Package: src:linux Version: 3.2.46-1 Severity: normal Tags: patch upstream I just swapped a SATA disk on this computer, and smartctl then triggered a null pointer dereference in sg_scsi_ioctl.
It looks like there are fixes for it here: http://thread.gmane.org/gmane.linux.scsi/80934/focus=82217 But these have not yet been applied upstream. Ben. -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/shadbolt2-root ro ** Tainted: D (128) * Kernel has oopsed before. ** Kernel log: [7438462.004682] ata4: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen [7438462.010550] ata4: irq_stat 0x00400000, PHY RDY changed [7438462.016325] ata4: SError: { RecovComm Persist PHYRdyChg 10B8B } [7438462.022064] ata4: hard resetting link [7438462.744220] ata4: SATA link down (SStatus 0 SControl 300) [7438467.744195] ata4: hard resetting link [7438468.064208] ata4: SATA link down (SStatus 0 SControl 300) [7438468.064230] ata4: limiting SATA link speed to 1.5 Gbps [7438471.002286] IN=wl0 OUT= MAC= SRC=192.168.4.1 DST=192.168.4.255 LEN=263 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=243 [7438473.064211] ata4: hard resetting link [7438473.384223] ata4: SATA link down (SStatus 0 SControl 310) [7438473.384243] ata4.00: disabled [7438473.389926] ata4: EH complete [7438473.389963] ata4.00: detaching (SCSI 3:0:0:0) [7438473.390297] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [7438473.396409] sd 3:0:0:0: [sdc] Synchronizing SCSI cache [7438473.403307] sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [7438473.403320] sd 3:0:0:0: [sdc] Stopping disk [7438473.409215] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO [7438473.409235] sd 3:0:0:0: [sdc] START_STOP FAILED [7438473.409241] sd 3:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [7438473.420946] BUG: unable to handle kernel NULL pointer dereference at 0000000000000118 [7438473.424772] IP: [<ffffffff811a0379>] sg_scsi_ioctl+0x123/0x2fb [7438473.432138] PGD 73957067 PUD 370bb067 PMD 0 [7438473.432138] Oops: 0000 [#1] SMP [7438473.432138] CPU 0 [7438473.432138] Modules linked in: e1000e ebtable_nat ebtables ipt_REDIRECT ipt_MASQUERADE xt_multiport nf_conntrack_ipv6 nf_defrag_ipv6 xt_state xt_tcpudp xt_mac ip6t_REJECT ipt_REJECT ip6t_LOG ipt_LOG iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ip6table_filter ip6_tables iptable_filter ip_tables x_tables sch_tbf ppp_deflate zlib_deflate bsd_comp parport_pc ppdev lp parport cpufreq_conservative cpufreq_powersave cpufreq_stats cpufreq_userspace nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc sit tunnel4 ppp_async crc_ccitt ppp_generic slhc ext3 jbd hwmon_vid kvm_amd kvm radeon snd_pcm ttm snd_page_alloc snd_timer drm_kms_helper snd soundcore drm sp5100_tco power_supply i2c_piix4 powernow_k8 mperf i2c_algo_bit amd64_edac_mod i2c_core k10temp edac_mce_amd edac_core pcspkr evdev shpchp processor button thermal_sys ext4 crc16 jbd2 mbcache dm_mod raid1 md_mod microcode usbhid hid sg sd_mod crc_t10dif ata_generic ohci_hcd pata_atiixp ahci libahci ehci_hcd li bata tg3 libphy scsi_mod usbcore usb_common [last unloaded: e1000e] [7438473.432138] [7438473.432138] Pid: 27190, comm: smartctl Not tainted 3.2.0-4-amd64 #1 Debian 3.2.46-1 HP ProLiant MicroServer [7438473.432138] RIP: 0010:[<ffffffff811a0379>] [<ffffffff811a0379>] sg_scsi_ioctl+0x123/0x2fb [7438473.432138] RSP: 0018:ffff88003f8a7c58 EFLAGS: 00010257 [7438473.432138] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [7438473.432138] RDX: 0000000000000000 RSI: 00007fff6034db38 RDI: ffff880036c3041c [7438473.432138] RBP: ffff880072503800 R08: 00000000000282d0 R09: 0000000000000000 [7438473.432138] R10: 0000000000000202 R11: 0000000000000202 R12: 0000000000000024 [7438473.432138] R13: 00000000fffffff2 R14: 0000000000000012 R15: 00007fff6034db30 [7438473.432138] FS: 00007f6015e3e7c0(0000) GS:ffff880077c00000(0000) knlGS:0000000000000000 [7438473.432138] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [7438473.432138] CR2: 0000000000000118 CR3: 000000005171d000 CR4: 00000000000006f0 [7438473.432138] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [7438473.432138] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [7438473.432138] Process smartctl (pid: 27190, threadinfo ffff88003f8a6000, task ffff8800745ac970) [7438473.432138] Stack: [7438473.432138] 375b000000000004 0000000034383334 00007fff6034db38 ffff880036c30038 [7438473.432138] ffff8800725df800 0000005d00000024 ffff88003e8abd28 00000000fb777c0d [7438473.432138] ffffffff810364e8 ffff880036c30038 00000000fffffffa 00007fff6034db30 [7438473.620376] Call Trace: [7438473.620376] [<ffffffff810364e8>] ? should_resched+0x5/0x23 [7438473.620376] [<ffffffff8134833d>] ? printk+0x43/0x48 [7438473.620376] [<ffffffff811a0c55>] ? scsi_cmd_ioctl+0x353/0x3aa [7438473.620376] [<ffffffff810d0c6b>] ? handle_pte_fault+0x298/0x79f [7438473.620376] [<ffffffffa00193a2>] ? sd_ioctl+0xe8/0x119 [sd_mod] [7438473.620376] [<ffffffff8119e4ef>] ? blkdev_ioctl+0x5e6/0x5fb [7438473.620376] [<ffffffff811213a0>] ? block_ioctl+0x38/0x3c [7438473.620376] [<ffffffff81121368>] ? bdgrab+0x12/0x12 [7438473.620376] [<ffffffff81107721>] ? do_vfs_ioctl+0x459/0x49a [7438473.620376] [<ffffffff811b3d99>] ? __strncpy_from_user+0x18/0x48 [7438473.620376] [<ffffffff810ead50>] ? kmem_cache_free+0x2d/0x69 [7438473.620376] [<ffffffff811077ad>] ? sys_ioctl+0x4b/0x72 [7438473.620376] [<ffffffff81353b52>] ? system_call_fastpath+0x16/0x1b [7438473.620376] Code: 24 0c 00 48 8b 7c 24 18 ba 10 00 00 00 41 bd f2 ff ff ff 40 0f 95 c6 e8 ce 8e ff ff 48 89 c3 4c 89 f0 48 8b 74 24 10 48 c1 e8 05 <48> 8b bb 18 01 00 00 83 e0 07 0f b6 88 70 79 42 81 66 89 8b 20 [7438473.620376] RIP [<ffffffff811a0379>] sg_scsi_ioctl+0x123/0x2fb [7438473.620376] RSP <ffff88003f8a7c58> [7438473.620376] CR2: 0000000000000118 [7438473.785183] ---[ end trace 9ab17248b2604d45 ]--- [7438499.125626] ata4: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen [7438499.133085] ata4: irq_stat 0x00000040, connection status changed [7438499.140570] ata4: SError: { CommWake 10B8B DevExch } [7438499.147977] ata4: hard resetting link [7438502.033991] IN=wl0 OUT= MAC= SRC=192.168.4.1 DST=192.168.4.255 LEN=263 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=631 DPT=631 LEN=243 [7438505.984237] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [7438506.073458] ata4.00: ATA-8: WDC WD10EZRX-00A8LB0, 01.01A01, max UDMA/133 [7438506.081168] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [7438506.089962] ata4.00: configured for UDMA/133 [7438506.097552] ata4: EH complete [7438506.105336] scsi 3:0:0:0: Direct-Access ATA WDC WD10EZRX-00A 01.0 PQ: 0 ANSI: 5 [7438506.114956] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [7438506.122622] sd 3:0:0:0: [sdc] 4096-byte physical blocks [7438506.130379] sd 3:0:0:0: [sdc] Write Protect is off [7438506.130423] sd 3:0:0:0: Attached scsi generic sg2 type 0 [7438506.145252] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [7438506.152765] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [7438506.191487] sdc: unknown partition table [7438506.199651] sd 3:0:0:0: [sdc] Attached SCSI disk ** Model information sys_vendor: HP product_name: ProLiant MicroServer product_version: chassis_vendor: HP chassis_version: bios_vendor: HP bios_version: O41 ** Loaded modules: e1000e ebtable_nat ebtables ipt_REDIRECT ipt_MASQUERADE xt_multiport nf_conntrack_ipv6 nf_defrag_ipv6 xt_state xt_tcpudp xt_mac ip6t_REJECT ipt_REJECT ip6t_LOG ipt_LOG iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack ip6table_filter ip6_tables iptable_filter ip_tables x_tables sch_tbf ppp_deflate zlib_deflate bsd_comp parport_pc ppdev lp parport cpufreq_conservative cpufreq_powersave cpufreq_stats cpufreq_userspace nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc sit tunnel4 ppp_async crc_ccitt ppp_generic slhc ext3 jbd hwmon_vid kvm_amd kvm radeon snd_pcm ttm snd_page_alloc snd_timer drm_kms_helper snd soundcore drm sp5100_tco power_supply i2c_piix4 powernow_k8 mperf i2c_algo_bit amd64_edac_mod i2c_core k10temp edac_mce_amd edac_core pcspkr evdev shpchp processor button thermal_sys ext4 crc16 jbd2 mbcache dm_mod raid1 md_mod microcode usbhid hid sg sd_mod crc_t10dif ata_generic ohci_hcd pata_atiixp ahci libahci ehci_hcd libata tg3 libphy scsi_mod usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge [1022:9601] Subsystem: Hewlett-Packard Company Device [103c:1609] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Hewlett-Packard Company Device [103c:9602] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe600000-fe7fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe800000-fe8fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe900000-fe9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:1609] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: I/O ports at c000 [size=8] Region 1: I/O ports at b000 [size=4] Region 2: I/O ports at a000 [size=8] Region 3: I/O ports at 9000 [size=4] Region 4: I/O ports at 8000 [size=16] Region 5: Memory at fe5ffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:1609] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe5fe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:1609] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe5ff800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:1609] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe5fd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:1609] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe5ff400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 42) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: piix4_smbus 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (rev 40) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company Device [103c:1609] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Kernel driver in use: pata_atiixp 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40) Subsystem: Hewlett-Packard Company Device [103c:1609] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=04, subordinate=04, sec-latency=64 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:16.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:1609] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe5fc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:16.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:1609] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe5ff000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: amd64_edac 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS880M [Mobility Radeon HD 4200 Series] [1002:9712] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1609] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at d000 [size=256] Region 2: Memory at fe7f0000 (32-bit, non-prefetchable) [size=64K] Region 5: Memory at fe600000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: radeon 02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3] Subsystem: Intel Corporation Gigabit CT Desktop Adapter [8086:a01f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fe8e0000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at fe800000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at e800 [size=32] Region 3: Memory at fe8dc000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at fe880000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: e1000e 03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5723 Gigabit Ethernet PCIe [14e4:165b] (rev 10) Subsystem: Hewlett-Packard Company NC107i Integrated PCI Express Gigabit Server Adapter [103c:705d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 0a81:0205 Chesen Electronics Corp. PS/2 Keyboard+Mouse Adapter -- System Information: Debian Release: 7.1 APT prefers stable APT policy: (990, 'stable'), (500, 'stable-updates'), (100, 'proposed-updates'), (100, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u1 ii linux-doc-3.2 3.2.46-1 Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20131005041754.27326.17813.report...@shadbolt.decadent.org.uk