System suspends when logging out of the system
I've installed Debain Buster with KDE Plasma 5 and I found that as soon as I try to power off my system screen just freezes and I need to force this process just switching it manually. Is there any advice? Any help is appreciated!
[testing] su - et X
Bonjour, De retour d'une semaine de vacances j'ai fait les mises à jours de testing et depuis je rencontre un problème pour me connecter au serveur X depuis un utilisateurs différent que celui en cours. Avant dans un terminal je faisais un 'xhost +local:' puis 'su - toto' et je pouvais lancer des applis X depuis toto. Maintenant ça me dit: "cannot open display:" Quelqu'un aurait-il une idée de la cause ? Gaëtan signature.asc Description: This is a digitally signed message part
Re: question about sound
On 2018-08-06 21:39, T BkRl wrote: It sounds like a limiter is what you need? Ah, OK seems like VLC might do it in the menu items tools - FROM: mick crane SENT: Monday, August 6, 2018 3:24 PM TO: Debian Users SUBJECT: question about sound hello, sorry is this is not on-topic I'm not very good at sound. Sometimes if I watch an mp4 film the volume in parts is low but then there will become some sound event that is very loud. It is true that my hearing is not as it was but I don't think that is it. I'm not exactly sure what controls "volume" but is there software that will cut off the noisier bits at a level without affecting the rest. mick -- Key ID 4BFEBB31 -- Key ID4BFEBB31
Re: question about sound
It sounds like a limiter is what you need? From: mick crane Sent: Monday, August 6, 2018 3:24 PM To: Debian Users Subject: question about sound hello, sorry is this is not on-topic I'm not very good at sound. Sometimes if I watch an mp4 film the volume in parts is low but then there will become some sound event that is very loud. It is true that my hearing is not as it was but I don't think that is it. I'm not exactly sure what controls "volume" but is there software that will cut off the noisier bits at a level without affecting the rest. mick -- Key ID 4BFEBB31
Re: Specifying multiple NICs
On Wednesday, August 1, 2018 2:56:55 PM EDT Brian wrote: > On Wed 01 Aug 2018 at 19:57:32 +0200, Pascal Hambourg wrote: > > Le 01/08/2018 à 19:32, Brian a écrit : > > > On Wed 01 Aug 2018 at 12:00:41 -0400, Mark Neidorff wrote: > > > > In the past, I referred to each NIC as eth0, eth1,. but now, > > > > these names are not permanent, and the designation can change on > > > > boot. I looked at the "Network Coinfiguration" document which didn't > > > > have a solution. So, either how do I make the names for the NICs > > > > permanent or what do I use fot the names of the NICs? > > > > > > Starting with v197, systemd/udev will automatically assign predictable, > > > stable network interface names for all local Ethernet devices. jessie > > > has udev v215. jessie-backports has v230. > > > > Jessie still has the old persistent naming scheme using > > /lib/udev/rules.d/75-persistent-net-generator.rules and > > /etc/udev/rules.d/70-persistent-net.rules by default, and the new > > predictable naming scheme is disabled (net.ifnames=0). The new predictable > > naming scheme has been enabled by default only since Stretch. > > Enable it, then. > > Delete /etc/udev/rules.d/70-persistent-network.rules and put > net.ifnames=1 on the kernel command line when booting. Thanks everyone for pointing me in the right direction. This should all work its way out now. Mark
Re: Network configuration
On 8/6/2018 9:15 PM, Ilyass Kaouam wrote: # Generated by NetworkManager Ok -- The app "NetworkManager" is managing your interfaces. To deal with NetworkManager through the CLI and config files you will need to do some reading: https://developer.gnome.org/NetworkManager/stable/nm-settings-keyfile.html https://developer.gnome.org/NetworkManager/stable/NetworkManager.conf.html https://arstechnica.com/civis/viewtopic.php?t=1163023 -- John Doe
Re: Network configuration
Thank's John :) :) Le lun. 6 août 2018 à 21:40, john doe a écrit : > On 8/6/2018 9:15 PM, Ilyass Kaouam wrote: > > # Generated by NetworkManager > > > > Ok -- The app "NetworkManager" is managing your interfaces. > > To deal with NetworkManager through the CLI and config files you will > need to do some reading: > > https://developer.gnome.org/NetworkManager/stable/nm-settings-keyfile.html > https://developer.gnome.org/NetworkManager/stable/NetworkManager.conf.html > https://arstechnica.com/civis/viewtopic.php?t=1163023 > > -- > John Doe > > -- *Ilyass kaouam* *Systems administrator* * Mastère européen Manager de Projets Informatiques*
question about sound
hello, sorry is this is not on-topic I'm not very good at sound. Sometimes if I watch an mp4 film the volume in parts is low but then there will become some sound event that is very loud. It is true that my hearing is not as it was but I don't think that is it. I'm not exactly sure what controls "volume" but is there software that will cut off the noisier bits at a level without affecting the rest. mick -- Key ID4BFEBB31
Re: Network configuration
# Generated by NetworkManager nameserver 8.8.8.8 Le lun. 6 août 2018 à 14:01, john doe a écrit : > On 8/6/2018 12:12 PM, Ilyass Kaouam wrote: > > I configured my network here (see attached picture please) > > > > [image: Capture d’écran 2018-08-06 à 12.12.06.png] > > > > I don't have access to images. > What is the output of: > > $ cat /etc/resolv.conf > > -- > John Doe > > -- *Ilyass kaouam* *Systems administrator* * Mastère européen Manager de Projets Informatiques*
problem with modern desktops on Buster
When I rebooted my computer (AMD64/Buster) yesterday, I couldn't get Plasma to operate. After logging with sddm, the computer locked up hard (wouldn't respond to SysRq or Ctl-Alt-Del) before the desktop appeared. I switched to Gnome which seems to work a little better but I was still getting lockups. I tried Gnome over Xorg in case it was a Wayland problem but that also seemed to have problems. It crashed overnight and left me with some panic text on the screen and the computer was locked up. I couldn't get much beyond the initial desktop display when I restarted. I've been using Gnome Flashback (Metacity) for about 5 hours now, including a couple periods when the screen saver / lock kicked in, and it seems OK. I'm not even sure where to report this problem since I can't identify a specific package that is causing it. However since Gnome Flashback seems to be working, I'd guess that it is in the flashier desktop elements.
Re: 2 Cartes réseau dont une dédié au multicast.
Le 06/08/2018 à 19:24, Frédéric MASSOT a écrit : Le 06/08/2018 à 17:18, Randy11 a écrit : Bonjour, Je souhaite disposer de 2 cartes réseau pour en dédiée une à un flux multicast. Je n'arrive pas à configurer la deuxième carte de façon à ce qu'elle lise le flux multicast alors que la carte par défaut y arrive. Le contexte : utilisation d'un émetteur HDMI sur Ethernet en multicast, le LKV373A de LENKENG, décrit dans "Hackable Magazine" N°23 de mars-avril 2018, sous Debian Stretch. Adjonction d'une seconde carte PCI TP-LINK Gigabit TG-3269 identifiée comme "enp5s0". La carte par défaut est "enp0s31f6" qui sert à l'accès Internet. Pour la seconde carte réseau ajoutée, ma configuration dans /etc/network/interfaces: auto enp5s0 iface enp5s0 inet static address 192.168.1.75 netmask 255.255.255.0 network 192.168.1.0 gateway 192.168.1.254 Tu peux nous donner la contenu complet du fichier "interfaces" ? Il ne doit pas y avoir qu'une seule ligne "gateway" (ipv4) dans un fichier "interfaces" ? /etc/network$ cat interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback # auto enp5s0 # iface enp5s0 inet static \ # address 192.168.1.75/24 \ # netmask 255.255.255.0 \ # network 192.168.1.0\ # gateway 192.168.1.254
Re: Indicador de volumen en XFCE4
El 03/08/18 a las 12:45, Marcelo P. Llanos C. escribió: ejecuta pavucontrol desde terminal: $ pavucontrol El 1 de agosto de 2018, 23:32, rv riveravaldez mailto:riveravaldezm...@gmail.com>> escribió: 2018-07-31 17:19 GMT-03:00 Julian Daich mailto:julia...@gmail.com>>: > Hola, > > No me aparece el indicador de volumen en Sid¿ como hago para que esté > en el área de notificaciones? > > Saludos, > > Julián > > -- > Julian > Por si acaso prueba 'alsamixer' (sin comillas) en una terminal, a ver si el audio funciona bien. Luego en XFCE creo recordar que el indicador de volumen era un plugin (o como lo quieras llamar) del panel inferior: búscalo con click-derecho entre las opciones que salen en el menú. Saludos Supongo que lo que quiere el usuario es tener el icono de volumen en la barra de tareas. Ni en sid ni en estable esta! xfce4 no lo agrega por defecto.. Haces en la barra: click derecho > opciones del menu: panel > añadir elementos nuevos. Tipia en el buscador pulseaudio o volumen y agreagas. Listo!
Re: 2 Cartes réseau dont une dédié au multicast.
Le 06/08/2018 à 17:18, Randy11 a écrit : > Bonjour, > > Je souhaite disposer de 2 cartes réseau pour en dédiée une à un flux > multicast. > Je n'arrive pas à configurer la deuxième carte de façon à ce qu'elle > lise le flux > multicast alors que la carte par défaut y arrive. > > Le contexte : utilisation d'un émetteur HDMI sur Ethernet en multicast, > le LKV373A de LENKENG, décrit dans "Hackable Magazine" N°23 de > mars-avril 2018, sous Debian > Stretch. Adjonction d'une seconde carte PCI TP-LINK Gigabit TG-3269 > identifiée comme > "enp5s0". La carte par défaut est "enp0s31f6" qui sert à l'accès Internet. > > Pour la seconde carte réseau ajoutée, ma configuration dans > /etc/network/interfaces: > auto enp5s0 > iface enp5s0 inet static > address 192.168.1.75 > netmask 255.255.255.0 > network 192.168.1.0 > gateway 192.168.1.254 Tu peux nous donner la contenu complet du fichier "interfaces" ? Il ne doit pas y avoir qu'une seule ligne "gateway" (ipv4) dans un fichier "interfaces" ? -- == | FRÉDÉRIC MASSOT | | http://www.juliana-multimedia.com | | mailto:frede...@juliana-multimedia.com | | +33.(0)2.97.54.77.94 +33.(0)6.67.19.95.69 | ===Debian=GNU/Linux===
Re: 2 Cartes réseau dont une dédié au multicast.
Le 06/08/2018 à 17:31, Bernard Schoenacker a écrit : - Mail original - De: "Randy11" À: "Debian" Envoyé: Lundi 6 Août 2018 17:18:18 Objet: 2 Cartes réseau dont une dédié au multicast. Bonjour, Je souhaite disposer de 2 cartes réseau pour en dédiée une à un flux multicast. Je n'arrive pas à configurer la deuxième carte de façon à ce qu'elle lise le flux multicast alors que la carte par défaut y arrive. Le contexte : utilisation d'un émetteur HDMI sur Ethernet en multicast, le LKV373A de LENKENG, décrit dans "Hackable Magazine" N°23 de mars-avril 2018, sous Debian Stretch. Adjonction d'une seconde carte PCI TP-LINK Gigabit TG-3269 identifiée comme "enp5s0". La carte par défaut est "enp0s31f6" qui sert à l'accès Internet. Pour la seconde carte réseau ajoutée, ma configuration dans /etc/network/interfaces: auto enp5s0 iface enp5s0 inet static address 192.168.1.75 netmask 255.255.255.0 network 192.168.1.0 gateway 192.168.1.254 Avec la carte réseau principale, l'accès avec VLC se fait avec l'URL : udp://@:5004 $> tcpdump -i enp0s31f6 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on enp0s31f6, link-type EN10MB (Ethernet), capture size 262144 bytes 16:55:32.916811 IP 192.168.1.238.5004 > 239.255.42.42.5004: UDP, length 1316 Le redémarrage complet des service réseau est fait par : systemctl restart networking.service NetworkManager.service $> tcpdump -i enp5s0 15:37:31.044606 IP 192.168.1.238.5004 > 239.255.42.42.5004: UDP, length 1316 J'utilise VLC pour la lecture du flux avec les URL "udp://@:5004" ou "udp://@:5004 Même avec la carte secondaire seulement, impossible de lire le flux sur celle-ci. bonjour, serait il possible de passer par wondershaper (?) : https://documentation.online.net/fr/dedicated-server/tutorials/network/configure-wondershaper merci slt bernard Bonjour Bernard, Le débit vidéo doit "normalement" passer le format 4K pour la vidéo. À quel débit cela peut-il correspondre ? Quel avantage vois-tu à modifier les débits des interfaces réseau ? Merci.
Re: Asck some information for start to help Debian
On 8/6/18, to...@tuxteam.de wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > On Mon, Aug 06, 2018 at 11:43:30AM +0200, Ehsan Esteki wrote: >> Hello, >> My name is Ehsan Esteki from Italy. I would like help you to translate >> your guide and wiki in Farsi Language ( Iranian language). >> I would like how can i start to do this for you if is possible and if >> you need my help. >> I wait possibly your feedback. >> Thanks. > > The Debian internationalization info seems to be centralized in this > page: > > https://www.debian.org/international/ > > Specifically, if you want to translate the wiki, this seems relevant: > > https://wiki.debian.org/DebianWiki/EditorGuide#Translations > > Perhaps there's someone more into it and can provide more details. > > Thanks for considering doing this work! Your thought triggered the thought that Debian-Publicity can always use help translating... well... publicity, e.g. related blog posts. :) https://lists.debian.org/debian-publicity/ If one follows that list long enough, you'll see shoutouts with requests for translations that really need to be done almost immediately. Cindy :) -- Cindy-Sue Causey Talking Rock, Pickens County, Georgia, USA * runs with duct tape *
Re: 2 Cartes réseau dont une dédié au multicast.
- Mail original - > De: "Randy11" > À: "Debian" > Envoyé: Lundi 6 Août 2018 17:18:18 > Objet: 2 Cartes réseau dont une dédié au multicast. > > Bonjour, > > Je souhaite disposer de 2 cartes réseau pour en dédiée une à un flux > multicast. > Je n'arrive pas à configurer la deuxième carte de façon à ce qu'elle > lise le flux > multicast alors que la carte par défaut y arrive. > > Le contexte : utilisation d'un émetteur HDMI sur Ethernet en > multicast, > le LKV373A de LENKENG, décrit dans "Hackable Magazine" N°23 de > mars-avril 2018, sous Debian > Stretch. Adjonction d'une seconde carte PCI TP-LINK Gigabit TG-3269 > identifiée comme > "enp5s0". La carte par défaut est "enp0s31f6" qui sert à l'accès > Internet. > > Pour la seconde carte réseau ajoutée, ma configuration dans > /etc/network/interfaces: > auto enp5s0 > iface enp5s0 inet static >address 192.168.1.75 >netmask 255.255.255.0 >network 192.168.1.0 >gateway 192.168.1.254 > > Avec la carte réseau principale, l'accès avec VLC se fait avec l'URL > : > udp://@:5004 > $> tcpdump -i enp0s31f6 > tcpdump: verbose output suppressed, use -v or -vv for full protocol > decode > listening on enp0s31f6, link-type EN10MB (Ethernet), capture size > 262144 > bytes > 16:55:32.916811 IP 192.168.1.238.5004 > 239.255.42.42.5004: UDP, > length 1316 > > Le redémarrage complet des service réseau est fait par : > systemctl restart networking.service NetworkManager.service > > $> tcpdump -i enp5s0 > 15:37:31.044606 IP 192.168.1.238.5004 > 239.255.42.42.5004: UDP, > length 1316 > > J'utilise VLC pour la lecture du flux avec les URL "udp://@:5004" ou > "udp://@:5004 > > Même avec la carte secondaire seulement, impossible de lire le flux > sur > celle-ci. > > Merci pour votre aide. > > Bonne journée. > > Randy11 > > bonjour, serait il possible de passer par wondershaper (?) : https://documentation.online.net/fr/dedicated-server/tutorials/network/configure-wondershaper merci slt bernard
2 Cartes réseau dont une dédié au multicast.
Bonjour, Je souhaite disposer de 2 cartes réseau pour en dédiée une à un flux multicast. Je n'arrive pas à configurer la deuxième carte de façon à ce qu'elle lise le flux multicast alors que la carte par défaut y arrive. Le contexte : utilisation d'un émetteur HDMI sur Ethernet en multicast, le LKV373A de LENKENG, décrit dans "Hackable Magazine" N°23 de mars-avril 2018, sous Debian Stretch. Adjonction d'une seconde carte PCI TP-LINK Gigabit TG-3269 identifiée comme "enp5s0". La carte par défaut est "enp0s31f6" qui sert à l'accès Internet. Pour la seconde carte réseau ajoutée, ma configuration dans /etc/network/interfaces: auto enp5s0 iface enp5s0 inet static address 192.168.1.75 netmask 255.255.255.0 network 192.168.1.0 gateway 192.168.1.254 Avec la carte réseau principale, l'accès avec VLC se fait avec l'URL : udp://@:5004 $> tcpdump -i enp0s31f6 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on enp0s31f6, link-type EN10MB (Ethernet), capture size 262144 bytes 16:55:32.916811 IP 192.168.1.238.5004 > 239.255.42.42.5004: UDP, length 1316 Le redémarrage complet des service réseau est fait par : systemctl restart networking.service NetworkManager.service $> tcpdump -i enp5s0 15:37:31.044606 IP 192.168.1.238.5004 > 239.255.42.42.5004: UDP, length 1316 J'utilise VLC pour la lecture du flux avec les URL "udp://@:5004" ou "udp://@:5004 Même avec la carte secondaire seulement, impossible de lire le flux sur celle-ci. Merci pour votre aide. Bonne journée. Randy11
Re: Asck some information for start to help Debian
Hellow!!! Ehsan^^^ Ehsan Esteki writes: > Hello, > My name is Ehsan Esteki from Italy. I would like help you to translate > your guide and wiki in Farsi Language ( Iranian language). > I would like how can i start to do this for you if is possible and if > you need my help. > I wait possibly your feedback. Plus, debian-...@lists.debian.org is your friend. Sincerely, Byung-Hee. -- ^고맙습니다 _地平天成_ 감사합니다_^))//
Re: If not "newbie" then ????
On 08/06/2018 08:19 AM, Richard Owlett wrote:
On 08/05/2018 10:28 PM, songbird wrote:
Richard Owlett wrote:
On 07/21/2018 04:46 PM, cyaiplexys wrote:
Try CherryTree. I use that program for everything. It's cross-platform.
I download it from the web site instead of using the version in the
Debian Repo as the latest version fixes some annoying bugs (of which I
kinda forgot what but would quickly be reminded if I used the repo
version).
I think that would be useful for categorizing questions and you can
even
search through them. If you want to save to PDF or HTML, it can export
to those formats as well.
I've used CherryTree for everything from keeping code snippets to
installation instructions to writing up tutorials (and exporting to
HTML).
I've installed CherryTree 0.38.5 from their site.
It can do everything I need *IF* I manually enter all the data.
I'm trying to import a large set of SeaMonkey bookmarks (a SQLite file).
When using SQLite commands I can create a CSV file with only the
information of interest.
The CherryTree 0.38.5 manual explicitly states that CSV can be imported.
But there is no menu item in the actual program.
The CSV has the required information to describe the node/sub-node
structure in explicit detail.
Suggestions?
learn how to search?
i found this within a few seconds:
http://giuspen.com/cherrytreemanual/Inserting_Objects--From_the_Toolbar--Tables.html
seems simple enough...
In this case my search skills were adequate.
My reading skills however? ;{
I wasn't interested in a "table" per se.
The CSV file has all the information required for a CherryTree
hierarchical file. So I had assumed (wrongly) that there was a CSV to
ctb format conversion. Also a closer look demonstrated misunderstanding
of how SeaMonkey handles it's data internally and why the JSON file has
some features I found annoying. But, along with a hint from an unrelated
thread, *MY* problem may be tractable.
My cage has been beneficently rattled ;}
The JSON file exported by SeaMonkey has too much of no interest.
I had given up on working with JSON data directly.
I did a web search for the combination of "sql" and "json".
That led to jq [https://stedolan.github.io/jq/] which led to a slightly
different search with Synaptic. That led to "SQLite ODBC Driver"
[http://www.ch-werner.de/sqliteodbc/].
I've not laid out the intermediate steps in detail.
However something like this seems possible:
1. Export SeaMonkey bookmarks in JSON format.
2. Clean it with jq.
3. Use some tool/script to emit CSV.
4. Edit with spreadsheet of choice, emitting CSV.
5. Create JSON file acceptable to SeaMonkey.
[That may require creating dummy data for items disposed of in #2.]
Re: Sin espacio en particion
El 6 de agosto de 2018, 10:50, Ramses escribió: > El 6 de agosto de 2018 15:00:54 CEST, "Fabián Bonetti" < > mama21m...@riseup.net> escribió: > > > > > > > > > > > >##Servidor Debian vivo desde 2009##Friendica > > >https://friendica.mamalibre.com.arWhatsapp libre > > >http://xmpp.mamalibre.com.arHosting free > > >http://sitios.mamalibre.com.arGnusocial > > >http://legadolibre.mamalibre.com.arPlus > > >http://mamalibre.com.ar/plus### > > > > Mensaje original De: Matias Mucciolo > > Fecha: 6/8/2018 9:04 (GMT-03:00) Para: > >debian-user-spanish@lists.debian.org Cc: Fabián Bonetti > > Asunto: Re: Sin espacio en particion > > > >On Saturday, August 4, 2018 11:39:13 AM -03 Fabián Bonetti wrote: > >> Hola, tengo dos servicios que ocupan disco duro, Openfire y MariaDB > >> > >> disco duro 1 > >> /var/lib/openfire > >> /var/lib/mysql > >> > >> lei algo en esta lista de montarlo con mount bind > >> > >> cosa que lo hice en el /etc/fstab > >> > >> /var/lib/mysql/media/Disco160/www/bd/mysqlnonebind0 0 > >> /var/lib/openfire /media/Disco160/openfire/openfire nonebind0 > >0 > >> > >> pero por mas que haga eso de montarlo en el disco duro 2 > >> > >> me sigue apareciendo poco espacio en disco duro 1. > >> > >> > >> > >> -- > >> Servicios:. http://mamalibre.com.ar/plus > >> MamaLibre, Casa en Lincoln, Ituzaingo 1085 CP6070, Buenos Aires, > >Argentina > > > >Buenas > > > >a ver... esta bien montar con bind y es muy útil como estos casos > >el tema es que el tamaño del disco no te va aumentar en ningún momento > >por hacer un mount.. > > > >es decir en pocas palabra...el tamaño libre que tenes en disco 01 que > >supongo > >que es de 160g va a ser el mismo antes y después de montarlo... > > > >ahora que estas tratando de solucionar ? o que te preocupa ? > >pasa un df -h e indícanos mejor el problema. > > > >saludos > >Matias > >-- > >Hola matiases que me queda poco espacio en el disco1 donde tengo > >/var > >Y mount no sirve para montar esa carpeta en disco2. > >La idea es ganar espacio donde tengo /var. Poner esa carpeta en el > >disco2 > > > >Saludos > > ¿Y si mueves /var al disco 2 y en el disco1 creas un enlace simbólico > "var" en / que apunte al /var del disco2 recién movido? > > > Saludos, > > Ramsés > > Pregunta cuando intentaste montar el disco 2 en var moviste los archivos de /var origina al disco 2? y cuando intentaste montar el directorio /var estaba vacio? -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos,
Re: Sin espacio en particion
El 6 de agosto de 2018 15:00:54 CEST, "Fabián Bonetti" escribió: > > > > > >##Servidor Debian vivo desde 2009##Friendica > >https://friendica.mamalibre.com.arWhatsapp libre > >http://xmpp.mamalibre.com.arHosting free > >http://sitios.mamalibre.com.arGnusocial > >http://legadolibre.mamalibre.com.arPlus > >http://mamalibre.com.ar/plus### > > Mensaje original De: Matias Mucciolo > Fecha: 6/8/2018 9:04 (GMT-03:00) Para: >debian-user-spanish@lists.debian.org Cc: Fabián Bonetti > Asunto: Re: Sin espacio en particion > >On Saturday, August 4, 2018 11:39:13 AM -03 Fabián Bonetti wrote: >> Hola, tengo dos servicios que ocupan disco duro, Openfire y MariaDB >> >> disco duro 1 >> /var/lib/openfire >> /var/lib/mysql >> >> lei algo en esta lista de montarlo con mount bind >> >> cosa que lo hice en el /etc/fstab >> >> /var/lib/mysql /media/Disco160/www/bd/mysql none bind 0 0 >> /var/lib/openfire /media/Disco160/openfire/openfire none bind 0 >0 >> >> pero por mas que haga eso de montarlo en el disco duro 2 >> >> me sigue apareciendo poco espacio en disco duro 1. >> >> >> >> -- >> Servicios:. http://mamalibre.com.ar/plus >> MamaLibre, Casa en Lincoln, Ituzaingo 1085 CP6070, Buenos Aires, >Argentina > >Buenas > >a ver... esta bien montar con bind y es muy útil como estos casos >el tema es que el tamaño del disco no te va aumentar en ningún momento >por hacer un mount.. > >es decir en pocas palabra...el tamaño libre que tenes en disco 01 que >supongo >que es de 160g va a ser el mismo antes y después de montarlo... > >ahora que estas tratando de solucionar ? o que te preocupa ? >pasa un df -h e indícanos mejor el problema. > >saludos >Matias >-- >Hola matiases que me queda poco espacio en el disco1 donde tengo >/var >Y mount no sirve para montar esa carpeta en disco2. >La idea es ganar espacio donde tengo /var. Poner esa carpeta en el >disco2 > >Saludos ¿Y si mueves /var al disco 2 y en el disco1 creas un enlace simbólico "var" en / que apunte al /var del disco2 recién movido? Saludos, Ramsés
Re: If not "newbie" then ????
On 08/05/2018 10:28 PM, songbird wrote:
Richard Owlett wrote:
On 07/21/2018 04:46 PM, cyaiplexys wrote:
Try CherryTree. I use that program for everything. It's cross-platform.
I download it from the web site instead of using the version in the
Debian Repo as the latest version fixes some annoying bugs (of which I
kinda forgot what but would quickly be reminded if I used the repo
version).
I think that would be useful for categorizing questions and you can even
search through them. If you want to save to PDF or HTML, it can export
to those formats as well.
I've used CherryTree for everything from keeping code snippets to
installation instructions to writing up tutorials (and exporting to HTML).
I've installed CherryTree 0.38.5 from their site.
It can do everything I need *IF* I manually enter all the data.
I'm trying to import a large set of SeaMonkey bookmarks (a SQLite file).
When using SQLite commands I can create a CSV file with only the
information of interest.
The CherryTree 0.38.5 manual explicitly states that CSV can be imported.
But there is no menu item in the actual program.
The CSV has the required information to describe the node/sub-node
structure in explicit detail.
Suggestions?
learn how to search?
i found this within a few seconds:
http://giuspen.com/cherrytreemanual/Inserting_Objects--From_the_Toolbar--Tables.html
seems simple enough...
In this case my search skills were adequate.
My reading skills however? ;{
I wasn't interested in a "table" per se.
The CSV file has all the information required for a CherryTree
hierarchical file. So I had assumed (wrongly) that there was a CSV to
ctb format conversion. Also a closer look demonstrated misunderstanding
of how SeaMonkey handles it's data internally and why the JSON file has
some features I found annoying. But, along with a hint from an unrelated
thread, *MY* problem may be tractable.
Re: Sin espacio en particion
##Servidor Debian vivo desde 2009##Friendica > https://friendica.mamalibre.com.arWhatsapp libre > http://xmpp.mamalibre.com.arHosting free > http://sitios.mamalibre.com.arGnusocial > http://legadolibre.mamalibre.com.arPlus > http://mamalibre.com.ar/plus### Mensaje original De: Matias Mucciolo Fecha: 6/8/2018 9:04 (GMT-03:00) Para: debian-user-spanish@lists.debian.org Cc: Fabián Bonetti Asunto: Re: Sin espacio en particion On Saturday, August 4, 2018 11:39:13 AM -03 Fabián Bonetti wrote: > Hola, tengo dos servicios que ocupan disco duro, Openfire y MariaDB > > disco duro 1 > /var/lib/openfire > /var/lib/mysql > > lei algo en esta lista de montarlo con mount bind > > cosa que lo hice en el /etc/fstab > > /var/lib/mysql /media/Disco160/www/bd/mysql none bind 0 0 > /var/lib/openfire /media/Disco160/openfire/openfire none bind 0 0 > > pero por mas que haga eso de montarlo en el disco duro 2 > > me sigue apareciendo poco espacio en disco duro 1. > > > > -- > Servicios:. http://mamalibre.com.ar/plus > MamaLibre, Casa en Lincoln, Ituzaingo 1085 CP6070, Buenos Aires, Argentina Buenas a ver... esta bien montar con bind y es muy útil como estos casos el tema es que el tamaño del disco no te va aumentar en ningún momento por hacer un mount.. es decir en pocas palabra...el tamaño libre que tenes en disco 01 que supongo que es de 160g va a ser el mismo antes y después de montarlo... ahora que estas tratando de solucionar ? o que te preocupa ? pasa un df -h e indícanos mejor el problema. saludos Matias -- Hola matiases que me queda poco espacio en el disco1 donde tengo /var Y mount no sirve para montar esa carpeta en disco2. La idea es ganar espacio donde tengo /var. Poner esa carpeta en el disco2 Saludos
Re: (solved)Re: can't install jmtpfs of stretch(i386)
On Sun, Aug 05, 2018 at 01:10:31PM +, T BkRl wrote: > Pascal, top reply is the default on many clients and web mail. I’m on my > iPhone using MS Outlook and it doesn’t let you choose where to put the cursor > relative to the reply text. Then stop using that.
Re: Sin espacio en particion
On Saturday, August 4, 2018 11:39:13 AM -03 Fabián Bonetti wrote: > Hola, tengo dos servicios que ocupan disco duro, Openfire y MariaDB > > disco duro 1 > /var/lib/openfire > /var/lib/mysql > > lei algo en esta lista de montarlo con mount bind > > cosa que lo hice en el /etc/fstab > > /var/lib/mysql/media/Disco160/www/bd/mysqlnonebind0 0 > /var/lib/openfire /media/Disco160/openfire/openfire nonebind0 0 > > pero por mas que haga eso de montarlo en el disco duro 2 > > me sigue apareciendo poco espacio en disco duro 1. > > > > -- > Servicios:. http://mamalibre.com.ar/plus > MamaLibre, Casa en Lincoln, Ituzaingo 1085 CP6070, Buenos Aires, Argentina Buenas a ver... esta bien montar con bind y es muy útil como estos casos el tema es que el tamaño del disco no te va aumentar en ningún momento por hacer un mount.. es decir en pocas palabra...el tamaño libre que tenes en disco 01 que supongo que es de 160g va a ser el mismo antes y después de montarlo... ahora que estas tratando de solucionar ? o que te preocupa ? pasa un df -h e indícanos mejor el problema. saludos Matias
Re: Network configuration
On 8/6/2018 12:12 PM, Ilyass Kaouam wrote: I configured my network here (see attached picture please) [image: Capture d’écran 2018-08-06 à 12.12.06.png] I don't have access to images. What is the output of: $ cat /etc/resolv.conf -- John Doe
Re: Routing all traffic trough VPN
On Mon, Aug 06, 2018 at 11:24:21AM +0100, Joe wrote: > On Mon, 6 Aug 2018 09:48:02 - (UTC) > zaxonxp wrote: > > > Hi, > > > > On Debian Stretch I managed to configure VPN connection using network- > > manager. Now I would like to redirect all traffic to VPN (whenever > > VPN is available) and revert back to current state (if VPN is not > > available). > > > > The only problem is that I do not know how to do this. > > I believe it should happen by default, this is almost always what you > want. I'm fairly sure I've never had to ask for this. > > When the VPN connects, Network Manager should adjust routing so that > the VPN becomes the default gateway. To disable this behaviour, there > is a tick box somewhere in IP properties of the VPN connection, I think. > That is usually something that is managed by the VPN server pushing a default route to the client. However, please note that network-manager handling of DNS is still likely to leak DNS queries to DNS servers outside of the VPN. This was recently discussed in this thread: https://lists.debian.org/debian-user/2018/07/msg01012.html Regards, -Roberto -- Roberto C. Sánchez
Re: Routing all traffic trough VPN
On Mon, 6 Aug 2018 09:48:02 - (UTC) zaxonxp wrote: > Hi, > > On Debian Stretch I managed to configure VPN connection using network- > manager. Now I would like to redirect all traffic to VPN (whenever > VPN is available) and revert back to current state (if VPN is not > available). > > The only problem is that I do not know how to do this. I believe it should happen by default, this is almost always what you want. I'm fairly sure I've never had to ask for this. When the VPN connects, Network Manager should adjust routing so that the VPN becomes the default gateway. To disable this behaviour, there is a tick box somewhere in IP properties of the VPN connection, I think. -- Joe
Re: Asck some information for start to help Debian
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Mon, Aug 06, 2018 at 11:43:30AM +0200, Ehsan Esteki wrote: > Hello, > My name is Ehsan Esteki from Italy. I would like help you to translate > your guide and wiki in Farsi Language ( Iranian language). > I would like how can i start to do this for you if is possible and if > you need my help. > I wait possibly your feedback. > Thanks. The Debian internationalization info seems to be centralized in this page: https://www.debian.org/international/ Specifically, if you want to translate the wiki, this seems relevant: https://wiki.debian.org/DebianWiki/EditorGuide#Translations Perhaps there's someone more into it and can provide more details. Thanks for considering doing this work! Cheers - -- tomás -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.12 (GNU/Linux) iEYEARECAAYFAltoIBsACgkQBcgs9XrR2kaJJgCeM4/fkigtD9X+PSOngyEff/FG UKgAmwbPDKkJeym5K1Po21m0wceykDHK =qd5u -END PGP SIGNATURE-
Re: Asck some information for start to help Debian
On 8/6/2018 11:43 AM, Ehsan Esteki wrote: Hello, My name is Ehsan Esteki from Italy. I would like help you to translate your guide and wiki in Farsi Language ( Iranian language). I would like how can i start to do this for you if is possible and if you need my help. I wait possibly your feedback. You could start here: https://www.debian.org/international/ -- John Doe
Asck some information for start to help Debian
Hello, My name is Ehsan Esteki from Italy. I would like help you to translate your guide and wiki in Farsi Language ( Iranian language). I would like how can i start to do this for you if is possible and if you need my help. I wait possibly your feedback. Thanks. -- Ehsan Esteki
Routing all traffic trough VPN
Hi, On Debian Stretch I managed to configure VPN connection using network- manager. Now I would like to redirect all traffic to VPN (whenever VPN is available) and revert back to current state (if VPN is not available). The only problem is that I do not know how to do this. Kind regads, Piotr
Routing all traffic trough VPN
Hi, On Debian Stretch I managed to configure VPN connection using network- manager. Now I would like to redirect all traffic to VPN (whenever VPN is available) and revert back to current state (if VPN is not available). The only problem is that I do not know how to do this. Kind regads, Piotr
Routing all traffic trough VPN
[This mail was also posted to linux.debian.user.] Hi, On Debian Stretch I managed to configure VPN connection using network- manager. Now I would like to redirect all traffic to VPN (whenever VPN is available) and revert back to current state (if VPN is not available). The only problem is that I do not know how to do this. Kind regads, Piotr
Re: Network configuration
On 8/6/2018 11:16 AM, Ilyass Kaouam wrote: Thank you for all your reply, I configured the network via the GUI during installation, the network works perfectly. I just want to know if I want to change the address or ..., without going through the GUI, where I can make my changes, knowing that the To answer that question we/you need to know what app is configuring your interfaces. Then you can reed how to configure that app through CLI/config file. -- John Doe
Re: Network configuration
Thank you for all your reply, I configured the network via the GUI during installation, the network works perfectly. I just want to know if I want to change the address or ..., without going through the GUI, where I can make my changes, knowing that the /etc/network/interfaces file does not contain my configuration : # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback Le lun. 6 août 2018 à 10:30, Curt a écrit : > On 2018-08-06, Joe wrote: > > On Mon, 6 Aug 2018 04:01:44 -0400 > > Jude DaShiell wrote: > > > >> If you do a command line install with no graphics, you end up with no > >> network configuration once installation completes. > > > > Not in my experience. > > > > At one time, if you did a non-expert install with no network DHCP > > server, then you got no networking, even after a netinstall. It bit me > > around the time of etch or lenny. I've no idea if it's still true today. > > > > I think there's only one Brian over there in the UK somewhere, and here's > what > he said a year back that pertains (if the bug still kicks) to whatever it > is we're talking about here (in the interests of precision and clarity): > > netcfg sets up the network during installation and writes a temporary > /e/n/i stanza. If a user installs a DE and n-m is installed the stanza > is not copied to /target, the assumption being, I suppose, that the user > would want n-m to handle the network. This happens when either a wired > or wireless connection is used to install. > > If the user uses a cabled connection but does not select a DE the stanza > is copied to /target. > > If a user has a wireless connection but does not select a DE the stanza > is not copied to /target but rewritten to contain loopback only and then > copied over. On first boot there is no external connectivity. Your guess > is as good as mine why a wireless installation is treated differently > from a cabled one. I have never seen any adequate justification for > denying external connectivity in this circumstance. > > So it is the experience of wireless people, I guess. > > -- > Some years ago, when the images which this world affords first opened upon > me, > when I felt the cheering warmth of summer and heard the rustling of the > leaves > and the warbling of the birds, and these were all to me, I should have > wept to > die; now it is my only consolation. --Mary Shelley, Frankenstein; or, The > Modern Prometheus > > -- *Ilyass kaouam* *Systems administrator* * Mastère européen Manager de Projets Informatiques*
Re: Démarrage d'un pc à une heure programmée
Le 06/08/2018 à 07:29, hamster a écrit : Le 06/08/2018 à 05:38, Bernard Schoenacker a écrit : - Mail original - De: "philolilou" À:debian-user-french@lists.debian.org Envoyé: Dimanche 5 Août 2018 22:17:59 Objet: Démarrage d'un pc à une heure programmée Bonjour, dans le cadre de sauvegardes automatiques, je cherche un programme ou un moyen de démarrer un pc éteint à une certaine heure. Je sais qu'il existe le wake on lan pour réveiller un pc depuis le réseau, cependant, vu les températures, l'idéal serait d'éviter de faire fonctionner un autre PC, juste pour allumer un pc pour faire des sauvegardes... Auriez-vous une idée? Je vous remercie d'avance pour vos réponses. bonjour, pour réaliser les opérations de sauvegarde, pourquoi ne pas employer une framboise pour réveiller les autres ordi ? la vidéo : https://www.instructables.com/id/Raspberry-Pi-As-Wake-on-LAN-Server/ Une recherche avec "wake on lan arduino" donne aussi des résultats. Je suis pas allé lire ces résultats en détail pour voir si concrètement ca marche. Plus petit, consomme moins de courant en fonctionnement, consomme moins de ressources a la fabrication qu'un framboise-pi. La framboise est un peu overkill pour juste envoyer un paquet sur le réseau a une heure programmée. Et pour consommer encore moins, une horloge (à très faible consommation) qui actionne une coupure secteur via un relais LATCH. Si le BIOS du PC est réglé sur mise en marche au retour du courant, il s'allume. A la fin de la sauvegarde, le PC s'éteint. Il sera réveillé à la prochaine bascule du relais ON-OFF-ON (un relais à verrouillage n'a besoin que d'une impulsion pour changer d'état)
Re: Network configuration
On 2018-08-06, Joe wrote: > On Mon, 6 Aug 2018 04:01:44 -0400 > Jude DaShiell wrote: > >> If you do a command line install with no graphics, you end up with no >> network configuration once installation completes. > > Not in my experience. > > At one time, if you did a non-expert install with no network DHCP > server, then you got no networking, even after a netinstall. It bit me > around the time of etch or lenny. I've no idea if it's still true today. > I think there's only one Brian over there in the UK somewhere, and here's what he said a year back that pertains (if the bug still kicks) to whatever it is we're talking about here (in the interests of precision and clarity): netcfg sets up the network during installation and writes a temporary /e/n/i stanza. If a user installs a DE and n-m is installed the stanza is not copied to /target, the assumption being, I suppose, that the user would want n-m to handle the network. This happens when either a wired or wireless connection is used to install. If the user uses a cabled connection but does not select a DE the stanza is copied to /target. If a user has a wireless connection but does not select a DE the stanza is not copied to /target but rewritten to contain loopback only and then copied over. On first boot there is no external connectivity. Your guess is as good as mine why a wireless installation is treated differently from a cabled one. I have never seen any adequate justification for denying external connectivity in this circumstance. So it is the experience of wireless people, I guess. -- Some years ago, when the images which this world affords first opened upon me, when I felt the cheering warmth of summer and heard the rustling of the leaves and the warbling of the birds, and these were all to me, I should have wept to die; now it is my only consolation. --Mary Shelley, Frankenstein; or, The Modern Prometheus
Re: Network configuration
On Mon, 6 Aug 2018 04:01:44 -0400 Jude DaShiell wrote: > If you do a command line install with no graphics, you end up with no > network configuration once installation completes. Not in my experience. At one time, if you did a non-expert install with no network DHCP server, then you got no networking, even after a netinstall. It bit me around the time of etch or lenny. I've no idea if it's still true today. -- Joe
Re: Network configuration
If you do a command line install with no graphics, you end up with no network configuration once installation completes.I left some writing on wiki.debian.org for how to configure wifi to work for command line installs on post-install boot and that uses ifup and ifdown. I don't know what happened to the text on that site since I put it up in pure ascii without any markup editing. If need be, I think I can find it among my files here. On Mon, 6 Aug 2018, john doe wrote: > Date: Mon, 6 Aug 2018 02:02:52 > From: john doe > To: debian-user@lists.debian.org > Subject: Re: Network configuration > Resent-Date: Mon, 6 Aug 2018 06:03:15 + (UTC) > Resent-From: debian-user@lists.debian.org > > On 8/6/2018 1:53 AM, Ilyass Kaouam wrote: > > If I choose to configure the network during installation, where can I > > configure the network after? > > on which file, because in /etc/network/interfaces I don't see the ip > > address, subnetwork ... > > > > It depends which pkg you choose to install during installation. > If you selected a desktop manager (gnome, mate ...) it is most likely that > NetworkManager (NM), WICD or or similar apps is installed. > > For some hints of what is configuring your interfaces you might look at the > top of: > > /etc/resolv.conf > > --
Re: Can't play Steam games
On 08/05/2018 12:26 PM, Jose G. López wrote: On Sat, 4 Aug 2018 15:24:51 -0400 Ric Moore wrote: On 08/04/2018 02:30 PM, Jose G. López wrote: On Sat, 4 Aug 2018 13:28:13 -0400 Ric Moore wrote: Enter this: in a terminal: inxi -SGx What do you get?? Ric Hi Ric, I get this: -- $ inxi -SGx System:Host: pc-debian Kernel: 4.17.0-1-amd64 x86_64 bits: 64 compiler: gcc v: 7.3.0 Desktop: Xfce 4.12.4 Distro: Debian GNU/Linux buster/sid Graphics: Card-1: NVIDIA GM107 [GeForce GTX 750 Ti] driver: nvidia v: 390.77 bus ID: 02:00.0 Display: x11 server: X.Org 1.20.0 driver: nvidia resolution: 1920x1080~60Hz OpenGL: renderer: llvmpipe (LLVM 6.0 128 bits) v: 3.3 Mesa 18.1.5 direct render: Yes -- It doesn't note that a driver is installed. So, if you have the nvidia driver installed directly from nvidia, remove it. From a terminal run "locate nvidia", you might have to remove those files by hand IF you directly installed the driver from the nvidia website. Next, run software updater (it's in your XFCE system menu tab) and let it install your driver for you. Before you reboot, run /usr/bin/nvidia-xconfig to create the /etc/X11/xorg.conf file for you. Then a reboot should have you up and running. I HOPE this helps. Ric Hi Ric, I always use nvidia driver from Debian but strangely OpenGL renderer in use was Mesa (I didn't noticed when pasted the output). Don't know which upgrade changed that. That should be the problem. I have purged nvidia completly and installed again with: $ sudo aptitude install nvidia-driver nvidia-settings libgl1-nvidia-glx libgl1-nvidia-glx:i386 libnvidia-glcore:i386 Those latest packages installs non-GLVND OpenGL/GLX/EGL/GLES 32-bit libraries which I think work better with old games. Now I get: $ inxi -SGx System:Host: pc-debian Kernel: 4.17.0-1-amd64 x86_64 bits: 64 compiler: gcc v: 7.3.0 Desktop: Xfce 4.12.4 Distro: Debian GNU/Linux buster/sid Graphics: Card-1: NVIDIA GM107 [GeForce GTX 750 Ti] driver: nvidia v: 390.77 bus ID: 02:00.0 Display: x11 server: X.Org 1.20.0 driver: nvidia unloaded: modesetting resolution: 1920x1080~60Hz OpenGL: renderer: GeForce GTX 750 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 390.77 direct render: Yes Tried some games and are loading and running fine. Thank you! Great to hear!! I'm running two GeForce GTX 1050 Ti cards to 3 monitors. Using xinerama I have one display of 5760x1080 pixels across the three. I love my nVidia drivers. Ric -- My father, Victor Moore (Vic) used to say: "There are two Great Sins in the world... ..the Sin of Ignorance, and the Sin of Stupidity. Only the former may be overcome." R.I.P. Dad. http://linuxcounter.net/user/44256.html
Re: Démarrage d'un pc à une heure programmée
❦ 5 août 2018 22:17 +0200, philolilou : > dans le cadre de sauvegardes automatiques, je cherche un programme ou > un moyen de démarrer un pc éteint à une certaine heure. > > Je sais qu'il existe le wake on lan pour réveiller un pc depuis le > réseau, cependant, vu les températures, l'idéal serait d'éviter de > faire fonctionner un autre PC, juste pour allumer un pc pour faire des > sauvegardes... Avec systemd, les timers ont déjà cette fonctionnalité. Voir "WakeSystem=" dans la page de manuel de systemd.timer(5). Sans systemd, l'utilitaire rtcwake permet de programmer un réveil. -- A man was reading The Canterbury Tales one Saturday morning, when his wife asked "What have you got there?" Replied he, "Just my cup and Chaucer." signature.asc Description: PGP signature
Re: Network configuration
On 8/6/2018 1:53 AM, Ilyass Kaouam wrote: If I choose to configure the network during installation, where can I configure the network after? on which file, because in /etc/network/interfaces I don't see the ip address, subnetwork ... It depends which pkg you choose to install during installation. If you selected a desktop manager (gnome, mate ...) it is most likely that NetworkManager (NM), WICD or or similar apps is installed. For some hints of what is configuring your interfaces you might look at the top of: /etc/resolv.conf -- John Doe
