-byte Technology Device [1458:0c11]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller
[10de:036c] (rev a1) (prog-if 10)
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fc105000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller
[10de:036d] (rev a2) (prog-if 20)
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fc106000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1)
(prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Device [1458:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: ata_generic, ide-pci-generic, amd74xx
00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
[10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at a400 [size=8]
Region 1: I/O ports at a800 [size=4]
Region 2: I/O ports at ac00 [size=8]
Region 3: I/O ports at b000 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: Memory at fc10a000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: ata_generic, sata_nv, ide-pci-generic
00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
[10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 23
Region 0: I/O ports at b800 [size=8]
Region 1: I/O ports at bc00 [size=4]
Region 2: I/O ports at c000 [size=8]
Region 3: I/O ports at c400 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: Memory at fc10b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: ata_generic, sata_nv, ide-pci-generic
00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
[10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at d400 [size=8]
Region 3: I/O ports at d800 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at fc104000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: ata_generic, sata_nv, ide-pci-generic
00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev
a2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fc000000-fc0fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
Capabilities: <access denied>
00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio
[10de:0371] (rev a2)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fc100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 1278
Region 0: Memory at fc107000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at e000 [size=8]
Region 2: Memory at fc108000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fc109000 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge
[10de:0377] (rev a3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:08.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212/AR5213
Multiprotocol MAC/baseband processor [168c:0013] (rev 01)
Subsystem: D-Link System Inc Device [1186:3a13]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 96 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath_pci
Kernel modules: ath5k, ath_pci
01:0a.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10)
Subsystem: Giga-byte Technology Device [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fc014000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fc010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
02:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8600 GT
[10de:0402] (rev a1)
Subsystem: Giga-byte Technology Device [1458:3452]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 9000 [size=128]
[virtual] Expansion ROM at fb000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (900, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92f tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.26-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.26-1-amd64 suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-amd64/postinst/create-kimage-link-2.6.26-1-amd64: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-amd64/postinst/old-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/bootloader-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/initrd-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-system-map-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-initrd-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/preinst/overwriting-modules-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/elilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/bootloader-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-install-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/lilo-initrd-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/postinst/depmod-error-2.6.26-1-amd64: false
linux-image-2.6.26-1-amd64/prerm/removing-running-kernel-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/prerm/would-invalidate-boot-loader-2.6.26-1-amd64:
true
linux-image-2.6.26-1-amd64/postinst/bootloader-test-error-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/preinst/abort-overwrite-2.6.26-1-amd64:
linux-image-2.6.26-1-amd64/postinst/old-dir-initrd-link-2.6.26-1-amd64: true
linux-image-2.6.26-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-amd64/preinst/failed-to-move-modules-2.6.26-1-amd64:
--- End Message ---
