xorg.conf for xinerama
Etch KDE 3.5.5 Intel 945GM/GMS/940GML i810 Dell Latitude D520 Hello, I am desperately trying to get the simultaneous video-output running for beamer (external) and local display (internal). I found some xorg.conf's on the net for dual-head or xinerama, but I could not get one working with my computer. In addition the Xorg.0.log also reports Bad V_BIOS checksum. Maybe there is somebody out there . Bernd -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: dpkg-reconfigure xserver-xorg question
Am Freitag, 5. Oktober 2007 03:16 schrieb Jude DaShiell: > What does it mean when you've got all of the questions answered by > dpkg-reconfigure xserver-xorg and dpkg-reconfigure xserver-xorg refuses to > create configuration files because pre-existing files were found? Hi, have you tried this: # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Or try to rename xorg.conf and move all previous ones somewhere else and then start reconfigure. Greetings Bernd -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
javaws ans iceweasel config-problem
Etch installed: Iceweasel sun-java5-bin sun-java5-plugin sun-java5-jre Hello, when trying to start a web-based application, the download of the *.jnlp file starts, then iceweasel asks how to handle the file (sun web-java 5) and then the "Java-loading"-info pops up. After a few moments the info disappears and that's it. Opening a terminal and starting javaws nameoffile.jnlp on command-line the web-application starts as intended. Normal java-applets are working fine within iceweasel.. Any ideas? Are there log-files somewhere? I did not find any. Thank you Bernd
Re: Help driver for lexmark E120
Am Dienstag 17 April 2007 19:05 schrieb Joe Navara: > Good day, I use OS Debian 4.0 and I have problem to find driver for laser > printer Lexmark E 120. > > Thank you wery much for your help. > > Frank Bednar > > Slovakia Which printingsystem are you using? CUPS? I run an E320 with this ppd: Lexmark Optra E321 Foomatic/ljet4 but my E320 with HP LaserJet 4 or 5 drivers is also runnning well. Greetings Bernd Kloss -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: xine: no plugin for MRL
Am Samstag 31 März 2007 18:45 schrieb Nigel Henry: > On Saturday 31 March 2007 17:11, B_Kloss wrote: > > Am Samstag, 31. März 2007 16:20 schrieb Douglas Allan Tutty: > > > On Sat, Mar 31, 2007 at 08:54:04AM +0200, Bernd Kloss wrote: > > > > Hello, > > > > > > > > on three different computers, all Etch 2.6.18-3-k7, KDE 3.5, > > > > Kaffeine 0.83 > > > > > > > > DVDs recorded from TV with a normal DVD-recorder can be played > > > > correctly. > > > > > > > > But some commercial DVDs can only be played on one of them. > > > > > > > > Following error (translated message) occurs on the other two > > > > computers: > > > > > > > > Source cannot be read. > > > > No sufficient rights or no data on source > > > > xine: cannot find plugin for MRL [dvd:///dev/hdc] > > > > xine: plugin cannot open MRL [dvd:///dev/hdc] > > > > > > Do you have in your /etc/apt/sources.list a line like: > > > > > > deb http://debian-multimedia.org etch main > > > > > > You see, the commercial DVDs use non-free encodings that can't be used > > > in debian proper. So debian-multimedia has packages. If you look at > > > the depencencies and recommends of the DVD playing packages (and their > > > libs), if you aren't using debian-multimedia you may see some that say > > > "unavailable". (I use aptitude interactive; I don't know how to look > > > at this from the command line). > > > > > > Doug. > > > > I am afraid, this may not be the reason, because all three computers are > > using the same sources.list: > > > > > > deb http://debian-multimedia.informatik.uni-erlangen.de/ etch main > > is where I am getting no free stuff. > > > > Anyway, thank you! > > > > Bernd > > Another thought also, is do you have libdvdcss installed on all 3 machines? > > If not it might explain why you can play your homemade dvd's, but can only > play some commercial dvd's on the one machine that you may have libdvdcss > installed on. > > Libdvdcss is needed for playing encrypted dvd's, and synaptic shows it as > the package libdvdcss2 > > Nigel. Sorry to come up again with that problem. I thought that Nigel gave the solution, because installing libdvdcss2 made my computer play all kinds of dvd's. Last week I installed libdvdcss2 on the third computer with that error, but here it did not work. With commercial dvd's still the error: cannot find plugin for MRL occurs. w32codecs are installed. Something else still is missing. How can I find out, what I have to install? Thanks for help Bernd
Re: Password scanner do linux
Am Sonntag 08 April 2007 00:03 schrieb Jarek: > Hi all! > > I want to scan my servers for weak passwords. What tool has the best > password databases for such scanning? I want to scan > directly /etc/shadow - is this a good idea ? > I want also to scan webmail with passwords from Active Directory - is > there some automated tool to do it ? > > Happy Easter! > -- > Jarek <[EMAIL PROTECTED]> Maybe JOHN might be a good choice: http://www.openwall.com/john/ Greetings Bernd -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: xine: no plugin for MRL [SOLVED]
Am Samstag, 31. März 2007 18:45 schrieb Nigel Henry: > On Saturday 31 March 2007 17:11, B_Kloss wrote: > > Am Samstag, 31. März 2007 16:20 schrieb Douglas Allan Tutty: > > > On Sat, Mar 31, 2007 at 08:54:04AM +0200, Bernd Kloss wrote: > > > > Hello, > > > > > > > > on three different computers, all Etch 2.6.18-3-k7, KDE 3.5, > > > > Kaffeine 0.83 > > > > > > > > DVDs recorded from TV with a normal DVD-recorder can be played > > > > correctly. > > > > > > > > But some commercial DVDs can only be played on one of them. > > > > > > > > Following error (translated message) occurs on the other two > > > > computers: > > > > > > > > Source cannot be read. > > > > No sufficient rights or no data on source > > > > xine: cannot find plugin for MRL [dvd:///dev/hdc] > > > > xine: plugin cannot open MRL [dvd:///dev/hdc] > > > > > > Do you have in your /etc/apt/sources.list a line like: > > > > > > deb http://debian-multimedia.org etch main > > > > > > You see, the commercial DVDs use non-free encodings that can't be used > > > in debian proper. So debian-multimedia has packages. If you look at > > > the depencencies and recommends of the DVD playing packages (and their > > > libs), if you aren't using debian-multimedia you may see some that say > > > "unavailable". (I use aptitude interactive; I don't know how to look > > > at this from the command line). > > > > > > Doug. > > > > I am afraid, this may not be the reason, because all three computers are > > using the same sources.list: > > > > > > deb http://debian-multimedia.informatik.uni-erlangen.de/ etch main > > is where I am getting no free stuff. > > > > Anyway, thank you! > > > > Bernd > > Another thought also, is do you have libdvdcss installed on all 3 machines? > > If not it might explain why you can play your homemade dvd's, but can only > play some commercial dvd's on the one machine that you may have libdvdcss > installed on. > > Libdvdcss is needed for playing encrypted dvd's, and synaptic shows it as > the package libdvdcss2 > > Nigel. Great, thank you! I installed the libdvdcss2-dev with aptitude and it works just fine. Bernd
Re: xine: no plugin for MRL
Am Samstag, 31. März 2007 16:20 schrieb Douglas Allan Tutty: > On Sat, Mar 31, 2007 at 08:54:04AM +0200, Bernd Kloss wrote: > > Hello, > > > > on three different computers, all Etch 2.6.18-3-k7, KDE 3.5, Kaffeine > > 0.83 > > > > DVDs recorded from TV with a normal DVD-recorder can be played correctly. > > > > But some commercial DVDs can only be played on one of them. > > > > Following error (translated message) occurs on the other two computers: > > > > Source cannot be read. > > No sufficient rights or no data on source > > xine: cannot find plugin for MRL [dvd:///dev/hdc] > > xine: plugin cannot open MRL [dvd:///dev/hdc] > > Do you have in your /etc/apt/sources.list a line like: > > deb http://debian-multimedia.org etch main > > You see, the commercial DVDs use non-free encodings that can't be used > in debian proper. So debian-multimedia has packages. If you look at > the depencencies and recommends of the DVD playing packages (and their > libs), if you aren't using debian-multimedia you may see some that say > "unavailable". (I use aptitude interactive; I don't know how to look at > this from the command line). > > Doug. I am afraid, this may not be the reason, because all three computers are using the same sources.list: deb http://debian-multimedia.informatik.uni-erlangen.de/ etch main is where I am getting no free stuff. Anyway, thank you! Bernd
Re: key error
Am Sonntag, 26. November 2006 03:34 schrieb L.V.Gandhi: > I get following error on apt-get update. > > W: There are no public key available for the following key IDs: > A70DAF536070D3A1 > W: You may want to run apt-get update to correct these problems > > What to do? I have the same problem. Haven't seen it before. Why install keyring? Bernd -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: how can i see booting messages ??
Am Donnerstag, 26. Oktober 2006 13:29 schrieb debian: > Hello, > > I still have problems with my new installation. > There is some important information (i think) displayed just after grub > starts booting about the hdd, but i can't see what it is because it goes > to fast and it is too far up to go with CTRL-PageUP. > So, is there i way that i can pause or stop the messages so that i seen > what it is ? > > Thnx, > Verus. > > Hi, in /var/log you can find various files with information about your system like dmesg messages and others Installing hwinfo with aptitude and hwinfo > myhw.info creates a file with useful systeminformation. Best regards Bernd -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: eth0 without IP on boot
Am Mittwoch, 25. Oktober 2006 09:55 schrieb Tim Post: > Hotplug setup right? May help to post your /etc/network/interfaces file. > > Best, > -Tim > > On Wed, 2006-10-25 at 09:17 +0200, Bernd Kloss wrote: > > Etch > > 2.6.17-2-k7 > > different realtek, 3COM, onboards > > > > Hello, > > > > I am having problems with clients on boot. > > Client is booting, but not finding yp-server > > This occurs on different clients, sometimes I have to reboot a client a > > few times and then it works. This behaviour is not reproducable. No > > rules. > > > > ifconfig shows description for lo, nothing for eth0. > > On > > ifconfig eth0 192.168.136.XYZ > > /etc/init.d/nis start > > everything is working normally. > > > > Has anyone a clue? > > > > Thanks and greetings > > Bernd Kloss On running hwinfo, I found following information: net interface: name = lo, path = /class/net/lo type = 772 hw_addr = 00:00:00:00:00:00 net interface: name = eth0, path = /class/net/eth0 type = 1 hw_addr = 00:14:85:51:65:5b net device: path = /devices/pci:00/:00:12.0 net driver: name = via-rhine, path = /bus/pci/drivers/via-rhine net interface: name = sit0, path = /class/net/sit0 type = 776 hw_addr = 00:00:00:00 lo: ethtool link state: 1 eth0: ethtool link state: 1 ** sit0: GLINK ethtool error: Invalid argument ** >> pppoe.1: looking for pppoe >> pppoe.2: discovery Attempt number 1 eth0: Sending PADI packet Timeout waiting for PADO packets Attempt number 2 What is sit0 and what is GLINK tool. Is there any hint for not initialising eth0 correctly? Greetings Bernd Kloss
Re: eto without IP on boot
Hi, here it is: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.136.219 netmask 255.255.255.0 network 192.168.136.0 broadcast 192.168.136.255 gateway 192.168.136.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.136.1 dns-search gym-anna.intra How can I find out if hotplug is configured correctly? Greetings Bernd Am Mittwoch, 25. Oktober 2006 09:55 schrieb Tim Post: > Hotplug setup right? May help to post your /etc/network/interfaces file. > > Best, > -Tim > > On Wed, 2006-10-25 at 09:17 +0200, Bernd Kloss wrote: > > Etch > > 2.6.17-2-k7 > > different realtek, 3COM, onboards > > > > Hello, > > > > I am having problems with clients on boot. > > Client is booting, but not finding yp-server > > This occurs on different clients, sometimes I have to reboot a client a > > few times and then it works. This behaviour is not reproducable. No > > rules. > > > > ifconfig shows description for lo, nothing for eth0. > > On > > ifconfig eth0 192.168.136.XYZ > > /etc/init.d/nis start > > everything is working normally. > > > > Has anyone a clue? > > > > Thanks and greetings > > Bernd Kloss > > _ > > Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! > > http://smartsurfer.web.de/?mc=100071&distributionid=0066 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: automounting usb-storage 2
Am Mittwoch, 4. Oktober 2006 21:55 schrieb Andrei Popescu: > Bernd Kloss <[EMAIL PROTECTED]> wrote: > > What can I do to let every user read its USB-stick? > > Thank You! > > I'm guessing you need to add the users to the plugdev group. From a > root console you need to do: > > #adduser myusername plugdev > > HTH > Andrei > -- > If you can't explain it simply, you don't understand it well enough. > (Albert Einstein) Sorry, I forgot to tell. They are members of plugdev on the server, all clients should know, because they can login with username from client. Bernd -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: NTP Daemon
Am Freitag, 29. September 2006 12:33 schrieb CJ van den Berg: > On Fri, Sep 29, 2006 at 12:21:20PM +0200, Michele Della Marina wrote: > > I'm looking for a simple NTP client daemon to synchronize the time on > > my debian server. I'm testing openntpd but I've this error message: > > adjtime failed: Invalid argument > > > > Could someone help me or suggest something? > > Thanks > > "aptitude install ntp-server" and off you go. > > I know it's called a "server" and you want a "client" but there's not > really much difference with NTP and the default configuration should be > exactly what you want. Maybe you might install ntpdate in addition. I think this makes the adjustment of the clock quicker once the ntp-'server' has got the time. Bernd -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Etch, Xorg, reconfigure
Am Montag, 11. September 2006 02:53 schrieb Owen Heisler: > On Sun, 2006-09-10 at 17:54 +0200, B_Kloss wrote: > > Changing the settings: > > I tried > > sudo dpkg-reconfigure -phigh xserver-xorg > > as well as > > sudo dpkg-reconfigure -plow xserver-xorg > > > > The answer always is: > > xserver-xorg postinst warning: not updateing /etc/X11/X : file has been > > customized > > Running "dexconf -o /etc/X11/xorg.conf" should let you configure > xserver-xorg. Thank you, this works. At least I get the standard VESA , very slow. Is there a way of installing S3 unicrome pro instead? Greetings Bernd -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Etch, Xorg, reconfigure
Am Montag, 11. September 2006 06:05 schrieb Kevin Mark: > On Sun, Sep 10, 2006 at 05:54:36PM +0200, B_Kloss wrote: > > > > Hi, Kev, > > > > thank you, but I did not succeed. > > Cloning: > > find -depth ! -path "./data/*" | cpio -a -o -H crc -V | gzip -f | split > > -b 4000m --verbose - ./sicher/hda1-09-09-06B.cpio.gz > > hmm. that is something I have never seen ;-) > > > Changing the settings: > > I tried > > sudo dpkg-reconfigure -phigh xserver-xorg > > as well as > > sudo dpkg-reconfigure -plow xserver-xorg > > > > The answer always is: > > xserver-xorg postinst warning: not updateing /etc/X11/X : file has been > > customized > > > > I tried VESA and VGA. There is another client under SuSE 9.3 and the > > xorg.conf says: VESA, Framebuffer. Putting these settings into the > > Debian-Client did not help, because a fbdev is missing > > > > What to do about that??? > > > > Thank you. > > Hi, > this may do it. > mv /etc/X11/xorg.conf /etc/X11/xorg.conf.bak > dpkg-reconfigure -plow xserver-xorg > > cheers, > Kev Hi, Kev, this way of cloning works quite fine, since you can keep parts, that do not need changing. The response on dpkg was: dpkg-reconfigure -plow xserver-xorg xserver-xorg postinst warning: not updating /etc/X11/X; file has been customized I can't get rid of it, even if I delete the xorg.conf! Greetings Bernd -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Etch, Xorg, reconfigure
Am Sonntag, 10. September 2006 12:46 schrieb Kevin Mark: > On Sun, Sep 10, 2006 at 12:33:23PM +0200, Bernd Kloss wrote: > > Hi, > > trying to make a clone, I have problems reconfiguring Xserver using > > dpkg-reconfigure xserver-xorg > > > > lspci on target reports: > > 01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome > > Pro VGA Adapter (rev 01) > > > > lspci on source reports: > > 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY > > [Radeon 7000/VE] > > > > /var/log/Xorg.0.log on target reads: > > > > (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 9 20:30:33 2006 > > (==) Using config file: "/etc/X11/xorg.conf" > > (==) ServerLayout "Default Layout" > > (**) |-->Screen "Default Screen" (0) > > (**) | |-->Monitor "Standardbildschirm" > > (**) | |-->Device "ATI Technologies, Inc. Radeon RV100 QY [Radeon > > 7000/VE]" (**) |-->Input Device "Generic Keyboard" > > (**) |-->Input Device "Configured Mouse" > > (WW) The directory "/usr/X11R6/lib/X11/fonts/misc" does not exist. > > Entry deleted from font path. > > II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), > > > > ...many.. > >... ATI Radeon X850 XT PE (R480) (PCIE), > > ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) > > (AGP), ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) > > (AGP) (II) Primary Device is: PCI 01:00:0 > > (II) ATI: Candidate "Device" section "ATI Technologies, Inc. Radeon > > RV100 QY [Radeon 7000/VE]". > > (II) ATI: Shared non-ATI VGA in PCI/AGP slot 1:0:0 detected. > > (EE) No devices detected. > > Fatal server error: > > no screens found > > > > To me this means, that there is still the source-graphics installed. > > > > I tryed to dpkg-reconfigure xserver-xorg, but could not find the right > > settings. What to do? > > Thanks for helping. > > Hi Bernd, > first, you did not say HOW you cloned the system. But it would seem that > you did not setup the target system with the correct video setting. > the source server has a ati radeon 7000/ve and > the target server has a S3 Unicrome Pro > If you ran 'dpkg-reconfigure xserver-xorg', you would try to find a > diffrent setting. i'm not sure what the best setting is, but you can > always start with the basic 'vesa' driver. Google for a more featurefull > driver. The source card can use: vesa,ati or radeon. The message seems > to say that you setup the target with one of these settings. Also, > sometimes you may need a 'lower level' reconfigure, this is done with > 'dpkg-reconfigure -plow xserver-xorg'. > Cheer, > Kev Hi, Kev, thank you, but I did not succeed. Cloning: find -depth ! -path "./data/*" | cpio -a -o -H crc -V | gzip -f | split -b 4000m --verbose - ./sicher/hda1-09-09-06B.cpio.gz Changing the settings: I tried sudo dpkg-reconfigure -phigh xserver-xorg as well as sudo dpkg-reconfigure -plow xserver-xorg The answer always is: xserver-xorg postinst warning: not updateing /etc/X11/X : file has been customized I tried VESA and VGA. There is another client under SuSE 9.3 and the xorg.conf says: VESA, Framebuffer. Putting these settings into the Debian-Client did not help, because a fbdev is missing What to do about that??? Thank you. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Etch, Update => Booterror
ETCH 2.6.16-2-686 / on hdb2 with ext3 After 'aptitude update' and 'apt-get upgrade' on my server occurs a boot error: During upgrade a new kernel 2.6.18 was announced and a reboot after update was recommended While booting I get the grub-menu and on chosing the regular option, the screen reads: root (hd1,1) - this is correct and according to device.map: hdb=hd1 But then: filesystem type unknown partition type 0x82 kernel /boot/vmlin.. root= dev/hdb2 ro Error 17 Cannot mount selected partition Booting from hdd with SuSE and using fdisk, hdb2 is type 83 and not 0x82 hdb2 is mountable fsck.ext3 /dev/hdb2 => okay What to do about that? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]