Re: [FIX]: ultra45 boot failing... = Netra T1 200 too?

2009-02-17 Thread Laurent GUERBY
On Fri, 2009-02-06 at 23:11 -0800, David Miller wrote:
 The patch:
 
   debian/patches/bugfix/sparc/arch_pci_hostcontroller_workaround.patch
 
 causes ultra45 (and other PCI-Express based workstations) to
 hard reset when the PCI bus is initially scanned by the kernel.
 
 Please revert this patch from the debian kernel in Lenny and
 anywhere else it appears.
 
 The code in that patch creating dummy PCI root host controller nodes
 is wrong and does nothing other than cause trouble.  If it fixes some
 problem with the X server for PCI devices on sparc64 that problem
 needs to be fixed some other way.

On my Netra T1 200 the lenny (net) boot installer stopped just after
detecting network hardware. I then tried the etch one which worked
fine for network, mirror and stuff and at least up to disk selection,
the machine has no disk yet (BTW is full NFS install possible?).

May be it's the same problem? Anyone with a successful install
of etch or lenny on a Netra T1 200?

~ # lspci -nn
00:00.0 Host bridge [0600]: Sun Microsystems Computer Corp. Ultra IIe 
[108e:a001]
00:01.0 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI 
Bridge [108e:5000] (rev 13)

00:01.1 PCI bridge [0604]: Sun Microsystems Computer Corp. Simba Advanced PCI 
Bridge [108e:5000] (rev 13)

01:03.0 Non-VGA unclassified device []: ALi Corporation M7101 Power 
Management Controller [PMU] [10b9:7101]
01:05.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. RIO GEM 
[108e:1101] (rev 01)

01:05.3 USB Controller [0c03]: Sun Microsystems Computer Corp. RIO USB 
[108e:1103] (rev 01)
01:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge 
[Aladdin IV/V/V+] [10b9:1533]
01:0c.0 Bridge [0680]: Sun Microsystems Computer Corp. RIO EBUS [108e:1100] 
(rev 01)
01:0c.1 Ethernet controller [0200]: Sun Microsystems Computer Corp. RIO GEM 
[108e:1101] (rev 01)
01:0c.3 USB Controller [0c03]: Sun Microsystems Computer Corp. RIO USB 
[108e:1103] (rev 01)
01:0d.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c3)
02:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53C896/897 
[1000:000b] (rev 07)
02:08.1 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53C896/897 
[1000:000b] (rev 07)

Thanks in advance,

Laurent



-- 
To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org



Re: [FIX]: ultra45 boot failing... = Netra T1 200 too?

2009-02-17 Thread David Miller
From: Laurent GUERBY laur...@guerby.net
Date: Wed, 18 Feb 2009 01:38:05 +0100

 May be it's the same problem? Anyone with a successful install
 of etch or lenny on a Netra T1 200?

No, different problem.  You won't even get to the real
console, the machine will just reset itself before booting
does anything meaningful.


-- 
To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org