cronjob problem
Hallo, could someone please explain me why the following cronjob generates an empy file when copy-pasting the command to console generates a full file? It's in roots crontab created with crontab -e 00 21 * * * /usr/local/ldap/sbin/slapcat /var/backups/ldap/dumps/slapdump.`date +\%g\%m\%d_\%k:\%M` Debian version is etch. tia, angela -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cronjob problem - Solved
On Thursday 27 September 2007 12:38:59 André Berger wrote: * Angela Gavazzi (2007-09-27): Hallo, could someone please explain me why the following cronjob generates an empy file when copy-pasting the command to console generates a full file? It's in roots crontab created with crontab -e 00 21 * * * /usr/local/ldap/sbin/slapcat /var/backups/ldap/dumps/slapdump.`date +\%g\%m\%d_\%k:\%M` Debian version is etch. /path/to/date -André! Thank you! Angela -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Mouse freezing
Am Donnerstag, 12. April 2007 18:15 schrieb Kent West: On 4/12/07, Angela Gavazzi [EMAIL PROTECTED] wrote: Hallo! I have a strange problem with the mouse freezing on an Asus L5000. I experienced the mouse freezing on every installation I did, so I don't think it's a version or distro problem. Interesting thing is that, if I plug the mouse out and in again, dmesg shows it as it would work. It does not matter on what usb port I plug in. I cannot believe that the board should be fault again... especially as the mouse always works on windows... - I forgot that it is a dual boot install. (I've hesitated to reply, as I don't know what I'm talking about, but ...) When the mouse dies, switch to a terminal window and run cat /dev/input/mice and move your mouse around; does it produce garbage on the screen? (Ctrl-C to quit.) It should. If not, that indicates that the mouse driver is being unloaded at a fundamental level. My gut instinct is that something like udev is unloading the mouse after a while of inactivity; it should reload it, as I understand things, when needed. I tried it and absolutely no garbage was produced. How could I reload the mouse? I don't remember if the mouse only stops after inactivity... The TPad on /dev/psaux continues working. thanks angela -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Mouse freezing
Hallo! I have a strange problem with the mouse freezing on an Asus L5000. I am observing this for a long time now, and really don't have any more idea what the problem could be. The first install I did was sarge 64bit version, about 2 Years ago. As it was not stable enough and I could not get all things running (epson scanner) I switched to the 32bit version after a while After this I installed kubuntu breezy, made then an update to dapper. After this I was sure it's a hardwareproblem. Asus replaced the motherboard. After a short time (weeks) the mouse problem came again. Yesterday I installed etch, installation worked great, installed kde. This mornig I want to start working and after about 5 Min. my mouse freezed again. All other things work. I experienced the mouse freezing on every installation I did, so I don't think it's a version or distro problem. Interesting thing is that, if I plug the mouse out and in again, dmesg shows it as it would work. It does not matter on what usb port I plug in. I cannot believe that the board should be fault again... especially as the mouse always works on windows... - I forgot that it is a dual boot install. thanks i.a. Angela -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Etch stable - when?
Does anybody here know something more new than the informations from the debian site? July 24th, 2006 The Debian project confirms December 2006 as the date for the next release of its distribution which will be named Debian GNU/Linux 4.0 alias 'etch'. This will be the first official release to include the AMD64 architecture. The distribution will be released synchronously for 11 architectures in total. It's Januar 2007 now... Thanks angela -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
openldap crashed when syncrepl is activ
Hallo to all, I'm doing some testing with slapd (from testing, 2.3.25-1 ) and syncrepl. Syncrepl loads now, but every time I try to modify something, for example a telephoneNumber, the slapd crashes. If I deactivate syncrepl there is no problem. Can anybody tell me if it is a configuration error or a bug? Tia! Angela Here the debug output and my slapd.conf = access_allowed: auth access granted by auth(=xd) conn=8 op=0 BIND dn=cn=admin,dc=aag mech=SIMPLE ssf=0 send_ldap_result: err=0 matched= text= conn=8 op=0 RESULT tag=97 err=0 text= daemon: activity on 1 descriptor daemon: activity on: 11r daemon: read activity on 11 connection_get(11) ber_dump: buf=0x0819b090 ptr=0x0819b090 end=0x0819b0f9 len=105 : 02 01 02 66 44 04 1b 75 69 64 3d 63 6b 65 6e 74 ...fD..uid=ckent 0010: 2c 6f 75 3d 76 65 72 6b 61 75 66 2c 64 63 3d 61 ,ou=verkauf,dc=a 0020: 61 67 30 25 30 23 0a 01 02 30 1e 04 0f 74 65 6c ag0%0#...0...tel 0030: 65 70 68 6f 6e 65 4e 75 6d 62 65 72 31 0b 04 09 ephoneNumber1... 0040: 31 31 31 31 31 31 31 31 31 a0 1e 30 1c 04 17 32 1..0...2 0050: 2e 31 36 2e 38 34 30 2e 31 2e 31 31 33 37 33 30 .16.840.1.113730 0060: 2e 33 2e 34 2e 32 01 01 ff.3.4.2... daemon: select: listen=6 active_threads=0 tvp=NULL daemon: select: listen=7 active_threads=0 tvp=NULL ber_dump: buf=0x0819b090 ptr=0x0819b093 end=0x0819b0f9 len=102 : 66 44 04 1b 75 69 64 3d 63 6b 65 6e 74 2c 6f 75 fD..uid=ckent,ou 0010: 3d 76 65 72 6b 61 75 66 2c 64 63 3d 61 61 67 30 =verkauf,dc=aag0 0020: 25 30 23 0a 01 02 30 1e 04 0f 74 65 6c 65 70 68 %0#...0...teleph 0030: 6f 6e 65 4e 75 6d 62 65 72 31 0b 04 09 31 31 31 oneNumber1...111 0040: 31 31 31 31 31 31 a0 1e 30 1c 04 17 32 2e 31 36 11..0...2.16 0050: 2e 38 34 30 2e 31 2e 31 31 33 37 33 30 2e 33 2e .840.1.113730.3. 0060: 34 2e 32 01 01 ff 4.2... do_modify: dn (uid=ckent,ou=verkauf,dc=aag) ber_dump: buf=0x0819b090 ptr=0x0819b0b4 end=0x0819b0f9 len=69 : 30 23 0a 01 02 30 1e 04 0f 74 65 6c 65 70 68 6f 0#...0...telepho 0010: 6e 65 4e 75 6d 62 65 72 31 0b 04 09 31 31 31 31 neNumber1... 0020: 31 31 31 31 31 a0 1e 30 1c 04 17 32 2e 31 36 2e 1..0...2.16. 0030: 38 34 30 2e 31 2e 31 31 33 37 33 30 2e 33 2e 34 840.1.113730.3.4 0040: 2e 32 01 01 ff .2... ber_dump: buf=0x0819b090 ptr=0x0819b0db end=0x0819b0f9 len=30 : 30 1c 04 17 32 2e 31 36 2e 38 34 30 2e 31 2e 31 0...2.16.840.1.1 0010: 31 33 37 33 30 2e 33 2e 34 2e 32 01 01 ff 13730.3.4.2... ber_dump: buf=0x0819b090 ptr=0x0819b0f6 end=0x0819b0f9 len=3 : 00 01 ff ... = ldap_bv2dn(uid=ckent,ou=verkauf,dc=aag,0) = ldap_bv2dn(uid=ckent,ou=verkauf,dc=aag)=0 = ldap_dn2bv(272) = ldap_dn2bv(uid=ckent,ou=verkauf,dc=aag)=0 = ldap_dn2bv(272) = ldap_dn2bv(uid=ckent,ou=verkauf,dc=aag)=0 modifications: replace: telephoneNumber one value, length 9 conn=8 op=1 MOD dn=uid=ckent,ou=verkauf,dc=aag conn=8 op=1 MOD attr=telephoneNumber bdb_modify: uid=ckent,ou=verkauf,dc=aag = acl_access_allowed: granted to database root bdb_modify_internal: replace telephoneNumber bdb_modify_internal: replace entryCSN bdb_modify_internal: replace modifiersName bdb_modify_internal: replace modifyTimestamp send_ldap_result: err=0 matched= text= modifications: Speicherzugriffsfehler *** # This is the main slapd configuration file. See slapd.conf(5) for more # info on the configuration options. ### # Global Directives: # Features to permit #allow bind_v2 # Schema and objectClass definitions include /etc/ldap/schema/core.schema include /etc/ldap/schema/cosine.schema include /etc/ldap/schema/nis.schema include /etc/ldap/schema/inetorgperson.schema # Schema check allows for forcing entries to # match schemas for their objectClasses's schemacheck on # Where the pid file is put. The init.d script # will not stop the server if you change this. pidfile /var/run/slapd/slapd.pid # List of arguments that were passed to the server argsfile/var/run/slapd/slapd.args # Read slapd.conf(5) for possible values loglevel0 # Where the dynamically loaded modules are stored modulepath /usr/lib/ldap moduleload back_bdb moduleload syncprov # The maximum number of entries that is returned for a search operation sizelimit 500 # The tool-threads parameter sets the actual amount of cpu's that is used # for indexing. tool-threads 1 ### # Specific Backend Directives for bdb: # Backend specific directives apply to this backend until another # 'backend' directive occurs backend bdb checkpoint
2 Printers not installable on cups/samba
Hallo! I set up a new sarge - cups - samba server and installed almost all printers. After some trying I updatet samba to 3.0.21 from testing but it was no difference. I had some problems that I would like to understand or to solve: - I could prepare and install printer drivers for windows with APW from windows 2000 for theese printers withou problems: hp lj 4050, brother hl-1650 and hp lj 4m+ - I could not do the same from an xp-pro sp2 wks. could not add the driver (same user as with w2k wks) - I could only install manually with rpcclient as described in the samba-howto collection these printers: oki c5300, kyocera FS-1020, FS-6020 and FS-C5020 - I can NOT install a brother hl-1470 and konika 7222 (ps) brother: cannot copy all files to the samba and install then konika: all files are kopied from APW, but at the end permission denied or: manually with rpcclient: all files are at the right place, but it says that the driver is unknow. Had this before only if I forgot to copy a file, but its there with correct perms. - I can not get working this under windwos with point+print even if the driver installation was successfully: hp lj 4000tn the best way: cupsaddsmb - does not work for me with all these new program versions. Have a running one with woody, samba 3.0.10 and cups 1.1.20final-12.backports.org.1. thank you angela -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cups - samba - frustration!
Am Dienstag, 10. Januar 2006 12.10 schrieb Clive Menzies: On (10/01/06 08:53), Angela Gavazzi wrote: I think I'm doing some idiot error, but I can't find it - or it's a library problem or something else. Not sure this will be much help but here goes ... I have a sarge system, samba 3.0.20 from testing (also tried samba version from sarge) and tried cups in all versions: 1.0.23.10/12/15 (sarge,testing,unstable). Samba is member server in an NT4 domain (need to move the printserver to migrate the domain), authentication through winbind, all works on samba. Can make shares, put data into it, robocopy data from windows to it with the correct acls. I can install printers in cups, can print from Linux, all is ok. Samba 3.0.14a-3 and Cupsys 1.1.23-10 work fine on our sarge servers serving Windows (XP, 2000 and 98), Mac and Linux clients. I don't believe you will gain much from using the etch versions unless there is specific functionality you're after that isn't available in sarge. Sure but it's not better with the sarge version, I had this at first and tried the other later, as I couldn't get it running. I haven't yet cracked centralised authentication and so the setups we have are simpler in many respects. Nonetheless it is worth referring to http://www.faqs.org/docs/Linux-mini/Debian-and-Windows-Shared-Printing.html I will have a look at it. if you haven't already. When I try to prepare the printerdrivers for the windows clients with cupsaddsmb nothing happens: no error message, Printer added successfully but not drivers copied to print$ share, no updates from ntprinters.tdb, nothing. I just put a post here about 10 days ago, but nobody ansered, the same on samba and cups list. At the risk of asking a dumb question, have you set up the windows driver sharing within smb.conf? sure [print$] [printers] and necessary permissions. On the post from 2 1. 06 16.17 I attached all the configs if you like to see them Also can you print from windows printer setting it up with a driver sourced from somewhere other than the server? do you meen from windows client to the printer connected to cups with a locally installed driver? Or do you meen if I loaded the windows driver to the server via windows printer wizard? Regards Clive thanks! angela -- www.clivemenzies.co.uk ... ...strategies for business -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cups - samba - frustration! - LIKE SOLVED
Hi Clive, the last 2 hours I set up a new (about the 10th) pure! sarge (doing all testing in vmware), installed all the necessary stuff, joined to domain, installed a printer test under cups and tested it. then I went on a w2k client, connect to the printers share, uploaded the windows driver to the samba machine. (This was not possible with an xp-pro client, don't know why) tThen from another machine I could connect to the printer and print. so I think I will have to use this way instead of cupsaddsmb, which is a great tool and very confortable! I used it the last 2 years on my old samba: you don't need to install every printer locally on windows before and need only! a ppd, from linuxprinting or from vendor. As we will use pykota for accounting, because I cannot way longer for a running version of the cups driver, I don't need the cupsdriver for accounting anymore, also if it has the advantage that the users can define billing per print job. thank you very! much for your effort and help!!! angela Am Dienstag, 10. Januar 2006 18.23 schrieb Clive Menzies: Angela Gavazzi wrote: Am Dienstag, 10. Januar 2006 12.10 schrieb Clive Menzies: http://www.faqs.org/docs/Linux-mini/Debian-and-Windows-Shared-Printing.ht ml I will have a look at it. When I try to prepare the printerdrivers for the windows clients with cupsaddsmb nothing happens: no error message, Printer added successfully but not drivers copied to print$ share, no updates from ntprinters.tdb, nothing. At the risk of asking a dumb question, have you set up the windows driver sharing within smb.conf? sure [print$] [printers] and necessary permissions. On the post from 2 1. 06 16.17 I attached all the configs if you like to see them I haven't got a copy of your original post but there is printer share section and an additional share for the drivers. I don't use the downloadable drivers and have this commented out: [printers] comment = All Printers browseable = yes printable = yes public = yes create mode = 0700 guest ok = yes guest only = yes use client driver = yes path = /tmp # Windows clients look for this share name as a source of downloadable # printer drivers # [print$] # comment = Printer Drivers # path = /var/lib/samba/printers # browseable = yes # read only = yes # guest ok = no Also can you print from windows printer setting it up with a driver sourced from somewhere other than the server? do you meen from windows client to the printer connected to cups with a locally installed driver? Or do you meen if I loaded the windows driver to the server via windows printer wizard? I just reread what I wrote and it doesn't make much sense to me either :) What I meant to say was: Also can you print from a windows 'PC' setting it up with a driver sourced from somewhere other than the server? What I do is install cups on the server with the requisite driver for the printer using the cups web interface (using lynx, I don't have a gui installed). Test it will print a test page from the web interface. Set to use the client (in your case windows) driver within the smb.conf (see above). Then set up each individual printer from windows and make sure it will print via the server. Typically, I source an appropriate driver for the operating system and particular printer. On Windows it's a little confusing because you have to select local rather than network printer and then configure a new port for the windows/samba share. Alternatively, if you explore and then right click on the printer you can install from there. Apologies, if this is 'teaching your grandmother to suck eggs' I was asking whether you've tried this before attempting to automate any driver installation. Regards Clive -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
cups - samba - frustration!
Is anybody there who got cups and samba working together in the last time? I think I'm doing some idiot error, but I can't find it - or it's a library problem or something else. I have a sarge system, samba 3.0.20 from testing (also tried samba version from sarge) and tried cups in all versions: 1.0.23.10/12/15 (sarge,testing,unstable). Samba is member server in an NT4 domain (need to move the printserver to migrate the domain), authentication through winbind, all works on samba. Can make shares, put data into it, robocopy data from windows to it with the correct acls. I can install printers in cups, can print from Linux, all is ok. When I try to prepare the printerdrivers for the windows clients with cupsaddsmb nothing happens: no error message, Printer added successfully but not drivers copied to print$ share, no updates from ntprinters.tdb, nothing. I just put a post here about 10 days ago, but nobody ansered, the same on samba and cups list. I would really appreciate if somebody would try to help! sincerely Angela -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
samba, cups and cupsaddsmb
Hallo, I have an old samba-cups printserver (woody), connected to the domain through winbind, that I want replace now. I installed a new samba-cups server on a sarge machine. Windbind works, I can get all users and groups. I copied the generic windows postscript driver files as in cupsaddsmb-manpage described to /usr/share/cups/drivers (tried also adobe drivers) Installed a printer in cups (test), reloaded smb.conf - I can see the printer from windows. When I try to cupsaddsmb the printer driver for the windows clients, nothing happens. No driver is copied to /var/lib/samba/printers/W32X86/3, on the console I get the message, that the driver was addedd successfully. cupsaddsmb -v -U administrator test Password for administrator required to access localhost via SAMBA: Running command: rpcclient localhost -N -U'administrator%x' -c 'setdriver test test' Succesfully set test to driver test. I tried with version 3.0.14 from sarge and also 3.0.20b from testing. Set this permissions: drwxrwxrwx 4 root root 4096 Jan 2 12:05 /var/lib/samba/printers/* drwxrwsr-x 2 root lpadmin 4096 Jan 2 11:52 /usr/share/cups/drivers/ -rw-r--r-- 1 admin lpadmin 131584 J /usr/share/cups/drivers/PS5UI.DLL -rw-r--r-- 1 admin lpadmin 25113 /usr/share/cups/drivers/PSCRIPT.HLP -rw-r--r-- 1 admin lpadmin 792644 /usr/share/cups/drivers/PSCRIPT.NTF -rw-r--r-- 1 admin lpadmin 455168 /usr/share/cups/drivers/PSCRIPT5.DLL It would be great if someone could point me to the problem or error I don't see! tia angela I attach a log from cupsaddsmb with debug level 5 and here's my smb.confs part concerning cups: [global] workgroup = AAG netbios name = samba2 server string = Samba %v wins server = 192.168.100.30 domain logons = no domain master = no preferred master = no password server = 192.168.100.30 wins server = 192.168.100.30 allow trusted domains = yes os level = 20 security = domain encrypt passwords = true ## Printing ## load printers = yes printing = cups printcap name = cups [printers] comment = All Printers browseable = no path = /tmp printable = yes create mask = 0700 [print$] comment = Printer Drivers path = /var/lib/samba/printers browseable = yes read only = yes guest ok = yes write list = @AAG+Domänen-admins, root INFO: Current debug levels: all: True/5 tdb: False/0 printdrivers: True/5 lanman: False/0 smb: False/0 rpc_parse: False/0 rpc_srv: False/0 rpc_cli: False/0 passdb: True/5 sam: False/0 auth: False/0 winbind: True/2 vfs: False/0 idmap: False/0 quota: False/0 acls: False/0 locking: False/0 msdfs: False/0 doing parameter max log size = 5000 doing parameter syslog = 0 doing parameter panic action = /usr/share/samba/panic-action %d doing parameter security = domain doing parameter encrypt passwords = true doing parameter load printers = yes doing parameter printing = cups doing parameter printcap name = cups doing parameter socket options = TCP_NODELAY doing parameter client ntlmv2 auth = yes doing parameter restrict anonymous = no doing parameter client plaintext auth = no doing parameter max protocol = NT doing parameter ldap ssl = No doing parameter server signing = Auto doing parameter winbind separator = + doing parameter winbind uid = 1-2 doing parameter winbind gid = 1-2 doing parameter winbind enum users = yes doing parameter winbind enum groups = yes pm_process() returned Yes Attempting to register new charset UCS-2LE Registered charset UCS-2LE Attempting to register new charset UTF-16LE Registered charset UTF-16LE Attempting to register new charset UCS-2BE Registered charset UCS-2BE Attempting to register new charset UTF-16BE Registered charset UTF-16BE Attempting to register new charset UTF8 Registered charset UTF8 Attempting to register new charset UTF-8 Registered charset UTF-8 Attempting to register new charset ASCII Registered charset ASCII Attempting to register new charset 646 Registered charset 646 Attempting to register new charset ISO-8859-1 Registered charset ISO-8859-1 Attempting to register new charset UCS2-HEX Registered charset UCS2-HEX Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for LOCALE Substituting charset 'ANSI_X3.4-1968' for
Verrechnung mit Cups
Guten Tag allerseits, ich versuche schon seid einer Weile rauszufinden, wie ich Verrechnungsinformationen in Cups erhalten kann. Es gibt das PageLog welches laut Handbuch folgende Informationen zurückgibt: printer user job-id date-time page-number num-copies job-billing hostname Ich finde aber nicht raus wie ich job-billing etwas mitgebe oder wie das sonst funktioniert. Kann mir jemand einen Hinweis auf entsprechende Doku oder einen kurzen Überblick über das Handhaben der Verrechung mit Cups geben? Herzlichen Dank Angela -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
locales richtig einstellen - klappt nicht
Hallo, ich habe die vorangegangenen Beiträge gelesen und die Einstellungen entsprechend vorgenommen, aber es gelingt mir nach wie vor nicht Umlaute an der Console zu schreiben. Wenn ich die Domänengruppen via Winbind anzeigen lasse, werden die Umlaute korrekt angezeigt. Das System ist Woody mti einem 2.4.22 Kernel. Was ist noch falsch? locale: [EMAIL PROTECTED] LC_CTYPE=[EMAIL PROTECTED] LC_NUMERIC=[EMAIL PROTECTED] LC_TIME=[EMAIL PROTECTED] LC_COLLATE=[EMAIL PROTECTED] LC_MONETARY=[EMAIL PROTECTED] LC_MESSAGES=[EMAIL PROTECTED] LC_PAPER=[EMAIL PROTECTED] LC_NAME=[EMAIL PROTECTED] LC_ADDRESS=[EMAIL PROTECTED] LC_TELEPHONE=[EMAIL PROTECTED] LC_MEASUREMENT=[EMAIL PROTECTED] LC_IDENTIFICATION=[EMAIL PROTECTED] LC_ALL= danke und gruss angela -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Netzwerkkarten spinnen
Hallo! Falls diese Posting zwei Mal erscheinen sollte, bitte ich um entschuldigung. Ich verdächtige meinen newsreader die Sachen nicht zu verschicken. Deswegen nochmal per Email direkt. Ich habe Woody auf einem Proliant ML350G installiert. Der hat eine Broadcom 5700 Karte. Damit ich Netz kriege hab ich eine 3Com Karte reingebaut. Dann neuen 2.4.22 Kernel kompiliert mit unterstützung für die Tigon 3 Karte. Habe ich schonmal so gemacht und die Karte lief dann ohne Probleme. Dann in /etc/network/interfaces die neue Karte eingetragen und ein append in lilo.conf für den Kernel gesetzt. Da die Karte trotzdem nicht wollte, habe ich sie noch mit linuxconf konfiguriert. (vor lauter Verzweiflung - kenne Debian noch nicht so gut) Dann nochmal mit dpkg-reconfigure etherconf (befehl richtig? auf jedem Fall so was ähnliches) Ich dachte erst die Karte ginge immer noch nicht, obwohl ifconfig beide Karten als up mit entsprechender ip anzeigt. Beim Verbinden mit ssh habe ich dann versehentlich die IP der Karte genommen, die gerade nicht am Neztkabel hing und stellte mit erstauen fest, dass die eine Karte auf beide IP adressen reagiert. Und jetzt kommt das beste: ich habe es nicht 10x getestet, aber ich habe den Eindruck, dass nach jedem Reboot die jeweils andere Karte geht. Es ist jetzt zumindest schon das 4 Mal, dass ich durch umstöpseln auf die andere Karte gegenüber dem Vormal die Maschine erreichen kann. Wäre sehr dankbar Vielen Dank im voraus angela ifconfig: eth0 Link encap:Ethernet HWaddr 00:04:75:AE:BF:00 inet addr:192.168.100.68 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1759 errors:0 dropped:0 overruns:1 frame:0 TX packets:46 errors:0 dropped:0 overruns:0 carrier:6 collisions:0 txqueuelen:100 RX bytes:204544 (199.7 KiB) TX bytes:6379 (6.2 KiB) Interrupt:11 Base address:0x4000 eth1 Link encap:Ethernet HWaddr 00:08:02:EF:CC:75 inet addr:192.168.100.69 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:70 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:7146 (6.9 KiB) TX bytes:0 (0.0 b) Interrupt:5 loLink encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:979 (979.0 b) TX bytes:979 (979.0 b) /etc/network/interfaces: ### etherconf DEBCONF AREA. DO NOT EDIT THIS AREA OR INSERT TEXT BEFORE IT. auto lo eth0 eth1 iface lo inet loopback iface eth0 inet static address 192.168.100.68 netmask 255.255.255.0 iface eth1 inet static address 192.168.100.69 netmask 255.255.255.0 ### END OF DEBCONF AREA. PLACE YOUR EDITS BELOW; THEY WILL BE PRESERVED. __ Horoskop, Comics, VIPs, Wetter, Sport und Lotto im WEB.DE Screensaver1.2 Kostenlos downloaden: http://screensaver.web.de/?mc=021110 -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
