Problem installing Debian 4.0r4a on SunBlade 100

[Ambrogio Sironi]

Glacier Hi all

I'm trying to install Debian 4.0r4a on SunBlade100.

WS conf.:
OBP: 4.17.1
Ram: 1Gb

Debian:
SILO 1.4.13


Staring the boot from CD I see:

Allocated 8 Megs of memory at 0x4000 for kernel

Loaded kernel version 2.6.18

Loading initial ramdisk (3881967 bytes at 0x3F802000 phys, 0x40C0
virt)...

ERROR: Last trap: Illegal Instruction

Error -256
ERROR: Last trap: Fast Data Access MMU Miss

Error -256

Stack Underflow

ok

Help me 
Thanks in advance.
By

Re: XVR-500 support in Lenny

[Petr Vyslouzil]

Dave, Julien, thanks for your replies.

I asked just to make sure I did not miss something obvious (like the .config file in /boot 
dir :)). I've been wondering why Debian on Sparc doesn't have compiled-in drivers for 
SUN's graphics cards. I can confirm that sunxvr500 driver works flawlessly even with 
XVR-600 card (although lspci shows wrong description), so at least all Sun Blade [12]500 
users would benefit. And I suppose that sunxvr2500 is not any worse.
So, please, could you consider to compile them in? The difference between OpenBoot ansi 
terminal and XVR-600 framebuffer is abysmal.


regards,
Petr


Petr:

Well, a google search turned up this page 
(http://merkel.debian.org/~jurij/) which has the Debian kernel 
configurations.


The entry for 2.6.26-8 for sparc, "config-2.6.26-1-sparc64.gz 
" 
shows:


# CONFIG_FB_XVR500 is not set
# CONFIG_FB_XVR2500 is not set

Does that help?

[I was expecting to find information that tells me where the "config" 
file details are contained on a running system (under /proc, I thought), 
but I haven't found that, yet  Perhaps that functionality isn't 
available / compiled into the sparc kernels...]


Cheers,
Dave



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Сайдинг Mitten, Georgia-Pacific, СertainTeed

[Brittanie Klimaszewski]

ПР0ДАЖА И М0НТАЖ САЙДИНГА И В0Д0СТ0К0В.

-

Наша компания продает высококачественный виниловый и цокольный сайдинг
производства Канады, США и России.

ЦЕНЫ на материалы - значительно НИЖЕ рыночных, за счет прямых закупок
у экспортеров и специальных скидок предоставленных для нашей компании.

Выполняем доставку и монтаж любого вида сайдинга в кратчайшие сроки.
Выезжаем на замеры без выходных и задержек.
Наши менеджеры принимают звонки круглосуточно.
Цены на услуги монтажа Вас приятно удивят.

Работаем по схеме: Замер - Расчет - Доставка - Монтаж .

_

Для более подробной информации, позвоните нашим менеджерам.

Телефоны менеджеров: 
 8 [926] 02 10 847

 8 [926] 566-9000


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: XVR-500 support in Lenny

[Julien Cristau]

On Mon, Oct 20, 2008 at 22:55:18 -0400, Dave Barnett wrote:

> [I was expecting to find information that tells me where the "config"  
> file details are contained on a running system (under /proc, I thought),  
> but I haven't found that, yet  Perhaps that functionality isn't  
> available / compiled into the sparc kernels...]
>
The Debian kernels install the config in /boot/config-$(uname -r).

Cheers,
Julien


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]