Re: setserial, stty not working
On 13.01.2000 08:38:00 AM matthschulz wrote: >The permissions are: crw-rw 1 root dialout4, 64 Dec 28 21:00 >/dev/ttyS0; I'm in the group dialout, but only minicom changes actualy the >settings - nothing else I found - stty and setserial. > So you tried with setserial, too ? B.
Re: /dev/ttyS2 port not accessible
>do you have a soundcard? many soundcards (esp soundblaster) use irq5, are >you sure there are no conflicts with anything on that serial port? >nate Yes I do, but sound support is not enabled and it worked under RH 5.2. The main problem is that it works under older kernel- now I'm trying to use kernel with different options disabled and we'll see what is the exact problem (First I though SCSI card, but it's not). B.
/dev/ttyS2 port not accessible
When using new (compiled) kernel (e.g. 2.2.15) I receive message for port /dev/ttyS2 - port busy (0 and 1 working properlly). Any ideas what might be the problem ? B.
Re: /dev/ttyS2 port not accessible
Acctualy if using default kernel for Debian 2.1 (I think 2.0.36) everything works fine. I didn't even start using the port since I need to change it's IRQ to 5 I used setserial and received the message about busy port. Let me add that I don't have any additional serial cards. This port is used for internal modem. B. [EMAIL PROTECTED] on 22.12.99 04:31:00 PM To: Bostjan JERKO/si/[EMAIL PROTECTED] cc: debian-user@lists.debian.org@internet Subject:Re: /dev/ttyS2 port not accessible On 22 Dec 1999, Bostjan JERKO wrote: Bostja >When using new (compiled) kernel (e.g. 2.2.15) I receive message for port /dev/ttyS2 - port busy (0 and 1 working properlly). Any Bostja >ideas what might be the problem ? is that serial port hard coded on whatever device it's on? does the system report the right type, I/O address and IRQ for it? if not, use the setserial program to manually set it.. nate [mailto:[EMAIL PROTECTED] ]-- Vice President Network Operations http://www.firetrail.com/ Firetrail Internet Services Limited http://www.aphroland.org/ Everett, WA 425-348-7336http://www.linuxpowered.net/ Powered By:http://comedy.aphroland.org/ Debian 2.1 Linux 2.0.36 SMPhttp://yahoo.aphroland.org/ -[mailto:[EMAIL PROTECTED] ]-- 7:26am up 124 days, 19:16, 2 users, load average: 0.32, 0.28, 0.31
Re: /dev/ttyS2 port not accessible
Acctualy if using default kernel for Debian 2.1 (I think 2.0.36) everything works fine. I didn't even start using the port since I need to change it's IRQ to 5 I used setserial and received the message about busy port. Let me add that I don't have any additional serial cards. This port is used for internal modem. B. [EMAIL PROTECTED] on 22.12.99 04:31:00 PM To: Bostjan JERKO/si/[EMAIL PROTECTED] cc: debian-user@lists.debian.org@internet Subject:Re: /dev/ttyS2 port not accessible On 22 Dec 1999, Bostjan JERKO wrote: Bostja >When using new (compiled) kernel (e.g. 2.2.15) I receive message for port /dev/ttyS2 - port busy (0 and 1 working properlly). Any Bostja >ideas what might be the problem ? is that serial port hard coded on whatever device it's on? does the system report the right type, I/O address and IRQ for it? if not, use the setserial program to manually set it.. nate [mailto:[EMAIL PROTECTED] ]-- Vice President Network Operations http://www.firetrail.com/ Firetrail Internet Services Limited http://www.aphroland.org/ Everett, WA 425-348-7336http://www.linuxpowered.net/ Powered By:http://comedy.aphroland.org/ Debian 2.1 Linux 2.0.36 SMPhttp://yahoo.aphroland.org/ -[mailto:[EMAIL PROTECTED] ]-- 7:26am up 124 days, 19:16, 2 users, load average: 0.32, 0.28, 0.31
/dev/ttyS2 port not accessible
When using new (compiled) kernel (e.g. 2.2.15) I receive message for port /dev/ttyS2 - port busy (0 and 1 working properlly). Any ideas what might be the problem ? B.
SCSI & ttyS2
When running with new kernel 2.2.15 compiled with SCSI support for Initio's 9100 I see (using setserial /dev/ttyS2) that serial port ttyS2 is busy (actually device or port is busy). What is the reason for that ? How to resolve the problem since I'm using this port for modem ? Will usage of modules help (SCSI support as module). B.
Re: Scilab
On 19.11.98 12:59:00 ojs wrote: >Hello. > >I have a slight problem running my Scilab. I installed it successfully >the other day but every time I try to run it nothing happens. The machine >just seems to run a script that does nothing and returns back to the >command prompt. I was wondering if this had something to do with libc5 >(which I have installed in my hamm) or if I need some verification from >the scilab ppl :) or is it something completely different? Can you tell me the versions of Debian and windows manager. I have Debian 2.0 with kde windows manager and it works just fine. Bostjan
Re: Ptolemy in debian?
On 12.11.98 11:42:00 PM wzab wrote: >I have downloaded it a few days ago, so I suppose it was the second >version. >After running pigi I get something like this: >PI initialization error (I don't remember the exact message, because I've >purged the deb package and started to experiment with rebuilding from >original sources) Can you tell me if you get any error message with dpkg of Ptolemy packages ? Bostjan
Re: Ptolemy in debian?
On 11.11.98 10:12:00 PM wzab wrote: > Hi! >Has anybody managed to compile the Ptolemy in debian? >I know, that there is a deb package available at Vigo university >(Spain), but it didn't work for me, and there was no source version of >package to check what is wrong... >The original sources obtained from Berkeley fail to compile complaining >about the "std.h" include file... >If anybody solved this problems successfully, please let me know... > Did you try with the second version. The first version has a bug, but they claim (haven't tried yet - big DL) that the second version is OK. Bostjan
Linux diskettes
Hello ! Can anybody tell me how to create basic diskettes for Linux (e.g. Debian) to install on PC without CD-ROM and than install the rest over the network. I tried make-floppy or something like that (can't remember exact name) but it exits with an error. Bostjan
Re: kppp
[EMAIL PROTECTED] on 27.10.98 04:45:00 PM To: Bostjan JERKO/si/[EMAIL PROTECTED] cc: debian-user@lists.debian.org@internet Subject:Re: kppp >Sounds like your chat script is garbled. Both 'OK' and 'CONNECT' are >messages that chat expects from the modem. >Send me a copy of your chatscript and the output of plog. I am not using ppp directy. Instead I use kppp and actualy I don't know where chat scipt for that is saved. Bostjan
kppp
I installed kde on my Debian 2.0 and would like to use kppp to connect to Internet. After installation and configuration I tried to connect to my ptovider, but script expects OK after CONNECT message, but my provider doesn't send any OK ater connection (in ppp it would be CONNECT "" ""). Can anybody tell me what to do ?
Linux on 4Mb
Is it possible to install Linux on machine with 4 Mb and of course it should work. Bostjan
Re: WP 7.0 on Db 2.0
>Sounds like you are still missing some needed libs. >what is your output of ``ldd xwp'' >mine shows -- > /lib/nfslock.so.0 => /lib/nfslock.so.0 (0x4000c000) > libXt.so.6 => /usr/lib/libc5-compat/libXt.so.6 (0x4000e000) > libX11.so.6 => /usr/lib/libc5-compat/libX11.so.6 (0x4005) > libXpm.so.4 => /usr/lib/libc5-compat/libXpm.so.4 (0x400ee000) > libm.so.5 => /lib/libm.so.5 (0x400fc000) > libc.so.5 => /lib/libc.so.5 (0x40105000) > libSM.so.6 => /usr/lib/libc5-compat/libSM.so.6 (0x401c3000) > libICE.so.6 => /usr/lib/libc5-compat/libICE.so.6 (0x401cc000) >> Thank all who responded to my mail about missing libraries for WP 7.0. I >> have different problem now. >> At the end of installation of WP 7.0 I get message >> "Segmentation fault Idir/$SHBIN/$DSTEXC -f " (I don't remember the >> rest). >> After installation I tried to start the program anyway, but I received >> message Segmentation fault. I have all the libraries mentioned above, but still nothing. Bostjan
xdm starting at the begining
How can I start xdm at the logon? I am using Debian 2.0 and the PC is stand alone. Another thing is how to set up different keyboard and font before xdm starts ? Bostjan
Unidentified subject!
>> Hello ! >> >> Thank all who responded to my mail about missing libraries for WP 7.0. I >> have different problem now. >> At the end of installation of WP 7.0 I get message >> "Segmentation fault Idir/$SHBIN/$DSTEXC -f " (I don't remember the >> rest). >> After installation I tried to start the program anyway, but I received >> message Segmentation fault. >> Any ideas what is wrong ? >Is it possible that you need the libc5 libraries? I have libc5 libraries installed. Bostjan
WP 7.0 on Db 2.0
Hello ! Thank all who responded to my mail about missing libraries for WP 7.0. I have different problem now. At the end of installation of WP 7.0 I get message "Segmentation fault Idir/$SHBIN/$DSTEXC -f " (I don't remember the rest). After installation I tried to start the program anyway, but I received message Segmentation fault. Any ideas what is wrong ? Bostjan
running X windows
> Are you sure an X server isn't already running ? What does 'ps aux' say ? I tried 'ps aux', here is result: USER PID %CPU %MEM SIZE RSS TTY STAT START TIME COMMAND daemon 121 0.0 0.5 796 348 ? S16:45 0:00 /sbin/portmap daemon 170 0.0 0.7 852 452 ? S16:45 0:00 /usr/sbin/atd jerko 197 0.6 1.8 1852 1168 1 S16:48 0:00 -sh jerko 202 0.0 0.8 920 532 1 R16:48 0:00 ps aux lp 139 0.0 1.4 1576 888 ? S16:45 0:00 lpd MAIN postgres 151 0.0 1.4 3536 928 ? S16:45 0:00 /usr/lib/postgresql/b root 1 1.2 0.6 772 396 ? S16:45 0:02 init root 2 0.0 0.0 0 0 ? SW 16:45 0:00 (kflushd) root 3 0.0 0.0 0 0 ? SW< 16:45 0:00 (kswapd) root12 0.0 0.3 736 236 ? S16:45 0:00 update root 108 0.0 0.8 900 524 ? S16:45 0:00 /sbin/syslogd root 110 0.2 0.9 1012 608 ? S16:45 0:00 /sbin/klogd root 117 0.0 0.5 756 364 ? S16:45 0:00 /sbin/kerneld root 123 0.0 0.7 872 456 ? S16:45 0:00 /usr/sbin/inetd root 129 0.0 0.6 780 440 ? S16:45 0:00 anacron -s root 134 0.0 0.5 764 360 ? S16:45 0:00 /usr/sbin/gpm -m /dev root 141 0.0 1.4 1692 948 ? S16:45 0:00 /usr/bin/omniNames root 149 0.0 1.4 1692 948 ? S16:45 0:00 /usr/bin/omniNames root 150 0.0 1.4 1692 948 ? S16:45 0:00 /usr/bin/omniNames root 162 0.0 1.4 1008 944 ? S16:45 0:00 /usr/sbin/xntpd root 167 0.0 0.7 912 448 ? S16:45 0:00 /usr/sbin/junkbuster root 173 0.0 0.7 864 504 ? S16:45 0:00 /usr/sbin/cron root 183 0.0 0.6 848 432 2 S16:45 0:00 /sbin/getty 38400 tty root 184 0.0 0.6 848 432 3 S16:45 0:00 /sbin/getty 38400 tty root 185 0.0 0.6 848 432 4 S16:45 0:00 /sbin/getty 38400 tty root 186 0.0 0.6 848 432 5 S16:45 0:00 /sbin/getty 38400 tty root 187 0.0 0.6 848 432 6 S16:45 0:00 /sbin/getty 38400 tty As it seems X windows is not running, any ideas ? Bostjan
Wordperfect 7.0 on Debian 2.0
> libXpm.so.4 => /usr/lib/libc5-compat/libXpm.so.4 (0x400eb000) I seem to be missing this library. Can anybody tell me in which package it is included. Bostjan
Wordperfect 7.0 on Debian 2.0
Hello ! When I start Wordperfect installation I get a message, that it can't start graphical installation so it starts with text installation. I would like to start graphical installation, but I guess that I am missing some libraries. Can anybody tell me which libraries are needed for Wordperfect 7.0 on Debian 2.0. Bostjan
running X windows
I still have problem running X windows (Xfree86) on Debian 2.0 as ordinary user. It works fine if I log on as root. I use it on stand alone machine without network card and xdm is not running. The messages I get are : _XSERVTransSocketUNIXCreateListener: ... Socket CreateListener() Failed _XSERVTransMakeAllCOTSServerListeners: Server already running Fatal server error: Canno't establish any listening sockets - Make sure an X server isn't already running. Bostjan
Ctrl-E
Hello ! When I want to print *.eps files my printer (HP 4L) doesn't eject at the end of page. Is this normal or should I add something to printcap ? I use magicfilter and print with lpr command (on local printer). Bostjan
X windows
I have a problem starting X windows as ordinary user. It works as root, but it looks like I don't have sufficient permissions as ordinary user. Any suggestions ? Bostjan
3 questions
I have 3 questions: 1) I installed Scilab (mathematical package) and I'm having problems with Backspace and Delete key. In Xwindows they work, but in Scilab I only get ~3. How to change setup. I know I can add Xdefaults, but don't know what to insert. 2) Is it possible to start Xwindows as regular user (not root) and without using suid ? 3) How to start xdm at start-up and how to install user keyboard before xdm starts ? I use Debian 2.0. Bostjan
Wordperfect + Debian 2.0
Hello ! Has anybody tried to install Wordperfect on Debian 2.0. I know it is possible to install it on 1.3 with libc5, but what about 2.0 (with libc6). Bostjan
Star Office, Latin 2 and many more
Hello ! I have 2 questions: 1) I tried to install old version of Star Office (the only one I have), but I get error message, that I am missing libXm.so.2 ? I guessed it will be part of lesstif package, but I was wrong. Any ideas where to get this library ? Oh, yes. I am not prepared to download new version of Star Office (using only dial-up connection). 2) Does anybody know any usefull word processor for Linux using Latin 2 fonts ? (I know about Lyx, but it doesn't work for me.) I was thinking about Andrew package, but I can't find the type of font option. Thank you, Bostjan -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: Local printing on server
At 06:18 21.1.98 -0700, you wrote: >Bostjan, > > Did you also install LPRng instead of lpr? I recieved the same type of >error when trying to use apsfilter with LPRng. Switched to magicfilter and >everything worked fine. > >Steve Mayer >[EMAIL PROTECTED] > I installed magicfilter and works like magic. Bostjan -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Re: Local printing on server
At 16:50 20.1.98 -0500, you wrote: >On Tue, 20 Jan 1998, Bostjan Jerko wrote: > >>Connection refused >> job 'cfA206debian' trasfer to [EMAIL PROTECTED] failed after 1 >> attempts >> >> I already checked hosts.lpd (ALL and localhost), hosts.allow (ALL, debian >> and localhost) and hosts (localhost, debian). > >/etc/printcap > >Probably worth your time to install magicfilter or apsfilter (but the >latter doesn't have a maintainer anymore). > >Brandon > You will be suprised, but I installed apsfilter. Maybe it was a mistake so I will try with magicfilter. Bostjan -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
Local printing on server
Hello ! I'm trying to use local printer on my server. Every time I want to print using lpr -Pascii name_of_file or lp -dascii name_of_file I get following message: Connection refused job 'cfA206debian' trasfer to [EMAIL PROTECTED] failed after 1 attempts I already checked hosts.lpd (ALL and localhost), hosts.allow (ALL, debian and localhost) and hosts (localhost, debian). Does anybody know what is the problem ? Thanks in advance, Bostjan -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
