Re: debian/sid: yubi key USB error: Access denied (insufficient permissions)
my id output: uid=2201(bruno) gid=2201(bruno) groups=2201(bruno),20(dialout),24(cdrom),25(floppy),29(audio),30(dip),44(video),46(plugdev),108(netdev),110(lpadmin),113(scanner),119(bluetooth),999(bumblebee),2202(ssh-user) my debian/sid is a system continuously updated since years, so it could be that something is missing.. What components are responsible to give a user access to usb devices? On 11/15/2015 10:37 PM, Sven Hartge wrote: > I am using a Yubikey myself, for KeePass and other things and I never > had to do anything special to do so. ykinfo works for me as a normal > user. > > Maybe this has something to do with the groups you user is in. Please > provide the output of "id" from your user.
debian/sid: yubi key USB error: Access denied (insufficient permissions)
Hi, I'm using debian/sid. Where do I configure the USB permissions so that I can run commands as a regular user: $ ykinfo -s USB error: Access denied (insufficient permissions) $ ykpamcfg -v -2 USB error: Access denied (insufficient permissions) ykinfo run as root works as expected .. Thanks in advance for any hints. Bruno
Brother QL-1060N label printer: unwanted media feed after print job
Hi, is there any body out there using the Brother QL label printer series under debian/wheezy? I'm printing labels via CUPS lp command and postscript files to an QL-1060N with 62mm width continuous roll. I'm facing the problem that after the print job is finished and the label is cut as expected, that the printer driver after a short pause seems to submit an media feed so that 1 inch (2,54cm) of blank media is advanced and is sticking in front of the next printed label. I can only circumvent this by manually pressing the cut button on the printer before submitting the next print label job. I have taken a look on the source of the printer driver printer-driver-ptouch 1.3-4 but was not yet able to find the code that must be changed to suppress the media advance. Same result with v1.3-7 from testing/unstable. I also tried the driver from brother, which does not advance the media *afte*r the job, but unfortunately prints 1,5 inch blank media *before* the actual label data.. http://www.brother.com/cgi-bin/agreement/agreement.cgi?dlfile=http://www.brother.com/pub/bsc/linux/dlf/ql1060ncupswrapper-1.0.1-0.i386.deblang=English_gpl Any hints are greatly appreciated.. My CUPS printer queue definition: . Queue Name: labelprt62c Description:Brother QL-1060N 62mm width continuous roll Driver: Brother QL-550 Foomatic/ptouch (recommended) (grayscale, 2-sided printing) Connection: socket://mydomain.bla:9100 Defaults: job-sheets=none, none media=unknown sides=one-sided . Set Default options: . General Page Size: Custom Width: 62 Height: 68 Units: Millimeters Print Quality: High quality Concatenate Pages: IndividualPages Mirror Print: Normal Negative Print: PositivePrint Print Density: Dark Roll Fed Media: Continuous roll Finishing Advance Distance: None Advance Media: Do not advance the tape Auto Cut: Cut the medium after each label Printer Specifics Align: Center aligned Bytes Per Line: 90 Label Preamble: LabelPreamble Software Mirror:HardwareMirror WR, Bruno PS: Are there any other recommandable label printers that work under debian CUPS ? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/525432f9.8040...@voigt.tv
Debian Wheezy Xen HP-Tools on DL380 G7 - hpasmlited general protection fault
Hi @all, I have a problem with HP-Tools on Debian/Wheezy/amd64 running under Xen-Hypervisor on a HP DL380 G7 system. The hp-health package cannot be installed, because the hpasmlited crashes with an general protection fault. Has anyone solved / circumvented this problem ? eg. some kernel/hypervisor acpi options o.ä. .. Is there a newer (Beta-)Version available ? I got the debian packages from the following site: http://downloads.linux.hp.com/SDR/downloads/MCP/pool/non-free/ root@xen:~# dpkg -l|grep hp iF hp-health 9.2.5.1.5-5. amd64hp System Health Application and Command line Utility Package iU hp-smh-templates 9.2.5.1.3-3. all HP System Management Homepage Templates iU hp-snmp-agents 9.2.5.1.9-18. amd64Insight Management SNMP Agents for HP ProLiant Systems ii hpacucli 9.25.2-3. amd64HP Command Line Array Configuration Utility iU hponcfg4.0.1.3-6. amd64RILOE II/iLo online configuration utility ii hpsmh 7.1.2-3.2-4. amd64HP System Management Homepage ii libopenhpi22.14.1-1.2 amd64OpenHPI libraries (runtime and support files) ii openhpid 2.14.1-1.2 amd64OpenHPI daemon, supports gathering of manageability information root@xen:~# dpkg -l|grep linux- ii linux-headers-3.2.0-4-amd643.2.41-2+deb7u2 amd64Header files for Linux 3.2.0-4-amd64 ii linux-headers-3.2.0-4-common 3.2.41-2+deb7u2 amd64Common header files for Linux 3.2.0-4 ii linux-image-3.2.0-4-amd64 3.2.41-2+deb7u2 amd64Linux 3.2 for 64-bit PCs ii linux-image-amd64 3.2+46 amd64Linux for 64-bit PCs (meta-package) ii linux-kbuild-3.2 3.2.17-1 amd64Kbuild infrastructure for Linux 3.2 ii linux-libc-dev:amd64 3.2.41-2+deb7u2 amd64Linux support headers for userspace development ii xen-linux-system-3.2.0-4-amd64 3.2.41-2+deb7u2 amd64Xen system with Linux 3.2 on 64-bit PCs (meta-package) root@xen:~# dpkg -i hp-health_9.2.5.1.5-5._amd64.deb (Reading database ... 47419 files and directories currently installed.) Preparing to replace hp-health 9.2.5.1.5-5. (using hp-health_9.2.5.1.5-5._amd64.deb) ... Using Proliant Standard IPMI based System Health Monitor Already stopped Proliant Standard IPMI based System Health Monitor (hpasmlited): [ SUCCESS ] [ ok ] hp-asrd not running. Unpacking replacement hp-health ... Setting up hp-health (9.2.5.1.5-5.) ... Using Proliant Standard IPMI based System Health Monitor Starting Proliant Standard IPMI based System Health Monitor (hpasmlited): dpkg: error processing hp-health (--install): subprocess installed post-installation script was interrupted Processing triggers for man-db ... Errors were encountered while processing: hp-health less /var/log/messages Jun 5 11:55:58 xen42b kernel: [ 68.013994] hpasmlited[4180] general protection ip:421e4e sp:7fff1752cea8 error:0 in hpasmlited[40+35000] Jun 5 11:55:59 xen42b kernel: [ 69.004762] Event-channel device installed. Jun 5 11:55:59 xen42b kernel: [ 69.175122] ACPI Error: SMBus or IPMI write requires Buffer of length 66, found length 32 (20110623/exfield-285) Jun 5 11:55:59 xen42b kernel: [ 69.175130] ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMM] (Node 88008bcd0ec0), AE_AML_BUFFER_LIMIT (20110623/psparse-536) Jun 5 11:55:59 xen42b kernel: [ 69.175145] ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMM (20110623/power_meter-348) Jun 5 12:07:47 xen42b kernel: [ 776.540702] hpasmlited[5767] general protection ip:421e4e sp:7fff6990b0f8 error:0 in hpasmlited[40+35000] Thanks in advance for any hints, Bruno
Re: Debian Wheezy Xen HP-Tools on DL380 G7 - hpasmlited general protection fault
On 05.06.2013 12:11, Martin Holub wrote: Haven't tried it for myself but maybe the Ubuntu Packages work since the have been built on Kernel 3.2. No idea if it really works but you should give it a try. Otherwise you would need to wait for HP to rebuild the Packages on Wheezy since HP currently has only Squeeze builds. Cheers, Martin I actually used the packages provided by HP for ubuntu/precise. I just tried with the precise kernel and got the same hpasmlited general protection fault :-( Linux xenhost 3.2.0-47-generic #72-Ubuntu SMP Mon Jun 3 17:53:49 UTC 2013 x86_64 GNU/Linux WR, Bruno -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/51af5e27.1060...@voigt.tv
Unstable KDE: How to turn off this annoying desktop auto dimming
Hi List, I'm running Unstable KDE Desktop with the binary NVidia drivers. The whole desktop brightness is changing in several visible steps everytime I'm e.g. switching from a desktop with a web-browser showing a web-site with a dark background and e.g. another desktop showing an application with a light background. How is this feature called ? And how may I turn if off ? TIA, Bruno -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4e1602d5.9000...@voigt.tv
Squeeze DRBD Xen: Kernel Trap/Crash in DRBD
I am using a 2 node Xen+DRBD configuration and always get Dom0 kernel traps in the DRBD module some time after starting PV DomU using some DRBD resources. System type: HP DL360 G6 18 GB of memory installed, 3 GB reserved for Dom0 (dom0_mem=3072M) ii drbd8-utils 2:8.3.7-2.1 ii linux-image-2.6.32-5-xen-amd64 2.6.32-30 ii xen-hypervisor-4.0-amd64 4.0.1-2 ii xen-linux-system-2.6.32-5-xen-amd64 2.6.32-30 ii xen-qemu-dm-4.0 4.0.1-2 ii xen-tools 4.2-1 ii xen-utils-4.0 4.0.1-2 I already disabled + sendpage (in /etc/rc.local: echo 1 /sys/module/drbd/parameters/disable_sendpage) + diverse eth offload options ethtool -K eth0 rx off tx off gso off sg off ethtool -K eth1 rx off tx off gso off sg off ethtool -K eth2 rx off tx off gso off sg off ethtool -K eth3 rx off tx off gso off sg off Does anyone else have experienced similar problems / has found a solution / workaround ? An older configuration based on linux 2.6.26-1-xen-amd64, xen 3.2-1 and self build DRBD 8.3.1 module works fine on the same hardware. Log excerpt: ar 9 13:59:07 xen20a kernel: [ 2344.417046] block drbd0: conn( SyncSource - Connected ) pdsk( Inconsistent - UpToDate ) │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266765] drbd2_receive D 0 3336 2 0x │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266775] 814791f0 0246 8800b6e80e20 │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266785] 8800b6e80e20 f9e0 8800b646ffd8 │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266795] 00015780 00015780 8800b6e80e20 8800b6e81118 │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266804] Call Trace: │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266822] [a03ce7ec] ? drbd_suspend_io+0x76/0x8c [drbd] │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266832] [81065d4a] ? autoremove_wake_function+0x0/0x2e │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266842] [a03d09a7] ? drbd_determin_dev_size+0x29/0x35d [drbd] │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266852] [a03b896f] ? drbd_recv+0x74/0x147 [drbd] │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266861] [a03b896f] ? drbd_recv+0x74/0x147 [drbd] │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266869] [8100e63d] ? xen_force_evtchn_callback+0x9/0xa │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266875] [8100ecf2] ? check_events+0x12/0x20 │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266885] [a03bc726] ? receive_sizes+0x308/0x535 [drbd] │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266895] [a03bffec] ? drbdd_init+0x19c/0x292 [drbd] │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266904] [a03cc701] ? drbd_thread_setup+0x2b/0xf8 [drbd] │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266913] [a03cc6d6] ? drbd_thread_setup+0x0/0xf8 [drbd] │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266919] [81065a7d] ? kthread+0x79/0x81 │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266926] [81012baa] ? child_rip+0xa/0x20 │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266932] [81011d61] ? int_ret_from_sys_call+0x7/0x1b │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266938] [8101251d] ? retint_restore_args+0x5/0x6 │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266945] [8102ddc0] ? pvclock_clocksource_read+0x3a/0x8b │ Ma│Mar 9 14:02:03 xen20a kernel: [ 2520.266951] [81012ba0] ? child_rip+0x0/0x20 │ Thanks in advance for any hints, Bruno -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d7782c7.4070...@voigt.tv
squeeze: xen 4.0.1-2 + drbd8-utils: block-drbd script does no longer work?!
Hi all, I've upgraded an xen+drbd+lvm debian system to squeeze. The DomUs utilize DRBD-ressources for storage (based on local LV) Unfortunately the block-drbd helper script provided by drbd8-utils doesn't seem to work anymore: root@xena:~# xm create -c /etc/xen/bldlenny32.cfg Using config file /etc/xen/bldlenny32.cfg. root@xena:~# Error: Device 51714 (vbd) could not be connected. Hotplug scripts not working. I can start the DomU if a change the domU cfg from disk = [ 'drbd:bldlenny32-disk,xvda2,w', 'drbd:bldlenny32-swap,xvda1,w'] to disk = [ 'phy:/dev/drbd/by-res/bldlenny32-disk,xvda2,w', 'phy:/dev/drbd/by-res/bldlenny32-swap,xvda1,w'] and of course then having to manually changing the DRBD ressource states to primary before start: drbdadm primary bldlenny32-disk bldlenny32-swap The block-drbd helper script works on an older system with debian/lenny (+ some parts of older sid) Does anyone have a working configuration using the drbd: naming scheme? Installed packages: ii drbd8-utils 2:8.3.7-2.1 ii linux-image-2.6.32-5-xen-amd64 2.6.32-30 ii linux-image-xen-amd64 2.6.32+28 ii linux-modules-2.6.26-2-xen-amd64 ii xen-docs-4.04.0.1-2 ii xen-hypervisor-4.0-amd644.0.1-2 ii xen-linux-system-2.6.32-5-xen-amd64 2.6.32-30 ii xen-qemu-dm-4.0 4.0.1-2 ii xen-utils-4.0 4.0.1-2 ii xen-utils-common4.0.0-1 ii xenstore-utils 4.0.1-2 /etc/xen/bldlenny32.cfg: name= 'bldlenny32' kernel = '/boot/vmlinuz-2.6.26-2-xen-amd64' ramdisk = '/boot/initrd.img-2.6.26-2-xen-amd64' extra = 'clocksource=jiffies' memory = '1024' root= '/dev/xvda2 ro' disk= [ 'drbd:bldlenny32-disk,xvda2,w', 'drbd:bldlenny32-swap,xvda1,w', ] dhcp= 'dhcp' vif = [ 'bridge=brvlan1, mac=00:16:3E:40:FB:EE' ] Thanks in advance for any hints, Bruno -- bruno a t voigt.tv -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4d343393.5030...@voigt.tv
Samba reexport of mounted remote CIFS share - HOWTO?
Hi, on my debian/squeeze 2.6.30.5 x86 system I mounted a remote CIFS share and would like to reexport it on my system again via Samba. Is there a way to do it on linux yet ? FreeNAS/BSD seems to be able to do that... Thanks in advance for any hints, Bruno -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: Thinkpad X61s/x301 hotkeys
I have the same problem with a Thinkpad X301, the Suspend2Ram/Suspend2Disk buttons ceased to work with some update in the last two weeks. Yesterday I made a aptitude full-upgrade to sid and KDE 4.2x the problem persists .. Is there a site somehere which explains what components are needed / how they work together to provide this functionality ? WR, Bruno signature.asc Description: OpenPGP digital signature
Re: Thinkpad X61s/x301 hotkeys
Alex Romosan wrote: I have the same problem with a Thinkpad X301, the Suspend2Ram/Suspend2Disk buttons ceased to work with some update in the last two weeks. on my thinkpad t61p i managed to get the suspend to ram button to work by editing /etc/acpi/events/sleepbtn and changing event=button[ /]sleep to event=ibm/hotkey HKEY 0080 1004 i've tried downgrading acpid and acpi-support but i couldn't get suspend to ram to work without the above change. i don't care too much about hibernate so i didn't try to make it work. This has unfortunately no effect here. acpi_listen shows events for the other key combinations, but not for Fn+F4, perhaps it is consumed before ?! Sid+KDE4 seems to be currently in a bad shape, if I try suspend2ram via the KDE4 Leave-menu or via s2ram -f it starts blinking the sleep led and then only terminates the KDE4 session and shows the KDM - login window. WR, Bruno signature.asc Description: OpenPGP digital signature
lenny thinkpad x301 suspend keys
Hi, I wonder how to configure the thinkpad Fn+F4/F12 suspend 2 ram / disk keys. I have installed kmilo, powersaved, kpowersave, acpid, uswsusp, laptop-mode-tools. I am using KDE 3.5.9. Currently nothing happens by pressing these keys. The cmdline utils work, eg. s2ram -f or s2disk, resume to. How work all these tools together? How to put some action on these buttons? BTW: is there a config file for s2ram to have the -f as default ? The system is not pure lenny but has some stuff from unstable, and is running a 2.6.29.2 kernel. TIA, Bruno -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
unstable KDE 3.5 nvidia xinerama dual-screen config maximize windows broken since some days
Hi, I'm running a debian/unstable system + with KDE 3.5 as desktop + using the nvidia-kernel-source/nvidia-glx driver 180.29-1 + two Displays in xinerama configuration. Since an usual aptitude full-upgrade some days ago I have the problem that application/windows upon maximize do it over both displays instead of maximizing only to the current display as I enjoyed it before :-) I'm seeking therefore for some advice what might have broken / how to restore the old behavior. Maybe the meaning of some control center settings has changed? What settings are necessary to have windows maximize only to the active display of a xinerame configuration? Thanks in advance for any hints, WR, Bruno signature.asc Description: OpenPGP digital signature
Re: unstable KDE 3.5 nvidia xinerama dual-screen config maximize windows broken since some days
Sven Joachim wrote: I'm running a debian/unstable system + with KDE 3.5 as desktop + using the nvidia-kernel-source/nvidia-glx driver 180.29-1 + two Displays in xinerama configuration. Since an usual aptitude full-upgrade some days ago I have the problem that application/windows upon maximize do it over both displays instead of maximizing only to the current display as I enjoyed it before :-) Downgrading kdesktop and kdebase-bin to the version in Lenny reportedly fixes this. See http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=518786. The KDE team does not care about this because KDE 4.2 is /ante portas/ in sid. Sven Hello Sven, thanks a lot for the advice. after downgrading kdesktop, kdebase-bin kwin I am happy again. WR, Bruno signature.asc Description: OpenPGP digital signature
Re: KDE desktop unlock fails due to authentication failure
Yannick Effinger wrote: I'm using a daily updated debian/unstable system with KDE desktop. Since about 3-4 week I can no longer succesfully unlock the desktop with my password after auto-lockup (msg: unlock failed..). So after auto-lockup I have to switch to a text VT and kill the kdesktop_lock Hi Bruno, have a look at the files /etc/shadow and /sbin/unix_chkpwd. The owner should be root for the user, and shadow for the group. Hi Yannick, great advise - /etc/shadow group was set to root, after changing it to shadow desktop unlocking works again! Thanks a lot ! Do you have any background information, eg. which package(s) are responsible for /etc/shadow? Should they check for proper file permissions during update? The affected system images were very old I had them initially set up at woody times and ever upgraded since on the sid tree.. WR, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
KDE desktop unlock fails due to authentication failure
Hi, I'm using a daily updated debian/unstable system with KDE desktop. Since about 3-4 week I can no longer succesfully unlock the desktop with my password after auto-lockup (msg: unlock failed..). So after auto-lockup I have to switch to a text VT and kill the kdesktop_lock process. Do I have to adjust some config to make it work again? Reboot did not help. There was a new pam version installed, I don't know if/how it relates to the problem, eg. if some manual changes have to be done which were not automatically handled..etc.. I've found following message - but cannot figure out what's going wrong: [EMAIL PROTECTED]:~$ cat .xsession-errors X Error: BadAccess (attempt to access private resource denied) 10 Major opcode: 2 Minor opcode: 0 Resource id: 0x4e00011 WARNING: DCOPReply: cast to 'QStringList' error WARNING: DCOPReply: cast to 'QString' error Authentication failure TIA, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
sid: KDE desktop unlock fails
Hi, I'm using a daily updated debian/unstable system with KDE desktop. Since about 2-3 week I can no longer succesfully unlock the desktop with my password after auto-lockup (msg: unlock failed..). So after auto-lockup I have to switch to a text VT and kill the kdesktop_lock process. Do I have to adjust some config to make it work again? Reboot did not help. There was a new pam version installed, I don't know if/how it relates to the problem, eg. if some manual changes have to be done which were not automatically handled..etc.. TIA, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
debian/unstable: KDE unlock not possible, have to kill kdesktop_lock
Hi, I'm using a daily updated debian/unstable system with KDE desktop. Since about a week I can no longer succesfully unlock the desktop with my password after auto-lockup (authentification failed..). So after auto-lockup I have to switch to a text VT and kill the kdesktop_lock process. Do I have to adjust some config to make it work again? TIA, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
debian/unstable: linux 2.6.24 + am-utils NFS-automount doesn't work
Hi all, I'm running an daily updated unstable system with also custom built recent kernel.org kernels. Unfortunately If I try a 2.6.25 or 2.6.26 kernel the am-utils NFS automount doesn't seem to work any more, eg. cd /net/myhost.domain/.. Is there something that must be adjusted in either the am-utils config or the kernel configuration?! With a kernel revision like 2.6.24.x everything is fine.. TIA, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: debian/unstable: KDE unlock not possible, have to kill kdesktop_lock
There also was a pam update installed I've rebooted the system, problem stays there. Eugene V. Lyubimkin wrote: Bruno Voigt wrote: Hi, I'm using a daily updated debian/unstable system with KDE desktop. Since about a week I can no longer succesfully unlock the desktop with my password after auto-lockup (authentification failed..). So after auto-lockup I have to switch to a text VT and kill the kdesktop_lock process. Do I have to adjust some config to make it work again? TIA, Bruno Had you updated pam recently? Did you try to restart X?
Re: debian/unstable: linux 2.6.24 + am-utils NFS-automount doesn't work
I want the kernel.org one not debian ones. Do you have any knowledge about available patches specific to this am-utils problem with kernel 2.6.24 ? Eugene V. Lyubimkin wrote: Bruno Voigt wrote: Hi all, I'm running an daily updated unstable system with also custom built recent kernel.org kernels. Debian kernel contains patches, consider trying last official kernel package.
Re: debian/unstable: iceweasel segmentation fault
Florian Kulzer wrote: Based on what Kent has posted, can you run iceweasel as root? Yes. that works. I am also using KDE, the kde package was in state pn, so I reinstalled it. Iceweasel still crashes when run as normal user. After it has crashed, grep for EACCES in the strace file; that should tell you which files it cannot access due to permissions problems. In my normal user trace I see no EACCES. WR, Bruno signature.asc Description: OpenPGP digital signature
Re: debian/unstable: iceweasel segmentation fault
Florian Kulzer wrote: Well, so much for that idea... Maybe this is related to arts; I now remember that I had problems with iceweasel a while back when I tried to get sound from a bluetooth headset via artsdsp. Try to run it like this: ICEWEASEL_DSP=none iceweasel I use KDE 3.5.9 myself and iceweasel works fine. However, if I set ICEWEASEL_DSP=artsdsp then I get a segfault, too. The strace output of that looks similar to yours; it also ends with an lstat of /usr/lib/iceweasel, followed by a futex and a SIGSEGV. That works - Great ! Are you using Iceweasel with sound ? What alternative did you configure? Where may I change this configuration globally? Just in /etc/profile specifically for iceweasel or somewhere (KDE Control Center?) for all apps? Florian, Thanks a lot for your investigation ! WR, Bruno signature.asc Description: OpenPGP digital signature
Re: debian/unstable: iceweasel segmentation fault
Florian Kulzer wrote: What alternative did you configure? I do not set ICEWEASEL_DSP anywhere, so iceweasel uses the default value of none. Did you configure anything for this environmental variable? Check it with env | grep ICE. Where may I change this configuration globally? Just in /etc/profile specifically for iceweasel or somewhere (KDE Control Center?) for all apps? I would set it both in your shell's profile/rc-file and in ~/.kde/env/env.sh, see man startkde. (The setting in the shell profile/rc will not work if you start iceweasel from a desktop menu or by clicking an icon.) Make sure you use export ICEWEASEL_DSP=none. I just found [EMAIL PROTECTED]:/# cat /etc/iceweasel/iceweaselrc # which /dev/dsp wrapper to use ICEWEASEL_DSP=auto I changed it to none and everything is fine now :-) Bruno signature.asc Description: OpenPGP digital signature
debian/unstable: iceweasel segmentation fault
I'm currently not able to start iceweasel ii iceweasel 3.0.1-1 lightweight web browser based on Mozilla ii iceweasel-gnome-support 3.0.1-1 Support for GNOME in Iceweasel Same result as with 3.0~rc2-2 0: [EMAIL PROTECTED]:~$ iceweasel Segmentation fault [EMAIL PROTECTED]:~$ iceweasel -safe Segmentation fault System ist debian/unstable uptodate. On other debian/unstable systems it still works. Could it be caused by other packages/plugin? How to debug the cause? TIA + WR, Bruno signature.asc Description: OpenPGP digital signature
Re: debian/unstable: iceweasel segmentation fault
Nyizsnyik Ferenc wrote: On Sun, 20 Jul 2008 11:40:32 +0200 Bruno Voigt [EMAIL PROTECTED] wrote: I'm currently not able to start iceweasel ii iceweasel 3.0.1-1 lightweight web browser based on Mozilla ii iceweasel-gnome-support 3.0.1-1 Support for GNOME in Iceweasel Same result as with 3.0~rc2-2 0: [EMAIL PROTECTED]:~$ iceweasel Segmentation fault [EMAIL PROTECTED]:~$ iceweasel -safe Segmentation fault System ist debian/unstable uptodate. On other debian/unstable systems it still works. Could it be caused by other packages/plugin? How to debug the cause? TIA + WR, Bruno The first thing to try is mv ~/.mozilla ~/.mozilla.old. Sure, I tried it with a fresh user account, so I believe it must be some global cause. WR, Bruno signature.asc Description: OpenPGP digital signature
Re: debian/unstable: iceweasel segmentation fault
Florian Kulzer wrote:
On Sun, Jul 20, 2008 at 08:22:38 -0500, Kent West wrote:
Bruno Voigt wrote:
I'm currently not able to start iceweasel
ii iceweasel 3.0.1-1
lightweight web browser based on Mozilla
ii iceweasel-gnome-support 3.0.1-1
Support for GNOME in Iceweasel
Same result as with 3.0~rc2-2 0:
[EMAIL PROTECTED]:~$ iceweasel
Segmentation fault
[EMAIL PROTECTED]:~$ iceweasel -safe
Segmentation fault
System ist debian/unstable uptodate.
On other debian/unstable systems it still works.
I just updated a box yesterday and am seeing the same problem. I haven't
had time to debug it yet, but one thing I noticed is that when I run ldd
against /usr/bin/iceweasel, it dies also. This leads me to believe the
problem is deeper than a mere iceweasel problem.
If you run
ldconfig -pNX | grep local
, what do you see? Does that crash, too?
[EMAIL PROTECTED]:~# ldconfig -pNX | grep local
libsvn_ra_local-1.so.1 (libc6) = /usr/lib/libsvn_ra_local-1.so.1
libspandsp.so.0 (libc6) = /usr/local/lib/libspandsp.so.0
libspandsp.so (libc6) = /usr/local/lib/libspandsp.so
libiax.so.0 (libc6) = /usr/local/lib/libiax.so.0
libiax.so (libc6) = /usr/local/lib/libiax.so
[EMAIL PROTECTED]:~#
Also try
strace -f iceweasel --safe-mode
and post the last 10-20 lines of the output. (You have to install the
package strace if it is not on your system already.)
open(/usr/lib/iceweasel/libgcc_s.so.1, O_RDONLY) = -1 ENOENT (No such
file or directory)
open(/usr/lib/iceweasel/plugins/libgcc_s.so.1, O_RDONLY) = -1 ENOENT
(No such file or directory)
open(/usr/lib/mozilla-firefox/plugins/libgcc_s.so.1, O_RDONLY) = -1
ENOENT (No such file or directory)
access(/etc/ld.so.nohwcap, F_OK) = -1 ENOENT (No such file or
directory)
open(/lib/libgcc_s.so.1, O_RDONLY)= 3
read(3,
\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\220\34\0\0004\0\0\0\264...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=49644, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb7ce2000
mmap2(NULL, 52776, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0)
= 0xb7cd5000
mmap2(0xb7ce1000, 4096, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xb) = 0xb7ce1000
close(3)= 0
open(/usr/lib/iceweasel/libm.so.6, O_RDONLY) = -1 ENOENT (No such file
or directory)
open(/usr/lib/iceweasel/plugins/libm.so.6, O_RDONLY) = -1 ENOENT (No
such file or directory)
open(/usr/lib/mozilla-firefox/plugins/libm.so.6, O_RDONLY) = -1 ENOENT
(No such file or directory)
access(/etc/ld.so.nohwcap, F_OK) = -1 ENOENT (No such file or
directory)
open(/lib/libm.so.6, O_RDONLY)= 3
read(3,
[EMAIL PROTECTED]...,
512) = 512
fstat64(3, {st_mode=S_IFREG|0644, st_size=149328, ...}) = 0
mmap2(NULL, 151680, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3,
0) = 0xb7caf000
mmap2(0xb7cd3000, 8192, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x23) = 0xb7cd3000
close(3)= 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0xb7cae000
set_thread_area({entry_number:-1 - 6, base_addr:0xb7cae8e0,
limit:1048575, seg_32bit:1, contents:0, read_exec_only:0,
limit_in_pages:1, seg_not_present:0, useable:1}) = 0
mprotect(0xb7e33000, 4096, PROT_READ) = 0
mprotect(0xb7f1c000, 12288, PROT_READ) = 0
munmap(0xb7f2b000, 158926) = 0
set_tid_address(0xb7cae928) = 19982
set_robust_list(0xb7cae930, 0xc)= 0
futex(0xbfe2aa10, FUTEX_WAKE_PRIVATE, 1) = 0
rt_sigaction(SIGRTMIN, {0xb7ce7280, [], SA_SIGINFO}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0xb7ce7680, [], SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
uname({sys=Linux, node=wks.voigt.tv, ...}) = 0
lstat64(/usr, {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
lstat64(/usr/lib, {st_mode=S_IFDIR|0755, st_size=233472, ...}) = 0
lstat64(/usr/lib/iceweasel, {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0
futex(0xb7f2a070, FUTEX_WAKE_PRIVATE, 2147483647) = 0
--- SIGSEGV (Segmentation fault) @ 0 (0) ---
+++ killed by SIGSEGV +++
I do not know if it is relevant,
I'm using a custom kernel configuration.
[EMAIL PROTECTED]:~/$ uname -a
Linux wks.voigt.tv 2.6.24.4-wks.voigt.tv #1 SMP PREEMPT Mon May 26
23:57:30 CEST 2008 i686 GNU/Linux
Iceweasel 3.0~rc2 worked on it until some unstable update about 14-20
days ago.
WR,
Bruno
signature.asc
Description: OpenPGP digital signature
debian: how to build package of drbd 8.2.5 / 8.2.6rc
Hi, I'm currently using the binary drbd8-utils/module packages 8.2.4-1 from debian/experimental and would like to upgrade to a newer drbd version. Was anyone succesful in building debian packages from the 8.2.5 or 8.2.6rc sources from drbd.org ? Unfortunately the debian build stuff in the git - repository doesn't seem to work any more: [EMAIL PROTECTED]:/usr/src# git clone git://git.drbd.org/drbd-8.2 [EMAIL PROTECTED]:/usr/src/drbd-8.2# ./debian/rules binary dh_testdir /usr/bin/make -C user make[1]: Entering directory `/usr/src/drbd-8.2/user' flex -s -odrbdadm_scanner.c drbdadm_scanner.fl gcc -g -O2 -c -W -Wall -I../drbd -c -o drbdadm_scanner.o drbdadm_scanner.c gcc -g -O2 -c -W -Wall -I../drbd -c -o drbdadm_parser.o drbdadm_parser.c gcc -g -O2 -c -W -Wall -I../drbd -c -o drbdadm_main.o drbdadm_main.c gcc -g -O2 -c -W -Wall -I../drbd -c -o drbdadm_adjust.o drbdadm_adjust.c gcc -g -O2 -c -W -Wall -I../drbd -c -o drbdtool_common.o drbdtool_common.c gcc -g -O2 -c -W -Wall -I../drbd -c -o drbdadm_usage_cnt.o drbdadm_usage_cnt.c make[1]: *** No rule to make target `../drbd/drbd_buildtag.c', needed by `drbd_buildtag.c'. Stop. make[1]: Leaving directory `/usr/src/drbd-8.2/user' make: *** [build-arch-stamp] Error 2 TIA, Bruno signature.asc Description: OpenPGP digital signature
Re: sid: USB-stick - /dev/disk/by-id/ not populated
Florian Kulzer wrote: Thanks for your reply! Has the hotplug package been purged (not just removed) on the old system? Yes, I purged it as advised by the NEWS. In any case, you can use udevtest to see which rules are applied. Here is an example for a usb stick at /dev/sdc: $ udevtest /block/sdc/sdc1 | egrep 'persistent\.rules|by-id' parse_file: reading '/etc/udev/rules.d/z20_persistent.rules' as rules file udev_rules_get_name: add symlink 'disk/by-id/usb-Prolific_Technology_Inc._USB_Mass_Storage_Device-part1' udev_node_update_symlinks: update symlink 'disk/by-id/usb-Prolific_Technology_Inc._USB_Mass_Storage_Device-part1' of '/block/sdc/sdc1' udev_db_get_devices_by_name: found index directory '/dev/.udev/names/disk\x2fby-id\x2fusb-Prolific_Technology_Inc._USB_Mass_Storage_Device-part1' update_link: found 1 devices with name 'disk/by-id/usb-Prolific_Technology_Inc._USB_Mass_Storage_Device-part1' update_link: found '/block/sdc/sdc1' for 'disk/by-id/usb-Prolific_Technology_Inc._USB_Mass_Storage_Device-part1' update_link: 'disk/by-id/usb-Prolific_Technology_Inc._USB_Mass_Storage_Device-part1' with target 'sdc1' has the highest priority 0, create it Only the first line is shown: [EMAIL PROTECTED]:~# udevtest /block/uba/uba1 | egrep 'persistent\.rules|by-id' parse_file: reading '/etc/udev/rules.d/z20_persistent.rules' as rules file I'm using a selfcompiled kernel 2.6.25.4 (previosuly 2.6.24.4), are there any special config options needed ? Here is a excerpt from the syslog after plugging the stick: May 27 23:47:38 host kernel: usb 1-1: new high speed USB device using ehci_hcd and address 4 May 27 23:47:38 host kernel: usb 1-1: configuration #1 chosen from 1 choice May 27 23:47:38 host kernel: uba: uba1 May 27 23:47:38 host kernel: usb 1-1: New USB device found, idVendor=0781, idProduct=5151 May 27 23:47:38 host kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 May 27 23:47:38 host kernel: usb 1-1: Product: Cruzer Micro May 27 23:47:38 host kernel: usb 1-1: Manufacturer: SanDisk Corporation May 27 23:47:38 host kernel: usb 1-1: SerialNumber: SNDKB749E40AD9708702 WR, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
sid: USB-stick - /dev/disk/by-id/ not populated
Hi all, I have one daily updated sid system running, which doesn't populate the /dev/disk/by-id/ path for an connecting USB-stick (w32 FAT) as it is done by my other sid systems. (it only shows up as eg /dev/uba1) I compared the /etc/udev/rules.d/ contents and they look very similar, e.g. persistent.rules is identical. Which rule/file is responsible for populating the /dev/disk/by-id/ path. How can I debug what's going on? I suspect it might be some left over cfg from older udev-releases or so, because the system is very old / always being upgraded from sarge/or older. TIA for any hints, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
xen 3.2 - usage with DRBD for Windows/HVM DomU's..
Hi, I'm running debian/unstable with drbd from experimental on a 2 node xen/drbd cluster ii linux-image-2.6.18-6-xen-amd64 ii xen-hypervisor-3.2-1-amd64 3.2.0-2 ii xen-utils-3.2-1 3.2.0-2 ii xen-utils-common 3.1.0-1 ii drbd8-source 2:8.2.4-1 ii drbd8-utils 2:8.2.4-1 I want to start windows from a DRBD - Device, similar to how I did it succesfully for linux guests. But the disk definition doesn't work: disk = [ 'drbd:win-disk,ioemu:hda,w'] The DomU starts but the BIOS says it finds no disk. The following cfg instead works, but I have to manually call drbdadm primary win-disk and I had to patch /usr/lib/xen-3.2-1/lib/python/xen/xend/image.py to not check that /dev/drbd15 is a regular file... disk = [ 'file:/dev/drbd15,ioemu:hda,w'] Perhaps the xen-script of the drbd8-utils has to passthru the ioemu param or something like that?? Thanks in advance for any hints!! /etc/xen/win.cfg: == kernel = '/usr/lib/xen-3.2-1/boot/hvmloader' builder= 'hvm' memory = 1024 shadow_memory = 8 name = win vcpus=2 vif = [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=brvlan94, model=ne2k_pci' ] disk = [ 'file:/dev/drbd15,ioemu:hda,w'] #disk = [ 'drbd:win-disk,ioemu:hda,w'] device_model ='/usr/lib/xen-3.2-1/bin/qemu-dm' boot=c sdl=0 vnc=1 vnclisten=0.0.0.0 vncconsole=1 == WR, Bruno -- [EMAIL PROTECTED] signature.asc Description: OpenPGP digital signature
sid/xinerama: how to start app on specific screen
Hi all, I'm running sid with a nvidia xinerama configuration with 2 displays. Is it possible to modify the start icon for eg. icedove so that this apps starts maximized on the right display only and with the show on every desktop feature enabled ? Thanks for any hints, Bruno -- [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: fglrx-driver 8.43.2-1 doesnt detect FireGL5200 on Thinkpad Z61p
Anthony Campbell wrote: On 03 Dec 2007, Bruno Voigt wrote: robin putters wrote: Not yet, but work has started on 2D acceleration, and the driver is developing rapidly. In a couple of months(weeks?) time, you will have much better driver than vesa ever was, and probably better in 2D than fglrx. And you will be doing the radeonhd driver developers a huge favor by testing these drivers. Go ahead: # apt-get install xserver-xorg-video-radeonhd Hi Robin, thanks for your hint. I will certainly try this one and provide feedback. WR, Bruno I just tried it in my Thinkpad Z61M (Mobile X1400) and it seems to be working well in 2D. Anthony I've switch from vesa to the radonhd driver and it worked instantly on my Z61p/FireGL5200. Although I cannot see a difference. Does anyone have success/experience with any driver and + switch to/from external monitor/beamer/projector (with different resolution) + suspend2disk/ram WR, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
fglrx-driver 8.43.2-1 doesnt detect FireGL5200 on Thinkpad Z61p
Hi all, the newer fglrx-driver 8.43.2-1 doesn't anymore detect my Thinkpad Z61p FireGL5200 graphics. The last working version was 8.40.4-2, which unfortunately doesn't work with linux kernel 2.6.23.x .. What is this cause, what can I do about it? TIA, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: fglrx-driver 8.43.2-1 doesnt detect FireGL5200 on Thinkpad Z61p
robin putters wrote: On 12/3/07, Bruno Voigt [EMAIL PROTECTED] wrote: the newer fglrx-driver 8.43.2-1 doesn't anymore detect my Thinkpad Z61p FireGL5200 graphics. The last working version was 8.40.4-2, which unfortunately doesn't work with linux kernel 2.6.23.x .. FireGL cards are still not supported with 8.43 . (See the Catalyst 7.11 release notes). Try the RadeonHD drivers (if 3D is not that important for you), or check phoronix.com/forums , there is a trick (binary patch afaik) which lets you use the FireGL cards with 8.43 Currently I'm using the VESA driver which fortunately supports the 1920x1200 res, but wondering why they drop support for some chips with a newer release. Would there be currently advantage using the radeonhd driver instead of VESA, I'm not using any 3D stuff..? WR, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: fglrx-driver 8.43.2-1 doesnt detect FireGL5200 on Thinkpad Z61p
robin putters wrote: Not yet, but work has started on 2D acceleration, and the driver is developing rapidly. In a couple of months(weeks?) time, you will have much better driver than vesa ever was, and probably better in 2D than fglrx. And you will be doing the radeonhd driver developers a huge favor by testing these drivers. Go ahead: # apt-get install xserver-xorg-video-radeonhd Hi Robin, thanks for your hint. I will certainly try this one and provide feedback. WR, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Asus P5k SE Debian Etch
rgr wrote: Has anything more come of this? I have tried etch-custom with no joy. Anyone? I have the same Mobo as the OP. Asus p5K SE. It boots from the dvd but fails to mount it saying no cdrom found. There doesn't appear to be a suitable device node when examining /dev from a terminal either. (Same with Ubuntu Feisty FWIW) Put the harddisk in another system and copy your existing debian installation or install a new one via deboostrap. Then chroot into this installation, download compile the linux kernel v 2.6.22.6 with desired options (SATA AHCI..Attansic Gigabit Ethernet) install it, also dont forget to install grub on the disk and put it back into to the P5K SE system. So with an recent kernel all features of the board work as expected WR, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
cron-apt configuration
Hi all, I have several debian/unstable machines with cron-apt installed without manual changing it's config (as I remember). All machines but one are just updating the package lists. The special one is also downloading all upgradeable packages, so by the time I enter aptitude dist-upgrade all files are already present. My question is now: Where may I configure this behaviour ? Diffing the /etc/cron-apt/* files didn't gave me a clue.. TIA, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Traffic shaping for PPPoE / DSL, prio for VoIP
Hi all, what is the best way on a debian/unstable box to set up traffic shaping on a ppp interface (PPPoE/DSL) so that VoIP-Traffic (Asterisk is running on this box) is prioritized in favor of other traffic ? Which debian packages are suitable for this task? Are there any sample configurations ? TIA, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: WEP is possible, WPA not (wpa_supplicant)
I had a similar problem with a Thinkpad Z61p and intel 3945 card connecting to a netgear 302 accesspoint. There was no chance to get them communicating. After dumping the netgear and using a d-link ap instead wpa2 worked for me instantly. WR, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: debian/unstable+KDE: screensaver/lock session not working SOLVED
Florian Kulzer [EMAIL PROTECTED] schrieb am 05.02.2007 17:01:39: So what global config shall I check next? If you try to run the following command /usr/bin/kdesktop_lock --forcelock Ahh.. I had installed these packages: ii kdebluetooth 0.99+1.0beta2-3KDE Bluetooth Framework ii kdesktop 3.5.5a.dfsg.1-5 miscellaneous binaries and files for the KDE desktop dpkg -L kdesktop showed: /usr/bin/kdesktop_lock diverted by kdebluetooth to: /usr/bin/kdesktop_lock_nobt So there wasn't a /usr/bin/kdesktop_lock. After removing kdebluetooth the lock session button works again. Interesstingly on a system with a fresh debian/unstable install with the same version of the kdesktop and kdebluethooh package this file isn't diverted. After purging and installing kdebluetooth again there is no more diversion. So it must have been a upgrade issue in some version of kdebluetooth. Thanks for your hints, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
debian/unstable+KDE: screensaver/lock session not working
Hi all, I have a debian/unstable box running KDE which gets nearly daily patched. For some months ago the screensaver and KDE kicker lock session button stopped working. manual starting of xscreensaver running xscreensaver-command -lock works. How does the kdscreensaver session lock mechanism work in detail? How do teh different components interact? How can I trace its execution path and check if everything is in place? What config files are used? Purging and reinstalling these packages didn't help: ii kscreensaver 3.5.5-1 additional screen savers released with KDE ii kscreensaver-xsavers 3.5.5-1KDE hooks for standard xscreensavers ii xscreensaver 4.24-5 Automatic screensaver for X ii xscreensaver-gl 4.24-5 GL(Mesa) screen hacks for xscreensaver TIA, Brun -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: debian/unstable+KDE: screensaver/lock session not working
Florian Kulzer [EMAIL PROTECTED] schrieb am 05.02.2007 14:39:10: AFAIK, KDE does not use xscreensaver but provides its own screensaver (and locking) functionality as a part of the kdesktop process (which is normally started by kdeinit). You can check if kdesktop is running with ps -ef | grep [k]desktop. You should see the process listed as kdesktop [kdeinit]. (It is very unlikely that kdesktop is not running when you have a KDE session, but it does not hurt to check.) yes kdesktop [kdeinit] is there. How do the different components interact? How can I trace its execution path and check if everything is in place? I don't know all the details, but I know that you should be able to lock the screen under KDE with the following command: dcop kdesktop KScreensaverIface lock Maybe that will give you a helpful error message if it does not work; also check ~/.xession-errors for anything related to the screensaver. the above dcop invocation just returns immediately without output. No output in .xsession-errors What config files are used? ~/.kde/share/config/kdesktoprc This configuration works for me: $ awk '/\[ScreenSaver\]/,/^$/' ~/.kde/share/config/kdesktoprc [ScreenSaver] DPMS-dependent=false Enabled=true Lock=true LockGrace=6 Saver=KRandom.desktop Timeout=300 I adjusted the section in my file to be the same. It doesn't help. If all else fails you can create a new user and test if that user can lock the screen normally. That will at least tell you if you have a system-wide problem or one related to your regular user's configuration. Lock Session doesn't work for a new user either. So what global config shall I check next? TIA, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Laptop Recommendations? Thinkpad
Anthony Campbell [EMAIL PROTECTED] schrieb am 02.02.2007 09:34:50: I've just acquired a Lenovo Thinkpad Z61M and am still in the process of setting up Debian on it. It's a beautiful machine, if expensive. Last time I bought a Thinkpad, about 2 years ago, I deleted all traces of Windows. This time I decided to keep it, mainly because about once or twice a year I need to test some Windows programme or other. The reason quoted above is another which I hadn't thought of. Keeping Windows was quite a struggle because I had difficulties shrinking the partition (discussed elsewhere on this list). I finally managed it after a day and a half. I nearly gave up but it did work in I installed Debian/unstable on a new Thinkpad Z61p. Unfortunately my usual procedure using netboot Debian-NetInstaller didn't work, because it didnt liked the Broadcom TG3 ethernet. So I booted from Knoppix v5.11 DVD to + first use gparted to shrink the WinXP-Partition to 10GB + added new partitions for Linux boot, root and SWAP + setup cryptsetup-luks on new root + installed debian with debootstrap + install grub + installed the ATI fglrx-driver from experimental, although the VESA one also works with 1920x1200 + using customized kernel 2.6.19.2 from ftp.kernel.org Thanks to www.thinkwiki.org I got all the devices working, eg. HDASP hardisk-protection, Intel 3945 WLAN, battery, thinkpad control stuff (ibm-acpi) etc. Even the fingerprint reader works using the great young stuff from thinkfinger.sf.net. Suspend to Disk via uswusp s2disk sometimes rejects to do it, I haven't found out the offending driver/circumstances yet. Also I noticed that after resume the display output is very very slow, but I expect that to be hopefully fixed in near future by ATI/newer kernel?! So overall I'm happy with it. Negative points: The Z61p BIOS doesn't proivide a switch to Enable the Core2DUo VT-functionality yet. On the X60's and T60 it is already available. That prevented me to use Xen HVM. Hopefully Lenovo will add this feature with the next BIOS otherwise it would be a major cripple of this Core2Duo-System. I also tried unsuccesfully to start the shrinked WinXP partition under VMWare server using a separate hardware-profile, but it keeps dying BSOD upon boot. Anyone managed to do this without a new clean WinXP-install? WR, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Laptop Recommendations? Thinkpad Sound
Anthony Campbell [EMAIL PROTECTED] schrieb am 02.02.2007 15:30:57: because it didnt liked the Broadcom TG3 ethernet. [snip] Same here. I used a pcmcia card (still using it in fact because Broadcom still not working). The www.kernel.org pristine kernel works with it, I downloaded the source and build the kernel package myself using make-kpg.. Did you get sound to work? I've configured it with alsaconf and it went off correctly but no sound apart from beep. No idea how to solve this. Sounds works for me: dpkg -l alsa* ii alsa-base1.0.13-3 ALSA driver configuration files ii alsa-oss 1.0.12-1 ALSA wrapper for OSS applications ii alsa-utils 1.0.13-2 ALSA utilities ii alsamixergui 0.9.0rc2-1-9 graphical soundcard mixer for ALSA soundcard ii alsaplayer 0.99.76-0.3sarge1 PCM player designed for ALSA ii alsaplayer-common0.99.76-9 PCM player designed for ALSA (common files) ii alsaplayer-gtk 0.99.76-9 PCM player designed for ALSA (GTK version) ii alsaplayer-oss 0.99.76-9 PCM player designed for ALSA (OSS output mod lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: NTP dynamic servers?
Jacques Normand wrote: I'm running debian/unstable on my laptop and often the LAN/WLAN is not connected (yet) when the system is starting up - including NTPD. NTPD then seems to discard all unreachable server entries and ends up with no peers left. In some googled doc I found the ntp.conf option dynamic to tell it that some peers may become available later on, but the debian ntpd doesnt't seem to understand it - or I don't know how to use it correctly. What is the best way to configure the ntpd in such an environment ? How about calling the init.d script from /etc/network/interfaces? I mean, there is little need for having the deamon running while offline and providing that your clock does not drift too much, that should do it. That is hard to configure reliable because of stuff like openvpn that also needs a varying timespan to settle etc.. So I would really like to know a way to tell ntpd to not give up on a server entry if it is not reachable/resolvable on the first try: Jan 23 21:06:27 europa ntpd_initres[5255]: host name not found: 0.debian.pool.ntp.org │ Jan 23 21:06:27 europa ntpd_initres[5255]: couldn't resolve `0.debian.pool.ntp.org', giving up on it │ Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
KDE double-click for icons on desktop?
Hi, I have a fresh installed debian/unstable with KDE. Please give me detailed instructions where to find the setting in the KDE Control Center, the checkbox - to tell KDE that I want to start apps on the desktop via double-click instead of single-click. I can't locate it :-(( TIA, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: KDE double-click for icons on desktop?
Florian Kulzer wrote: Please give me detailed instructions where to find the setting in the KDE Control Center,the checkbox - to tell KDE that I want to start apps on the desktop via double-click instead of single-click. Open the Control Center and go to Peripherals Mouse. The setting you want is on the General tab in the Icons field; it is called Double-click to open files and folders (select icons on first click) You can adjust the double-click interval on the Advanced tab. Thanks a lot - For some reason I didn't expect it under the mouse-settings, and checked instead other and other again the apperance desktop settings ;-) bye, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
NTP dynamic servers?
Hi, I'm running debian/unstable on my laptop and often the LAN/WLAN is not connected (yet) when the system is starting up - including NTPD. NTPD then seems to discard all unreachable server entries and ends up with no peers left. In some googled doc I found the ntp.conf option dynamic to tell it that some peers may become available later on, but the debian ntpd doesnt't seem to understand it - or I don't know how to use it correctly. What is the best way to configure the ntpd in such an environment ? TIA, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
unstable: guessnet doesnt work
Hi all, I have installed ifplugd and guessnet on latest debian/unstable. My configuration does not work as expected, The system is attached with eth1 to lanb but guessnet fails to detect it and chooses the default dhcp. I do not understand why. How can I debug it further? Why is the arping help message printed? TIA, Bruno europa:~# cat /etc/network/interfaces auto lo iface lo inet loopback auto eth1 allow-hotplug eth1 mapping eth1 script guessnet-ifupdown map lana lanb dhcp map init-time: 5 map timeout: 10 map default: dhcp map verbose: true map debug: true iface lana inet dhcp test1 peer address 192.168.52.80 mac 00:0E:A6:1C:1F:95 dns-search .test1.de iface lanb inet static test1 peer address 172.17.33.254 mac 00:00:0C:09:AC:08 address 172.17.33.85 broadcast 172.17.33.254 netmask 255.255.255.0 gateway 172.17.33.254 dns-search .test2.de iface dhcp inet dhcp dns-search .test3.de europa:/# ifup eth1 guessnet: 2 candidates found in input guessnet: Guessnet 0.41 starting... guessnet: Trying MII detection guessnet: 2 candidate profiles guessnet: Trying MII detection guessnet: Initialized test subsystems guessnet: Added default test dhcp guessnet: Default test is dhcp guessnet: Will check network lana for IP address 192.168.52.80 (MAC 00:0e:a6:1c:1f:95) guessnet: Starting peer test subsystem guessnet: Sending 10 ARP probes, 1 every second... guessnet: Will check network lanb for IP address 172.17.33.254 (MAC 00:00:0c:09:ac:08) guessnet: Sending 10 ARP probes, 1 every second... guessnet: Listen ARP guessnet: Started tests guessnet: 3 candidates Internet Systems Consortium DHCP Client V3.0.4 Copyright 2004-2006 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/eth1/00:16:36:bf:65:d6 Sending on LPF/eth1/00:16:36:bf:65:d6 Sending on Socket/fallback DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5 DHCPOFFER from 172.17.33.252 DHCPREQUEST on eth1 to 255.255.255.255 port 67 DHCPACK from 172.17.33.252 bound to 172.17.33.85 -- renewal in 34258 seconds. Usage: arping [-fqbDUAV] [-c count] [-w timeout] [-I device] [-s source] destination -f : quit on first reply -q : be quiet -b : keep broadcasting, don't go unicast -D : duplicate address detection mode -U : Unsolicited ARP mode, update your neighbours -A : ARP answer mode, update your neighbours -V : print version and exit -c count : how many packets to send -w timeout : how long to wait for a reply -I device : which ethernet device to use (eth0) -s source : source ip address destination : ask for what ip address resulting resolv.conf shows that the defaul was chosen. europa:/# cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 172.17.1.1 search .xy.de .test3.de -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: /etc/alternative/ How to use it?
Hi, is there somewhere a developer HOWTO describing how I may add /etc/alternatives support to my own packages in the right canonical way? I've searched the web but couldn't find any developer information. TIA for any links. WR, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Xen 3.0.3 and VLAN
Hi Tim, the missing comma after the bridge specification in the vif declaration of the domU cfg's seemed to have caused the problems I encountered. Now I'm using the xen network-dummy script and have succesfully in dom0 put up 3 bridges belonging to different VLAN's and can assign these bridges to some domU's so that their eth0 belongs to that specific VLAN. So I reached the goal I wanted. Thanks again! But I wonder if there is a way to enhance it. Now dom0 uses xenbr94 directly as it's standard interface to the world. The default xen network-bridge magic does it somehow different: it renames eth0 to peth0 and creates a new eth0 which is then added to the xenbr0 - which is then used by dom0 for communication instead of using a xenbr directly. I could not figure out yet how to create such a new interface (using somehow the netloop driver?) and have the dom0 use that instead. Googling for netloop etc brought no enlightment.. Do you know how to do that / by what commands? How is xen creating the similar vifX.Y interfaces ? Perhaps you can help me with that.. BTW: I'm also using the ocfs2 filesystem with two nodes and playing around with live migration. Is there a way to speed up to make the cisco switches in our network learn faster that a domU IP is now reachable on another node's mac ? Either via configuration on the switches or in the nodes bridge configuration? WR, Bruno my /etc/network/interfaces contains: auto lo iface lo inet loopback auto xenbr94 iface xenbr94 inet dhcp bridge_fd 0 bridge_maxwait 0 bridge_helo 0 bridge_stp on bridge_ports eth0.94 auto xenbr64 iface xenbr64 inet manual bridge_fd 0 bridge_maxwait 0 bridge_helo 0 bridge_stp on bridge_ports eth0.64 auto xenbr32 iface xenbr32 inet manual bridge_fd 0 bridge_maxwait 0 bridge_helo 0 bridge_stp on bridge_ports eth0.32 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Antwort: Re: Xen 3.0.3 and VLAN
Tim Post [EMAIL PROTECTED] schrieb am 03.11.2006 02:34:42: Hi Tim, Try using brctl to manually create the bridge, then pin the nic to the bridge manually (quick fix), if that works just toss something in init.d to do so. Thanks for your advice! I adjusted the interfaces file so that the xenbr0 ius created there, the system can be sucessfully booted with the attached configuration communicating over VLAN 94 with the network. I do not yet understand which component is going to create the vifX.Y interfaces needed to start successfully the DomU's ? xm create yields: Error: Device 0 (vif) could not be connected. Hotplug scripts not working. The system ist running the latest debian/unstable tree, so there is udev but no hotplug package. /etc/network/interfaces: auto lo iface lo inet loopback auto eth0.94 iface eth0.94 inet static address 172.17.94.48 netmask 255.255.255.0 gateway 172.17.94.254 broadcast 172.17.94.255 auto xenbr0 iface xenbr0 inet static address 172.17.94.48 netmask 255.255.255.0 gateway 172.17.94.254 broadcast 172.17.94.255 bridge_fd 0 bridge_maxwait 0 bridge_helo 0 bridge_stp off bridge_ports eth0.94 # some other interface used as interconnect to second xen-maschine auto eth1 iface eth1 inet static address 10.10.10.1 netmask 255.255.255.0 /etc/xen/xend-config.sxp: (xend-http-server yes) (xend-unix-server yes) (xend-tcp-xmlrpc-server yes) (xend-unix-xmlrpc-server yes) (xend-relocation-server yes) (xend-address '') (xend-relocation-address '') (xend-relocation-hosts-allow '') (network-script network-dummy) (vif-script vif-bridge) (dom0-min-mem 196) (dom0-cpus 0) domU.cfg: kernel = '/boot/vmlinuz-2.6.18-1-xen-vserver-686' ramdisk = '/boot/initrd.img-2.6.18-1-xen-vserver-686' memory = '256' root= '/dev/sda1 ro' disk= [ 'file:/mnt/vserver/images/domains/openser/disk.img,sda1,w', 'file:/mnt/vserver/images/domains/openser/swap.img,sda2,w' ] name= 'openser' dhcp = 'dhcp' vif = [ 'bridge=xenbr0 mac=00:16:3e:06:a2:f8' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash= 'restart' ifconfig: eth0 Protokoll:Ethernet Hardware Adresse 00:0F:20:98:A2:B4 inet6 Adresse: fe80::20f:20ff:fe98:a2b4/64 Gltigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6342 errors:0 dropped:0 overruns:0 frame:0 TX packets:716 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlnge:1000 RX bytes:489663 (478.1 KiB) TX bytes:130201 (127.1 KiB) Interrupt:16 eth1 Protokoll:Ethernet Hardware Adresse 00:0F:20:98:A2:B5 inet Adresse:10.10.10.1 Bcast:10.10.10.255 Maske:255.255.255.0 inet6 Adresse: fe80::20f:20ff:fe98:a2b5/64 Gltigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlnge:1000 RX bytes:0 (0.0 b) TX bytes:492 (492.0 b) Interrupt:17 eth0.94 Protokoll:Ethernet Hardware Adresse 00:0F:20:98:A2:B4 inet6 Adresse: fe80::20f:20ff:fe98:a2b4/64 Gltigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3406 errors:0 dropped:0 overruns:0 frame:0 TX packets:711 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlnge:0 RX bytes:194066 (189.5 KiB) TX bytes:123921 (121.0 KiB) loProtokoll:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6 Adresse: ::1/128 Gltigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:70 errors:0 dropped:0 overruns:0 frame:0 TX packets:70 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlnge:0 RX bytes:5560 (5.4 KiB) TX bytes:5560 (5.4 KiB) xenbr0Protokoll:Ethernet Hardware Adresse 00:0F:20:98:A2:B4 inet Adresse:172.17.94.48 Bcast:172.17.94.255 Maske:255.255.255.0 inet6 Adresse: fe80::20f:20ff:fe98:a2b4/64 Gltigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3403 errors:0 dropped:0 overruns:0 frame:0 TX packets:705 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlnge:0 RX bytes:193856 (189.3 KiB) TX bytes:123453 (120.5 KiB) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Xen 3.0.3 and VLAN
Hi, has anyone experience with a system configuration using xen 3.0.x and vlan ? The box is connected to a cisco switch via 802.11q and has access to two vlans. in /etc/network/interfaces instead of eth0 only eth0.2 is configured. auto eth0.2 iface eth0.2 inet static address 10.0.0.1 netmask 255.255.255.0 The Dom0 can succesfully communicate with the outside world, but no DomU can be started regardless what I'm trying in xend-config.sxp, the xenbr0 isn't created upon xend-start. xm create yields: Error: Device 0 (vif) could not be connected. Backend device not found. (vif-script vif-bridge) (network-script 'network-bridge netdev=eth0') or (network-script 'network-bridge netdev=eth0.2') TIA for any hints, Bruno -- [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
etch: KDE screensaver not working
Hi, on my debian/etch system with KDE - which I continiously aptitiude (dist-)upgrade every few days since pre-sarge, I have the problem that the screensaver does not kick-in. automatically. Via the KDE control center it is enabled (empty screen) and set to start after twenty minutes and lock after 120 seconds. How may I find out why it doesn't work on this system? What config files should I check? On similar other systems of mine it works as expected. TIA for any hints, Bruno dpkg -l | grep screen ii electricsheep 2.6.6-1 screensaver showing collective dream of sleeping computers ii kscreensaver 3.5.3-1 additional screen savers released with KDE ii kscreensaver-xsavers 3.5.3-1 KDE hooks for standard xscreensavers ii libxss-dev 1.0.1-4 X11 Screen Saver extension library (development headers) ii libxss1 1.0.1-4 X11 Screen Saver extension library ii x11proto-scrnsaver-dev 1.1.0.0-1X11 Screen Saver extension wire protocol ii xscreensaver 4.24-4 Automatic screensaver for X ii xscreensaver-gl 4.24-4 GL(Mesa) screen hacks for xscreensaver -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Any success in installing Linux Lotus Notes Client 7.0.1 on Etch?
Hi all, the Linux-Version of the Lotus Notes client 7.0.1 is now available. It is intended for Redhat 4 with Mozilla 1.7. Had someone already success in installing it on Etch? For me the installer exits after complaining that it could not validate the mozilla version, although the latest mozilla packages are installed. running the installer with strace didn't provide any hints to me. Perhaps someone already had more success? TIA, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
sid: KDE menu entries lost how to recreate?
Hi all, I'm running debien/unstable and performing nearly daily an aptitude upgrade. Before ~ 2 weeks I lost all KDE Start menu entries. Only bookmars, exec command, start new session, lock desktop, logout are still there. Is there a procedure to recreate the menu entries for all installed appliactions?! TIA, Bruno -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
