Re: systemd & postgresql - flooding system log

[Václav Ovsík]

On Fri, Jul 14, 2017 at 05:07:22PM -0500, Don Armstrong wrote:
>... 
> This plugin is horribly designed, and runs su - $DBUSER -c [...] for its
> functioning.
> 
> It should instead just su $DBUSER -c [...]; or better yet, not actually
> su to the database user, and instead run as a user which only has the
> ability to read the appropriate tables and cannot also write to.
> 
> If you fix that so that it doesn't start a login session, you'll fix
> the excessive number of sessions created.

Unfortunately removing `-' didn't helped. 


On Sat, Jul 15, 2017 at 12:30:41AM +0200, Michael Biebl wrote:
> Am 15.07.2017 um 00:07 schrieb Don Armstrong:
> > This plugin is horribly designed, and runs su - $DBUSER -c [...] for its
> > functioning.
> 
> Indeed.
> 
> > It should instead just su $DBUSER -c [...]; or better yet, not actually
> > su to the database user, and instead run as a user which only has the
> > ability to read the appropriate tables and cannot also write to.
> 
> There is an alternative utility called runuser which is more suitable
> for such cases.
> It uses a different pam config and doesn't start a systemd logind session.

Bingo! This helped runuser instead of su.

 su - $DBUSER -c [...] 
to
 runuser -c [...] $DBUSER

Thanks
-- 
Zito

Re: Laptop hangs after wake up in stretch

[Cindy-Sue Causey]

On 7/14/17, Darac Marjal  wrote:
> On Fri, Jul 14, 2017 at 01:42:01AM +0200, Tobias Bengfort wrote:
>>
>>since updating to stretch I have a weird issue with my Lenovo X201
>>laptop: Sometimes when waking up from suspend it "hangs". The symptoms
>>are somewhat strange:
>>
>>- All open programs still work fine.
>>- I can open a new tab inside of an existing terminal. The bash prompt
>>appears just fine.
>>- Any process I try to start hangs.
>>- The CPU monitor in lxpanel shows 100% usage.
>>
>>I was not yet able to reliably reproduce the issue. I feel that it often
>>happens after suspending on battery power.
>>
>>Has anyone ever experienced something similar? Any pointers as to where
>>I should look for clues?
>
> On the face of it, this sounds like an inaccessible file system. You can
> open new tabs and re-launch processes because (in the case of launching
> a new tab) the information is still in memory or (in the case of
> launching a new process using a previously-run program, such as bash),
> the file is available from the disk cache. You can't access new programs
> because that would involve pulling information from the disk, which you
> can't get to.
>
> That might be something to look into. Be aware that, if your disk is
> inaccessible, then logs might not be being written out either.


On the flipside, it will be my immediate open [program] that won't
work. Well, the program AND the keyboard. I think someone MIGHT have
mentioned that recently... or not? Maybe it was me trying to chime in
and then "ran out of words" again

I accidentally stumbled on a fix in my case. Click anything in the top
toolbar so that something else takes priority in the screen. Click
back to whatever was opened previously, and the keyboard is back to
working 100% as expected.

Normally I can at least guess at what might be going on under the
hood, but that one is a little different right there.

As of about 12 hours ago, I have been blessed to be able to be back
working on a desktop PC. The hang thing hasn't happened once yet after
MANY suspends so I'm back to my old mantra that some combination of
battery power AND memory usage is in play in at least some of these
kinds of instances

Although... yes, absolutely and indeed.

*Or not.* :)

As I proofread that before clicking "Send", the same thought occurs to
me that always does. Maybe there's some way to monitor what's going
on... and then "teach" Debian to come back up for air in small,
logical increments rather than all at once

Or something like that there.

Yeah, that might end up being a nanosecond slower than normal but
that nanosecond slower is a whole lot better than the kind of
"lockdowns" that some of us regularly experience..

Just thinking out loud again from ye ol' Pickens County.. :)

Cindy :)

-- 
Cindy-Sue Causey
Talking Rock, Pickens County, Georgia, USA

* runs with duct tape... and a desktop PC with a Debian Buster copy
initially debootstrap'ed on an ASUS netbook'y type laptop *

Re: problème avec digikam

[geonpi]

On 11/07/2017 11:21, maderios wrote:

On 07/11/2017 10:27 AM, maderios wrote:

On 07/11/2017 09:31 AM, geonpi wrote:



On 10/07/2017 21:29, maderios wrote:

On 07/10/2017 09:11 PM, geonpi wrote:

On 2017-07-10 20:22, geonpi wrote:

Bonjour,

je viens de faire une dist-upgrade de Jessie vers Stretch et tout
c'est bien passé.

Par contre j'ai un soucis avec digikam, j'ai essayé de le reinstall,
purge puis install, j'ai aussi fais un "apt-get build-dep" mais j'ai
toujours le même message d'erreur:

"$ digikam
digikam: symbol lookup error:
/usr/lib/digikam/libdigikamcore.so.5.3.0: undefined symbol:
_ZN5Exiv213XmpProperties10registerNsERKNSt7__cxx1112basic_stringIcSt11char_traitsIcESaIcEEES8_ 


"

et là ça dépasse mes compténces.

Ps: je dois faire un rapport de bug à la Debian team?



Aucun bug avec digikam 5.3


Il y a une appimage dispo sur le site officiel. Cependant le 
paquet du depot Stretch ne fonctionne pas.




Bonjour
Le paquet digikam (5.3) de stretch fonctionne parfaitement, c'est 
d'ailleurs le même que celui de jessie.

Pour mettre à jour debian:
apt-get update && apt-get dist-upgrade

Bonjour, chez moi ça ne fonctionne pas, voir le message d'erreur 
plus haut ;)


bonne journée



Dans ce cas, il faut supprimer et purger tous les paquets digikam.
Supprimer également *tous* les fichiers de conf digikam dans le 
répertoire perso.


Je crois me souvenir que digikam-5.x, celui de stretch, n'est pas 
compatible avec la conf de la précédente version 4.x.


Ah ça vient peut-être de là. Pourtant j'ai fais un purge et autoremove. 
Bref avec l'appimage ça me convient ;)

merci

Re: Choisir un outil de sauvegarde, et utilité du compte système "backup"

[G2PC]

Le 15/07/2017 à 22:31, Thierry Bugier Pineau a écrit :
> Bonjour
>
> Je veux mettre en place un système de sauvegarde adapté à mon
> infrastructure personnelle, et préparer la création de mon système de
> messagerie (avoir une sauvegarde est un pré requis).
>
> J'ai:
> - 2 serveurs sous Proxmox VE (un perso, un dédié)
> - quelques machines perso.
>
> Les Proxmox contiennent des VM à sauvegarder. Je compte simplemetn
> configurer Proxmox pour sauvegarder les VM localement et copier les
> sauvegardes sur un stockage distant, accessible par SFTP.
>
> J'ai repéré dans Debian l'existence d'un compte utilisateur "backup",
> appartenant au groupe "backup". Je ne trouve pas d'information la
> raison d'être de ce compte (au delà du nom explicite), ni de bonne
> pratique d'utilisation. Quelqu'un ici saurait m'expliquer comment s'en
> servir ?
>
> J'ai recherché les différentes solutions de sauvegarde possibles. Il
> faut qu'elle supporte la sauvegarde vers un stockage distant, ou depuis
> un stockage distant (tout dépend d'où le logiciel va s'exécuter). Le
> support d'un snapshot LVM est un plus, pour la cohérence de la
> sauvegarde.
>
> J'ai une petite expérience avec rsnapshot, j'ai utilisé il y a
> longtemps backuppc sur plusieurs réseaux de postes de travail. Je pense
> me tourner vers rdiff-backup. Avant d'arrêter mon choix, je voudrais
> solliciter les avis et retours d'expérience parmi vous. 
>
> D'avance merci.
>
Bonsoir, je ne suis pas expert en sauvegarde, certains ici ont plus de
savoir faire.
J'utilise grsync , ou, je préfère actuellement Deja Dup qui me permet de
sauvegarder mon /home en GUI.
https://www.visionduweb.eu/wiki/index.php?title=Sauvegarder_et_reinstaller_Linux_Mint_Sarah#Sauvegarder_le_.2Fhome_de_votre_utilisateur_avec_Deja_Dup

Par contre, pour sauvegarder le système entièrement pour le réinstaller
en un clic, je n'ai pas encore trouvé l'outil qui me correspond, facile,
et, efficace. Redobackup est un bon choix, mais, lorsque je le lance, il
ne voit pas mon disque SSD.

Re: Navigateur par défaut de Debian Stretch - Impossible à lancer

[G2PC]

Le 15/07/2017 à 09:51, Thierry Bugier Pineau a écrit :
> Bonjour
>
> Je pense que ce problème dépend de comment a été installé
> l'environnement graphique.
>
> Il y a des paquets task-xfce4-desktop (ou quelque chose comme ça), un
> par environnement graphique. Ces paquets installent plein de logiciels
> dont un navigateur.
>
> Si on passe par un autre moyen, en sélectionnant plus finement ses
> paquets (xserver-org, lightdm, xfce4) on peut se retrouver avec pour
> seuls logiciels ceux de l'environnement graphique. Pas de libreoffice
> ni Firefox par exemple.
>
>
>
> Le 14 juillet 2017 18:27:36 GMT+02:00, G2PC  a
> écrit :
>
>
>
> Le 14/07/2017 à 17:36, Thierry Bugier Pineau a écrit :
>> Bonjour
>>
>> La question peut paraitre stupide mais avant d'installer Firefox
>> ESR y avait il un navigateur installé ?
>>
>> Il me semble que ça m'est déjà arrivé et que le problème était
>> simplement là : je n'avais aucun navigateur.
>>
>> Le 14 juillet 2017 15:00:12 GMT+02:00, G2PC
>>  a écrit :
>>
>> Impossible de lancer le navigateur Web par défaut.
>> Erreur d'entrée/sortie.
>>
>> Sur une machine virtuelle VirtualBox, toute neuve, sans
>> installation supplémentaire, installée avec Debian Stretch
>> i386 netinstall.
>>
>> deb http://deb.debian.org/debian/ stable main contrib non-free
>> deb-src http://deb.debian.org/debian/ stable main contrib
>> non-free
>> deb http://deb.debian.org/debian/ stable-updates main contrib
>> non-free
>> deb-src http://deb.debian.org/debian/ stable-updates main
>> contrib non-free
>> deb http://deb.debian.org/debian-security stable/updates main
>> deb-src http://deb.debian.org/debian-security stable/updates
>> main
>> deb http://ftp.debian.org/debian stretch-backports main
>> deb-src http://ftp.debian.org/debian stretch-backports main
>>
>> Pour récupérer un navigateur, j'ai installé firefox-esr
>>
>> Le raccourci du navigateur se lance maintenant correctement,
>> avec Firefox.
>>
>> Est ce qu'il est normal que le navigateur par défaut ne se
>> lance pas, avec une erreur entrée/sortie, je suppose que non.
>>
>>
>> -- 
>> Envoyé de mon appareil Android avec Courriel K-9 Mail. Veuillez
>> excuser ma brièveté. 
>
> Bonjour, ce n'est pas une question stupide, j'ai pensé comme toi,
> qu'il me fallait installer un navigateur au choix.
> Je suis juste étonné de ne pas voir de navigateur par défaut, sur
> une Debian 9.
>
>
> -- 
> Envoyé de mon appareil Android avec Courriel K-9 Mail. Veuillez
> excuser ma brièveté. 

Oui, écoute, c'est vraiment étonnant, j'ai réinstallé un copie light, de
Debian Stretch, sur 20Go, l'autre machine virtuelle étant sur 150Go.
Cette nouvelle installation m'a bien demandé si je voulais installer
l'environnement de bureau, serveur d'impression, serveur web .. Je
n'ai pas du tout souvenir d'avoir vu cette demande, lors de ma première
installation, sur le disque de 150Go.

Résultat, sur mon disque de 150Go, j'avais bien un linux minimaliste,
avec lequel j'ai installé manuellement xfce4 pour obtenir un bureau
graphique.

Sur la machine virtuelle de test de 20Go, qui devrait être montée
pareil, finalement, c'est lors de l'installation que j'ai choisi d'avoir
xfce4 et le service d'impression ( ... ) Dans ce cas, j'ai bien pu
lancer un navigateur installé par défaut.

En fait, je ne comprend pas, comment ais je pu louper cette
configuration la première fois.
J'ai en tout cas compris que sur une Debian minimaliste, on a pas
forcément de navigateur installer.
Un petit sudo apt-get install firefox-esr suffit pour récupérer un
navigateur et faire fonctionner le raccourci par défaut de XFCE. ( En
bas de l'écran. )

Résolu.

Re: addons invités virtualbox

[G2PC]

Le 15/07/2017 à 07:38, Manu Baylac a écrit :
> Bonjour,
>
>
> Le 14/07/2017 à 22:20, G2PC a écrit :
>
>> Je me demande tout de même, si je suis sur mon hôte Linux Mint, est ce
>> que ajouter le deb http:// de stretch est une bonne chose ?
>
> Rah désolé, je n'avais pas vu dans un précédent mail que le host était
> sous Mint, donc je vous ai donné un mauvais conseil et vous avez bien
> fait de poser la question avant de vous lancer !
>
> On voit sur https://www.virtualbox.org/wiki/Linux_Downloads qu'il y a
> des fichiers deb pour Ubuntu, et Mint étant basé sur Ubuntu, il faut
> voir sur quelle version d'Ubuntu est basée votre version de Mint, puis
> suivre la procédure décrite dans le lien que j'ai mentionné pour
> renseigner le bon dépôt (avec le nom de la version Ubuntu).
>
> Pour l'installation, j'ai préféré personnellement sauvegarder mes vms,
> désinstaller le paquet debian/ jessie qui tournait sur ma bécane,
> installer virtualbox avec les dépôts officiels, puis restauration de
> mes vms. Je n'ai pas pris le temps de regarder les scripts de
> (pré/post) configuration du paquet car j'étais "pressé", mais je pense
> qu'un upgrade (sans désinstaller votre paquet actuel) devrait marcher.
> Mais je ne sais pas comment vous l'aviez installé, le paquet de votre
> distribution ou suivant votre procédure décrite dans vos précédents
> mails. Mélanger les méthode n'est pas la meilleure chose et
> potentiellement "mettre la pagaille".
>
> Perso, quand on est pas sur à 100% de son coup, sauvegarde (des vms)
> avant histoire d'être serein :-)
>
> -- 
> Manu
Salut Manu, merci pour ta réponse.
J'ai tenté mon bricolage. Supprimé Virtualbox et tenté de mettre le
nouveau en 5.1 mais il ne passe pas, de mémoire, ça bloque, en me disant
que certains paquets ne sont pas disponibles, car, pas encore sortit de
testing.
A savoir que je suis en mode : ne pas casser mon ordinateur, pour les
paquets et les mises à jour.
Je suppose donc que je suis dépendant des mises à jour de Mint.
Je vais devoir me contenter du partage de fichier, avec mon invité
Debian Stretch, en 1024x768.

Re: moderncv class does not compile in Debian Stretch

[deloptes]

Andrea Neroni wrote:

> Now, to my questions. Why is Xelatex now required, what changed in the
> class?
> 
> How can I solve the latter error? I believe it could be a bug in the
> moderncv class, should I report it to package maintainers?

Something I learned about latex - never touch a running system!

better put all of this in a change rooted environment and never touch it.
everything else leads to hours of configuring and testing the results.

Re: interesting: Linux on Android

[deloptes]

Dan Ritter wrote:

> 
> Not yet a Debian on Android, but:
> 
> https://ollieparanoid.github.io/post/50-days-of-postmarketOS/
> 
> summarizes the first 50 days of building Linux directly for
> several smartphones, with the intention of eventually getting
> them fully functional. Their work could lead to a Debian
> flavor/spin/whatever it's called now.
> 
> Personally, I would be pretty happy to run Debian on a phone
> instead of the giant pile of Java sitting on an old kernel that
> currently constitutes Android.
> 
> -dsr-

I've been and I am still pretty lucky to own and use one Nokia N9 and last
year got Intex AquaFish. The former is amazing device based on MeeGo, the
latter working just great with newer SailFish!

For now the only really usable substitute to iOS and Android out there.
Support Jolla and their community and pray they manage a break through. I
am just a fan of Jolla, not an employe or in whatever way connected to
them. I am following this through the years and it is like David against
Golliat. For now Golliat wins, but David is still not defeated completely.

If someone wants to help build a real FSOS for a phone, join and support
their community. Don't waste your time for nothing. What for would I use
debian on my phone exactly? What desktop environment is suitable on a
phone? Where are the drivers for the hardware?

I've seen such enthusiasts in the past ... what happened to all promised OSs
for smart phones? Dead.

If someone knows how to build OS for a smart phone this should be Nokia or
better ex-Nokia and they really deliver ... still things to improve, but
not just promises and shiny photos of useless stuff, hobby-hacking and
waste of time. What is exactly the benefit?

Do not understand me wrong, I wish those guys luck ... but I doubt it will
bring something.

regards

Choisir un outil de sauvegarde, et utilité du compte système "backup"

[Thierry Bugier Pineau]

Bonjour

Je veux mettre en place un système de sauvegarde adapté à mon
infrastructure personnelle, et préparer la création de mon système de
messagerie (avoir une sauvegarde est un pré requis).

J'ai:
- 2 serveurs sous Proxmox VE (un perso, un dédié)
- quelques machines perso.

Les Proxmox contiennent des VM à sauvegarder. Je compte simplemetn
configurer Proxmox pour sauvegarder les VM localement et copier les
sauvegardes sur un stockage distant, accessible par SFTP.

J'ai repéré dans Debian l'existence d'un compte utilisateur "backup",
appartenant au groupe "backup". Je ne trouve pas d'information la
raison d'être de ce compte (au delà du nom explicite), ni de bonne
pratique d'utilisation. Quelqu'un ici saurait m'expliquer comment s'en
servir ?

J'ai recherché les différentes solutions de sauvegarde possibles. Il
faut qu'elle supporte la sauvegarde vers un stockage distant, ou depuis
un stockage distant (tout dépend d'où le logiciel va s'exécuter). Le
support d'un snapshot LVM est un plus, pour la cohérence de la
sauvegarde.

J'ai une petite expérience avec rsnapshot, j'ai utilisé il y a
longtemps backuppc sur plusieurs réseaux de postes de travail. Je pense
me tourner vers rdiff-backup. Avant d'arrêter mon choix, je voudrais
solliciter les avis et retours d'expérience parmi vous. 

D'avance merci.

fontconfig in stable en testing

[Sjoerd Hiemstra]

Stable heeft fontconfig versie 2.11.
Wanneer je 'dpkg-reconfigure fontconfig-config' uitvoert, dan is dit de
eerste vraag:

--
Please select the preferred method for tuning fonts for screen
rendering.

Select 'Native' if you mostly use DejaVu (the default in Debian) or any
of the Microsoft fonts. Select 'Autohinter' if you mostly use other
TrueType fonts. Select 'None' if you want blurry text.

Font tuning method for screen (system default):
Native
Autohinter
None
--

Kies ik voor 'Autohinter' of 'None', dan zien veel fonts er erg vettig
uit, niet fraai om aan te zien. Gelukkig is daar 'Native', daardoor
ogen de fonts een stuk beter.

Wat ik me nu dus ten eerste afvraag, is of dit anderen ook opvalt.


Testing heeft fontconfig 2.12.
Er is het een en ander veranderd. Voer je hier 'dpkg-reconfigure
fontconfig-config' uit, dan zie je een nieuwe vraag, die niet bij 2.11
voorkwam:

--
Please select the preferred automatic font hinting style to be used
as the system default.

The hinting style is the amount of font reshaping done to line up to
the grid. "Slight" will make the font more fuzzy to line up to the grid
but  will be better in retaining font shape, while "Full" will be a
crisp font that aligns well to the pixel grid but will lose a greater
amount of font shape. "Slight" is the default setting.

To revert to the pre-2.12 behavior, select "Full".

Automatic font hinting style:
None
Slight
Medium
Full   
--

Punt is nu dat de fonts er altijd extra vettig uitzien, ook als ik op
de eerste vraag 'Native' antwoord, om het even welke 'hinting style' ik
selecteer.

Wat ik me dus afvraag, is of het mogelijk is om de fonts er in testing
weer net zo te laten uitzien als in stable.
Ik heb geprobeerd fontconfig te downgraden van 2.12 naar 2.11.
Alleen fontconfig was geen probleem, maar het was blijkbaar niet
genoeg: ook fontconfig-config, libfontconfig1 en libfontconfig1:i386
moeten gedowngrade worden van 2.12 naar 2.11. En als ik dat probeer,
dan wil apt zowat mijn halve systeem deïnstalleren. En aptitude ook.

Misschien dat iemand een mogelijkheid ziet om de fonts er, net als
voorheen, niet zo 'zwaar' uit te laten zien? Misschien zie ik iets
eenvoudigs over het hoofd?

A Fantástica Arte de Vender - E-book Gratuito!

[Jeremias Oberherr]

www.jeremiasoberherr.com.br 
 versão web
[http://www.quantico.digital/news/2/index.php/mymail/51/0e57fb2acbba5d43f849913d3f3d318e/aHR0cDovL3d3dy5xdWFudGljby5kaWdpdGFsL25ld3MvamVyZW1pYXMvbmV3c2xldHRlci9hLWZhbnRhc3RpY2EtYXJ0ZS1kZS12ZW5kZXItZS1ib29rLWdyYXR1aXRvLw]
| descadastrar 
[http://www.quantico.digital/news/2/index.php/mymail/51/0e57fb2acbba5d43f849913d3f3d318e/aHR0cDovL3d3dy5xdWFudGljby5kaWdpdGFsL25ld3MvamVyZW1pYXMvZGVzY2FkYXN0cmFy]
 | Atualizar Perfil
[http://www.quantico.digital/news/2/index.php/mymail/51/0e57fb2acbba5d43f849913d3f3d318e/aHR0cDovL3d3dy5xdWFudGljby5kaWdpdGFsL25ld3MvamVyZW1pYXMvcGVyZmls]
 

 

 [Jeremias Oberherr] 
[http://www.quantico.digital/news/2/index.php/mymail/51/0e57fb2acbba5d43f849913d3f3d318e/aHR0cDovL3d3dy5qZXJlbWlhc29iZXJoZXJyLmNvbS5icg]
 

A Fantástica Arte de Vender - E-book Gratuito! 

 

 [ebook] 
[http://www.quantico.digital/news/2/index.php/mymail/51/0e57fb2acbba5d43f849913d3f3d318e/aHR0cDovL2FmYW50YXN0aWNhYXJ0ZWRldmVuZGVyLmNvbS5ici9lYm9vay8]
 

 

ESSES E MUITOS OUTROS DESTAQUES ESTãO DISPONíVEIS EM NOSSO SITE.

 

 

Você esta recebendo esse e-mail por estar inscrito na Jeremias Oberherr
[http://www.quantico.digital/news/2/index.php/mymail/51/0e57fb2acbba5d43f849913d3f3d318e/aHR0cDovL3d3dy5qZXJlbWlhc29iZXJoZXJyLmNvbS5icg/1]
 com a conta contato@quantico.digital. Caso não deseje mais
receber nossas novidades clique: descadastrar
[http://www.quantico.digital/news/2/index.php/mymail/51/0e57fb2acbba5d43f849913d3f3d318e/aHR0cDovL3d3dy5xdWFudGljby5kaWdpdGFsL25ld3MvamVyZW1pYXMvZGVzY2FkYXN0cmFy/1]
 
 Jeremias Oberherr 
[http://www.quantico.digital/news/2/index.php/mymail/51/0e57fb2acbba5d43f849913d3f3d318e/aHR0cDovL3d3dy5qZXJlbWlhc29iZXJoZXJyLmNvbS5icg/2]
 © 2017, Todos os direitos Reservados. 

 [facebook] 
[http://www.quantico.digital/news/2/index.php/mymail/51/0e57fb2acbba5d43f849913d3f3d318e/aHR0cHM6Ly9mYWNlYm9vay5jb20vamVyZW1pYXNvYmVyaGVycm9maWNpYWw]
 

 

Re: Gateway disappears on IPv6

[Guus Sliepen]

On Sat, Jul 15, 2017 at 07:31:29PM +0200, Rainer Dorsch wrote:

> > I added a IPv6 support to a KVM virtualized Jessie system following the
> > instructions by the hoster
> > 
> > https://www.netcup-wiki.de/wiki/Zus
> > %c3%a4tzliche_IP_Adresse_konfigurieren#IPv6%7C

That should still work, but I see it uses the ancient interface alias
notation (like eth0:1). The example given there can be rewritten to a
more modern form:

allow-hotplug eth0
iface eth0 inet static
address 37.100.195.4/22
gateway 37.100.192.1

iface eth0 inet static
address 46.38.240.15

iface eth0 inet6 static
address 2a03:4000:2:11c5::1/64
gateway fe80::1

Note that the netmasks and broadcast addresses are gone, and you can
have multiple inet stanzas for the same interface.

> > root@netcup:~# /sbin/route -6
> > Kernel IPv6 routing table
> > DestinationNext Hop   Flag  Met  Ref 
> > Use If
[...]
> > ::/0   fe80::1UGDAe 1024 3   0  
> >  eth0

The flags field contains the letter 'e', which means that this route
expires. This is added by the kernel, most likely because the gateway
address is not inside 2a03:4000:2:11c5::/64, and will cause it to remove
the route after a while. This looks like the same issue reported in
Debian bug #378506, which is fixed in stretch.

The workaround is to remove the gateway fe80::1 statement, but to add
this instead:

up ip -6 route add default via fe80::1 dev $IFACE onlink

-- 
Met vriendelijke groet / with kind regards,
  Guus Sliepen 


signature.asc
Description: PGP signature

Re: Touchpad no funciona en notebook debian 9

[Marioca]

Verifico con dpkg y veo que lo tengo instalado
# dpkg -l | grep xserver-xorg-input-synaptics
ii  xserver-xorg-input-synaptics
1.9.0-1+b1   i386 Synaptics TouchPad driver
for X.Org server

Creo que otra seria el percance



El 15 de julio de 2017, 10:40, Germán Avendaño Ramírez <
gdavenda...@autistici.org> escribió:

> El 15/07/17 a las 08:38, Marioca escribió:
> > Buenas lista, he agotado instancias por eso la solicitud de soporte por
> > aquí con uds, he actualizado el SO de mi notebook a stretch 9, cuando
> > voy a la parte de Todas las Configuraciones ==>> Ratón y Touchpad la
> > misma no me muestra la opción de touchpad como muestran en los soportes
> > y ayuda, es como si el SO no detecta el equipo como notebook o portatil
> > y por ende no puedo configurar el touch y el hábito y comodidad del uso
> > del mismo se hace tedioso. Si a algunos de uds le ha pasado lo mismo
> > favor indicarme la solución ya que en otras versiones lo he configurado
> > sin problemas
> >
> > Desde ya muchas gracias
> >
> >
> > --
> > Per quanto riguarda
> > Marioca
>
> Debe cerciorarse de tener instalado el paquete xserver-xorg-input-synaptics
>
> Si no lo tiene instalado, debe instalarlo y reiniciar el sistema gráfico
> o reiniciar el sistema.
>
> --
> Germán Avendaño Ramírez
> Lic. Mat. U.D., M.Sc. U.N.
> Email: german_...@autistici.org
> GNU/Linux user # 531535
> Sent from Debian 9 GNU/Linux
>
>


-- 
Per quanto riguarda
Marioca

Re: Xfce Power Management Problem in Sketch

[Ralph Katz]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512

On 07/15/2017 04:35 AM, Stephen P. Molnar wrote:
> I have just upgraded by Linux platform to v-9.0.0 from v-8.8.0.
> 
> Xfce Power Management fails to blank the display.
> 
> I have not been able to find a solution and would appreciate some
> assistance.
> 
> Thanks in advance.
> 

During the upgrade, light-locker package is installed as a depends.  I
had to purge xscreensaver to get the locking/blanking capability
previously available prior to the upgrade.

XFCE Menu -> settings -> power manager -> Display tab  to manage "Blank
after" settings.

Good luck!

Ralph



-BEGIN PGP SIGNATURE-
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
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=LTZL
-END PGP SIGNATURE-

Re: Laptop hangs after wake up in stretch

[Tobias Bengfort]

On 14/07/17 10:15, Darac Marjal wrote:
> On the face of it, this sounds like an inaccessible file system. You can
> open new tabs and re-launch processes because (in the case of launching
> a new tab) the information is still in memory or (in the case of
> launching a new process using a previously-run program, such as bash),
> the file is available from the disk cache. You can't access new programs
> because that would involve pulling information from the disk, which you
> can't get to.

Thanks for the explanation. That sounds very reasonable. Unfortunately,
I did not find any relevant warnings/errors in the kernel logs.

What should be my next steps? I don't even know which system component I
would file a bug on: The kernel? Or systemd? Or some application that
hogs the file system?

tobias

moderncv class does not compile in Debian Stretch

[Andrea Neroni]

Hello everybody,
I used to have a personal cv written using the moderncv class from the package 
texlive-latex-extra,
compiled using pdflatex. After upgrading to Stretch it seems that moderncv 
class is using
/usr/share/texlive/texmf-dist/tex/latex/fontawesome/fontawesome.sty

that in turn uses
/usr/share/texlive/texmf-dist/tex/latex/fontspec/fontspec.sty

that can only be compiled in XeLateX or LuaLatex. Fine.
Installed texlive-xetex and compiled using xelatex. This error now pops up

LaTeX Warning: You have requested package `moderncvheadiii',
   but the package provides `moderncvheadiii'.

) (/usr/share/texlive/texmf-dist/tex/latex/moderncv/moderncvbodyiii.sty

LaTeX Warning: You have requested package `moderncvbodyiii',
   but the package provides `moderncvbodyiii'.

! Undefined control sequence.
 \tiny \faCircleO 


Now, to my questions. Why is Xelatex now required, what changed in the class?

How can I solve the latter error? I believe it could be a bug in the moderncv 
class,
should I report it to package maintainers?


Thanks in advance to anybody answering!


Andrea

Re: Bonding not using all 3 interfaces?

[Sven Hartge]

Florius  wrote:

> I'm setting up a Ceph storage with Proxmox 5.0 beta, based on Debian
> Stretch.  It's based on 3 Dell PowerEdge R610's, bonded with 3 NIC's.
> (I'll get back on this in a bit), all 3 with PERC H700 and RAID1
> Kingston SSD.  Writing speeds directly on the SSD give me roughly
> 300MB/s (which is still slow, as it should reach 500MB/s).  The switch
> they are connected to is a HP PowerConnect 2824

> The issue I'm having is that when I test my storage speeds I'm only
> getting 80MB/s via Ceph.  If testing directly with netperf I'm getting
> 112MB/s. (I followed the following guide for testing:
> https://blog.codecentric.de/en/2014/03/ceph-object-storage-fast-gets-benchmarking-ceph/)
>  

> Anyone that might have a clue what I'm doing wrong/what is wrong with 
> the setup?

802.3ad or LACP does *not* round-rob the packages across the individual
links nor does it any kind of load-balancing based on traffic. The
distribution is static and deterministic, based on the hashing policy
you select on both the server and the switch. But any one data flow can
only ever run over one NIC and one NIC alone, which is why your netperf
tests caps at 112MB/s.

The normal hashing function for a layer2-based approach is like this:

  (src-MAC XOR dst-MAC) modulo numer-of-NICs-in-bond

You selected a hash policy consisting of layer3 (IP) and layer4 (TCP/UDP
Port) on your servers, which will cover the outgoing packages but I
don't see you configuring the same policy on the switch.

The default configuration for most switches is to use a hash based on
layer2 (MAC address).

This means if you are really unlucky and depending on the MAC addresses
of you servers, the hashing might put every packet on the same NIC.

How to improve this:

a) Select a hash policy which involves the IP. You already did this for
   the bond interface on the servers, you also have to do this on the
   switch.

b) Make sure to use consecutive IPs for the CEPH bond. For example:
   server1 gets x.x.x.11, server2 x.x.x.12 and server3 x.x.x.13
   This way you make sure not all packages between servers are put on
   the same NIC (or NICs).

Grüße,
Sven.

-- 
Sigmentation fault. Core dumped.

Re: jesse->stretch for DYMO label printer

[Brian]

On Fri 14 Jul 2017 at 16:40:09 -0400, Gene Heskett wrote:

> On Friday 14 July 2017 16:13:14 Brian wrote:
> 
> > On Fri 14 Jul 2017 at 15:36:40 -0400, Gene Heskett wrote:
> > > On Friday 14 July 2017 13:09:00 Ionel Mugurel Ciobîcă wrote:
> > > > What is "a printer dialog"? What application? I have an alias
> > > > "label" that does "lpr -P label -o orientation-requested=5", and I
> > > > print like this:
> > >
> > > This is a case I believe, of the default text size, where-ever its
> > > set, and which I do not know.
> >
> > Default text size and font for text files is feature of cups-filters.
> >
> > > But what I would try is editing your alias to read:
> > >
> > > lpr -P label -o orientation-requested=5 -o cpi=10
> > >
> > > See the manpage for lpr for the nitty-gritty,  but you should be
> > > able to adjust it for the result you need.  I believe also that you
> > > can control the font used, in which case I'd install "hack" which is
> > > a mono-spaced font and will not only look good, but will be a
> > > consistent character width.
> > >
> > > And adjust the 10 up and down until it fits. For multiline output,
> > > there used to be a way to adjust the default 6 lines per inch,
> > > allowing the text to be compressed vertically.
> > >
> > > However for that fine a vertical control, you might have to use lp
> > > instead of lpr.
> >
> > lp versus lpr. One does more than the other? How different are they?
> > A specific example would go a long way to substantiating your
> > assertion.
> >
> > My view is that both commands do the same thing.
> >
> > > lp has the -o lpi=option, but I do not see either cpi or lpi listed
> > > as options in the current (for wheezy) lpr man page.
> >
> > Not everything is in a man page.
> >
> > http://localhost:631/help/options.html?TOPIC=Getting+Started=
> 
> From the looks of that, essentially the only diff is in how SOME of the 
> options are defined and applied.
> 
> Educational reading for everyone here who uses a printer, thank you 
> Brian.

Educational only if are printing text files. Most people print from Qt
and GTK applications, so the file sent to cups is either PostScript or
PDF. Your -o cpi=10 added to lp(r) is worth a try. It is a CUPS thing
and could give acceptable output.

The root problem likely lies with the texttopdf filter of cups-filters.
(which is a topic on the Printing section of the wiki). texttopdf uses
fontconfig to choose a monospaced font for printing a text file and the
way it goes about it has changed. On an A4 page it would probably go
unnoticed but on a label it doesn't. The trick is in getting texttopdf
to use the font you want.

-- 
Brian.

Bonding not using all 3 interfaces?

[Florius]

Hello,

I'm setting up a Ceph storage with Proxmox 5.0 beta, based on Debian 
Stretch.
It's based on 3 Dell PowerEdge R610's, bonded with 3 NIC's. (I'll get 
back on this in a bit), all 3 with PERC H700 and RAID1 Kingston SSD.
Writing speeds directly on the SSD give me roughly 300MB/s (which is 
still slow, as it should reach 500MB/s).

The switch they are connected to is a HP PowerConnect 2824

The issue I'm having is that when I test my storage speeds I'm only 
getting 80MB/s via Ceph.
If testing directly with netperf I'm getting 112MB/s. (I followed the 
following guide for testing: 
https://blog.codecentric.de/en/2014/03/ceph-object-storage-fast-gets-benchmarking-ceph/) 

I have setup bonding, exactly the same on all 3 nodes. All configs can 
be found below.
I tried using 'mtu 9000' in the config, but then I got packet loss and 
total connection loss. Unkown what's causing it but I disabled it again.


Anyone that might have a clue what I'm doing wrong/what is wrong with 
the setup?


Note: Current setup will be for testing only, once everything is 
succesfull we will invest in 10G NIC's.

===

root@kvm-01:~# cat /etc/network/interfaces
auto lo
iface lo inet loopback

iface eno1 inet manual

iface eno2 inet manual

iface eno3 inet manual

iface eno4 inet manual

auto bond1
iface bond1 inet manual
slaves eno2 eno3 eno4
bond_miimon 100
bond_mode 802.3ad
bond_lacp_rate 1
bond_xmit_hash_policy layer3+4

auto bond0
iface bond0 inet manual
slaves eno1
bond_miimon 100
bond_mode 802.3ad
bond_lacp_rate 1
bond_xmit_hash_policy layer3+4

auto vmbr0
iface vmbr0 inet static
address  X.X.X.X
netmask  255.255.255.240
gateway  X.X.X.X
bridge_ports bond0
bridge_stp off
bridge_fd 0

auto vmbr1
iface vmbr1 inet static
address  10.0.0.2
netmask  255.255.255.0
bridge_ports bond1
bridge_stp off
bridge_fd 0

===

Switch configuration:

# sh run

Running configuration:

; J4903A Configuration Editor; Created on release #I.08.98


interface 2
   no lacp
exit
interface 3
   no lacp
exit
interface 4
   no lacp
exit
interface 6
   no lacp
exit
interface 7
   no lacp
exit
interface 8
   no lacp
exit
interface 10
   no lacp
exit
interface 11
   no lacp
exit
interface 12
   no lacp
exit
trunk 2-4 Trk1 LACP
trunk 10-12 Trk2 LACP
trunk 6-8 Trk3 LACP
snmp-server community "public" Unrestricted
vlan 1
   name "DEFAULT_VLAN"
   untagged 16-17,23-24
   ip address dhcp-bootp
   no untagged 1,5,9,13-15,18-22,Trk1-Trk3
   exit
vlan 40
   name "OOB"
   untagged 21,Trk1-Trk3
   ip address 10.0.0.254 255.255.255.0
   exit
vlan 300
   name "IPMI"
   untagged 13-15,18-19
   tagged 24
   exit
vlan 133
   name "VLAN133"
   untagged 1,5,9,22
   tagged 24
   exit
vlan 135
   name "VLAN135"
   untagged 20
   tagged 24
   exit
spanning-tree Trk1 priority 4
spanning-tree Trk2 priority 4
spanning-tree Trk3 priority 4

===

root@kvm-02:~# cat /proc/net/bonding/bond1
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer3+4 (1)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0

802.3ad info
LACP rate: fast
Min links: 0
Aggregator selection policy (ad_select): stable
System priority: 65535
System MAC address: 14:fe:b5:d2:43:1b
Active Aggregator Info:
Aggregator ID: 1
Number of ports: 3
Actor Key: 9
Partner Key: 53
Partner Mac Address: 00:15:60:fe:46:80

Slave Interface: eno2
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 14:fe:b5:d2:43:1b
Slave queue ID: 0
Aggregator ID: 1
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 0
details actor lacp pdu:
system priority: 65535
system mac address: 14:fe:b5:d2:43:1b
port key: 9
port priority: 255
port number: 1
port state: 63
details partner lacp pdu:
system priority: 18048
system mac address: 00:15:60:fe:46:80
oper key: 53
port priority: 0
port number: 6
port state: 61

Slave Interface: eno3
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 14:fe:b5:d2:43:1d
Slave queue ID: 0
Aggregator ID: 1
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 0
details actor lacp pdu:
system priority: 65535
system mac address: 14:fe:b5:d2:43:1b
port key: 9
port priority: 255
port number: 2
port state: 63
details partner lacp pdu:
system priority: 18048
system mac address: 00:15:60:fe:46:80
oper key: 53
port priority: 0
port number: 7
port state: 61

Slave Interface: eno4
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 14:fe:b5:d2:43:1f
Slave queue ID: 0
Aggregator ID: 1
Actor Churn State: none
Partner Churn 

Re: Gateway disappears on IPv6

[Rainer Dorsch]

Am Montag, 10. Juli 2017, 10:24:43 CEST schrieb Rainer Dorsch:
> Hi,
> 
> I added a IPv6 support to a KVM virtualized Jessie system following the
> instructions by the hoster
> 
> https://www.netcup-wiki.de/wiki/Zus
> %c3%a4tzliche_IP_Adresse_konfigurieren#IPv6%7C
> 
> I my case, I added
> 
> (for me it looks a little weird that IPv4 gets configured via dhcp and IPv6
> is a static configuration, but that is how I read the information in the
> wiki.
> 
> After rebooting the system works nicely and shows ipv6 addresses and a
> routing table
> 
> root@netcup:~# ip -6 addr show
> 1: lo:  mtu 65536
> inet6 ::1/128 scope host
>valid_lft forever preferred_lft forever
> 2: eth0:  mtu 1500 qlen 1000
> inet6 2a03:4000:6:52b6::/64 scope global
>valid_lft forever preferred_lft forever
> inet6 fe80::5054:9cff:fe31:f1e0/64 scope link
>valid_lft forever preferred_lft forever
> root@netcup:~# /sbin/route -6
> Kernel IPv6 routing table
> DestinationNext Hop   Flag Met Ref Use
> If
> ::1/128:: U256 0 0
> ::lo
> 
> 2a03:4000:6:52b6::/64  :: U256 0 0
> eth0
> fe80::/64  :: U256 0 0
> eth0
> 
> ::/0   fe80::1UGDAe 1024 3 0
> 
> eth0
> 
> ::/0   :: !n   -1  1   163
> ::lo
> ::1/128:: Un   0   136
> ::lo
> 
> 2a03:4000:6:52b6::/128 :: Un   0   714
> lo fe80::5054:9cff:fe31:f1e0/128  :: Un   0   1
> 5 lo ff00::/8   :: U256 10 
>0 eth0
> 
> ::/0   :: !n   -1  1   163
> ::lo
> 
> root@netcup:~#
> 
> After some time (at least hours) the server is not reachable anymore on its
> IPv6 address, when connecting on the IPv4 address it seems that the gateway
> fe80::1 got lost:
> 
> root@netcup:~# ip -6 addr show
> 1: lo:  mtu 65536
> inet6 ::1/128 scope host
>valid_lft forever preferred_lft forever
> 2: eth0:  mtu 1500 qlen 1000
> inet6 2a03:4000:6:52b6::/64 scope global
>valid_lft forever preferred_lft forever
> inet6 fe80::5054:9cff:fe31:f1e0/64 scope link
>valid_lft forever preferred_lft forever
> root@netcup:~# /sbin/route -6
> Kernel IPv6 routing table
> DestinationNext Hop   Flag Met Ref Use
> If
> ::1/128:: U256 0 0
> ::lo
> 
> 2a03:4000:6:52b6::/64  :: U256 0 0
> eth0
> fe80::/64  :: U256 0 0
> eth0
> 
> ::/0   :: !n   -1  1  3321
> ::lo
> ::1/128:: Un   0   1   270
> ::lo
> 
> 2a03:4000:6:52b6::/128 :: Un   0   2   670
> lo fe80::5054:9cff:fe31:f1e0/128  :: Un   0   1   
> 34 lo ff00::/8   :: U256 12
> 0 eth0
> 
> ::/0   :: !n   -1  1  3321
> ::lo
> 
> root@netcup:~#
> 
> Rebooting restores the routing table and makes IPv6 working again.
> 
> Has anybody an idea what is going wrong here? Any hint is welcome.
> 

I wrote a script to detect when the unexpected route change happens:

rd@netcup:~$ cat ip6-test.sh 

Interesting enough around the time when the ipv6 network becomes unreachable

Wed Jul 12 23:03:59 CEST 2017, connection ok
Wed Jul 12 23:04:29 CEST 2017, connection ok
Wed Jul 12 23:04:59 CEST 2017, connection lost

funding & viability questions of GPL enforcement.

[Bradley M. Kuhn]

Bruce, your analysis ignores the political forces that have allied to thwart
GPL enforcement efforts.  If Conservancy did not face these anti-enforcement
politics regularly, Conservancy could and would spend more time working on
bringing more companies into compliance.

I hope you'll review my FOSDEM keynote [0] and LibrePlanet talk [1] (the
latter of which was covered on LWN [2]), wherein I discuss the political
efforts by many others who seek to end GPL enforcement.  I hope you'll
assist us in that political struggle, rather than shaming and blaming the
one organization who actually enforces the GPL for Linux, Debian, Samba, and
many other projects.

Bruce wrote yesterday on debian-user:
> [Conservancy] may have allowed itself ... to be in the position of
> suppressing developer's rights.

Rather than suppressing developers' rights (as you accused of us above),
Conservancy has created the only welcoming coalition of Linux copyright
holders [3] who wish to enforce, adhering to community principles.  The
wealthy and powerful who seek to end GPL enforcement view our coalition as
the primary threat to their goal.  That's why they invest inordinate
resources into thwarting Conservancy's enforcement efforts.

Bruce also wrote yesterday on debian-user:
> it would be fair for these dual-licensing companies, who offered the GPL
> but made dual licensing available to those who did not wish to accept the
> GPL terms, to exact the fees of lost commercial licensing from commercial
> infringers. Those infringers clearly had paid licensing as an option.

Meanwhile, these aggressive enforcement-centric business models function
precisely because their central tenant *discourages* sharing and
modification of the code under the copyleft license.  The typical goal of
those models is to frighten "customers" into buying a non-copyleft license.
While you're correct that they generate revenue, I don't believe that the
goal of copyleft was to create an ecosystem where most users operate under a
proprietary license that they were cajoled to accept -- under threat of
overly captious for-profit enforcement.

You also mentioned the "revenue model" of lawsuits.  While perhaps Patrick
McHardy gained some amount of personal wealth (although reports on how much
he's really recovered are unreliable rumors), that was only successful
precisely because McHardy's enforcement did not prioritize encouraging
compliant behavior.  (In fact, his model required discouraging such
behavior, because (in his settlement agreements that I've seen) his larger
recoveries came from confused violators who agreed to pay larger amounts if
found out of compliance again later.)  Such types of lawsuits are a serious
problem.  That's why Conservancy was first to criticize McHardy [4], and why
Conservancy worked with the Netfilter team to encourage them to (a) also
denounce McHardy's activity [5] and (b) endorse the Principles of
Community-Oriented GPL Enforcement [6].

Note that those Principles don't say that damages should never be sought in
lawsuits, but rather, that *prioritizing* revenue over compliance is a
problem.  You can see on Conservancy's past Form 990s that Conservancy has
received revenue from GPL enforcement.  What I think those of you who have
not actually engaged in litigation don't realize is that when you face a
large bankroll on the Defendant's side, you take on real financial risk in
litigation.  Even though most Courts will award attorney's fees and costs
*at the end*, a small charity bringing litigation must consider carefully
what happens while the years of litigation and appeals continue, during
which the Defendant funds the best legal and political power that money can
buy to try to crush you.  The copyright system is rigged against the small
entity, so we must be agile, creative, and twice as diligent to succeed.

So, Bruce, I'm more frustrated than anyone that GPL violations are rampant
and we've not found in our community an effective way to fund enforcement
such that GPL violations become rare rather than common.  But -- even though
every time I walk into an electronics store, I see a rows of GPL-violating
products -- I don't think it justifies abandoning our Principles, or taking
unnecessary risks.  Furthermore, we already have initiatives like McHardy's
and we don't see increased compliance as a result.  Thus, even if we wanted
to pursue enforcement driven by avarice, such has already been shown not to
achieve what matters most -- more software freedom for users and developers.

Bruce wrote further on debian-user:
> 1. Failure of SFC or its funded parties to attempt to appeal the VMWare
> decision

Bruce, please don't spread this disinformation; I know many are saying it,
and you probably heard it from others, but it's just incorrect.  The appeal
in Hellwig v. VMware is active in the German courts [7].  Everyone knows
that legal appeals take a very long time.  We just have to wait and keep
funding the lawyers until it's done.

[SOLVED (mostly)] Re: SAMBA problems on Debian 8.8

[Hans Kraus]

Thanks a lot to all who have helped and/or contemplated my problem.

After:
---
apt-get install --reinstall samba
apt-get install samba-dbg samba-doc
---
and installing the suggested packages too I see:

dpkg -l | grep samba
---
ii  libcrypt-smbhash-perl   0.12-4 
all  generate LM/NT hash of a 
password for samba
ii  python-samba 
2:4.2.14+dfsg-0+deb8u7+b1amd64Python bindings for Samba
ii  samba 
2:4.2.14+dfsg-0+deb8u7+b1amd64SMB/CIFS file, print, 
and login server for Unix
ii  samba-common 
2:4.2.14+dfsg-0+deb8u7   all  common files used by 
both the Samba server and client
ii  samba-common-bin 
2:4.2.14+dfsg-0+deb8u7+b1amd64Samba common files 
used by both the server and the client
ii  samba-dbg 
2:4.2.14+dfsg-0+deb8u7+b1amd64Samba debugging symbols
ii  samba-doc 
2:4.2.14+dfsg-0+deb8u7   all  Samba documentation
ii  samba-dsdb-modules 
2:4.2.14+dfsg-0+deb8u7+b1amd64Samba Directory 
Services Database
ii  samba-libs:amd64 
2:4.2.14+dfsg-0+deb8u7+b1amd64Samba core libraries
ii  samba-vfs-modules 
2:4.2.14+dfsg-0+deb8u7+b1amd64Samba Virtual 
FileSystem plugins
ii  vlc-plugin-samba 
2.2.6-1~deb8u1   amd64Samba plugin for VLC

---

systemctl status smbd.service:
---
root@robbe:/etc/samba# systemctl status smbd.service
● smbd.service - LSB: start Samba SMB/CIFS daemon (smbd)
   Loaded: loaded (/etc/init.d/smbd)
   Active: active (running) since Sat 2017-07-15 17:45:27 CEST; 35min ago
  Process: 1906 ExecStop=/etc/init.d/smbd stop (code=exited, 
status=0/SUCCESS)
  Process: 1911 ExecStart=/etc/init.d/smbd start (code=exited, 
status=0/SUCCESS)

   CGroup: /system.slice/smbd.service
   ├─1920 /usr/sbin/smbd -D
   ├─1923 /usr/sbin/smbd -D
   └─3101 /usr/sbin/smbd -D

Jul 15 17:45:27 robbe smbd[1911]: Starting SMB/CIFS daemon: smbd.
Jul 15 17:45:27 robbe systemd[1]: Started LSB: start Samba SMB/CIFS 
daemon (smbd).
Jul 15 17:51:19 robbe smbd[2533]: pam_unix(samba:session): session 
opened for user kraush by (uid=0)
Jul 15 17:51:56 robbe smbd[2533]: pam_unix(samba:session): session 
closed for user kraush
Jul 15 17:53:57 robbe smbd[2568]: pam_unix(samba:session): session 
opened for user kraush by (uid=0)
Jul 15 17:54:19 robbe smbd[2568]: pam_unix(samba:session): session 
closed for user kraush
Jul 15 17:54:30 robbe smbd[2573]: pam_unix(samba:session): session 
opened for user kraush by (uid=0)
Jul 15 17:54:41 robbe smbd[2573]: pam_unix(samba:session): session 
closed for user kraush
Jul 15 17:55:51 robbe smbd[3101]: pam_unix(samba:session): session 
opened for user kraush by (uid=0)
Jul 15 18:07:30 robbe smbd[3101]: pam_unix(samba:session): session 
closed for user kraush
Jul 15 18:07:30 robbe smbd[3101]: pam_unix(samba:session): session 
opened for user kraush by (uid=0)

---

I can now again connect to the shares via the "Connect Network Drive"
window, choosing a drive letter and entering:
\\\.

I still do not see the Shares (on Windows 8.1) in the "Connect Network
Drive" window in the "Search" part.

Kind regards,
Hans

Am 15.07.2017 um 17:10 schrieb Jason Wittlin-Cohen:

BTW, here is what I see when I run dpkg -l | grep samba:

jason@storage-server:~$ dpkg -l | grep samba
ii  python-samba  2:4.2.14+dfsg-0+deb8u7+b1 
   amd64Python bindings for Samba
ii  samba 2:4.2.14+dfsg-0+deb8u7+b1 
   amd64SMB/CIFS file, print, and login server for Unix
ii  samba-common  2:4.2.14+dfsg-0+deb8u7 
  all  common files used by both the Samba server and client
ii  samba-common-bin  2:4.2.14+dfsg-0+deb8u7+b1 
   amd64Samba common files used by both the server and 
the client
ii  samba-dbg 2:4.2.14+dfsg-0+deb8u7+b1 
   amd64Samba debugging symbols
ii  samba-doc 2:4.2.14+dfsg-0+deb8u7 
  all  Samba documentation
ii  samba-dsdb-modules2:4.2.14+dfsg-0+deb8u7+b1 
   amd64Samba Directory Services Database
ii  samba-libs:amd64  2:4.2.14+dfsg-0+deb8u7+b1 
   amd64Samba core libraries
ii  samba-vfs-modules 2:4.2.14+dfsg-0+deb8u7+b1 
  

Re: interesting: Linux on Android

[Fungi4All]

> From: d...@randomstring.org
> Not yet a Debian on Android, but:
> https://ollieparanoid.github.io/post/50-days-of-postmarketOS/
> summarizes the first 50 days of building Linux directly for
> several smartphones, with the intention of eventually getting
> them fully functional. Their work could lead to a Debian
> flavor/spin/whatever it"s called now.
> Personally, I would be pretty happy to run Debian on a phone
> instead of the giant pile of Java sitting on an old kernel that
> currently constitutes Android.
> -dsr-

20 days of me trying to do something to an unrooted tablet and
the verdict is that you can not make a computer system out of
cat dish (used to be frisbie). For a rooted system you pay big
bucks, might as well get one of those gadgets with free open
architecture. At least you will know what your hardware will
be transmitting to your "enemies".
On an unrooted device with secret hw-code all you can do is
run something within an android compartment/sandbox.
More than half the machine's resources are already occupied
running the sandbox area (like gnuroot or termux). Start with
a cheap low resource machine and by the time you get gnuroot
ready to direct a Gui to a GFXserver program, either the one or
the other crashes with lack of resources.  Then you open
your windows if you are lucky and 90% of the stuff will not run
in this pseudo linux/debian environment.
Systemd is having a fit as it sweeps most of the left over resources
before you even run anything.
It is amazing how something SO STUPID can be marketed to
become as esential as underware. My 6510i still sounds crystal
clear, and does all a phone is meant to do.

Re: How to use Garmin Connect with Debian 7?

[rhkramer]

On Saturday, July 15, 2017 04:10:01 AM Jörg-Volker Peetz wrote:
> rhkra...@gmail.com wrote on 07/14/17 14:10:
> > Can you provide a more precise link--that link gives me "Oh! Die Seite
> > konnte nicht gefunden werden."

...

> Today, at 7:57 UTC o'clock both links worked for me.

Thanks--it worked (just now) for me also--don't know why it didn't work 
earlier.


> The blog page mainly states a procedure which worked also on other devices
> like the older Oregon: the firmware file is copied via USB onto the device
> into the "/Garmin/" directory under the name "gupdate.gcd". When the
> device is restarted, this new firmware file get's installed.

Thanks for this, also, it may be all the clues I need ;-)

regards,
Randy Kramer

Re: SAMBA problems on Debian 8.8

[Jason Wittlin-Cohen]

BTW, here is what I see when I run dpkg -l | grep samba:

jason@storage-server:~$ dpkg -l | grep samba
ii  python-samba  2:4.2.14+dfsg-0+deb8u7+b1
  amd64Python bindings for Samba
ii  samba 2:4.2.14+dfsg-0+deb8u7+b1
  amd64SMB/CIFS file, print, and login server for Unix
ii  samba-common  2:4.2.14+dfsg-0+deb8u7
   all  common files used by both the Samba server and client
ii  samba-common-bin  2:4.2.14+dfsg-0+deb8u7+b1
  amd64Samba common files used by both the server and the client
ii  samba-dbg 2:4.2.14+dfsg-0+deb8u7+b1
  amd64Samba debugging symbols
ii  samba-doc 2:4.2.14+dfsg-0+deb8u7
   all  Samba documentation
ii  samba-dsdb-modules2:4.2.14+dfsg-0+deb8u7+b1
  amd64Samba Directory Services Database
ii  samba-libs:amd64  2:4.2.14+dfsg-0+deb8u7+b1
  amd64Samba core libraries
ii  samba-vfs-modules 2:4.2.14+dfsg-0+deb8u7+b1
  amd64Samba Virtual FileSystem plugins


On Sat, Jul 15, 2017 at 11:09 AM, Jason Wittlin-Cohen <
jwittlinco...@gmail.com> wrote:

> You are running an out-of-date version of samba (2:4.2.14+dfsg-0+deb8u6
>  vs. 4.2.14+dfsg-0+deb8u7+b1).  In addition, you seem to be missing
> samba-common-bin,  samba-dsdb-modules, and python-samba, all of which are
> dependencies of samba.
>
> Try 'sudo apt-get install --reinstall samba'
>
> If that doesn't include install the removed packages, run, 'sudo apt-get
> install samba-common-bin samba-dsdb-modules python-samba'
>
> On Sat, Jul 15, 2017 at 11:01 AM, Hans Kraus  wrote:
>
>> Am 15.07.2017 um 16:05 schrieb Jason Wittlin-Cohen:
>>
>>> What does 'dpkg -l | grep samba'  show?
>>>
>>> On Sat, Jul 15, 2017 at 10:01 AM, Hans Kraus >> > wrote:
>>>
>>> Am 15.07.2017 um 14:48 schrieb Jason Wittlin-Cohen:
>>>
>>> Did you run an apt-get dist-upgrade yesterday?  Debian released
>>> updated Samba packages as part of a security update.  However,
>>> the updated packages had dependency issues and were quickly
>>> replaced by new packages.  If you attempted to run a
>>> dist-upgrade with the broken packages, it would have installed
>>> samba and samba-core.  Check to see whether your samba packages
>>> are still installed.
>>>
>>> On Sat, Jul 15, 2017 at 7:56 AM, Hans Kraus >>  >>
>>> >> wrote:
>>>
>>>  Hi,
>>>
>>>  yesterday, 14. July, about 9:30 pm my SAMBA shares on
>>> Debian simply
>>>  stopped working. I did not do anything on the system.
>>>
>>>  When I now try to connect to them from Windows 8.1 I do not
>>> see them
>>>  in the "Connect Network Drive" window.
>>>
>>>  When I enter the address manually I get the error "The
>>> connection isn't
>>>  accepted from the remote device ...".
>>>
>>>  All texts are my translations from German, so the will be
>>> only
>>>  approximately correct.
>>>
>>>  Any advice for me and what debug info shall I supply?
>>>
>>>  Kind regards,
>>>  Hans
>>>
>>>
>>> No, definitely not. I do updates/upgrades rather infrequently and I
>>> issued (packed in a small script):
>>>
>>> /usr/sbin/update-smart-drivedb
>>> apt-get update
>>> apt-get -y upgrade
>>> apt-get -y autoremove
>>>
>>> only after the error occurred.
>>>
>>> Kind regards,
>>> Hans
>>>
>>
>> root@robbe:/var/log/samba# dpkg -l | grep samba
>> rc  samba 2:4.2.14+dfsg-0+deb8u6   amd64SMB/CIFS
>> file, print, and login server for Unix
>> ii  samba-common 2:4.2.14+dfsg-0+deb8u7   all  common
>> files used by both the Samba server and client
>> ii  samba-dsdb-modules 2:4.2.14+dfsg-0+deb8u7+b1amd64
>> Samba Directory Services Database
>> ii  samba-libs:amd64 2:4.2.14+dfsg-0+deb8u7+b1amd64
>> Samba core libraries
>> ii  samba-vfs-modules 2:4.2.14+dfsg-0+deb8u7+b1amd64
>> Samba Virtual FileSystem plugins
>> ii  vlc-plugin-samba 2.2.6-1~deb8u1   amd64
>> Samba plugin for VLC
>> root@robbe:/var/log/samba#
>>
>> Kind regards,
>> Hans
>>
>>
>

Re: SAMBA problems on Debian 8.8

[Jason Wittlin-Cohen]

You are running an out-of-date version of samba (2:4.2.14+dfsg-0+deb8u6
 vs. 4.2.14+dfsg-0+deb8u7+b1).  In addition, you seem to be missing
samba-common-bin,  samba-dsdb-modules, and python-samba, all of which are
dependencies of samba.

Try 'sudo apt-get install --reinstall samba'

If that doesn't include install the removed packages, run, 'sudo apt-get
install samba-common-bin samba-dsdb-modules python-samba'

On Sat, Jul 15, 2017 at 11:01 AM, Hans Kraus  wrote:

> Am 15.07.2017 um 16:05 schrieb Jason Wittlin-Cohen:
>
>> What does 'dpkg -l | grep samba'  show?
>>
>> On Sat, Jul 15, 2017 at 10:01 AM, Hans Kraus > > wrote:
>>
>> Am 15.07.2017 um 14:48 schrieb Jason Wittlin-Cohen:
>>
>> Did you run an apt-get dist-upgrade yesterday?  Debian released
>> updated Samba packages as part of a security update.  However,
>> the updated packages had dependency issues and were quickly
>> replaced by new packages.  If you attempted to run a
>> dist-upgrade with the broken packages, it would have installed
>> samba and samba-core.  Check to see whether your samba packages
>> are still installed.
>>
>> On Sat, Jul 15, 2017 at 7:56 AM, Hans Kraus >  >
>> >> wrote:
>>
>>  Hi,
>>
>>  yesterday, 14. July, about 9:30 pm my SAMBA shares on
>> Debian simply
>>  stopped working. I did not do anything on the system.
>>
>>  When I now try to connect to them from Windows 8.1 I do not
>> see them
>>  in the "Connect Network Drive" window.
>>
>>  When I enter the address manually I get the error "The
>> connection isn't
>>  accepted from the remote device ...".
>>
>>  All texts are my translations from German, so the will be
>> only
>>  approximately correct.
>>
>>  Any advice for me and what debug info shall I supply?
>>
>>  Kind regards,
>>  Hans
>>
>>
>> No, definitely not. I do updates/upgrades rather infrequently and I
>> issued (packed in a small script):
>>
>> /usr/sbin/update-smart-drivedb
>> apt-get update
>> apt-get -y upgrade
>> apt-get -y autoremove
>>
>> only after the error occurred.
>>
>> Kind regards,
>> Hans
>>
>
> root@robbe:/var/log/samba# dpkg -l | grep samba
> rc  samba 2:4.2.14+dfsg-0+deb8u6   amd64SMB/CIFS file,
> print, and login server for Unix
> ii  samba-common 2:4.2.14+dfsg-0+deb8u7   all  common
> files used by both the Samba server and client
> ii  samba-dsdb-modules 2:4.2.14+dfsg-0+deb8u7+b1amd64
> Samba Directory Services Database
> ii  samba-libs:amd64 2:4.2.14+dfsg-0+deb8u7+b1amd64
> Samba core libraries
> ii  samba-vfs-modules 2:4.2.14+dfsg-0+deb8u7+b1amd64
> Samba Virtual FileSystem plugins
> ii  vlc-plugin-samba 2.2.6-1~deb8u1   amd64
> Samba plugin for VLC
> root@robbe:/var/log/samba#
>
> Kind regards,
> Hans
>
>

Re: SAMBA problems on Debian 8.8

[Hans Kraus]

Am 15.07.2017 um 14:58 schrieb Ulf Volmer:

On 15.07.2017 13:56, Hans Kraus wrote:


yesterday, 14. July, about 9:30 pm my SAMBA shares on Debian simply
stopped working. I did not do anything on the system.


There were samba updates for jessie yesterday. First one was broken on
some systems so maybe it will help to do an upgrade again.


Any advice for me and what debug info shall I supply?


is samba running? If yes, any messages in the log?

best regards
Ulf



Hi, thanks for the help to all.
apt-get upgrade/update installed nothing. Therefore I presume that I
have the latest updates.

I tried to restart the Samba server:

root@robbe:/var/log/samba# systemctl restart smbd.service


Querying the status gives:

root@robbe:/var/log/samba# systemctl status smbd.service
● smbd.service - LSB: start Samba SMB/CIFS daemon (smbd)
   Loaded: loaded (/etc/init.d/smbd)
   Active: active (exited) since Sat 2017-07-15 15:35:43 CEST; 6s ago
  Process: 17381 ExecStop=/etc/init.d/smbd stop (code=exited, 
status=0/SUCCESS)
  Process: 17384 ExecStart=/etc/init.d/smbd start (code=exited, 
status=0/SUCCESS)


Jul 15 15:35:43 robbe systemd[1]: Starting LSB: start Samba SMB/CIFS 
daemon (smbd)...
Jul 15 15:35:43 robbe systemd[1]: Started LSB: start Samba SMB/CIFS 
daemon (smbd).

root@robbe:/var/log/samba#


I don't find in the output of 'ps -elf' anything with samba or smb.

In '/var/log/samba' the latest files are from yesterday, around the time
the error occurred. The log files are (the bigger ones are truncated):

log.nmbd

...
[2017/07/14 20:49:01.939924,  0] 
../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)

  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name KRAUS_ZUHAUSE<1b> for 
the workgroup KRAUS_ZUHAUSE.

  Unable to sync browse lists in this workgroup.
[2017/07/14 20:49:01.940054,  0] 
../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)

  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name KRAUS_ZUHAUSE<1b> for 
the workgroup KRAUS_ZUHAUSE.

  Unable to sync browse lists in this workgroup.
[2017/07/14 21:04:01.949910,  0] 
../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)

  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name KRAUS_ZUHAUSE<1b> for 
the workgroup KRAUS_ZUHAUSE.

  Unable to sync browse lists in this workgroup.
[2017/07/14 21:04:01.950037,  0] 
../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)

  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name KRAUS_ZUHAUSE<1b> for 
the workgroup KRAUS_ZUHAUSE.

  Unable to sync browse lists in this workgroup.
[2017/07/14 21:19:01.963122,  0] 
../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)

  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name KRAUS_ZUHAUSE<1b> for 
the workgroup KRAUS_ZUHAUSE.

  Unable to sync browse lists in this workgroup.
[2017/07/14 21:19:01.963239,  0] 
../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)

  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name KRAUS_ZUHAUSE<1b> for 
the workgroup KRAUS_ZUHAUSE.

  Unable to sync browse lists in this workgroup.
[2017/07/14 21:34:01.964702,  0] 
../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)

  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name KRAUS_ZUHAUSE<1b> for 
the workgroup KRAUS_ZUHAUSE.

  Unable to sync browse lists in this workgroup.
[2017/07/14 21:34:01.964832,  0] 
../source3/nmbd/nmbd_browsesync.c:354(find_domain_master_name_query_fail)

  find_domain_master_name_query_fail:
  Unable to find the Domain Master Browser name KRAUS_ZUHAUSE<1b> for 
the workgroup KRAUS_ZUHAUSE.

  Unable to sync browse lists in this workgroup.
[2017/07/14 21:40:44.998819,  0] ../source3/nmbd/nmbd.c:58(terminate)
  Got SIGTERM: going down...


log.smbd

[2017/07/14 21:40:46.136827,  0] ../lib/util/pidfile.c:153(pidfile_unlink)
  Failed to delete pidfile /var/run/samba/smbd.pid. Error was No such 
file or directory



log.wb-BUILTIN

[2017/06/23 11:38:12.736446,  0] 
../source3/winbindd/winbindd.c:266(winbindd_sig_term_handler)

  Got sig[15] terminate (is_parent=0)

Re: SAMBA problems on Debian 8.8

[Hans Kraus]

Am 15.07.2017 um 16:05 schrieb Jason Wittlin-Cohen:

What does 'dpkg -l | grep samba'  show?

On Sat, Jul 15, 2017 at 10:01 AM, Hans Kraus > wrote:


Am 15.07.2017 um 14:48 schrieb Jason Wittlin-Cohen:

Did you run an apt-get dist-upgrade yesterday?  Debian released
updated Samba packages as part of a security update.  However,
the updated packages had dependency issues and were quickly
replaced by new packages.  If you attempted to run a
dist-upgrade with the broken packages, it would have installed
samba and samba-core.  Check to see whether your samba packages
are still installed.

On Sat, Jul 15, 2017 at 7:56 AM, Hans Kraus  >> wrote:

 Hi,

 yesterday, 14. July, about 9:30 pm my SAMBA shares on
Debian simply
 stopped working. I did not do anything on the system.

 When I now try to connect to them from Windows 8.1 I do not
see them
 in the "Connect Network Drive" window.

 When I enter the address manually I get the error "The
connection isn't
 accepted from the remote device ...".

 All texts are my translations from German, so the will be only
 approximately correct.

 Any advice for me and what debug info shall I supply?

 Kind regards,
 Hans


No, definitely not. I do updates/upgrades rather infrequently and I
issued (packed in a small script):

/usr/sbin/update-smart-drivedb
apt-get update
apt-get -y upgrade
apt-get -y autoremove

only after the error occurred.

Kind regards,
Hans


root@robbe:/var/log/samba# dpkg -l | grep samba
rc  samba 2:4.2.14+dfsg-0+deb8u6   amd64SMB/CIFS 
file, print, and login server for Unix
ii  samba-common 2:4.2.14+dfsg-0+deb8u7   all 
common files used by both the Samba server and client
ii  samba-dsdb-modules 2:4.2.14+dfsg-0+deb8u7+b1amd64 
Samba Directory Services Database
ii  samba-libs:amd64 2:4.2.14+dfsg-0+deb8u7+b1amd64 
Samba core libraries
ii  samba-vfs-modules 2:4.2.14+dfsg-0+deb8u7+b1amd64 
Samba Virtual FileSystem plugins
ii  vlc-plugin-samba 2.2.6-1~deb8u1   amd64 
Samba plugin for VLC

root@robbe:/var/log/samba#

Kind regards,
Hans

PS: Sorry for the personal mails.

Re: Touchpad no funciona en notebook debian 9

[Germán Avendaño Ramírez]

El 15/07/17 a las 08:38, Marioca escribió:
> Buenas lista, he agotado instancias por eso la solicitud de soporte por
> aquí con uds, he actualizado el SO de mi notebook a stretch 9, cuando
> voy a la parte de Todas las Configuraciones ==>> Ratón y Touchpad la
> misma no me muestra la opción de touchpad como muestran en los soportes
> y ayuda, es como si el SO no detecta el equipo como notebook o portatil
> y por ende no puedo configurar el touch y el hábito y comodidad del uso
> del mismo se hace tedioso. Si a algunos de uds le ha pasado lo mismo
> favor indicarme la solución ya que en otras versiones lo he configurado
> sin problemas
> 
> Desde ya muchas gracias
> 
> 
> -- 
> Per quanto riguarda
> Marioca

Debe cerciorarse de tener instalado el paquete xserver-xorg-input-synaptics

Si no lo tiene instalado, debe instalarlo y reiniciar el sistema gráfico
o reiniciar el sistema.

-- 
Germán Avendaño Ramírez
Lic. Mat. U.D., M.Sc. U.N.
Email: german_...@autistici.org
GNU/Linux user # 531535
Sent from Debian 9 GNU/Linux

Re: thunderbird problema configuracion de una cuenta con gmail

[andresdg]

Buenas, a mi me pasa lo mismo.  probé los dos enlaces que adjuntas y todo
está como en orden. Pero sigue apareciendo la ventana de verificación de
Google y cuando hago clic en siguiente es como si el botón no funcionara.
Cuando configuré la cuenta de gmail en el escritorio de Gnome, me apareció
la misma ventana de verificación pero no tuve ningún problema.Si se les
ocurre otra idea...Gracias, saludos a todos.



--
View this message in context: 
http://debian.2.n7.nabble.com/thunderbird-problema-configuracion-de-una-cuenta-con-gmail-tp4134387p4150154.html
Sent from the debian-user-spanish mailing list archive at Nabble.com.

Touchpad no funciona en notebook debian 9

[Marioca]

Buenas lista, he agotado instancias por eso la solicitud de soporte por
aquí con uds, he actualizado el SO de mi notebook a stretch 9, cuando voy a
la parte de Todas las Configuraciones ==>> Ratón y Touchpad la misma no me
muestra la opción de touchpad como muestran en los soportes y ayuda, es
como si el SO no detecta el equipo como notebook o portatil y por ende no
puedo configurar el touch y el hábito y comodidad del uso del mismo se hace
tedioso. Si a algunos de uds le ha pasado lo mismo favor indicarme la
solución ya que en otras versiones lo he configurado sin problemas

Desde ya muchas gracias


-- 
Per quanto riguarda
Marioca

Re: SAMBA problems on Debian 8.8

[Ulf Volmer]

On 15.07.2017 13:56, Hans Kraus wrote:

> yesterday, 14. July, about 9:30 pm my SAMBA shares on Debian simply
> stopped working. I did not do anything on the system.

There were samba updates for jessie yesterday. First one was broken on
some systems so maybe it will help to do an upgrade again.

> Any advice for me and what debug info shall I supply?

is samba running? If yes, any messages in the log?

best regards
Ulf

Re: SAMBA problems on Debian 8.8

[Dejan Jocic]

On 15-07-17, Hans Kraus wrote:
> Hi,
> 
> yesterday, 14. July, about 9:30 pm my SAMBA shares on Debian simply
> stopped working. I did not do anything on the system.
> 
> When I now try to connect to them from Windows 8.1 I do not see them
> in the "Connect Network Drive" window.
> 
> When I enter the address manually I get the error "The connection isn't
> accepted from the remote device ...".
> 
> All texts are my translations from German, so the will be only
> approximately correct.
> 
> Any advice for me and what debug info shall I supply?
> 
> Kind regards,
> Hans
> 

Samba had 2 security updates, first one had messed up dependencies and
second one solved that. Perhaps you just updated first one and need to
do update/upgrade again to catch up second one?

SAMBA problems on Debian 8.8

[Hans Kraus]

Hi,

yesterday, 14. July, about 9:30 pm my SAMBA shares on Debian simply
stopped working. I did not do anything on the system.

When I now try to connect to them from Windows 8.1 I do not see them
in the "Connect Network Drive" window.

When I enter the address manually I get the error "The connection isn't
accepted from the remote device ...".

All texts are my translations from German, so the will be only
approximately correct.

Any advice for me and what debug info shall I supply?

Kind regards,
Hans

interesting: Linux on Android

[Dan Ritter]

Not yet a Debian on Android, but:

https://ollieparanoid.github.io/post/50-days-of-postmarketOS/

summarizes the first 50 days of building Linux directly for
several smartphones, with the intention of eventually getting
them fully functional. Their work could lead to a Debian
flavor/spin/whatever it's called now.

Personally, I would be pretty happy to run Debian on a phone
instead of the giant pile of Java sitting on an old kernel that
currently constitutes Android.

-dsr-

Xfce Power Management Problem in Sketch

[Stephen P. Molnar]

I have just upgraded by Linux platform to v-9.0.0 from v-8.8.0.

Xfce Power Management fails to blank the display.

I have not been able to find a solution and would appreciate some 
assistance.


Thanks in advance.

--
Stephen P. Molnar, Ph.D.Life is a fuzzy set
www.molecular-modeling.net  Stochastic and multivariate
(614)312-7528 (c)
Skype: smolnar1

Re: How to use Garmin Connect with Debian 7?

[Jörg-Volker Peetz]

rhkra...@gmail.com wrote on 07/14/17 14:10:
>> Am 13.07.17 12:13 nachm., schrieb Jörg-Volker Peetz:
>>> there's this nice blog in German:
>>> https://blog.dafb-o.de/neue-firmware-fuer-garmin-devices-unter-linux/
>>> where the firmware update procedure from Linux is detailed and a link to
>>> the firmware files for your device is given http://gawisp.com/perry/edge/
>>> .
> 
> Can you provide a more precise link--that link gives me "Oh! Die Seite konnte 
> nicht gefunden werden."
> 
> I don't suppose there is an English translation?  (I assume not, and I'll see 
> if Google translate makes it understandable to me.)
> 
> Thanks!
> Randy Kramer
> 
> 
Today, at 7:57 UTC o'clock both links worked for me.

The blog page mainly states a procedure which worked also on other devices like
the older Oregon: the firmware file is copied via USB onto the device into the
"/Garmin/" directory under the name "gupdate.gcd". When the device is restarted,
this new firmware file get's installed.
>From the second link the firmware file can be downloaded.

Regards,
jvp.

Re: Navigateur par défaut de Debian Stretch - Impossible à lancer

[Thierry Bugier Pineau]

Bonjour

Je pense que ce problème dépend de comment a été installé l'environnement 
graphique.

Il y a des paquets task-xfce4-desktop (ou quelque chose comme ça), un par 
environnement graphique. Ces paquets installent plein de logiciels dont un 
navigateur.

Si on passe par un autre moyen, en sélectionnant plus finement ses paquets 
(xserver-org, lightdm, xfce4) on peut se retrouver avec pour seuls logiciels 
ceux de l'environnement graphique. Pas de libreoffice ni Firefox par exemple.

 

Le 14 juillet 2017 18:27:36 GMT+02:00, G2PC  a écrit :
>
>
>Le 14/07/2017 à 17:36, Thierry Bugier Pineau a écrit :
>> Bonjour
>>
>> La question peut paraitre stupide mais avant d'installer Firefox ESR
>y
>> avait il un navigateur installé ?
>>
>> Il me semble que ça m'est déjà arrivé et que le problème était
>> simplement là : je n'avais aucun navigateur.
>>
>> Le 14 juillet 2017 15:00:12 GMT+02:00, G2PC  a
>> écrit :
>>
>> Impossible de lancer le navigateur Web par défaut.
>> Erreur d'entrée/sortie.
>>
>> Sur une machine virtuelle VirtualBox, toute neuve, sans
>> installation supplémentaire, installée avec Debian Stretch i386
>> netinstall.
>>
>> deb http://deb.debian.org/debian/ stable main contrib non-free
>> deb-src http://deb.debian.org/debian/ stable main contrib
>non-free
>> deb http://deb.debian.org/debian/ stable-updates main contrib
>> non-free
>> deb-src http://deb.debian.org/debian/ stable-updates main contrib
>> non-free
>> deb http://deb.debian.org/debian-security stable/updates main
>> deb-src http://deb.debian.org/debian-security stable/updates main
>> deb http://ftp.debian.org/debian stretch-backports main
>> deb-src http://ftp.debian.org/debian stretch-backports main
>>
>> Pour récupérer un navigateur, j'ai installé firefox-esr
>>
>> Le raccourci du navigateur se lance maintenant correctement, avec
>> Firefox.
>>
>> Est ce qu'il est normal que le navigateur par défaut ne se lance
>> pas, avec une erreur entrée/sortie, je suppose que non.
>>
>>
>> -- 
>> Envoyé de mon appareil Android avec Courriel K-9 Mail. Veuillez
>> excuser ma brièveté. 
>
>Bonjour, ce n'est pas une question stupide, j'ai pensé comme toi, qu'il
>me fallait installer un navigateur au choix.
>Je suis juste étonné de ne pas voir de navigateur par défaut, sur une
>Debian 9.

-- 
Envoyé de mon appareil Android avec Courriel K-9 Mail. Veuillez excuser ma 
brièveté.