Re: configure ati chipset for Sun ultra 5
On 2010-05-30, philo wrote: > i try with your xorg.conf minimal ! > i have only one error into Xorg.0.log : > >> (EE) Screen(s) found, but none have a usable configuration. > > i have an hitachi CM769ET screen ! resolution max 1600*1200 pixels. > > how i can parametre my screen into xorg.conf > > filename="Xorg.0.log" > > X.Org X Server 1.4.2 > Release Date: 11 June 2008 > X Protocol Version 11, Revision 0 > Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2) > Current Operating System: Linux usrv-raptor 2.6.26-2-sparc64 #1 > Tue Jan 12 22:16:05 UTC 2010 sparc64 > Build Date: 11 June 2009 10:44:40AM > [snip] > (II) UnloadModule: "mach64" > (EE) Screen(s) found, but none have a usable configuration. > > Fatal server error: > no screens found I believe that the problem is with your version of Xorg. I did not have a working X a year or two ago. As I already mentioned, I am now using this version: X.Org X Server 1.6.1.901 (1.6.2 RC 1) Release Date: 2009-5-8 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.27.2-dsa-usii sparc Debian Current Operating System: Linux ultra5 2.6.30-1-sparc64 #1 Wed Jul 8 01:18:17 UTC 2009 sparc Build Date: 14 May 2009 04:50:27PM xorg-server 2:1.6.1.901-2 (bui...@spontini) Try to upgrade to squeeze (testing) where I see that Xorg is now at 2:1.7.7-1. Regards, Howard E. -- To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/0n9ad7-52l@gonif.dnyndns.org
Re: configure ati chipset for Sun ultra 5
hi, i try with your xorg.conf minimal ! i have only one error into Xorg.0.log : >> (EE) Screen(s) found, but none have a usable configuration. i have an hitachi CM769ET screen ! resolution max 1600*1200 pixels. how i can parametre my screen into xorg.conf attached files : xorg.conf and Xorg.0.log Best regards philo Section "Device" >> Identifier "Generic Video Card" >> Option "UseFBDev" "true" >> EndSection >> >> Section "Monitor" >> Identifier "Generic Monitor" >> Option "DPMS" >> # IBM >> HorizSync 31.5-51 >> VertRefresh 43-60 >> EndSection >> >> Section "Screen" >> Identifier "Default Screen" >> Device "Generic Video Card" >> Monitor "Generic Monitor" >> DefaultDepth16 >>EndSection >> >> Section "ServerLayout" >> Identifier "Default Layout" >> Screen "Default Screen" >> EndSection X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2) Current Operating System: Linux usrv-raptor 2.6.26-2-sparc64 #1 Tue Jan 12 22:16:05 UTC 2010 sparc64 Build Date: 11 June 2009 10:44:40AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 30 14:41:47 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Generic Monitor" (**) | |-->Device "Generic Video Card" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) RgbPath set to "/etc/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (==) |-->Input Device "" (==) |-->Input Device "" (==) The core pointer device wasn't specified explicitly in the layout. Using the default mouse configuration. (==) The core keyboard device wasn't specified explicitly in the layout. Using the default keyboard configuration. (II) No APM support in BIOS or kernel (II) Loader magic: 0x1c0c78 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 1.4.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:01:0: chip 108e,5000 card , rev 13 class 06,04,00 hdr 81 (II) PCI: 00:01:1: chip 108e,5000 card , rev 13 class 06,04,00 hdr 81 (II) PCI: 01:01:0: chip 108e,1000 card , rev 01 class 06,80,00 hdr 80 (II) PCI: 01:01:1: chip 108e,1001 card , rev 01 class 02,00,00 hdr 80 (II) PCI: 01:02:0: chip 1002,4750 card , rev 5c class 03,00,00 hdr 00 (II) PCI: 01:03:0: chip 1095,0646 card 1095,0646 rev 03 class 01,01,8f hdr 00 (II) PCI: End of PCI scan (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:1:0), (0,2,255), BCTRL: 0x0023 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:1), (0,1,1), BCTRL: 0x0023 (VGA_EN is cleared) (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:2:0) ATI Technologies Inc 3D Rage Pro 215GP rev 92, Mem @ 0xe100/24, 0xe200/12, BIOS @ 0xe102/0 (II) Addressable bus resource ranges are (II) OS-reported resource ranges: (II) Active PCI resource ranges: [0] -1 1 0xe000 - 0xe01f (0x20) MX[B] [1] -1 1 0xf100 - 0xf100 (0x1) MX[B] [2] -1 1 0xf000 - 0xf000 (0x1) MX[B] [3] -1 1 0xe102 - 0xe102 (0x1) MX[B](B) [4] -1 1 0xe200 - 0xe2000fff (0x1000
Re: configure ati chipset for Sun ultra 5
On Sat, May 29, 2010 at 11:51:37AM +0200, philo wrote: > i do your recommandations, but i don't find "Busid" to xorg.conf. BusID "PCI:1:2:0" in the "Device" section, but I don't have it in my xorg.conf anymore. > usrv-raptor:/# lspci -v > > 01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro > 215GP (rev 5c) (prog-if 00 [VGA controller]) >Flags: stepping, medium devsel, IRQ 13 >Memory at e100 (32-bit, non-prefetchable) [size=16M] >I/O ports at fe01 [disabled] [size=1] >Memory at e200 (32-bit, non-prefetchable) [size=4K] >[virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] >[virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] >[virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] >Expansion ROM at fe01 [disabled] [size=1] >Kernel driver in use: atyfb Exactly the same as mine. >> $ lspci -v >> 01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro >> 215GP (rev 5c) (prog-if 00 [VGA controller]) >> Flags: stepping, medium devsel, IRQ 13 >> Memory at e100 (32-bit, non-prefetchable) [size=16M] >> I/O ports at fe01 [disabled] [size=1] >> Memory at e200 (32-bit, non-prefetchable) [size=4K] >> [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] >> [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] >> [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] >> Expansion ROM at fe01 [disabled] [size=1] >> Kernel driver in use: atyfb > have you tell about reference_clock ?? > > #Option "reference_clock" "29.5 MHz" > > The ati chipset on the ultra 5, sometimes need to have their > regerence_clock manually entered in. Your Ultra 5 could require one of > the following options > > Option "reference_clock" "14.318 MHz" > Option "reference_clock" "28.636 MHz" > Option "reference_clock" "29.5 MHz" > > For my Ultra 5 it used the 14.318 MHz option. So if one does not work, > try another one. I don't have that in my xorg.conf and never did. $ Xorg -version X.Org X Server 1.6.1.901 (1.6.2 RC 1) Release Date: 2009-5-8 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.27.2-dsa-usii sparc Debian Current Operating System: Linux ultra5 2.6.30-1-sparc64 #1 Wed Jul 8 01:18:17 UTC 2009 sparc Build Date: 14 May 2009 04:50:27PM xorg-server 2:1.6.1.901-2 (bui...@spontini) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. With this version of Xorg, X doesn't work here without an xorg.conf, but it DOES WORK at low resolution (640x480?) with a zero-length xorg.conf. I get better resolution when I put my monitor specs and default depth of 16 in xorg.conf. >> This minimal xorg.conf works for me with an old 15" SVGA monitor. >> >> $ cat /etc/X11/xorg.conf >> Section "Device" >> Identifier "Generic Video Card" >> Option "UseFBDev" "true" >> EndSection >> >> Section "Monitor" >> Identifier "Generic Monitor" >> Option "DPMS" >> # IBM >> HorizSync 31.5-51 >> VertRefresh 43-60 >> EndSection >> >> Section "Screen" >> Identifier "Default Screen" >> Device "Generic Video Card" >> Monitor "Generic Monitor" >> DefaultDepth16 >>EndSection >> >> Section "ServerLayout" >> Identifier "Default Layout" >> Screen "Default Screen" >> EndSection Regards, Howard E. -- To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100530091855.e21f08b...@mail.ncf.ca
Re: configure ati chipset for Sun ultra 5
Hi Howard, i do your recommandations, but i don't find "Busid" to xorg.conf. -- usrv-raptor:/# uname -a Linux usrv-raptor 2.6.26-2-sparc64 #1 Tue Jan 12 22:16:05 UTC 2010 sparc64 GNU/Linux - usrv-raptor:/# lspci -v 00:01.0 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 13) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 64 [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] Bus: primary=00, secondary=02, subordinate=ff, sec-latency=64 I/O behind bridge: -0fff Memory behind bridge: -000f Prefetchable memory behind bridge: -000f [virtual] Expansion ROM at fe01 [disabled] [size=1] 00:01.1 PCI bridge: Sun Microsystems Computer Corp. Simba Advanced PCI Bridge (rev 13) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 64 [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: -0fff Memory behind bridge: -000f Prefetchable memory behind bridge: -000f [virtual] Expansion ROM at fe01 [disabled] [size=1] 01:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01) Flags: bus master, medium devsel, latency 0 Memory at fe01 (32-bit, non-prefetchable) [size=1] Memory at fe01 (32-bit, non-prefetchable) [size=1] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] Expansion ROM at fe01 [disabled] [size=1] 01:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal 10/100 Ethernet [hme] (rev 01) Flags: bus master, medium devsel, latency 0, IRQ 12 Memory at e000 (32-bit, non-prefetchable) [size=28K] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] Expansion ROM at fe01 [disabled] [size=1] Kernel driver in use: hme Kernel modules: sunhme 01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c) (prog-if 00 [VGA controller]) Flags: stepping, medium devsel, IRQ 13 Memory at e100 (32-bit, non-prefetchable) [size=16M] I/O ports at fe01 [disabled] [size=1] Memory at e200 (32-bit, non-prefetchable) [size=4K] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] Expansion ROM at fe01 [disabled] [size=1] Kernel driver in use: atyfb 01:03.0 IDE interface: Silicon Image, Inc. PCI0646 (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Silicon Image, Inc. PCI0646 Flags: bus master, medium devsel, latency 64, IRQ 14 I/O ports at c0 [size=8] I/O ports at c8 [size=4] I/O ports at c00010 [size=8] I/O ports at c00018 [size=4] I/O ports at c00020 [size=16] [virtual] Memory at fe01 (32-bit, non-prefetchable) [disabled] [size=1] [virtual] Expansion ROM at fe01 [disabled] [size=1] Kernel driver in use: CMD64x_IDE Kernel modules: cmd64x usrv-raptor:/# --- attached files : xorg.conf and Xorg.0.log - have you tell about reference_clock ?? - #Option "reference_clock" "29.5 MHz" The ati chipset on the ultra 5, sometimes need to have their regerence_clock manually entered in. Your Ultra 5 could require one of the following options Option "reference_clock" "14.318 MHz" Option
Re: configure ati chipset for Sun ultra 5
On 2010-05-28, philo wrote: > i have installed debian R5 on ultra 5, HDD 40Go, 360 Mhz, 512 ram and > ATI pro rage video chipset. > i try to install fglrx ati driver but i don't know if it's run under > sparc64! > some one can give me a link about X-windows configuration for sparc64 > with ati chipset. On my ultra 5 I have: $ uname -a Linux ultra5 2.6.30-1-sparc64 #1 Wed Jul 8 01:18:17 UTC 2009 sparc GNU/Linux $ lspci -v 01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c) (prog-if 00 [VGA controller]) Flags: stepping, medium devsel, IRQ 13 Memory at e100 (32-bit, non-prefetchable) [size=16M] I/O ports at fe01 [disabled] [size=1] Memory at e200 (32-bit, non-prefetchable) [size=4K] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] [virtual] Memory at fe01 (32-bit, non-prefetchable) [size=1] Expansion ROM at fe01 [disabled] [size=1] Kernel driver in use: atyfb This minimal xorg.conf works for me with an old 15" SVGA monitor. $ cat /etc/X11/xorg.conf Section "Device" Identifier "Generic Video Card" Option "UseFBDev" "true" EndSection Section "Monitor" Identifier "Generic Monitor" Option "DPMS" # IBM HorizSync 31.5-51 VertRefresh 43-60 EndSection Section "Screen" Identifier "Default Screen" Device "Generic Video Card" Monitor "Generic Monitor" DefaultDepth16 EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" EndSection - I use setxkbmap in my .xinitrc for the keyboard. I believe there may be a better place to customize the keyboard, but off-hand I forget. Regards, Howard E. -- To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cjl6d7-64r@gonif.dnyndns.org
Re: configure ati chipset for Sun ultra 5
On Fri, May 28, 2010 at 05:29:35PM +0200, philo scribbled thusly: > Hi, > i have installed debian R5 on ultra 5, HDD 40Go, 360 Mhz, 512 ram and > ATI pro rage video chipset. > i try to install fglrx ati driver but i don't know if it's run under > sparc64! Isn't fglrx ATI/AMD's proprietary closed source driver? Last I checked they only supported i386 (although I guess they support amd64 too now). If you want them to support sparc, you'd have to take it up with them, but they're unlikely to care. Alternately, you could switch to the open source "ati" driver and it should just work. (Although you'll be missing out on the latest secret tricks to get that extra 1/2 FPS.) The Rage Pro is ancient and should be very well supported. (In fact, it's so old I don't know if fglrx even supports it on any platform.) Actually, I'm kind of surprised the autoconfiguration didn't set you up with the ati driver right out of the box. I thought lenny was new enough you didn't need to configure X manually any more. Ivan PS: For what it's worth, I avoid nvidia/ati proprietary drivers like the plague, and am rather biased against them in case you couldn't tell. ;) (To the point where I check http://dri.freedesktop.org when I'm buying a graphics card to make sure it will work with DRI.) -- To UNSUBSCRIBE, email to debian-sparc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20100528192731.gg3...@mrph.org
configure ati chipset for Sun ultra 5
Hi, i have installed debian R5 on ultra 5, HDD 40Go, 360 Mhz, 512 ram and ATI pro rage video chipset. i try to install fglrx ati driver but i don't know if it's run under sparc64! some one can give me a link about X-windows configuration for sparc64 with ati chipset. in attachement /etc/X11/xorg.conf and /var/log/Xorg.0.log best regards philo # xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "Files" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us" Option "XkbVariant""oss" Option "XkbOptions""lv3:ralt_switch" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device""/dev/input/mice" Option "Protocol" "ImPS/2" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "true" EndSection Section "InputDevice" Identifier "Synaptics Touchpad" Driver "synaptics" Option "SendCoreEvents""true" Option "Device""/dev/psaux" Option "Protocol" "auto-dev" Option "HorizEdgeScroll" "0" EndSection Section "InputDevice" Driver "wacom" Identifier "stylus" Option "Device""/dev/input/wacom" Option "Type" "stylus" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection Section "InputDevice" Driver "wacom" Identifier "eraser" Option "Device""/dev/input/wacom" Option "Type" "eraser" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection Section "InputDevice" Driver "wacom" Identifier "cursor" Option "Device""/dev/input/wacom" Option "Type" "cursor" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection Section "Device" Identifier "ATI Rage pro" Driver "ati" BusID "PCI:1:5:0" VideoRam64000 EndSection Section "Monitor" Identifier "HITACHI" Option "DPMS" HorizSync 30-70 VertRefresh 50-90 EndSection Section "Screen" Identifier "Default Screen" Device "ATI Rage pro" Monitor "Ãcran générique" DefaultDepth24 SubSection "Display" Modes "1280x1...@75" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" # Uncomment if you have a wacom tablet # InputDevice "stylus""SendCoreEvents" # InputDevice "cursor""SendCoreEvents" # InputDevice "eraser""SendCoreEvents" InputDevice "Synaptics Touchpad" EndSection X.Org X Server 1.4.2 Release Date: 11 June 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2) Current Operating System: Linux usrv-raptor 2.6.26-2-sparc64 #1 Tue Jan 12 22:16:05 UTC 2010 sparc64 Build Date: 11 June 2009 10:44:40AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 28 17:19:56 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "" (**) | |-->Device "ATI Rage pro" (==) No monitor specified for screen "Default Screen". Using a default monitor configuration. (**) |-->Input