Re: HELP- very slow download speeds
On Wed, 03 Jun 2015 09:41:49 -0700 Gary Roach wrote: > On 05/25/2015 11:16 PM, Petter Adsen wrote: > > iperf will use either TCP or UDP. :) > > > > Petter > > > Well, I'm back > > I used iperf3 as follows: > iperf3 -c iperf.scottlinux.com > > The program just hangs. I also tried it with the -R switch with the same > result. I then set up one the other computers on my internal net as a > server (iperf3 -s) and got the following results: > > [ ID] Interval Transfer Bandwidth Retr > [ 4] 0.00-10.00 sec 1.02 GBytes 878 Mbits/sec 0 sender > [ 4] 0.00-10.00 sec 1.02 GBytes 877 Mbits/sec > receiver > > iperf Done. > > My local network seems to be working fine (I tried the -R switch as > well. Same good results). Needless to say, I'm using a 100 Mbyte/second > network. Seems good. > I am behind a verizon M1424WR rev. I router firewall that has been free > of any "known" transmission trouble before. Could the firewall be the > problem or has scottlinux.com shut down their iperf3 server. Well, it's not shut down, as I just tried it and it works fine here. Maybe it was down, though, and you should try again? If it still doesn't work, then check your firewall. It shouldn't give you any problems, as you are simply trying to establish a connection to port 5201 on a remote machine, but check. Enable firewall logging, if possible, and see if anything gets blocked. Verify that you can reach the webserver running on the same host. Also try with UDP ("-u -b 0"). Petter -- "I'm ionized" "Are you sure?" "I'm positive." pgpqAssy6poFn.pgp Description: OpenPGP digital signature
Re: Jessie - Mate - LibreOffice Need larger fonts everywhere
Richard Owlett wrote: Sven Arvidsson wrote: On Mon, 2015-06-01 at 15:23 -0500, Richard Owlett wrote: 2. I want to force a specific default Font Family and Font Size for cells on *ALL* spreadsheets. I can set for specific region of current spreadsheet only. This will let you change the default font: http://os4me.com/open-source-training/libreoffice/calc/set-default-font/ Thank you. That gets me most of the way. I wasn't successful in saving the "template". I suspect permissions issue and/or need to reread some portion of instructions. Rushed right now, should know more by tomorrow. That was *not* the problem. On initial readS I had had not caught the distinction between 1. default (read hard coded) behavior and 2. creating a template and then forcing that template to be always loaded (i.e. a "default template"). -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/556fea39.4050...@cloud85.net
Re: much longer boot time with jessie
Am 04.06.2015 um 06:59 schrieb David Wright: > $ systemd-analyze blame > 1min 13.144s acpi-support.service Can you please try and uninstall and purge the following packages (not typically needed with jessie anyway) acpid acpi-support-base acpi-support consolekit and report back if that makes a difference -- Why is it that all of the instruments seeking intelligent life in the universe are pointed away from Earth? signature.asc Description: OpenPGP digital signature
Re: much longer boot time with jessie
Quoting Fekete Tamás (fek...@gmail.com): >>> I have 7 years old computer with wheezy installed on it. Temporarly or not I >>> decided to keep this older version of Debian, because I upgraded to jessie >>> and >>> the boot time became extremey slower. To represent this with numbers: when >>> grub >>> finished with countdown, took 52 seconds to boot into GDM. >>> In wheezy it tooks only 30 sec (which is completely normal I think) with the >>> same conditions. My experience is similar on this 7 year old laptop. Typical timings: jessie wheezy 1 Grub to Login Prompt82 47 2 Login Prompt to VC Bash Prompt 33 6 3 Bash Command to X fully up 62 16 2 and 3 are faster if repeated after all the startup disk activity has subsided. 1 usually takes an infinite time if the module binfmt_misc is not loaded from /etc/modules. (See https://lists.debian.org/debian-user/2015/05/msg01060.html and follow the In-reply-to or References links. > So, firstly the slowlyness was not because of the first boot (because I tried > more than 10times) > Secondly, I can not say how the system would act for commands given by Michael > (because > I moved back to wheezy) Here's the output for this laptop: $ systemd-analyze blame 1min 27.935s ModemManager.service 1min 13.144s acpi-support.service 52.112s avahi-daemon.service 46.983s ntp.service 26.242s wicd.service 20.986s exim4.service 19.930s timidity.service 17.381s console-kit-daemon.service 16.372s binfmt-support.service 16.274s alsa-restore.service 16.273s console-kit-log-system-start.service 15.918s bluetooth.service 15.663s lm-sensors.service 15.303s systemd-logind.service 15.206s rc-local.service 15.202s systemd-user-sessions.service 15.200s apmd.service 15.199s rsyslog.service 15.199s virtualbox.service 15.199s loadcpufreq.service 15.198s gpm.service 11.174s colord.service 9.694s aumix.service 8.227s user@1000.service 7.388s polkitd.service 7.365s systemd-suspend.service 4.271s keyboard-setup.service 3.677s systemd-fsck@dev-disk-by\x2dlabel-john03.service 3.674s networking.service 3.618s kbd.service 2.958s nfs-common.service 2.916s systemd-modules-load.service 2.548s irqbalance.service 2.469s systemd-tmpfiles-setup-dev.service 2.342s resolvconf.service 2.199s systemd-tmpfiles-setup.service 2.019s systemd-setup-dgram-qlen.service 2.015s dev-hugepages.mount 1.926s dev-mqueue.mount 1.849s systemd-fsck@dev-disk-by\x2dlabel-john02.service 1.841s sys-kernel-debug.mount 1.829s hdparm.service 1.475s rpcbind.service 1.437s systemd-udev-trigger.service 1.415s gdomap.service 1.233s saned.service 1.164s cpufrequtils.service 868ms dev-disk-by\x2dlabel-john04.swap 654ms westw.mount 640ms kmod-static-nodes.service 545ms systemd-update-utmp.service 528ms systemd-udevd.service 512ms systemd-remount-fs.service 431ms rtkit-daemon.service 424ms systemd-backlight@backlight:intel_backlight.service 312ms systemd-rfkill@rfkill1.service 305ms systemd-rfkill@rfkill0.service 286ms systemd-sysctl.service 286ms systemd-rfkill@rfkill4.service 274ms systemd-rfkill@rfkill3.service 243ms systemd-tmpfiles-clean.service 237ms systemd-backlight@backlight:dell_backlight.service 195ms systemd-rfkill@rfkill2.service 120ms console-setup.service 109ms clamav-daemon.socket 95ms systemd-random-seed.service 91ms udev-finish.service 42ms home.mount 19ms proc-sys-fs-binfmt_misc.mount 12ms systemd-rfkill@rfkill5.service 12ms systemd-journal-flush.service 11ms systemd-update-utmp-runlevel.service 5ms sys-fs-fuse-connections.mount $ systemd-analyze critical-chain The time after the unit is active or started is printed after the "@" character. The time the unit takes to start is printed after the "+" character. graphical.target @2min 6.738s └─multi-user.target @2min 6.738s └─acpi-support.service @53.593s +1min 13.144s [in RED] └─basic.target @37.647s └─sockets.target @37.643s └─clamav-daemon.socket @37.530s +109ms [in RED] └─sysinit.target @37.517s └─systemd-journald.service @1min 50.051s └─syslog.socket @6.791s └─systemd-setup-dgram-qlen.service @4.768s +2.019s [in RED] └─system.slice @4.766s └─-.slic
Re: httpd virtual package
Anatoly A. Kazantsev wrote: > P.S: I'm not on the list, please keep me CCed >... > I have installed lighttpd (same for nginx) on stable/testing, > but it doesn't provide httpd virtual package. But it did. It showed as "Provides: httpd" in your data. That is how it provides that virtual name. > Provides: httpd, httpd-cgi There it is. :-) What are you missing that you are expecting to see? I have not used Lighttpd but I do use Nginx and like it and could answer questions concerning the use fo it. > $ aptitude show httpd > No current or candidate version found for httpd The "aptitude show" command shows information about a package name. The httpd name is not a package name. Therefore aptitude does not show it. > Same result from apt-cache: > $ apt-cache show httpd > N: Can't select versions from package 'httpd' as it is purely virtual > N: No packages found Same thing for apt-cache. However apt-cache tells you it is a pure virtual name and not a package and no packages named httpd are found. I think that is a little nicer. > I'll post some other information if you need it. This is my first time on > debian-user@lists.debian.org Welcome to the mailing list! I have CC'd you as requested. Good job on making that request. The default otherwise would be to reply only to the mailing list. Bob signature.asc Description: Digital signature
httpd virtual package
Hello, I have installed lighttpd (same for nginx) on stable/testing, but it doesn't provide httpd virtual package. $ aptitude show lighttpd Package: lighttpd State: installed Automatically installed: no Version: 1.4.35-4 Priority: optional Section: httpd Maintainer: Debian lighttpd maintainers Architecture: i386 Uncompressed Size: 779 k Depends: libattr1 (>= 1:2.4.46-8), libbz2-1.0, libc6 (>= 2.15), libfam0, libldap-2.4-2 (>= 2.4.7), libpcre3 (>= 8.10), libssl1.0.0 (>= 1.0.0), zlib1g (>= 1:1.1.4), init-system-helpers (>= 1.18~), perl, lsb-base (>= 3.2-14) | systemd (>= 29.1), mime-support, libterm-readline-perl-perl Recommends: spawn-fcgi Suggests: openssl, rrdtool, apache2-utils Provides: httpd, httpd-cgi ... $ aptitude show httpd No current or candidate version found for httpd Same result from apt-cache: $ apt-cache show httpd N: Can't select versions from package 'httpd' as it is purely virtual N: No packages found I'll post some other information if you need it. This is my first time on debian-user@lists.debian.org P.S: I'm not on the list, please keep me CCed -- Regards, Anatoly -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150604105843.ffd41f9a022a73ae70ba6...@gnu.org
Re: Old Computers
On Tue, Jun 02, 2015 at 07:04:13PM -0500, Jose Martinez wrote: > And I will probably not use these system(s) on line much if any at > all. So most of the security issues will fixed or not will not > really be a problem in this situation. > > I see I've sparked a pretty good discussion on the list. I sure > appreciate all the advice/information it will come in very handy > when I actually have the systems in hand. > -- > JM If you need linux on a 386 that's where I started with DosLinux. I still have a copy if you're interested. As I recall no Xwindows just command line. Mike -- "Why fit in when you can stand out?" - Dr. Seuss -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150603145539.GA19315@playground
Re: Old Computers
Renaud writes: > Which certainly taught you the hard way to draw one (or several) > diagonal pencil or ink lines across the top of your card deck... Or to number your cards so that you could simply run a scrambled deck through the card sorter. -- John Hasler jhas...@newsguy.com Elmwood, WI USA -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/874mmotqd6@thumper.dhh.gt.org
Re: pendrive permissions
On Wed 03 Jun 2015 at 19:56:36 +0200, Pol Hallen wrote: > >I think your user needs to be in the plugdev group. > > thanks Sven, users already were in plugdev... > > looking for I found something like polkit but I didn't solve :-/ Installed a minimal Debian Jessie. Installed xorg and mate. Plugged USB stick in. caja comes up. The device is mounted. Upgraded to testing. Same result as above. I'd look at your install method and not follow the example of the domain name you post with. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150603213911.gc24...@copernicus.demon.co.uk
Re: Old Computers
On Wed, 3 Jun 2015 13:08:44 -0700 "Larry Owens" wrote: > And do you remember carrying your punched card deck from the keypunch room to > the data center--and have someone bump into you and spill the cards on the > floor? Which certainly taught you the hard way to draw one (or several) diagonal pencil or ink lines across the top of your card deck... Cheers, Ron. -- First they ignore you, then they laugh at you, then they come to fight you, and then you win. -- Gandhi -- http://www.olgiati-in-paraguay.org -- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150603170841.033e8...@ron.cerrocora.org
Re: wget vs curl (was ... Re: debian 8)
Hi. On Wed, 3 Jun 2015 14:21:44 -0600 Bob Proulx wrote: > Reco wrote: > > On Wed, Apr 08, 2015 at 01:17:15PM -0600, Bob Proulx wrote: > > > David Wright wrote: > > > > Reco wrote: > > > > > So, in the case of doubt - you use curl or rebuild wget against > > > > > openssl. It's that simple. > > > > > > I know that people have strong feelings for and against curl and wget. > > > I haven't ever understood it. You are the first to quantify why you > > > think Debian's curl deals better with https sites. It appears the > > > issues all surround https handling. > > > > Indeed. For example, I stumble upon #686837 on regular basis. > > > > And I'd like to add that wget that's linked against gnutls *would* be > > good thing *if* it allowed to poke all GnuTLS knobs - #642051. But it > > does not. > > You might be interested to see curl 7.42.1-2 entered unstable today. > It immediately started core dumping for me. But see also Bug#787638 > where the affect was widespread and reportedly in libcurl3-gnutls. I > know that wget and httping were segfaulting for me too. An upgrade > later in the day pulled in more upgrades and solved the problem for me. Seems to be resolved in unstable, according to the bug. Still, thanks for the heads up. > http://bugs.debian.org/342719 > > Date: Sun, 03 May 2015 13:13:15 +0200 > Distribution: unstable > >* Switch curl binary to libcurl3-gnutls (Closes: #342719) > This is the first step of a possible migration to a GnuTLS-only > libcurl for Debian. Let's see how it goes. > > If you have opinions you might want to make your comments known. I have two. First - it seems like an extreme attempt to fix #768522 (#342719 does not provide a meaningful explanation for the switch). By itself, it's a good thing. Second - from now upon unstable Debian has one tool less for testing those misconfigured https web-servers. At least we still have socat for this :( But then again - there's nothing that a package rebuild cannot fix :) Reco -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150604001438.b5871157b8a4705b247e5...@gmail.com
Re: Old Computers
0C7 and 0CB compile errors anyone ? Cheers, Ron. -- First they ignore you, then they laugh at you, then they come to fight you, and then you win. -- Gandhi -- http://www.olgiati-in-paraguay.org -- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150603170919.0286c...@ron.cerrocora.org
Re: Iceweasel slow to freeze
I've attached my system log and perhaps I get help, as no luck with that big search engine. But it appears a bigger problem than iceweasel. Thanks a lot. On 15-06-02 7:58 PM, Ric Moore wrote: >>> Anyone here having serious issues with Iceweasel in Jessie. >> >> Yes it's a real pig, and resource hog. >> >>> I went to install some addons and the computer froze. Had to restart. >> >> No, never had that happen. >> >>> At other times, the browser had done same; cause the computer to >>> freeze. >> >> Are you sure it froze or it was just Iceweasel hogging the whole system? > > I've had firefox do the same. Just run it nekkid, without addons, and > see the difference. systemlog.odt Description: application/vnd.oasis.opendocument.text
Re: Problems with SSD
On 06/03/2015 03:51 AM, Petter Adsen wrote: On Tue, 2 Jun 2015 18:36:43 +0300 Selim T. Erdoğan wrote: On Fri, May 29, 2015 at 11:18:35AM +0200, Petter Adsen wrote: This just in: [12675.977977] ata5: hard resetting link [12680.979063] ata4: softreset failed (1st FIS failed) [12680.979080] ata4: hard resetting link [12685.976201] ata5: softreset failed (1st FIS failed) You could try forcing the drive to a lower speed to see if taxing the hardware less will avoid triggering the problem. Make a file /etc/modprobe.d/local.conf and put the single line options libata force=1.5G in it. Reboot. If it works, you can then try with 3.0G instead of 1.5G. Thanks, I will try that and see if it helps, but it seems a lot like a hardware problem. This motherboard is getting to be a few years old, and has been working fine up until now, it just started behaving like this a few days ago. I'm investigating new motherboards now, since I heavily suspect that is going to be what I'll end up having to do. The drives/controller are not heavily utilized when this happens, the machine is just churning along with low load. I always have gkrellm open, and there is never any hint that utilization has anything to do with this. You might have your power supply checked as well. With all of those drives, you might be straining for more juice and, as a result, the system appears flakey. Ric -- My father, Victor Moore (Vic) used to say: "There are two Great Sins in the world... ..the Sin of Ignorance, and the Sin of Stupidity. Only the former may be overcome." R.I.P. Dad. http://linuxcounter.net/user/44256.html -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/556f65d4.6020...@gmail.com
Re: Old Computers
Jose Martinez wrote: > Marc Shapiro wrote: > > Jose Martinez wrote: > > > Yeah, there's nothing like making an antique useful. I remember the > > > days of the PDP-11 running *nixWhat I wouldn't give to come up with > > > one of those old things!! > > > > My first programming class, back in 1976 was on a PDP-11. Those were the > > days. Bootstrap with physical toggle switches on the box to enter the > > binary code. > > Boy do I remember those toggle switches!!! A few years back, I built a Z-80 > based toy, and that was one of things I wanted t have...Toggle switches and > lights on the front panel! Made it work too. Put that PDP 11 experience to work! Here is a recent job posting for a PDP 11 Software Designer for a nuclear power plant. Some things never go out of style! Especially when working at a nuclear power plant. Hope they will have 500 years worth of spare parts. https://ca.linkedin.com/jobs2/view/28135735 January 20, 2015 Job description Design of new PDP-11 assembly level software as well as the extension of existing automated control systems to accommodate new functionality. ... Bob signature.asc Description: Digital signature
Re: wget vs curl (was ... Re: debian 8)
Reco wrote: > On Wed, Apr 08, 2015 at 01:17:15PM -0600, Bob Proulx wrote: > > David Wright wrote: > > > Reco wrote: > > > > So, in the case of doubt - you use curl or rebuild wget against > > > > openssl. It's that simple. > > > > I know that people have strong feelings for and against curl and wget. > > I haven't ever understood it. You are the first to quantify why you > > think Debian's curl deals better with https sites. It appears the > > issues all surround https handling. > > Indeed. For example, I stumble upon #686837 on regular basis. > > And I'd like to add that wget that's linked against gnutls *would* be > good thing *if* it allowed to poke all GnuTLS knobs - #642051. But it > does not. You might be interested to see curl 7.42.1-2 entered unstable today. It immediately started core dumping for me. But see also Bug#787638 where the affect was widespread and reportedly in libcurl3-gnutls. I know that wget and httping were segfaulting for me too. An upgrade later in the day pulled in more upgrades and solved the problem for me. http://bugs.debian.org/342719 Date: Sun, 03 May 2015 13:13:15 +0200 Distribution: unstable * Switch curl binary to libcurl3-gnutls (Closes: #342719) This is the first step of a possible migration to a GnuTLS-only libcurl for Debian. Let's see how it goes. If you have opinions you might want to make your comments known. Bob signature.asc Description: Digital signature
RE: Old Computers
-Original Message- From: Jose Martinez [mailto:jomartinez...@gmail.com] Sent: Wednesday, June 03, 2015 12:51 PM To: debian-user@lists.debian.org Subject: Re: Old Computers On 06/03/2015 05:30 AM, Sven Arvidsson wrote: > On Tue, 2015-06-02 at 19:04 -0500, Jose Martinez wrote: >> I see I've sparked a pretty good discussion on the list. I sure >> appreciate all the advice/information it will come in very handy when >> I actually have the systems in hand. > You could always try mining Bitcoin: > http://www.righto.com/2015/05/bitcoin-mining-on-55-year-old-ibm-1401.h > tml > > But I guess none of your systems are quite as old? ;) > Oh, Man, Holerith (It's been so long I'm not sure how to spell it anymore)...I learned to type on an IBM keypunch machine punching 80 column cards full of data for some statistical analysis (wrote the analysis proceedures in SPSS, too). Those were the days:-D And do you remember carrying your punched card deck from the keypunch room to the data center--and have someone bump into you and spill the cards on the floor? Larry -- JM -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/556f5aa9.60...@gmail.com -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/000f01d09e39$18b69dd0$4a23d970$@netptc.net
Re: Re (2): VoIP in jessie
On Wednesday 03 June 2015 14:41:21 pe...@easthope.ca wrote: > * From: Lisi Reisz There seem to be three of these, mutatis mutandis. Are they meant to mean anything? Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/201506032105.12684.lisi.re...@gmail.com
Re: Old Computers
On 06/03/2015 05:30 AM, Sven Arvidsson wrote: On Tue, 2015-06-02 at 19:04 -0500, Jose Martinez wrote: I see I've sparked a pretty good discussion on the list. I sure appreciate all the advice/information it will come in very handy when I actually have the systems in hand. You could always try mining Bitcoin: http://www.righto.com/2015/05/bitcoin-mining-on-55-year-old-ibm-1401.html But I guess none of your systems are quite as old? ;) Oh, Man, Holerith (It's been so long I'm not sure how to spell it anymore)...I learned to type on an IBM keypunch machine punching 80 column cards full of data for some statistical analysis (wrote the analysis proceedures in SPSS, too). Those were the days:-D -- JM -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/556f5aa9.60...@gmail.com
Re: Old Computers
On 06/02/2015 11:45 PM, Marc Shapiro wrote: On 06/02/2015 08:11 PM, Jose Martinez wrote: On 06/02/2015 10:08 PM, Celejar wrote: On Tue, 2 Jun 2015 16:46:17 +0100 Lisi Reisz wrote: On Tuesday 02 June 2015 16:28:30 lostson wrote: On Tue, 2015-06-02 at 16:07 +0100, Lisi Reisz wrote: On Tuesday 02 June 2015 14:55:51 Sven Arvidsson wrote: On Mon, 2015-06-01 at 21:14 -0500, Jose Martinez wrote: Hmm, that is a little disappointing. But, I can probably run Squeeze. Nothing like stone knives and bear skins!:-) I think even squeeze would be a challenge (maybe a fun one though!) when it comes to ram and disk space. But there's always vintage operating systems for vintage computers :) I thought of DSL. But it needs an i486. :-( http://www.damnsmalllinux.org/ http://distrowatch.com/table.php?distribution=damnsmall Lisi How about Tiny Core Linux http://distro.ibiblio.org/tinycorelinux/faq.html#req Needs i486. :-( Ah, nostalgia. I learned linux using BasicLinux, which is still around, and will apparently run on a 386: http://distro.ibiblio.org/baslinux/ http://en.wikipedia.org/wiki/BasicLinux I still remember that incredible feeling, some many years ago, when I put the floppy into a Windows box, rebooted, insmod'd the relevant ethernet driver module, brought the network up, and had an actual working networked *nix terminal ;) Yeah, there's nothing like making an antique useful. I remember the days of the PDP-11 running *nixWhat I wouldn't give to come up with one of those old things!! Lisi Celejar My first programming class, back in 1976 was on a PDP-11. Those were the days. Bootstrap with physical toggle switches on the box to enter the binary code. Marc Boy do I remember those toggle switches!!! A few years back, I built a Z-80 based toy, and that was one of things I wanted t have...Toggle switches and lights on the front panel! Made it work too. -- JM -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/556f59d1.2070...@gmail.com
Re: pendrive permissions
I think your user needs to be in the plugdev group. thanks Sven, users already were in plugdev... looking for I found something like polkit but I didn't solve :-/ Pol -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/556f3fd4.8060...@fuckaround.org
Re: HELP- very slow download speeds
On 05/25/2015 11:16 PM, Petter Adsen wrote: On Mon, 25 May 2015 18:53:42 -0700 Gary Roach wrote: On 05/24/2015 12:49 AM, Petter Adsen wrote: On Sun, 24 May 2015 00:27:02 -0700 Gary Roach wrote: On 05/22/2015 01:19 PM, Bob Proulx wrote: Darac Marjal wrote: Gary Roach wrote: When I start a download, it starts at 50M for the first few seconds and then drops to 500K to 100K range. Finally, don't rule out the possibility that your ISP is throttling you. While you may be synced at 50M and may be able to transfer at that for short periods (and thus, the ISP can rightly claim that you have a 50M connection), they could conceivably throttle your connection in the longer term. I think this is quite the most likely possibility. I have only anecdotal reports from friends but what I hear is that often ISPs allow a full speed burst but then throttle for long term steady state data transfer. That matches your reported behavior exactly. This allows customers to run a speed test and have it report full speed but prevent them from getting that speed for a long download such as a full system upgrade or a large install ISO image download. Are you sure your ISP isn't throttling you? Bob I wouldn't put anything past those jackasses but am still attempting to gather information. Would wireshark be a good tool to do an in depth diagnosis of the problem? I've gotten a little side tracked with another problem but plan to get back to this in the next couple of days. Any comments will be appreciated. If you have shell access to a box somewhere, you can run "iperf" to get an idea of the performance of the link between you. Obviously, the closer to you, the better. Take a look at the "--interval" parameter, so you can see how/if performance degrades over time. "--dualtest" might also be helpful. There are probably guides out there on how to get the best results from it, the man page doesn't really do much except list all the options. There may be better ways, but this is the one I typically use. Wireshark would be more suited to analyze the actual traffic, if you suspect something may be wrong there. Petter Thanks for the tips. Don't go away. As you will find in the newest listings, I have a bigger problem at the moment. I will be back to this one soon. Seen and replied to :) Comment on speed testers. The mostly use UDP packets which will never detect trashed packets. God I hate big business in this country. What ever happened to the antitrust laws I grew up with. iperf will use either TCP or UDP. :) Petter Well, I'm back I used iperf3 as follows: iperf3 -c iperf.scottlinux.com The program just hangs. I also tried it with the -R switch with the same result. I then set up one the other computers on my internal net as a server (iperf3 -s) and got the following results: Connecting to host 192.168.1.12, port 5201 [ 4] local 192.168.1.7 port *50916* connected to 192.168.1.12 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 104 MBytes 875 Mbits/sec0 67.9 KBytes [ 4] 1.00-2.00 sec 105 MBytes 878 Mbits/sec0 67.9 KBytes [ 4] 2.00-3.00 sec 105 MBytes 883 Mbits/sec0 67.9 KBytes [ 4] 3.00-4.00 sec 106 MBytes 892 Mbits/sec0 67.9 KBytes [ 4] 4.00-5.00 sec 104 MBytes 875 Mbits/sec0 67.9 KBytes [ 4] 5.00-6.00 sec 104 MBytes 873 Mbits/sec0 67.9 KBytes [ 4] 6.00-7.00 sec 104 MBytes 875 Mbits/sec0 67.9 KBytes [ 4] 7.00-8.00 sec 104 MBytes 874 Mbits/sec0 67.9 KBytes [ 4] 8.00-9.00 sec 105 MBytes 877 Mbits/sec0 67.9 KBytes [ 4] 9.00-10.00 sec 104 MBytes 874 Mbits/sec0 67.9 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 1.02 GBytes 878 Mbits/sec 0 sender [ 4] 0.00-10.00 sec 1.02 GBytes 877 Mbits/sec receiver iperf Done. My local network seems to be working fine (I tried the -R switch as well. Same good results). Needless to say, I'm using a 100 Mbyte/second network. I am behind a verizon M1424WR rev. I router firewall that has been free of any "known" transmission trouble before. Could the firewall be the problem or has scottlinux.com shut down their iperf3 server. Your comments will be sincerely appreciated. Gary R
Re: How To Activate USB Wifi Adapter
On Wed 03 Jun 2015 at 06:08:09 -0700, Saurav Sarkar wrote: > I am using Debian 8.0 amd64 which is downloaded from your site. > > I want to use EDUP EP-N8513 usb wireless adapter for wireless > networking. > > By lsusb command in terminal i can see that the usb wifi adapter has > been detected but in desktop environment it is not active. Glad you can see it. Pity we are deprived of the information. :) The chipset would probably be displayed too. > Please help me out by replying me how to activate the usb wifi > adapter. The Debian wiki has some good sections on wifi adapters -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/03062015163830.61c9fa082...@desktop.copernicus.demon.co.uk
Re: pendrive permissions
On Wed, 2015-06-03 at 16:20 +0200, Pol Hallen wrote: > Hi all :-) > > I use debian testing with mate desktop. How can I handles pendrive > permissions? When I put in a pendrive, caja (mate window manager) can't > mount it with this error message "unable to mount. Not authorized to > perform operation". > > Where mate handles usb permissions? I think your user needs to be in the plugdev group. -- Cheers, Sven Arvidsson http://www.whiz.se PGP Key ID 6FAB5CD5 signature.asc Description: This is a digitally signed message part
Re: Instructions for upgrading U-boot on Marvell OpenRD "Base" computer?
* Vagrant Cascadian [2015-06-02 13:37]: > There isn't much traction in upstream u-boot on this, and I suspect > u-boot is basically broken on sheevaplug, guruplug and openrd_ultimate > in jessie, stretch and sid... With no activity upstream, I'm hesitant to I booted u-boot from jessie on the SheevaPlug yesterday and it seemed to work fine. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150603151049.gf27...@jirafa.cyrius.com
Re (2): VoIP in jessie
* From: Lisi Reisz 3456789 123456789 123456789 12 Tel +13606390202 http://easthope.ca/peter.html Bcc: peter at easthope. ca -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/E1Z08v3-0003Bo-LZ@dalton.invalid
pendrive permissions
Hi all :-) I use debian testing with mate desktop. How can I handles pendrive permissions? When I put in a pendrive, caja (mate window manager) can't mount it with this error message "unable to mount. Not authorized to perform operation". Where mate handles usb permissions? thanks! Pol -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/556f0d29.1050...@fuckaround.org
Re (2): VoIP in jessie
* From: Ric Moore c:2239:(snd_pcm_open_noupdate) Unknown PCM default:0 ALSA lib conf.c:4705:(snd_config_expand) Unknown parameters 0 ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM default:0 ALSA lib conf.c:4705:(snd_config_expand) Unknown parameters 1 ALSA lib control.c:953:(snd_ctl_open_noupdate) Invalid CTL default:1 ALSA lib conf.c:4705:(snd_config_expand) Unknown parameters 1 ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM default:1 ALSA lib conf.c:4705:(snd_config_expand) Unknown parameters 1 ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM default:1 Segmentation fault peter@dalton:~$ Might help to set the "CTL default" to 1. Will try baresip before more of this. Thanks for the suggestion, ... Peter E. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 12 Tel +13606390202 http://easthope.ca/peter.html Bcc: peter at easthope. ca -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/E1Z08lF-00037T-8f@dalton.invalid
Re: How To Activate USB Wifi Adapter
On Wed, 2015-06-03 at 06:08 -0700, Saurav Sarkar wrote: > Hello, > > I am using Debian 8.0 amd64 which is downloaded from your site. > > I want to use EDUP EP-N8513 usb wireless adapter for wireless networking. > > By lsusb command in terminal i can see that the usb wifi adapter has been > detected but in desktop environment it is not active. > > Please help me out by replying me how to activate the usb wifi adapter. This seems to be a Realtek RTL8188CUS device. So should be supported by the rtl8192cu driver. You need the realtek-firmware package from non-free. -- Cheers, Sven Arvidsson http://www.whiz.se PGP Key ID 6FAB5CD5 signature.asc Description: This is a digitally signed message part
Re: How To Activate USB Wifi Adapter
I want to use EDUP EP-N8513 usb wireless adapter for wireless networking. you have to check which chipset adapter uses and looking for the drivers Pol -- Pol -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/556f0301.9040...@fuckaround.org
How To Activate USB Wifi Adapter
Hello, I am using Debian 8.0 amd64 which is downloaded from your site. I want to use EDUP EP-N8513 usb wireless adapter for wireless networking. By lsusb command in terminal i can see that the usb wifi adapter has been detected but in desktop environment it is not active. Please help me out by replying me how to activate the usb wifi adapter. Regards, Saurav Sarkar +919830668794 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/146889.84117.yahoomailba...@web162704.mail.bf1.yahoo.com
Workaround for making qt4 work with alsa
Hello Debian users, recently I encountered a bug in a qt4 application [1]. With the help of irc user jm_ I found that qt4 doesn't work with alsa [2] (at least on jessie). This is evident when you try to run user@machine:/usr/lib/qt4/demos/qmediaplayer/./qmediaplayer (from qt4-demos), which outputs [08502878] pulse audio output error: PulseAudio server connection failure: Connection refused [08502878] core audio output error: no suitable audio output module I guess I am not the only alsa user being bitten by this, so I wonder if any of you came up with a viable workaround to make qt4 work with alsa again on jessie. [1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=787442 [2] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=740451 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150603131858.ga12...@casa.casa
Re: make oldconfig bzImage with GCC 4.9.2 on debian 8
On Wed, 2015-06-03 at 10:05 +0530, Dhiraj Bhor wrote: > Is there any clue to proceed with this query? No idea. My suggestion was made after googling your problem for a couple of minutes. If this is for a school or uni project, you should really talk to the people in charge and ask them to use a recent kernel that actually builds or provide patches themselves. -- Cheers, Sven Arvidsson http://www.whiz.se PGP Key ID 6FAB5CD5 signature.asc Description: This is a digitally signed message part
Re: Old Computers
On Tue, 2015-06-02 at 19:04 -0500, Jose Martinez wrote: > I see I've sparked a pretty good discussion on the list. I sure > appreciate all the advice/information it will come in very handy when I > actually have the systems in hand. You could always try mining Bitcoin: http://www.righto.com/2015/05/bitcoin-mining-on-55-year-old-ibm-1401.html But I guess none of your systems are quite as old? ;) -- Cheers, Sven Arvidsson http://www.whiz.se PGP Key ID 6FAB5CD5 signature.asc Description: This is a digitally signed message part
Re: VoIP in jessie
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tue, Jun 02, 2015 at 08:15:19PM -0700, pe...@easthope.ca wrote: > > you should first build the re and rem lib debs and then install them ... > > https://www.debian.org/doc/manuals/maint-guide/ , > chapters 4, 5 and 6, help to understand how package building works. > > > ... (including dev packages). then build baresip package and install it. > > I don't understand how a dev package is built. libre-dev for example. > There is no -dev option for dpkg-buildpackage. As far as I understand, the source package itself should "know" that it is supposed to build binary -dev packages, so dpkg-buildpackage will do the right thing. (Dpkg-buildpackage by default generates all binary packages which "come out" of a source package). regards - -- tomás -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.12 (GNU/Linux) iEYEARECAAYFAlVuxS8ACgkQBcgs9XrR2kY2OACfWUHwSPtHAO4q16kDhIPHTkW5 mVMAnitVIKqqpz7af54CwSrEJ9opcAbJ =d209 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150603091319.ga10...@tuxteam.de
Re: Problems with SSD
On Tue, 2 Jun 2015 18:36:43 +0300 Selim T. Erdoğan wrote: > On Fri, May 29, 2015 at 11:18:35AM +0200, Petter Adsen wrote: > > > > This just in: > > [12675.977977] ata5: hard resetting link > > [12680.979063] ata4: softreset failed (1st FIS failed) > > [12680.979080] ata4: hard resetting link > > [12685.976201] ata5: softreset failed (1st FIS failed) > > You could try forcing the drive to a lower speed to see if taxing the > hardware less will avoid triggering the problem. > > Make a file /etc/modprobe.d/local.conf and put the single line > options libata force=1.5G > in it. Reboot. If it works, you can then try with 3.0G instead of > 1.5G. Thanks, I will try that and see if it helps, but it seems a lot like a hardware problem. This motherboard is getting to be a few years old, and has been working fine up until now, it just started behaving like this a few days ago. I'm investigating new motherboards now, since I heavily suspect that is going to be what I'll end up having to do. The drives/controller are not heavily utilized when this happens, the machine is just churning along with low load. I always have gkrellm open, and there is never any hint that utilization has anything to do with this. I will try it, though. Petter -- "I'm ionized" "Are you sure?" "I'm positive." pgp9nMkIqNjO3.pgp Description: OpenPGP digital signature
Re: Problems with SSD
On Tue, 02 Jun 2015 13:46:55 -0400 Gary Dale wrote: > On 30/05/15 02:17 AM, Petter Adsen wrote: > > On Fri, 29 May 2015 13:18:17 -0600 > > Bob Proulx wrote: > > > >> Jochen Spieker wrote: > >>> Petter Adsen: > I'm starting to suspect that it is. Either that, or the > controller on the motherboard, which would be even worse. > >>> Or just the cable (if we are not talking about a laptop). I got > >>> rid of similar errors in the past by replacing the SATA cable. > >> If it were me I would swap cables and move to a different SATA > >> port on the motherboard. I have seen individual SATA ports fail > >> with the rest of the ports okay. I also have the advantage of > >> many different sets of hardware available and so I would mix and > >> match the various parts into different systems. If the problem > >> stays with the system or moves with the moved part is a good > >> diagnostic aid in determining which piece of hardware or software > >> is causing problems. In this case it is 1) the kernel software 2) > >> sata cable 3) sata device 4) motherboard sata controller. At > >> least one of those is the problem. It is a mental game of > >> Mastermind to determine which. > > From what I can understand of the messages above, it seems the > > error messages are coming from two different devices, ata4 and ata5 > > - or am I wrong? To me, that would (unfortunately) indicate the > > controller... > > > > Petter > > > Could potentially be a BIOS setting depending on how the BIOS numbers > its drives. The first 4 drives are usually set the same while the > last 2 can be set differently. Normally the first 4 should be set to > AHCI while the last 2 should be set to the same as the first 4. In my case it's 6 and 2, and all are set to AHCI. Petter -- "I'm ionized" "Are you sure?" "I'm positive." pgpmAqm6VepYq.pgp Description: OpenPGP digital signature