Re: Returned mail: see transcript for details
You recently sent mail to [EMAIL PROTECTED] The e-mail address, [EMAIL PROTECTED], has been changed. The new e-mail address is [EMAIL PROTECTED] Your mail was forwarded to the new address; you do not need to resend it. This message was sent automatically. No reply is necessary. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Install Hangs
I am trying to reinstall Debian on a Sun Netra X1 server. The problem is, when I get to the "install base system" portion, the installer gets to about 6% and then it hangs. I have to power off the server and then start over again. Sometimes I will also get a "file corrupt" error. I have checked the CD-ROM, but it checks out. I have re-burnt the CD, and I have even tried a version of Ubuntu server, same results. In addition I have tried a different CD-ROM drive, but I get the same results. Any ideas? Thank you, - Chris Burwell -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: AW: 3D acceleration with Creator3D
Jurzitza, Dieter wrote: to all of my knowledge this does not work out of the box. AFAIR Dave Miller pointed out a while ago that 3D-accel on Sparc is broken for the Creator 3D. I am afraid you're stuck here. You'd have to make the driver work again on your own. This sounds like a huge piece of work with doubtable results. OK, many thanks for confirming the situation. I don't really need 3D accel, I just hate to have something not working if it can easily be made to work. Now I know the situation, I guess I'll stop trying. Cheers Hugh -- S=u=p=p=o=r=t===D=e=b=i=a=n===http://www.debian.org = Dr. Hugh C. Pumphrey | Tel. 0131-650-6026,Fax:0131-662-0478 School of GeoSciences | Replace 0131 with +44-131 if outside UK The University of Edinburgh | Email: [EMAIL PROTECTED] EDINBURGH EH9 3JN, Scotland | web: www.geos.ed.ac.uk/contacts/homes/hcp =I==o=f=t=e=n==i=g=n=o=r=e==M=S==W=o=r=d==a=t=t=a=c=h=m=e=n=t=s== -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bootable CD kernel Image - Selfmade
Hi, has someone produced a bootable CD for SPARC containing a selfmade kernel-image ? I do only need the relevant two or three lines containing mkisofs, etc. ... I'd taken already a look into the SUN blueprint and into the package debian_cd ... but these seem to be overkill for my particular 'simple' problem - lots of unnecessary stuff in which I don't need. THNX, Roger begin:vcard fn:Dr. Roger Zimmermann n:Zimmermann;Dr. Roger org;quoted-printable;quoted-printable:Zentrum f=C3=BCr exp. Medizin;Institut f=C3=BCr Neuro- und Pathophysiologie adr;quoted-printable:;;Martinistra=C3=9Fe 52;Hamburg;;20246;Germany email;internet:[EMAIL PROTECTED] tel;work:..49 (0)40 42803 5351 tel;fax:..49 (0)40 42803 7255 x-mozilla-html:FALSE url:http://www.uke.uni-hamburg.de version:2.1 end:vcard
AW: 3D acceleration with Creator3D
Hi Hugh, to all of my knowledge this does not work out of the box. AFAIR Dave Miller pointed out a while ago that 3D-accel on Sparc is broken for the Creator 3D. I am afraid you're stuck here. You'd have to make the driver work again on your own. This sounds like a huge piece of work with doubtable results. Take care Dieter -- HARMAN BECKER AUTOMOTIVE SYSTEMS Dr.-Ing. Dieter Jurzitza Manager Hardware Systems System Development Industriegebiet Ittersbach Becker-Göring Str. 16 D-76307 Karlsbad / Germany Phone: +49 (0)7248 71-1577 Fax: +49 (0)7248 71-1216 eMail: [EMAIL PROTECTED] Internet: http://www.becker.de > -Ursprüngliche Nachricht- > Von: H C Pumphrey [mailto:[EMAIL PROTECTED] > Gesendet: Montag, 28. August 2006 10:12 > An: debian-sparc@lists.debian.org > Betreff: 3D acceleration with Creator3D > No luck getting DRI/DRM/3D accelleration to work with the *** Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und loeschen Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and delete this e-mail. Any unauthorized copying, disclosure or distribution of the contents in this e-mail is strictly forbidden. ***
3D acceleration with Creator3D
Under the subject Sarge->Etch upgrade on Ultra 10: 2.4->2.6 kernel issues I wrote: It's back to being a usable machine now. Time to see if sound and 3D acceleration can be made to work ... Well, sound was no trouble: I had to run alsaconf, but the sound card was auto-detected. It appears to work better than it did under OSS, too. No luck getting DRI/DRM/3D accelleration to work with the Creator3D card, though. glxgears works (but slowly) if you install the pure software version of mesa (libgl1-mesa-swx11). If you install the dri version, libgl1-mesa-dri, it crashes the X server. Next, I installed the afbinit package and found the proprietory microcode. However, afbinit only tries to load the microcode into an Elite3D card. Forcing the issue by bypassing the init script and using the real afbinit programme to forcibly load the microcode prevented the Creator3D from working at all until I did a cold re-boot. I googled extensively for info and found little help. There were plenty of suggestions from two years ago that it would not work. Can anyone confirm for definite that 3D acceleration is not available for the Creator3D? Or if it is available, point me at some idiot-proof docs? Cheers Hugh -- S=u=p=p=o=r=t===D=e=b=i=a=n===http://www.debian.org = Dr. Hugh C. Pumphrey | Tel. 0131-650-6026,Fax:0131-662-0478 School of GeoSciences | Replace 0131 with +44-131 if outside UK The University of Edinburgh | Email: [EMAIL PROTECTED] EDINBURGH EH9 3JN, Scotland | web: www.geos.ed.ac.uk/contacts/homes/hcp =I==o=f=t=e=n==i=g=n=o=r=e==M=S==W=o=r=d==a=t=t=a=c=h=m=e=n=t=s== -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
