Re: noyau 2.6.23 architecture k7
On 07.12.2007 20:04, Txo wrote: En ce vendredi 07 décembre 2007 à 18:51:03 C. Mourad Jaber nous susurrait : Bonjour, Bonjour J'ai vu l'apparition du noyau 2.6.23 dans SID, mais il semble que la version K7 n'est pas dans le lot ! Est-ce qu'il y a eu une fusion k7-686 au niveau de build ou y'a-t-il une raison particulière ? Sur http://packages.qa.debian.org/l/linux-2.6/news/20071205T003048Z.html ... [i386] Drop k7 images ... Comme il me semble qu'on peut traduire « drop » par « laisser tomber », cela est vraisemblable. ça je l'aurais compris, mais ce qui m'intéresserai c'est surtout d'en connaître la raison... et la solution de remplacement ! Je fait quelques recherches et il semblerai qu'un projet de réunification des architectures x86 est en cours... Du coup, j'ai testé, et le noyau 686 tourne à merveille sur l'architecture k7 ! @ + Mourad -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Problème demarrage noyau 2.6.23 [ etait] Freeze du système avec aireplay-ng
Bonjour à tous, Je reprend le fil dans une nouvelle voie. J'ai donc décidé de compiler un nouveau noyau 2.6.23, à l'aide du .config de mon noyau habituel, tous se passe bien, mais au démarrage il bloque à ce moment ci : Begin:Waiting for root file system usb-3:Bla bla j'ai bien reconnu ton périphérique . . . drivers /hid/usbhid/hid-core.c:v2.6:USB HID coredriver - Là il se bloque !! Je fais alt-Syst RSEIUO pour débloquer et rebouter. Les sources sont celles de kernel.org, avec le patch d'Ingo Molnar . Vous auriez une idée ? Merci P'tit Louis -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: grip : probleme avec cddb
GiGGz a écrit : dans la console d'erreur de grip (onglet etat), il te dit quoi ? est ce que d'autres progs utilisant la même chose fonctionnent ? Si oui alors ça vient de grip. As tu regardé modifié la conf de base ? Si oui essaye d'effacer tes fichiers de conf et de repartir de 0. j'ai regardé dans la console d'erreur et effectivement il ne trouvait pas freedb.freedb.org. j'ai mis cddb.cddb.org en serveur secondaire et depuis cela marche ! merci pour l'aide Sinon je suis abonné à la liste. po besoin de me répondre en privé. oups, erreur de parametrage de icedove :-[ Ciao Guillaume Gérard -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: noyau 2.6.23 architecture k7
C. Mourad Jaber, samedi 8 décembre 2007, 11:58:34 CET […] Bonjour, Bonjour ’jour, […] Du coup, j'ai testé, et le noyau 686 tourne à merveille sur l'architecture k7 ! Ça a toujours été le cas : le K7 est compatible i686 ( http://en.wikipedia.org/wiki/I686 ), donc qui peut le plus… On pourrait en revanche se demander s’il n’y aurait pas une sous-utilisation du K7 (la différence entre le « moins » assuré et le « plus » possible) mais je pense que toutes ces différences entre les architectures compatibles i686 sont maintenant gérées dynamiquement (activées au démarrage du noyau). -- Sylvain Sauvage
Re: Problème demarrage noyau 2.6.23 [etait] Freeze du système avec aireplay-ng
Salut, Je n'ai pas d'idée sur ton problème, mais il me semble si je me trompe que ton .config venait d'une 2.6.18, si c'est cela lorsque tu changes de version de noyau il est prudent de faire d'abord un make oldconfig. A+ Philippe MERLIN Le samedi 8 décembre 2007, Petit Louis a écrit : Bonjour à tous, Je reprend le fil dans une nouvelle voie. J'ai donc décidé de compiler un nouveau noyau 2.6.23, à l'aide du .config de mon noyau habituel, tous se passe bien, mais au démarrage il bloque à ce moment ci : Begin:Waiting for root file system usb-3:Bla bla j'ai bien reconnu ton périphérique . . . drivers /hid/usbhid/hid-core.c:v2.6:USB HID coredriver - Là il se bloque !! Je fais alt-Syst RSEIUO pour débloquer et rebouter. Les sources sont celles de kernel.org, avec le patch d'Ingo Molnar . Vous auriez une idée ? Merci P'tit Louis
Re: Freeze du système avec aireplay-ng
Le Sat, 08 Dec 2007 00:05:52 +0100 Petit Louis [EMAIL PROTECTED] a écrit: Utilise au moins les Hotkeys: Alt_Sys S puis, Alt-sys I, Alt-sys 6 puis Alt-sys O Petit problème, après un nouveau gel, même les hotkeys ne marche pas !! Il serait intéressant de faire un debug avec des printk bien placés dans le madwifi. Ça suggère un problème d'interruption cette histoire. Peut être en regardant les options du noyau acpi_generic_hotkey, irqfixup et irqpoll -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: paquets pcscd, pcsc-tools
Gaëtan PERRIER, samedi 8 décembre 2007, 01:05:11 CET Bonjour, ’jour, J'ai un lecteur de SD sur mon PC fixe et mon portable et ils semblent correctement fonctionner sans ces paquets. Je me demande à quoi ils peuvent bien servir? SC = smart card = carte à puce. De plus, cela semble principalement s’adresser aux lecteurs de carte à puce USB (voir la liste dans la description de libccid). -- Sylvain Sauvage
Re: serveur infecté?
david . a écrit : ... INFECTED (PORTS: 1524 4000 4369 6667 31337) eth1: PACKET SNIFFER(/sbin/dhclient3[1823], /usr/sbin/iftop[3021]) Warning: Possible Scalper Worm installed il les prend tous les 2 pour des sniffers... ce qui est qq part vrai: dhclient3 sniffe les packets de proposition de lease, et iftop sniffe tout puisqu'il sert à afficher les infos de bande passante sur une I/F réseau Je me suis donc tout de suite empressé d'installer clamav (j'ai bien mis clamav à jour) pour faire le menage et il ne trouve rien (clamscan -ri /) Pour info je n'ai pas de parefeu sur le système mais sur ma box. ça ne peut pas faire de mal et tu peux ajouter un crontab pour qu'il aille faire un scan des binaires pendant la nuit si ça te sécurise. j'ai laissé tomber chkrootkit à cause de cela: beaucoup trop de faux positifs. D'ailleurs il n'y-a, d'habitude, que des packages standards sur un serveur, donc le risque d'infection est réduit; en plus il est dans ton LAN, ce qui réduit encore les risques (personnels, pas professionnels:) -- Go not to the elves for counsel, for they will say both yes and no. -- J.R.R. Tolkien
Re: Tunnel SSH persistant (autossh ?)
David BERCOT wrote: Bonjour, Il me semble avoir déjà posé la question (sans gros résultat il est vrai ;-))), alors je retente ma chance... Je crée un tunnel SSH pour accéder à ma messagerie. Exemple : ssh -N -f monserveur -L9110:pop.orange.fr:110 Tout marche très bien car les messages sont relevés toutes les 2 minutes environ. En revanche, pour la partie SMTP, c'est différent ! Je n'envoie pas de message toutes les 2 minutes et donc, le tunnel arrête de fonctionner au bout d'un certain temps. J'ai donc essayé avec autossh, mais celui-ci ne semble fonctionner qu'avec localhost. Exemple : autossh -M 20010 -N -f monserveur -L9025:127.0.0.1:25 Dans ce cas, il utilise comme relais SMTP, mon serveur. Mais je voudrais attaquer directement le VRAI serveur SMTP de mon provider... tu peux toujours configurer ton serveur smtp pour qu'il relaye à ton ISP. Une autre approche consiste à utiliser ton serveur smtp directement (sans tunnel): tu le configures pour qu'il écoute sur le port 587 (submission), avec de l'authentification (SASL) et du TLS. c'est certes plus lours à mettre en place qu'un petit tunnel, mais si d'aventure l'exercice te tente... Auriez-vous une idée pour que mon tunnel reste ouvert en permanence, même en cas d'inactivité ? c'est probablement ta box qui coupe la connexion (si elle fait du filtrage stateful, elle utilise des timeouts pour vider sa table d'états). tu peux configurer ton client ssh pour qu'il envoie des ping toutes les N secondes. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: vlc caméra sur ip
Merci pour la réponse... J'ai éffectivement testé ce type d'url rtsp://username:[EMAIL PROTECTED]:port/ Cela n'a pas fonctionné... D'après ce que j'ai pu lire sur différents forums cet adressage a fonctionné dans la version VLC 0.85 mais provoque un message d'erreur avec la nouvelle version (celle que j'utilise est la 0.86a) Hugues LARRIVE a écrit : eric gibault a écrit : Bonjour, Je ne peux accéder avec vlc à la caméra sur ip que sans identifiant et mot de passe administrateur faute de quoi j'ai le message d'erreur suivant... Received DESCRIBE response: RTSP/1.0 401 Unauthorized CSeq: 4 WWW-Authenticate: Basic realm=RTSP server Je cherche donc à trouver la ligne de commande sous vlc qui inclus l'identifiant et le mot de passe. As-tu essayé de les mettre dans l'uri ? genre : rtsp://username:[EMAIL PROTECTED]:port/ je ne peux pas prendre le risque de laisser l'interface administrateur de la caméra sans contrôle d'accès ! Merci Cordialement Eric Gibault -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Imprimante : Lexmark E120n
Bonjour, J'ai des problèmes pour faire marcher mon imprimante Lexmark E120. J'essaie de la configurer l'imprimante via le Centre de configuration de KDE Je me met en mode superutilisateur et je fait ajouter une imprimante / une classe , ensuite Imprimante réseau avec IPP (IPP/HTTP), je rentre l'IP de l'imprimante, comme pilote je choisis celui generic PCL 6/PLC XL Printer (Foomatic + pxlmono), Pas de bannière , Pas de quotas, aucun utilisateurs rejetés et je rentre les informations générales (nom, description, Emplacement) et je valide. J'obtiens : Impossible de créer l'imprimante. Message d'erreur renvoyé par le gestionnaire : L'opération demandée n'a pas pu être achevée. Voila je ne sais pas trop quoi faire je comprends pas vraiment le message. Merci de m'aider.
Re: webmeeting
Bonjour, peut être voir aussi du côté de Dimdim : http://www.framasoft.net/article4608.html ou www.dimdim.com ça permet de faire des réunions à distances. Hugo Le 04/12/07, Fabien R [EMAIL PROTECTED] a écrit : Hugues LARRIVE wrote: humour Pourquoi ne pas simplement mettre ta webcam face à l'écran ? /humour Je n'y avais pas pensé :-P Le plus simple pour montrer son écran (donc n'importe quel document) à distance c'est vino dans gnome : BureauPréférencesBureau à distance. C'est un serveur vnc, on peut protéger l'accès par mot de passe, refuser les souris et clavier du client, et il accepte plusieurs connexion simultanées. Après il y a tous les trucs autour de vnc : x11vnc qui fait la même chose que vino mais je crois qu'il a un serveur d'applet java en plus, les serveurs vnc indépendants de l'affichage (vncserver, vnc4server, tightvncserver), xrdp qui adapte un service vnc aux client Bureau distant de windows... Le problème je crois avec le vnc c'est que la bande passante consommée sur le serveur est proportionnelle au nombre de clients connectés. Pour un grand nombre de clients il y a vlc, avec la commande suivante sur le serveur : vlc screen:// --sout '#transcode{vcodec=mp4v}:standard{access=http,mux=ts}' les clients peuvent voir l'écran du serveur en ouvrant http://adresse_du_serveur:8080/ avec vlc. Le résultat n'est pas aussi bon qu'avec vnc pour un petit nombre de clients mais vlc est capable de diffuser en rtp multicast, on peut monter des relais, etc. Je vais essayer de creuser la solution vlc. Merci, - Fabien -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
comment réparer partition ext3 ?
Bonjour, J'ai un petit souci (petit, petit quand même). J'ai une partition ext3 out. Elle ne peut plus être montée (ennuyeux c'est ma partition home/), j'y ai des données que je n'aimerais pas perdre. J'ai essayé un e2fsck /dev/sda1 -b 8193 mon superblock est invalide... Un tuyau, conseil, (même un encouragement) je suis préneur ! Merci -- Partagez et publiez vos images avec http://partage-images.net Et pourquoi pas visiter http://cerisier.info -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
[etch] Pb de mise a jour aptitude
Bonjour, Depuis quelque temps aptitude ne met plus a jour mon système. J'ai le message suivant : Suppression de libgmime-2.0-2 ... ldconfig: Writing of cache data failed: No space left on device dpkg : erreur de traitement de libgmime-2.0-2 (--remove) : le sous-processus post-removal script a retourné une erreur de sortie d'état 1Suppression de libmono0 ... ldconfig: Writing of cache data failed: No such file or directory dpkg : erreur de traitement de libmono0 (--remove) : le sous-processus post-removal script a retourné une erreur de sortie d'état 1Des erreurs ont été rencontrées pendant l'exécution : libgmime-2.0-2 libmono0 Pensant a un problème d'espace disque un df donne Sys. de fich.1K-blocs Occupé Disponible Capacité Monté sur tmpfs95840 0 95840 0% /lib/init/rw udev 1024068 10172 1% /dev tmpfs95840 0 95840 0% /dev/shm rootfs 255912255909 0 100% / /dev/hda9 70247896 14914576 51764884 23% /home /dev/hda8 369000 12515336825 4% /tmp /dev/hda5 4807056 2733780 1829092 60% /usr /dev/hda6 2885780353416 2385776 13% /var Merci de vos suggestions. Katukav -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: comment réparer partition ext3 ?
Le Saturday 08 December 2007 20:21:36 m.jem, vous avez écrit : Bonjour, J'ai un petit souci (petit, petit quand même). J'ai une partition ext3 out. Elle ne peut plus être montée (ennuyeux c'est ma partition home/), j'y ai des données que je n'aimerais pas perdre. J'ai essayé un e2fsck /dev/sda1 -b 8193 mon superblock est invalide... un encouragement : le superblock est stocké à plusieurs endroits sur le disque, on peut utiliser une version de copie... mais je ne me rappelle plus comment, ça ne m'est arrivé qu'une fois, et il y a trop longtemps pour que ma mémoire s'en rappelle dans les détails... bon courage.. JMB Un tuyau, conseil, (même un encouragement) je suis préneur ! Merci -- Partagez et publiez vos images avec http://partage-images.net Et pourquoi pas visiter http://cerisier.info signature.asc Description: This is a digitally signed message part.
Re: [etch] Pb de mise a jour aptitude
Bonjour, La ligne : rootfs 255912255909 0 100% / Monte que tu n'a plus de place sur ton / . fait un aptitude clean, cela va vider ton cache aptitude, et cela te fera de la place. Alex katukav a écrit : Bonjour, Depuis quelque temps aptitude ne met plus a jour mon système. J'ai le message suivant : Suppression de libgmime-2.0-2 ... ldconfig: Writing of cache data failed: No space left on device dpkg : erreur de traitement de libgmime-2.0-2 (--remove) : le sous-processus post-removal script a retourné une erreur de sortie d'état 1Suppression de libmono0 ... ldconfig: Writing of cache data failed: No such file or directory dpkg : erreur de traitement de libmono0 (--remove) : le sous-processus post-removal script a retourné une erreur de sortie d'état 1Des erreurs ont été rencontrées pendant l'exécution : libgmime-2.0-2 libmono0 Pensant a un problème d'espace disque un df donne Sys. de fich.1K-blocs Occupé Disponible Capacité Monté sur tmpfs95840 0 95840 0% /lib/init/rw udev 1024068 10172 1% /dev tmpfs95840 0 95840 0% /dev/shm rootfs 255912255909 0 100% / /dev/hda9 70247896 14914576 51764884 23% /home /dev/hda8 369000 12515336825 4% /tmp /dev/hda5 4807056 2733780 1829092 60% /usr /dev/hda6 2885780353416 2385776 13% /var Merci de vos suggestions. Katukav -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: comment réparer partition ext3 ?
Le Sat, 08 Dec 2007 20:21:36 +0100 m.jem [EMAIL PROTECTED] a écrit: Bonjour, J'ai un petit souci (petit, petit quand même). J'ai une partition ext3 out. Elle ne peut plus être montée (ennuyeux c'est ma partition home/), j'y ai des données que je n'aimerais pas perdre. J'ai essayé un e2fsck /dev/sda1 -b 8193 mon superblock est invalide... Un tuyau, conseil, (même un encouragement) je suis préneur ! Merci * Si elle ne peut être monter, peut être que c'est la table de partition qui est mauvaise: = testdisk. * Si la table de partition est bonne, il faut essayer effectivement fsck: fsck /dev/sda1 -b n+1 où n est 8192, 32768, 65536, voire 131072 François Boisson -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: comment réparer partition ext3 ?
Le Saturday 08 December 2007, m.jem(m.jem [EMAIL PROTECTED]) a écrit: Bonjour, Bonsoir, J'ai essayé un e2fsck /dev/sda1 -b 8193 mon superblock est invalide... Pourquoi utilisez-vous '-b'? Cette option l'utilisation d'un SB alternative. Avez-vous essayé sans '-b'? A+ -- http://www.glennie.fr Un homme est la somme de ses actes, de ce qu’il fait, de ce qu’il peut faire. Rien d’autre. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
commande ajouter un utilisateur à vlc
Bonsoir, Je cherche la commande pour ajouter un utilisateur à vlc. Enfin existe t-il une commande qui permet de connaître le groupe correspondant à chaque application? Merci EG -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: comment réparer partition ext3 ?
Merci pour les encouragements et les tuyaux, les testdisk ? chez moi command no found, pas d'entrée pour man sinon : un fsck.ext3 -b n+1 /mon périph me renvoie la désolation à chaque fois. le superbloc a un journal ext3 invalide et un fsck.ext3 : illegal inode number lors de la vérification du journal ext3 pour /xome et un fsck.ext3 -f -p /mon périph me renvoie quand à lui un : corruption repérée dans le superbloc (inode_per_group..) et un fsck -c /mon périph pour marquer les secteurs défectueux me laisse penser qu'il ne repère pas de secteur défectueux par sa réponse : 0 François Boisson a écrit : Le Sat, 08 Dec 2007 20:21:36 +0100 m.jem [EMAIL PROTECTED] a écrit: Bonjour, J'ai un petit souci (petit, petit quand même). J'ai une partition ext3 out. Elle ne peut plus être montée (ennuyeux c'est ma partition home/), j'y ai des données que je n'aimerais pas perdre. J'ai essayé un e2fsck /dev/sda1 -b 8193 mon superblock est invalide... Un tuyau, conseil, (même un encouragement) je suis préneur ! Merci * Si elle ne peut être monter, peut être que c'est la table de partition qui est mauvaise: = testdisk. * Si la table de partition est bonne, il faut essayer effectivement fsck: fsck /dev/sda1 -b n+1 où n est 8192, 32768, 65536, voire 131072 François Boisson -- Partagez et publiez vos images avec http://partage-images.net Et pourquoi pas visiter http://cerisier.info
commande ajouter un utilisateur à vlc
Bonsoir, Je cherche la commande pour ajouter un utilisateur à vlc. Enfin existe t-il une commande qui permet de connaître le groupe correspondant à chaque application? Merci EG -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: paquets pcscd, pcsc-tools
Le Sat, 8 Dec 2007 14:13:43 +0100 Sylvain Sauvage [EMAIL PROTECTED] a écrit: Gaëtan PERRIER, samedi 8 décembre 2007, 01:05:11 CET Bonjour, ’jour, J'ai un lecteur de SD sur mon PC fixe et mon portable et ils semblent correctement fonctionner sans ces paquets. Je me demande à quoi ils peuvent bien servir? SC = smart card = carte à puce. De plus, cela semble principalement s’adresser aux lecteurs de carte à puce USB (voir la liste dans la description de libccid). Merci. Gaëtan -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
checkfs.sh et -C0
Bonjour, Il y a un petit truc qui m'intrigue lors du boot. J'ai 2 disques sda et sdb. Sur sda il y a les partoches du systèmes et sur sdb il y a juste /home. Quand checkfs.sh s'exécute sur les partoches de sda ça se traduit par un e2fsck avec l'option -C0 affichant ainsi une barre de progression mais quand c'est sur sdb il n'y a pas l'option -C0. Comment cela se fait-il? Gaëtan -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bluetooth et Debian
Bonjour, J'ai un portable Dell avec un module Bluetooth Broadcom BCM2045B2 que je n'arrive pas à faire fonctionner. Un lsusb me donne : Bus 001 Device 022: ID 0a5c:4503 Broadcom Corp. Bus 001 Device 021: ID 0a5c:4502 Broadcom Corp. Bus 001 Device 020: ID 0a5c:4500 Broadcom Corp. dellWirelessCtl -i me donne: Radio Status for Bluetooth: Bluetooth supported Bluetooth installed Bluetooth enabled Status Code: 0 Tous semble donc ok jusque là. J'ai installé les paquets: bluez-firmware bluez-utils bluez-hcidump bluez-gnome btscanner gnome-bluetooth libbluetooth2 libgnomebt0 J'ai fais un modprobe hci_usb et dans syslog j'ai: Dec 8 14:14:44 portable-gpe hcid[3812]: Bluetooth HCI daemon Dec 8 14:14:44 portable-gpe kernel: Bluetooth: Core ver 2.11 Dec 8 14:14:44 portable-gpe kernel: NET: Registered protocol family 31 Dec 8 14:14:44 portable-gpe kernel: Bluetooth: HCI device and connection manager initialized Dec 8 14:14:44 portable-gpe kernel: Bluetooth: HCI socket layer initialized Dec 8 14:14:44 portable-gpe hcid[3812]: Starting SDP server Dec 8 14:14:44 portable-gpe kernel: Bluetooth: L2CAP ver 2.8 Dec 8 14:14:44 portable-gpe kernel: Bluetooth: L2CAP socket layer initialized Dec 8 14:14:44 portable-gpe hcid[3812]: Created local server at unix:abstract=/var/run/dbus-WEu9oL6kCv,guid=5f53960ad3e5ef97dd832d00475a98c4 Dec 8 14:14:45 portable-gpe kernel: Bluetooth: RFCOMM socket layer initialized Dec 8 14:14:45 portable-gpe kernel: Bluetooth: RFCOMM TTY layer initialized Dec 8 14:14:45 portable-gpe kernel: Bluetooth: RFCOMM ver 1.8 [...] Dec 8 14:15:12 portable-gpe hcid[3812]: Default passkey agent (:1.16, /org/bluez/passkey) registered Dec 8 14:15:12 portable-gpe hcid [3812]: Default authorization agent (:1.16, /org/bluez/auth) registered Dec 8 14:15:14 portable-gpe NetworkManager: info Updating allowed wireless network lists. Dec 8 14:17:01 portable-gpe /USR/SBIN/CRON[4679]: (root) CMD ( cd / run-parts --report /etc/cron.hourly) Dec 8 14:18:05 portable-gpe kernel: Bluetooth: HCI USB driver ver 2.9 Dec 8 14:18:05 portable-gpe kernel: usbcore: registered new interface driver hci_usb [...] mais un hcitool scan me retourne: Device is not available: No such device et je n'ai pas de /dev/hciX de créé. Bref ça ne marche pas. Pourtant une recherche sur internet semble indiquer qu'avec une Ubuntu 7.10 ce même module BT sur le même protable fonctionne ... Quelqu'un aurait-il une idée du problème? Gaëtan -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Bluetooth et Debian
Le dimanche 9 décembre 2007 04:07, Gaëtan PERRIER a écrit : Bonjour, J'ai un portable Dell avec un module Bluetooth Broadcom BCM2045B2 que je et je n'ai pas de /dev/hciX de créé. Bref ça ne marche pas. Pourtant une recherche sur internet semble indiquer qu'avec une Ubuntu 7.10 ce même module BT sur le même protable fonctionne ... Quelqu'un aurait-il une idée du problème? Gaëtan Salut, Regarde dans cette page, section Bluetooth, tu y trouveras peut être une réponse... http://www.aptget.net/index.php?option=com_contenttask=viewid=123Itemid=251 @++
last debian
bonjour. j'ai pu acheter il ya quelque temps un linux max contenant les dernieres version de debian. quatre dvd . tous bootent mais aucun ne peut etre installé. je possede un micro packardbell amd athlon. je ne comprends ppas toujours. longtemps j'ai fonctionne avec la version sarge. que je ne peut plus installer. en ce moment c'est ubuntu. c'est pas mal mais je prefere la debian pure qui est tres performante. je veux bien m'abonner au devellopement debian. pour quelle fonction...? merci de me contacter et d'eventuellement m'aider a faire installer la debian 4.merci
Re: Podstawy PostgreSQL 8
1. Root bazy (owner) W MySQL rootem jest login root (siedzi w bazie MySQL), jak jest w PostgreSQL, kto jest rootem? postgres 2. Logowanie MySQL: mysql -u root -p PostgreSQL: Do tej pory robiłem tak, że su na użytkownika systemowego postgres i wtedy psql, bo jak robiłem tak: psql nazwa_bazy # psql -U postgres -W Password for user postgres: psql: FATAL: Ident authentication failed for user postgres pomimo dobrego hasła, o co chodzi? pomimo że lokujesz się lokalnie musisz być dodany do pg_hba.conf 3.Prawa MySQL: grant all on db_name.* to admin_bazy identified by 'haselo'; i już mam roota bazy, co w większości przypadków mi wystarcza, przy czym automatycznie tworzony jest użytkownik z takim hasłem, jak można uzyskać to samo pod PostgreSQL, czyli stworzyć bazę i stworzyć roota dla tej bazy? zobacz jak wyżej, najpierw trzeba dodać uprawnienia w pg_hba.conf a jeszcze wcześniej stworzyć użytkownika poprzez createuser -- Pozdrawiam Pozdrawiam Pawel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Instalator Etch R1 vs IBM System x3550
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Artur Jankowski napisał(a): Instalowałem deba m. in. na x346 - nie było specjalnych problemów poza oczywiśćie IBM ServeRAID, który okazał się niczym innym jak adaptecowskim U320 HostRAID. [...] Będę miał dokładnie coś w podobie jak u Ciebie i podobne mam przekonania. Dzięki za feedback. Znając IBMa, stawiam na Adapteca :) Jak Adaptec to problem z głowy... A teraz praca domowa: www.ibm.com i poczytać o: [...] (a wygrzebałem to w konfiguratorze tego serwerka) Dzięki, musiałem przeoczyć, zassałem tylko pedeefa ze specyfikacją do konfiguratora nie dobrnąłem. Pracę odrobię :-) - -- Pozdrawiam Krzysztof Jastrzębski Jotka Usługi Informatyczne jotka[at]jastrzebscy[dot]pl http://jotka.jastrzebscy.pl/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFHWpR1gzQmZ4O8YgkRAra9AKC5MOLgEJcUcTM/iiU7ANoRyxYGggCdFrwQ C+ENvUGLbxaBrQF6GyWQuBc= =ph2A -END PGP SIGNATURE- -- A co by bylo, gdybys to TY rzadzil? Kliknij http://link.interia.pl/f1c91 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Podstawy PostgreSQL 8
Dnia sobota, 8 grudnia 2007 01:25, Jarek Buczyński napisał: 1. Root bazy (owner) W MySQL rootem jest login root (siedzi w bazie MySQL), jak jest w PostgreSQL, kto jest rootem? Z konta root (systemowego) wydajesz polecenie createuser nazwa_użytkownika Shall the new user be allowed to create databases? (y/n)y Shall the new user be allowed to create more new users? (y/n)y Password: i już masz administratora baz 2. Logowanie MySQL: mysql -u root -p PostgreSQL: Do tej pory robiłem tak, że su na użytkownika systemowego postgres i wtedy psql, bo jak robiłem tak: # psql -U postgres -W Password for user postgres: psql: FATAL: Ident authentication failed for user postgres pomimo dobrego hasła, o co chodzi? Musisz odpowiednio edytować plik pg_hba.conf Z tego co widzę na lokalne połączenia masz wybraną opcję identyfikacji użytkowników z wykorzystaniem serwera ident. Ident authentication failed inne opcje to : - trust - z bazą danych łączy się użytkownik godny zaufania (z konta systemowego użytkownika wpisujesz psql nazwa_bazy bez hasła) - password musisz podać hasło aby się połączyć z bazą (przydatne jeśli chcesz używać php aby się łączyć z bazą) -crypt to samo co password ale hasło będzie przesyłane w formie zaszyfrowanej -reject odrzucanie połączeń do tej bazy danych dodatkowo do host i hostssl można użyć : ident krb4 krb5 Plik ma postać : local all trust hostall 127.0.0.1 255.255.255.255 trust local - gniazdo unixowe host - połączenie po TCP/IP all wszystkie bazy danych lub konkretna nazwa bazy 3.Prawa MySQL: grant all on db_name.* to admin_bazy identified by 'haselo'; i już mam roota bazy, co w większości przypadków mi wystarcza, przy czym automatycznie tworzony jest użytkownik z takim hasłem, jak można uzyskać to samo pod PostgreSQL, czyli stworzyć bazę i stworzyć roota dla tej bazy? -- Bazę tworzysz albo z konta systemowego : createdb -U nazwa_uzytkownika nazwa_bazy Password: CREATE DATABASE lub psql template1 CREATE DATABASE nazwa Domyślnie tylko właściciel bazy danych ma dostęp do tabel bazy danych. Dla reszty użytkowników musisz użyć polecenia GRANT. Pozdrawiam -- Sebastian Domanski Klucz PGP można wyszukać i pobrać z http://stinkfoot.org:11371/ pgp8kfEZbAcLr.pgp Description: PGP signature
PHP5 CLI - Fatal error: Call to undefined function mysql_connect()
Cześć, Podczas uruchamiania skryptów z linii komend jako zwykły użytkownik pojawiają sie błędy: --- $ php -f runme.php Fatal error: Call to undefined function mysql_connect() --- Wykonanie tego samego jako root przechodzi bez bledu. Ewentualnie uruchomienie z poziomu przegladarki www również działa. Wiem gdzie jest problem tylko nie wiem jak sobie z nim poradzić: #jako zwykły użytkownik - BRAK mysql $php -m json libxml mbstring mime_magic ncurses # jako root - JEST mysql # php -m json libxml mbstring mime_magic mysql mysqli ncurses Zainstalowane php5-cli W /etc/php5/cli/php.ini zakomentowane ;extension=mysql.so ponieważ po od komentowaniu dalej nie działa oraz pojawia sie dodatkowy komunikat przy uruchamianiu jako root: PHP Warning: Module 'mysql' already loaded in Unknown on line 0 Wiec zakomentowalem. Dodam jeszcze ze w /etc/php5/apache2/php.ini również mam zakomentowane ;extension=mysql.so a z poziomu przeglądarki można łączyć sie do bazy. PHP 5.2.0-8+etch7 (cli) (built: Jul 2 2007 21:46:15) Copyright (c) 1997-2006 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2006 Zend Technologies Jeśli ktoś może to bardzo proszę o pomoc, dzięki. -- Pozdrawiam
offopic? - Problema con disco NDAS a través de AP Conceptronic
Buenas a todos :) Creo que es algo offtopic este tema; aunque el problema me llega a un único ordenador con Debian, después de una investigación, el problema parece hallarse en un punto de acceso WiFi en modo cliente. Pero paso a explicarlo de todos modos. Cualquier ayuda o punto de vista es de agradecer. Veamos. Compré ayer un disco NDAS sin saberlo (en el media markt). Es un disco externo de estos que puedes ver películas en la tele. Además, tiene una tarjeta de red con la que se suponía que se podía acceder a los datos. Pensé que se trataba de NAS o SMB o FTP... pero nada de eso. Me tocó NDAS (ni lo conocía) que es una idea similar al NAS, pero a nivel de enlace. Entonces, este aparato, se comunica con los PC's sin pasar por TCP/IP, parece que reconoce lo que hay conectado por su dirección MAC. En teoría lo enchufas, y voilá. Funciona. He conseguido hacerlo funcionar a través de una red de cable y de la wfifi, todo ello usando un Router Linksys a modo de switch y punto de acceso. Bien, hasta aquí todo correcto. Ahora, en mi habitación, tengo un punto de acceso conceptronic, que está en modo cliente para traducir la WiFi al cable. Éste cable pasa a un switch y de ahí sirve a mi equipo. He llegado a probar el dispositivo NDAS conectado en cable a mi Switch. Funciona perfectamente. Ahora bien, el aparato funciona por WiFi, pero cuando se trata de la WiFi recibida por el AP Conceptronic, no hay forma. No está conectado. Deduzco que el punto de acceso conceptronic es incapaz de enviar y recibir peticiones de tan bajo nivel, o que no tiene constancia de que direcciones MAC hay en cada lado. Pero como no tengo la menor idea de cómo funcionan las redes a tan bajo nivel, y tampoco encuentro ninguna configuración relevante en el AP conceptronic, estoy totalmente vendido. Si alguien tiene alguna idea o sugerencia... sería de agradecer. También estoy pensando en adquirir otro router Linksys y usarlo a modo de AP en lugar del conceptronic. (Si esto funcionara, claro) Un Saludo, David.
Re: Compiz - Sin Bordes en las ventanas (SOLUCIONADO)
Buenas Lista, Ya he dado con la solución del problema, puesto que usé unicamente los repos de debian etch he tenido que correr este comando para que me muestre los bordes de las ventanas: gconftool-2 --recursive-unset /apps/compiz compiz --replace Corre perfecto!!! Debian Etch Amd64 Nvidia (Legacy) Saludos
¿cómo listar paquetes mal instalados? ¿y que se van a actualizar?
Hola. He estado buscando y no encuetro nada de esto. Lo primero decir que uso la Sarge 3.1. Si usas el programa kpackage y le das a listar los ficheros que forman parte de un paquete, en caso que un fichero que forma parte del paqute no esté aparece con una X roja, en otro caso una marca verde. El problema de esto es tener que ir paquete por paquete viendo. ¿Alguien sabe hacer esto de forma automática a todos los paqutes instalados? ¿Hay por línea de comandos una forma de listar los ficheros que le faltan a un paquete instaldo? Otra pregunta. Me gustaría listar los paquetes que se pueden actualizar una vez hecho aptitude update. Es decir, si ejecutas aptitude update y lanzas kpackge, puedes ir a la pestaña de actulizados y se muestran los que se pueden actualizar. ¿Por línea de comandos se puede hacer la misma lista de paqutes? Gracias a todos.
Re: Acceso a la OBP en Debian Sparc
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 El viernes 07 de diciembre del 2007 a las 00:14:21, David escribió: Estoy usando Debian GNU/Linux en un equipo UltraSparc y me gustaría poder obtener un OBP usando un teclado estándar de PC. Probe haciendo un shutdown o init 0 pero el equipo se apaga completamente. Probá con HALT . Con Solaris al menos funciona. no creo que ñlo hallan modificado Gracias por responder, David. Envío la respuesta porque acá, ya que parece que solo me llegó a la cuenta personal y quizás a alguien más pueda serle de utilidad. Les cuento lo que estuve probando. Una forma de obtener un prompt de OpenBoot es conectarse por telnet a la máquina en la cual queremos acceder al OpenBoot. Luego, salir de telnet usando CTRL + ]. Esto, si bien sale del telnet, aún deja la sesión en segundo plano sobre la máquina. Lo cual se puede comprobar presionando return. Entonces, tecleamos send brk desde telnet. De esta manera, obtenemos un prompt de OpenBoot. Para volver al sistema operativo, usamos el comando go. Por otra parte, para hacer que el equipo se quede en el OpenBoot luego de haber bajado Debian GNU/Linux, probé editando el archivo /etc/default/halt cambiando poweroff por halt, lo cual me hace pensar que escribiendo halt, como me sugerías, también hubiese funcionado. Lo que estaría bueno también saber para tener todo el esquema completo de lugares de donde poder pasarse a la OpenBoot es cómo hacerlo cuando se inicia el equipo. Noté que una vez que arranca, después de hacer una comprobación de la memoria, se queda en el prompt de OpenBoot. Pero al darle un enter directamente arranca el sistema operativo. ¿Alguna idea? Saludos, Daniel -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFHWp5aZpa/GxTmHTcRAjlcAJ4gtym08UUGtPgx3uTnc6qZsGAW/gCfSspm cAgNRnaefHKrWDbhNjZ7yQc= =32Qu -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ¿cómo listar paquet es mal instalados? ¿y que se van a actualizar?
On Sat, Dec 08, 2007 at 05:32:51PM +0100, Jaime Arias wrote: ¿Hay por línea de comandos una forma de listar los ficheros que le faltan a un paquete instaldo? Instala el paquete debsums. Te da no solo la lista de ficheros faltantes sino también la de modificados (desafortunadamente, no sirve con unos cuantos paquetes, que no incluyen las sumas de verificación necesarias). Otra pregunta. Me gustaría listar los paquetes que se pueden actualizar una vez hecho aptitude update. Es decir, si ejecutas aptitude update y lanzas kpackge, puedes ir a la pestaña de actulizados y se muestran los que se pueden actualizar. ¿Por línea de comandos se puede hacer la misma lista de paqutes? aptitude upgrade signature.asc Description: Digital signature
Re: nautilus
Delier Quijada wrote: El vie, 07-12-2007 a las 13:20 +0100, Fernando Codesal Bravo escribió: Hola: Tengo un problema con algunos archivos en nautilus, si intento ver las propiedades de estos archivos (mp3 y jpg ) se cierra el nautilus y se reinicia sin sacar la ventana de propiedades. En el mismo directorio tengo otros archivos que no tienen ese problema. En consola hago un file archivo_problematico sin errores . Si alguien puede indicarme por donde tirar . Bueno yo también tenÃa ese problema, lo que ice fue apuntar temporalmente mis repositorios a unstable y actualizar nautilus solamente, para esos menesteres es mejor usar aptitude. [EMAIL PROTECTED]:~$ dpkg -l | grep nautilus ii nautilus 2.20.0-2 file manager and graphical shell for GNOME ii nautilus-data2.20.0-2 data files for nautilus Por cierto el problema también me ocurrÃa con evolution que también actualice de Sid, cuando trato de cambiar las preferencias, es posible que el problema sea también con gconf ¿Alguien se anima a abrir un bug? ;-) Ya está reportado... If you have any questions why you received this email, please see the text at the end of this email. Replies to this email are NOT read, please see the text at the end of this email. You can add comments to this bug at: http://bugzilla.gnome.org/show_bug.cgi?id=496445 nautilus | general | Ver: 2.18.x Andre Klapper changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||DUPLICATE --- Comment #1 from Andre Klapper 2007-11-13 22:07 UTC --- This issue has been fixed already. Please ask Debian for updates at http://bugs.debian.org . *** This bug has been marked as a duplicate of 440988 *** Saludos... Igualmente, .-. Walter / \ _ / \ __ (\/ / \ |_/oo)http://www.swcomputacion.com/ \--~ Usuario Linux 425808 // || || \\http://counter.li.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
¿te gustaría colaborar en las traducciones de Debian?
Buenas, ¿os gustaría colaborar en la traducción de Debian al castellano? Hay un proyecto con una interfaz para traducir las descripciones de los paquetes, en el que cualquiera puede colaborar traduciendo. Es una forma sencilla de empezar. El grupo de traducción tiene sus glosarios, notas y demás en http://www.debian.org/intl/spanish/ y podéis daros de alta en su lista en http://www.debian.org/intl/Spanish#listas Si os interesa la traducciones de las descripciones, la página es http://kleptog.org/cgi-bin/ddtss2-cgi/es Si tenéis cualquier duda podéis preguntar en la lista o a mi directamente. un saludo.
Re: Consulta de Infraestructura
Concuerdo 100% con lo que dice Iñigo, y de pasadita te recomiendo que te documentes sobre el tema DMZ. Saludos El día 6/12/07, Iñigo Tejedor Arrondo [EMAIL PROTECTED] escribió: El jue, 06-12-2007 a las 00:44 -0300, ciracusa escribió: Hola Lista. 1) Situación: Modem/Router que brinda salida a internet y detrás una red de clase C donde estan los clientes y los servers. Por algunos servicios que brindan los servers y que son accedidos desde clientes remotos vía internet estoy obligado a realizar algunos portforwarding en el Modem/Router los cuales apuntan a cada server, según el caso. 2) Pregunta: Para aumentar la seguridad, es posible implementar algún server que este entre el modem router y los server para que los portforwarding vayan a este server de seguridad y desde ahi puedan pasar a los demás servidores? Muchas Gracias. Lo normal en ese caso es implementar una DMZ, para aumentar un poco la seguridad. Luego, para cada servicio, puedes implementar algo de filtrado/seguridad en un server intermedio, o en el propio server que da el servicio. Normalizar los paquetes, descartar los inválidos, limitar conexiones por IP (-m conlimit), filtrado de capa 7, monitorización de ataques, sistema de detección de intrusiones, etc Para mejorar la estabilidad ante DoS, puedes implementar balanceo de carga, p.ej. en apache, replicando los servers que tienes detrás de la máquina intermedia. De todas maneras, la seguridad es como una cuerda tensa, se romperá en su punto más débil. Y si se rompe en cualquier lugar, toda la cuerda se irá abajo. La seguridad es un proceso constante. Seleccionas un sistema operativo de calidad, lo conoces a fondo y no instalas nada desconfiable. Haces copias de seguridad. Las almacenarlos en un medio seguro, no en la red. Utilizas varias herramientas para comprobar todo (cortafuegos, rootkit, ARP, snort, etc etc hasta llegar a ser pedante). Es cuestión de acostumbrarse. Y si eres cuidadoso con las copias de seguridad y que éstas formen parte de tu vida diaria y tienes un plan de contingencia, cuando la seguridad se rompe, tienes soluciones. Saludos -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ¿te gustaría colaborar en las t raducciones de Debian?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Fernando Cerezal escribió: Buenas, ¿os gustaría colaborar en la traducción de Debian al castellano? Hay un proyecto con una interfaz para traducir las descripciones de los paquetes, en el que cualquiera puede colaborar traduciendo. Es una forma sencilla de empezar. El grupo de traducción tiene sus glosarios, notas y demás en http://www.debian.org/intl/spanish/ y podéis daros de alta en su lista en http://www.debian.org/intl/Spanish#listas Si os interesa la traducciones de las descripciones, la página es http://kleptog.org/cgi-bin/ddtss2-cgi/es Si tenéis cualquier duda podéis preguntar en la lista o a mi directamente. un saludo. conta conmigo. saludos -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHWvNzTvoVXzedLwARAsgeAJ4wkruAztNcPpDl9V1B9scYlgRp7wCgqI+g E5b2VNHsFXghH/EOMOaxU+c= =98tr -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ¿cómo listar paquetes mal instalados ? ¿y que se van a actualizar?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Luis Rodrigo Gallardo Cruz escribió: On Sat, Dec 08, 2007 at 05:32:51PM +0100, Jaime Arias wrote: ¿Hay por línea de comandos una forma de listar los ficheros que le faltan a un paquete instaldo? Instala el paquete debsums. Te da no solo la lista de ficheros faltantes sino también la de modificados (desafortunadamente, no sirve con unos cuantos paquetes, que no incluyen las sumas de verificación necesarias). Otra pregunta. Me gustaría listar los paquetes que se pueden actualizar una vez hecho aptitude update. Es decir, si ejecutas aptitude update y lanzas kpackge, puedes ir a la pestaña de actulizados y se muestran los que se pueden actualizar. ¿Por línea de comandos se puede hacer la misma lista de paqutes? aptitude upgrade aptitude safe-upgrade tambien. saludos - -- __ _ __ _ _ _ ___| |__ ___ / _` |/ _` | | | |/ __| '_ \ / _ \® | (_| | (_| | |_| | (__| | | | (_) | \__, |\__,_|\__,_|\___|_| |_|\___/ |___/ Key ID :0x4EFA 155F 379D 2F00 hkp://wwwkeys.eu.pgp.net Telefono:(raspar aqui) | - -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHWvXmTvoVXzedLwARApQAAJsGsIQq9ryjbE/xJgFgdKEmwn/9FACgpK+o nYU7LrKMaRgqJAyDY/jTUYs= =Tjhi -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Acceso a la OBP en Debian Sparc
Daniel Bareiro escribió: El viernes 07 de diciembre del 2007 a las 00:14:21, David escribió: Estoy usando Debian GNU/Linux en un equipo UltraSparc y me gustaría poder obtener un OBP usando un teclado estándar de PC. Probe haciendo un shutdown o init 0 pero el equipo se apaga completamente. Probá con HALT . Con Solaris al menos funciona. no creo que ñlo hallan modificado Gracias por responder, David. Envío la respuesta porque acá, ya que parece que solo me llegó a la cuenta personal y quizás a alguien más pueda serle de utilidad. Les cuento lo que estuve probando. Una forma de obtener un prompt de OpenBoot es conectarse por telnet a la máquina en la cual queremos acceder al OpenBoot. Luego, salir de telnet usando CTRL + ]. Esto, si bien sale del telnet, aún deja la sesión en segundo plano sobre la máquina. Lo cual se puede comprobar presionando return. Entonces, tecleamos send brk desde telnet. De esta manera, obtenemos un prompt de OpenBoot. Para volver al sistema operativo, usamos el comando go. Por otra parte, para hacer que el equipo se quede en el OpenBoot luego de haber bajado Debian GNU/Linux, probé editando el archivo /etc/default/halt cambiando poweroff por halt, lo cual me hace pensar que escribiendo halt, como me sugerías, también hubiese funcionado. Lo que estaría bueno también saber para tener todo el esquema completo de lugares de donde poder pasarse a la OpenBoot es cómo hacerlo cuando se inicia el equipo. Noté que una vez que arranca, después de hacer una comprobación de la memoria, se queda en el prompt de OpenBoot. Pero al darle un enter directamente arranca el sistema operativo. ¿Alguna idea? Saludos, Daniel auto-boot?=false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Servidor DNS en Lenny
El jue, 06-12-2007 a las 10:00 -0300, Federico Alberto Sayd escribió: Diego Antonio Lucena Pumar escribió: Hola lista: Tengo un problema y por eso acudo a vosotros, no puedo resolver los dominios de mi servidor de nombres en micomputadora de escritorio. Los demás ordenadores de mi red, también con Debian, pero está vez Etch si los resuelven. El problema es que cuando uso el network manager de Gnome siempre me genera un fichero resolv.conf nuevo con la ip de mi puerta de enlace. Bien mi servidor de nombres no está en mi puerta de enlace, está en otro ordenador y no consigo configurar a Lenny para que use ese servidor para resolver los nombres. Mi pregunta es; ¿En que estoy fallando?, ¿Qué es lo que estoy haciendo mal?. Por favor no se lleven las manos a la cabeza, no soy capaz, antes era modificar un fichero y todo funcionaba de maravilla, ahora no se que han añadido nuevo para que esto no sea así. Gracias por la ayuda. Tienes que tener en cuenta que en Lenny el archivo /etc/resolv.conf se genera dinámicamente, no debes manejarlo de forma estática, ya que muchos servicios acceden a él y utilizan el programa resolvconf para esto. Puedes mirar /usr/share/doc/resolvconf para ver la configuración del mismo. Saludos -- Federico Sayd Técnico Universitario en Redes y Telecomunicaciones CICUNC - Universidad Nacional de Cuyo http://federicosayd.wordpress.com Gracias por vuestro consejos. Al final conseguí modificar el fichero interfaces de network y resolv.conf manualmente. Y todo está funcionando de maravilla salvo el nm-applet que dice que no estoy en red. Me parece más metódico lo que estas comentando de la ayuda de resolv. Un saludo, Diego Antonio Lucena Pumar -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Gnome - Network-admin - Para usuarios normales del sistema
Hola [EMAIL PROTECTED]: Tengo un portatil que utilizan varias personas, lo llevan y lo traen de alli para aca y se conectan a inet via wifi desde distintos lugares. Tengo instalado Etch, con Gnome. Atraves del icono de Network-admin del escritorio se conectan a internet, pero tengo un problema con esto: Necesitan logearse con la contraseña de root. En su momento les facilite esta contraseña, en la confianza de que solo la utilizarian para este proposito. Pero despues de un tiempo trabajando con el portatil, algun despavilado ha querido llegar mas alla y me ha jodido medio sistema... Bueno, la idea que he puesto en marcha es: Crear un grupo (wifinet) atraves del cual solo los usuarios que pertenezcan a el puedan acceder a configurar la red atraves del citado programa (network-admin). 1. He localizado el programa /usr/bin/network-admin. 2. He creado un grupo nuevo wifinet. 3. He cambiado el grupo al que pertenece el programa network-admin (root) a wifinet. 4. Y he incluido en el grupo wifinet a los usuarios pertinentes. Pero a la hora de iniciar el programa desde el escritorio, este sigue pidiendo la contraseña de superusuario (root). Ahora mismo ando mas pedio que el barco del aroz!!! Alguna idea para que network-admin funcione con las contraseñas de los usuarios normales del sistema?? Gracias a [EMAIL PROTECTED] de antemano y disculpar por la parrafa. Salud!!! jac. __ LLama Gratis a cualquier PC del Mundo. Llamadas a fijos y móviles desde 1 céntimo por minuto. http://es.voice.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Gnome - Network-admin - Para usuarios normales del sistema
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 jac escribió: Hola [EMAIL PROTECTED]: Tengo un portatil que utilizan varias personas, lo llevan y lo traen de alli para aca y se conectan a inet via wifi desde distintos lugares. Tengo instalado Etch, con Gnome. Atraves del icono de Network-admin del escritorio se conectan a internet, pero tengo un problema con esto: Necesitan logearse con la contraseña de root. En su momento les facilite esta contraseña, en la confianza de que solo la utilizarian para este proposito. Pero despues de un tiempo trabajando con el portatil, algun despavilado ha querido llegar mas alla y me ha jodido medio sistema... Bueno, la idea que he puesto en marcha es: Crear un grupo (wifinet) atraves del cual solo los usuarios que pertenezcan a el puedan acceder a configurar la red atraves del citado programa (network-admin). 1. He localizado el programa /usr/bin/network-admin. 2. He creado un grupo nuevo wifinet. 3. He cambiado el grupo al que pertenece el programa network-admin (root) a wifinet. 4. Y he incluido en el grupo wifinet a los usuarios pertinentes. Pero a la hora de iniciar el programa desde el escritorio, este sigue pidiendo la contraseña de superusuario (root). Ahora mismo ando mas pedio que el barco del aroz!!! Alguna idea para que network-admin funcione con las contraseñas de los usuarios normales del sistema?? Gracias a [EMAIL PROTECTED] de antemano y disculpar por la parrafa. Salud!!! jac. __ LLama Gratis a cualquier PC del Mundo. Llamadas a fijos y móviles desde 1 céntimo por minuto. http://es.voice.yahoo.com y por que no usar Knetworkmanager? sera tu solucion.Si bien es para Kde funciona perfectamente en gnome. - -- saludos __ _ __ _ _ _ ___| |__ ___ / _` |/ _` | | | |/ __| '_ \ / _ \® | (_| | (_| | |_| | (__| | | | (_) | \__, |\__,_|\__,_|\___|_| |_|\___/ |___/ Key ID :0x4EFA 155F 379D 2F00 hkp://wwwkeys.eu.pgp.net Telefono:(raspar aqui) | - -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHWxfoTvoVXzedLwARAt+4AKCKrmpyNUv+p3V3FuA3ZJfxEK5hvQCfWnjh QzUwa6/KXa7DXQMYLCmck1c= =E/Bw -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Gnome - Network-admin - Para usuarios normales del sistema
El sáb, 08-12-2007 a las 22:23 +0100, jac escribió: Hola [EMAIL PROTECTED]: Tengo un portatil que utilizan varias personas, lo llevan y lo traen de alli para aca y se conectan a inet via wifi desde distintos lugares. Tengo instalado Etch, con Gnome. Atraves del icono de Network-admin del escritorio se conectan a internet, pero tengo un problema con esto: Necesitan logearse con la contraseña de root. En su momento les facilite esta contraseña, en la confianza de que solo la utilizarian para este proposito. Pero despues de un tiempo trabajando con el portatil, algun despavilado ha querido llegar mas alla y me ha jodido medio sistema... Bueno, la idea que he puesto en marcha es: Crear un grupo (wifinet) atraves del cual solo los usuarios que pertenezcan a el puedan acceder a configurar la red atraves del citado programa (network-admin). 1. He localizado el programa /usr/bin/network-admin. 2. He creado un grupo nuevo wifinet. 3. He cambiado el grupo al que pertenece el programa network-admin (root) a wifinet. 4. Y he incluido en el grupo wifinet a los usuarios pertinentes. Pero a la hora de iniciar el programa desde el escritorio, este sigue pidiendo la contraseña de superusuario (root). Ahora mismo ando mas pedio que el barco del aroz!!! Alguna idea para que network-admin funcione con las contraseñas de los usuarios normales del sistema?? Gracias a [EMAIL PROTECTED] de antemano y disculpar por la parrafa. Salud!!! jac. Hola No me queda clara la necesidad del network-admin para conectarse. Si he entendido bien Tu problema, creo que lo que necesitas es agregar a los usuarios a quienes les quieras dar acceso, al grupo netdev y podrán conectarse desde el network-manager-gnome sin necesidad de la contraseña de root. Te aconsejo por seguridad que cambies Tu contraseña de root (mencionas que se las habías dado a los usuarios para que se conectaran). Saludos -- Fernando C. Estrada - http://www.fcestrada.com [EMAIL PROTECTED] - 1024D/45D559A2 2007-08-09 6BC0 293A 9C7A 9DD5 2D12 6DCB 6A99 02A1 45D5 59A2
Re: ¿te gustaría colaborar en las traducci ones de Debian?
--- [EMAIL PROTECTED] [EMAIL PROTECTED] escribió: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Fernando Cerezal escribió: Buenas, ¿os gustaría colaborar en la traducción de Debian al castellano? Hay un proyecto con una interfaz para traducir las descripciones de los paquetes, en el que cualquiera puede colaborar traduciendo. Es una forma sencilla de empezar. El grupo de traducción tiene sus glosarios, notas y demás en http://www.debian.org/intl/spanish/ y podéis daros de alta en su lista en http://www.debian.org/intl/Spanish#listas Si os interesa la traducciones de las descripciones, la página es http://kleptog.org/cgi-bin/ddtss2-cgi/es Si tenéis cualquier duda podéis preguntar en la lista o a mi directamente. un saludo. conta conmigo. También conmigo saludos saludos.. E.E.F.J. [EMAIL PROTECTED] ¡Capacidad ilimitada de almacenamiento en tu correo! No te preocupes más por el espacio de tu cuenta con Correo Yahoo!: http://correo.espanol.yahoo.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ¿te gustaría colaborar en las traducciones de Debian?
Buenas, Perdon el medio offtopic.Existe algun proyecto de estas caracteristicas para traducir debian pero al euskara?Si lo hay estaria interesado. Gracias. Un saludo. aitiba
Nätverkshastighet
Hej Bredbandskollen.se är en bra sida för att kolla vilken hastighet man har mot internet, men jag skulle vilja kolla hastigheten i mitt lokala nätverk. Jag antar att jag kan göra det med t.ex ping eller tcpdump, treaceroute eller något liknande, problemet är bara att jag inte riktigt vet hur jag ska tolka resultatet. Är det någon som har ett bra förslag med tips om hur jag tolkar outputen? Tackar
Behöver tips hur man får ner pake t från unstable på bästa sätt.
Hej Jag vill försöka installera ushare 1.1 på min debian4. Dock så behöver den ett gäng med lib's som ligger i unstable libdlna0: Depends: libavcodec1d (= 0.cvs20070307) but it is not installable Depends: libavformat1d (= 0.cvs20070307) but it is not installable Depends: libc6 (= 2.6-1) but 2.3.6.ds1-13etch2 is to be installed ushare: Depends: libavcodec1d (= 0.cvs20070307) but it is not installable Depends: libavformat1d (= 0.cvs20070307) but it is not installable Depends: libavutil1d (= 0.cvs20070307) but it is not installable Depends: libc6 (= 2.6-1) but 2.3.6.ds1-13etch2 is to be installed Depends: libogg0 (= 1.1.3) but it is not going to be installed Depends: libraw1394-8 but it is not going to be installed Depends: libtheora0 but it is not going to be installed Depends: libupnp2 but it is not installable Depends: libvorbisenc2 (= 1.1.2) but it is not going to be installed Jag har alldrig använt mig av unstable förut så jag undrar hur jag går tillväga på bästa sätt och. Går att enbart att plocka ner dessa grejer eller måste man uppdatera hela sin debian installation så den får med allt från unstable ? Tacksam för råd Mvh Mikael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Behöver tips hur man f år ner paket från unstable på bästa sätt .
* Mikael Rudberg [EMAIL PROTECTED] [2007-12-08 14:45:11 +0100]: Hej Jag vill försöka installera ushare 1.1 på min debian4. Dock så behöver den ett gäng med lib's som ligger i unstable ... Jag har alldrig använt mig av unstable förut så jag undrar hur jag går tillväga på bästa sätt och. Går att enbart att plocka ner dessa grejer eller måste man uppdatera hela sin debian installation så den får med allt från unstable ? L�gg till unstable som repository i din sources.list och k�r följande: # apt-get -t unstable paketnamn Jag har inte beh�vt g�ra detta sj�lv n�gon g�ng, dåjag k�rt unstable sedan min f�rsta installation, sån�gon annan kanske kan fylla i hur v�l det fungerar att blanda distributioner pådet h�r s�ttet? -- |_|O|_| |_|_|O| Kim Christensen |O|O|O| http://rac.nu/kchr.asc -- () ascii ribbon campain - against html e-mail /\ www.asciiribbon.org - against proprietary attachments -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Streaming filmer mm
consiglieri skrev: Sitter och funderar på hur man skall göra för att använda en maskin i nätverket hemma där filmer finns sparade och som kan spelas upp på andra enheter i nätverket. Det är väl det som menas med att man streamar film? Är öht lite förvirrad när det gäller home theater pc osv. vad jag skulle vilja är att filmer låg lagrade på en hårddisk i nätverket och att andra maskiner kan spela upp dessa filmer via nätverket men inte nödvändigtvis ladda ner filerna. Är detta öht möjligt eller är jag bara totalt okunnig. En ide jag har är att man t.ex lagrar kabel-tv program på en hårddisk och att dessa program sen kan kommas åt via nätverket. MythTV klarar allt detta galant, man har en backendmaskin med ett eller flera TV-kort och mycket hårddisk. Sedan kan man ha hårddisklösa frontendmaskiner i olika rum som är kopplade till var sin TV, dessa kan spela upp allt som finns på backendmaskinen. Jag har använt MythTV sedan 2003 och är mycket nöjd. Det är lite meckigt att få igång den första gången, men sen rullar det på utan problem... http://www.mythtv.org -- | Janek Hellqvist | | [EMAIL PROTECTED] | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Streaming filmer mm
Jag kör en en debian server där jag har min musik o film. Sen har jag moddade (chippade) xboxar som kör XBMC (http://www.xboxmediacenter.com/) alternativt kan du köra med en omoddad XBox360 och använda uShare som en media server. Dessa lösningar är också rätt lätta att sätta upp. Dock får man ingen PVR funktionalitet som man kan få med myth. Janek Hellqvist wrote: consiglieri skrev: Sitter och funderar på hur man skall göra för att använda en maskin i nätverket hemma där filmer finns sparade och som kan spelas upp på andra enheter i nätverket. Det är väl det som menas med att man streamar film? Är öht lite förvirrad när det gäller home theater pc osv. vad jag skulle vilja är att filmer låg lagrade på en hårddisk i nätverket och att andra maskiner kan spela upp dessa filmer via nätverket men inte nödvändigtvis ladda ner filerna. Är detta öht möjligt eller är jag bara totalt okunnig. En ide jag har är att man t.ex lagrar kabel-tv program på en hårddisk och att dessa program sen kan kommas åt via nätverket. MythTV klarar allt detta galant, man har en backendmaskin med ett eller flera TV-kort och mycket hårddisk. Sedan kan man ha hårddisklösa frontendmaskiner i olika rum som är kopplade till var sin TV, dessa kan spela upp allt som finns på backendmaskinen. Jag har använt MythTV sedan 2003 och är mycket nöjd. Det är lite meckigt att få igång den första gången, men sen rullar det på utan problem... http://www.mythtv.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Behöver tips hur man får ner paket från unstable på bästa sätt.
On Sat, Dec 08, 2007 at 03:30:14PM +0100, Kim Christensen wrote: * Mikael Rudberg [EMAIL PROTECTED] [2007-12-08 14:45:11 +0100]: Hej Jag vill försöka installera ushare 1.1 på min debian4. Dock så behöver den ett gäng med lib's som ligger i unstable ... Jag har alldrig använt mig av unstable förut så jag undrar hur jag går tillväga på bästa sätt och. Går att enbart att plocka ner dessa grejer eller måste man uppdatera hela sin debian installation så den får med allt från unstable ? L???gg till unstable som repository i din sources.list och k???r följande: # apt-get -t unstable paketnamn Jag har inte beh???vt g???ra detta sj???lv n???gon g???ng, dåjag k???rt unstable sedan min f???rsta installation, sån???gon annan kanske kan fylla i hur v???l det fungerar att blanda distributioner pådet h???r s???ttet? Det finns två alternativ, antingen gör man som Kim skriver ovan, låt oss kalla det blanda binärer eller så kompilerar man ushare 1.1 för stable (etch), låt oss kalla det bakåtporta. För att bakåtporta krävs: 1. Lägg till en deb-src rad i /etc/apt/sources.list som refererar till unstable 2. # apt-get update 2. # apt-get build-dep ushare 3. # apt-get --build source ushare Fördelar med blanda binärer: - något enklare, kräver bara en ändring i /etc/apt/sources.list och att kör: # apt-get update; apt -t unstable install ushare - kräver mindre CPU-tid. Fördelar med bakåtporta: - Enbart det paket som bakåtportas påverkas, de övriga paketen är fortfarande samma väl beprövade kombination av program. (T.ex. så såg jag i listan över bibliotek som skulle uppdateras ingick libc, vilket ju nästan alla dina övriga program använder.) Inget av alternativen är överlägset, vilket som är bäst beror på situationen, t.ex. bakåtportar man inte gärna ett gigantisk program som openoffice (riktigt stora brukar i och för sig finnas på nätet bakåtportade av någon annan), eller om burken som ska köra programmet är långsam, eller har mycket lite ledigt hårddiskuttrymme. Som Kim skriver är den stora frågan hur bra en oprövad kombination av binärer fungerar. Jag har såvitt jag minns aldrig stött på problem som jag kunnat härleda till en sådan kombination, men om stabilitet är viktigt för dig (eller viktigt för dig på en viss dator), så skulle jag rekommendera bakåtporta. Om du kan anta att du i framtiden kommer att vilja ha fler nyare versioner av program än de som finns i stable, blir det i längden lite omständligt att bakåtporta. I sådana fall är smidigare att köra testing än stable. Själv kör jag stable med bakåtportade versioner av några få för mig viktiga program (ion3, xlockmore). -- Hans Ekbrand signature.asc Description: Digital signature
Re: Behöver tips hur man får ner paket från unstable på bästa sätt.
On Sat, Dec 08, 2007 at 03:30:14PM +0100, Kim Christensen wrote: * Mikael Rudberg [EMAIL PROTECTED] [2007-12-08 14:45:11 +0100]: Hej Jag vill försöka installera ushare 1.1 på min debian4. Dock så behöver den ett gäng med lib's som ligger i unstable ... Jag har alldrig använt mig av unstable förut så jag undrar hur jag går tillväga på bästa sätt och. Går att enbart att plocka ner dessa grejer eller måste man uppdatera hela sin debian installation så den får med allt från unstable ? L???gg till unstable som repository i din sources.list och k???r följande: # apt-get -t unstable paketnamn Jag har inte beh???vt g???ra detta sj???lv n???gon g???ng, dåjag k???rt unstable sedan min f???rsta installation, sån???gon annan kanske kan fylla i hur v???l det fungerar att blanda distributioner pådet h???r s???ttet? Det finns två alternativ, antingen gör man som Kim skriver ovan, låt oss kalla det blanda binärer eller så kompilerar man ushare 1.1 för stable (etch), låt oss kalla det bakåtporta. För att bakåtporta krävs: 1. Lägg till en deb-src rad i /etc/apt/sources.list som refererar till unstable 2. # apt-get update 2. # apt-get build-dep ushare 3. # apt-get --build source ushare Fördelar med blanda binärer: - något enklare, kräver bara en ändring i /etc/apt/sources.list och att kör: # apt-get update; apt -t unstable install ushare - kräver mindre CPU-tid. Fördelar med bakåtporta: - Enbart det paket som bakåtportas påverkas, de övriga paketen är fortfarande samma väl beprövade kombination av program. (T.ex. så såg jag i listan över bibliotek som skulle uppdateras ingick libc, vilket ju nästan alla dina övriga program använder.) Inget av alternativen är överlägset, vilket som är bäst beror på situationen, t.ex. bakåtportar man inte gärna ett gigantisk program som openoffice (riktigt stora brukar i och för sig finnas på nätet bakåtportade av någon annan), eller om burken som ska köra programmet är långsam, eller har mycket lite ledigt hårddiskuttrymme. Som Kim skriver är den stora frågan hur bra en oprövad kombination av binärer fungerar. Jag har såvitt jag minns aldrig stött på problem som jag kunnat härleda till en sådan kombination, men om stabilitet är viktigt för dig (eller viktigt för dig på en viss dator), så skulle jag rekommendera bakåtporta. Om du kan anta att du i framtiden kommer att vilja ha fler nyare versioner av program än de som finns i stable, blir det i längden lite omständligt att bakåtporta. I sådana fall är smidigare att köra testing än stable. Själv kör jag stable med bakåtportade versioner av några få för mig viktiga program (ion3, xlockmore). -- Hans Ekbrand signature.asc Description: Digital signature
teste
desculpem, mas nao estou conseguindo enviar menssagens pra lista... -- linux user nº 432194 Eu sou livre e você?
Re: Autentincando link ADSL
Em 07/12/07, Leandro Moreira [EMAIL PROTECTED] escreveu: Caros, É possivel realizar a autenticação de 2 links ADSL no linux, o material que tenho encontrado, faz um link autenticar e o outro entra no servidor em modo router (modem roteado). Depende de como é feita a autenticação. Aqui no Rio, na época que o velox era autenticado via web, havia um script que fazia a autenticação. Vi um tutorial em que para a autenticação de dois links o script subia e autenticava o primeiro link, removia a rota default, subia o segundo link (a rota default vai pro segundo link) e autenticava o segundo. Depois fazia um tipo de balanceamento de link ou algo assim. Fabiano Pires. Att. -- Leandro Moreira Linux Networks e-mail: [EMAIL PROTECTED] Tel.: + 55(32) 9197-7909 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Abraços, Fabiano
Re: teste
valeu pela dica Em 08/12/07, Edmundo Valle Neto [EMAIL PROTECTED] escreveu: Márcio Pedroso escreveu: por favor, acusem recebimento Não seria mais fácil você simplesmente verificar nos servidores do debian se a sua mensagem foi recebida e arquivada? Se não foi arquivada ela não chegou à lista. http://lists.debian.org/debian-user-portuguese/2007/12/maillist.html Já tive alguns problemas com o antispam da lista. Atenciosamente. Edmundo Valle Neto -- linux user nº 432194 Eu sou livre e você?
Fwd: problemas como squid....urgente
-- Forwarded message -- From: Márcio Pedroso [EMAIL PROTECTED] Date: 08/12/2007 11:59 Subject: problemas como squid[urgente] To: debian-user-portuguese@lists.debian.org debian-user-portuguese@lists.debian.org estou usando o debian etch e o squid 2.6.STABLE5, o hardware é um AMD Sempron(tm) Processor 2500+ com 512 de memoria. tem como placa de rede secundaria (eth1) uma D-Link System Inc DGE-530T Gigabit. o que acontece é o seguinte. montei o roteador compilei o kernel pra instalar o layer7, como eu ja tinha feito anteriormente em outras maquinas, seguindo um tutorial. essa maquina ja tinha dado pau em uma memoria que tinha nela anteriormente. mas recentemente passei um memtest e nao acusou erro nessa outra memoria que esta instalada autalmente. o problema agora é que, quando coloco pra rotear la na minha regra de firewall, ele nao roteia a internet. eu nao sei onde estou errando ou se pode ser um pau de hardware.. bom vou postar o meu firewal e o meu squid.conf. e meu messages em anexo.. desculpem o meu pedido de urgencia.. -- linux user nº 432194 Eu sou livre e você? -- linux user nº 432194 Eu sou livre e você? email Description: Binary data
Re: teste
Márcio Pedroso escreveu: por favor, acusem recebimento Não seria mais fácil você simplesmente verificar nos servidores do debian se a sua mensagem foi recebida e arquivada? Se não foi arquivada ela não chegou à lista. http://lists.debian.org/debian-user-portuguese/2007/12/maillist.html Já tive alguns problemas com o antispam da lista. Atenciosamente. Edmundo Valle Neto -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: teste
* Konnichiwa Edmundo Valle Neto-sama: Márcio Pedroso escreveu: por favor, acusem recebimento Não seria mais fácil você simplesmente verificar nos servidores do debian se a sua mensagem foi recebida e arquivada? Se não foi arquivada ela não chegou à lista. http://lists.debian.org/debian-user-portuguese/2007/12/maillist.html Já tive alguns problemas com o antispam da lista. Não se trata de anti-spam e sim do Gmail. Todos os e-mails enviados não chegam à caixa de quem enviou. E sim, seria melhor que o Márcio tivesse visto na lista, pois essa questão já foi levantada várias vezes. XD []'s, Still -- Nelson Luiz Campos Engenheiro Eletricista Linux User #89621 UIN 11464303 gnupgID: 55577339 Skype Still_by_Still signature.asc Description: Digital signature
Re: teste
por favor, acusem recebimento 2007/12/8, Márcio Pedroso [EMAIL PROTECTED]: desculpem, mas nao estou conseguindo enviar menssagens pra lista... -- linux user nº 432194 Eu sou livre e você? -- linux user nº 432194 Eu sou livre e você?
Apagar os Profiles ao LogIn no Samba como PDC
Seguinte Pessoal, Estou com o seguinte problema, um laboratório com 20 máquinas, rodando Xp, tendo como o samba como Gerenciador de Domínio, Samba como PDC e o que quero fazer e não consigo é o seguinte. Sempre que for feito login, o Profile é apagado, ou seja quando o usuário loga ele pode fazer tudo, gravar arquivos na área de trabalho, meus documentos, mas tudo isso tem de ser apagado quando for feito um novo login, e voltar ao profile default, com a área de trabalho sem os arquivos que o usuário colocou etc a solução tentada é rodar um netlogon o rd ..mas há alguns problemas de arquivos já sendo utilizados, a outra opção era apagar quando o usuário fizesse logout, mas se ele não efetuar logoff normalmente, não terá efeito(pico de luz, ou reset por exemplo). Consegui um script em vbs que apaga os profiles, porém ele está apagando localmente na máquina, e quando o usuário desloga, e reloga, o home na local realmente é apagado, mas ele puxa tudo do profile do servidor samba, . .. alguma dica? []´s Rafael Freitas
Res: Apagar os Profiles ao LogIn no Samba como PDC
uma solução é, na pasta dele no servidor nao dar permissao de escrita pro usuario. soh uma dica, onde trabalho o problema eh o inverso, keremos que o usuario grave as informaçoes na area de trabalho e meus documentos, e eles sempre gravam na raiz, ou em outra pasta, no seu caso, se sua raiz tiver permissao, o usuario salva td lah.. *= .''`. Yours Trully : :' : Carlos Beltrame `. `'` Eletrical Engineer `- IEEE #80472763 Student Branch UNESP Ilha SOlteira Vice-Chair Linux User #442225 UNESP - Câmpus de Ilha Solteira http://www.ieee.org/unesp-ilha http://www.ldc.feis.unesp.br *= - Mensagem original De: Rafael Freitas [EMAIL PROTECTED] Para: Debian debian-user-portuguese@lists.debian.org Enviadas: Sábado, 8 de Dezembro de 2007 18:17:36 Assunto: Apagar os Profiles ao LogIn no Samba como PDC Seguinte Pessoal, Estou com o seguinte problema, um laboratório com 20 máquinas, rodando Xp, tendo como o samba como Gerenciador de Domínio, Samba como PDC e o que quero fazer e não consigo é o seguinte. Sempre que for feito login, o Profile é apagado, ou seja quando o usuário loga ele pode fazer tudo, gravar arquivos na área de trabalho, meus documentos, mas tudo isso tem de ser apagado quando for feito um novo login, e voltar ao profile default, com a área de trabalho sem os arquivos que o usuário colocou etc a solução tentada é rodar um netlogon o rd ..mas há alguns problemas de arquivos já sendo utilizados, a outra opção era apagar quando o usuário fizesse logout, mas se ele não efetuar logoff normalmente, não terá efeito(pico de luz, ou reset por exemplo). Consegui um script em vbs que apaga os profiles, porém ele está apagando localmente na máquina, e quando o usuário desloga, e reloga, o home na local realmente é apagado, mas ele puxa tudo do profile do servidor samba, . .. alguma dica? []´s Rafael Freitas Abra sua conta no Yahoo! Mail, o único sem limite de espaço para armazenamento! http://br.mail.yahoo.com/
Re: problemas como squid....urgente
Boa Noite Márcio, Tem como você postar as regras so seu firewall aqui? Assim ficaria mais fácil ajudá-lo... Eu seu q isso é uma coisa meio básica, mas... você está mascarando a sua conexão de saída? Porque você está usando Layer 7 + Squid? Seu proxy eh transparente? Pra poder ajudá-lo precisamos de mais detalhes... Att, Rodrigo 2007/12/8, Márcio Pedroso [EMAIL PROTECTED]: -- Forwarded message -- From: Márcio Pedroso [EMAIL PROTECTED] Date: 08/12/2007 11:59 Subject: problemas como squid[urgente] To: debian-user-portuguese@lists.debian.org debian-user-portuguese@lists.debian.org estou usando o debian etch e o squid 2.6.STABLE5, o hardware é um AMD Sempron(tm) Processor 2500+ com 512 de memoria. tem como placa de rede secundaria (eth1) uma D-Link System Inc DGE-530T Gigabit. o que acontece é o seguinte. montei o roteador compilei o kernel pra instalar o layer7, como eu ja tinha feito anteriormente em outras maquinas, seguindo um tutorial. essa maquina ja tinha dado pau em uma memoria que tinha nela anteriormente. mas recentemente passei um memtest e nao acusou erro nessa outra memoria que esta instalada autalmente. o problema agora é que, quando coloco pra rotear la na minha regra de firewall, ele nao roteia a internet. eu nao sei onde estou errando ou se pode ser um pau de hardware.. bom vou postar o meu firewal e o meu squid.conf. e meu messages em anexo.. desculpem o meu pedido de urgencia.. -- linux user nº 432194 Eu sou livre e você? -- linux user nº 432194 Eu sou livre e você? -- Grato! Rodrigo C. Carvalho = SO: Debian Sarge 3.1 Iptables 1.3.1SQUID 2.5 =
SD Card ENE note Lenovo
Pessoal alguem já conseguiu fazer funcionar o leitor de SD Card ENE, eu procurei e até agora não consegui fazer funcionar o meu, nesse mesmo note tenho o ubuntu 7.10 instalado e nele funciona, já até instalei o lenny para ver se funcionava com um Debian mais novo mas nada, já executei os seguintes procedimentos: modprobe mmc_block modprobe mmc_core modprobe sdhci e nada disso resolveu, se alguem tiver uma dica será bem vinda. -- In a World without Walls and Fences, who needs Windows and Gates? - Think different. -Think Linux. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: RAID + HD USB + Hotswap
Olá Retano, Em 06/12/07, Renato S. Yamane [EMAIL PROTECTED] escreveu: Rodrigo Carvalho escreveu: Não sei se alguém aki já fez RAID com HD USB... A velocidade de uma interface USB é muito inferior a velocidade de um HD Scsi, SATA, etc. Será que isso não irá comprometer o seu RAID? Sim... eu sei, mas... fiz vários testes, mesmo sabendo que isso não é aconselhável posso garantir que no meu caso está funcionando adequadamente... Pelo menos, está funcionando há uns 6 meses sem problemas. Estou utilizando dois HDs IDEs sendo que um deles está em uma gaveta USB Quando coloco o dispositivo na USB, o linux detecta, e adiciona-o no array correto, porém... meu problema é quando desligo o HD. Eu não queri ter que removê-lo na mão antes de desligá-lo Qualquer dispositivo de armazenamento USB *deve* ser desmontado antes de ser desconectado. Seja usando o umount ou clicando com o botão direito sobre a interface e escolhendo Remover de modo seguro. Não estou tendo que desmontá-lo, porque na verdade, ele não é montando... o dev de raid que fica montado... O problema é que quando eu desligo o servidor com ele no array do meu RAID, o dispositivo /dev/sdX continua no array só que com a flag Fail , ou seja... seria como se ele tivesse dado problema. Dae tenho q utilizar o comando mdadm -r /dev/sdX... e era isso que eu queria evitar... isso pois se não faço, quando vou colocar outro, ao invés de detectar como sda, o pc passa a detectá-lo como sdb pois teóricamente o sda ainda continua no array. Qual é o seu RAID? 0, 1, 10? A princípio, eu *acho* que você está usando RAID 1 com o objetivo de sincronizar o seu HD USB (que você leva consigo). Exatamente, é nível 1 sim... é que tem uma empresa de segurança que leva e trás os HDs todos os dias... O por incrível q pareça, fazer um buil do raid via USB está sendo MUITO mais rápido do que utilizar o RSYNC ou um simples COPY. Se você realmente estiver usando RAID1 com esse objetivo (fazer backup com um HD removível) eu creio que seria melhor usar rsync do que RAID. São coisas totalmente diferentes mas eu *acho* que você está usando RAID com o objetivo de fazer um sincronismo entre esses 2 dispositivos. Ehh... como eu falei acima... Utilizando o RSYNC incremental eu levo aprox. 3 hrs apenas para ele estabelecer o q vai ser copiado... se eu fizer um rsync comum, ele leva aprox. 3,5hrs pra copiar tudo... enquanto com o raid eu levo 1.2 horas pra sincronizar os HDs. Att, Renato Sei que é meio estran Mas, agradeço a ajuda Renato. Abraços! -- Grato! Rodrigo C. Carvalho = SO: Debian Sarge 3.1 Iptables 1.3.1SQUID 2.5 =
Re: problemas como squid....urgente
opa desculpa a demora pra responder.. tava quebrando a cabeça em cima do roteador.. ja e quase uma da manha e resolvi começar do zero. ou seja, formatei a maquina. mas, respondendo as perguntas.. eu anexei o meu firewall, junto com o squid.comf e o e o messenges... o proxy é trasparente brigadao por responder Em 08/12/07, Rodrigo Carvalho [EMAIL PROTECTED] escreveu: Boa Noite Márcio, Tem como você postar as regras so seu firewall aqui? Assim ficaria mais fácil ajudá-lo... Eu seu q isso é uma coisa meio básica, mas... você está mascarando a sua conexão de saída? Porque você está usando Layer 7 + Squid? Seu proxy eh transparente? Pra poder ajudá-lo precisamos de mais detalhes... Att, Rodrigo 2007/12/8, Márcio Pedroso [EMAIL PROTECTED]: -- Forwarded message -- From: Márcio Pedroso [EMAIL PROTECTED] Date: 08/12/2007 11:59 Subject: problemas como squid[urgente] To: debian-user-portuguese@lists.debian.org debian-user-portuguese@lists.debian.org estou usando o debian etch e o squid 2.6.STABLE5, o hardware é um AMD Sempron(tm) Processor 2500+ com 512 de memoria. tem como placa de rede secundaria (eth1) uma D-Link System Inc DGE-530T Gigabit. o que acontece é o seguinte. montei o roteador compilei o kernel pra instalar o layer7, como eu ja tinha feito anteriormente em outras maquinas, seguindo um tutorial. essa maquina ja tinha dado pau em uma memoria que tinha nela anteriormente. mas recentemente passei um memtest e nao acusou erro nessa outra memoria que esta instalada autalmente. o problema agora é que, quando coloco pra rotear la na minha regra de firewall, ele nao roteia a internet. eu nao sei onde estou errando ou se pode ser um pau de hardware.. bom vou postar o meu firewal e o meu squid.conf. e meu messages em anexo.. desculpem o meu pedido de urgencia.. -- linux user nº 432194 Eu sou livre e você? -- linux user nº 432194 Eu sou livre e você? -- Grato! Rodrigo C. Carvalho = SO: Debian Sarge 3.1 Iptables 1.3.1SQUID 2.5 = -- linux user nº 432194 Eu sou livre e você?
Re: Fwd: problemas como squid....urgente
Márcio Pedroso escreveu: (...) estou usando o debian etch e o squid 2.6.STABLE5, o hardware é um AMD Sempron(tm) Processor 2500+ com 512 de memoria. tem como placa de rede secundaria (eth1) uma D-Link System Inc DGE-530T Gigabit. o que acontece é o seguinte. montei o roteador compilei o kernel pra instalar o layer7, como eu ja tinha feito anteriormente em outras maquinas, seguindo um tutorial. essa maquina ja tinha dado pau em uma memoria que tinha nela anteriormente. mas recentemente passei um memtest e nao acusou erro nessa outra memoria que esta instalada autalmente. o problema agora é que, quando coloco pra rotear la na minha regra de firewall, ele nao roteia a internet. eu nao sei onde estou errando ou se pode ser um pau de hardware.. bom vou postar o meu firewal e o meu squid.conf. e meu messages em anexo.. desculpem o meu pedido de urgencia.. Não entendi o que não está funcionando, o squid não faz roteamento de pacotes e também não utiliza roteamento. Colando o conteúdo do arquivo email.bin que veio em anexo, agora vai ficar difícil de saber o que é resposta minha ..., vou colocar *** no início. (...) *** OK, vamos supor que o script abaixo tenha permissões para ser executado. /etc/init.d/compartilhamento #!/bin/bash echo '1' /proc/sys/net/ipv4/ip_forward iptables=/usr/local/sbin/iptables *** Ops, tem certeza que o iptables fica lá? Não fica em /sbin/iptables? chefe=10.1.1.11 #limpando as regras de iptables iptables -F iptables -t nat -F iptables -t mangle -F #firewall # Contra Syn-flood iptables -A FORWARD -p tcp -m limit --limit 1/s -j ACCEPT *** O kernel tem um opção para isso se você preferir: *** echo Habilitando protecao TCP SYN com Cookies (para SYN floods) *** echo 1 /proc/sys/net/ipv4/tcp_syncookies *** Também não entendi porque você colocou isso na cadeia forward. # Contra Ping da Morte iptables -A FORWARD -p icmp --icmp-type echo-request -m limit --limit 1/s -j ACCEPT *** Ping da Morte era um ataque antigo que utilizava pacotes bem grandes com o ping, o Linux não sofre desse problema :), Isso acima é proteção contra ping flood. *** Também não entendi porque você colocou isso na cadeia forward. # Contra nmap #iptables -A FORWARD -p tcp --tcp-flags SYN,ACK,FIN,RST RST -m limit --limit 1/s -j ACCEPT #liberar para um ip #Liberar Ip do chefe: #$iptables -A FORWARD -s $chefe -m layer 7 --l7proto msnmessenger -j ACCEPT #iptables -A FORWARD -d ip-do-chefe -m layer 7 --l7proto bittorrent -j ACCEPT #bloquear msn messenger $iptables -A FORWARD -m layer7 --l7proto msnmessenger -j DROP iptables -I FORWARD -s 10.1.1.0/24 -p tcp --dport 1863 -j REJECT iptables -A FORWARD -s 192.168.1.0/24 -p tcp --dport 5190 -j REJECT $iptables -A FORWARD -m layer7 --l7proto edonkey -j DROP $iptables -A FORWARD -m layer7 --l7proto bittorrent -j DROP iptables -A FORWARD -p TCP --dport 1214 -j REJECT iptables -A FORWARD -p TCP --dport 6346 -j REJECT $iptables -I INPUT -m layer7 --l7proto fasttrack -j DROP iptables -I FORWARD -s 192.168.1.0/24 -p tcp --dport 4661:4672 -j REJECT *** Regras com iptables e $iptables provavelmente serão diferentes, metade vai chamar o iptables e metade chamar um comando que não existe, definido anteriormente com um caminho errado? #squid #redirecionamento de fluxo para a porta 3128 #iptables -t nat -A POSTROUTING -j MASQUERADE #iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j REDIRECT --to-port 3128 *** Isso faria um proxy transparente. Porém a linha está comentada. #mascarando conexoes de rede iptables -t nat -A POSTROUTING -j MASQUERADE *** Mesmo sem definir a interface de entrada/saída testando aqui isso funciona. Só com isso provavelmente você tem o NAT feito. *** Outras considerações: O firewall não define uma política padrão, que provavelmente então será ACCEPT, portanto qualquer outra regra com ACCEPT será inútil, regras com DROP ou REJECT até fariam sentido. /etc/squid/squid.conf #Porta do Proxy http_port 192.168.1.1:3128 transparent #always_direct allow all visible_hostname Controle_Unimar access_log /var/log/squid/access.log cache_log /var/log/squid/cache.log cache_log /var/log/squid/store.log cache_swap_log /var/log/squid/swap.log hierarchy_stoplist cgi-bin ? #Memória RAM usada pelo squid #cache_mem 128 MB #cache_dir ufs /var/cache/squid 300 16 256 #Gerenciamento do cache rotate cache_swap_low 90 cache_swap_high 95 refresh_pattern ^ftp: 15 20% 2280 refresh_pattern ^gopher: 15 0% 2280 refresh_pattern . 15 20% 2280 #dns_nameserver 201.10.1.2 201.10.120.3 #Mensagens de erro do Squid em Português error_directory /usr/share/squid/errors/Portuguese #Arquivo máximo gravado no Cache maximum_object_size 512 KB #Diretório do cache cache_dir ufs /var/spool/squid 4096 16 256 #Diretório de logs cache_access_log /var/log/squid/access.log #Comportamento do log cache_log /var/log/squid/cache.log #IP's da rede local bloqueados #acl ip_negado src /etc/squid/ip_negado #http_access deny ip_negado #Bloqueio
Re: test amacli gonderiyorum 5...:(...yanitlamayin arkadaslar...
Hem son asamaya geldigim olayi berbat ettin... 08.12.2007 tarihinde Recai Oktaş [EMAIL PROTECTED] yazmış: * Tolun ARDAHANLI [2007-12-08 12:28:48+0200] Arkadaslar testini yapacak oldugum maildir... O yuzden dikkate almayin... Kusuruma bakmayin Mailin gidip gitmedigine dair bir ileti almaya calisiyorumda ;)... Herkese sabrindan ve anlayisindan dolayi tesekkur ediyorum... Özelden sorduğum soruya zahmet buyurup cevap yazmadınız. Böyle durumlarda sabır ve anlayış 1 bilemedin 2 ileti için gösterilir. Liste trafiği durma noktası gelmiş olsa bile, burası test yapacağınız bir çöplük alanı değil. Lütfen bu saçmalığı kesin artık! -- roktas -- Tolun ARDAHANLI Bilgisayar Muhendisi E-posta:[EMAIL PROTECTED] Icq:326600 Tolun ARDAHANLI Computer Engineer E-mail:[EMAIL PROTECTED] Icq:326600
Re: test amacli gonderiyorum 5...:(...yanitlamayin arkadaslar...
Arkadasim bak sacmalik olarak nitelendiripte adamin asabini bozma burda denemezsek nerde deneyegiz zeki arkadasim... rakkas:-( 08.12.2007 tarihinde Recai Oktaş [EMAIL PROTECTED] yazmış: * Tolun ARDAHANLI [2007-12-08 12:28:48+0200] Arkadaslar testini yapacak oldugum maildir... O yuzden dikkate almayin... Kusuruma bakmayin Mailin gidip gitmedigine dair bir ileti almaya calisiyorumda ;)... Herkese sabrindan ve anlayisindan dolayi tesekkur ediyorum... Özelden sorduğum soruya zahmet buyurup cevap yazmadınız. Böyle durumlarda sabır ve anlayış 1 bilemedin 2 ileti için gösterilir. Liste trafiği durma noktası gelmiş olsa bile, burası test yapacağınız bir çöplük alanı değil. Lütfen bu saçmalığı kesin artık! -- roktas -- Tolun ARDAHANLI Bilgisayar Muhendisi E-posta:[EMAIL PROTECTED] Icq:326600 Tolun ARDAHANLI Computer Engineer E-mail:[EMAIL PROTECTED] Icq:326600
test amacli gonderiyorum 5...:(...yanitlamayin arkadaslar...
Arkadaslar testini yapacak oldugum maildir... O yuzden dikkate almayin... Kusuruma bakmayin Mailin gidip gitmedigine dair bir ileti almaya calisiyorumda ;)... Herkese sabrindan ve anlayisindan dolayi tesekkur ediyorum... -- Tolun ARDAHANLI Bilgisayar Muhendisi E-posta:[EMAIL PROTECTED] Icq:326600 Tolun ARDAHANLI Computer Engineer E-mail:[EMAIL PROTECTED] Icq:326600
Re: test amacli gonderiyorum 5...:(...yanitlamayin arkadaslar...
Walla olaya direk ...sacmalamayi kes diyerek baslayan sensin sayin roktas... ayrica ailemin verdigi terbiye senin gibi, insalara merhaba demeden direk ...sacmalamayi kes diyerek baslamak degil... kulaginda kupe olsun... tanimadigin insanlara direk ...sacmalamayi kes dersen benim verdigimden daha farkli tepkilerle karsilasir... /dev/null da senin gidecegin yer olsa gerek :-P cunku kucukken ogretmemisler olsa gerek ki hem kabahatli hemde guclu olmaya calisan sensin... listedeki arkadaslara da burdan da bunu animsatmak isterim... vede eninde sonunda bu mail i listeyede ulastiracagim... if (Adam not in [Recai Oktaş [EMAIL PROTECTED], Terbiyesiz, Allah'in Islah Etmedegi, Ultra Zeki, ... ] ) { printf(herkese kolay gelsin... ve Allah sabirlar versin hepimize\n); } 08.12.2007 tarihinde Recai Oktaş [EMAIL PROTECTED] yazmış: * Tolun ARDAHANLI [2007-12-08 12:48:01+0200] Arkadasim bak sacmalik olarak nitelendiripte adamin asabini bozma burda denemezsek nerde deneyegiz zeki arkadasim... rakkas:-( Çocuk... Terbiyeyi ailen mi vermedi, sen mi almadın orasını bilemiyorum. Allah seni islâh etsin! PS: Listedeki LKD üyesi arkadaşlara... Ben bu çocuğun yazdıklarını /dev/null'a koyuyorum, o sıkıntı olmaz. Fakat kill filedaki adresin @linux.org.tr olması bir sıkıntı tabii. Hatırlatmış olayım... -- roktas -- Tolun ARDAHANLI Bilgisayar Muhendisi E-posta:[EMAIL PROTECTED] Icq:326600 Tolun ARDAHANLI Computer Engineer E-mail:[EMAIL PROTECTED] Icq:326600
rakkas geldi meydane...
Walla olaya direk ...sacmalamayi kes diyerek baslayan sensin sayin roktas... ayrica ailemin verdigi terbiye senin gibi, insalara merhaba demeden direk ...sacmalamayi kes diyerek baslamak degil... kulaginda kupe olsun... tanimadigin insanlara direk ...sacmalamayi kes dersen benim verdigimden daha farkli tepkilerle karsilasir... /dev/null da senin gidecegin yer olsa gerek :-P cunku kucukken ogretmemisler olsa gerek ki hem kabahatli hemde guclu olmaya calisan sensin... listedeki arkadaslara da burdan da bunu animsatmak isterim... vede eninde sonunda bu mail i listeyede ulastiracagim... if (Adam not in [Recai Okta#351; [EMAIL PROTECTED] , Terbiyesiz, Allah'in Islah Etmedegi, Ultra Zeki, ... ] ) { printf(herkese kolay gelsin... ve Allah sabirlar versin hepimize\n); } 08.12.2007 tarihinde Recai Okta#351; [EMAIL PROTECTED] yazm#305;#351;:- T#305;rnak içindeki metni gizle - * Tolun ARDAHANLI [2007-12-08 12:48:01+0200] Arkadasim bak sacmalik olarak nitelendiripte adamin asabini bozma burda denemezsek nerde deneyegiz zeki arkadasim... rakkas:-( Çocuk... Terbiyeyi ailen mi vermedi, sen mi almad#305;n oras#305;n#305; bilemiyorum. Allah seni islâh etsin! PS: Listedeki LKD üyesi arkada#351;lara... Ben bu çocu#287;un yazd#305;klar#305;n#305; /dev/null'a koyuyorum, o s#305;k#305;nt#305; olmaz. Fakat kill filedaki adresin @ linux.org.tr olmas#305; bir s#305;k#305;nt#305; tabii. Hat#305;rlatm#305;#351; olay#305;m... -- roktas - Looking for last minute shopping deals? Find them fast with Yahoo! Search.
test amacli gonderiyorum 4...:/
Arkadaslar testini yapacak oldugum maildir... O yuzden dikkate almayin... Kusuruma bakmayin Mailin gidip gitmedigine dair bir ileti almaya calisiyorumda ;)... Herkese sabrindan ve anlayisindan dolayi tesekkur ediyorum... Tolun ARDAHNLI - Never miss a thing. Make Yahoo your homepage.
test amacli gonderiyorum 3...:)
Arkadaslar testini yapacak oldugum maildir... O yuzden dikkate almayin... Kusuruma bakmayin Mailin gidip gitmedigine dair bir ileti almaya calisiyorumda ;)... Herkese sabrindan ve anlayisindan dolayi tesekkur ediyorum... -- Tolun ARDAHANLI Bilgisayar Muhendisi E-posta:[EMAIL PROTECTED] Icq:326600 Tolun ARDAHANLI Computer Engineer E-mail:[EMAIL PROTECTED] Icq:326600
Re: test amacli gonderiyorum 5...:(...yanitlamayin arkadaslar...
* Tolun ARDAHANLI [2007-12-08 12:48:01+0200] Arkadasim bak sacmalik olarak nitelendiripte adamin asabini bozma burda denemezsek nerde deneyegiz zeki arkadasim... rakkas:-( Çocuk... Terbiyeyi ailen mi vermedi, sen mi almadın orasını bilemiyorum. Allah seni islâh etsin! PS: Listedeki LKD üyesi arkadaşlara... Ben bu çocuğun yazdıklarını /dev/null'a koyuyorum, o sıkıntı olmaz. Fakat kill filedaki adresin @linux.org.tr olması bir sıkıntı tabii. Hatırlatmış olayım... -- roktas
Re: test amacli gonderiyorum 5...:(...yanitlamayin arkadaslar...
Walla olaya direk ...sacmalamayi kes diyerek baslayan sensin sayin roktas... ayrica ailemin verdigi terbiye senin gibi, insalara merhaba demeden direk ...sacmalamayi kes diyerek baslamak degil... kulaginda kupe olsun... tanimadigin insanlara direk ...sacmalamayi kes dersen benim verdigimden daha farkli tepkilerle karsilasir... /dev/null da senin gidecegin yer olsa gerek :-P cunku kucukken ogretmemisler olsa gerek ki hem kabahatli hemde guclu olmaya calisan sensin... listedeki arkadaslara da burdan da bunu animsatmak isterim... vede eninde sonunda bu mail i listeyede ulastiracagim... if (Adam not in [Recai Okta#351; [EMAIL PROTECTED] , Terbiyesiz, Allah'in Islah Etmedegi, Ultra Zeki, ... ] ) { printf(herkese kolay gelsin... ve Allah sabirlar versin hepimize\n); } 08.12.2007 tarihinde Recai Okta#351; [EMAIL PROTECTED] yazm#305;#351;:- T#305;rnak içindeki metni gizle - * Tolun ARDAHANLI [2007-12-08 12:48:01+0200] Arkadasim bak sacmalik olarak nitelendiripte adamin asabini bozma burda denemezsek nerde deneyegiz zeki arkadasim... rakkas:-( Çocuk... Terbiyeyi ailen mi vermedi, sen mi almad#305;n oras#305;n#305; bilemiyorum. Allah seni islâh etsin! PS: Listedeki LKD üyesi arkada#351;lara... Ben bu çocu#287;un yazd#305;klar#305;n#305; /dev/null'a koyuyorum, o s#305;k#305;nt#305; olmaz. Fakat kill filedaki adresin @ linux.org.tr olmas#305; bir s#305;k#305;nt#305; tabii. Hat#305;rlatm#305;#351; olay#305;m... -- roktas Tolun ARDAHANLI [EMAIL PROTECTED] wrote: Walla olaya direk ...sacmalamayi kes diyerek baslayan sensin sayin roktas... ayrica ailemin verdigi terbiye senin gibi, insalara merhaba demeden direk ...sacmalamayi kes diyerek baslamak degil... kulaginda kupe olsun... tanimadigin insanlara direk ...sacmalamayi kes dersen benim verdigimden daha farkli tepkilerle karsilasir... /dev/null da senin gidecegin yer olsa gerek :-P cunku kucukken ogretmemisler olsa gerek ki hem kabahatli hemde guclu olmaya calisan sensin... listedeki arkadaslara da burdan da bunu animsatmak isterim... vede eninde sonunda bu mail i listeyede ulastiracagim... if (Adam not in [Recai OktaÅ [EMAIL PROTECTED] , Terbiyesiz, Allah'in Islah Etmedegi, Ultra Zeki, ... ] ) { printf(herkese kolay gelsin... ve Allah sabirlar versin hepimize\n); } 08.12.2007 tarihinde Recai OktaÅ [EMAIL PROTECTED] yazmıÅ: * Tolun ARDAHANLI [2007-12-08 12:48:01+0200] Arkadasim bak sacmalik olarak nitelendiripte adamin asabini bozma burda denemezsek nerde deneyegiz zeki arkadasim... rakkas:-( Ãocuk... Terbiyeyi ailen mi vermedi, sen mi almadın orasını bilemiyorum. Allah seni islâh etsin! PS: Listedeki LKD üyesi arkadaÅlara... Ben bu çocuÄun yazdıklarını /dev/null'a koyuyorum, o sıkıntı olmaz. Fakat kill filedaki adresin @ linux.org.tr olması bir sıkıntı tabii. HatırlatmıŠolayım... -- roktas -- Tolun ARDAHANLI Bilgisayar Muhendisi E-posta: [EMAIL PROTECTED] Icq:326600 Tolun ARDAHANLI Computer Engineer E-mail: [EMAIL PROTECTED] Icq:326600 - Looking for last minute shopping deals? Find them fast with Yahoo! Search.
Re:test amacli gonderiyorum 5...:(...yanitlamayin arkadaslar...
Walla olaya direk ...sacmalamayi kes diyerek baslayan sensin sayin roktas... ayrica ailemin verdigi terbiye senin gibi, insalara merhaba demeden direk ...sacmalamayi kes diyerek baslamak degil... kulaginda kupe olsun... tanimadigin insanlara direk ...sacmalamayi kes dersen benim verdigimden daha farkli tepkilerle karsilasir... /dev/null da senin gidecegin yer olsa gerek :-P cunku kucukken ogretmemisler olsa gerek ki hem kabahatli hemde guclu olmaya calisan sensin... listedeki arkadaslara da burdan da bunu animsatmak isterim... vede eninde sonunda bu mail i listeyede ulastiracagim... if (Adam not in [Recai Oktaş [EMAIL PROTECTED] , Terbiyesiz, Allah'in Islah Etmedegi, Ultra Zeki, ... ] ) { printf(herkese kolay gelsin... ve Allah sabirlar versin hepimize\n); } 08.12.2007 tarihinde Recai Oktaş [EMAIL PROTECTED] yazmış: * Tolun ARDAHANLI [2007-12-08 12:48:01+0200] Arkadasim bak sacmalik olarak nitelendiripte adamin asabini bozma burda denemezsek nerde deneyegiz zeki arkadasim... rakkas:-( Çocuk... Terbiyeyi ailen mi vermedi, sen mi almadın orasını bilemiyorum. Allah seni islâh etsin! PS: Listedeki LKD üyesi arkadaşlara... Ben bu çocuğun yazdıklarını /dev/null'a koyuyorum, o sıkıntı olmaz. Fakat kill filedaki adresin @ linux.org.tr olması bir sıkıntı tabii. Hatırlatmış olayım... -- roktas -- Tolun ARDAHANLI Bilgisayar Muhendisi E-posta: [EMAIL PROTECTED] Icq:326600 Tolun ARDAHANLI Computer Engineer E-mail: [EMAIL PROTECTED] Icq:326600
test amacli gonderiyorum...SONUCLARI...
Merhabalar; Oncelikle herkese sabrindan dolayi tesekkur ediyor ve anlayislarina siginarak SONUCU bildirmek istiyorum([EMAIL PROTECTED] haric)... Arkadaslar denemelerimde gordum ki debian-user-turkish mail listesine gonderilen mailler gmail sunucularindan gonderildiginde geriye gonderdiginiz mailler geri gelmiyor. Hatta geri gelmedigi icin gitmedi zannedilip, arka arkaya gondermeye baslayabilirsiniz... ki gayet dogal bir olay... Ancak bu durum sadece gmail icin gecerli olarak biliyoruz(Syn:M.ATIF CEYLAN bey ile gorusmelerimizde bu karara ulastik ki kendiside daha once boylesi bir durumla karsi karsiya kalmis)... Sozun kisasi bu test amacli gonderiyorum... serisi mailler bize bunu kanitlamistir... Bunu deneme esnasinda da [EMAIL PROTECTED] sahsiyetinin de serzenislerini anliyorum... Ancak uslubunu kendi kankalarina kullanmasi gerektigine inaniyorum... if (Adam not in [Recai Oktaş [EMAIL PROTECTED]http://us.f539.mail.yahoo.com/ym/[EMAIL PROTECTED] , Terbiyesiz, Allah'in Islah Etmedegi, Ultra Zeki, ... ] ) { printf(Herkese kolay gelsin... ve Allah sabirlar versin hepimize...\n); } -- Tolun ARDAHANLI Bilgisayar Muhendisi E-posta:[EMAIL PROTECTED] Icq:326600 Tolun ARDAHANLI Computer Engineer E-mail:[EMAIL PROTECTED] Icq:326600
test amacli gonderiyorum 2...:)
Arkadaslar testini yapacak oldugum maildir... O yuzden dikkate almayin... Kusuruma bakmayin Mailin gidip gitmedigine dair bir ileti almaya calisiyorumda ;)... Herkese sabrindan ve anlayisindan dolayi tesekkur ediyorum... -- Tolun ARDAHANLI Bilgisayar Muhendisi E-posta:[EMAIL PROTECTED] Icq:326600 Tolun ARDAHANLI Computer Engineer E-mail:[EMAIL PROTECTED] Icq:326600
Re: Asterisk kaynak koddan derleme sorunu
Engin KUZU yazmış: Selamlar; Astersik'in 1.4.15 sürümünü derlemeye çalışıyorum. Derleme öncesi asterisk için build-dep (Build dependency) indirdim. Aşağıdaki gibi bir hata alıyorum. İnternette araştırmalarım sonucunda henüz bir çözüme kavuşamadım. ... (Sayfalarca hata...) Hatanin ilk olustugu satirlari gorebilir miyiz ? Genellikle kod derlemelerinde sonraki hatalar, ilklere bagli olur. iyi calismalar Afsin Taskiran -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Asterisk kaynak koddan derleme sorunu
Hata Makefile tarafından main/editline dizini altındaki configure betiğini çalıştırdıktan sonraki işlemlerde alınıyor. cd editline test -f config.h || CFLAGS=-pthread -I/home/engin/src/asterisk-1.4.15 /include -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -g3 -include /home/engin/src/asterisk-1.4.15/include/asterisk/autoconfig.h -march=i686 -O6 LDFLAGS= ./configure --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --with-ncurses= --with-curses= --with-termcap= --with-tinfo= creating cache ./config.cache checking for gcc... gcc checking whether the C compiler (gcc -pthread -I/home/engin/src/asterisk- 1.4.15/include -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -g3 -include /home/engin/src/asterisk- 1.4.15/include/asterisk/autoconfig.h -march=i686 -O6 ) works... yes checking whether the C compiler (gcc -pthread -I/home/engin/src/asterisk- 1.4.15/include -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -g3 -include /home/engin/src/asterisk- 1.4.15/include/asterisk/autoconfig.h -march=i686 -O6 ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking how to run the C preprocessor... gcc -E checking host system type... i686-pc-linux-gnu checking for a BSD compatible install... /usr/bin/install -c checking for ranlib... ranlib checking for ar... /usr/bin/ar checking for tgetent in -ltermcap... yes checking for termcap.h... yes checking for sys/cdefs.h... yes checking for vis.h... no checking for issetugid... no checking for strlcat... no checking for strlcpy... no checking for fgetln... no checking for strvis... no checking for strunvis... no updating cache ./config.cache creating ./config.status creating Makefile creating config.h make -C editline libedit.a /bin/sh makelist -h common.c common.h /bin/sh makelist -h emacs.c emacs.h /bin/sh makelist -h vi.c vi.h /bin/sh makelist -fh common.h emacs.h vi.h fcns.h /bin/sh makelist -fc common.h emacs.h vi.h fcns.c if uname -s | grep -qi cygwin; then cat fcns.c | sed -e s/sys\.h/config.h/g fcns.c.copy; mv --force fcns.c.copy fcns.c; fi /bin/sh makelist -bh common.c emacs.c vi.c help.h /bin/sh makelist -bc common.c emacs.c vi.c help.c if uname -s | grep -qi cygwin; then cat help.c | sed -e s/sys\.h/config.h/g help.c.copy; mv --force help.c.copy help.c; fi /bin/sh makelist -e common.c emacs.c vi.c chared.c el.c hist.c key.c map.c parse.c prompt.c read.c refresh.c search.c sig.c term.c tty.c fcns.c help.c editline.c gcc -c -pthread -I/home/engin/src/asterisk-1.4.15/include -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -g3 -include /home/engin/src/asterisk- 1.4.15/include/asterisk/autoconfig.h -march=i686 -O6 '-D__RCSID(x)=' '-D__COPYRIGHT(x)=' '-D__RENAME(x)=' '-D_DIAGASSERT(x)=' -I. editline.c -o editline.o_a Bu aşamadan sonra aşağıdaki hatalar gelmeye başlıyor. common.c: In function 'ed_digit': common.c:405: error: 'EM_UNIVERSAL_ARGUMENT' undeclared (first use in this function) common.c:405: error: (Each undeclared identifier is reported only once common.c:405: error: for each function it appears in.) In file included from editline.c:5: emacs.c: In function 'em_inc_search_next': emacs.c:474: error: 'ED_SEARCH_NEXT_HISTORY' undeclared (first use in this function) emacs.c: In function 'em_inc_search_prev': emacs.c:487: error: 'ED_SEARCH_PREV_HISTORY' undeclared (first use in this function) In file included from editline.c:6: vi.c: In function 'vi_search_prev': vi.c:779: error: 'ED_SEARCH_PREV_HISTORY' undeclared (first use in this function) vi.c: In function 'vi_search_next': vi.c:792: error: 'ED_SEARCH_NEXT_HISTORY' undeclared (first use in this function) vi.c: In function 'vi_repeat_search_prev': vi.c:825: error: 'ED_SEARCH_PREV_HISTORY' undeclared (first use in this function) vi.c:826: error: 'ED_SEARCH_NEXT_HISTORY' undeclared (first use in this function) In file included from editline.c:7: chared.c: In function 'ch_init': chared.c:442: error: 'ED_UNASSIGNED' undeclared (first use in this function) chared.c: In function 'ch_reset': chared.c:479: error: 'ED_UNASSIGNED' undeclared (first use in this function) In file included from editline.c:8: el.c: In function 'el_get': el.c:284: warning: dereferencing type-punned pointer will break strict-aliasing rules el.c:288: warning: dereferencing type-punned pointer will break strict-aliasing rules In file included from editline.c:10: key.c: In function 'key_add': key.c:202: error: 'ED_SEQUENCE_LEAD_IN' undeclared (first use in this function) key.c: In function 'key_clear': key.c:225: error: 'ED_SEQUENCE_LEAD_IN' undeclared (first use in this function) key.c: In function 'node_trav': key.c:289: error: 'ED_END_OF_FILE' undeclared (first use in this function) In file included from editline.c:11: map.c: At top level: map.c:69: error: 'ED_TTY_SIGINT' undeclared here (not in a function) map.c:70: error: 'EM_DELETE_OR_LIST' undeclared here
Asterisk kaynak koddan derleme sorunu
Astersik'in 1.4.15 sürümünü derlemeye çalışıyorum. Derleme öncesi asterisk için build-dep (Build dependency) indirdim. Aşağıdaki gibi bir hata alıyorum. İnternette araştırmalarım sonucunda henüz bir çözüme kavuşamadım. ... (Sayfalarca hata...) ... help.c:179: error: (near initialization for 'el_func_help[87].func') help.c:181: error: initializer element is not constant help.c:181: error: (near initialization for 'el_func_help[88].func') help.c:183: error: initializer element is not constant help.c:183: error: (near initialization for 'el_func_help[89].func') make[2]: *** [editline.o_a] Hata 1 make[1]: *** [editline/libedit.a] Hata 2 make: *** [main] Hata 2 Debian (unstable) depolarından indirmiş olduğum kaynak kodun derlenmesi sırasında da aynı hatayı alıyorum.
Re: test amacli gonderiyorum...SONUCLARI...
Merhaba; Listeye gonderdiginiz maillerin bir kopyasinin gonderen adrese de iletilmesi istege baglidir. Mailman, ezmlm gibi listeci arayuzlerinden kullanici bu tercihini degistirebilir. Tabi ki maillist admin bu secenegi kapatarak herkesin global olarak tek ayar kullanmasini da saglayabilir. Teknik konular haricinde mail listlere pek yazi yazdigimi hatirlamiyorum ama bunu da bir sorumluluk olarak gordum. Kac senedir ben de bu sektordeyim ve dediklerinizin bir kismini dogruluyorum. Kimse kimseyi tanimadan fikir yurutmemelidir. Ancak bu sizin icin de gecerli. Kendisini ovmek icin soylemiyorum ama su asamada birilerinin de size kimin de kim oldugunu anlatmasini gerekiyor. Recai Oktas benim ve kendisini taniyan bir cok insanin saygi duydugu biridir. Ayrica Recai Bey'in ozel bir durumu vardir ki debian-turkish listesinden sorumludur. Bizim sektorde dunya cok cok kucuk. Bir gun tanimadiginiz birine soz soylediginiz icin yuzunuz kizarmasin lutfen. Bundan sonra yazmak istedikleriniz olursa da ozelden yazalim ki Debian listeleri Teknik tartisma listesi olarak kalabilsin. Saygilar Afsin Taskiran EnderUnix SDT ~ Turkey www.enderunix.org/afsin Tolun ARDAHANLI yazmış: Merhabalar; Oncelikle herkese sabrindan dolayi tesekkur ediyor ve anlayislarina siginarak SONUCU bildirmek istiyorum([EMAIL PROTECTED] mailto:[EMAIL PROTECTED] haric)... Arkadaslar denemelerimde gordum ki debian-user-turkish mail listesine gonderilen mailler gmail sunucularindan gonderildiginde geriye gonderdiginiz mailler geri gelmiyor. Hatta geri gelmedigi icin gitmedi zannedilip, arka arkaya gondermeye baslayabilirsiniz... ki gayet dogal bir olay... Ancak bu durum sadece gmail icin gecerli olarak biliyoruz(Syn:M.ATIF CEYLAN bey ile gorusmelerimizde bu karara ulastik ki kendiside daha once boylesi bir durumla karsi karsiya kalmis)... Sozun kisasi bu test amacli gonderiyorum... serisi mailler bize bunu kanitlamistir... Bunu deneme esnasinda da [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] sahsiyetinin de serzenislerini anliyorum... Ancak uslubunu kendi kankalarina kullanmasi gerektigine inaniyorum... if (Adam not in [ Recai Oktaş [EMAIL PROTECTED] http://us.f539.mail.yahoo.com/ym/[EMAIL PROTECTED] , Terbiyesiz, Allah'in Islah Etmedegi, Ultra Zeki, ... ] ) { printf(Herkese kolay gelsin... ve Allah sabirlar versin hepimize...\n); } -- Tolun ARDAHANLI Bilgisayar Muhendisi E-posta:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] Icq:326600 Tolun ARDAHANLI Computer Engineer E-mail:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] Icq:326600 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Asterisk kaynak koddan derleme sorunu
* Engin KUZU [2007-12-08 17:55:40+0200] Astersik'in 1.4.15 sürümünü derlemeye çalışıyorum. Derleme öncesi asterisk için build-dep (Build dependency) indirdim. Aşağıdaki gibi bir hata alıyorum. İnternette araştırmalarım sonucunda henüz bir çözüme kavuşamadım. ... (Sayfalarca hata...) ... help.c:179: error: (near initialization for 'el_func_help[87].func') help.c:181: error: initializer element is not constant help.c:181: error: (near initialization for 'el_func_help[88].func') help.c:183: error: initializer element is not constant help.c:183: error: (near initialization for 'el_func_help[89].func') make[2]: *** [editline.o_a] Hata 1 make[1]: *** [editline/libedit.a] Hata 2 make: *** [main] Hata 2 Debian (unstable) depolarından indirmiş olduğum kaynak kodun derlenmesi sırasında da aynı hatayı alıyorum. Derlemeyi neyle yapıyorsunuz? apt-get source ile aldığınız kaynak kodu açtıktan sonra dizine girip paketi oluşturmalısınız: dpkg-buildpackage -rfakeroot -us -uc Bu işlemi ./configure make şeklinde yaparsanız debian/ altındaki yamalar ve debian/rules'daki derleme seçenekleri vesaire uygulanmaz. Yukarıdaki komutu kullandığınızdan emin olun. (Anladığım kadarıyla kaynakta bazı yerleri de değiştirmişsiniz. Şu aşamada temiz bir başlangıç yaparak kaynak kodu tekrar almanız yararlı olabilir.) -- roktas
Re: mount USB drive at boot: fsck failure - kernel upgrade
On Tue, Dec 04, 2007 at 09:51:27AM -0500, Bogart Salzberg wrote: Would you personally use the kernel from testing on a production box? Is it really as simple as apt-get upgrade linux-image - restart - done? I've been cautious about using packages from testing, because they seem to depend on a lot of other packages from testing and I'm nervous about the snowball effect on a box that is supposed to be stable. Use http://www.backports.org/ -- Chris. == -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
How to resolv samba server names when using Ad-Hoc
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello,.. maybe this is the wrong place i will be glad if it will be forwarded to the correct place. On my lpatop i have samba shares (Debian Testing) and the configuration is here : [CODE][global] workgroup = MSHOME netbios name = acerium security = share server string = %h server [iso] path = /mnt/hda2/iso browsable = yes writeable = no guest ok =yes comment = ISO files (mostly debian related) [movies] forceuser = Temp path = /mnt/hda2/movie comment = Guess what ? browsable = yes guest ok=yes writeable = no [download] forceuser = Temp path = /mnt/hda3/download comment = Guess what ? browsable = yes guest ok=yes writeable = no [games] forceuser = Temp path = /mnt/hda2/games comment = Guess what browsable = yes guest ok=yes writeable = no [/CODE] When i work with routers (i get an ip and get all the names from nameservers) i can easily accsed by smb://acerium (servername) or can be checked by smbclient -L //acerium but when i work with Ad-Hoc i can't resolve. when i try to check smb://work_group i get no computers in your workgroup. (from memory maybe it said in diffrent words) maybe it is related to the thing that the samba server isn't the main one . or some thing related to domain master = yes but the problem with that is : (it will interfeare with other NT domain masters.) Thank you in advance.. - -- - -- Could you at least use man ? Jabka Atu (aka mha13/Mashrom Head) || bsh83.blogspot.com - -- -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iQIVAwUBR1qAEm9p6JnF9I1qAQI+Tw//Sexn6r1LXEHlWC8LnHgAJZA60gIEwZpu /OdReJpnTyVXihHTF19pc1YaagYB32azwr8JqwzYdU/fwWdRivb0Al92hG5hvB3b AQ1Y5KyXtLO871LqwYMKNdh/UtKpiP8c7I8Kv1jN6FOnZ4ZCmWjBo5EnW3Z8XuSh PJl+VnScTW9mVmwjY/CQIUB4ac/WzjSWvtHHtYz7+jo0H9z9KJ4R92Lif5IU977P BHktnk5ziIegvpDLhUpXtEX3E5zf6HKGylb0yZqagY/e94e94nyh0CCkKRF48EOI +ZTIaHTFGOyTdW2ogYREJwxkTbU6CB4VtggizK0O+d3HqgMJJpkNZK7YI1OKYwGs ZsUHeUd9qDWfDHR85VpvQqCk4ND7gVEDe4k94TReUw/PoJ1cVITvAuAjJAiSDKx5 gxm6LQAF0Ats2bZXOYGGh37wz2QNSgB3zObsyV4FZgz2peSHoaAsYakQKNiwlxjG t8xVpa1kUiEmgE2J5hG7BrqbDgzmw6h8QRG6tqzBXS6REcnE2dyu9ITGWMr66FkH qpC9M6O2biOsXGZDnxf077PCvCWzgZdcSMtOXEmnsFuJ8idU5oIj6npHGbY42hdO YQ8jTol0UB5WzGRzODi0w6h8/uoPTDJC3Rms9jqrCjJiOUu1gGByhNmJsSjnGRD+ 8aT66R+ylI0= =U2Oc -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: OT: clicky keyboards
On 07/12/2007, Andrew Sackville-West [EMAIL PROTECTED] wrote: As I type this, Beethoven is (lightly) thundering out of my speakers. Clickity-clack does *not* go well with good music oh, they're not that loud. And it's all about the rhythm. just type in time to the music ;-) No, don't! I study with someone who types to the rhythms in his head, even when he's _not_ at a keyboard. Drives me nuts. Dotan Cohen http://what-is-what.com http://gibberish.co.il א-ב-ג-ד-ה-ו-ז-ח-ט-י-ך-כ-ל-ם-מ-ן-נ-ס-ע-ף-פ-ץ-צ-ק-ר-ש-ת A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing?
Re: OT: clicky keyboards
On 07/12/2007, Nate Bargmann [EMAIL PROTECTED] wrote: I have a bit of trouble with mine and the PS/2 to USB adaptor at work. Upon a cold boot I have to unplug the cable from the rear of the keyboard and plug it back in. If the laptop has been in suspend, XP will never see it again. :-/ File a bug with Microsoft. :) Dotan Cohen http://what-is-what.com http://gibberish.co.il א-ב-ג-ד-ה-ו-ז-ח-ט-י-ך-כ-ל-ם-מ-ן-נ-ס-ע-ף-פ-ץ-צ-ק-ר-ש-ת A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing?
Where is LUKS passphrase stored?
I am about to wipe my server and reinstall, and I have an external 1394a disk that is encrypted with LUKS and dmcrypt. Is the passphrase stored in the header of the partition on the external drive? If it is then it should not be an issue to reinstall my server but if it is stored anywhere on the server then will I be able to get access to my data after reinstalling? --andrew -- GnuPG Key ID: ECB18ABA Fingerprint: FDF3 91FC F5BC 1164 E217 315E 337E 219B ECB1 8ABA signature.asc Description: OpenPGP digital signature
Re: OT: clicky keyboards
* Dotan Cohen [EMAIL PROTECTED] [2007 Dec 08 07:02 -0600]: On 07/12/2007, Nate Bargmann [EMAIL PROTECTED] wrote: I have a bit of trouble with mine and the PS/2 to USB adaptor at work. Upon a cold boot I have to unplug the cable from the rear of the keyboard and plug it back in. If the laptop has been in suspend, XP will never see it again. :-/ File a bug with Microsoft. :) Snort! I really don't care *that* much. It's the company laptop where our IT gurus saw fit to strip it of the Dell control software so I can't even adjust such things as the sensitivity of the stupid scratch pad. I hate those things with a passion... That why I own Trackpoint Thinkpads. - Nate -- Wireless | Amateur Radio Station N0NB | Successfully Microsoft Amateur radio exams; ham radio; Linux info @ | free since January 1998. http://www.qsl.net/n0nb/ | Debian, the choice of My Kawasaki KZ-650 SR @| a GNU generation! http://www.networksplus.net/n0nb/ | http://www.debian.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: OT: clicky keyboards
Ron Johnson wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 12/06/07 21:16, Douglas A. Tutty wrote: On Thu, Dec 06, 2007 at 07:45:12PM -0600, Ron Johnson wrote: [snip] Orchestral music doesn't seem to have a consistent rhythm in the same sense that common music does. Try Bach. I know its not orchestral but try Toccata and Fugue in D minor; the fugue part. However, I'm assuming that you only have one keyboard on which to type not the 3 (or was it four) for which it was written. :) As a matter of fact, I listened to them earlier this afternoon. I download KUSC's Sunday night opera every week. Lovely. Was Massenet's Werther last Sunday. Hugo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: OT: clicky keyboards
Andrew Sackville-West wrote: Totally OT, except it's on my debian box ;) If you need that amazingly insightful gift for someone (yourself?) this year, check out www.clickykeyboards.com for real IBM keyboards. Mine just arrived and I'm in heaven. I hate to bump a commercial enterprise like that, but I know many of you do lots of typing... Bought mine now 14 years ago, still going strong. For seat #2 bought another one. I won't use any other keyboard. Hugo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: mounting without GUI folder
On Sat, 2007-12-08 at 10:56 -0500, John Miller wrote: Hey there, M, I think you might be looking for: Preferences - Removable Drives and Media - Storage - Browse removable media when inserted aha, never thought it might apply to HDs too ;) thanks! I don't know of a way to keep the disk icon from appearing on the desktop, though. that one is much less of an issue. FYI, GNOME isn't really a window manager, it's a desktop environment. It provides standardized file icons, panels, and a way for applications to talk to each other, but it still relies on a separate window manager (metacity by default, but you can choose from a whole bunch of other GNOME-compliant window managers). The window manager is the program that says how windows will be drawn and how they'll behave. For example, the window manager defines how a window will be minimized, maximized, closed, etc. GNOME works on top of the window manager. Yes I still need to get to grips with this terminology/distinction! And to try other than metacity... thanks, Michael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: why does the shell show commands foolishly when I press UP key?
On Wed, 14 Nov 2007 11:09:35 +0100, Misko wrote: On Mon, Nov 12, 2007 at 10:49:49PM -0800, [EMAIL PROTECTED] wrote: I often use UP key to get commands entered previously. The shell show some commands again and again, just because I have used them several times. Can the shell be more smart? Put this line into .bashrc: export HISTCONTROL=ignoredups Mine is export HISTCONTROL=ignoreboth Even more cleaner. -- Tong (remove underscore(s) to reply) http://xpt.sourceforge.net/techdocs/ http://xpt.sourceforge.net/tools/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
laptop brigtness up/down buttons issue
Greetings all, Recently I installed debian on a HP Compaq Presario V3646 laptop, everything went ok, except that the brightness adjustment buttons (Fn+F6/F7) behave strangely: if you made some brightness adjustment in X, you have to switch to a tty and then switch back to X to make the adjustment effective (same situation in tty, in BIOS and Windows it is OK). Anyone experienced similar problem? problem related to keycodes? thanks! Cheers, Deephay -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
SSH - Relay?
There are times when I'm at a client's system and I need to access my home computer to tell it to resend data or do something similar so I've just ssh'ed in to my home computer from outside. My firewall forwards a port to my workstation and there's no need to go into the rest of the security details. Basically, with my current ISP, I can just ssh to my home system. I also have a few computers at client's sites that I may need to reach that are behind firewalls, so I have a system where I can post a connection request to a web page, those computers will see it, and issue a command like this (with the variables replaced, of course): ssh -l $user -nNT -R $port:localhost:22 $domain /dev/null 21 Then when it creates the reverse ssh tunnel, I can login to that system through the tunnel. I don't want to go into issues with my current ISP, but I would like to switch to Verizon FiOS for a number of reasons. I'd rather not have to pay the extra for a static IP and the ability to run a web server. I considered it, but then *I* have to maintain that server and it's roughly $50 a month more than what I'd be paying for home service. My current hosting company (Westhost) charges me something like $10-$12 a month. While it'd be nice to host my sites here in terms of some conveniences, the price and security hassle outdoes the benefit. The one issue with Verizon is that I see in their ToS that I can't run any kind of server on my account and I know they block at least port 80. I don't plan to use port 80, but if I lost the ability to ssh into my home computer, it'd hurt in terms of extra on-sight trips. Is there some way to have two systems use ssh and meet in the middle, at a relay site, then form a direct connection? I could use my hosting site as a relay, but sometimes ssh connections have a latency issue, so once I made a connection, I'd want to find a way to create a direct connection. If that can't be done, I'm open to other suggestions. Thanks! Hal -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [OT] LaTeX
On Sun, 25 Nov 2007 11:12:38 -0500, Michael Pobega wrote: I'd like to begin writing my coursework for college in LaTeX, but I've no clue where to start. . . LaTeX is not recommended for casual writing. The learning curve is so steep that most people would give up before they see the beauty of LaTeX. Any point in the right direction would really help! Check and see if this can be of any help All You Need to Know about Latex http://xpt.sourceforge.net/techdocs/language/latex/ HTH . . . -- Tong (remove underscore(s) to reply) http://xpt.sourceforge.net/techdocs/ http://xpt.sourceforge.net/tools/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Rebuilding the official Debian 2.6.23 kernel package
Hi, In 2.6.23 kernels this site told you how to rebuild the Debian kernel package: http://kernel-handbook.alioth.debian.org/ch-common-tasks.html#s-common-official In 2.6.23 I can no longer do it. It fails this: fakeroot make -f debian/rules.gen setup-i386-none-686 That flavor no longer exists. Replacing it with: fakeroot make -f debian/rules.gen setup_i386_none_686 the patching operation fails with: ... Warning: No version.Debian file, assuming pristine Linux 2.6.23 (+) OKdebian/version.patch (+) OKdebian/kernelvariables.patch (+) OKdebian/doc-build-parallel.patch (+) OKdebian/scripts-kconfig-reportoldconfig.patch (+) OKdebian/powerpc-mkvmlinuz-support-ppc.patch (+) OKdebian/powerpc-mkvmlinuz-support-powerpc.patch (+) OKdebian/drivers-ata-ata_piix-postpone-pata.patch 1 out of 1 hunk FAILED -- saving rejects to file drivers/net/Kconfig.rej 2 out of 5 hunks FAILED -- saving rejects to file drivers/net/tg3.c.rej (+) FAIL debian/dfsg/drivers-net-tg3-fix-simple.patch make[1]: *** [debian/stamps/source] Error 1 ... And true enough that tg3.c just is not the same. Has anybody tried this or am I the first one? Hugo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
mounting without GUI folder
Folks, can somebody point me to the magic configuration key that will allow me to mount a filesystem from a shell without it opening a nwe GUI window of its contents? And ideally without adding an icon to the desktop? I'm running 'etch' with Gnome as the window manager. Thanks, M -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]