Re: Seems I have bad timing with Debian on SPARC.
On 2013-10-04, Hartwig Atrops wrote: > On Friday 04 October 2013 22:43:43 u60 spitfire wrote: >> Nice. I'll disable XDM and do a manual startup. Did you write out >> /etc/X11/xorg.conf? (if not, if there's a chance you could before >> starting X do an X -configure and post the resulting xorg.conf.new >> that pops up in your home directory that would be great. > > My Ultra 60 has a Creator 3D card, too . X worked out of the box here, I did > not need to provide an xorg.conf (Wheezy and Jessie). > > Xdm is in use, too - no problems. Neither local monitor nor XDMCP. No xorg.conf here also. I get 1280x1024 on old Sun (Hitachi?) monitor with VGA adapter on Creator card. Xorg -configure doesn't work, so no /root/xorg.conf.new. I do get a Segmentation fault when I shut down X before powering off. [I have Debian on external SCSI drive. Solaris 10 and OpenBSD on the internal drives. It's a slow machine, so I wouldn't expect too much. Debian on the 1.5MZ, 500MB ram Sunpci card is faster.] Regards, Howard E. -- To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/bb9jlmf6id...@mid.individual.net
Re: Seems I have bad timing with Debian on SPARC.
Hi. On Friday 04 October 2013 22:43:43 u60 spitfire wrote: > Nice. I'll disable XDM and do a manual startup. Did you write out > /etc/X11/xorg.conf? (if not, if there's a chance you could before > starting X do an X -configure and post the resulting xorg.conf.new > that pops up in your home directory that would be great. > > I'm going to switch back to wheezy tonight if plans fall through. > > thanks, > > u60spitfire > > On Fri, Oct 4, 2013 at 2:19 PM, Howard Eisenberger wrote: > > On 2013-10-03, Hartwig Atrops wrote: > >> I reinstalled my Ultra 60 some days ago - dual boot Wheezy / Jessie. I > >> used the netinstall CDs. I'm running XFCE4, workes fine so far on both > >> Wheezy and Jessie. > >> > >> Ok, Iceweasel is broken - that's an old problem. And installing Jessie > >> with the XFCE CD ended up in a mixture of XFCE and Gnome - unusable. But > >> starting with the netinstall CD, even Jessie is working without major > >> problems so far. > > > > I just fired up my Ultra 60 with Creator card running Wheezy. > > No desktop manager, startx plus window manager. > > > > Everything seems to work, except: > > > > (1) No sound with SMP kernel. Non-SMP kernel O.K. > > > > (2) "Bus error" with iceweasel and iceape. I believe it's been > > like this for a couple of years now. > > > > $ uname -a > > Linux debu60 3.2.0-4-sparc64 #1 Debian 3.2.46-1 sparc64 GNU/Linux > > > > $ Xorg -version > > X.Org X Server 1.12.4 > > Release Date: 2012-08-27 > > X Protocol Version 11, Revision 0 > > Build Operating System: Linux 2.6.32-5-sparc64-smp sparc Debian > > Current Operating System: Linux debu60 3.2.0-4-sparc64 #1 Debian 3.2.46-1 > > sparc64 > > Kernel command line: root=/dev/sdc2 ro > > Build Date: 17 April 2013 11:30:19AM > > xorg-server 2:1.12.4-6 (Julien Cristau ) > > Current version of pixman: 0.26.0 > > Before reporting problems, check http://wiki.x.org > > to make sure that you have the latest version. > > > > $ grep -i sunffb /var/log/Xorg.0.log > > [ 108.882] (==) Matched sunffb as autoconfigured driver 0 > > [ 108.882] (==) Matched sunffb as autoconfigured driver 1 > > [ 108.883] (II) LoadModule: "sunffb" > > [ 108.924] (II) Loading /usr/lib/xorg/modules/drivers/sunffb_drv.so > > [ 108.938] (II) Module sunffb: vendor="X.Org Foundation" > > [ 109.057] (II) SUNFFB: driver for Creator, Creator 3D and Elite 3D > > [ 109.071] (WW) Falling back to old probe method for sunffb > > [ 109.074] (WW) SUNFFB: More than one matching Device section found: > > Autoconfigured Video Dev > > [ 109.082] (II) SUNFFB(0): Creating default Display subsection in > > Screen section > > [ 109.082] (==) SUNFFB(0): RGB weight 888 > > [ 109.082] (==) SUNFFB(0): Default visual is TrueColor > > [ 109.083] (==) SUNFFB(0): Using gamma correction (1.0, 1.0, 1.0) > > [ 109.083] (==) SUNFFB(0): Using HW cursor > > [ 109.167] (==) SUNFFB(0): DPI set to (96, 96) > > [ 109.238] (II) SUNFFB(0): Using XFree86 Acceleration Architecture > > (XAA) [ 109.239] (==) SUNFFB(0): Backing store disabled > > [ 109.239] (==) SUNFFB(0): Silken mouse enabled > > [ 109.242] (==) SUNFFB(0): DPMS enabled > > [ 109.242] (==) SUNFFB(0): DPMS enabled > > > > Regards, > > > > Howard E. > > > > > > -- > > To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org > > with a subject of "unsubscribe". Trouble? Contact > > listmas...@lists.debian.org Archive: > > http://lists.debian.org/bb8f5ifu58...@mid.individual.net My Ultra 60 has a Creator 3D card, too . X worked out of the box here, I did not need to provide an xorg.conf (Wheezy and Jessie). Xdm is in use, too - no problems. Neither local monitor nor XDMCP. The xorg.conf file I include is taken from an Ultra 2 / Creator 3D running Debian Lenny. Forget the resolution settings, this is an old entry. Resolution is hard wired in the 13W3 -> VGA adapter (1280 x 1024). I could send a /var/log/Xorg.0.log from the Ultra 60 if you want. Regards, Hartwig # xorg.conf (X.Org X Window System server configuration file) Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" EndSection Section "Device" Identifier "Configured Video Device" Driver "sunffb" EndSection Section "Monitor" Identifier "Sun GDM 5410" HorizSync 30-82 VertRefresh 50-120 EndSection Section "Monitor" Identifier "Eizo 17 inch" HorizSync 30-86 VertRefresh 55-160 EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Sun GDM 5410" DefaultDepth24 SubSection "
Re: Seems I have bad timing with Debian on SPARC.
Nice. I'll disable XDM and do a manual startup. Did you write out /etc/X11/xorg.conf? (if not, if there's a chance you could before starting X do an X -configure and post the resulting xorg.conf.new that pops up in your home directory that would be great. I'm going to switch back to wheezy tonight if plans fall through. thanks, u60spitfire On Fri, Oct 4, 2013 at 2:19 PM, Howard Eisenberger wrote: > On 2013-10-03, Hartwig Atrops wrote: > >> I reinstalled my Ultra 60 some days ago - dual boot Wheezy / Jessie. I used >> the netinstall CDs. I'm running XFCE4, workes fine so far on both Wheezy and >> Jessie. >> >> Ok, Iceweasel is broken - that's an old problem. And installing Jessie with >> the XFCE CD ended up in a mixture of XFCE and Gnome - unusable. But starting >> with the netinstall CD, even Jessie is working without major problems so far. > > > I just fired up my Ultra 60 with Creator card running Wheezy. > No desktop manager, startx plus window manager. > > Everything seems to work, except: > > (1) No sound with SMP kernel. Non-SMP kernel O.K. > > (2) "Bus error" with iceweasel and iceape. I believe it's been > like this for a couple of years now. > > $ uname -a > Linux debu60 3.2.0-4-sparc64 #1 Debian 3.2.46-1 sparc64 GNU/Linux > > $ Xorg -version > X.Org X Server 1.12.4 > Release Date: 2012-08-27 > X Protocol Version 11, Revision 0 > Build Operating System: Linux 2.6.32-5-sparc64-smp sparc Debian > Current Operating System: Linux debu60 3.2.0-4-sparc64 #1 Debian 3.2.46-1 > sparc64 > Kernel command line: root=/dev/sdc2 ro > Build Date: 17 April 2013 11:30:19AM > xorg-server 2:1.12.4-6 (Julien Cristau ) > Current version of pixman: 0.26.0 > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > > $ grep -i sunffb /var/log/Xorg.0.log > [ 108.882] (==) Matched sunffb as autoconfigured driver 0 > [ 108.882] (==) Matched sunffb as autoconfigured driver 1 > [ 108.883] (II) LoadModule: "sunffb" > [ 108.924] (II) Loading /usr/lib/xorg/modules/drivers/sunffb_drv.so > [ 108.938] (II) Module sunffb: vendor="X.Org Foundation" > [ 109.057] (II) SUNFFB: driver for Creator, Creator 3D and Elite 3D > [ 109.071] (WW) Falling back to old probe method for sunffb > [ 109.074] (WW) SUNFFB: More than one matching Device section found: > Autoconfigured Video Dev > [ 109.082] (II) SUNFFB(0): Creating default Display subsection in Screen > section > [ 109.082] (==) SUNFFB(0): RGB weight 888 > [ 109.082] (==) SUNFFB(0): Default visual is TrueColor > [ 109.083] (==) SUNFFB(0): Using gamma correction (1.0, 1.0, 1.0) > [ 109.083] (==) SUNFFB(0): Using HW cursor > [ 109.167] (==) SUNFFB(0): DPI set to (96, 96) > [ 109.238] (II) SUNFFB(0): Using XFree86 Acceleration Architecture (XAA) > [ 109.239] (==) SUNFFB(0): Backing store disabled > [ 109.239] (==) SUNFFB(0): Silken mouse enabled > [ 109.242] (==) SUNFFB(0): DPMS enabled > [ 109.242] (==) SUNFFB(0): DPMS enabled > > Regards, > > Howard E. > > > -- > To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org > with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org > Archive: http://lists.debian.org/bb8f5ifu58...@mid.individual.net > -- To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAN-w9fweKSX+8iuZ8Ev7fUa2N+LWbYt=47racrgid6qvjwq...@mail.gmail.com
Re: Seems I have bad timing with Debian on SPARC.
On 2013-10-03, Hartwig Atrops wrote: > I reinstalled my Ultra 60 some days ago - dual boot Wheezy / Jessie. I used > the netinstall CDs. I'm running XFCE4, workes fine so far on both Wheezy and > Jessie. > > Ok, Iceweasel is broken - that's an old problem. And installing Jessie with > the XFCE CD ended up in a mixture of XFCE and Gnome - unusable. But starting > with the netinstall CD, even Jessie is working without major problems so far. I just fired up my Ultra 60 with Creator card running Wheezy. No desktop manager, startx plus window manager. Everything seems to work, except: (1) No sound with SMP kernel. Non-SMP kernel O.K. (2) "Bus error" with iceweasel and iceape. I believe it's been like this for a couple of years now. $ uname -a Linux debu60 3.2.0-4-sparc64 #1 Debian 3.2.46-1 sparc64 GNU/Linux $ Xorg -version X.Org X Server 1.12.4 Release Date: 2012-08-27 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32-5-sparc64-smp sparc Debian Current Operating System: Linux debu60 3.2.0-4-sparc64 #1 Debian 3.2.46-1 sparc64 Kernel command line: root=/dev/sdc2 ro Build Date: 17 April 2013 11:30:19AM xorg-server 2:1.12.4-6 (Julien Cristau ) Current version of pixman: 0.26.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. $ grep -i sunffb /var/log/Xorg.0.log [ 108.882] (==) Matched sunffb as autoconfigured driver 0 [ 108.882] (==) Matched sunffb as autoconfigured driver 1 [ 108.883] (II) LoadModule: "sunffb" [ 108.924] (II) Loading /usr/lib/xorg/modules/drivers/sunffb_drv.so [ 108.938] (II) Module sunffb: vendor="X.Org Foundation" [ 109.057] (II) SUNFFB: driver for Creator, Creator 3D and Elite 3D [ 109.071] (WW) Falling back to old probe method for sunffb [ 109.074] (WW) SUNFFB: More than one matching Device section found: Autoconfigured Video Dev [ 109.082] (II) SUNFFB(0): Creating default Display subsection in Screen section [ 109.082] (==) SUNFFB(0): RGB weight 888 [ 109.082] (==) SUNFFB(0): Default visual is TrueColor [ 109.083] (==) SUNFFB(0): Using gamma correction (1.0, 1.0, 1.0) [ 109.083] (==) SUNFFB(0): Using HW cursor [ 109.167] (==) SUNFFB(0): DPI set to (96, 96) [ 109.238] (II) SUNFFB(0): Using XFree86 Acceleration Architecture (XAA) [ 109.239] (==) SUNFFB(0): Backing store disabled [ 109.239] (==) SUNFFB(0): Silken mouse enabled [ 109.242] (==) SUNFFB(0): DPMS enabled [ 109.242] (==) SUNFFB(0): DPMS enabled Regards, Howard E. -- To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/bb8f5ifu58...@mid.individual.net