Re: Please test the new kernel (2.6.18.dfsg.1-9)
Jim Watson wrote: On Thu, Jan 25, 2007 at 22:28:12 -0800, Jurij Smakov wrote: Hi, A set of new kernel images has been uploaded to unstable a couple of days ago, including linux-image-2.6.18-4-sparc64_2.6.18.dfsg.1-9_sparc.deb Jurij, This works on my sunblade100, ( as before, it needs video=atyfb:off ) How do you pass this parameter? i tried `expert video=atyfb:off` and it failed. kk jim -- Karl Goetz User of gNewSense: Free as in Freedom - http://www.gnewsense.org Australian Ubuntu users team - http://wiki.ubuntu.com/AustralianTeam User of Debian, The Universal Operating System - http://www.debian.org signature.asc Description: OpenPGP digital signature
Re: Please test the new kernel (2.6.18.dfsg.1-9)
On 08/02/2007, at 10:05 PM, Karl Goetz wrote: Jim Watson wrote: On Thu, Jan 25, 2007 at 22:28:12 -0800, Jurij Smakov wrote: Hi, A set of new kernel images has been uploaded to unstable a couple of days ago, including linux-image-2.6.18-4-sparc64_2.6.18.dfsg.1-9_sparc.deb Jurij, This works on my sunblade100, ( as before, it needs video=atyfb:off ) How do you pass this parameter? i tried `expert video=atyfb:off` and it failed. kk When the system is powered on, look for the SILO message then hold down the tab key and it will stop with a list of available kernels and the boot: prompt. Assuming you want the default kernel labeled Linux, type as below after the boot prompt and hit enter: boot: Linux video=atyfb:off I suppose this could be configured in /boot/silo.conf too... jim -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Please test the new kernel (2.6.18.dfsg.1-9)
Jim Watson wrote: On 08/02/2007, at 10:05 PM, Karl Goetz wrote: Jim Watson wrote: On Thu, Jan 25, 2007 at 22:28:12 -0800, Jurij Smakov wrote: Hi, A set of new kernel images has been uploaded to unstable a couple of days ago, including linux-image-2.6.18-4-sparc64_2.6.18.dfsg.1-9_sparc.deb Jurij, This works on my sunblade100, ( as before, it needs video=atyfb:off ) How do you pass this parameter? i tried `expert video=atyfb:off` and it failed. kk When the system is powered on, look for the SILO message then hold down the tab key and it will stop with a list of available kernels and the boot: prompt. Assuming you want the default kernel labeled Linux, type as below after the boot prompt and hit enter: boot: Linux video=atyfb:off I suppose this could be configured in /boot/silo.conf too... jim Hi. I'm trying to install off a daily (last few days[0]), so i dont think silo config is an option(?). Unfortunately i still get the same error. [1] The error is as follows (sorry about any line breaks): Allocated 8 Megs of memory at 0x4000 for kernel Loaded kernel version 2.6.18 Loading initial ramdisk (3923248 bytes at 0x2F802000 phys, 0x40C0 virt ) ... Illegal Instruction ok op-0 This is the same error as before the new kernel. [0] http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/sparc/iso-cd/debian-testing-sparc-businesscard.iso [1] http://users.on.net/~goetz/P1010106.JPG ps. (for the archives, Linux is not an option. install expert rescue auto are). -- Karl Goetz User of gNewSense: Free as in Freedom - http://www.gnewsense.org Australian Ubuntu users team - http://wiki.ubuntu.com/AustralianTeam User of Debian, The Universal Operating System - http://www.debian.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Boot problem on SunBlade 1000
Hi,
I installed a debian distribution on my SunBlade 1000 by net (with
file .img).
When I boot system by disk, I have the following error:
Boot service:..(information on boot disk, it's a scsi disk)
SILO version 1.4.9
boot:
Allocated 8 Megs of memory at 0x4000 for kernel
Uncompressing image
Load kernel version 2.4.27
Load initial ramdisk
Remapping the kernel...Bootin Linux...
Starting CPU1...Illegal Instrunction
{1}
---
I don't understand problem
Can you help me??
Thanks
Regards
Rocco
Naviga e telefona senza limiti con Tiscali
Scopri le promozioni Tiscali adsl: navighi e telefoni senza canone Telecom
http://abbonati.tiscali.it/adsl/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Sun PGX64 Video questions
I have a Sun Ultra 60 running ETCH connected to my gdm20d10 monitor. I have a TATUNG Comp 10 I would like to add to my network. The TATUNG has a Creator 3D card. I have a PGX64 card I would like to put in the TATUNG so I can run it through my KVM using my Gateway VX900 monitor. From what I can find thee PGX64 and the VX900 are compatible. I am 60 years old and would like to avoid crawling under my desk to change monitor hook-ups if possible. My questions are: If I remove the Creator card and put the PGX64 in my TATUNG, will the card find and set itself to the monitor so I don't have problems with the initial Sun boot display or will the Sun boot display attempt to boot into 1152x900 which isn't supported by the monitor? If there is no answer to the above question, am I endangering my monitor if I try this? Earl URL http://deserthowler.cjb.net Instant messenger: earlcoyote ICQ:64033496 Never miss an email again! Yahoo! Toolbar alerts you the instant new Mail arrives. http://tools.search.yahoo.com/toolbar/features/mail/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Boot problem on SunBlade 1000
On Thu, Feb 08, 2007 at 05:35:12PM +0100, [EMAIL PROTECTED] wrote:
Hi,
I installed a debian distribution on my SunBlade 1000 by net (with
file .img).
When I boot system by disk, I have the following error:
Boot service:..(information on boot disk, it's a scsi disk)
SILO version 1.4.9
boot:
Allocated 8 Megs of memory at 0x4000 for kernel
Uncompressing image
Load kernel version 2.4.27
Load initial ramdisk
Remapping the kernel...Bootin Linux...
Starting CPU1...Illegal Instrunction
{1}
---
I don't understand problem
Can you help me??
Thanks
Regards
Rocco
Hi Rocco. I had a similar problem when I tried to install on my blade 1000,
looking on internet I found a very, very useful how-to (http://doownek.org)
and using it I was able to install all without problems. Problems came
after, when I tried to use the graphic card and other blade's
characteristics (but this is another story ...).
Look for it and use it. I think that you'll be able to start without
problems.
Cheers
Antonio
--
#+--+#+--+#+--+#+--+#+--+#+--+#+--+#+--+#+--+#
Antonio Madesani
[EMAIL PROTECTED]
[EMAIL PROTECTED]
#+--+#+--+#+--+#+--+#+--+#+--+#+--+#+--+#+--+#
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Ultra Enterprise 3000k Installation
I can't get the installer to work on this server. With 3.1, the installer simply cannot find the CD drive. The scsi driver, esp, is loaded. I believe the cd-rom should be at scsi ID 6, I don't know how to tell the installer to look here though. I also tried with a debian testing install CD. I get a kernel panic in this case: Kernel panic: esp_handle: current_SC == penguin within interrupt! Is there a way to get more information? This corresponds to a block of code around line 4243 of the esp.c driver: http://www.gelato.unsw.edu.au/lxr/source/drivers/scsi/esp.c#L4243 I don't know what to do about these problems. I've currently got Solaris 10 installed, but Debian would be preferrable. Thanks, Nathan
Xлебо булочный бизнеSS
П р о д а ё т с я д е й с т в у ю щ и й б и з н е с с ов с е м и а к т и в а м и и б р е н д о м. С т а б и л ь н ы йд е й с т в у ю щ и йх л е б о б у л о ч н ы йб и з н е с в Ч е л я б и н с к е. Б р е н д: Т у р е ц к и й Х л е б =- www.tzh.ic.cz -= В л а д и м и рС а б л и н ( 9 1 9 ) 3 1 7 - 7 7 - 0 8 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
